SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INTERTEK TESTING SERVICES NA, INC. 1809 10 th Street, Suite 400 Plano, TX 75074 Authorized Representative: Charles Parker Phone: 972-202-8800 MECHANICAL Valid to: September 30, 2019 Certificate Number: 2310.02 In recognition of the successful completion of the A2LA evaluation process, (including an assessment of the laboratory s compliance with A2LA s EPA ENERGY STAR Accreditation Program requirements 1 ) accreditation is granted to this laboratory to perform the following HVAC, Gas Appliance, and Energy Efficiency tests: Test Technology: Test Method(s) 2 : HVAC ASHRAE 37; ANSI/ASHRAE 118.1; AHAM PAC-1; AHAM DH-1; AHRI 210/240; AHRI 340/360; AHRI 390; AHRI 365: AHRI 420; AHRI 440; AHRI 550/590; AHRI 810; AHRI 840; AHRI 1160; AHRI 1301; AHRI 1200; AHRI 1230; AHRI 1250; AHRI 1360; CSA-C746; ISO 13256-1; ISO 5151; ISO 1217; ISO 7183; SASO 2663 (2007); SASO 2663 (2012); SASO 2663 (2018); SASO 2681 (2007); SASO 2681 (2013); SASO 2682 (2007); SASO 2682 (2013); SASO 2874 (2016); EN14511-3; AHRI BTS-2000, rev 06.07; ANSI/AHRI 1160-2009; ANSI/AHRI 1161-2011; ASHRAE 146-2006; ANSI/AHRI 1300-2013; ANSI/AHRI 1301-2013; ANSI/ASHRAE 118.1-2012 Gas Appliances (including, Boilers, Water Heaters, Furnaces, Heaters and Cooking Appliances) AS 2658; AS 4551; AS 4552; AS 4553; AS 4554; AS 4556; AS 4557; AS 4560; AS 4563; AS 4565; SASO 57:1977; SASO 58:1977; SASO 59:1994; SASO 69:1944; SASO 167:2000; SASO 2884:2017; EN 26 (excluding non-vented type AAS); EN 30-1-1; EN 30-1-2; EN 30-1-4; EN 30-2-1; EN 30-2-2; EN 89; EN 203-1; EN 203-2-1; EN 203-2-2; EN 203-2-3; EN 203-2-4; EN 203-2-6; EN 203-2-7; EN 203-2-8; EN 203-2-9; EN 203-2-10; EN 203-2-11; EN 203-3; EN 297; (A2LA Cert. No. 2310.02) Revised 08/15/2018 Page 1 of 5
Gas Appliances (Cont d) EN 298; EN 437; EN 449; EN 461; EN 483; EN 484; EN 497; EN 498; EN 509; EN 521; EN 613; EN 621; EN 624; EN 625; EN 656; EN 676; EN 677; EN 778; EN 1020; EN 1196; EN 1266; EN 1319; EN 1458-1; EN 1458-2; EN 15033; EN 1596; EN 12752-1 (withdrawn 4/20/2012) 4 ; EN 12752-2 (withdrawn 4/20/2012) 4 ; EN 15502-1; EN 15502-2-1; EN 15502-2-2 Energy Efficiency Household Electrical Appliances: Measurement of Standby Power IEC 62301 Refrigerators and Freezers SASO 2664:2007; SASO 2664:2013; SASO 2892:2018; EN 153:2006; IEC 62552:2007; EN 62552:2013 Water Heaters (Gas and Electric) UAE.S 5010-4:2014; IEC 60379:1986 Gas Appliances (Furnaces and Heaters) ANSI Z21.47; CSA 2.3; ANSI Z83.8; CSA 2.6; CSA P.11 HVAC Products Central ACs and Air-Source Heat Pumps Geothermal Heat Pumps Water-to-Air (Open or Closed systems) Geothermal Heat Pumps Water-to-Water (Open or Closed systems) Geothermal Heat Pumps DGX Systems Specification for Air Source Heat Pump (ASHP) and Central Air Conditioner Equipment (ver 5.0) (including 10 CFR part 430 Subpart B, Appendix M) Specifications for Geothermal Heat Pumps (ver 3.1) (including ISO 13256-1-1998) Specifications for Geothermal Heat Pumps (ver 3.1) (including ISO 13256-2-1998) Specifications for Geothermal Heat Pumps (ver 3.1) (including ANSI/AHRI 870-2005) (A2LA Cert. No. 2310.02) Revised 08/15/2018 Page 2 of 5
HVAC Products (Cont d) Light Commercial HVAC Air-Source Central Air Conditioners and Heat Pumps < 65,000 Btu/h: 3-phase, Single package, or split systems, and 65,000 Btu/h to < 240,000 Btu/h Variable Refrigerant Flow (VRF) Equipment Furnaces Boilers Residential Water Heaters (Gas, Electric, Solar, and Light Duty EPACT-Covered Gas) (FHR only for storage units, GPM only for instantaneous) Commercial Water Heaters Appliances Residential Refrigerators & Freezers Residential Dishwashers ENERGY STAR Program Requirements for Light Commercial HVAC (ver 3.1) (including ANSI/AHRI 210/240-2008, ANSI/AHRI 340/360-2007, and AHRI 1230-2010) Specifications for Furnaces (ver 4.1) (including 10 CFR Part 430, Appendix N, and ANSI/ASHRAE 193-201); Specifications for Boilers (ver 3.0) (including 10 CFR Part 430 Appendix N) Specifications for Residential Water Heaters (ver 3.2) (including 10 CFR Part 430 Subpart B, Appendix E, 10 CFR Part 431 Subpart G, and SRCC-OG-300) Specifications for Commercial Water Heaters (ver 1.0) (including 10 CFR Part 431.106 and 10 CFR Part 430, Subpart B, Appendix E) for Residential Refrigerators and Freezers (ver 5.0) (including 10 CFR 430 Subpart B, Appendix A, and B) for Residential Dishwashers (ver 6.0) (including 10 CFR 430, Subpart B, Appendix C1) (A2LA Cert. No. 2310.02) Revised 08/15/2018 Page 3 of 5
Appliances (Cont d) Residential and Commercial Clothes Washers Residential and Commercial Clothes Dryers Commercial Food Service Equipment Commercial Refrigerators & Freezers Commercial Dishwashers Commercial Fryers Commercial Griddles Commercial Hot Food Holding Cabinets Commercial Ovens (Combination, Convection and Rack Ovens) Commercial Steam Cookers Commercial Ice Makers for Clothes Washers (ver 8.0) (including 10 CFR Part 430 Subpart B, Appendix J1 and J2) for Clothes Dryers (ver 1.1) (including 10 CFR Part 430 Subpart B, Appendix D2) for Commercial Refrigerators and Freezers (ver 4.0) (including 10 CFR 431 Subpart C, 10 CFR Part 431.64 and 10 CFR Part 431.66(e)(2)) for Commercial Dishwashers (ver 2.0); ENERGY STAR Test Method for Commercial Dishwashers for Commercial Fryers (ver 3.0) (including ASTM F1361-07 (2013) and ASTM F2144-09) for Commercial Griddles (ver 1.2) (including ASTM F1275-03 and ASTM F1605-01) for Commercial Hot Food Holding Cabinets (ver 2.0) (including ASTM F2140-11) for Commercial Ovens (ver 2.2) (including ASTM F1496-13, ASTM F2861-10 and ASTM F2093-11) for Commercial Steam Cookers (ver 1.2) (including ASTM F1484-99) for Automatic Commercial Ice Makers (ver 3.0); (including AHRI 810-2007, 10 CFR Part 431 Subpart H with the guidance included in Section 4.1) (A2LA Cert. No. 2310.02) Revised 08/15/2018 Page 4 of 5
Other Pool Pumps for Pool Pumps (ver 1.1); ENERGY STAR Pool Pumps Test Method (Rev. Jan 2013) ENERGY STAR Pool Pumps Test Method to Validate Demand Response (Rev. March 2015) Vending Machines Water Coolers ENERGY STAR Program Requirements for Refrigerated Beverage Vending Machines (ver 3.1); (including 10 CFR Part 431 Subpart Q and 10 CFR 431.294) ENERGY STAR Program Requirements for Water Coolers (ver 2.0); ENERGY STAR Water Coolers Test Method (Rev. May 2013) 1 A2LA provides accreditation to the U.S. EPA s Conditions and Criteria for Recognition of Laboratories for the ENERGY STAR Program by verifying an organization s compliance to A2LA document R222 - Specific Requirements - EPA ENERGY STAR Accreditation Program and to the related test methods listed above. Accreditation by A2LA does not infer Recognition by the EPA for ENERGY STAR testing. Please verify this organization s recognition status by using the EPA s searchable database, located at http://www.energystar.gov/index.cfm?fuseaction=recognized_bodies_list.show_rcb_search_form 2 When the date, revision or edition of a test method standard is not identified on the scope of accreditation, the laboratory is required to be using the current version within one year of the date of publication, per part C., Section 1 of the R101 - General Requirements - Accreditation of ISO-IEC 17025 Laboratories. 3 Includes all revisions of the test standard 4 This laboratory s scope contains withdrawn or superseded methods. As a clarifier, this indicates that the applicable method itself has been withdrawn or is now considered historical and not that the laboratory s accreditation for the method has been withdrawn. (A2LA Cert. No. 2310.02) Revised 08/15/2018 Page 5 of 5
Accredited Laboratory A2LA has accredited INTERTEK TESTING SERVICES NA, INC. Plano, TX for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This laboratory also meets the A2LA R222 - Specific Requirements - EPA ENERGY STAR Accreditation Program. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated April 2017). Presented this 27 th day of April 2018. President and CEO For the Accreditation Council Certificate Number 2310.02 Valid to September 30, 2019 For the tests to which this accreditation applies, please refer to the laboratory s Mechanical Scope of Accreditation.