BIANCO SENSOR FLUSH MOUNT 15W MODEL # GBCL400HFSR DESCRIPTI & FEATURES With High Frequency Occupancy On/ Off Sensor ; HF System: 5.8GHz±75MHz, ISM wave band Sensor Power consumption : 0.5W(- standby); Sensor Detection zone: Max.(D x H): 30m x 15m DLC 5 year warranty WATTAGE FIXTURE LUMENS: 3000K 15W -1050 4000K 1050 5000K +1050 LIGHT SOURCE LUMENS 1200 EQUIVALENT INCAN- DESCENT WATTAGE INPUT VOLTAGE POWER FACTOR 100W 120-277V 50Hz, PF>0.95 COLOR TEMPERATURE 3000K, 4000K, 5000K SENSOR DETECTI ANGLE SENSOR DETECTI SENSITIVITY HOLD TIME MOTI DETECTI LIFETIME 360 (ceiling) / / / 5s / 30s / 90s / 3min / 20min / 30min 0.5~3m/s 50,000 HOURS PRODUCT TYPE W H 15W 11 1/4 3 CAUTI!! * TO PREVENT ELECTRIC SHOCK, PLEASE MAKE SURE THE POWER IS OFF DURING INSTALLATI *THE LAMP SHOULD BE INSTALLED AND OPERATED BY A QUALIFIED ELECTRICIAN OR TECHNICIAN IN ACCORDANCE WITH THE RELEVANT LOCAL CODES
INSTALLATI INSTRUCTIS LED FLUSH MOUNT FIXTURE 120VAC Input, Dimmable READ AND FILLOW SAFETY INFORMATI Turn off the main power at the circuit breaker before installing and servicing the fixture to prevent possible injury from electric shock. All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician. INSTALLATI & ASSEMBLEY Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions. 1. Pull the supply wires (4 &5) and house ground wire (6) out from the outlet box (1). Thread the fixture screws (8) into the appropriate threaded holes of the outlet box (1). 3. Electrical connections, connect the black fixture black wire (10) to the black supply wire (5) and the white fixture wire (9) to the white supply wire (4) using wire nut (7). 4. Connect the fixture ground wire (11) to the supply ground wire (6) together using wire nut (7). Wrap all wire connections with electrical tape to ensure secure connection. 5. Carefully tuck all wires back into the outlet box. Place the fixture pan (2) over outlet box and feed fixture screws (8) through keyhole slots. Rotate the fixture pan(2) clockwise until screws(8) slid into the narrow end of the keyhole slots and tighten firmly. 6. Final assembly- Attach the lens (3) and rotate clockwise in place securely. 7. Installation complete, restore power at the circuit breaker and turn light switch on to activate this fixture. Dimming- This product is compatible with most common residential type dimmers, dimming performance depends on dimmers. Care and maintenance Use dry and clean cloth to wipe the surface of the fixture. Replacement- This LED product has no bulb to replace. 1.OUTLET BOX (EXCLUDED) 2. FIXTURE PAN 3. LENS 4. WHITE SUPPLY WIRE 5. BLACK SUPPLY WIRE 6. HOUSE GROUND WIRE 7. WIRE NUTS 8. FIXTURE SCREWS 9. WHITE FIXTURE WIRE 10. BLACK FIXTURE WIRE 11. FIXTURE GROUND WIRE
MC602S North America Version / -OFF Function FF O / C US Introduction Automatic switching based on motion and light level. MC602S is an innovative and active motion detector with HF system 5.8GHz. Motion can be detected through Zero-crossing point operation helps protect the sensor plastic, glass and thin non-metal materials. against in-rush current. Super Compact size makes it suitable to fix within most The sensor supplies a simple energy-saving solution to use light only when and where you need it. It luminaires. automatically switches on/off light based on motion and 4-pole press-in terminal (L, N, N, L'), easy assembly. ambient light level. Can control all kinds of lamps, for Detection area, time delay and daylight threshold can example, halogen, fluorescent and LED lights. Compact be precisely set via DIP switch. size and small casing, suitable to fix within most Wide detection area, range up to 20m in diameter. luminaires. 4-pole press-in terminal (L, N, N, L'), very Support higher mounting height 15m Max. easy to install. As it uses the third generation Merrytek technology, normal 5.8GHz microwave module can easily reach high mounting high up to 12m and long detection area 8-9m in radius. 5 K 15m Max.10M Zero-crossing point operation Light Sensor Hold Time 5s~30min Mounting Height 15m Max. Years Guarantee Automatic On/Off 5 Years Guarantee
-OFF Function Motion sensor MC602S + LED driver or ballast (Any brand) MC602S is an innovative motion sensor, switch on the light on detection of movement, and switch off after a hold time when there is no motion detected. As built-in daylight sensor can read brightness value, the sensor does not switch on the light if with sufficient natural light. With sufficient light, the lamp doesn't switch on. 1 2 3 With insufficient ambient light, the sensor switches on the lamp when motion is detected. After hold time, the sensor switches off the lamp when no motion is detected. Wiring scheme Detection Pattern 32 28 24 20 16 12 8 4 0 10% 4 8 12 16 20 2 4 28 3 2 10 8 6 4 2 2 4 6 8 10 4 8 12 16 20 24 28 32 Wall mounting pattern (Unit: m) Ceiling mounting pattern (Unit: m)
MC602S Operating voltage 120~277Vac, 50Hz Rated load HF system 120V@400W;220-240V@800W;277V@1000W 5.8GHz±75MHz, ISM wave band Transmitting power <0.5mW Power consumption 0.5W(standby) Detection zone Max.(D x H): 30m x 15m Detection sensitivity / / / Hold time 5s / 30s / 90s / 3min / 20min / 30min Daylight sensor 5Lux/15Lux/30Lux/50Lux/100Lux/150Lux/Disable Mounting height 15m Max. Motion detection 0.5~3m/s Detection angle 150 (wall installation) 360 (ceiling installation) Operating temperature -20 ~60 IP rating IP20 Setting By selecting the combination on the DIP switch, sensor data can be precisely set for each specific application. Ⅰ Ⅱ Ⅲ 1 2 Detection area Detection area can be reduced by selecting the combination on the DIP switches to fit precisely each application. Ⅰ Ⅱ Ⅲ Ⅴ 3 4 5 5s 30s 90s 3min 20min 30min Hold time Refers to the time period the lamp remains at illumination after no motion detected. 6 7 8 Ⅰ Ⅱ Ⅲ Ⅴ 9 5lux 15lux 30lux 50lux 100lux 150lux Disable Daylight sensor The sensor can be set to only allow the lamp to illuminate below a defined ambient brightness threshold. When set to Disable mode, the daylight sensor will switch on the lamp when motion is detected regardless of ambient light level. 30lux, 50lux,100lux,150lux:twilight operation, 5lux, 15lux: darkness operation only.