SAFETY CABINETS FOR CORROSIVES INTRODUCTION: For safety reasons, acids and bases must be stored in safety in order to prevent any risk of leaks or breakages of bottles. You must also pay attention that different product families must be separated in compartments or stored into different. Some of our are divided in compartments, allowing storage of different product families. Toic and Antifire equipments and Files Showers and firstaid equipments This catalogue presents our of safety for several corrosives solutions of storage. Whatever your field of activity may be (laboratory, industry, warehouse, production unit, ), if you store corrosives (little to etremely corrosives), you must store them in safety. Do not hesitate to contact us for a personal and quick advice. WHAT IS A SAFETY CABINET FOR CORROSIVES? Two bread types of storage can be proposed concerning corrosives: The first type, dedicated to slightly corrosive products, are steel safety with high resistance paint. These offer additional protection in high density polyethylene or PVC for the shelves and the bottom retention tank. The second type, dedicated to high corrosive products (such as nitric, sulfuric, hydrochloric or fluohydric acids) are made in high density polyethylene or cellular PVC. These materials offer the perfect resistance to corrosives vapours. IS FORCED VENTILATION NEEDED? A forced ventilation is a prerequisite in order to improve the life cycle and the safety of a steel cabinet. Indeed, despite the fact that the steel is protected by a resistant epoy paint, nothing can protect against the possibility of corrosion inside a steel safety cabinet. Moreover, to protect the users health, it is highly recommended to install an ehausting system, whatever the material used for the cabinet, in order to eliminate any concentration of dangerous vapours inside the cabinet. We invite you to have a look at the different vent solutions proposed (fan, ehausting system, filtration by active coal, etc ) at the end of this catalogue to find the right one adapted to your needs. Do not hesitate to contact us for any information. CERTIFICATION: The homologated laboratory MPA Dresden (GER) has controlled and certified GS our safety (Range 8A page, Range page and Range page 7). The GS certification guarantees the quality and the very good level of security of our products (respecting our manufacturer recommendations). NORMALIZATION: FM (Factory Mutual): offers worldwide industrial and commercial product certification and testing services through its business unit FM Approvals. Recognized and respected across the globe, FM Approvals certification assures customers that a product or service has been objectively tested and complies to the highest national and international standards. Summary FM safety for corrosive products RANGE Page Corrosion resistant laboratory for acids and bases RANGE 8.A Page Polyethylene safety RANGE Page Safety with compartments RANGE.A Page Filtering ventilation safety (melaminebased wood) RANGE.X Page 7 Ventilation and filtration boes RANGE V Page 8 The manufacturer keeps the right to modify technical characteristics without notice. Edition /9.
FM NFPA OSHA UL FM SAFETY CABINETS FOR CORROSIVE PRODUCTS Toic B8M BM BS * According to models. Additional shelf. Industrial absorbent mats for retention tank ( pieces by pack) JFD. Eternal dim. H W D (mm) Internal dim. H W D (mm) Storage capacity (L) capacity (L) Number of shelves HDPE Protections 9 9 Additional shelf for litres cabinet 8 9 8 Additional shelf for 8 litres cabinet 9 89 7 79 9 8 Additional shelf for 9 litres cabinet 9 9 Additional shelf for litres cabinet 9 9 7 Additional shelf for 7 litres cabinet 8 8 77 78 8 Additional shelf for 8 litres cabinet The manufacturer keeps the right to modify the technical characteristics without notice. Edition /8. Built in double wall steel with 8 mm of insulating air space. Blue epoy paint. Adjustable galvanized spillslope safety steel shelves with high density polyethylene (HDPE) shelves trays. Selfclosing Selfclosing Selfclosing Selfclosing Selfclosing Selfclosing Selfclosing OPTIONS PASSIVE SECURITY BM BS B8M B8S ESP8 BM BS ESP BM BS ESP BM BS ESP BM BS ESP BM BS ESP and Sturdy construction for use in industry. Integrated selflatching handle. Selfclosing* or manual doors. Continuous piano hinge provides smooth closure. Various models available. Doors with lock ACTIVE SECURITY High and low vent Ø mm with grid. Continuous piano hinge. or selfclosing doors. points stainless steel bullet latching system. Doors with keylocking system. Réf. Liquid tight containment sump holds leaks on the bottom (mm heigh). Static ground connection. BM and BS models equipped with etra polywork tray. Weight 7 78 9 9 9 9 8 7 7 9 and Cans In compliance with NFPA (National Fire Protection Association), OSHA (Occupational Safety and Head Administration), UL (Underwriters Laboratories) and FM (Factory Mutual internationnal) specifications. Antifire equipments and Files RANGE
CORROSION RESISTANT LABORATORY CABINETS FOR ACIDS AND BASES Toic RANGE 8.A Secondary compartment APC APC APC APC9 APC APC Each compartment is divided in a major and a secondary storage area (ecept APC, APC and APC models). Large warning labels in compliance with ISO 8, 9/8/CEE European directive and NF X8. norm. In compliance with recommendations of The National Institute for research and Safety at work (I.N.R.S). Tested and approved GS by MPA DRESDEN laboratory. Especially designed for acid and bases storage. Built in cellular PVC with a great resistance to vapour aggressions and corrosive liquids. Cabinets with sliding drawers for acid or/and base storage. Built entirely in white cellular PVC. "", "Base" and "Toic" large warning labels (only the for APC model). Adjustable retention sliding drawers for each major compartment. Independant compartments (ecept APC model) for acid, base or/ and toic products storage (only for APC model). Antifire equipments and Files PASSIVE SECURITY Eternal Dim. H W D (mm) APC 7 APC 7 APC9 8 APC 9 APC 8 APC 8 Number of compartment Major Secondary ACTIVE SECURITY High and low opening vent Ø mm with connecting piece for possible ehaust. Door(s) with lock: Handling door(s) for APC, APC9 and APC models. Sliding doors for APC, APC and APC models. Adjustable leveling jack feet. To protect the users health and to improve the life cycle and the safety of your cabinet, we recommend to install an ehausting system. Contact us for more information. Number of retention Shelves in sedrawers in condary comp. major comp. 8 Storage capacity 8 9 9 7 W. capacity (l) 8 8 88 7 7 8 9 89 The manufacturer keeps the right to modify technical characteristics without notice. Edition /9. and
RANGE POLYETHYLENE SAFETY CABINETS FOR ACIDS AND BASES RB Toic RB RB ACTIVE SECURITY Large warning labels in compliance with ISO 8, 9/8/CEE European directive and NF X8. norm. Tested and approved GS by MPA DRESDEN. Front opening with retractable door. Door(s) with lock (for each level). and RB RB RBVENT RB RBVENT RB RBVENT RB RBVENT RBROU Eternal Dim. H W D (mm) Safety with compartment 8 9 Opening vent for RB (must be ordered with the cabinet) Safety with compartments 9 9 Opening vent for RB (must be ordered with the cabinet) Safety with compartments 9 Opening vent for RB (must be ordered with the cabinet) Safety with compartments 7 9 Opening vent for RB (must be ordered with the cabinet) swivel castors for RB or RB Description Internal Dim. H W D (mm) 8 Storage capacity (L) () 8 7 () 8 () 8 Weight, Antifire equipments and FIles Entirely built in light grey high density polyethylene (HDPE). Acid and Base warning labels. Removable retention tank in PVC (at each level; retention capacity l per tank). To protect the users health and to improve the life cycle and the safety of your cabinet, we recommend to install an ehausting system. Contact us for more information. PASSIVE SECURITY swivel castors for RB and RB models ( mm of etra height). Opening vent Ø mm (must be ordered with the cabinet). The manufacturer keeps the right to modify technical characteristics without notice. Edition /9. Especially designed for acids and bases storage. Built in high density polyethylene (HDPE) with a high resistance to vapours and corrosive liquids. Equiped with shelves for acid and base separate storage (eept model RB). OPTIONS
C SAFETY CABINETS WITH COMPARTMENTS RANGE.A Toic Fan integrated AB7 AB Large warning labels in compliance with ISO 8, 9/8/CEE European directive and NF X8. norm. Tested and certified GS by MPA DRESDEN laboratory. marking. Antifire equipments and FIles ACTIVE SECURITY High and low vents Ø mm (for possible eternal conneion). Handling doors with keylocking system. VHz electric fan. Stricktly separated acid and base storage in compliance with the National Institute of research and Safety at work. OPTIONS Industrial absorbing mat (ref. JFD). Fleible tube (ref. KL). Clamp collar (ref. CDS). PASSIVE SECURITY Additional retention shelves in PVC for "Acid" compartments. Removable base through in steel at the bottom of each compartment (ecept "Acid" compartments: base through in PVC). Built in steel /th. Double wall doors in steel /th. White epoy paint RAL 9. "Acid" and "Base" large warning labels. shelves in steel adjustable in height. AB Description Dimentions H W D (mm) Tall cabinet with fan AB7SC Tall cabinet without fan AS7SC Tall cabinet without fan Storage (l) (l) Nb of shelves Nb of base through Underbench cabinet with fan Et. 8 ABSC Underbench cabinet without fan Int. () 7 ASSC Underbench cabinet without fan AB7 Compartment capacity Et. 8 Int. () 89 7 Et. 8 Int. () 89 7 ( ) ( ) (8) 7 () Compartment type W. Fan 9 m/h m/h 7 8 The manucfaturer keeps the right to modify technical characteristics without notice. Edition /9. and Additional shelf in PVC
RANGE.X FILTERING VENTILATION SAFETY CABINETS (MELAMINEBASED WOOD) s Adsorption capacity in compliance with NF X norm. Large warning labels in compliance with ISO 8 and NF X8. norms, 9/8/CEE European directive. In compliance with the health regulation articles (R and R8). Tested and approved GS by MPA DRESDEN. Electric fan in compliance with specifications. Toics Cabinet delivered ready to use. Independent cabinet ensuring perfect security. Elimination of dangerous vapours. No need of connection to an ehausting system. No modification of building structure required. Easy sight of the stored products. Perforated shelves allowing liquids flow in case of discharge. Ventilation system with lighting control. Window control for presence of the filter adapted to your needs. Control of the saturation level with reactive coded tubes. Specialised high efficiency actived charcoal filter treated following chemical products stored. Dust prefilter, 9% efficienty with less then µm particles. Easy chane of actived charcoal cell. CAUTION! The actived charcoal filter must be changed at least once a year Storage capacity AFX ORG COR Description Et. Dimensions Int. Dimensions H W D (mm) H W D (mm) Safety cabinet in melaminebases wood without filter 9 8 7 (bottles) L or, L capacity (L) Weight or Actived charcoal filter for organic vapours (yellow) 7 7 8 Actived charcoal filter for corrosive vapours (blue) 7 7 8 PMAF pump, TROR Pack of reactive tubes for organic tests,8 TRAC Pack of reactive tubes for corrosive tests,8 TROA SFA Pack of reactive tubes for organic tests and reactive tubes for corrosive tests Filteralarm (to order imperatively with cabinet),8 ESAF Additional shelf for AFX and shelvings Cans and antifire equipments Additional shelf. Actived charcoal filters: The are delivered without actived charcoal filter. You must to select one in the table (at the bootm of this page) depending on your products storage. Control of filter saturation level by FILTRALARM: Control lead. Adjustement allowing the detection of filter saturation level and faulty air flow. Sound alarm indicating a malfunction in the device. Light alarm system. Control of filter saturation level by REACTIVE TUBES: Control port on the side of the cabinet. Use of a manual pump. Control of efficienty of active coal filter s saturation level by observing the tubes. OPTIONS The manufacturer keeps the right to modify technical characteristics without notice. Edition /8. Storage compartment: Built in white malaminebased wood. Large glazed door with framing. perforated shelves adjustable in height. Double air inlet at the bottom. Keylocking system. Drawer/retention tank at the bottom with absorbing mat. Ventilation/filtration compartment: Buit in /th steel with white epoy paint (RAL 9). Noiseless fan : volts Hz, A 7 watts; flow: m/h; IP protection, sound level 9 db(a); delivered with cable and plug. and TECHNICAL SPECIFICATIONS
RANGE V CDVA + KRC option ISO 7 C VENTILATION AND FILTRATION BOXES CDFP + KRC option and Toic Antifire equipments and Files Showers and firstaid equipments VENTILATION BOX (CDVA) USE AREA The electric fan allows the etraction of toic vapours generated inside your safety cabinet. Fan in compliance with ISO 7; marking. Fan in compliance with ATEX on request. Please contactus. Adaptable to all of our. Simple and aesthetic fitting. Easy connection between the cabinet and the vent bo. Connection by fleible tube Ø mm (in option). Lighting control allowing to survey the proper working of the fan. TECHNICAL SPECIFICATIONS Built in steel /th. White epoy paint RAL 9. Steel electric scroll engine installed on silentblocs: / volts Hz 97 W, A, db(a) Flow: m/ hour Protection IP Ehaust inlet and outlet: Ø mm. Switch ON/OFF with lighting control. CONNECTING KIT (KRC) This kit allows to connect easily your vent bo to your safety cabinet: connection unit Ø mm(ref. CHJ) to be fied on the cabinet air outlet. metre of fleible tube Ø mm (ref. KL). clamp collars Ø mm (ref. CDS). FILTRATION BOXES (CDFA for flammable and toic vapours and CDFP for corrosive vapours) USE AREA The electric fan allows the ehaust of toic vapours generated inside your safety cabinet. The vapours are purified by the active coal filter and rejected without danger in the atmosphere. Electric fan in compliance with ISO 8, 9/, AMCA 8; marking. Electric fan in compliance with ATEX norm on request. Please contact us. Adaptable to all of our. No modification of building's structure required. Simple and aesthetic fitting. Easy connection between the cabinet and the vent bo. Connection by fleible tube Ø mm (in option). TECHNICAL SPECIFICATIONS Filtration bo CDFA model (not shown on the picture) Built in steel /th. White epoy paint RAL 9. Filtration bo CDFP model. Built in Cellular PVC. White colour. Each bo contains independent compartments: Filtration compartment: Active coal filter type «candle» H X Ø mm (CDFF model) must be changed at least once a year. Filter settled on the bo by lugs and airtightness insured thanks to a rubber seal. Ventilation compartment: Electric engine : / volts Hz W,9 A db(a) Flow 8m/hour Protection IP Ehaust intlet Ø mm / outlet Ø mm. Description Dimensions Equiped with active Weight H W D (mm) coal filter CDVA Ventilation bo in steel 9 no 9, CDFA Filtration bo in steel with filter 8 8 CDFF CDFP Filtration bo in cellular PVC with filter 8 CDFF KRC Connecting kit for bo KL metre fleible tube Ø mm, CHJ Connection unit Ø mm, CDS Clamp collar Ø mm CDFF Active coal filter for "standard" vapours (green) Filter must be changed CDFF Active coal filter for organic vapours (yellow) at least once a year CDFF Active coal filter for corrosive vapours (blue) The manufactured keeps the rights to modify technical characteristics without notice. Edition /9.