WIDE-DISPERSION FLUSH-MOUNT CEILING SPEAKER F-282C F-2322C F-232C F-22C F-232SC F-22SC DESCRIPTION TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency rolloff that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency rolloff characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceilingmounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that. FEATURES Designed to blend into ceilings with a smooth, low-profile design. Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear. ( F-22C, F-232C, F-282C, F-2322C models) Minimal high frequency rolloff allows clear and wellbalanced sound reproduction over a wide listening area. Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently. The Electronic Controller (AC-2) option is required to provide increased control of the F-22C's speaker response.
WIDE-DISPERSION FLUSH-MOUNT CEILING SPEAKER Delivering a new level of audio performance in ceiling-mounted speakers. Conventional Speaker Wide- Dispersion Speaker A A Expanded listening area coverage thanks to the extra-wide dispersion characteristics of TOA's ceiling speakers makes it possible to utilize fewer speakers to cover a desired area, allowing more cost-effective installations. Conventional Speaker SP SP 2 A SP A SP SP 2 Wide-Dispersion Speaker SP SP 2 A SP A SP SP 2
F-282C (6cm cone) HIGH POWER (6W) 2-WAY WIDE RANGE Designed for higher power (6W) applications in locations having higher ceilings that are in the range of 3 to 6 meters. Equipped with back can meeting heat-resistant specifications. Equipped with a diffuser for wide dispersion of high frequencies. [d] vs. Polar Response 9 8-2 -2 7 - - 6 4 3 3 2Hz 2Hz 6Hz 3 3 Hz 4Hz 3Hz 3 2 k k k 2k eamwidth vs. [deg] 2 eamwidth -2-3 3 Hz 8Hz 63Hz -2-3 3 2Hz 6Hz 2Hz 2 k k k 2k [ohm] 2 vs. -2 - -2-2 k k k 2k 3 3 4Hz 3Hz 2Hz 3 3 8Hz 63Hz Hz Directivity Factor vs. [Q] Directivity Factor 2-2 - 2 k k k 2k 3 3 6Hz 2Hz Hz
F-2322C (2cm cone) 3W SERIES FULL RANGE A cost-effective full-range speaker that is ideal for most ceiling sound requirements. (recommended 2 to 4m) Equipped with back can meeting heat-resistant specifications. Flat front panel mounts flush. vs. [d] Polar Response 9 8-2 -2 7 - - 6 4 3 3 2Hz 2Hz 6Hz 3 3 Hz 4Hz 3Hz 3 2 k k k 2k eamwidth vs. [deg] 2 eamwidth -2-3 3 Hz 8Hz 63Hz -2-3 3 2Hz 6Hz 2Hz 2 k k k 2k [ohm] 2 vs. -2 - -2-2 k k k 2k 3 3 4Hz 3Hz 2Hz 3 3 8Hz 63Hz Hz Directivity Factor vs. [Q] Directivity Factor 2-2 - 2 k k k 2k 3 3 6Hz 2Hz Hz
F-232C (2cm cone) 3W SERIES 2-WAY WIDE RANGE Standard 2-way ceiling speaker for applications requiring a full range frequency response. (recommended 2 to 4m) Equipped with back can meeting heat-resistant specifications. Equipped with a diffuser for wide dispersion of high frequencies. [d] vs. Polar Response 9 8-2 -2 7 - - 6 4 3 3 2Hz 2Hz 6Hz 3 3 Hz 4Hz 3Hz 3 2 k k k 2k eamwidth vs. [deg] 2 eamwidth -2-3 3 Hz 8Hz 63Hz -2-3 3 2Hz 6Hz 2Hz 2 k k k 2k [ohm] 2 vs. -2 - -2-2 k k k 2k 3 3 4Hz 3Hz 2Hz 3 3 8Hz 63Hz Hz Directivity Factor vs. [Q] Directivity Factor 2-2 - 2 k k k 2k 3 3 6Hz 2Hz Hz
F-22C (2cm cone) EQUALIZING CONTROLLED TYPE 3W SERIES FULL RANGE AC-2 Optimized for use with the optional AC-2 Electronic Controller to deliver the highest quality audio in ceiling-mounted speakers as well as to tailor speaker response to suit specific installation requirements. (recommended 2 to 4m) Equipped with back can meeting heat-resistant specifications. Equipped with a diffuser for wide dispersion of high frequencies. [d] vs. Polar Response 9 8-2 -2 7 - - 6 4 3 3 2Hz 2Hz 6Hz 3 3 Hz 4Hz 3Hz 3 2 k k k 2k Without EQ With EQ eamwidth vs. [deg] 2 eamwidth -2-3 3 Hz 8Hz 63Hz -2-3 3 2Hz 6Hz 2Hz 2 k k k 2k [ohm] 2 vs. -2 - -2-2 k k k 2k 3 3 4Hz 3Hz 2Hz 3 3 8Hz 63Hz Hz Directivity Factor vs. [Q] Directivity Factor 2-2 - 2 k k k 2k 3 3 6Hz 2Hz Hz
F-232SC (2cm cone) 6W SERIES 2-WAY WIDE RANGE Perfect for low power use, this speaker has increased cost-effectiveness and includes a metal "back can" for greater installation ease. (recommended 2 to 4m) ecause there is no back can, it can be mounted in ceilings even having minimal depth. Equipped with a diffuser for wide dispersion of high frequencies. [d] vs. Polar Response 9 8-2 -2 7 - - 6 4 3 3 2Hz 2Hz 6Hz 3 3 Hz 4Hz 3Hz 3 2 k k k 2k eamwidth vs. [deg] 2 eamwidth -2-3 3 Hz 8Hz 63Hz -2-3 3 2Hz 6Hz 2Hz 2 k k k 2k [ohm] 2 vs. -2 - -2-2 k k k 2k 3 3 4Hz 3Hz 2Hz 3 3 8Hz 63Hz Hz Directivity Factor vs. [Q] Directivity Factor 2-2 - 2 k k k 2k 3 3 6Hz 2Hz Hz
F-22SC (cm cone) 6W SERIES FULL RANGE Special compact model designed for low output applications. (recommended 2 to 4m) ecause there is no back can, it can be mounted in ceilings even having minimal depth. Flat front panel mounts flush. [d] vs. Polar Response 9 8-2 -2 7 - - 6 4 3 3 2Hz 2Hz 6Hz 3 3 Hz 4Hz 3Hz 3 2 k k k 2k eamwidth vs. [deg] 2 eamwidth -2-3 3 Hz 8Hz 63Hz -2-3 3 2Hz 6Hz 2Hz 2 k k k 2k [ohm] 2 vs. -2 - -2-2 k k k 2k 3 3 4Hz 3Hz 2Hz 3 3 8Hz 63Hz Hz Directivity Factor vs. [Q] Directivity Factor 2-2 - 2 k k k 2k 3 3 6Hz 2Hz Hz
APPEARANCE AND DIMENSIONAL DIAGRAMS F-282C Front View Side View Rear View Safety wire 6 cm in length (accessory) ø2 (Mounting hole) ø28 3 ø24 38 ø3.4 6 227 4 ø2 Ceiling Max. 37 Max. 2. Ceiling reinforcement ring (accessory) Ceiling mounting Ceiling reinforcement ring (accessory) F-2322C ø23 ø9 Front View 2 ø26.4 6 Side View 2 Rear View Safety wire 6 cm in length (accessory) ø2 (Mounting hole) 4 ø2 3 Ceiling Max. 37 Max. 2. Ceiling reinforcement ring (accessory) Ceiling mounting Ceiling reinforcement ring (accessory) F-232C ø23 ø9 Front View ø26.4 4 6 Side View 229 Rear View Safety wire 6 cm in length (accessory) ø2 (Mounting hole) 4 ø2 3 Ceiling Max. 37 Max. 2. Ceiling reinforcement ring (accessory) Ceiling reinforcement ring (accessory) Ceiling mounting Unit: mm
APPEARANCE AND DIMENSIONAL DIAGRAMS F-22C ø23 ø26.4 4 ø9 Front View 6 Side View 229 Rear View Safety wire 6 cm in length (accessory) ø2 (Mounting hole) 4 ø2 3 Ceiling Max. 37 Max. 2. Ceiling reinforcement ring (accessory) Ceiling mounting Ceiling reinforcement ring (accessory) F-232SC ø23 Front View 4 4 Side View Rear View ø2 (Mounting hole) Ceiling Max. 37 Max. 3 Ceiling mounting F-22SC ø Front View 7 Rear View Side View ø3 (Mounting hole) Ceiling Max. 37 Max. 6 Ceiling mounting Unit: mm
OPTIONS HY-C ack Can 22 2 ø2 knockout hole ø22 or ø28 knockout hole The HY-C ack Can is a metal case attached to flush-mount ceiling speaker when mounted in exposed applications. The ack Can is hung from a ceiling suspension pipe. ø2 ø24 Specifications Finish Surface-treated steel plate, t.8, black, paint Weight,kg Accessory Rubber grommet x 2 HY-TR Trim Ring ø32 ø2.2 The HY-TR Trim Ring allows installation of flush-mounted ceiling speakers in pre-existing ceiling panel holes which are over 2mm in diameter. The use of 2 Trim Rings allows the speaker to be mounted in holes from 24mm to 3mm in diameter. Specifications Ceiling Hole Diameter ø2 ø3mm Finish Surface-treated steel plate, white, paint Weight g HY-T Tile ar ridge.2 2 3 2 2 ø3.4 3 7 (3 9) 63 3 9 2 ø3.4 2 4. 34. 23 Magnified view of preinstalled tie-plate 6. The HY-T is channel bar to be used when supporting flushmounted ceiling speakers by way of ceiling bars to prevent their full weight from being directly applied to the ceiling panel during installation. This channel bar is used in conjunction with reinforcement hardware supplied with the speaker. One complete set consists of 2 HY-T bars. Specifications Finish Steel plate, plating Weight g (for set of 2 bars) Accessory Mounting screw x 4 HY-AH Anchor Hanging racket 263.8 33.8 62 The HY-AH Anchor Hanging racket is designed to support ceilingsuspended speakers from an anchor bolt in order to prevent the speaker's full weight from being directly applied to the ceiling panel. It is used in conjunction with reinforcement hardware supplied with the speaker. 6. 26.8 3.8. 6 3 Specifications Finish Steel plate, plating Weight 7g Accessory Paper pattern x AC-2 Electronic Controller The AC-2 is a controller for F-22C, F-2C/2CM or F, 6 series. Specifications 4 7. AC Line Voltage Power Consumption AC mains, /6Hz 9W 2V version 9W 22 24V version 44 Total Harmonic Distortion Less than.% (khz, +4d*) 466 3.8 Hum and Nose Less than 94d* (2Hz 2kHz.P.F) 482.6 Input +4d* k ohns balanced phone jack Max input level: + 2d* Output CH out +4 d* 6 ohms balanced phone jack Max output level: +2d* 28. 297. Low out +4d* 6 ohms balanced phone hack Max output level: +2d* Filter: 2d per octave Cut off frequency: z Low Cut Center frequency Hz, 6d cut (for F-22C and F-2C) Finish lack Dimensions 482.6 (W) x 44 (H) x 297. (D)mm Weight 3.7kg Unit: mm * d =.77Vrms
SPECIFICATIONS Model No. Enclosure Rated Input Power Handling Capacity V line: 7V line: 2V line: Low (adjustable) Sound Pressure Level Response Speaker Component High frequency: Low frequency: Mounting Hole Input Terminal Usable Cable Finish Enclosure: affle: Rim: Punched net: Dust-proof bag: Dimensions Weight Accessories Panel: Ceiling reinforcement ring: Safety wire: Paper pattern: Option Anchor hanging bracket: ack can: Tile bar bridge: Trim ring: Electronic controller: F-282C F-2322C F-232C F-22C F-232SC F-22SC 6W (high impedance) Continuous pink noise: 9W (8Ω), 6W (6Ω) Continuous program: 8W (8Ω), 2W (6Ω) 7Ω (6W), 33Ω (3W) 67Ω (W), 3.3kΩ (3W) 83Ω (6W), 7Ω (3W) 33Ω (W), 67Ω (7.W) 3.3kΩ (.W) 83Ω (7.W), 7Ω (3.7W) 33Ω (.9W), 67Ω (.9W) 3.3kΩ (.2W) Dome-type 6cm cone-type ø2mm (maximum ceiling thickness: 37mm) ø28 x 227 (D)mm.kg (including mounting accessories) ass reflex type 3W (high impedance) Continuous pink noise: 6W (8Ω), 3W (6Ω) Continuous program:2w (8Ω), 6W (6Ω) 33Ω (3W), kω (W), 3.3k Ω (3W), kω (W) 7Ω (3W), 33Ω (W),kΩ (W), 3.3kΩ (.W),kΩ (.W) 7Ω (3.7 W), 33Ω (.9W), kω (.6W), 3.3kΩ (.2W), kω (.6W) Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals) Solid copper wire: ø. ø.6mm (equivalent to AWG No. 24 4) Stranded copper wire:.2 2.mm 2 (equivalent to AWG No. 24 4) Fire-resistant AS resin (resin material grade; UL-94 V- or its equivalent), black Fire-resistant AS resin (resin material grade; UL-94 V- or its equivalent), white, paint 3.7kg (including mounting accessories) HY-AH HY-T 3.7kg (including mounting accessories) HY-TR Steel plate, white, paint HY-C AC-2C 6W (high impedance).7kω (6W), 3.3kΩ (3W) kω (W), 2kΩ (.W) 83Ω (6W),.7kΩ (3W) 3.3kΩ (.W),kΩ (.W) 2kΩ (.2W) alanced dome-type alanced dome-type 2cm cone-type 2cm cone-type cm cone-type 2cm cone-type 2cm cone-type Steel plate, plating Artificial fiber, black 3.7kg (including.kg (including panel) mounting accessories).7kω (6W), 3.3kΩ (3W) 83Ω (6W),.7kΩ (3W) 3.3kΩ (.W) 9d (W, m) 9d (W, m) 9d (W, m) 9d (W, m) 89d (W, m) 88d (W, m) 6 2,Hz ( d), 4 2,Hz ( 2d) at installation in /2 free sound field (measured by installing the unit in the center of a ceiling.) 7 2,Hz ( d), 2,Hz ( 2d) at installation in /2 free sound field (measured by installing the unit in the center of a ceiling.) ø23 x 2 (D)mm Note: The F-22C must be used with an Electronic Controller AC-2. ø2 (maximum ceiling thickness: 37mm) ø23 x 229 (D)mm 6Ω, 8Ω ø23 x 229 (D)mm Continuous pink noise: 9W (8Ω), 6W (6Ω) Continuous program: 8W (8Ω), 2W (6Ω) 83Ω (.7W),.7kΩ (.4W) 3.3kΩ (.2W),kΩ (.6W) 2kΩ (.3W) 8 2,Hz ( d), 2,Hz ( 2d) at installation in /2 free sound field (measured by installing the unit in the center of a ceiling.) ø3mm (maximum ceiling thickness: 37mm) Push-in connector (ridging terminal-2 branch type) ø23 x 4 (D)mm 83Ω (.7W).7kΩ (.4W) 3.3kΩ (.2W) 6 8,Hz ( d), 4 2,Hz ( 2d) at installation in /2 free sound field (measured by installing the unit in the center of a ceiling.) 6V Vinyl-insulated cable (IV wire or HIV wire) Solid copper wire; ø.8 ø.6mm (equivalent to AWG No.2 ) 7-core twisted copper wire:.7.2mm 2 (equivalent to AWG No.8 7) ø x 7 (D)mm kg (including panel) TOA Corporation URL : http://www.toa.jp/ Specifications are subject to change without notice. Printed in Japan (34) 833-2-2 U