T.T.E. ENGINEERING (M) SDN. BHD. (TAKASAGO THERMAL ENGINEERING CO LTD) COMPANY INTRODUCTION (64160-K)
CONTENT 01. COMPANY INFORMATION 02. QUALITY ASSURANCE 03. ENGINEERING ABILITIES (In House) 04. SAFETY ASSURANCE 05. PROJECT REFERENCE 06. PREVIOUS PROJECT HIGHLIGHTS & EXPERIENCES 07. CORPORATE SOCIAL RESPONSIBILITY (CSR)
COMPANY OUTLINE (JAPAN HEADQUARTERS) Headquarters Name Co., Ltd. Chairman and Representative Director CEO Atsushi Ouchi Established November 16, 1923 Net Sales 260,204 Million Yen (as of March 31, 2017, consolidated) Stock Listing First Section Of The Tokyo Stock Exchange Number of Employees 2,010 (as of April 1, 2017)
TOP MESSAGE Providing Solutions to Contribute Professionally to Global Environmental Conservation MANAGEMENT POLICY Contribution to society through personal harmony and creativity MANAGEMENT PRINCIPLES 1 To serve society through the development of business activities that focus on the creation of the best product quality 2 To develop technology that serves our customers needs and utilizes the creativity of all employees 3 To enhance personal character and harmony between people by nurturing talent and promoting mutual respect Chairman and Representative Director, CEO Atsushi Ouchi
COMPANY INFORMATION - SERVICES T.T.E. Engineering (M) Sdn. Bhd. is an One Stop Services Provider (Supply, Install, test & Commission) as per scope listed below:- Mechanical system include air-condition system, fire protection system and ventilation system Electrical System included high voltage supply, low voltage supply & extra low voltage system. Process System included process cooling water, compressed dry air system, process exhaust system, steam supply system, process vacuum system, chemical supply system & others. Clean Room System included industrial cleanroom, pharmaceutical cleanroom, hospital control zone & others.
COMPANY INFORMATION T.T.E. Engineering (M) Sdn Bhd has established since 1982 in Malaysia. It is involved in project execution, supply, installation, maintenance & other related works for industrial heating, ventilation, air-conditioning (HVAC), electrical, utility process & cleanroom system. Its Parent Company Co. Ltd. Japan has shared & instilled its over 90 years experiences & technologies in the industrial to cater for the needs in Malaysia. It incorporated Japanese ways of productive work styles, management & thinking into the company operation. T.T.E. Engineering (M) Sdn Bhd has more than 100 engineers as at today. Its functions in Malaysia as part of its parent company Takasago Thermal Engineering Co. Ltd. s worldwide network with full back-up measures & involvement. T.T.E Engineering (M) Sdn Bhd is a registered grade G7 company under Construction Industry Development Board Malaysia (CIDB) and MS ISO 9001:2008 certified company since 1996.
COMPANY INFORMATION Headquarters : Co. Ltd. Japan Year established : 1923 Yearly turnover : > USD 2 billion Direct employee : > 1,600 persons Others : Listed in Tokyo Stock Exchange Local establishment : T.T.E. Engineering (M) Sdn. Bhd. (64160-K) Year established : 11-Nov-1980 Local direct employee : > 100 persons Authorized capital : RM 2,000,000.00 Paid up capital : RM 1,000,000.00 Yearly turnover : > RM 100 mil
INTERNATIONAL BUSINESS NETWORK
COMPANY INFORMATION Malaysia Network 4 PENANG OFFICE 5 KULIM OFFICE Unit 11, Lower Level 5, Hotel Equatorial Penang, No.1, Jalan Bukit Jambul, 11900 Pulau Pinang. TEL: 604 643 9703 FAX:604-643 8733 No.35, Tingkat Bawah & Satu, Persiaran 7, Kulim Avenue, Kulim Hi-Tech Park, 09000 Kulim, Kedah Darul Aman. TEL: 604 492 4426 FAX: 604-492 4428 GENERAL ENQUIRY : enquiry@tte-net.com 6 BATU KAWAN OFFICE 4 6 5 No.1, 1 st & 2 nd Floor, Lorong Bagan Tambun, Taman Bagan Tambun, 14100 Simpang Ampat, Pulau Pinang. TEL: 604 505 7998 fax: 604-505 7738 1 7 KUCHING OFFICE 2 1 st Floor, SL4, Lot 9659, 2 nd Precinct, Jalan Setia Raja, 93350 Kuching, Sarawak. 3 7 TEL: 6082 461 408 FAX: 6082-455 346 1 PJ OFFICE (HEAD OFFICE) 2 MELAKA OFFICE 3 JOHOR BAHRU OFFICE 13 th Floor, Menara Choy Fook On, No.1B, Jalan Yong Shook Lin, Section 7, 46050 Petaling Jaya, Selangor Darul Ehsan. TEL: 603 7955 5972 FAX: 603-7955 4370 No.7-A, Jalan Melaka Baru 22, Taman Melaka Baru, Batu Berendam, 75350 Melaka. TEL: 606 317 5406 FAX:606-317 5423 No.2-01 & 2-02, Jalan Molek 1/10, Taman Molek, 81100 Johor Bahru, Johor Darul Takzim. TEL: 607 354 1139 FAX: 607-359 1128
CONTACTS US Homepage : www.ttemalaysia.com.my Head Office : Tel : 603-7955 5972, 7955 5472, 7955 5281 Fax : 603-7955 4370 Mr. Shigeaki Takehara. email: shigeaki_takehara@tte-net.com Northern Office: Tel : 604-643 9703, 643 2857, 642 3984 Fax : 604-643 8733 & East Mr. Norio Imaizumi. email: norio_imaizumi@tte-net.com Southern Office: Tel : 607-3541139 Fax : 607-359 1128 Mr. Keita Katagiri. email: keita_katagiri@tte-net.com Marketing Team Head Office : Southern Malaysia : East Malaysia : Northern Malaysia : Mr. BC Heng. HP: 0 12-378 9282. email: hengbc@tte-net.com Mr. KP Loh HP: 019-311 6452. email: kploh@tte-net.com Mr. Petrus Ting HP: 012-888 1595 email: petrus@tte-net.com Mr. KP. Tan HP: 012-400 6001 email: kptan@tte-net.com
COMPANY INFORMATION Organization Chart Co., Limited, Japan T.T.E. Engineering (M) Sdn. Bhd. Managing Director : Mr. K. Asano D. Managing Director : Mr. YT Lee Project Execution Dept. Administrative Dept. Office Northern Malaysia Operation Mr. Imaizumi (G.GM) Mr. TK Lim (GM) c/w 60 persons Technical staffs Central, South & East Malaysia Operation Mr. Takehara (G.GM) Mr. Katageri (G.GM) Mr. WM Chiew(GM) c/w 55 persons Technical staffs Marketing Department Mr. BC Heng ISO & Safety Department Mr. Taharaguchi/Mr. Sonny Gay QA/QC/Design Department Mr. Hirota/ Mr. CK Yap Procurement Department Mr. Eric Chong/ Ms. PF Oh Technical Admin. Department Mr. Miura/ Mr. ST Tan HR Dept.- Ms. LY Han Account / Finance Dept.- Ms. HF Ng Total Head Count : 150 persons Japanese : 11 Persons Technical staffs ; 127 persons Account/admin : 12 persons
COMPANY INFORMATION CIDB AND ISO CIDB GRADE, CATEGORIES & SPECIALIZATION G7 B04 Building Construction Works G7 CE21 Construction Of Civil Engineering G7 M01 Air Conditioning & Ventilation System G7 M15 Various Mechanical Equipment QUALITY MANAGEMENT SYSTEM (ISO 9001:2008) Design, Installation and Maintenance of Clean Room Systems, General Air-Conditioning, Ventilation And Exhaust Systems And Utilities.
QUALITY ASSURANCE - QUALITY POLICY We are committed to consistently Maintain and continuous Improve Our Management Quality CUSTOMER SATISFICATION ON-TIME DELIVERY EXCELLENT QUALITY
QUALITY ASSURANCE - QUALITY POLICY 1. Excellent Quality 2. On-Time Delivery 3. Customer Satisfaction We shall work as a team to maintain constantly and improve continually our management quality using ISO 9001:2008 Quality Management System as a management tool.
QUALITY ASSURANCE PROJECT QUALITY PLAN Project Brief Quality Objectives Internal Quality Audit Responsibility & Organization Design & Development Purchasing & Suppliers Control Safety Control Risk Assessment Schedule Control Quality Operation Plan Document Control Customer Satisfaction Monitoring
ENGINEERING ABILITIES DRAWINGS & MODELLINGS
ENGINEERING ABILITIES 1.VISUAL 2.VIRTUAL 3.ACTUAL 1 2 3
SAFETY ASSURANCE SAFETY POLICY TTE Engineering (M) Sdn. Bhd. is committed to providing a safe and healthy working environment in particular, Complying with the Factories And Machinery Act 1967 and The Occupational Safety And Health Act 1994 and other relevant statutory requirements and codes practices Preventing OSH related fatalities, injuries and illnesses through effective safety and health management and implementation of safe work procedures Maintaining high level of safety awareness through continuous education and training relating to safety and health. Our ultimate aim is to develop a safety and health culture amongst our employees Encouraging employees to report any unsafe acts, unsafe conditions, any accidents or near misses to management promptly Conducting regular inspection and taking appropriate corrective action Providing appropriate personal protective equipment To realize the above, the management will be proactive, fully committed and supportive of all safety and health activities within the company. The management will review consistently this safety and health policy, to ensure that it remains relevant and appropriate for safe execution of the works at all times.
SAFETY ASSURANCE ENVIRONMENTAL, HEALTH & SAFETY (EHS) PLAN Objectives To ensure the goal of EHS Zero accident is achieved To ensure all Environmental, Health & Safety legislations are complied To determine the EHS issues and manage all risks Involved Method Planning Study the work program to ensure EHS matters are incorporated Tasks analysis by study the construction drawings to enhance EHS requirements. Prepare a plan to include the following :- Method Statement Safety Focus Activity, JHA & CIPP Safe Working Plans, checklists and permits Execution Educate workers on the EHS regulation Zero tolerance concept To Enhance environmental monitoring EHS compliance EHS issues are calibrated through meetings and trainings Control EHS staffs competency and qualification Ensure all personnel is CIDB and NIOSH compliance at site. Ensure all EHS matters is complied.
SAFETY ASSURANCE EHS PLAN A B A B INGRESS & EGRESS CONTROL FIRST AID TRAINING C C TOOL BOX MEETING
SAFETY ASSURANCE ACCREDITION
Melaka Selangor Penang & Kulim PROJECT REFERENCE LIST - 2015 OWNER Intel Technology Osram Opto Semiconductors ATOTECH Ibiden Electronics Malaysia Showa Denko HD SCOPE Retrofit Mechanical Mechanical Mechanical & Electrical & Utilities Mechanical & Utilities & Clean Room OWNER Panasonic Air Conditioning Oji Asia Household Product Mitsui Outlet Park GS Paper & Packaging Denso Akashi Kikai Industry SCOPE Mechanical Mechanical & Utilities Mechanical & Electrical Civil Structure & Architecture Mechanical & Electrical & Clean Room Mechanical & Electrical & Utilities OWNER Konica Minolta SCOPE Mechanical & Electrical
Johor Melaka Selangor Penang & Kulim PROJECT REFERENCE LIST - 2016 OWNER B-Braun Integrated Device Technology Ibiden Electronics Malaysia Hoya Electronics Osram Opto Semiconductors OWNER Tasco Ortustech Denso Bemis Asia Pacific Sdn. Bhd. SCOPE Mechanical & Electrical Mechanical & Clean Room Mechanical & Electrical & Utilities Mechanical & Electrical & Clean Room Civil Structure & Architecture Mechanical & Electrical Utilities & Clean Room SCOPE Mechanical & Electrical & Utilities Mechanical & Electrical & Clean Room Mechanical & Electrical & Clean Room Mechanical & Electrical & Clean Room OWNER Konica Minolta SCOPE Mechanical & Electrical AEON IKEA OWNER Mechanical SCOPE Mechanical & Electrical
Kuching Johor Melaka Selangor Penang & Kulim PROJECT REFERENCE LIST - 2017 OWNER B-Braun Ibiden Electronics Malaysia Osram Opto Semiconductors OWNER Ortustech Bemis Asia Pacific Sdn. Bhd. Denso Tasco SCOPE Mechanical & Electrical Mechanical & Electrical & Utilities Civil Structure & Architecture Mechanical & Electrical Utilities & Clean Room SCOPE Utilities CSA, M & E, Utilities & Clean Room Mechanical & Electrical & Utilities Mechanical & Electrical & Utilities OWNER Xepa-Soul Pattinson Konica Minolta OWNER IKEA SCOPE HVAC Mechanical & Electrical SCOPE Mechanical, Electrical & Plumbing OWNER HGST Malaysia Mechanical SCOPE
PROJECT HIGHLIGHTS Land area : 24.67 acre Building area: 59,900 m2 Main product: LED wafer Construction period: 2016 ~ 2017 (Ph1), 2017 ~ 2018 (Ph2) One of the Leading Wafer Factory@Kulim Hi-Tech Park, Kedah Darul Aman, Malaysia Land area : 15.93 acre Building area : 102,000 m2 Main product : Commercial Construction period : 2016 ~ 2017 One of the Branded Shopping Mall @Johor, Malaysia Land area Building area Main product Construction period : 228,000 m2 : 120,000 m2 : PWB : 2008 (Ph1), 2012(Ph2)~2014 One of the Leading PCB Factory@Penang Science Park Penang. Land area : 20,600 m 2 Building area : 1,100 m 2 Main product : Consumable medicine, antibiotic Construction period : 2011 One of the Leading Pharmaceutical Plant@Sungai Petani, Kedah Darul Aman, Malaysia
PROJECT HIGHLIGHTS Land area : 72,000 m 2 Building area : 34,000 m 2 Main product : Connectors Construction period : 2012~2013 One of the Leading Semiconductor Factory@Johore Baru, Malaysia Land area : 62,600 m 2 Building area : 37,500 m 2 Main product : Automotive Construction period : 2013 One of the Leading Utility Devices Factory@Bangi, Malaysia Land area : 67,000 m 2 Building area : 24,000 m 2 Main product : HINO Lorry Construction period : 2013 One of the Leading Motor Factory@Seremban, Malaysia Land area : 125,000 m 2 Building area : 60,000 m 2 Main product : Solar panel Construction period : 2012~2013 One of the Leading Solar Panel Factory@Kulim Hi-Tech Park, Kedah Darul Aman, Malaysia
PROJECT HIGHLIGHTS Land area : 13,300 m 2 Extension area : 3,760 m 2 Main product : Welding rod Construction period : 2013~2014 (Ph1) One of the Devices Utility Factory@Prai, Penang, Malaysia Land area : 20,800 m 2 Extension area : 13,000 m 2 Main product : Drink Beverage Construction period : 2013~2014 One of the Food Factory@Senai, Johore, Malaysia Land area : 104,000 m 2 Building area : 82,000 m 2 (B5, B8, B9 & B11) Main product : Pharmaceutical instrument Construction period : 2013 ~ 2018 One of the Leading Pharmaceutical Factory@Penang, Malaysia
PROJECT HIGHLIGHTS Land area : 100,000 m 2 Building area : 40,000 m 2 Main product : Shopping Mall Construction period : 2014~2015 One of the Branded Shopping Mall@KLIA, Sepang, Malaysia Land area : 100,000 m 2 Building area : 17,000 Main product : Printer Tonner Construction period : 2014~2015 One of the Tonner Producer Facory @Ayer Keroh, Malaysia Land area : 85,000 m 2 Building area : 30,000 m 2 Main product : Shopping Mall Construction period : 2014~2015 One of the Shooping Mall@Kempas, Johor, Malaysia
PROJECT HIGHLIGHTS ACMV SETUP Centrifugal chiller Condenser water pump MAU & AHU Chilled water pump Cooling tower
PROJECT HIGHLIGHTS PROCESS UTILITIES SYSTEM CDA system Scrubber system Process cooling water Process vacuum Process exhaust system
PROJECT HIGHLIGHTS SEMICONDUCTOR CLEAN ROOM Experience: Class 1, 10, 100, 1k, 10k and 100k clean room design and build capability Clean room that suit to customer needs Class 100 clean room 100% FFU & perforated raise floor Plenum system Class 10,000 clean room
PROJECT HIGHLIGHTS CHEMICAL DISPENSING SYSTEM Site : semiconductors plant at Batu Kawan Experience: Chemical supply system Capacity: Acid supply (HNO3, HCL, H2SO4 etc.) Caustic supply (H2O2, NaOH etc.) Chemical supply tank yard Chemical supply pump system Site: wafer plant at KulIm Experience: Chemical supply system Capacity: Acid supply (HNO3, HCL, BOE etc.) Caustic supply (KOH, H2O2, NaOH etc.) Solvent supply (IPA, Thinner, Acetone etc.)
PROJECT HIGHLIGHTS PHARMACEUTICAL FACILITY Lab setup c/w laboratory furniture Lab setup c/w laboratory furniture Lab fumigation Microbiological test on air quality
CORPORATE SOCIAL RESPONSIBILITY POLICY
UNIMAS (Sarawak) Tree Planting Program Corporate CSR Corporate Social Social Responsibility (CSR)