VENTILATION & HEATING CATALOGUE www.simx.co.nz
TABLE OF CONTENTS HOME VENTILATION AND HEAT TRANSFER SmartVent Positive Selection Guide 150 SmartVent Positive System Ducting Guide 151 SmartVent Positive Specifications and Controllers 152 Single Room Heat Recovery 153 SmartVent Synergy Selection Guide 155 SmartVent Synergy System Ducting Guide 157 SmartVent Synergy How They Work 158 SmartVent Accessories 159 HeatTrans Systems 160 149
SMARTVENT POSITIVE SELECTION GUIDE 150 The size of the home (m2) Evolve temperature and humidity sensor capabilities and Tablet Supply Outlets SmartVent System Order Codes 1 SV01C FAN2023 Up to 70m² - 2 Extension Kit DCT2276 1 SV01 (no controller) FAN1056 Up to 100m² Yes 2 SV02E FAN2113 3 Extension Kit DCT2276 No 2 SV02 FAN0939 3 Extension Kit DCT2276 Up to 280m² Yes 4 SV04E FAN2115 5-6 Extension Kit/s DCT2276 No 4 SV04 FAN1057 5-6 Extension Kit/s DCT2276 Up to 560m² Yes 6 SV06E FAN2117 7-12 Extension Kit/s DCT2276 No 6 SV06 FAN1064 7-12 Extension Kit/s DCT2276 IMPORTANT If you exceed the number of rooms listed in the selection guide above, the performance of the system will not work as designed. Maximum outlets are listed above, do not exceed the number listed. For the SV06 systems, a total of 6 extension kits can be added, however do not exceed 3 extension kits per branch of the system. Optional Extras Kit SV01 SV01C SV02 SV02E SV04 SV04E SV06 SV06E Second Air Source Kit - DCT2134 DCT2134 DCT2128 DCT2135 Outdoor Air Supply Kit FAN6264 FAN6264 FAN6264 - - - Heat Transfer Kit - - FAN2027 FAN2028 Tempering Heater FAN2028 (1 branch) FAN4438 (both branches) 1 kw DCT2123 DCT1226 DCT1226 DCT3478 DCT1483 DCT3231 DCT1483 DCT3231 2 x 1 kw - - - - - - DCT1491* DCT3418* 2 kw - - - - DCT1484 DCT3230 DCT1484 DCT3230 Digital PTC Room Heater 1.6 kw DCT4039** DCT4039** DCT4039** - DCT4039** - DCT4039** - Evolve PTC Room Heater 1.6 kw - - - DCT4037 - DCT4037 - DCT4037 Additional Fan Kit 150mm - FAN5836 FAN5836 FAN5836 - FAN5836 Additional Fan Kit 200mm - FAN5837 FAN5837 FAN5837 - FAN5837 * DCT1491 / DCT3418 consist of 2 x 1kW units for installation into each branch of an SV06/E system. ** When adding more than one PTC Room Heater into the digital system contact Simx Technical Support for advice on 09 259 1660 BEFORE PLACING ORDER. Additional Outlet/s Kit SV01 SV01C SV02 SV02E SV04 SV04E SV06 SV06E Additional Outlet DCT2276 Note: Exceeding the number of rooms listed in the Selection Guide (by product) may affect the performance of the system and should be reviewed with SmartVent prior to purchase and installation.
SMARTVENT POSITIVE SYSTEM DUCTING GUIDE SV01 / SV01C SV02 / SV02E SV04 / SV04E SV06 / SV06E Note: For SV06 systems the ducting diagram below is duplicated. Simx Limited www.simx.co.nz sales@simx.co.nz 151
SMARTVENT POSITIVE SPECIFICATIONS & CONTROLLERS Kits SV01/SV01C SV02/SV02E SV04/SV04E SV06/SV06E No Controller (SV01 only) FAN1056 Digital Controller (SV01C) FAN2023 FAN0939 FAN1057 FAN1064 Evolve Tablet controller (E Models) FAN2113 FAN2115 FAN2117 Specifications SV01/SV01C SV02/SV02E SV04/SV04E SV06/SV06E House size* up to 70m² up to 100m² up to 280m² up to 560m² Max. Air Flow 620 m³/hr 620 m³/hr 920 m³/hr 1840 m³/hr Fan Type (Centrifugal) 150mm 150mm 200mm 2x 200mm Fan Speeds 3 3 3 3 Supply Outlets 1 2 4 6 Default Air Source Roof space Roof space Roof space Roof space Sound level 47 db(a) 47 db(a) 53 db(a) 53 db(a) Max Operating Temperature 60 C 60 C 60 C 60 C Min. setting 0 C 0 C 0 C 0 C Max. setting 35 C 35 C 35 C 35 C Operating hysteresis temperature - 2 C 2 C 2 C Minimal Differential - 5 C 5 C 5 C Temperature Accuracy (at source) - ± 1 C ± 1 C ± 1 C Power Supply 220-240 VAC 220-240 VAC 220-240 VAC 220-240 VAC (Must be mains earthed) 50 Hz 50 Hz 50 Hz 50 Hz Controller Connection - / 10m RJ45 10m RJ45 / Wireless 10m RJ45 / Wireless 10m RJ45 / Wireless Filter/s F7 (Inline) F7 (Inline) F7 (Inline) F7 (Inline) Positive Evolve The Evolve controller operates on the humidity level or temperature in and around the home. Positive Digital The Positive digital controller uses the temperature in the roof space and your living area* to manage ventilation. * If heat transfer upgrade is installed. Evolve Upgrade for Digital Controlled Systems DCT3432 Upgrade Digital SmartVent Systems to Positive Evolve. Contains all you need to convert SmartVent Positive Digital to SmartVent Positive Evolve. 152 DCT3432
SINGLE ROOM HEAT RECOVERY OVERVIEW This single room heat recovery fan meets the performance requirements for continuous ventilation under the NZ Building Regulations. With a 100mm diameter heat recovery outlet, this unit has low energy consumption and low noise levels. Synergy Single Room Heat Recovery can be set to run continuously at 6l/s (for rooms up to 25m 2 )* or 9l/s (for rooms up to 37m 2 )*, boosting up to 13l/s, recovering energy from the extracted air and returning it to the dwelling. The unique, compact heat exchanger has a temperature effi ciency up to 80%, saving energy on heating and reducing your carbon footprint while providing ventilation. Description Suitable for Wall Thickness (mm) Order Code Synergy Single Room Heat Recovery - Standard Up to 320 FAN4439 Synergy Single Room Heat Recovery - Long 321-460 FAN5945 Constant trickle ventilation (24 Hours, 7 Days) with airfl ow boost option. Supply & extract airfl ows are separated. This means that any moisture extracted from the room is not re-introduced. Low energy consumption. Low noise. Security - reduces risk of theft as windows are not required to be left open. Health - introduces fresher, drier air from outside helping to reduce condensation and improve air quality. Can be switched to extract only if desired. 5 year Warranty. WORKING DIAGRAM 02 01 02 Moist/stale air is extracted from the home. Extracted moist/stale air exits the home. 03 03 04 Fresh drier air supplied from outside. Warmed supply air enters the home. 01 04 Simx Limited www.simx.co.nz sales@simx.co.nz 153
SINGLE ROOM HEAT RECOVERY OVERVIEW. DIMENSIONS (MM) Order Code A B C D E F G FAN4439 190 266 262 117 496 99 321 FAN5945 190 266 262 117 636 99 461 A D EF F C GE Ø100 B PERFORMANCE Model FAN4439/ FAN5945 Extract Performance l/s Power Consumption Watts Sound @db(a)* Trickle Low Trickle High Boost Trickle Low Trickle High Boost Trickle Low Trickle High 6 9 15 3.2 5.7 26.6 20 22 36 Boost *Octave band frequency range of 250Hz to 4KHz at 3m. Unit mounted on a refl ective surface. HEAT EXCHANGER DIAGRAM Fresh Warm Air returning to dwelling Stale Warm Air from dwelling Stale Cool Air Out Fresh Warm Air returning to dwelling Fresh Cold Air In 154
SMARTVENT SYNERGY SELECTION GUIDE The size of the home (m2) Up to 150m2 Up to 250m2 Up to 350m2 Supply Rooms Extract Rooms SmartVent Synergy System Order Code 3 1 Synergy 190E FAN2177 4 2 Supply & Extract Extension Kits DCT2276 Supply Kit DCT2289 Extract Kit 3 1 Synergy 1015E FAN6065 4 2 Supply & Extract Extension Kits 3 1 Synergy 2025E FAN6067 4 2 Supply & Extract Extension Kits 3 1 Synergy 3035E FAN6069 DCT4015 Supply Kit DCT4016 Extract Kit DCT4015 Supply Kit DCT4016 Extract Kit 4 2 Supply & Extract Extension Kits DCT4015 Supply Kit DCT4016 Extract Kit 5 2 Synergy 405 FAN2191 6 3 Supply & Extract Extension Kits DCT2334 Supply Kit DCT2335 Extract Kit Optional Extras Kit Synergy 190E Synergy 1015E Synergy 2025E Synergy 3035E Synergy 405 Second Air Source DCT4017 Included Heat Transfer FAN2027 FAN2027 FAN2027 FAN2027 - Tempering 1 kw DCT3478 DCT3231 DCT3231 DCT3231 DCT1483 Heater 2 kw - DCT3230 DCT3230 DCT3230 DCT1484 TSC PTC Room 1.6 kw - - - - DCT4039 Heater Evolve PTC Room Heater 1.6 kw DCT4037 - Core By-pass Kit FAN2172 Included Included Included Included Heat Boost - - - - Included Remote Sensor - - - - FAN2047 Additional Information These recommendations are based on the standard components in the system. This selection guide assumes 2.4m stud height, if greater please increase the square metre size by 4% for every 0.1 metre. For example for a 2.8m stud height, increase your house size by 16%. If you choose to exceed the number of rooms listed in the selection guide above, the performance of the system will be affected. This selection guide assumes that there is suffi cient ceiling space to install all componentry. By adding additional outlets to the system you are simply dividing the available air amongst more rooms. Extra duct may be required depending on the size & layout of the home. See accessories on page 159. For larger homes please contact SmartVent for technical advice. A SmartVent Synergy system with in-line tempering heaters is not intended to be a substitute for an effective heating system in the home. An Inline PTC Room Heater is an effective room heating solution providing fresh air warmed to a comfortable temperature. Simx Limited www.simx.co.nz sales@simx.co.nz 155
SMARTVENT SYNERGY SELECTION GUIDE Additional Outlet/s & Extracts Kit Synergy 190E Synergy 1015E Synergy 2025E Synergy 3035E Synergy 405 Additional Outlet DCT2276 DCT4015 DCT4015 DCT4015 DCT2334 Additional Extract DCT2289 DCT4016 DCT4016 DCT4016 DCT2335 Note: Exceeding the number of rooms listed in the Selection Guide (by product) may affect the performance of the system and should be reviewed with SmartVent prior to purchase and installation. DCT2276 DCT4015 DCT2334 DCT2289 DCT4016 DCT2335 156
SMARTVENT SYNERGY SYSTEM DUCTING GUIDE Note: The layouts below are intended as a guide only, refer to the Kit Contents list and latest system installation manual for the specifi c product details and layout. OA = Outside Air SA = Supply Air RA = Return Air EA = Exhaust Air Synergy 190E Synergy 1015E / 2025E / 3035E Synergy 405 Simx Limited www.simx.co.nz sales@simx.co.nz 157
SMARTVENT SYNERGY HOW THEY WORK Synergy 190E Synergy 1015E / 2025E / 3035E No Condensation Drain Synergy 405 Extracted moist/stale air exits the home, Fresh drier air supplied from the roof cavity or outside, Moist, humid air is extracted from the home, Warm supply air enters the home 158
SMARTVENT ACCESSORIES ACOUSTIC INSULATED DUCTING INSULATED DUCTING 150mm diameter x 3m DCT0633 150mm diameter x 3m DCT0583 150mm diameter x 6m DCT0634 150mm diameter x 6m DCT0584 200mm diameter x 3m DCT0635 200mm diameter x 3m DCT0585 200mm diameter x 6m DCT0636 200mm diameter x 6m DCT0586 UNILOK NUDE DUCTING DUCT FASTENERS 150mm diameter x 3m DCT0561 Hanging Strap DCT2299 150mm diameter x 6m DCT0562 Duct Tape 48mm x 5m DCT0173 200mm diameter x 3m DCT0563 Duct Tape 48mm x 30m DCT0807 200mm diameter x 6m DCT0564 Duct Tape 48mm x 108m DCT3232 NOISE REDUCTION FAN HOUSING 150/200 Centrifugal Fan DCT2297 150/200 Mix Flow Fan DCT2298 DUCT CONNECTORS 150mm metal 200mm metal DCT0723 DCT0724 REPLACEMENT FILTERS FIXED LOUVRE GRILLES G4 Sock G4 Filter F7 Filter F7 with Carbon Filter HEPA with Carbon Filter DCT1411 DCT2221 DCT2093 DCT2277 DCT2278 125mm White DCT0041 150mm White DCT0063 200mm White DCT0340 CONNECTION ACCESSORIES RJ45 to RJ45 Connector FAN2408 EXTENSION LEADS 3m Fan lead (4 wire) FAN2190 3m Heater or Damper lead (3 wire) FAN2194 Y BRANCH 150-150-150 DCT1233 200-150-150 DCT0379 CONTROLLER SOFTWARE UP-GRADE Positive Pressure Digital Up-grade to (Software V3.00) FAN2065 MANROSE FLAT CEILING DIFFUSER 150mm White DCT2208 Simx Limited www.simx.co.nz sales@simx.co.nz 159
HEATTRANS SYSTEMS HeatTrans uses excess heat to warm other areas of the home by transferring it from one room to multiple rooms. HeatTrans is the professional brand in heat transfer systems and is the brand of choice for electrical contractors. Leading the market for over 15 years, HeatTrans is at the forefront of product development and innovation and are the only heat transfer systems using acoustic insulated ducting and digital touch screen controllers. HOW DOES HEATTRANS WORK MODELS 01 Excess heat from your heat source will rise to ceiling level where it is trapped. This excess heat can reach temperatures of 30-35 C. MODEL Order Code HeatTrans One Room Kit FAN0325 HeatTrans Two Room Kit FAN0337 HeatTrans Three Room Kit FAN0338 Pro-Series One Outlet Extension Kit DCT2101 02 This excess heat can be effectively transferred to other rooms using a high quality fan and acoustic insulated ducting. HeatTrans Summer-Vent Extension Kit DCT1481 HeatTrans Thru Wall Kit FAN0005 AUTOMATED THERMOSTAT 03 Air moves from the bedrooms back to the lounge creating a natural recirculation of warm air throughout the home. Model No. Description Order Code UT-T1 Touch Screen Automated Thermostat FAN5555 High quality, easy to use heat transfer thermostats. Electronic temperature sensor. FAN5555 is included in HeatTrans systems. 160