Safety cage compatible shown in with metal blades and decorative guard shown in Textured Bronze with wood blades Location: All Finishes with Metal Blades.** Proudly Assembled With U.S. Labor Acqua Designed in 2008 shown in Chrome with wood blades The Acqua rotational fan is thoughtfully designed to resemble the molecular structure of water, Earthʼs most precious resource. The Acqua offers fluid lines and quiet axial rotation. The fan heads can be infinitely positioned in 180-degree arcs for optimum air movement; the greater the angles of the motors to the horizontal support rods (up or down), the faster the axial rotation. A slow, controlled axial rotation is achieved by both fan head position and fan blade speed. Matthews rotational fans circulate heat and air-conditioning more efficiently than traditional paddle fans. Available in the following finishes: polished chrome, brushed nickel or textured bronze. Constructed of cast aluminum and heavy stamped steel. Limited Lifetime Warranty The Acqua is available with the following blade options: hand-balanced metal fan head with decorative metal blade guards hand-balanced metal fan head with metal safety cages for low ceiling applications hand-balanced solid wood fan head without blade guards Standard equipment: One downrod of 10". 5", 20", 30", 48" or 72" downrods also available. Hand-held and wall-mountable 3-speed remote control. low voltage 50 watt MR-16 GU10 down light Vaulted ceiling canopy for up to 29 degrees.
MATT H EWS FAN COMPANY Acqua weight: 27 lbs voltage: 110/220 6" diameter 2" 5", 10", 20", 30", 48" or 72" field cuttable downrods available SKU Naming Convention AQ-XX-XXX (Model-Finish-Blade Type) Finishes Blade Type - BN Wood - WD Chrome - CR Metal w/ Decorative Cage - MTL Textured Bronze - TB Metal w/ Safety Cage - MSAF 9" 13" 16" 5" 39" wood fan head / 37" metal fan head Increasing Angles of Fan Heads to Support Poles Increases Speed of Axial Rotation CFM: 3949 (Metal Fan Head) Blade Pitch 31 Optimum Fan Head Position is 60 CFM: 4350 (Wood Fan Head) Blade Pitch 19 1) The Acqua can be mounted with any one of the following downrod lengths: 5", 10", 20", 30", 48" and 72". 2) Safety cages available for low ceiling applications. 3) The Acqua is compatible with an accessory Lutron decora style wall control: SFSQ LF. Summer 2015 ** location: All standard finshes. Not recommended for salt water/ocean front applications. ** Location 1881 Industrial Drive Libertyville, IL 60048 Tele: 847.680.9043 Fax: 847.680.8140 www.matthewsfanco.com
Matthews Fan Company 1881 Industrial Dr Libertyville, IL 60048 USA Tel: 847-680-9043 Fax: 847-680-8140 www.matthewsfanco.com
America weight: 21 lbs voltage: 110* 5.25" diameter 9.5" Over-all Drop with close mount 3 down rod 52" Matthews Fan Company s America Ceiling Fan Specifications: Diameter: 52 quality, white ceiling fan with x 5 roundededge blades Control: pull-chain control. wall control available as accessory Close Mount: 9.25 Over-all Drop with 3 standard down rod Lead Length: 54 Motor Size: 172 mm x 14 mm (3 speeds and forward/reverse) Blade Pitch: 12 degrees Mounting: hang straight canopy with cast aluminum ball/socket and bracket assembly Voltage: 120 kit: Available as accessory with either (X2) 13w or (X2) 26w GU24 CFL and frosted glass bowl USA Applicability to Buy American Act: Domestic Construction Materials Clause (Feb 2009): 52-225-9 (4)(2)(i). The cost of its components mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. Breakdown of Origin of Materials: Ceiling fan parts are made in Taiwan, a World Trade Organization Government Procurement Agreement country. Final assembly and UL 507 electrical compliance testing will be done in the US. US labor will be used in the assembly, handling and testing of this fan. ITEM ORIGIN % of COST of ITEM Fan Components Taiwan 41.18% U.S. Labor MFC Facility* USA 34.46% Domestic Shipping USA 10.34% International Shipping USA 11.20% US Duty USA 1.96% Shipping Insurance USA 0.88% * US labor cost includes, but is not limited to: hands-on assembly, packaging and warehousing. Performance: High setting: RPM s: 195, Watts: 65, CFM: 5370, CFM/Watt: 83, Amps:.54 Medium setting: RPM s: 133, Watts: 31, CFM: 3540, CFM/Watt: 114, Amps:.39 Low Setting: RPM s: 72, Watts: 10, CFM: 1860, CFM/Watt: 186, Amps:.22 Safety Listing: UL Listed - Dry Location Energy Rating: Energy Star Rated/Approved Warranty: Limited Lifetime Taiwan Applicability to Buy American Act - Construction Materials Under Trade Agreements: Construction Materials Clause (Aug 2009): 52-225-11 as prescribed in 25-1102. Ceiling fan parts and assembly comprise a WTO GPA country end-product. Breakdown of Origin of Materials: Ceiling fan is made in Taiwan, a World Trade Organization Government Procurement Agreement country. ITEM ORIGIN % of COST of ITEM Ceiling Fan Components/ Taiwan 74.59% Assembly Labor Shipping / Handling / USA 25.41% Insurance / Duty Matthews Fan Company 1881 Industrial Dr Libertyville, IL 60048 USA Tel: 847-680-9043 Fax: 847-680-8140 www.matthewsfanco.com
Ar Ruthiane Designed in 2004 shown in Copper with wood blades Safety cage compatible Suitable for ** Location U.S.A. Components and Labor Handmade shown in Chrome with metal blades and decorative cage The Ar Ruthiane's unique hourglass support arms grasp bullet-shaped motor housings which rotate about its teardrop center. The fan heads can be infinitely positioned in 180- degree arcs for optimum air movement; the greater the angles of the motors to the horizontal support rods (up or down), the faster the axial rotation. A slow, controlled axial rotation is achieved by both fan head position and fan blade speed. Matthews rotational fans circulate heat and air conditioning more efficiently than traditional paddle fans. Constructed of cast aluminum, heavy spun and stamped steel, the Ar Ruthiane carries a limited lifetime warranty. Each unique motor mount and fan head knob is made of genuine marbleized Bakelite. The Ar Ruthiane is available with the following blade options: metal fan heads with decorative metal blade guards solid, ecologically harvested Brazilian mahogany fan heads without blade guards metal fan heads with metal safety cages for use in low ceiling applications (7 ft in US / 8.2 ft in Canada) Standard Finishes Black Bronze (Plate) Chrome Bronzette (Powdercoat) Copper Brass Copper Black Brass Chrome Blue Green White Dark Blue Dark Green Purple Orange Yellow Red Special Order Finishes
MATT H EWS FAN COMPANY www.matthewsfanco.com Ar Ruthiane weight: 21 lbs voltage: 110/220 5.5" diameter 5, 10", 20", 30", 48" or 72" downrods available MATTHEWS GERBAR D I S T I N C T L Y H A N D M A D E 16" 12" 13" 48" mahogany fan head / 46" metal fan head Increasing Angles of Fan Heads to Support Poles Increases Speed of Axial Rotation Optimum Fan Head Position is 60 CFM: 4240 (Wood Fan Head) Blade Pitch 19 CFM: 3201 (Metal Fan Head) Blade Pitch 31 Standard Equipment: Lutron decora style SFS 5E fully variable wall switch in white 10" downrod. 5", 20", 30", 48" or 72" downrods available. Downrods can be easily field cut; they are not threaded. Flat ceiling canopy. Compatible with 29 vaulted ceiling canopy accessory. Metal fan heads with protective powder or clear coatings are suitable for Location. Safety cages available for low ceiling applications. Summer 2015 ** location with powder or clear coat only. Not recommended for salt water/ocean front applications. ** Location 1881 Industrial Drive Libertyville, IL 60048 Tele: 847.680.9043 Fax: 847.680.8140
Bianca Direcional Designed in 2000 Safety cage compatible Suitable for ** Location U.S.A. Components and Labor Shown in with metal blades and decorative cage Handmade shown in Black with wood blades Unique and versatile, the fan head of the Bianca Direcional ceiling fan can be infinitely positioned in a 180-degree arc, forward and reverse, to provide maximum, directional airflow. The Bianca can be hung in small, awkward spaces or in front of HVAC ducts to make more efficient the heating, ventilation or air conditioning of any space. Constructed of cast aluminum, heavy spun and stamped steel. Each unique motor mount and fan head knob is made of genuine marbleized Bakelite. Limited Lifetime Warranty The Bianca is available with the following blade options: metal fan head with decorative metal blade guards solid, ecologically harvested Brazilian mahogany fan head without blade guards metal fan head with metal safety cages for use in low ceiling applications (7 ft in US / 8.2 ft in Canada) Standard Finishes Black Bronze (Plate) Chrome Bronzette (Powdercoat) Copper Brass Copper Black Brass Chrome Blue Green White Dark Blue Dark Green Purple Orange Yellow Red Special Order Finishes
MATT HEWS FAN COMPANY 5.5" diameter Bianca Direcional weight: 7 lbs voltage: 110* MATTHEWS GERBAR D I S T I N C T L Y H A N D M A D E 5", 10", 20", or 30" downrods available Fan head is infinitely adjustable 180 in forward and reverse positions. 16" Wood Fan Head 13" Metal Fan Head CFM: 1600 (Metal Fan Head) Blade Pitch 31 Distance between top of yolk and bottom of blades is as follows: 12" for metal blades 13" for wood blades CFM: 2120 (Wood Fan Head) Blade Pitch 19 Standard Equipment: Lutron decora style SFS 5E fully variable wall switch in white 10" downrod. 5", 20" or 30" downrods available Flat ceiling canopy. Not compatible with vaulted ceiling canopy. Metal bladed fans with protective powder or clear coatings are suitable for Location. Safety cages available for low ceiling applications. *Please contact us for 220V conversions. ** location with powder or clear coat only. Not recommended for salt water/ocean front applications. ** Location Summer 2015 1881 Industrial Drive Libertyville, IL 60048 Tele: 847.680.9043 Fax: 847.680.8140 www.matthewsfanco.com
Brisa 2000 Designed in 2000 Safety cage compatible shown in Copper with wood blades Suitable for ** Location U.S.A. Components and Labor Handmade shown in Bronze with wood blades Like satellites orbiting a planet, the Brisa's select mahogany blade head and lunar counterweight gently revolve about its spherical gear housing. The fan head can be infinitely positioned in a 180-degree arc for optimum air movement; the greater the angle of the motor to the horizontal support rods (up or down), the faster the axial rotation. A slow, controlled axial rotation is achieved by both fan head position and fan blade speed. Matthews rotational fans circulate heat and air conditioning more efficiently than traditional paddle fans. Constructed of cast aluminum, heavy spun and stamped steel, the Brisa carries a limited lifetime warranty. Each unique motor mount and fan head knob is made of genuine marbleized Bakelite. The Brisa is available with the following blade options: metal fan head with decorative metal blade guards solid, ecologically harvested Brazilian mahogany fan head without blade guards metal fan head with metal safety cages for use in low ceiling applications (7 ft in US / 8.2 ft in Canada) Standard Finishes Black Bronze (Plate) Chrome Bronzette (Powdercoat) Copper Brass Copper Black Brass Chrome Blue Green White Dark Blue Dark Green Purple Orange Yellow Red Special Order Finishes
MATT HEWS FAN COMPANY www.matthewsfanco.com Brisa 2000 weight: 21 lbs voltage: 110/220 CFM: 1600 (Metal Fan Head) Blade Pitch 31 CFM: 2120 (Wood Fan Head) Blade Pitch 19 5.5" diameter MATTHEWS GERBAR 5", 10", 20", 30", 48" or 72" downrods available D I S T I N C T L Y H A N D M A D E 16" 7" 40" mahogany fan head / 39" metal fan head Increasing Angles of Fan Heads to Support Poles Increases Speed of Axial Rotation Optimum Fan Head Position is 60 Standard Equipment: Lutron decora style SFS 5E fully variable wall switch in white 10" downrod. 5", 20", 30", 48" or 72" downrods available. Downrods can be easily field cut; they are not threaded. Flat ceiling canopy. Compatible with 29 vaulted ceiling canopy accessory. Metal fan heads with protective powder or clear coatings are suitable for Location. Safety cages available for low ceiling applications. Summer 2015 ** location with powder or clear coat only. Not recommended for salt water/ocean front applications. ** Location 1881 Industrial Drive Libertyville, IL 60048 Tele: 847.680.9043 Fax: 847.680.8140 www.matthewsfanco.com
Bruna Parede Designed in 2007 Safety cage equipped Suitable for ** Location U.S.A. Components and Labor Handmade shown in with metal blades and safety cage shown in Bronzette with metal blades and safety cage The Bruna Parede is reminiscent of the wall fans of the early 20th century. The fan head of the Bruna Parede wall mounted fan can be infinitely positioned vertically and horizontally across 180-degree arcs to provide maximum directional airflow. It can be mounted in small, awkward spaces or in front of HVAC ducts to make more efficient the heating, ventilation or air conditioning of any space. Constructed of cast aluminum, heavy spun and stamped steel, the Bruna carries a limited lifetime warranty. Equipped with hand-balanced metal fan head with metal safety cages. location rated if ordered with protective powder or clear coatings. Bruna Parede does not oscillate. Standard Finishes Black Bronze (Plate) Chrome Bronzette (Powdercoat) Copper Brass Copper Black Brass Chrome Blue Green White Dark Blue Dark Green Purple Orange Yellow Red Special Order Finishes
MATT H EWS FAN COMPANY www.matthewsfanco.com Bruna Parede weight: 8 lbs voltage: 110/220 16" MATTHEWS GERBAR D I S T I N C T L Y H A N D M A D E 13" Infinitely Adjustable 180 Vertically and Horizontally 21" CFM: 1600 Blade Pitch 31 5.5" diameter optimum fan head position: 45 to yoke Standard Equipment: Safety cage Lutron decora style SFS 5E fully variable wall switch in white Side mounted wall junction box Summer 2015 ** Location ** location with powder or clear coat only. Not recommended for salt water/ocean front applications. 1881 Industrial Drive Libertyville, IL 60048 Tele: 847.680.9043 Fax: 847.680.8140 www.matthewsfanco.com
shown in Matte Black Bubble Designed in 2013 shown in Gloss White The Bubble, Matthews Fan Companyʼs modular ceiling fan, is a space-age marvel. Its stunning contours and smooth surface give the fan an otherworldly air. The Bubble is available in two finishes: gloss white and dramatic matte black. The Bubbleʼs remote control determines the fanʼs speed, direction and illumination. The integrated, energy-saving 4 Watt LED light kit provides ambient light. 60" diameter polycarbonate modular body Energy efficient, ultra-quiet, six-speed, reversible DC motor with new, reliable technology. location finishes: gloss white or matte black Limited Lifetime Warranty Standard equipment: One downrod of 10". 5", 20", 30", 48" or 72" downrods also available. Vaulted ceiling mount canopy for up to 30 degrees. Reverse on 6-speed hand-held and wall-mountable remote control. Location: All Finishes** Integrated, replaceable and dimmable LED light. 4W. CRI: 81.5. Hours: 36,000 Lumens: 157.6 Optional light cap cover
MATT H EWS FAN COMPANY Bubble weight: 24 lbs voltage: 110* *Please contact us for possible 220 conversion 6" diameter 2" 5", 10", 20", 30", 48" or 72" downrods available 10" 8" Blade Pitch 21 60" SKU Naming Convention BU-XX (Model-Finish) Finishes Gloss White - WH Matte Black - BK CFM 6947 1) The Bubble is compatible with flat or vaulted ceilings and can be mounted with any one of the following downrod lengths: 5", 10", 20", 30", 48" and 72". 2) Bubble is also compatible with a proprietary decora style accessory wall control: DC WC. Lamping Color Temperature: 2700K CRI: 81.5 Lumens: 157.6 Watts: 4 Hours: 36,000 ** location: All standard finishes. Not recommended for salt water/ocean front applications. ** Location Summer 2015 1881 Industrial Drive Libertyville, IL 60048 Tele: 847.680.9043 Fax: 847.680.8140 www.matthewsfanco.com
CinniDesigned in 2011 shown in textured bronze Safety cage equipped Location: All Finishes with Metal Blades.** Proudly Assembled With U.S. Labor shown in brushed nickel shown in polished chrome Designed in the Art Nouveau aesthetic with a grand, arching gooseneck, the über-cool Cinni oscillating, 3 speed table fan provides stylish multi-directional airflow. Available in the following finishes: polished chrome, brushed nickel or textured bronze. Constructed of cast aluminum and heavy stamped steel. Limited Lifetime Warranty Equipped with hand-balanced metal blades and metal safety cages.
MATT H EWS FAN COMPANY 13" 90 oscillation left - right 18" Blade Pitch 31 CFM: 1147 Cinni weight: 14 lbs voltage: 110/220 3 speed fan motor control "On Off" oscillation control SKU Naming Convention CI-XX (Model-Finish) Finishes - BN Chrome - CR Textured Bronze - TB 14" 9" ** location: All standard finishes. Not recommended for salt water/ocean front applications. ** Location 1881 Industrial Drive Libertyville, IL 60048 Tele: 847.680.9043 Fax: 847.680.8140 www.matthewsfanco.com Summer 2015
C IVDesigned in 2013 shown in Chrome with Walnut blades shown in with Rosewood blades shown in Textured Bronze with Walnut blades The C IV, organic and modular with twin curved concave blades, is sure to tilt heads upward. Its commanding 60 inch span of resilient polycarbonate construction maintains warmth in either Walnut or Rosewood tones. 60" diameter with either Walnut or Rosewood tone blades. Energy efficient, reversible, 3-speed AC motor. location finishes: brushed nickel, polished chrome or textured bronze. Constructed of cast aluminum, polycarbonate and heavy stamped steel. Limited Lifetime Warranty Standard equipment: One downrod of 10". 5", 20", 30", 48" or 72" downrods also available. Vaulted ceiling mount canopy for up to 30 degrees. Reverse on 3 speed hand-held, wall-mountable remote control. Integrated 16W LED light is replaceable and dimmable. 3000K. CRI: 81.5. Hours: 36,000 Lumens: 465.4 Optional light cap cover Location: All Finishes**
MATT H EWS FAN COMPANY C IV weight: 28 lbs voltage: 110* *Please contact us for possible 220 conversion 6" diameter 2.5" 5", 10", 20", 30", 48" or 72" field cuttable downrods available 42" or 52" 7" 6" 12" Blade Pitch 14 60" SKU Naming Convention CIV-XX-XX (Model-Finish-Wood) Finishes Blade Finish - BN Walnut - WN Chrome - CR Rosewood - RW Textured Bronze - TB CFM 6539 1) The C IV is compatible with flat or vaulted ceilings and can be mounted with any one of the following downrod lengths: 5", 10", 20", 30", 48" and 72". 2) The C IV is also compatible with an accessory Lutron decora style wall control: SFSQ LF. Lamping Color Temperature: 3000K CRI: 81.5 Lumens: 465.4 Watts: 16 Hours: 36,000 Summer 2015 ** location: All standard finishes. Not recommended for salt water/ocean front applications. 1881 Industrial Drive Libertyville, IL 60048 Tele: 847.680.9043 Fax: 847.680.8140 www.matthewsfanco.com
Safety cage compatible shown in Textured Bronze with metal blades and decorative guard Location: All Finishes with Metal Blades.** Proudly Assembled With U.S. Labor shown in Chrome with metal blades and decorative guard Dagny Designed in 2011 shown in with wood blades The double-headed rotational fan, Dagny, with cylindrical central housing and straight, parallel arms, is designed in the retrospective aesthetic. The Dagny offers fluid lines and quiet axial rotation. The fan heads can be infinitely positioned in 180-degree arcs for optimum air movement; the greater the angles of the motors to the horizontal support rods (up or down), the faster the axial rotation. A slow, controlled axial rotation is achieved by both fan head position and fan blade speed. Matthews rotational fans circulate heat and air-conditioning more efficiently than traditional paddle fans. The Dagny is available in the following finishes: polished chrome, brushed nickel or textured bronze. Constructed of cast aluminum and heavy stamped steel. Limited Lifetime Warranty The Dagny is available with the following blade options: hand-balanced metal fan heads with decorative metal blade guards hand-balanced metal fan heads with metal safety cages for low ceiling applications hand-balanced solid wood fan heads without blade guards Standard equipment: One downrod of 10". 5", 20", 30", 48" or 72" downrods also available. Hand-held and wall-mountable 3-speed remote control. Vaulted ceiling canopy for up to 29 degrees.
MATT HEWS FAN COMPANY Dagny weight: 22 lbs voltage: 110* *Please contact us for possible 220 conversion 6" diameter 2" 5", 10", 20", 30", 48" or 72" downrods available 7" 16" 13" 5" Wood Blades 41" wood fan head / 39" metal fan head Metal Blades Increasing Angles of Fan Heads to Support Poles Increases Speed of Axial Rotation Optimum Fan Head Position is 60 CFM: 4530 (Wood Fan Head) Blade Pitch 19 SKU Naming Convention DG-XX-XXX (Model-Finish-Blade Type) Finishes Blade Type - BN Wood - WD Chrome - CR Metal w/ Decorative Cage - MTL Textured Bronze - TB Metal w/ Safety Cage - MSAF CFM: 3949 (Metal Fan Head) Blade Pitch 31 1) The Dagny can be mounted with any one of the following downrod lengths: 5", 10", 20", 30", 48" and 72". 2) Safety cages available for low ceiling applications. 3) The Dagny is compatible with an accessory Lutron decora style wall control: SFSQ LF. Summer 2015 ** location: All standard finshes. Not recommended for salt water/ocean front applications. ** Location 1881 Industrial Drive Libertyville, IL 60048 Tele: 847.680.9043 Fax: 847.680.8140 www.matthewsfanco.com
shown in with wood blades shown in Chrome with metal blades and decorative guard Safety cage compatible Location: All Finishes with Metal Blades.** Proudly Assembled With U.S. Labor Dagny LK Designed in 2013 shown in Textured Bronze with metal blades and decorative guard With clean, fluid lines, the Dagny LK rotational fan is a striking centerpiece in any space. Its movement about its cylindrical center housing is smooth and quiet. Dagny LKʼs dual fan heads can be infinitely positioned in 180-degree arcs for optimum and customized air movement. As the angle between the fan heads and the horizontal support rods is increased, so does the speed of Dagny LKʼs axial rotation. Matthews rotational fans circulate heat and air conditioning more efficiently than traditional paddle fans. The Dagny LK is available in the following finishes: polished chrome, brushed nickel, or textured bronze. Constructed from cast aluminum and heavy stamped steel. Limited Lifetime Warranty The Dagny LK is available with the following blade options: hand-balanced metal fan heads with decorative metal blade guards hand-balanced metal fan heads with metal safety cages for low-ceiling applications hand-balanced solid wood fan heads without blade guards Standard equipment: One downrod of 10". 5", 20", 30", 48" or 72" downrods also available. Hand-held and wall-mountable 3-speed remote control. 2 x 35 watt E11 base halogen light kit Vaulted ceiling mount canopy for up to 29 degrees.
MATT H EWS FAN COMPANY Dagny LK weight: 23 lbs voltage: 110* *Please contact us for possible 220 conversion 6" diameter 2" 5", 10", 20", 30", 48" or 72" downrods available 7" 16" 2" 3" 13" 41" wood fan head / 39" metal fan head Increasing Angles of Fan Heads to Support Poles Increases Speed of Axial Rotation Optimum Fan Head Position is 60 CFM: 4530 (Wood Fan Head) Blade Pitch 19 SKU Naming Convention DGLK-XX-XXX (Model-Finish-Blade Type) Finishes Blade Type Textured Bronze - TB Wood - WD - BN Metal w/ Decorative Cage - MTL Chrome - CR Metal w/ Safety Cage - MSAF CFM: 3949 (Metal Fan Head) Blade Pitch 31 1) The Dagny LK can be mounted with any one of the following downrod lengths: 5", 10", 20", 30", 48" and 72". 2) Safety cages available for low ceiling applications. 3) The Dagny LK is compatible with an accessory Lutron decora style wall control: SFSQ LF. Summer 2015 ** location: All standard finshes. Not recommended for salt water/ocean front applications. ** Location 1881 Industrial Drive Libertyville, IL 60048 Tele: 847.680.9043 Fax: 847.680.8140 www.matthewsfanco.com
Diane DianDes Diansigned Designed in 2008 shown in Textured Bronze with wood blades shown in with wood blades Safety cage compatible shown in Chrome with metal blades and decorative guard Location: All Finishes with Metal Blades.** Proudly Assembled With U.S. Labor The Diane forward and reverse sweeping oscillating, directional fan head provides maximum, forward and reverse airflow. The Diane can be hung in small, awkward spaces or in front of HVAC ducts to make more efficient the heating, ventilation or air conditioning of any space. The Diane is available in the following finishes: polished chrome, brushed nickel or textured bronze. Constructed of cast aluminum and heavy stamped steel. Limited Lifetime Warranty The Diane is available with the following blade options: hand-balanced metal fan heads with decorative metal blade guards hand-balanced metal fan heads with metal safety cages for low ceiling applications hand-balanced solid wood fan heads without blade guards Standard equipment: One downrod of 10". 5", 20", 30", 48" or 72" downrods also available. Hand-held and wall-mountable 3-speed remote control to operate both blades and oscillation function. Vaulted ceiling mount canopy for up to 29 degrees.
MATT H EWS FAN COMPANY Diane weight: 12 lbs voltage: 110/220 SKU Naming Convention DI-XX-XXX (Model-Finish-Blade Type) Finishes Blade Type - BN Wood - WD Chrome - CR Metal w/ Decorative Cage - MTL Textured Bronze - TB Metal w/ Safety Cage - MSAF 6" diameter 2" 5", 10", 20", 30, 48 or 72" field cuttable downrods available CFM: 1609 (Wood Fan Head) Pitch 19 10" CFM: 1423 (Metal Fan Head) Pitch 31 12" 90 forward & reverse sweeping oscillation function 16" 13" 1) The Diane can be mounted with any one of the following downrod lengths: 5", 10", 20", 30", 48" and 72". 2) Safety cages available for low ceiling applications. 3) The Diane is compatible with an accessory Lutron decora style wall control: SFSQ LF. ** location: All standard finshes. Not recommended for salt water/ocean front applications. ** Location 1881 Industrial Drive Libertyville, IL 60048 Tele: 847.680.9043 Fax: 847.680.8140 www.matthewsfanco.com Summer 2015
shown in Stainless with optional metal cover shown in Stainless Donaire Designed in 2015 shown in Bronze with optional metal cover shown in Bronze With teardrop motor housing, the Donaire 316 marine grade stainless steel wet location ceiling fan is transitional in design. Donaire is finished in brushed bronze or brushed stainless and is equipped with an 18W LED, dimmable light kit with optional metal cover. 52" diameter with three ABS blades. Energy efficient three-speed, reversible 3-speed AC motor. Finishes: brushed stainless or brushed bronze. Constructed of 316 marine grade stainless steel. Limited Lifetime Warranty Standard equipment: One downrod of 10". 5", 20", 30", 48" or 72" downrods also available. Vaulted ceiling mount canopy for up to 30 degrees. Reverse on 3-speed hand-held, wall-mountable remote control. Integrated 18W LED light is replaceable and dimmable. 3000K. CRI: 81.5. Hours: 36,000 Lumens: 510.8 Wet Location: All Finishes**
MATT H EWS FAN COMPANY Donaire weight: 29 lbs voltage: 110* *Please contact us for possible 220 conversion 6" diameter Wet Location: All Finishes** 2.5" 5", 10", 20", 30", 48" or 72" field cuttable downrods available 6.5" 6" Blade Pitch 14 10" 52" SKU Naming Convention DA XX (Model-Finish) Finishes Stainless - BS Bronze - BB CFM 6573 1) The Donaire is compatible with flat or vaulted ceilings and can be mounted with any one of the following downrod lengths: 5", 10", 20", 30", 48" and 72". 2) The Donaire is also compatible with an accessory Lutron decora style wall control: SFSQ LF. Lamping Color Temperature: 3000K CRI: 81.5 Watts: 18 Hours: 36,000 Lumens: 510.8 Winter 2016 1881 Industrial Drive Libertyville, IL 60048 Tele: 847.680.9043 Fax: 847.680.8140 www.matthewsfanco.com
Duplo-Dinamico Designed in 1963 shown in Bronze with wood blades Safety cage compatible Suitable for ** Location U.S.A. Components and Labor shown in Chrome with metal blades and decorative cage Handmade Few designs can match the timeless and sophisticated aesthetic of the Duplo-Dinamico rotational fan. Other manufacturers have tried to reproduce this unique design, though all have proven to be of lesser quality and durability. The fan heads can be infinitely positioned in 180-degree arcs for optimum air movement; the greater the angles of the motors to the horizontal support rods (up or down), the faster the axial rotation. A slow, controlled axial rotation is achieved by both fan head position and fan blade speed. Matthews rotational fans circulate heat and air conditioning more efficiently than traditional paddle fans. Constructed of cast aluminum, heavy spun and stamped steel, the Duplo carries a limited lifetime warranty. Each unique motor mount and fan head knob is made of genuine marbleized Bakelite. The Duplo is available with the following blade options: metal fan heads with decorative metal blade guards solid, ecologically harvested Brazilian mahogany fan heads without blade guards metal fan heads with metal safety cages for use in low ceiling applications (7 ft in US / 8.2 ft in Canada) Standard Finishes Black Bronze (Plate) Chrome Bronzette (Powdercoat) Copper Brass Copper Black Brass Chrome Blue Green White Dark Blue Dark Green Purple Orange Yellow Red Special Order Finishes
MATT H EWS FAN COMPANY www.matthewsfanco.com Duplo-Dinamico weight: 19 lbs voltage: 110/220 5.5" diameter 5, 10", 20", 30", 48" or 72" downrods available MATTHEWS GERBAR D I S T I N C T L Y H A N D M A D E 12" 6" 13" 3" 36" mahogany fan head / 39" metal fan head Increasing Angles of Fan Heads to Support Poles Increases Speed of Axial Rotation Optimum Fan Head Position is 60 CFM: 3217 (Wood Fan Head) Blade Pitch 19 CFM: 3201 (Metal Fan Head) Blade Pitch 31 Standard Equipment: Lutron decora style SFS 5E fully variable wall switch in white 10" downrod. 5", 20", 30", 48" or 72" downrods available. Downrods can be easily field cut; they are not threaded. Flat ceiling canopy. Compatible with 29 vaulted ceiling canopy accessory. Metal fan heads with protective powder or clear coatings are suitable for Location. Safety cages available for low ceiling applications. Summer 2015 ** location with powder or clear coat only. Not recommended for salt water/ocean front applications. ** Location 1881 Industrial Drive Libertyville, IL 60048 Tele: 847.680.9043 Fax: 847.680.8140 www.matthewsfanco.com
shown in Gloss White with Walnut blades shown in Gloss White with Gloss White blades Eliza Geometry in Motion Designed in 2013 shown in with Gray Ash blades shown in with blades Designed by Chicago architect Stephen Katz in 2013, the Eliza blends a beautiful technically derived form with superior function and movement. The unique blade shape is designed to maximize air movement at the outer edge of the blade. The result is more efficient air velocity rings, less blade drag and greater motor optimization. Equally important is Elizaʼs stationary visual statement which combines modern utility with minimalist geometry. 56" diameter. Energy efficient, ultra-quiet, six-speed and reversible DC motor with new reliable technology. location finishes: brushed nickel and gloss white. Blades available in Gloss White,, Walnut or Gray Ash. Constructed of cast aluminum, polycarbonate and heavy stamped steel. Location: Limited Lifetime Warranty All Finishes** Standard equipment: One downrod of 10". 5", 20", 30", 48" or 72" downrods also available. Vaulted ceiling mount canopy for up to 30 degrees. Reverse on six-speed, hand-held and wall-mountable remote control.
MATT H EWS FAN COMPANY Eliza weight: 17 lbs voltage: 110* *Please contact us for possible 220 conversion 6" diameter 2" 5", 10", 20", 30", 48" or 72" downrods available 10" Blade Pitch 27 2" 56" SKU Naming Convention EK-XX-XX (Finish Blade Finish) Finishes Blade Finish - BN - BN Gloss White - WH Gloss White - WH Walnut - WN Gray Ash - GA CFM 5396 1) The Eliza is compatible with flat or vaulted ceilings and can be mounted with any one of the following downrod lengths: 5", 10", 20", 30", 48" and 72". 2) The Eliza is also compatible with a proprietary decora style accessory wall control: DC WC. ** location: All standard finshes. Not recommended for salt water/ocean front applications. 1881 Industrial Drive Libertyville, IL 60048 Tele: 847.680.9043 Fax: 847.680.8140 www.matthewsfanco.com Summer 2015
shown in Gloss White with Gray Ash blades shown in Gloss White with Gloss White blades Eliza H Geometry in Motion Designed in 2014 shown in with Walnut blades shown in with blades Designed by Chicago architect Stephen Katz in 2014, the Eliza H rodless style fan blends a beautiful technically derived form with superior function and movement. The unique blade shape is designed to maximize air movement at the outer edge of the blade. The result is more efficient air velocity rings, less blade drag and greater motor optimization. Equally important is Elizaʼs stationary visual statement which combines modern utility with minimalist geometry. 56" diameter. Energy efficient, ultra-quiet, six-speed and reversible DC motor with new reliable technology. location finishes: brushed nickel and gloss white. Blades available in Gloss White,, Walnut or Gray Ash. Constructed of cast aluminum, polycarbonate and heavy stamped steel. Limited Lifetime Warranty Reverse on six-speed, hand-held and wall-mountable remote control. Location: All Finishes**
MATT H EWS FAN COMPANY Eliza H weight: 14 lbs voltage: 110* *Please contact us for possible 220 conversion 8" diameter 9" 2"width Blade Pitch 27 56" SKU Naming Convention EKH-XX-XX (Finish Blade Finish) Finishes Blade Finishes - BN - BN Gloss White - WH Gloss White - WH Walnut - WN Gray Ash - GA CFM 5396 The Eliza H is compatible with a proprietary decora style accessory wall control: DC WC. ** location: All standard finishes. Not recommended for salt water / ocean front applications. Summer 2015 1881 Industrial Drive Libertyville, IL 60048 Tele: 847.680.9043 Fax: 847.680.8140 www.matthewsfanco.com
Location: All Finishes** 42" diameter version shown in Textured Bronze 52" diameter version shown in Chrome Irene-3 Designed in 2012 52" diameter version shown in Cutting a figure like no other, the Irene 3 is rustic, yet strikingly modern with three neatly joined, solid walnut-stained wooden blades. A spherical motor housing complements its minimal profile. Irene 3 is streamline while still appearing warm and natural. 52" or 42" diameter with three solid wood, walnut-stained machine-cut blades. Energy efficient, ultra-quiet, six-speed, reversible DC motor with new, reliable technology. location finishes: brushed nickel, polished chrome or textured bronze. Constructed of cast aluminum and heavy stamped steel. Limited Lifetime Warranty Standard equipment: One downrod of 10". 5", 20", 30", 48" or 72" downrods are also available. Vaulted ceiling mount canopy for up to 30 degrees. Reverse on six-speed, hand-held and wall-mountable remote control.
MATT H EWS FAN COMPANY Irene-3 weight: 17 lbs voltage: 110/220 6" diameter 2" 5", 10", 20", 30", 48" or 72" downrods available 7" 9" Blade Pitch 15 42" or 52" SKU Naming Convention IR3-XX (Model-Finish) Finish - BN Chrome - CR Textured Bronze - TB CFM 6355 1) The Irene 3 is compatible with flat or vaulted ceilings and can be mounted with any one of the following downrod lengths: 5", 10", 20", 30", 48" and 72". 2) The Irene 3 is also compatible with a proprietary decora style accessory wall control: DC WC. ** location: All standard finishes. Not recommended for salt water/ocean front applications. Summer 2015 1881 Industrial Drive Libertyville, IL 60048 Tele: 847.680.9043 Fax: 847.680.8140 www.matthewsfanco.com
42" diameter version shown in Textured Bronze 52" diameter version shown in Chrome Irene 3H Designed in 2013 52" diameter version shown in Cutting a figure like no other, the Irene 3H rodless-style fan, is rustic, yet strikingly modern with three neatly joined, solid walnut-stained wooden blades. A cylindrical motor housing complements its minimal profile. Irene 3H is streamline while still appearing warm and natural. Three solid wood, walnut-stained machine-cut blades in 42" or 52" diameters. Energy efficient, ultra-quiet, six-speed and reversible DC motor with new, reliable technology. location finishes: brushed nickel, polished chrome, textured bronze, matte black and gloss white. Reverse on hand-held, wall mountable six-speed remote control. Constructed of cast aluminum and heavy stamped steel. Limited Lifetime Warranty Location: All Finishes**
MATT H EWS FAN COMPANY Irene-3H weight: 11 lbs voltage: 110* *Please contact us for possible 220 conversion 7" diameter 7" 10" Blade Pitch 15 2" 42" or 52" SKU Naming Convention IR3H-XX-XX (Model-Finish-Diameter) Finishes Diameter Gloss White - WH 42" - 42 Matte Black - BK 52" - 52 - BN Chrome - CR Textured Bronze - TB CFM 42" Diameter - 4033 52" Diameter - 6140 The Irene 3H is compatible with a proprietary decora style accessory wall control: DC WC. ** location: All standard finishes. Not recommended for salt water / ocean front applications. Summer 2015 1881 Industrial Drive Libertyville, IL 60048 Tele: 847.680.9043 Fax: 847.680.8140 www.matthewsfanco.com
52" diameter version shown in Textured Bronze Location: All Finishes** 42" diameter version shown in Chrome Irene 5 Designed in 2012 52" diameter version shown in Cutting a figure like no other, Irene 5 is rustic, yet strikingly modern with five neatly joined, solid walnutstained wooden blades. A spherical motor housing complements its minimal profile. Irene 5 is streamline while still appearing warm and natural. 52" or 42" diameter with five solid wood, walnut-stained machine-cut blades. Energy efficient, ultra-quiet, six-speed, reversible DC motor with new, reliable technology. location finishes: brushed nickel, polished chrome or textured bronze. Constructed of cast aluminum and heavy stamped steel. Limited Lifetime Warranty Standard equipment: One downrod of 10". 5", 20", 30", 48" or 72" downrods are also available. Vaulted ceiling mount canopy for up to 30 degrees. Reverse on six-speed, hand-held and wall-mountable remote control.
MATT H EWS FAN COMPANY Irene-5 weight: 18 lbs voltage: 110/220 2" 6" diameter 5", 10", 20", 30", 48" or 72" downrods available SKU Naming Convention IR5-XX (Model-Finish) Finishes - BN Chrome - CR Textured Bronze - TB 6" 9" Blade Pitch 15 42" or 52" CFM 5612 1) The Irene 5 is compatible with flat or vaulted ceilings and can be mounted with any one of the following downrod lengths: 5", 10", 20", 30", 48" and 72". 2) The Irene 5 is also compatible with a proprietary decora style accessory wall control: DC WC. ** location: All standard finishes. Not recommended for salt water/ocean front applications. Summer 2015 1881 Industrial Drive Libertyville, IL 60048 Tele: 847.680.9043 Fax: 847.680.8140 www.matthewsfanco.com
42" diameter version shown in Textured Bronze 52" diameter version shown in Chrome Irene 5H Designed in 2013 52" diameter version shown in Cutting a figure like no other, Irene 5H rodless-style fan, is rustic, yet strikingly modern with five neatly joined, solid walnut-stained wooden blades. A cylindrical motor housing complements its minimal profile. Irene 5H is streamline while still appearing warm and natural. Five solid wood, walnut-stained machine-cut blades in 42" or 52" diameter. Energy efficient, ultra-quiet, six-speed and reversible DC motor with new, reliable technology. location finishes: brushed nickel, polished chrome, textured bronze, matte black and gloss white. Reverse on hand-held, wall mountable remote control. Constructed of cast aluminum and heavy stamped steel. Limited Lifetime Warranty Location: All Finishes**
MATT H EWS FAN COMPANY Irene-5H weight: 12 lbs voltage: 110* *Please contact us for possible 220 conversion 7" diameter 6" 10" Blade Pitch 15 2" 42" or 52" SKU Naming Convention IR5H-XX-XX (Model-Finish-Diameter) Finishes Gloss White - WH Diameter 42" - 42 Matte Black - BK 52" - 52 - BN Chrome - CR Textured Bronze - TB CFM 42" Diameter - 4692 52" Diameter - 6050 The Irene 5H is compatible with a proprietary decora style accessory wall control: DC WC. ** location: All standard finishes. Not recommended for salt water / ocean front applications. Summer 2015 1881 Industrial Drive Libertyville, IL 60048 Tele: 847.680.9043 Fax: 847.680.8140 www.matthewsfanco.com
Italo Ventania Designed in 2007 Safety cage compatible Suitable for ** Location shown in Red with metal blades and decorative cage U.S.A. Components and Labor Handmade shown in with wood blades The Italo Ventania is the largest rotational fan in the Matthews Fan Co collection. Its vortex sculpted arms grasp also remarkable, side-mounted fan heads in gentle, equatorial rotation. The fan heads can be infinitely positioned in 180-degree arcs for optimum air movement; the greater the angle of the motor to the horizontal support rods (up or down), the faster the axial rotation. A slow, controlled axial rotation is achieved by both fan head position and fan blade speed. Matthews rotational fans circulate heat and air conditioning more efficiently than traditional paddle fans. Constructed of cast aluminum, heavy spun and stamped steel, the Italo Ventania carries a limited lifetime warranty. Each unique motor mount and fan head knob is made of genuine marbleized Bakelite. The Italo Ventania is available with the following blade options: metal fan heads with decorative metal blade guards solid, ecologically harvested Brazilian mahogany fan heads without blade guards metal fan heads with metal safety cages for use in low ceiling applications (7 ft in US / 8.2 ft in Canada) Standard Finishes Black Bronze (Plate) Chrome Bronzette (Powdercoat) Copper Brass Copper Black Brass Chrome Blue Green White Dark Blue Dark Green Purple Orange Yellow Red Special Order Finishes
MATT HEWS FAN COMPANY www.matthewsfanco.com Italo Ventania weight: 24 lbs voltage: 110/220 7" diameter 5, 10", 20", 30", 48" or 72" downrods available (5.5 diameter ceiling canopy is used with the 5 downrod) MATTHEWS GERBAR D I S T I N C T L Y H A N D M A D E 16" 10" 13" 4" 62" mahogany fan head / 60" metal fan head Increasing Angles of Fan Heads to Support Poles Increases Speed of Axial Rotation Optimum Fan Head Position is 60 CFM: 4240 (Wood Fan Head) Blade Pitch 19 CFM: 3201 (Metal Fan Head) Blade Pitch 31 Standard Equipment: Lutron decora style SFS 5E fully variable wall switch in white 10" downrod. 5", 20", 30", 48" or 72" downrods available. Downrods can be easily field cut; they are not threaded. Flat ceiling canopy. Compatible with 29 vaulted ceiling canopy accessory. Metal fan heads with protective powder or clear coatings are suitable for Location. Safety cages available for low ceiling applications. Summer 2015 ** location with powder or clear coat only. Not recommended for salt water/ocean front applications. ** Location 1881 Industrial Drive Libertyville, IL 60048 Tele: 847.680.9043 Fax: 847.680.8140 www.matthewsfanco.com
Jarold DirecionalDesigned in 2007 Safety cage compatible Suitable for ** Location U.S.A. Components and Labor Handmade shown in Chrome with metal blades and decorative cage shown in Copper with wood blades Unique and versatile, the fan head of the Jarold Direcional ceiling fan can be infinitely positioned in a 180-degree arc, forward and reverse, to provide maximum, directional airflow. The Jarold can be hung in small, awkward spaces or in front of HVAC ducts to make more efficient the heating, ventilation or air conditioning of any space. Constructed of cast aluminum, heavy spun and stamped steel. Each unique motor mount and fan head knob is made of genuine marbleized Bakelite. Limited Lifetime Warranty The Jarold Direcional is available with the following blade options: metal fan head with decorative metal blade guards solid, ecologically harvested mahogany fan head without blade guards metal fan head with metal safety cages for use in low ceiling applications (7 ft in US / 8.2 ft in Canada) Standard Finishes Black Bronze (Plate) Chrome Bronzette (Powdercoat) Copper Brass Copper Black Brass Chrome Blue Green White Dark Blue Dark Green Purple Orange Yellow Red Special Order Finishes
MATT H EWS FAN COMPANY FAN COMPANY Jarold Direcional weight: 7 lbs voltage: 110/ 220 5.5" diameter MATTHEWS GERBAR D I S T I N C T L Y H A N D M A D E 5", 10", 20", or 30" downrods available 16" Wood Fan Head 13" Metal Fan Head CFM: 1600 (Metal Fan Head) Blade Pitch 31 Fan head is infinitely adjustable 180 in forward and reverse positions. CFM: 2120 (Wood Fan Head) Blade Pitch 19 Distance between top of yolk and bottom of blades is as follows: 15" for metal blades 16" for wood blades Standard Equipment: Lutron decora style SFS 5E fully variable wall switch in white 10" downrod. 5", 20" or 30" downrods available Flat ceiling canopy. Not compatible with vaulted ceiling canopy. Metal fan head with protective powder or clear coatings are suitable for Location. Safety cages available for low ceiling applications. ** Location Summer 2015 ** location with powder or clear coat only. Not recommended for salt water/ocean front applications. 1881 Industrial Drive Libertyville, IL 60048 Tele: 847.680.9043 Fax: 847.680.8140 www.matthewsfanco.com
Kaye Designed in 2012 shown as wall fan in Chrome shown as ceiling fan in Safety cage equipped shown as wall fan in Textured Bronze Location: All Finishes with Metal Blades.** Proudly Assembled With U.S. Labor The beautiful Kaye forward and reverse oscillating, 3 speed versatile-mount, wall or ceiling, fan, reminiscent of train cabin ventilators of yester-year, will cool down your favorite space with poise and determination. Kayeʼs profile is low, however its strength and character define it. Kaye can be mounted in small or awkward spaces or in front of HVAC ducts to make more efficient the heating, ventilation or air conditioning of your favorite space. Available in the following finishes: polished chrome, brushed nickel or textured bronze. Constructed of cast aluminum and heavy stamped steel. Limited Lifetime Warranty Equipped with hand-balanced metal blades and metal safety cages. 3 speed wall control and side-mounted wall junction box are included. A three wire system is needed to operate the oscillation mechanism independent of the fan blades.
MATT H EWS FAN COMPANY Kaye weight: 10.5 lbs voltage: 110/220 17.5" 5.5" diameter 29º from 0º 13" 4.5" 13" SKU Naming Convention KC-XX (Model-Finish) Finishes - BN Chrome - CR Textured Bronze - TB 90º Left to Right Oscillation Blade Pitch 31 CFM: 1328 Standard Equipment Includes: 3 speed decora style wall control Side mounted wall junction box *Remote control is possible. Please inquire for details. ** location: All standard finishes. Not recommended for salt water/ocean front applications. ** Location Summer 2015 1881 Industrial Drive Libertyville, IL 60048 Tele: 847.680.9043 Fax: 847.680.8140 www.matthewsfanco.com
Melody Designed in 2008 shown in with metal blades shown in Chrome with metal blades Safety cage equipped shown in Textured Bronze with metal blades Location: All Finishes with Metal Blades.** Proudly Assembled With U.S. Labor The Melody oscillating, 3 speed wall-mounted fan, designed in the Art Nouveau style with a grand, arching gooseneck, provides maximum multi-directional airflow. Melody can be mounted in small, awkward spaces or in front of HVAC ducts to make more efficient the heating, ventilation or air conditioning of any space. Available in the following finishes: polished chrome, brushed nickel or textured bronze. Constructed of cast aluminum and heavy stamped steel. Limited Lifetime Warranty Equipped with hand-balanced metal blades and metal safety cages. 3 speed wall control and side-mounted wall junction box are included. A three wire system is needed to operate the oscillation mechanism independent of the fan blades.
MATT H EWS FAN COMPANY 30º from 0º 13" 2.5" CFM: 1328 20" 5.5" The motor angle and projection can be customized by a simple alteration to the field-cuttable gooseneck. Melody weight: 14 lbs voltage: 110/220 90 left to right oscillation Blade Pitch 31 SKU Naming Convention ME-XX (Model-Finish) Finishes - BN Chrome - CR Textured Bronze - TB 20" Standard Equipment Includes: 3 speed decora style wall control Side mounted wall junction box *Remote control is possible. Please inquire for details. ** location: All standard finishes. Not recommended for salt water/ocean front applications. ** Location 1881 Industrial Drive Libertyville, IL 60048 Tele: 847.680.9043 Fax: 847.680.8140 www.matthewsfanco.com Summer 2015
Michelle Parede Designed in 2002 Safety cage equipped Suitable for ** Location U.S.A. Components and Labor Handmade shown in Black with metal blades and safety cage shown in Copper with metal blades and safety cage The Michelle Parede is reminiscent of wall fans of the early 20th century. The fan head of the Michelle Parede wall mounted fan can be infinitely positioned vertically and horizontally across 180 - degree arcs to provide maximum directional airflow. It can be mounted in small, awkward spaces or in front of HVAC ducts to make more efficient the heating, ventilation or air conditioning of any space. Constructed of cast aluminum, heavy spun and stamped steel, the Michelle carries a limited lifetime warranty. Equipped with hand-balanced metal fan head with metal safety cages. location rated if ordered with protective powder or clear coatings. Michelle Parede does not oscillate. Standard Finishes Black Bronze (Plate) Chrome Bronzette (Powdercoat) Copper Brass Copper Black Brass Chrome Blue Green White Dark Blue Dark Green Purple Orange Yellow Red
MATT H EWS FAN COMPANY Michelle Parede weight: 8 lbs voltage: 110/220 16" MATTHEWS GERBAR D I S T I N C T L Y H A N D M A D E 13" Infinitely Adjustable 180 Vertically and Horizontally 20" CFM: 1600 Blade Pitch 31 optimum fan head position: 45 to yoke 5.5" diameter Standard Equipment: Safety cage Lutron decora style SFS 5E fully variable wall switch in white Side-mounted wall junction box Summer 2015 ** Location ** location with powder or clear coat only. Not recommended for salt water/ocean front applications. 1881 Industrial Drive Libertyville, IL 60048 Tele: 847.680.9043 Fax: 847.680.8140 www.matthewsfanco.com
Vent-Bettina Designed in 2002 shown in with wood blades Safety cages Safety available cage for compatible low ceilings. Suitable for Suitable for ** Location Location Compatible U.S.A. with Components Downrod and Canopy Labor Handmade U.S.A. Components and Labor shown in Chrome with metal blades and safety cage The Vent-Bettina rotational fan is thoughtfully designed with its arms gently upward curving. The fan offers fluid lines and quiet axial rotation. The fan heads can be infinitely positioned in 180-degree arcs for optimum air movement; the greater the angles of the motors to the horizontal support rods (up or down), the faster the axial rotation. A slow, controlled axial rotation is achieved by both fan head position and fan blade speed. Matthews rotational fans circulate heat and air conditioning more efficiently than traditional paddle fans. Constructed of cast aluminum, heavy spun and stamped steel, the Bettina carries a limited lifetime warranty. Each unique motor mount and fan head knob is made of genuine marbleized Bakelite. The Bettina is available with the following blade options: metal fan heads with decorative metal blade guards solid, ecologically harvested Brazilian mahogany fan heads without blade guards metal fan heads with metal safety cages for use in low ceiling applications (7 ft in US / 8.2 ft in Canada) Standard Finishes Black Bronze (Plate) Chrome Bronzette (Powdercoat) Copper Brass Copper Black Brass Chrome Blue Green White Dark Blue Dark Green Purple Orange Yellow Red Special Order Finishes