s superior ability to absorb and transfer heat makes it the ideal choice for comfortable and efficient heating systems. Since 11 Bradford White Corporation has been dedicated to building the highest quality, most innovative equipment for the professional installer. Today, Bradford White Corporation offers a wide range of space heating and water heating equipment for both residential and commercial applications. Designed to be contractor-friendly, these units offer simplified installation and ease of service. Bradford White s hydronic boilers and volume water heaters are available in a wide range of sizes and are suitable for nearly every application. TABLE OF CONTENTS BRADFORD WHITE BOILERS Brute Mini Boiler s... Brute Elite Boiler s... Brute Elite 15 Boiler...5 Brute Elite 00 & 1700 Boiler s... Brute Deluxe Boiler s...7 Copper Brute II Boiler s... Brute Magnum Boiler s...9 Boiler Specifications...-11 BRADFORD WHITE VOLUME WATER HEATERS Brute Elite Volume Heater s...1 Brute Elite 00 & 1700 Volume Heater s...1 Brute Deluxe Volume Heater s...1 Copper Brute II Volume Heater s...15 Brute Magnum Volume Heater s...1 Volume Heater Specifications...17-1 Built to be the Best
BRADFORD WHITE BOILERS Brute Mini Boiler s The Brute Mini is a highly-efficient chimney vented heating boiler designed for residential and light commercial use. Brute Mini s simple design, compact size, can improve comfort and heating efficiency in nearly any hydronic system. All Brute Mini models comply with DOE 01 minimum efficiency requirements for residential boilers, and are factoryequipped with user-friendly boiler reset control system. Bradford White PowerStor Series Indirect Heaters are an ideal complement to any Brute Mini boiler installation. Available in Stainless Steel or Vitraglas lining, with sizes ranging from 0 gallons, the PowerStor Series provides superior corrosion resistance and delivers exceptional recovery with minimal loss. Brute Mini Boiler Standard Features: sizes, 50-5 MBTU/Hr. input 5% AFUE Category I Chimney Venting Natural or LP models ASME Certified Wet Wall copper heat exchanger with cast iron headers 0 PSI safety relief valve Built-in, low profile draft diverter Electronic Spark Ignition Manual Reset Blocked Vent Safety Switch Manual Reset Roll-Out Switch Adjustable high limit Integrated boiler reset control Adjustable reset curve Heat & DHW demand terminals DHW set point Status/diagnostic LED's Boiler Circulator Pump Relay Boiler Circulator Pump (50-15 s) Wrap-around powder-coated jacket with enclosed controls and wiring high density insulation Includes Vent Damper Finned copper water tubes with durable glass-lined, cast iron Wet Wall headers provide quick response to heating demands, with lower stand-by losses Spark ignition fires pilot only during heating demand, for reduced fuel use during idle periods Light weight & small size simplify maneuvering and installation in tight quarters Top mounted piping and vent connections reduce installation footprint Vent connection height accommodates lower chimney connections Industry standard controls simplify set-up and service Lanced burner tubes provide quiet, efficient operation
BRADFORD WHITE BOILERS Brute Elite Boiler s The Brute Elite heating boiler features a condensing, multi-pass stainless steel heat exchanger, with an advanced modulating control system, which allows the boiler to deliver exceptional efficiencies as high as 9.%. A front-mounted LCD display provides settings, status, and error messages, and all models include a built-in sequencer for staging control of up to eight Brute Elite units. Top-mounted piping & vent connections, with 0-foot PVC vent & intake lengths allow for simple installation - making the Brute Elite the ideal choice for high efficiency hydronic systems. All Brute Elite 0-500 boiler models include boiler circulator pump. Bradford White PowerStor Series Indirect Heaters are an ideal complement to any Brute Elite boiler installation. Available in Stainless Steel or Vitraglas lining, with sizes ranging from 0 gallons, the PowerStor Series provides superior corrosion resistance and delivers exceptional recovery with minimal loss. Brute Elite Boiler Standard Features: sizes, 0-50 MBTU/Hr. input High efficiency, condensing design Up to 9.% thermal efficiency ENERGY STAR certified (0-5 only) less than ppm Full-modulation burner, with 5:1 turndown Can be field converted from Natural to Propane Sealed combustion chamber Premix stainless steel burner Direct spark ignition system Negative pressure gas valve Operates at low gas pressure Horizontal or vertical direct vent Vent and air pipe lengths of up to 0 equivalent feet each Certified for AL9-C, CPVC, PVC, & rigid Polypropylene vent material Horizontal air and vent terminals Condensate trap with integrated float switch SOLA electronic PID modulating boiler control Large easy-to-read, multi-line graphic LCD display Full-text display of control status, settings, diagnostic info, and error history Home button provides direct access to customizable Home screen Test screen allows easy testing of control settings Quick Start screen groups common control settings for quick access by installer Password protection for adjustable settings Built-in cascade function for staging of up to Brute Elite units Adjustable Outdoor Reset System, w/wwsd & outdoor temperature sensor DHW Priority with protection Built-in Boiler, DHW, & System Circulator Pump Relays DHW tank sensor Separate low voltage and line voltage terminal strips Auxiliary limit control terminals Alarm output terminals Modbus communication Accepts external (-0mA or 0-VDC) modulation signal flow switch (99-50) On/Off power switch Manual reset high limit ket-less stainless steel heat exchanger with welded construction ASME H Stamp Certified for PSI working pressure Burner sight glass 0 psi (75 psi on 5-50) safety relief valve Temperature and pressure gauge Drain valve Top location of all vent, fuel, electrical, & piping connections Zero clearance to combustible surfaces 1 Year limited warranty on heat exchanger (0-, -Year Limited Warranty for 5-50) Year limited warranty on parts (0- models, 1 Year on 5-50) Includes boiler circulator (0-500 only)
BRADFORD WHITE BOILERS Brute Elite 15 Boiler The Brute Elite 15 is a wall-mounted 95% efficient, stainless steel condensing boiler available in both Combi and Heating Only models. The Brute Elite 15 can provide heat and up to.1 GPM of domestic hot water from a single space-saving appliance. Because it requires only a single gas connection, a single vent system, and includes a built-in expansion tank and boiler circulator - the Brute Elite 15 simplifies installation. Designed for wall-mounted installations, the Brute Elite is an attractive, efficient, and versatile solution for convenient, efficient heating equipment. Brute Elite 15 Boiler Standard Features: 95% AFUE efficiency, ENERGY STAR certified high efficiency condensing heat exchanger Modulation down to 0% of full fire (5:1 turndown) less than ppm Up to.1 GPM domestic hot water at 75 F temp rise (Combi models only) Sealed combustion chamber Pre-mix stainless steel burner Horizontal or vertical direct vent Vent and air pipe lengths of up to 0 equivalent feet (each) Horizontal vent and air terminals Stainless steel heat exchanger with welded construction ASME 0 psi (07kPa) working pressure heat exchanger ASME H Stamp 0 psi (07kPa) ASME pressure relief valve Stainless Steel brazed-plate DHW heat exchanger with priority for on-demand hot water (Combi models) Boiler pump, wired and mounted inside jacket Expansion tank piped and mounted inside jacket Built-in condensate trap and drain, priming not required Automatic air vent Temperature and pressure gauge Boiler water pressure switch Blocked vent pressure switch Blocked condensate pressure switch Burner site glass Electronic PID modulating control Direct spark ignition Multiple pump control for boiler pump and system pump, each with delay Large user-interface and display Alarm output Accepts external (-0mA or 0-VDC) modulation signal Outdoor reset (sensor included) Vent temp auto turn-down before lockout Manual reset high limit Lighted on/off toggle switch Wall mount template Field convertible between natural gas and propane Zero clearance to combustible surfaces 1-Year limited warranty on primary heat exchanger 5
BRADFORD WHITE BOILERS Brute Elite 00 & 1700 Boiler s The Brute Elite 00 & 1700 condensing boiler features a dual-burner stainless steel water tube heat exchanger, and advanced burner control with 1 and 1.7 million BTU/Hr. input, and :1 turndown. The Brute Elite 00 & 1700 operate at firing rates as low as 0,000 BTU/Hr., resulting in low temperature thermal efficiencies as high as 99%, and 9% at full fire. The Brute Elite 00 & 1700 s two equally sized burners can modulate independently of each other, closely matching the boiler s firing rate to the connected heating load, maximizing fuel utilization. The dual burner design also provides redundancy. If for some reason one of the two burners were to fail the other will still be available to provide heat. Information about boiler settings, status, diagnostics, and error history are visible in full text on the Brute Elite 00 & 1700 s multi-line graphic LCD display. The advanced Brute Elite 00 & 1700 control system also includes a cascading feature that allows lead/lag control for up to four boilers. An auto rotation function periodically changes the lead boiler to evenly spread service in multi-boiler applications. Modbus protocol is built-in with all Brute Elite 00 & 1700 boilers, allowing communication with Building Automation Systems. The Brute Elite 00 & 1700 are approved for use with PVC, CPVC, AL9-C, and rigid polypropylene vent materials with 0-equivalent foot maximum vent & intake lengths. Brute Elite 00 & 1700 Boiler Standard Features: Up to 9% full fire thermal efficiency, condensing operation % to 0% modulation (:1 turndown) less than ppm Sealed combustion Dual stainless steel pre-mix burners Horizontal or vertical direct vent Built-in condensate trap Indirect water heater priority Multi-line graphic LCD display Compact footprint Direct spark ignition system ket-less stainless steel heat exchanger with welded construction ASME H-Stamp psi maximum working pressure 75 psi (517kPa) ASME rated pressure relief valve Flow Switch Temperature and Pressure gauge Drain Valve Multiple pump control for boiler pump, system pump and indirect domestic water pump, each with delay Cascading PID modulating feature for up to boilers Lead / lag boiler rotation Alarm output Outdoor reset PVC, CPVC, Polypropylene or Stainless steel venting Direct vent up to 0 ft, Vertical or Horizontal Outdoor air temperature sensor On/off toggle switch Manual reset high limit Burner site glass All piping and wiring from the back of the boiler Modbus Communications Sealed cabinet suitable for Indoor/Outdoor installations 1-year parts warranty, -year limited heat exchanger warranty
BRADFORD WHITE BOILERS Brute Deluxe Boiler s Available with inputs ranging from 199 MBTU/Hr. through,000 MBTU/Hr., with efficiencies of 5%, Brute Deluxe Boilers offer an efficient, economical solution. The finned-copper heat exchanger provides quick response to heating demands. Its contractor-friendly design includes simple wiring and controls, along with fan assisted combustion to simplify installation in new and existing heating systems. The Brute Deluxe comes standard with an indoor/outdoor cabinet, and can be configured for category I, category III, or outdoor venting. Brute Deluxe 00, 00, & 00 models comply with DOE 01 minimum efficiency requirements for boilers, and are factory-equipped with user-friendly boiler reset control system. (00-00 MBTU/Hr. s) (500-000 MBTU/Hr. s) Brute Deluxe Boiler Standard Features: sizes, 199,000 MBTU/Hr. input Efficiencies up to 5.% less than ppm Sealed indoor/outdoor cabinet Factory mounted & wired nonferrous pump ASME finned copper tube heat exchanger ASME H or HLW stamp for heat exchangers psi max rating 75 psi relief valve Temperature/pressure gauge Glass-lined headers with external gaskets Flanged water connections Intake air filter Built-in draft fan Two-stage firing standard on all units Multiple operating gas valves/pressure regulators Manual gas shut-off valve Removable burner trays with stainless steel burners Burner sight glass On/Off toggle switch 115/ VAC transformer V control system Hot surface Ignition Air pressure switch flow switch Manual reset high limit Pump time delay External controller connections with selector switch Convertible top or rear vent/intake connections (199-99 MBTU/Hr. s) for use with Stacking Racks 7
BRADFORD WHITE BOILERS Copper Brute II Boiler s The Copper Brute II series boilers feature sealed, fan-assisted combustion and advanced PID staging controls with,, or -stage firing to achieve Low NOx operation with 5.% efficiencies. The Copper Brute II can be vented as a Cat I appliance, or as a Cat III appliance with horizontal venting lengths up to 50-equivalent ft. Combustion air can be drawn from the room or ducted directly to the unit from outdoors. Combustion air and vent connections can be field converted from the top to the rear of the unit, allowing two Copper Brute II models to be stacked using the Copper Brute II Racking System. One or more Copper Brute II Boilers can be combined with single, or multiple Bradford White storage tanks providing a wide range of storage and recovery capacities. Copper Brute II Boiler Standard Features: 7 sizes 500-,000 MBTU/Hr. Efficiencies of 5.% less than ppm Sealed indoor/outdoor cabinet Factory mounted & wired non-ferrous pump ASME finned copper tube heat exchanger psi max rating 75 psi relief valve Temperature/pressure gauge Glass-lined headers with external gaskets Flanged water connections Intake air filter Built-in draft fan Multiple operating gas valves/pressure regulators Manual gas shut-off valve Removable burner trays with stainless steel burners Burner sight glass On/Off toggle switch 115/ VAC transformer Electronic PID staging control with touchpad and LCD display Firing Modes: -Stage (500 & 750) -Stage (00) -Stage (150-000) PC board for electrical connections Diagnostic lights External control connections with selector switch V control system Hot surface Ignition Air pressure switch flow switch Auto reset high limit Manual reset high limit Pump time delay External controller connections with selector switch Convertible top or rear vent/intake connections for use with Copper Brute II Stacking Racks
BRADFORD WHITE BOILERS Brute Magnum Boiler s The Brute Magnum boiler is designed to deliver high efficiency and long-lasting performance for large BTU applications. The Brute Magnum is available in four models with inputs ranging from 1.. million BTU s. The secondary heat exchanger allows condensing operation at low temperatures, and can accept return water temperatures as low as 50 F. Full modulation firing adjusts the Brute Magnum s input to meet the demands of the system, resulting in exceptional efficiencies of up to 9%. Brute Magnum Boiler Standard Features: sizes, 1,00-,00 MBTU/Hr. input Efficiencies of up to 9% less than ppm Finned copper tube -pass heat exchanger with ASME psi rating Glass lined header & cover plate Secondary stainless steel condensing heat exchanger Stainless steel condensate collection systems 75 psi relief valve Full modulation firing capabilities down to 5% of input Variable speed, sealed combustion blower with spark-resistant motor & DC direct drive Proportional gas valve/regulator for seamless modulation High & low gas pressure switches Redundant safety gas valve, manual shut off valve Leak test valve Low fire start with time delay Washable combustion air filter May use ducted outside air, or room air for combustion Hot surface ignition Premix stainless steel burner with sealed combustion Cat. IV venting, horizontal or vertical terminations Non-ferrous circulating pump, factory mounted and wired inside cabinet Side-mounted supply and return water connections Temperature / pressure gauge Power on/off switch Diagnostic Indicator lights for: Power On, Call for Heat, Pre-Purge, Burner On, Ignition Failure Internal/External 0-VDC control selector Dry alarm contacts CSD-1 compliant Adjustable, manual reset high limit flow switch Manual reset low water cutoff with test switch Air pressure switch 9
BRADFORD WHITE BOILER SPECIFICATIONS Brute Mini Boiler s Natural and Liquid Propane s BJVS050NDJS BJVS075NDJS BJVS0NKJS BJVS15NKJS BJVSNKIS BJVS5NKIS 50,000 75,000 0,000 15,000,000 5,000 Output,000,000 5,000,000 1,000 191,000 AFUE 5.0% 5.0% 5.0% 5.0% 5.0% 5.0% Vent 5 5 7 Intake n/a n/a n/a n/a n/a n/a 1 / 1 / 1 / 1 / 1 / 1 / 1 1 / 1 1 / 1 1 / 1 1 / 1 1 / 1 1 / 1 1 1 1 11 Brute Elite Boiler s Natural and Liquid Propane s BNTH00NXNB BNTH5NXNB BNTH150NXNB BNTHNXNB BNTH5NXNB BNTH99NXNB BNTH500NXNB BNTH00NXXB BNTH700NXXB BNTH50NXXB 0,000 5,000 150,000,000 5,000 99,900 500,000 00,000 750,000 50,000 Output 7,000 9,000 1,000 19,000,000,000 75,000 57,000 7,000 1,000 AFUE 95.0% 95.0% 95.0% 95.0% 95.0% 9.5%* 95.0%* 95.%* 95.%* 95.7%* Vent Intake 1 / 1 / 1 / 1 / / / 1 1 1 1 / 1 1 / 1 1 1 1 1 1 / 1 1 / 1 1 / 1 1 / 15 5 7 1 9 9 50 *Thermal Brute Elite 15 Boiler s Natural and Liquid Propane s BLMH15NAXX BLMC15NAXX 15,000 15,000 Output 115,000 115,000 DHW Recovery @ 75F Rise (GPM) n/a.1 AFUE 95.0% 95.0% Vent Intake 1 / 1 / / / 1 15 Brute Elite 00 & 1700 Boiler s Natural and Liquid Propane s BNTH00NXX BNTH1700NXX 999,900 1,700,000 Output 9,000 1,,000 Thermal 9.% 9.0% Vent Intake 1 1 / 0 5
BRADFORD WHITE BOILER SPECIFICATIONS Brute Deluxe 00-000 Boiler s Natural and Liquid Propane s BMTH000NKCXN BMTH000NKCXN BMTH000NKCXN 00,000 99,000 99,000 Output 170,000 55,000 0,000 AFUE 5.1% 5.1% 5.%* Vent Intake 5 7 / / / 1 1 / 1 1 / 1 1 / 90 0 50 BMTH0500NACKCXN BMTH0750NACKCXN BMTH00NACKCXN BMTH150NACKCXN BMTH1500NACKCXN BMTH1750NACKCXN BMTH000NACKCXN 500,000 750,000 999,000 1,50,000 1,500,000 1,750,000 1,999,000 5,000,000 9,000 1,0,000 1,77,000 1,9,000 1,701,000 5.0%* 5.0%* 5.0%* 5.%* 5.%* 5.%* 5.%* 1 1 1 1 1 1 1 / 1 1 / 1 1 / 1 / 1 / 1 / 1 / 1 / 5 505 15 75 70 5 955 *Thermal Copper-Brute II Boiler s Natural and Liquid Propane s BWCH0500NACKCXN BWCH0750NACKCXN BWCH00NACNCXN BWCH150NACLCXN BWCH1500NACLCXN BWCH1750NACLCXN BWCH000NACLCXN 500,000 750,000 999,000 1,50,000 1,500,000 1,750,000 1,999,000 Output 5,000,000 9,000 1,0,000 1,,000 1,9,000 1,701,000 Thermal 5.0% 5.0% 5.0% 5.% 5.% 5.% 5.% Vent 1 Intake 1 1 1 1 1 1 / 1 1 / 1 1 / 1 / 1 / 1 / 1 / 1 / 0 50 70 70 15 0 1,0 Brute Magnum Boiler s Natural and Liquid Propane s BRHHH0NAIFEXN BRHHH0NAIFEXN BRHHH000NAIFEXN BRHHH00NAIFEXN 1,00,000 1,00,000,000,000,00,000 Output 1,090,000 1,5,000 1,1,000,1,000 Thermal 9.1% 9.1% 9.1% 9.1% Vent 7 Intake 1 1 1 / 1 1 / 1 1 / 1 / 1 / 1,0 1,5 1,5 1,550 11
BRADFORD WHITE VOLUME WATER HEATERS Brute Elite Volume Heater s Brute Elite volume water heaters feature condensing, multi-pass stainless steel heat exchangers, and advanced fully-modulating controls with 5:1 turndown allowing exceptional efficiencies as high as 97%. A front-mounted LCD display provides settings, status, and error messages, and all models include a built-in sequencer for staging control of up to eight Brute Elite units. One or more Brute Elite models can be connected to single or multiple Bradford White 0-5,000 gallon storage tanks, to provide a wide range of storage and recovery capacities for domestic water heating applications. Top-mounted piping & vent connections save space, and 0-foot PVC vent & intake lengths allows for simple installation. All Brute Elite 150-500 volume water heater models include circulator pumps. Brute Elite Volume Heater Standard Features: sizes, 150-50 MBTU/Hr. input High efficiency, condensing design, up to 97% efficiency Full-modulation burner, with 5:1 turndown less than ppm Operates on Natural or Propane Sealed combustion chamber Premix stainless steel burner Direct spark ignition system Negative pressure gas valve Operates at low gas pressure Horizontal or vertical direct vent Vent and air pipe lengths of up to 0 equivalent feet each Certified for AL9-C, CPVC, PVC, & rigid Polypropylene vent material Horizontal air and vent terminals Condensate trap with integrated float switch SOLA electronic PID modulating boiler control Large easy-to-read, multi-line graphic LCD display Full-text display of control status, settings, diagnostic info, and error history Home button provides direct access to customizable Home screen Test screen allows easy testing of control settings Quick Start screen groups common control settings for quick access by installer Password protection for adjustable settings Built-in cascade function for staging of up to Brute Elite units Built-in Circulator & Pump Relays DHW tank sensor Separate low voltage and line voltage terminal strips Auxiliary limit control terminals Alarm output terminals Modbus communication Accepts external (-0mA or 0-VDC) modulation signal flow switch (99-500) On/Off power switch Manual reset high limit ket-less stainless steel heat exchanger with welded construction ASME H Stamp Certified for PSI working pressure Burner sight glass 15 psi safety relief valve Temperature and pressure gauge Drain valve Non-ferrous trim and piping connections Top location of all vent, fuel, electrical, & piping connections Zero clearance to combustible surfaces 5 Year limited warranty on heat exchanger 1 Year limited warranty on parts Includes bronze circulator (150-500 only) 1
BRADFORD WHITE VOLUME WATER HEATERS Brute Elite 00 & 1700 Volume Heater s The Brute Elite 00 & 1700 condensing volume water heater features a dual burner stainless steel water tube heat exchanger, and advanced burner control with 1 and 1.7 million BTU/Hr. input, and :1 turndown. The Brute Elite 00 & 1700 operates at firing rates as low as 0,000 BTU/Hr., resulting in low temperature thermal efficiencies as high as 99%, and 9% at full fire. The Brute Elite 00 & 1700 s two equally sized burners can modulate independently of each other, closely matching the heater s firing rate to the connected load, maximizing fuel utilization. The dual burner design also provides redundancy. If for some reason one of the two burners were to fail, the other will still be available to provide heat. Information about control settings, status, diagnostics, and error history are visible in full text on the Brute Elite 00 & 1700 s multi-line graphic LCD display. The advanced Brute Elite 00 & 1700 control system also includes a cascading feature that allows lead/lag control for up to four heaters. An auto rotation function periodically changes the lead heater to evenly spread service in multi-boiler applications. Modbus protocol is built-in with all Brute Elite 00 & 1700 volume water heaters, allowing communication with Building Automation Systems. The Brute Elite 00 & 1700 are approved for use with PVC, CPVC, AL9-C, and rigid polypropylene vent materials with 0-equivalent foot maximum vent and intake lengths. Brute Elite 00 & 1700 Volume Heater Standard Features: Up to 9% full fire thermal efficiency, condensing operation % to 0% modulation (:1 turndown) less than ppm Sealed combustion Dual stainless steel pre-mix burners Horizontal or vertical direct vent Built-in condensate trap Multi-line graphic LCD display Compact footprint Direct spark ignition system ket-less stainless steel heat exchanger with welded construction ASME H-Stamp psi maximum working pressure 15 psi (517kPa) ASME rated pressure relief valve Flow Switch Temperature and Pressure gauge Drain Valve Multiple pump control for boiler pump, system pump and indirect domestic water pump, each with delay Cascading PID modulating feature for up to boilers Lead / lag boiler rotation Alarm output Outdoor reset PVC, CPVC, Polypropylene or Stainless Steel venting Direct vent up to 0 ft, Vertical or Horizontal Outdoor air temperature sensor On/off toggle switch Manual reset high limit Burner site glass All piping and wiring from the back of the boiler Modbus Communications Sealed cabinet suitable for indoor/outdoor installations 1-year parts warranty, 5-year limited heat exchanger warranty 1
BRADFORD WHITE VOLUME WATER HEATERS Brute Deluxe Volume Heater s Available with inputs ranging from 199 MBTU/Hr. through,000 MBTU/Hr., with efficiencies of 5%, Brute Deluxe volume water heaters offer an efficient, economical solution for domestic water heating applications. One or more Brute Deluxe volume water heater can be combined with single, or multiple Bradford White storage tanks providing a wide range of storage and recovery capacities for domestic water heating applications. The finned-copper tube heat exchanger resists scale build-up, maintaining a high level of efficiency throughout the life cycle. Its contractor-friendly design includes simple wiring and controls, along with fan assisted combustion to simplify installation in new and existing systems. The Brute Deluxe comes standard with an indoor/outdoor cabinet, and can be configured for category I, category III, and outdoor venting configurations. (00-00 MBTU/Hr. s) (500-000 MBTU/Hr. s) Brute Deluxe Volume Heater Standard Features: sizes, 199,000 MBTU/Hr. input Efficiencies up to 5% less than ppm Sealed indoor/outdoor cabinet Factory mounted & wired nonferrous pump ASME finned copper tube heat exchanger ASME H or HLW stamp for heat exchangers psi max rating 15 psi relief valve Temperature/pressure gauge Glass-lined headers with external gaskets Flanged water connections Intake air filter Built-in draft fan Two-stage firing standard on all units Multiple operating gas valves/pressure regulators Manual gas shut-off valve Removable burner trays with stainless steel burners Burner sight glass On/Off toggle switch 115/ VAC transformer V control system Hot surface Ignition Air pressure switch flow switch Manual reset high limit Pump time delay External controller connections with selector switch Convertible top or rear vent/intake connections (199-99 MBTU/Hr. s) for use with Stacking Racks 1
BRADFORD WHITE VOLUME WATER HEATERS Brute Magnum Volume Heater s The Brute Magnum volume water heater is designed to deliver high efficiency and longlasting performance for large volume water heating applications. Available in four models with inputs ranging from 1.. million BTU s, the Brute Magnum secondary heat exchanger allows condensing operation at low temperatures, and can accept return water temperatures as low as 50 F. Full modulation firing adjusts the Brute Magnum s input to meet the demands of the system, resulting in exceptional efficiencies of up to 9%. One or more Brute Magnum VWH can be combined with single, or multiple Bradford White storage tanks providing a wide range of storage and recovery capacities for domestic water heating applications. Brute Magnum Volume Heater Standard Features: sizes, 1,00-,00 MBTU/Hr. input Efficiencies of up to 9% less than ppm Finned copper tube -pass heat exchanger with ASME psi rating Glass lined header & cover plate Secondary stainless steel condensing heat exchanger Stainless steel condensate collection systems 15 psi relief valve Full modulation firing capabilities down to 5% of input Variable speed, sealed combustion blower with spark-resistant motor & DC direct drive Proportional gas valve/regulator for seamless modulation High & low gas pressure switches Redundant safety gas valve, manual shut off valve Leak test valve Low fire start with time delay Washable combustion air filter May use ducted outside air, or room air for combustion Hot surface ignition Premix stainless steel burner with sealed combustion Cat. IV venting, horizontal or vertical terminations Boiler circulating pump, factory mounted and wired inside cabinet Side-mounted supply and return water connections Temperature / pressure gauge Power on/off switch Diagnostic Indicator lights for: Power On, Call for Heat, Pre-Purge, Burner On, Ignition Failure Internal/External 0-VDC control selector Dry alarm contacts CSD-1 compliant Adjustable, manual reset high limit flow switch Manual reset low water cutoff with test switch Air pressure switch 15
BRADFORD WHITE VOLUME WATER HEATERS Copper Brute II Volume Heater s The Copper Brute II series volume water heaters feature sealed, fan-assisted combustion and advanced PID staging controls with,, or -stage firing to achieve Low NOx operation with %+ efficiencies. The Copper Brute II can be vented as a Cat I appliance, or as a Cat III appliance with horizontal venting lengths up to 50-equivalent ft. Combustion air can be drawn from the room or ducted directly to the unit from outdoors. Combustion air and vent connections can be field converted from the top to the rear of the unit, allowing two Copper Brute II models to be stacked using the Copper Brute II Racking System. One or more Copper Brute II VWH can be combined with single, or multiple Bradford White storage tanks providing a wide range of storage and recovery capacities for domestic water heating applications. Copper Brute II Volume Heater Standard Features: 7 sizes 500-,000 MBTU/Hr. Efficiencies of %+ less than ppm Sealed indoor/outdoor cabinet Factory mounted & wired nonferrous pump ASME finned copper tube heat exchanger psi max rating 15 psi relief valve Temperature/pressure gauge Glass-lined headers with external gaskets Flanged water connections Intake air filter Built-in draft fan Multiple operating gas valves/pressure regulators Manual gas shut-off valve Removable burner trays with stainless steel burners Burner sight glass On/Off toggle switch 115/ VAC transformer Electronic PID staging control with touchpad and LCD display Firing Modes: -Stage (500 & 750) -Stage (00) -Stage (150-000) PC board for electrical connections Diagnostic lights External control connections with selector switch V control system Hot surface Ignition Air pressure switch flow switch Auto reset high limit Manual reset high limit Pump time delay External controller connections with selector switch Convertible top or rear vent/intake connections for use with Copper Brute II Stacking Racks 1
BRADFORD WHITE VOLUME WATER HEATER SPECIFICATIONS Brute Elite Volume Heater s Natural and Liquid Propane s BNTV150NXN BNTV199NXN BNTV5NXN BNTV99NXN BNTV500NXN BNTV00NXX BNTV700NXX BNTV50NXX 150,000 199,000 5,000 99,000 500,000 00,000 750,000 50,000 Thermal 95% 97% 95% 9% 9% 97% 9% 9% Recovery @ 0 F Degree Rise 17 7 1 50 91 97 Vent Intake 1 / 1 / / / 1 1 1 1 / 1 1 / 1 1 / 1 1 / 5 7 1 9 9 50 Brute Elite 00 & 1700 Volume Heater s Natural and Liquid Propane s BNTV00NXX1 BNTV1700NXX1 999,900 1,700,000 Thermal 95% 9% Recovery @ 0 F Degree Rise 1,1 1,9 Vent Intake 1 1 / 1 / 0 5 Brute Deluxe 00-00 Volume Heater s Natural and Liquid Propane s BMTV000NACKBLN BMTV000NACKBLN BMTV000NACKBLN BMTV0500NACKBXN BMTV0750NACKBXN BMTV00NACKBXN BMTV150NACKBXN BMTV1500NACKBXN BMTV1750NACKBXN BMTV000NACKBXN 199,900 00,000 99,900 500,000 750,000 999,000 1,50,000 1,500,000 1,750,000 1,999,000 Thermal 5% 5% 5% % % % % % % % Recovery @ 0 F Degree Rise 0 0 0 5 7 1,019 1,7 1,51 1,7,00 Vent 1 1 1 1 Intake 5 7 1 / / / 1 1 / 1 1 / 1 1 / 1 1 / 1 1 / 1 1 / 1 / 1 / 1 / 1 / 1 / 90 0 50 5 505 15 75 70 5 955 17
BRADFORD WHITE VOLUME WATER HEATER SPECIFICATIONS Copper Brute II Volume Heater s Natural and Liquid Propane s BWCV0500NACKBXN BWCV0750NACKBXN BWCV00NACNBXN BWCV150NACLBXN BWCV1500NACLBXN BWCV1750NACLBXN BWCV000NACLBXN 500,000 750,000 999,000 1,50,000 1,500,000 1,750,000 1,999,000 Thermal % % 5% % % % 5% Recovery @ 0 F Degree Rise 5 75 1,019 1,7 1,51 1,7,00 Vent 1 Intake 1 1 1 1 1 1 / 1 1 / 1 1 / 1 / 1 / 1 / 1 / 1 / 0 50 70 70 15 0 1,0 Brute Magnum Volume Heater s Natural and Liquid Propane s BRHHV0NAIFEXN BRHHV0NAIFEXN BRHHV000NAIFEXN BRHHV00NAIFEXN 1,00,000 1,00,000,000,000,00,000 Thermal 9% 9% 9% 9% Recovery @ 0 F Degree Rise 1,97 1,79,,59 Vent 7 Intake 1 1 1 / 1 1 / 1 1 / 1 / 1 / 1,0 1,5 1,5 1,550 1
The Perfect Combination For Improved Performance and Savings Bradford White PowerStor indirect water heaters are the perfect compliment to your Bradford White boiler. By utilizing the boiler's output to heat domestic water, PowerStor indirect water heaters can provide exceptional performance and efficiency. 1 different models, with single coil, and double coil models, and sizes ranging from 0-119 gallons. Available with single or double wall Heat Exchanger coils Three Protective Anode Rods provides protection against corrosion for long trouble-free service Available with Vitraglas coated carbon steel, or 00-series Stainless Steel (SS) tank and coil " Non-CFC foam insulation minimizes heat loss from tank Low Stand-by Heat Loss Less than 1 F per hour Factory Installed Hydrojet Total Performance System reduces Sediment buildup for exceptional performance and efficiency. T&P Relief Valve Installed on all models Limited Lifetime Warranty on Tank and Heat Exchanger, Six Year Limited Warranty on Parts Tanks In All Sizes And For Any Application Bradford White storage tanks are uniquely designed and manufactured to meet the exact needs of your high volume commercial applications. Choose your specific tank size, features and options and get a quality product made in America. Available Features and Options: Tank Orientation Options: Vertical Configuration Minimizes the installed footprint of the tank Horizontal Configuration Ideal when overhead clearance is an issue Tank Lining Options: Vitraglas lined An exclusive corrosion-resistant coating is bonded to the interior surfaces at 0 F backed by a 5-year limited warranty Double Vitraglas lined The Vitraglas lining process is repeated twice, providing a double layer of protection, backed by a -year limited warranty Pressure Ratings Options: 15 PSI ASME Sec. IV Part HLW 150 PSI ASME Sec. IV Part HLW Exterior Options: Bare (Red Oxide Primer) Jacketed & Insulated (Steel Jacket, High Density Foam Insulation) Top Coat (Rigid Acrylic coating over ¼ layer of High Density Foam) Optional Tank Connections & Openings: ¾ NPT tappings -1 Flanges Hydrojet HC Dielectric Recirculation Tube (for NPT Heater Supply Fittings) Inlet Baffle (Available for all Heater Supply Fitting Sizes) X Handhole 1 X 1 Manway
Ambler, PA For U.S. and Canada field service, contact your professional installer or local Bradford White sales representative. Sales/ 00-5-91 Fax/15-1-170 Technical Support/ 00--9 Fax/9-795-9 Warranty/00-51-111 Fax/9-795-9 International: Telephone/15-1-900 T elefax/15-1-9750 Mississauga, ON Sales/Technical Support -90-091 905--00 Fax/905--05 www. bradfordwhite.com HDB-HVWH-01