ZENITH PEBBLE DESIGNED BY SCHAMBURG & ALVISSE
ZENITHINTERIORS.COM.AU Features Modular by design and versatile by nature, Pebble lives life outside the square. Born out of the rugged landscape of north west Australia, Pebble s bold geometry sports a forest-friendly frame padded with eco foams - all given the thumbs up by GECA and the GBCA. Hours of fun are to be had arranging Pebble into endlessly imaginative collaborative settings. Finishes Fabrics: As per customer specifications. Legs: Black nylon glides. Connection clips available by request. Table: Stainless steel. Certification GECA: Excludes Pebble Side table, Laptop table FSC: Excludes Pebble Side table, Laptop table Design: Marc Schamburg & Michael Alvisse Marc Schamburg ( Bach. Design) + Michael Alvisse ( Bach. Architecture ) are design entrepreneurs and co-founders of the sustainable furniture studio, Schamburg + Alvisse, established 1997. Schamburg + Alvisse pioneered the design and manufacture of sustainable furniture a decade before green standards were embraced by the construction industry. Successfully up-cycling post-consumer waste plastics into high value product remains a milestone for the studio, alongside becoming Australia s first furniture manufacturer to satisfy the rigorous green timber standards of the Forestry Stewardship Council (FSC) and Greenpeace. need image of pebble with back Ottoman S,M,L, XL,XXL Table Long Ottoman 1200 & 1800 See Specification sheet for dimensions & configurations
PEBBLE SCHAMBURG + ALVISSE SPECIFICATION PEBBLE OTTOMAN MODELS Pebble S; Pebble M; Pebble L; Pebble XL; Pebble XXL; Pebble 1200; Pebble 1800 STANDARD FEATURES FSC hardwood + plywood frame; CFC free sub HR foam; Black nylon glides; Upholstered in fabric, leather or vinyl PEBBLE WITH BACK MODELS Pebble M with back; Pebble L with back; Pebble 1200 with back; Pebble 1800 with back STANDARD FEATURES FSC hardwood + plywood frame; CFC free sub HR foam; Back: 100% recyclable high density moulded polyethylene; Black nylon glides; Upholstered in fabric, leather or vinyl BACKS AL: Low Back to suit Pebble M, 1200 & 1800; AH: High Back to suit Pebble 1200 & 1800; BL & BH: to suit Pebble 1200 & 1800; CL: Low Back to suit Pebble 1200 & 1800; CH: High Back to suit Pebble 1200 & 1800 Note: Loose Lumbar back cushions available in three sizes; short, square or long. Pebble M can only be specified to have an AL (Low back) to ensure stability. Backs can be specified to all sides of the Pebble Ottoman except on the side of the waterfall edge due to the position of feet. PEBBLE TABLES MODELS Stainless Steel Table; Pebble Pedestal Table STANDARD FEATURES Stainless Steel Table - Three sizes S, M, & L Pebble Pedestal Tables - White laminate & Ash veneer top with exposed plywood edge, clear finish; steel tube column; White textured matt powder coat finish CERTIFICATION GECA: Excludes Pebble Pedestal Table; FSC: Excludes Pebble Pedestal Table
SPECIFICATION DIMENSIONS Pebble Ottoman Pebble S Ottoman Pebble M Ottoman Pebble L Ottoman Pebble XL Ottoman Pebble XXL Ottoman Pebble 1200 Ottoman (right or left) Pebble 1800 Ottoman (right or left
SPECIFICATION Pebble Ottoman with Back Pebble M Ottoman Pebble L Ottoman Pebble 1200 Ottoman (right or left) Pebble 1800 Ottoman (right or left) Back options Lumbar back cushion optional Tables Short Square Long Small, Medium or Large (to match ottoman) Pebble Pedestal Table Pebble Stainless Steel Table
CONFIGURATIONS SPECIFICATION
CARE & MAINTENANCE SPECIFICATION A great deal of care and experience has gone into the manufacture of Zenith s products. The following will help to prolong the effective life of a product. General Furniture should be inspected regularly for scratches; stains & other damage to ensure repairs are minor & manageable. If you have any queries about product care & maintenance please contact Zenith on 1300 013 013 Solid timber & timber veneer For general cleaning, dust furniture regularly with a soft, damp cloth. Dry with a soft, dry cloth. Do not place hot objects, including cups of tea/ coffee, on timber surfaces as this may damage polish coating. Avoid direct exposure to sunlight, as this will damage timber & polishes. Exposed timber & timber veneer is a natural product & will darken with age & exposure to ultra violet light. Timber edges are extremely vulnerable to impact damage, so please use caution when relocating timber products & when placing timber products next to hard surfaces. Cleaners should be instructed to exercise particular care to protect timber edges from impact from cleaning equipment. Laminate High pressure finishes including High Pressure Laminates, Melamine & matching edge strips. For normal cleaning wipe with a clean cloth & mild detergent/water mix to clean the surface of loose dirt. Monthly maintenance- wipe with a clean cloth using a recommended spray cleaner. Do not use products containing oil, silicon or acid on Laminate or Melamine surfaces. Do not attempt cleaning using an abrasive liquid or harsh cloth that may scratch the surface. Corian & other solid resin Soapy water or ammonia based cleansers will remove most dirt & stains from Corian/solid resin products. To remove water marks wipe with a damp cloth & towel dry. To maintain the Corian/solid resin finishes use a non-abrasive polish & apply with a soft cloth. Avoid exposing Corian/solid resins to strong chemicals, if contact occurs, quickly flush the area with water. Glass Glass edge profiles are very vulnerable to impact; therefore, use caution when positioning glass products. To avoid chips & scratches avoid abutting glass products up against hard surfaces like concrete or other glass products. Chrome plate, powder-coated metal & stainless steel Clean using a damp cloth and mid, cleaning product. Dry with a soft cloth. Do not use any abrasive cleaning agents or cloths. Textiles General Vacuum fabric regularly using an upholstery attachment, and low suction or brush with a firm upholstery brush. Turn & rotate loose cushions regularly. Treat spills and stains as soon as possible. Gently blot spills away with a dry cloth. Do not apply any liquid cleaner to the fabric as this may result in permanent marking. Dry in the shade away from direct heat and sunlight. Allow to dry thoroughly before reuse. Avoid exposure of fabrics & leather to direct sunlight, as this is likely to cause fading & damage. Leather Avoid placing leather in direct sunlight. Keep free of dust and grit. Never use harsh chemicals or acrylic cleaners, solvents or oils. Use leather protection cream 3-4 times a year, following manufacturer s instructions for use. For cleaning use approved leather care product. Note: Under no circumstances must steam cleaning be used to clean upholstery. This may cause damage to the fabrics and/or any water based glues used to stabilise the fabric on the furniture. To remove stubborn stains, seek professional cleaning advice and the advice of the fabric supplier before using any proprietary cleaning systems, including dry cleaning.