EUROPÄISCHE SCHORNSTEINFEGERMEISTER-FÖDERATION FÉDÉRATION EUROPÉENNE DES MAÎTRES RAMONEURS EUROPEAN FEDERATION OF CHIMNEY-SWEEPS European standardisation activities of ESCHFOE CEN/SFG_U Sector Forum Gas Utilisation WG 1 Sector Forum Gas Utilisation heating appliance classification WG 2 Sector Forum Gas Utilisation environmental aspects WG 3 Sector Forum Gas Utilisation heating appliance labelling WG 4 Sector Forum Gas Utilisation chimneys/cpr CEN/TC 46 Fluid oil stoves with vaporising burners CEN/TC 47 Vaporising oil burners and their components function, safety and tests CEN/TC 48 Domestic gas-fired water heaters CEN/TC 57 Heating boilers CEN/TC 62 Independent gas-fired space heaters CEN/TC 89 Thermal performance of buildings CEN/TC 106 Large kitchen appliances using gaseous fuels CEN/TC 109 Central heating boilers using gaseous fuels CEN/TC 131 Gas burners using fans CEN/TC 156 Ventilation for buildings CEN/TC 166 Chimneys WG 1 Chimneys - General requirements WG 2 Thermal and fluid dynamic calculation methods for chimneys WG 3 Clay/ceramic chimneys WG 4 Chimneys and their components with inner linings of plastic WG 5 Chimneys and their components with inner linings of concrete SC 2 Chimneys and their components with inner linings of metal CEN/TC 180 Decentralized gas heating CEN/TC 181 Dedicated liquefied petroleum gas appliances CEN/TC 216 Measurement and alarm apparatus for dangerous gases CEN/TC 228 Heating systems in building CEN/TC 264 air-pollution control (industry) CEN/TC 295 Residential independent boilers fired by solid fuel CEN/TC 297 Free-standing chimneys updated: 2017-07-31 Seelbach Seelbach Seelbach Dr. Stehmeier Erlhof (informative) Verderber Erlhof (informative) Seelbach (informative) Gerath Dr. Stehmeier, Verderber (Dovrtel, Seidl) Verderber (Dovrtel, Seidl)/ Dr. Stehmeier (Convenor) Dr. Stehmeier, (Dovrtel) Verderber (Convenor) Seelbach (informative) Seelbach (informative) Seelbach (informative) Dr. Stehmeier (informative) (Verderber informative) Schlichter (informative) Michael Verderber (Vice President of ESCHFOE and of the Austrian Bundesinnung der Rauchfangkehrer) Dr. Dieter Stehmeier (Technical and Scientific Consultant of ESCHFOE and former Technical Director of ZIV) Michael Erlhof (Technical Director of the German Bundesverband des Schornsteinfegerhandwerks ZIV) Jörg Seelbach (Technical Consultant of ZIV) Simon Dovrtel (Obrtno-podjetniska zbornica Slovenije - Sekcija dimnikarjev) Libor Seidl (Spolecenstvo Kominiku Ceske Republiky) Uwe Gerath (former Member of the Technical Committee of ZIV) Markus Schlichter (Member of the Technical Committee of ZIV)
EUROPÄISCHE SCHORNSTEINFEGERMEISTER-FÖDERATION FÉDÉRATION EUROPÉENNE DES MAÎTRES RAMONEURS EUROPEAN FEDERATION OF CHIMNEY-SWEEPS Activities of ESCHFOE at European Standardisation 2016/17 ESCHFOE is represented by the vice president of ESCHFOE, Vice President of the Austrian chimney sweeps and technical director Michael Verderber, the technical and scientific consultant (TWB) of ESCHFOE and former technical director of the Federal Association of Master Chimney Sweeps (ZIV) Dr.-Ing. Dieter Stehmeier (TWB), the technical director of ZIV Dipl.-Ing. Michael Erlhof (VT), the technical consultant (TB) of ZIV chimney sweep master Dipl.-Ing. Jörg Seelbach, the former Member of the Technical Committee (MdTA) of the ZIV chimney sweep master Uwe Gerath and the Member of the Technical Committee (MdTA) of the ZIV chimney sweep master Markus Schlichter. 1. CEN/SFGas_U (Sector Forum Gas Utilisation) SFGas_U is an amalgamation of all CEN/TCs of the sector gas utilisation including TCs that deal with gasfired heating appliances ESCHFOE is member at CEN/SFGas_U as well as of several working groups (WG) represented by TB Seelbach and TWB Stehmeier (WG 4). Working groups: CEN/SFGas_U/WG 1 Heating appliance classification. CEN/SFGas_U/WG 2 Environmental aspects. CEN/SFGas_U/WG 3 Heating appliance labeling. CEN/SFGas_U/WG 4 Chimneys/CPR. Note: Gas Appliance Directive (GAD: 2009/142/EG) has been replaced at 2016-03-09 by Gas Appliance Regulation (GAR: EU 2016/426) which (essentially) becomes effective at 2018-04-18. CEN/TR 1472 General guidance for the labeling of gas appliances : Nothing new. CEN/TR 1749 European guideline for the classification of gas fired heating appliances depending of the type of flue gas exhaust (formally CR 1749). Status: Actual 6 th version (5 th revision) published 2014: Content related: 5 new gas appliance types C (10) to C (15) for chimneys serving more than one heating appliance Enables both system certification according to Gas Appliance Regulation as well as gas appliances with chimneys according Construction Building Regulation. Future: Regulations through a CEN/Sector Forum is no longer permitted Regulation shall be dealt in CEN/TC 238 Test gases, test pressures and categories of appliances and the TR converted in an EN standard. CEN/TR 16940 Safety of domestic gas installations Recommendations : Status: New draft from December 2016. Content related: Essential contents supposed to be basic guidelines / recommendations to describe a high level of quality and safety in setup / installation, commissioning and maintenance of gas appliances and pipework. Future: Regulations through a CEN/Sector Forum is no longer permitted Proceedings shall be dealt with in future over CEN/TC 234 "Gas infrastructure". Planned projects: Guideline for consideration of environmental aspects concerning standardisation of gas-fired heating appliances Environmental check list standardisation of gas-fired heating appliances.
Page 2 of report about Activities of ESCHFOE at the European Standardisation 2016/17 2. CEN/TC 46 Fireplaces for liquid fuels ZIV is member of the German mirror committee represented by VT Erlhof EN 1 Flued oil stoves with vaporizing burners (2007). EN 16647 Fireplaces for liquid fuels Decorative appliances producing a flame using alcohol based or gelatinous fuel Use in private households (2016). pren 1rev Flued oil stoves with vaporizing burners (2013) Nothing new. 3. CEN/TC 48 Domestic gas-fired water heaters ZIV is member of the German mirror committee represented by TB Seelbach EN 26 Gas-fired instantaneous water heaters for sanitary uses production, fitted with atmospheric burners (2015) and EN 89 Gas-fired storage water heaters for the production of domestic hot water : Adaptation to EN 15502-1 Gas fired central heating boilers Part 1: General requirements and tests (2015). EN 26/pr A1 and EN 89/pr A1: Drafts of amendments A1 respectively published in December (?) 2016. 4. CEN/TC 57 Heating boilers ESCHFOE is associated member of CEN/TC 57 represented by Vice President Verderber and VT Erlhof (informative) EN 303-x Heating boilers Part 1: Heating boilers with forced draught burners. Terminology, general requirements, testing and marking (2003), Part 2: Heating boilers with forced draught burners. Special requirements for boilers with atomizing oil burners (2003), Part 3: Gas-fired central heating boilers. Assembly comprising a boiler body and a forced draught burner (2006), Part 4: Heating boilers with forced draught burners. Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with outputs up to 70 kw and a maximum operating pressure of 3 bar. Terminology, special requirements, testing and marking (1999), Part 5: Heating boilers for solid fuels, hand and automatically stocked, nominal heat output of up to 500 kw Terminology, requirements, testing and marking (2012). Part 6: Heating boilers with forced draught burners. Specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kw (2000), Part 7: Heating boilers - Gas-fired central heating boilers equipped with a forced draught burner of nominal heat output not exceeding 1000 kw (2007). EN 14394 Heating boilers Heating boilers with forced draught burners Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 C (2008) EN 15034 Heating boilers - Condensing heating boilers for fuel oil (2006) EN 15035 Heating boilers - Special requirements for oil fired room sealed units up to 70 kw (including LAS) (2006) EN 15270 Pellet burners for small heating boilers - Definitions, requirements, testing, marking (2007) EN 303-1, EN 303-2 and EN 304:
Page 3 of report about Activities of ESCHFOE at the European Standardisation 2016/17 New draft standards from July 2016 among others because of the Ecodesign Directive. EN 303-5: Revision started. EN 303-6 und EN 15332: Revision because the Ecodesign Directive. 5. CEN/TC 62 Independent gas-fired space heaters ZIV is member of the German mirror committee represented by TB Seelbach Published standards: EN 509 Decorative fuel-effect gas appliances (A2: 2005). EN 613 Independent gas-fired convection heaters (A1: 2003). EN 1266 Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases (2002). EN 13278 Open fronted gas-fired independent space heaters (2003). EN 14438 Gas-fired insets for heating more than one room (2007. EN 14829 Gas-fired room heaters without chimney and a nominal heat output below 6 kw (2007). EN 509rev and EN 613rev: Nothing new. 6. CEN/TC 109 Central heating boilers using gaseous fuels ESCHFOE is associated member at CEN/TC 109 since 2001 represented by TB Seelbach (informative) EN 13203-1 Gas-fired domestic appliances producing hot water - Appliances not exceeding 70 kw heat input and 300 l water storage capacity - Part 1: Assessment of performance of hot water deliveries (2015). EN 13203-2 Gas-fired domestic appliances producing hot water - Part 2: Assessment of energy consumption (2015). EN 12309-2 Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kw Part 2: Rational use of energy (2013). EN 13203-3 Solar supported gas-fired domestic appliances producing hot water Appliances not exceeding 70 kw heat input and 500 litres water storage capacity Part 3: Assessment of energy consumption (2010). EN 15420 Gas-fired central heating boilers - Type C boilers of nominal heat input exceeding 70 kw, but not exceeding 1000 kw (2011). EN 15502-1 Gas fired central heating boilers Part 1: General requirements and tests : (2012). EN 15502-2-1 Gas fired central heating boilers Part 2-1: Gas appliances type C and gas appliances type B 2, B 3 and B 5 appliances of a nominal heat input not exceeding 1000 kw (2013) EN 15502-2-2 Gas fired central heating boilers Part 2-1: Gas appliances type B1 of a nominal heat input not exceeding 70 kw (2014). EN 13203-4 Gas fired domestic appliances producing hot water - Part 4: Assessment of energy consumption of gas fired appliances combined heat and power (micro CHP) producing hot water and electricity not exceeding 70 kw heat input, not exceeding 50 kwe electrical output and 500 l water storage capacity draft standard. EN 13203-5 Gas-fired domestic appliance producing hot water - Part 5: Assessment of energy consumption of gas fired appliances combined with electrical heat pump draft standard. EN 13203-6 Gas-fired domestic appliance producing hot water - Part 6 : Assessment of energy consumption of gas-fired sorption heat pumps draft standard. EN 15502-1/A draft standard.
Page 4 of report about Activities of ESCHFOE at the European Standardisation 2016/17 EN 15502-2-1/A1: Published in December (?) 2016. DIN EN 303-3 Heating boilers - Part 3: Gas-fired central heating boilers - Assembly comprising a boiler body and a forced draught burner Revision of the standard adopted. DIN EN 303-7 Heating boilers - Part 7: Gas-fired central heating boilers equipped with a forced draught burner of nominal heat output not exceeding 1 000 kw Revision of the standard adopted. 7. CEN/TC 156/WG 2 Natural and mechanical powered residential ventilation ZIV is member of the German mirror committee represented by MdTA Gerath EN 12599 Ventilation for buildings Test procedures and measurement methods to hand over air conditioning and ventilation systems (2012). EN 15251rev Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics (2007). EN 16211 Ventilation for buildings Measurement of air flows on site Methods (2015). EN 16798-1 Energy performance of buildings Part 1: Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics Module M1-6 ( replacement for EN 15251). 8. CEN/TC 156/WG 14 Ventilation of commercial kitchens ZIV is member of the German mirror committee represented by MdTA Gerath EN 16282-x Equipment for commercial kitchens Components for ventilation of commercial kitchens Part 1: General requirements including calculation method, Part 2: Kitchen ventilation hoods Design and safety requirements, Part 3: Kitchen ventilation ceilings, Part 4: Outlets, Part 5: Air duct, Part 6: Aerosol separators, Part 7: Installation and use of fixed fire suppression systems. Nothing new. 9. CEN/TC 166 Chimneys ESCHFOE is associated member at CEN/TC 166 since 1991 represented by Vice president Verderber (WG 1, WG 2), TWB Stehmeier (TC, SC 2, WG 1, WG 2), TB Seelbach (WG 3, WG 4, WG 5 informative) see annex EN 1443 Chimneys General requirements : Content related: Standard new structured according to the CEN model standard for product standards harmonized to EU-Construction Product Regulation (EU-CPR). Expansion of the chimney designation with one letter ("a" to "l"), which stands for the kind of construction of the adjacent combustible walls and ceilings, that means their insulation und kind of penetration Coverage of the main usual installation situations in Europe Proposal of TWB Stehmeier on a corresponding table in form suitable for users (Instead of "insulation thickness = xxx mm" U value 0,yy W/m². K or R value 0,zz m². K/W ). Status: Public Enquiry (PE) finished. EN 13216-1 Chimneys - Test methods for system chimneys - Part 1: General test methods : Editing a revision in CEN / TC 166 / WG 1 TG 5: Content related: See Report for 2014/15.
Page 5 of report about Activities of ESCHFOE at the European Standardisation 2016/17 New Table with actually 12 test rig variations with regard to the insulation and kind of penetration of adjacent combustible walls and ceilings, which should cover the major installation situations in Europe. See EN 1443. Proposed amendment: Scope expand to all chimney products New text: "This document specifies material-independent general test methods for all system chimneys. It can also be used for all flue gas carrying products. Status: Public Enquiry finished At present comment discussion. Decision: Final publication of EN 1443 und EN 13216-1 as package EN 13384-1 Chimneys Thermal and fluid dynamic calculation methods Part 1: Chimneys serving one appliance : Mistake: In table B.8 No 8 column " Geometric dimensions" it shall be read A 2 /A 1 instead of "A 1 /A 2 " Amendment A1 required. Calculation formula for combustion air mass flow: Previously the ratio of the combustion air mass flow to the flue gas mass flow is constantly assumed with ß = 0,9. Really the combustion air mass flow is depending on the excess air and for condensing boilers if necessary on the amount of condensate. According to German Specialist rules for stove and air heating construction (TR OL) the combustion air mass flow is sometimes greater than the flue gas mass flow ß > 1 what cannot be. TWB Stehmeier has created a formula with the dependencies In Amendment A1 shall a corresponding addition be provided. EN 13384-2 Chimneys Thermal and fluid dynamic calculation methods Part 2: Chimneys with more than one heating appliance : Mistake: In the English and German version in clause 5.1 under "The validation of the mass flow requirement and pressure requirement shall be done at following working conditions, using the external and ambient air temperatures specified in EN 13384-1" the first sentence after the indent must be represented also as an indent. Amendment A1 required. Comparison with EN 15502-2-1:2012/prA1 Gas fired central heating boilers Part 2-1: Gas appliances type C and gas appliances type B 2, B 3 and B 5 appliances of a nominal heat input not exceeding 1000 kw": Background: The conditions e. g. of gas appliances type C (10) and C (11) are partial different different results different flue sizes. In Amendment A1 insert a new table B.3: "Flue gas characteristics of gas appliances type C (10)". EN 15287-1 and -2 Chimneys Design, installation and commissioning of chimneys Y : Changes mentioned under EN 1443 would have to be inserted if necessary. Processing in CEN/TC 166/WG 1/TG 4 started. N 16475-x Chimneys Accessories : Processing in CEN/TC 166/WG 1/TG 1 to 4. Part 1: Dampers Requirements and test methods: Public Enquiry finished At present comment discussion. Part 2: Exhaust fans Requirements and test methods : in March 2017 CE marking after publication in Official Journal of the EU. Part 3: Draught regulators, standstill opening devices and combined secondary air devices Requirements and test methods : in April 2016 Initiation of Amendment A1 because of error correction. Part 4: Flue dampers Requirements and test methods : Processing in CEN/TC 166/WG 1/TG 4 finished. Initiation of Public Enquiry. Part 5: Explosion/implosion relief devices Requirements and test methods : Survey in TC about national rules and applications Answer of the majority that no necessity
Page 6 of report about Activities of ESCHFOE at the European Standardisation 2016/17 Deletion of the preliminary work item. Part 6: Access components Requirements and test methods : Formal vote finished In German version Reinigungsverschlüsse replaced by Zugangsbauteile. Part 7: Rain caps Requirements and test methods : in January 2016 CE marking after publication in Official Journal of the EU. Part 8: Particle filters : Particle filters are new products for which no European methods of testing are available currently yet Deletion of the preliminary work item. Soot fire resistance/soot fire safety See Report for 2014/15 According to the CEN Consultant EU Commission has agreed to the TC 166 proposal. EN 1366-13 Fire resistance tests for service installations Part 13: Chimneys : Content related: Method for the determination of fire resistance duration (against fire spreading from external to external) for chimneys, shafts of chimneys or penetration elements as part of a chimney. Status: Public Enquiry in CEN/TC 127/WG 2/TG 9 Fire safety chimneys finished. Further procedure: For designation (e. g. EI) is amendment of EN 13501-2 Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services necessary Standing Committee on Construction (SCC) for EU Construction Product Regulation (CPR). Other business: EU Construction Products Regulation (CPR) instead of Construction Products Directive (CPD): Backgrounds: Directive must respectively be implemented in a national right, Regulation is valid directly in all Member States. Since 1 th of July 2013 mandatory. Consequences: Declaration of Performance (DoP) of the manufacturers instead of Declaration of Conformity (DoC) Annex ZA of product standards have to be adapted. Mandate M/105 (Chimneys, flues and specific products): Preparation of a comparison of the basic requirements on construction works in accordance with Annex I of the CPR, of the last state of the mandate (M/105 with change M/442) and of the performance characteristics of EN 1443 Basis for processing EN 1443 and answer to mandate. Answer to the Mandate M/105: Incorporation of a proposal on new soot fire class As. Incorporation of a proposal on new pressure class M. 10. CEN/TC 180 Decentralized gas heating ZIV is member of the German mirror committee represented by TB Seelbach Currently, all the standards of the CEN/TC 180 due to new or changed requirements (GAR, ERP, EPBD, CPR) should be overhauled. The existing standards are to be combined in some cases. EN 416-x Single burner gas-fired overhead radiant tube heaters for non-domestic use 1: Part 1: Safety (2009), 2: Part 2: Rational use of energy (2006). EN 419-x Non-domestic gas-fired overhead luminous radiant heaters. 1: Part 1: Safety (2009), 2: Part 2: Rational use of energy (2006). EN 621 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kw, without a fan to assist transportation of combustion air and/or combustion products (2009). EN 777-1 to -4 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part x Safety with x = 1 to 4, Y = D, E, F, H (2009).
Page 7 of report about Activities of ESCHFOE at the European Standardisation 2016/17 EN 778 Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kw, without a fan to assist transportation of combustion air and/or combustion products (2009) EN 1020 Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kw incorporating a fan to assist transportation of combustion air or combustion products (2009). EN 1319 Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kw (2009), among others air heaters. EN 1596 Specification for dedicated liquefied petroleum gas appliances Mobile and portable nondomestic forced convection direct fired air heaters (2004). Request for a new standard about Micro-Heating-Power-Appliance. 11. CENELEC/TC 216 Measurement and alarm apparatus for dangerous gases EN 50379-x Specification or portable electrical apparatus designed to measure combustion flue gas parameters of heating appliances Part 1: General requirements and test methods (2004) Part 2 Performance requirements for apparatus used in statutory inspections and assessments (2004) Part 3 Performance requirements for apparatus used in non-statutory servicing of gas-fired heating appliances (2004) 12. CEN/TC 228 Heating systems in buildings Inspection of boilers and heating systems ESCHFOE was represented about Germany in TG for inspection standard represented by TWB Stehmeier and VT Erlhof Published Standard: EN 15378-x Energy performance of buildings - Heating systems and DHW in buildings Part 1: Inspection of boilers, heating systems and DHW, Module M3-11, M8-11 (2017), Part 3: Measured energy performance, Module M3-10, M8-10 (2017): Delay in the procedure for Formal Vote.. CEN/TR 15378-x Energy performance of buildings - Heating systems and DHW in buildings (TR = Technical Report): Part 2: Explanation and justification of EN 15378-1, Module M3-11 and M8-11 (2017), Part 4: Explanation and justification of EN 15378-3, Module M3-10, M8-10 (2017). 13. CEN/TC 295 Residential solid fuel burning appliances ESCHFOE is associated member at CEN/TC 295 represented by MdTA Markus Schlichter in the German mirror committee Published harmonised standards: EN 12809 Residential independent boilers fired by solid fuel Nominal heat output up to 50 kw - Requirements and test methods (2004 + correction 2007). EN 12815 Residential cookers fired by solid fuels definitions, requirements, instruction, labelling and test methods (2004 + correction 2007). EN 13229 Inset appliances including open fires fired by solid fuels Requirements and test methods (2004 + correction 2007) EN 13240 Roomheaters fired by Solid Fuels Requirements and test methods (2004 + correction 2007). EN 14785 Residential space heating appliances fired by wood pellets Requirements and test methods (2006). EN 15250 Slow heat release appliances fired by solid fuel Requirements and test methods (industrially manufactured) (2007 + correction 2015). EN 15821 Multi-firing sauna stoves fired by natural wood logs Requirements and test methods (2010). Published other standards: EN 15544 One off Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves stoves) Dimensioning (2009): Calculation method. EN 16510-x Residential solid fuel burning appliances Part 1: General requirements and test methods, Part 2-1: Roomheaters,
Page 8 of report about Activities of ESCHFOE at the European Standardisation 2016/17 Part 2-2: Inset appliances including open fires, Part 2-3: Cookers, Part 2-4: Independent boilers Nominal heat output up to 50 kw, Content related: Part 1 planned as a new "mother standard". Names are not announced (e. g. distance out to combustible materials), but provided in symbols (d min ) Type plates can be used without translations into the national languages. Dust content also becomes indicate on appliance plate besides CO content and efficiency. Status: Standard series will be published but in the EU Official Journal probably not published because of a Finnish objection At first not harmonized No CE marking. For the Notified body means this, that requirements are available for the measuring by the test laboratories according to an existing standards (e. g. EN 13240 remains), the procedure and the test report is described in the EN 16510. Decision of CEN/TC 295: At first the previous standards EN 12809, EN 12815, EN 13229, EN 13240 and EN 15250 are not withdrawn. Standard series EN 16510 shall be nationally publish. Through this status of a technical rule, so that the requirements can be used at the measuring on the residential solid fuel burning appliances (at the test rig). EN 16510-2-x Residential solid fuel burning appliances Part 2-5: Slow heat release appliances : Absorbers shall be held out of the standard for time reasons (installation problems, safety status etc.) If necessary possibility to consider sauna stoves in the standard. Part 2-6: Appliances fired by wood pellets : Formal vote (FV) finished. Part 2-7: Combination units log wood/pellets : In planning Processing in WG 6. 14. CEN/TC 335 Solid biofuels : EN 14961-x Solid biofuels Fuel specifications and classes Part 1: General requirements Part 2: Wood pellets for non-industrial use, Part 3: Wood briquettes for non-industrial use, Part 4: Wood chips for non-industrial use, Part 5: Firewood for non-industrial use Part 6: Non-wood pellets for non-industrial use. EN 15234-1 Solid biofuels Fuel quality assurance Part 1: General requirements. Sankt Augustin, 2017-07-31 Dr. Stehmeier Technical and scientific consultant
State of standardization of CEN/TC 166 Chimneys with work items (July 2017) Abbreviations: WG = Working Group WI = Work Item CEN = Comité Européen de Normalisation SC = Subcommitee PE = Public Enquiry (about a draft) European Standardisation Institut EN = Norme Européenne/European standard FV = Formal Vote (about the final standard) TC = Technical Committee TS = Technical Specification UAP = short procedure (without draft) Reg.-Nr. 10.11.3/2017-07-31/TWB WI No. / Working Group 00166100 / WG 1 00166105/ WG 1 Standard No. EN 1443 Rev. 13216-1 Rev. 14297 15287-1 +A1 Rev. 15287-2 CEN/TS 16134 Chimneys General requirements Chimneys Test methods for system chimneys Part 1: General test methods Chimneys Freeze-thaw resistance test method for chimney products Title Status Mandate Short explanation Chimneys Design, installation and commissioning of chimneys Part 1: Chimneys for non-roomsealed heating appliances Chimneys Design, installation and commissioning of chimneys Part 2: Chimneys systems for roomsealed heating applications Chimneys Terminals General requirements and material independent test methods PE finished comment discussion no no preliminary WI General test standard fundamental revision Date for publishing no August 2004 started no no European Execution standard adaptation to EN 1443 European Execution standard Beginning of application as harmonized standard Deadline for withdrawing national standards: March 2003 August 2004 Sept. 2004 March 2005 August 2010 March 2008 TS published no Technical Specification Sept. 2011 00166076 / WG 1 16475-1 Chimneys Accessories Part 1: Silencers comment discussion planned 16475-2 Chimneys Accessories Part 2: Exhaust fans planned March 2017 2018-12-31 00166112 / WG 1 16475-3 A1 Chimneys Accessories Part 3: Draught regulators, standstill opening devices and combined secondary air devices Amendment initiated planned error correction April 2016 2018-01-31 00166079 / WG 1 16475-4 Chimneys Accessories Part 4: Flue dampers processing finished planned preliminary WI 00166080 / WG 1 16475-5 Chimneys Accessories Part 5: Explosion/implosion relief devices plan deleted according to inquiry no need 00166081 / WG 1 16475-6 Chimneys Accessories Part 6: Access components FV finished planned 16475-7 Chimneys Accessories Part 7: Rain caps planned January 2016 2017-10-31 16475-8 Chimneys Accessories Part 8: Particle filters plan deleted missing experience Page 1 von 3
WI No. / Working Group Standard No. EN 13384-1 A1 Chimneys Thermal and fluid dynamic calculation methods Part 1: Chimneys serving one appliance Title Status Mandate Short explanation Amendment initiated no error correction Date for publishing April 2015 Beginning of application as harmonized standard Deadline for withdrawing national standards: 13384-2 A1 Chimneys Thermal and fluid dynamic calculation methods Part 2: Chimneys with more than one heating appliance Amendment initiated no error correction + update default data April 2015 13384-3 Chimneys Thermal and fluid dynamic calculation methods Part 3: Methods for the development of diagrams and tables for chimneys serving one heating appliance no October 2005 1457 Chimneys Clay/ceramic flue liners Requirements and test methods + A1 + AC Standard withdrawn replaced by EN 1457-1 and -2 August 2007 2008-01-01 2008-01-01 00166109/ WG 3 1457-1 Chimneys Clay/ceramic flue liners Part 1: Flue liners operating under dry conditions Requirements and test methods comment discussion adaptation to CPR Febr. 2012 2012-11-01 2013-11-01 00166110 / WG 3 1457-2 Chimneys Clay/ceramic flue liners Part 2: Flue liners operating under wet conditions Requirements and test methods comment discussion adaptation to CPR Febr. 2012 2012-11-01 2013-11-01 1806 Chimneys Clay/ceramic flue blocks for single wall chimneys Requirements and test methods July 2006 2007-05-01 2008-10-01 0166xxx / WG 3 13063-1 +A1 Chimneys System chimneys with clay/ceramic flue liners Part 1: Requirements and test methods for sootfire resistance planed October 2007 2008-05-01 2009-04-30 0166xxx / WG 3 13063-2 +A1 Chimneys System chimneys with clay/ceramic flue liners Part 2: Requirements and test methods under wet conditions planed October 2007 2008-05-01 2009-05-01 00166xxx / WG 3 13063-3 Chimneys System chimneys with clay/ceramic flue liners Part 3: Requirements and test methods for air flue system chimneys planed July 2007 2008-05-01 2007-05-01 13063-4 Chimneys System chimneys with clay/ceramic flue liners Part 4: Requirements and test methods for combinations deferred? 13069 Chimneys Clay/ceramic outer walls Requirements and test methods July 2005 2006-05-01 2007-05-01 13502 Chimneys Requirements and test methods for clay/ ceramic flue terminals October 2002 2003-08-01 2004-08-01 Page 2 of 3
WI No. / Working Group Standard No. EN 14241-1 14471 +A1 Title Status Mandate Short explanation Chimneys Elastomeric seals and elastomeric sealants Material requirements and test methods Part 1: Seals in flue liners Chimneys System chimneys with plastic flue liners Requirements and test methods Support standard Date for publishing Beginning of application as harmonized standard Deadline for withdrawing national standards: August 2013 2014-02-28 January 2015 2015-07-10 2016-07-10 1857 Chimneys Components concrete flue liners April 2010 2011-01-01 2012-01-01 00166104 / WG 5 1858 +A1 12446 16497-1 00166099/ WG 5 16497-2 Chimneys Components concrete flue blocks interrupted adaptation to CPR June 2011 2012-04-01 2013-04-01 Chimneys Components Concrete outer wall elements June 2011 2012-04-01 2013-04-01 Chimneys Concrete System Chimneys Part 1: Non-balanced flue applications Chimneys Concrete System Chimneys Part 2: Balanced flue applications Febr. 2015 2016-11-30 March 2017 2018-12-31 00166107 / SC 2 00166111 / SC 2 1856-1 1856-2 1859 +A1 12391-1 14989-1 14989-2 Chimneys Requirements for metal chimneys Part 1 System chimney products Chimneys Requirements for metal chimneys Part 2: metal liners and connecting flue pipes in processing in processing Chimneys Metal chimneys Test methods no April 2013 Chimneys Execution standard for metal chimneys Part 1: Chimneys for non-roomsealed heating appliances Chimneys and air supply duct systems for roomsealed appliances Requirements and test methods Part 1: Vertical terminals for C 6-type appliances Chimneys and air supply duct systems for room sealed appliances Requirements and test methods Part 2: Flue and air supply ducts for individual room sealed appliances Standard withdrawn no replaced by EN 15287-1 June 2009 2010-03-01 2011-03-01 June 2009 2010-03-01 2011-03-01 Dec. 2003 March 2005 Febr. 2007 2008-01-01 2009-01-01 Dec. 2007 2009-01-01 2010-01-01 Page 3 of 3