Ceiling Speaker VXC/VXCW Features A versatile line-up for clear consistent sound. Series offers three different woofer sizes in either black or white. Features newly customized transducers for superb music reproduction as well as crystal clear announcements. Designed with optimized bass-reflex tuning to offer a firm, tight low-end. Equipped with internal transformers that allow both high and low impedance drive, which can be selected by simply switching the tap on the baffle. Anti-Drop tab allows the speakers to be mounted temporarily in the ceiling for improved safety and ease of installation. A flexible carrying band makes the speakers very portable and allows carrying multiple speakers at once. Comes complete with O-rings and tile rails for safer and smoother installation. Overload protection circuit provided to protect speaker components. Comes with paintable speaker grilles for flexible design ideas. Supported by the dedicated software CISSCA (Commercial Installation Solutions Speaker Calculator). General Specifications Model VXC / VXCW Speaker Type 2-way, Coaxial type, Acoustic Suspension Components LF.5" Cone HF.75" Soft dome Coverage Angle *1 11 conical Nominal Impedance 8Ω Power Rating *2 NOISE 75W PGM 15W Sensitivity *3 (1W,1m) 8dB SPL Maximum SPL (Calculated, 1m) 111dB SPL Frequency Range *3-1dB 5Hz - 2kHz Connectors 1x Euroblock (4P) (Input: + / -, Loop Thru: + / -) Transformer Taps 7V W (83Ω), 3W (17Ω), 15W (33Ω), 7.5W (7kΩ) 1V W (17Ω), 3W (33Ω), 15W (7Ω) Color (Grille) VXC: Black / VXCW: White Dimensions (Diameter x D) Ø28 x 25mm (Ø11.3" x 8.1") Weight 4.4kg (9.7lbs) Required Ceiling Thickness 5-35mm Ceiling Cutout Hole Diameter 247mm Included accessories O-ring, Tile Rail, Cutout Template, Screws, Owner's Manual *1 5Hz - 4kHz *2 IEC *3 Half space 1
Ceiling Speaker VXC/VXCW Dimensions Unit: mm ø241 ø28 O-ring Tile Rail 8 32 28 38 25 189 Ø244 Ø34 32 1 44 2
Ceiling Speaker VXC/VXCW On-axis Frequency Response 12 2π Level [dbspl, 1W/1m] 11 1 9 8 7 5 1 1 1 1 1 Beamwidth 3-3dB db -9dB Angle [degree] 27 18 9 1 1 1 1 1 Directivity Index 3 Directivity Index [db] 2 1 1 1 1 1 1 3
Technical Data Sheet Ceiling Speaker VXC/VXCW Polar Plots 3 Hz Octave Band 33 3 27-3 3Hz 3 3 9 27 12 21 33 8Hz 24 15 3 27 5Hz 3 33 3Hz 3 9 27 15 3 9 12 15 33 5Hz 3 27 315Hz 9 12 15 2 Hz Octave Band 8H 8Hz 1Hz 3 33 125Hz 3 9 27-3 1H 1Hz 2Hz 3 25Hz 9 24 15-3 25Hz 3 18 12 21 15 18 8 Hz Octave Band 4Hz 2Hz 21 12 315Hz 24 18-3 -3 24 18 21 27 15 21 4 Hz Octave Band 27 3 9 24 18 3 1 Hz Octave Band 12 33 1Hz 12 4H 4Hz 24-3 33 18 21 125Hz 3 21 5 Hz Octave Band 33-3 1Hz 24 18-3 25 Hz Octave Band 125 Hz Octave Band 5Hz 1 Hz Octave Band 3Hz 8Hz 3 9 24 12 21 15 33 1Hz 3 27-3 4 1Hz 3 2Hz 9 24 12 21 15 18 18 125Hz
Ceiling Speaker VXC/VXCW Architectural and Engineering Specifications The loudspeaker shall be of in-ceiling design, a 2-way coaxial acoustic suspension type and shall have a back can. The loudspeaker shall consist of a.5 (1cm) cone driver for low frequency and a.75 (2cm) soft dome tweeter for high frequency. The loudspeaker shall be equipped with internal transformers that allow both high-impedance and lowimpedance drive. The Anti-Drop tab shall be provided for improved safety and ease of installation that allows the loudspeaker to be mounted temporarily in the ceiling. The flexible carrying band shall be provided for improved portability. The power rating shall be set by switching a transformer tap on the baffle as follows: W/3W/15W in 1V line; W/3W/15W/7.5W in 7V line; and 15W into 8 ohms. The loudspeaker shall be capable of meeting the following performance criteria: The measured sensitivity shall be 8dB SPL (at 1W, 1m, in half-space); The maximum SPL shall be 111dB SPL (at 1m); The frequency range shall be 5Hz-2kHz (1dB below rated sensitivity, in halfspace); The nominal coverage angle shall be 11 polar conical (average 5Hz-4kHz). The loudspeaker shall be provided for an overload protection circuit to protect network and transducers. The 4-pin Euroblock connector shall be provided for an input and a loop-thru. The back can shall be constructed of 1mm-thick black-painted steel and the baffle of HIPS. The grille shall be constructed of.mm-thick steel and the trim ring of ABS, with an aperture ratio of 51%. The grille shall have the following color variation: black-painted (VXC) or whitepainted (VXCW). Overall front face diameter of the loudspeaker shall not exceed 28mm (11.3 ), overall depth from the bottom of the ceiling shall not exceed 24mm (8.1 ), and shall weigh no more than 4.4kg (9.7lbs). The loudspeaker shall have included accessories as follows: The O-rings and the tile rails shall be included for safer and smoother installation. The loudspeaker shall be equipped with an eyelet for secondary safety wire usage. The loudspeaker shall be the Yamaha VXC or VXCW. Safety and Regulatory Compliance UL148 (UEAY) : Commercial and Professional Use (General-Utility). Suitable for use indoor in dry locations. UL243 : Suitable for use in air handling spaces. Memo *All specifications are subject to change without notice. *All trademarks and registered trademarks are property of their respective owners. 5 P.O.BOX 1, Hamamatsu Japan www.yamahaproaudio.com