WIFI+GSM Wireless Security Alarm System Kit User Manual Model:W20

WIFI+GSM Wireless Security Alarm System Kit User Manual Model:W20

Table of Contents Chapter 1 Foreword... 1 Chapter 2 Features... 2 Chapter 3 Overview of the Host... Chapter 4 Keypad Operation... 3 5 4.1 Power On... 5 4.2 Armed the Host... 5 4.3 Disarmed the Host... 4.4 Home Armed... 4.5 One-button SOS Call... 4.6 Contacts Numbers... 5 5 6 6 4.6.1 How to Add Contacts Numbers 4.6.2 How to Delete Contacts Numbers...... 6 7 4.7 Sensors Management... 8 4.7.1 Remote... 8 4.7.1.1 How to Add Remote... 8 4.7.1.2 How to Delete Remote... 8 4.7.1.3 Edit Remote Sound... 9 4.7.2 Sensor... 9 4.7.2.1 How to Add Sensor... 9 4.7.2.2 How to Delete Sensor... 10 4.7.2.3 Edit Sensor Mode... 10 4.7.2.4 Attribute Mode Chart... 11 4.7.3 RFID... 12 4.7.3.1 How to Add RFID Card... 12 4.7.3.2 How to Delete RFID Card... 12 4.7.3.3 RFID Disarm... 13 4.7.3.4 RFID SMS Notice... 13 4.7.4 Wireless Siren... 13 4.7.4.1 How to Add Wireless Siren... 13 4.7.4.2 Overview of Wireless Siren... 13 4.7.4.3 Add Strobe Siren into System... 14

4.7.4.4 Output with Alarm 4.7.4.5 Wireless Outlet 4.7.5.1 How to Add Smart Socket 4.7.5.2 Overview of Wireless Smart Socket 4.7.5.3 Output with Alarm............... 4.7.5.4 Overview of Wireless Smart Socket... 18 4.7.6 Illegal Arm... 18 4.7.7 Tamper Alarm... 18 4.8 Recording 4.9 Appliance... 18... 19 4.9.1 Outlet Timer 4.9.2 Outlet List... 19... 19 4.10 System... 20 4.11 Phone 4.12 WIFI 4.13 More... 22... 22... 22 4.13.1 Alarm Log(Black Box Function)... 22 4.13.2 About Us... 22 Chapter 5 APP Operation... 22 5.1 Download APP... 22 5.1.1 Register Account... 23 5.2 APP Function Introduction... 26 5.2.1 Setting... 28 5.3 Add and Delete Accessories... 29 5.3.1 Add /Delete Remote... 29 5.3.2 Add /Delete Door/window Sensor 5.3.3 Door/window Sensor Installation...... 31 32 5.3.4 Add /Delete PIR Motion Sensor... 33 5.3.5 PIR Sensor Installation... 35 5.3.6 PIR Sensor Installation Notices... 36 Chapter 6 Specification... Chapter 7 Troubleshooting... 38 39 16 16 16 16 17 Chapter 1-Foreword Thanks for purchasing BIBENE W20 WIFI+GSM alarm system. The system uses 2.4-inch T F T color screen and touch bu ons, embedded powerful CPU control, which it s already paired out of box, customers can directly mount it on when they get it! This alarm system is perfect for homes, factories, schools and other places that need protec on! Customer who wants to add up more sensors and wants to know more, please follow the instruc on. For more informa on or product query, please contact us at: lhxing@hotmail.com 1

Chapter 2-Features Chapter 3-Overview of the Host 2.4-inch TFT color display keypad, simple menu design, easy opera on. Support 2.4G WIFI wireless network, simple and convenient network configura on. Support real- me status feedback, real- me feedback of host status to APP. Super large alarm system: Available to add 99 remotes and sensors, 20 smart sockets. Support WIFI+GSM Instant Push No fica on for Real- me Alert Support RFID armed and disarmed func on, available to add 20 cards. 8 Groups of Auto Arm/ Disarm Se ng(can be set up by days or weeks) Support GPRS networking func on, available to upload the host status to the network alarm system and arm or disarm the system. Equipped with 99 defense zone. Each defense zone has 8 types of defense zones to choose, each zone can be separate control. The host can be used as an ordinary mobile phone and directly dial out the phone set on the host computer. The unique black box feature displays the latest 99 arm and disarm records, 99 recent alarm records, and 99 RFID records. Built-in rechargeable high-capacity lithium ba ery, automa c switching to backup ba ery when out of electricity. 10 seconds message recording func on. Available to record the message in advance, when the alarm was trigger, user can know the loca on of the alarm. Keypad Arm/ Page Up Disarm/Page Down Return Key/Keypad Lock Enter Key/Onebu on SOS Call Menu Key/Delete Key Wired Siren Entrance Power Port ON/OFF Bu on SIM Card Holder 2 3

Icon Descrip on Opera on Chapter 4-Keypad Opera on Arm/ Page Up Disarm/Page Down Return Key/Keypad Lock Menu Key/Delete Key Enter Key/One-bu RFID Sensing Area Contacts Call/SMS/RFID/CID on SOS Call Sensors 99 Sensors and 99 Remotes Addable Recording 10 Seconds Recording Time Appliance Available to add up 20 smart socket System Phone WIFI Configura on MORE Click once to arm or page up Click once to disarm or page down Click once to return/ Long press to lock the keypad Click once to enter/ Long press to access emergency call Click once to enter menu or delete Put your RFID card on this area to disarm the system Emergency Contacts, available to set up 8 contacts, each contacts has 4 contact ways Click to set up the sensor modes and remote and more. Click to record the SOS record, click digit 1 to record, click 2 to play Click to add the smart socket and set up the opera on me Click to set up the delay arm or disarm me and more Click to dial Click to connect WIFI About this product 4.1 Power on Insert the SIM card into the card holder and then insert adapter into the power port. The host will emit Welcome! means successfully power on. 4.2 Armed the Host Remote Opera on: Press the arming bu on on the remote control once. Keyboard Opera on: Click the arming bu on on the keyboard once. Please Note: All sensors in each defense zone will under armed status when you armed the system, if customer wants to separately control the defense zone, please control it on the keypad. 4.3 Disarmed the Host Remote Opera on: Press the disarming bu on on the remote control once. Keyboard Opera on: Click the disarming bu on on the keyboard once. Please Note: All sensors in each defense zone will under disarmed status when you disarmed the system, if customer set up the sensor into emergency mode, the sensor will alert even the system is disarmed. 4.4 Home Armed Remote Opera on: Press the home arming bu on on the remote control once. Keyboard Opera on: Click the arming bu on on the keyboard twice. 4 5

Please Note: Home armed func on is ONLY works for PIR sensors, when under home armed status, PIR sensor will not alert when triggered, but door sensor will s ll alert. 5.Click 6.Click to choose the no fica on receiving choice to determine or delete the choice 4.5 One-bu on SOS Call When emergency happens, press the Emergency bu on on the remote or long press the on the keypad to ac ve the SOS call. 7.Click again to save the phone numbers Please Note: The factory default func on from 1 to 6 contacts are CALL, while 7-8 is CID func on. CID func on CANNOT be used with other three func ons. 4.6 Contacts Numbers Click the menu bu on to enter main menu, click page up/down bu on to choose the Contacts icon, then click enter the page. 4.6.2 How to Delete Contacts Numbers 1.Click to enter Contacts 4.6.1 How to Add Contacts Numbers There are 8 emergency contacts available, please follow the way below to enter the numbers. 1.Click to enter Contacts 2.Click or to page up or down to the number you want to delete or edit 3.Click again to enter ADD/EDIT func on 4.Page down to Delete then click to delete the number 5.Page down to All Delete you can delete all the contacts numbers 2.Click again to enter the phone call digits 3.Input the telephone numbers (Click * to enter *, long press to enter #) 4.Click to delete if enter wrong number 6 7

4.7 Sensors Click the menu bu on to enter main menu, click page up/down bu on to choose the Sensors icon, then click enter the page. 4.7.1 How to Add Remote There are 99 remote zones, each is allows to add ONE remote. Customer can input exact digit number on the pad for quick se ng. For example: If you wan to control 98 remote zone, click 9 and 8 on the pad, then it will go to 98 zone. 1. Click to enter Sensors 2. Click to choose Remote 3. Click again to Add/ Edit or Delete choose Remote 4. Click to enter remote adding page 5. Trigger the remote by press any bu on of it 6. System will emit Successfully Programmed 7. Click or to set up the Sound and the Remote Sound 4.7.1.3 Edit Remote Sound Func on Opera on ON/OFF Status Screen Sound (Must Added Wireless Siren) Panel Sound (Must Added Wireless Siren) 1. ON 2. OFF 1. ON 2. OFF Wireless Siren will/ will not emit an alarm when arm/ disarm on the remote. Wireless Siren will/ will not emit an alarm when arm/ disarm on the panel. 4.7.1.2 How to Delete Remotes Delete One Sensor. When entering Remote Control Page, page down or up bu on to find out the Zone you want to control. Or you can input the digit on the keypad to find out the zone in a second. Then Click, a window will pop out, you can delete the remote on this zone. Delete All Sensors. When entering Remote Control Page, page down or up bu on to go to the the bo om of the sensors zone. Delete All to delete all remotes. 4.7.2 Sensor 4.7.2.1 How to Add Sensor There are 99 sensor zones, each is allows to add ONE sensor. Customer can input exact digit number on the pad for quick se ng. For example. If you wan to control 98 zone, 9 and 8 on the pad, then it will go to 98 zone. 1. Click to enter Sensors 2. Click to choose Sensor 3. Click or to choose sensor zone 4. Click to enter sensor adding page 5. Trigger the sensor by separate the magnet and the stripe 6. System will emit Successfully Programmed 7. Click or to set up the sensor sound 8 9

4.7.2.4 A ribute Mode A ribute Descrip on 4.7.2.2 How to Delete Sensor Delete One Sensor. When entering Sensor Control Page, click page down or up bu on to find out the Zone you want to control. Or you can input the digit on the keypad to find out the zone in a second. Then Click, a window will pop out, you can delete the sensor on this zone. Delete All Sensors. When entering Sensor Control Page, click page down or up bu on to go to the bo om of the sensors zone. Click Delete All to delete all sensors. Instant Home Smart Emergency Arm/ Home Arm: Panel send alarm no fica on when triggered. Disarm: Panel will not send alarm no fica on when triggered. Arm/ Home Arm: No no fica on when PIR sensor is triggered; There is no fica on, when door sensor is ac vated. Arm/ Home Arm: When sensors are ac vated once, panel will not send alarm no fica on. It will send no fica on at the second me alarm is triggered (around 30s a er the first trigger) The purpose for this property will reduce false alarm. Panel will send alarm no fica on whatever system is under Arm or Disarm status. 4.7.2.3 Edit Sensor Mode Function Operation ON/OFF Status Siren 1. ON 2. OFF Wireless Siren will/will not emit an alarm when the sensor was triggered. A ribute Event Code Entry Delay(s) 1. Instant 2. Home 3. Smart 4. Emergency 5. Disable 6. Doorbell 7. Chime 8. Medical 1. Ambulance 2. Fire 3. Panic 4. Silent 5. Burglar 6. Perimiter 7.Gas Click to enter delay me Each mode will emit different alarm. (Below will elaborate each mode) ONLY works for special alarm pla orm. (Like CID) Will not affect normal usage. Longest delay me: 255 seconds ONLY works for 1-10 Zones Disable Doorbell Chime Medical Panel will not send alarm no fica on whatever system under Arm or Disarm status. Whatever system is under Arm or Disarm status, when sensors are ac vated, panel will goes off "Ding Dong" ring. You can treat it as doorbell for this func on. Panel under disarmed state: when sensors are triggered, panel will goes off "Welcome" voice; Panel under armed state: when sensors are triggered, panel will goes off ordinary alarm ring. Panel will send alarm no fica on whatever system under Arm or Disarm status. It's be er to setup this property for elder or pa ent zone. 10 11

4.7.3 RFID 4.7.3.1 How to Add RFID Card There are 20 RFID cards addable, each RFID zone can only add one card. RFID card can be used to disarm your system. 1. Click to enter Sensors 2. Click to choose RFID 3. Click again to Add/ Edit or Delete choose RFID 4. Click to enter RFID card adding page 5. Trigger the RFID card by pu ng it on RFID zone on the panel 6. Panel will shows Added when successfully added. Configured or Need Not Add means the card has added to other zone. 7.Click or to set up the func on of this RFID card. 4.7.3.3 RFID Disarm RFID Disarm ON: Customer can disarm the system by using this RFID card. 4.7.3.4 RFID SMS No ce RFID SMS No ce ON: Customer will receive the message 01 back home when using RFID card to disarm the system. 4.7.4 Wireless Siren 4.7.4.1 How to Add Wireless Siren(Not included) 4.7.4.2 Overview of Wireless Siren J009 wireless strobe siren is a plug &play wireless home security solu on. Not only can work as accessory but also as standalone alarm panel.when an alarm is triggered, it will make warning sound and strobe light will flash to deter intruders. It s suitable for wireless alarm systems,working frequency at 433MHz. (Sell separately on our store) 4.7.3.2 How to Delete RFID Card Delete One RFID Card. When entering RFID Control Page, click page down or up bu on to find out the Zone you want to control. Then click, a window will pop out, you can delete the RFID card on this zone. Delete All RFID Cards. When entering RFID Control Page, page down or up bu on to go to the the bo om of the sensors zone. Click Delete All to delete all RFID Cards. 12 13

Set Bu on For pairing with accessories or panel, adjust siren volume, and restore to factory se ng. Switch On/Off Bu on For DC power on/ off. Plug the siren into a power outlet,siren beeps once and power light flash once, indica ng power on successfully; Then, toggle switch bu on to "on", keep siren in charging at the same me Power Light For charging status,when power light change from red to green, indica ng full charge; Built-in ba ery support around 8 hours stand by working a er power outage. Strobe Light Strobe light will flash to deter intruders Total Clear Long press the SET bu on and plug it into the socket, you will hear 10 beeping and flashing, release the set bu on un l the beeping and the flashing stop, and the light will stop. 2) Click to turn on the Wireless Siren on the panel and send signals. 3) The Wireless siren will beep three mes means successfully configured. Siren and Strobe Light: Status Strobe Light Arm Beep Once and Flash Once Disarm Beep Twice and Flash Twice 4.7.4.3 Add Strobe Siren into System 1) Press SET bu on on siren and hold for 3s, beep once,led light in siren will be on and enter into pairing mode. PLEASE NOTE: Customers are available to add limitless wireless siren into this system, but this system only has one entrance to add wireless siren and each siren CANNOT control separately, when the sensor is triggered, all sirens will alarm it also connect to the sensor siren se ng, please check the following chart: 14 15

Wireless Siren Sensor Siren Bu on Alarm Status ON ALL Siren Alarm ON OFF Sensor Zone with Siren ON will Alarm Sensor Zone with Siren OFF will NOT Alarm OFF OFF ON NO Siren Alarm Sensor Zone with Siren ON will Alarm Sensor Zone with Siren OFF will NOT Alarm 4.7.5.3 Add Smart Socket into System 1) Plug the socket in and then press SET bu on on socket and hold for 5s, LED light will TURN OFF and pairing mode. 4.7.4.4 Output with Alarm Click to turn on the bu on, when the system was triggered, the wireless siren will alarm, we suggest our customer to turn it on. 4.7.5 Wireless Outlet 4.7.5.1 How to Add Smart Socket (Not included) 4.7.5.2 Overview of Wireless Smart Socket S71 adopts interna onal advanced digital RF technology and is with stable performance, very stable memory and storage capability and intelligent studying func on, Compa ble with remote control of full range of protocol 1527/2262 with frequency 433,92 M H z, capable to study 60pcs remote control. (Sell separately on our store) 2) Click to turn on the Wireless Outlet on the panel and send signals. 3) The socket will flash twice means successfully added into the system. Please Note: If you cannot add the socket into the system, please total clear the socket by press the se ng bu on and the plug it in, the LED light will flash from slow to fast, release the bu on when the flash stop, and then press the bu on for 5 seconds and enter pairing mode. 16 17

4.7.5.3 Output with Alarm Output with Alarm Status Socket Status ON OFF Panel was armed and triggered Smart Socket will AUTO cut off when disarmed the system for safety Smart Socket will NOT cut off 4.7.6 Illegal Arm Click to turn on this func on, when it is on, customer CANNOT armed the system if one of the sensor is opened. The system will emit 01 Zone Error to remind you to check the sensor and un l all the sensor is correctly set up, customer can armed the system, which greatly enhance the home safety. ONLY works for an -tamper sensor, D025 is not an an -tamper sensor. 4.7.7 Tamper Alarm Click to turn on this func on, when this func on is on, system will send the message to inform you if the sensor is tampered. ONLY works for an -tamper sensor, D025 is not an an -tamper sensor. 4.9 Appliance 4.9.1 Outlet List Available to add 20 smart sockets, please check 4.7.5.1 How to Add Smart Socket to figure out the adding process. Please Note: The difference between this func on and 4.7.5 Wireless Outlet is the Wireless Outlet from Sensor part is the Main Switch while others in this part are sub-switch. If the sub-switch is on, socket will work even the main switch is turn off. Meanwhile, if the main switch is off, the socket in sub-switch will work but WILL NOT auto cut off when disarmed. 4.9.2 Outlet Timer There are 8 groups of outlet mers. Customer can set up auto on or off me by days and weeks. 4.8 Recording Available to record 10 seconds SOS record, when the system is intruded, it can call the reset number and play the SOS record. We recommend our customer to record their address as for emergency. 18 19

Time Operate Enter digit to enter the me Click to choose Auto ON/OFF Key Tone Enter to turn on or off the key pad clicking tone. Week Click to choose the auto on or off day Screen-saver Enter to choose the screen save me. 30s/60s/2min/5min/10min/Never Outlet Enter the digit to control exact socket, max input digit is 20 Language Simplify Chinese/English/German/ Italian/Russian/Spanish 4.10 System Click page up or down or enter digit 5 on the keypad to enter system control pages. Delay Auto Arm/Disarm Date& Time Volume Siren&Ring GPRS Setup the Arming delay me and Entry delay me, each me are available to set up from 1-255 seconds. Setup the the auto arm or disarm me by days or week. 8 groups available. Auto update to the real me. Customer can also change it by entering the me. Change the Voice Volume and the Alarm Volume, available change from level 1-9. Siren Time: Available change from 0-20 minutes. 0 means no siren when the system is triggered. GSM Ring: Available change from 0-20 mes. GSM ring means the panel will wait for exact rings me then pick up the phone. Opening func on, not available yet. Security Contact ID Arm/Disarm SMS SMS Reply Wallpaper Power Failure Se ng Restore Factory Defaults Set up password of the keypad or lock the keypad. Default Password: 123456 (ONLY available to set up in digits) NOTE: When locked the panel, customer should enter password before any opera on. Set up the CID code. Opening func on, not available yet. Set up to receive the SMS no ce Panel will reply to you phone when you using phone to control the panel. Four Choices Set up the no fica on recep on way when the panel is on low ba ery or power off. Voice/Siren/SMS/Call Enter to restore the system into factory defaults 20 21

4.11 Phone Enter the phone digit on the keypad to make the phone call. (Need to work by inser ng the SIM card.) 4.12 WIFI Please use W20 APP to connect to WIFI. 4.13 More 4.13.1 Alarm Log(Black Box Func on) Auto record 99 mes Arm/Disarm history, 35 mes of Alarm history, 12 mes of RFID history. IOS Android Warm Tips:Tap "Allow" to allow receiving no fica on from "W20" W20 4.13.2 About Us This page shows the MAC number of the machine and other informa on. Scan the Qr code to download our APP or search W20 on APP store. 5.1.1Register Account Register one account if you are first to use the app. Type into Email and password,then click "Confirm", register finished. You can share your login account with your family members. Chapter 5-APP Opera on 5.1 Download APP Scan the QR code or search "W20" in App Store to download and install it. 22 23

5.1.2Wi-Fi Configura on Step 1: Connect W20 control panel with power socket,the panel will be power on automa cally and emit "Welcome". Step3: A er account registra on,enter into device list,click + to choose "W20" device, then input Wi-Fi password, click "NEXT STEP to go to configura on page. APP will start the 60 seconds of countdown. Step2: Make sure that your smart phone is connected to your WIFI network. Step4: Make sure your W20 has access to power in this step, and go to WIFI session on the panel, press 1 to enter WIFI configura on process. PLEASE NOTE:W20 doesn't support WIFI of 5Ghz band. If you use dual-band (5Ghz and 2.4Ghz) router, please make sure to connect this system with the 2.4Ghz instead of the 5Ghz. 24 25

Step5: When 60s countdown finished, the panel will show on the L A N U N B O U N D D E V I C E. Then click the L A N U N B O U N D DEVICE to bound it into ONLINE DEVICE. Icon Descrip on Back to device list or user management. Tap "Se ng" for alarm panel se ngs Tap Arm icon, the sensors synchronized with the alarm panel will be armed. Tap "Disarm" icon, the sensors synchronized with alarm panel will be disarmed. Tap "Home arm" icon, the sensors synchronized with alarm panel will be home armed. Panel ba ery volume display. Tap "Outlets" icon to add or delete outlets. 5.2 APP Func on Introduc on Tap "Contacts" icon to add or delete contacts. Tap "Auto Switch" icon to edit auto on/off me of the outlets Tap Arm Timing icon to set up the auto Arm/ Disarm me. Tap Arm Delay icon to set up the delay me from 0-255 seconds. Tap Push No fica on icon to receive no fica on. Tap Alarm Time icon to set up the alarm me from 1 to 20 mes. Tap Alarm Delay icon to set up the alarm delay me from 0-255 seconds. 26 27

5.2.1 Se ng Click for more se ng. Lock Key Remote Num Turn on/off to lock/unlock the panel Add or delete remotes and set up zones. Sensor Num Add or delete sensors and set up zones. Zone Type Set up the zone type of each sensor zone. Arm SMS Receive the SMS when arm/disarm/home arm Arm CID Receive CID no fica on when arm/disarm/home arm Push No fica on Tap Push No fica on icon to receive no fica on. Icon Descrip on Network Se ngs Check network status Password Click to change the admin password. User Password Click to change the user password. Device Volume Change from level 1-9 Push Text Edit the text content of the no fica on Volume Change alarm volume from level 1-9 Push Sound Edit the push sound when arm/disarm/home arm Ringer Num Set up the ring mes from 1-20 mes Siren Reply SMS Reply Turn on/off the siren when system was triggered Turn on/off the reply send to the phone Turn on/off the SMS reply send to the phone 5.3 Add and Delete Accessories 5.3.1 Add /Delete Remote Important: Please keep panel under "Disarm" status when you add accessories. 28 29

Rc352 remote control is delicate and easy to carry. It can be a ached to your key ring, or put into your pockets or purses. When you are about to exit or enter the house, you can use the remote control to arm or disarm the system. Or press SOS bu on to ac vate the alarm immediately. Overview 5.3.2 Add /Delete Door/window Sensor The contact sensor contains a transmi er and a magnet,which can be mounted on a door, window or any entry places can be opened or closed. When the transmi er and magnet are separated, the contact sensor will send a signal to the control panel and the panel will trigger an alarm. 2. Tap "Remotes Num" to enter adding remote page. Click Add, then the main panel will emit Add 01 Zone, then click any bu on on the remote, the main panel will emit Add successfully programmed. The APP will show 1 on Have Remote Numbers. Click Delete to delete remotes. Please Note: Each Zone is ONLY AVAILABLE TO ADD UP 1 REMOTE. Customer can choose other zone to add remote. 1. There are triangle marks on the side of the transmi er and magnet. Make sure the triangle marks is close to each other at the first step. 30 31

2. Tap "Sensor Num" to enter adding remote page. Click Add, then the main panel will emit Add 01 Zone, then separate the magnet from transmi er around 2cm, LED light in transmi er will flash in Red. The main panel will emit Add successfully programmed. The APP will show 1 on Have Sensor Numbers. Click Delete to delete remotes. Please Note: Each Zone is ONLY AVAILABLE TO ADD UP 1 Sensor. Customer can choose other zone to add remote. 5.3.3 Door/window Sensor Installa on Make sure the contact works properly before installing it. There are triangle marks on the side of the transmi er and magnet. Make sure the triangle marks is close to each other. Once the transmi er and magnet is separated around 2cm by intruder,the LED light in transmi er will flash in Red. Alarm will be ac vated. Paste the transmi er and magnet on doors and windows or any other open/close places with provided double-sided tapes. 5.3.4 Add /Delete PIR Mo on Sensor 1. With intelligent processing technology, the detector can detect infrared rays released from human body, and iden fy interfering signals and human movement signals, thus preven ng false alarm.being able to detect human movement within 8m space, suitable for installa on in any place of your house that can't be cover by contact access sensor,without opening door or window. 32 33

Overview 5.3.5 PIR Sensor Installa on Make sure the PIR Sensor works properly before installing it. 1. Choose a suitable place for installa on. Detec on Lens LED Indicator 3. Tap "Sensor Num" to enter adding remote page. Click Add, then the main panel will emit Add 01 Zone, then wave your hand before the mo on sensor to trigger the sensor, LED light of the sensor will flash in Red. The main panel will emit Add successfully programmed. The APP will show 1 on Have Sensor Numbers. Click Delete to delete remotes. Please Note: Each Zone is ONLY AVAILABLE TO ADD UP 1 Sensor. Customer can choose other zone to add remote. 2. Fix the PIR sensor Fix the installa on bracket on the wall with screws, then fit the groove at the back of the sensor on the bracket. You can adjust bracket angle to achieve the best detec on effect. 34 35

3. Mount the PIR sensor in proper angle. It's recommended to mount it at height of 2.2m from ground, and to be installed indoors in a corner as far as possible in order to obtain the ideal detec on range. The sensi vity is op mal when the walk direc on is ver cal to the infrared direc on. Choose the best loca on and angle according to the actual situa on. 2. Avoid infrared detectors facing to or close to heat/cold sources; Heat/Cold sources, such as heaters, air condi oner, microwave oven which may cause false triggering. 5.3.6 PIR Sensor Installa on No ces Please pay a en on on below issues when installa on: 1. Avoid infrared detectors facing to glass windows or doors; Strong light will interferes with detec on sensi vity. What's more, complicated situa on such as traffic flow,stream of people also should be avoided. 36 37

3. Avoid two PIR sensors placed in the same space. There will be interference phenomenon caused by trigger at the same me if several sensors installed in same place. Chapter 7-Troubleshoo ng Situa on Reason Troubleshoo ng 1.No telephone call when alarm 1. Disarmed Did not set up the contact number 1. Armed the system 2. Add the contact number again 4.Avoid installing infrared detector at outside, and it's only for indoor use. 3.Cannot read the SIM card or no phone call when alarm 4.No record when receiving the phone call 1. No SIM card 2. SIM card has PIN code 3. Bad GSM signal 4. SIM was broken 5. Did not set up the call func on 6. Did not set up the SMS func on 1.Did not set up the record 1. Insert SIM card 2. Cancel PIN code 3. Move to open area for be er signal 4. Change a new SIM card 5. Set up Call func on 6. Set up SMS func on 1.Set up the record Chapter 6-Specifica on Input Voltage: DC 5V Standby Current: < 50ma. Alarm Current: < 450ma. Wireless Frequency: 433Mhz. GSM System: Support Gsm850/900/1800 /1900Mhz. Backup Ba ery: 3.7 Large-Capacity Lithium Ba ery. Alarm Loudness: 80Db(Built-In Alarm) Accessory Parameters: This alarm is equipped with EV1527 code detector. When using EV1527 code, the oscilla on resistance is recommended to use 150k-470k. 5.Remote doesn t work 6.PIR Sensor doesn t work 1. Failed to add into the system 2. Low ba ery Wrong ba ery installa on or rust 1. Failed to add into the system 2. Low ba ery Wrong ba ery installa on or rust 1. Add it again to the system 2. Change to the new ba ery 3. Clean the rust 1. Add it again to the system 2. Change to the new ba ery 3. Clean the rust 38 39