Read online: shop.bsigroup.com/usonline. October 2014

Read online: shop.bsigroup.com/usonline October 2014 Introducing BS ISO/IEC 27018:2014 Information technology Security techniques Code of practice for protection of personally identifiable information (PII) in public clouds acting as PII processors Contents 4 Quick Reference Guide 10 New and revised British Standards 10 BS EN publications 15 British Standard implementations 19 Published Documents 20 Specialist books from BSI 20 Corrigenda to British Standards 21 Updated British Standards 22 British Standards proposed for confirmation and confirmed 23 British Standards withdrawn 25 British Standards under review 36 New work started 41 Draft British Standards 48 Documents not issued as DPCs 48 CEN publications 50 CENELEC publications 51 IEC publications 57 ISO publications See back cover for more information

Welcome to Update Standards In these pages you ll find details of new, revised, draft and withdrawn standards and publications from the last month. Update Standards is designed to help you keep track of the standards you use, and discover new standards that could help your organization. Free expert help from our Knowledge Centre Our information professionals will take the hassle out of your standards and subject searches by doing them for you. They can provide you with information on what a standard covers, carry out subject searches and even provide you with expanded information on what a standard covers through keyword searches, saving you a huge amount of time and effort. They ll also search for standards from over 200 standards organizations in 23 countries if that s what you need. This service is available exclusively for BSI Members only. To find out more about what the Knowledge Centre can do for you, contact us today: Phone +44 20 8996 7004 Fax +44 20 8996 7005 Email knowledgecentre@bsigroup.com How to order The standards, publications and conferences featured in this magazine are available online or from our customer services team. Customer services is open from 09:00-17:00 Monday to Friday. Phone +44 845 086 9001 Website shop.bsigroup.com/uscustomerservices Email orders@bsigroup.com to place an order. info@bsigroup.com to make an enquiry Fax +44 20 8996 7001 Post BSI Customer Services 389 Chiswick High Road London W4 4AL +44 845 086 9001 bsigroup.com/uscustomerservices BSI Training Our tutors are skilled in transferring knowledge contained within each standard to help you embed excellence within your organization. We trained 90,000 people globally last year, and with over 72,000 clients in 150 countries, you can trust BSI to help you perform better, reduce risk and grow sustainably. Visit us and download our training catalogue today: bsigroup.com/ustraining

BSI Events Upcoming events: FREE Sustainability Standards Navigator Webinar 1 October 2014, London A recently launched new website from BSI - Sustainability Standards Navigator - can now guide you on your journey through the often complex world of sustainability standardization. The Sustainability Standards Navigator webinar will give you more insight about how you can access the standards that meet your most pressing sustainability needs. FREE Timber Expo 7-8 October 2014, Birmingham Timber Expo is the most important event on the UK construction calendar dedicated exclusively to timber, its associated technologies and its many applications. It caters for all those involved in specifying and supplying timber solutions in the construction sector. Visit us on stand E30 FREE Health and Safety North 2014 8-9 October 2014, Bolton The Health and Safety Regional Events series of events has been developed to suit anyone responsible for health and safety at work. Visit us on stand H28 Information Security Conference 2014 11 November 2014, London Join us at Information Security 2014 and get up-to-date with the latest security issues, the most pressing threats of tomorrow and how we can effectively address them. Bringing together security experts, senior officials and policy-makers from across public sector and industry to discuss the ever-changing threats posed by cybercrime, this event is not to be missed. Fire Safety Conference 2014 18 November 2014, London The quality of your fire safety policy, design and management could make a critical difference between life and death. But how do you make sure that you have taken all the necessary steps to minimize risks and improve fire safety? The implementation of British standards on fire safety are proven to be a valuable and important step forward in improving an organization's fire policy and safety measures. By attending the conference you will gain an in depth understanding of the forthcoming changes to these key standards and hear about the impact they will have on you, your organization, and the fire safety industry. Read more and book your place bsigroup.com/usevents Action Manager Implementation Training 24 October 2014, Milton Keynes Whether you're brand-new or experienced with BSI Action Manager, get the core knowledge you need to get up to speed, perform at your best, and get the most out of your application. Our classroom based Action Manager Implementation training course will walk you through steps to implement and use Action Manager in your organization. ETSI standards Wondering where you can see the latest list of ETSI standards and keep up-to-date with the programme? A list of ETSI documents is available for download on our website. telecoms.bsigroup.com Or if you wish to order your documents of interest, please call our customer services team on +44 845 086 9001 or specific contact details against the ETSI standard. Sign up to our free newsletters Get the latest standards and industry news shop.bsigroup.com/newsletters Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 845 086 9001. BSI British Standards Institution 2014

British Standards Quick Reference Guide The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in New Work Started. Quick reference guide Building and civil engineering BS 5493...22 BS 5534...10 DD CEN/TS 15548...19 BS EN 326...21 BS EN 791...11, 12, 23 BS EN 932...20 BS EN 996...11, 12, 23 BS EN 1873...20 BS EN 1994...20 BS EN 1996...22 BS EN 12326...11 BS EN 13310...23 BS EN 14190...11 BS EN 15752...11 BS EN 15755...11 BS EN 16228...11, 12, 23 BS ISO 1803...31 BS ISO 9869...17 BS ISO 14401...34 BS ISO 21573...18 PD CEN/TS 15548...19 PD CEN/TS 16628...19 PD CEN/TS 16629...19 PD CEN/TS 16637...19 PD 6688...22 PD ISO/TR 15686...19 Consumer products and services BS 684...27, 29 BS 6740...26 BS 7012...17, 23 BS 8892...10 BS EN ISO 662...27 BS EN ISO 2825...27 BS EN ISO 3218...10, 25 BS EN ISO 6885...27 BS EN ISO 6886...27 BS EN ISO 7541...27 BS EN ISO 9936...28 BS EN ISO 15753...29 BS EN ISO 15788...29 BS EN ISO 21415...30 BS EN ISO 21569...30 BS EN ISO 21570...30 BS EN ISO 21571...30 BS EN ISO 23275...30 BS EN ISO 24276...30 BS EN ISO 30024...31 BS EN 50131...14, 21 BS ISO 1871...31 BS ISO 3218...10, 25 BS ISO 3976...31 BS ISO 4720...31 BS ISO 9844...32 BS ISO 9874...32 BS ISO 10109...17, 25 BS ISO 11053...33 BS ISO 11865...33 BS ISO 11870...33 BS ISO 12078...33 BS ISO 12080...33 BS ISO 14378...34 BS ISO 15362...17, 23 BS ISO 16385...17 BS ISO 18252...34 BS ISO 18301...18 BS ISO 18333...18 BS ISO 20369...35 BS ISO 20370...35 BS ISO 20957...35 BS ISO 28198...36 DD ISO/TS 6733...32 DD ISO/TS 26844...35 PD CEN/TR 15071...19 PD CEN ISO/TR 6579...21 PD ISO/TR 8124...19 PD ISO/TS 17383...19 PD CLC/TS 50131...20 Electrotechnical BS 7452...14, 23 BS 7527...14 BS 7816...20, 23 BS EN 12645...11 BS EN ISO 14814...29 BS EN ISO 17287...30 BS EN ISO 24978...31 BS EN 50304...14 BS EN 50342...23 BS EN 50464...24 BS EN 55016...21 BS EN 60335...20, 24 BS EN 60350...14 BS EN 60674...24 BS EN 60695...21 BS EN 60721...14 BS EN 60745...15 BS EN 60794...14 BS EN 60819...24 BS EN 60825...14 BS EN 60871...14 BS EN 60958...21 BS EN 61029...24 BS EN 61260...14 BS EN 61290...14 BS EN 61300...14 BS EN 61523...24 BS EN 61558...14, 23 BS EN 61691...24 BS EN 61753...14, 15 BS EN 61837...21 BS EN 61850...15 BS EN 61970...15 BS EN 62116...15 BS EN 62148...15 BS EN 62149...15 BS EN 62196...21 BS EN 62271...20, 21, 24 BS EN 62325...15 BS EN 62520...31 BS EN 62522...15 BS EN 62572...15 BS EN 62841...15 BS EN 80416...31 DD ENV 50208...23, 25 DD ENV 50247...23 BS ISO 6469...32 BS ISO 14813...34 BS ISO 24097...35 BS IEC/IEEE 65700...18 BS IEC 62396...18, 25 DD IEC/TS 62351...20, 25 DD IEC/TS 62396...18, 25 PD IEC/TS 61244...20, 23 PD IEC/TR 61788...20 PD IEC/TS 62129...20 PD IEC/TS 62351...20, 25 PD IEC/TS 62548...20 PD IEC/TR 62681...20 PD IEC/TR 62726...20 PD IEC/TR 62778...21 PD IEC/TR 62914...20 Engineering BS 4163...10 BS 5341...26 BS 6102...16, 23 BS 6721...26 BS 7020...22 BS EN 81...10 BS EN 287...22 BS EN 327...10 BS EN 328...10 BS EN 1011...22 BS EN 1048...10 BS EN 1559...22 BS EN 1860...27 BS EN ISO 3580...27 BS EN ISO 3785...27 BS EN ISO 3907...27 BS EN ISO 3908...27 BS EN ISO 4063...27 BS EN ISO 4126...27 BS EN ISO 4490...11 BS EN ISO 6185...11 BS EN ISO 8092...27 BS EN ISO 10042...28 BS EN 10184...28 BS EN 10283...22 BS EN 10315...28 BS EN 10318...28 BS EN ISO 10517...28 BS EN ISO 12215...21 BS EN 12299...28 BS EN 12438...22 BS EN 12493...21 BS EN 12663...28 BS EN 12883...22 BS EN 12890...22 BS EN 12892...23 BS EN 13103...28 BS EN 13104...28 BS EN 13145...28 BS EN 13260...28 BS EN 13290...12, 23 BS EN ISO 13503...28 BS EN ISO 13628...28 BS EN 13674...28 BS EN 13848...28 BS EN 14093...12, 23 BS EN 14160...14, 23 BS EN 14165...12, 23 BS EN ISO 14171...29 BS EN ISO 14245...29 BS EN ISO 14341...29 BS EN ISO 14344...29 BS EN 14535...29 BS EN ISO 14555...20 BS EN 14607...14, 23 BS EN 14824...12, 23 BS EN ISO 15011...29 BS EN ISO 15463...29 BS EN ISO 15792...29 BS EN ISO 15995...29 BS EN 16500...12 BS EN 16601...12, 23 BS EN 16603...12, 14, 23 BS EN ISO 16808...14 BS EN ISO 17633...30 BS EN ISO 17666...12, 23 BS EN ISO 18274...30 BS EN ISO 21007...30 BS EN ISO 21351...12, 23 BS EN ISO 21469...30 BS EN ISO 22975...14 BS EN ISO 24034...30 BS ISO 76...31 BS ISO 702...31 BS ISO 730...21 BS ISO 2041...31 BS ISO 2599...23 BS ISO 2943...31 BS ISO 3046...31 BS ISO 3290...16 BS ISO 4008...31 BS ISO 4141...31 BS ISO 4179...31 BS ISO 4306...31 BS ISO 4378...31 BS ISO 5389...31 BS ISO 5418...32 BS ISO 5610...16 BS ISO 5775...16, 23 BS ISO 6279...32 BS ISO 6811...32 BS ISO 7588...32 BS ISO 7764...32 BS ISO 7919...32 BS ISO 8083...32 BS ISO 8528...32 BS ISO 9517...32 BS ISO 9628...32 BS ISO 9682...32 BS ISO 9683...32 BS ISO 10050...32 BS ISO 10129...33 4 Update Standards October 2014 Prices may be subject to change.

British Standards Quick Reference Guide continued... BS ISO 10643...33 BS ISO 10766...17 BS ISO 10770...33 BS ISO 10816...33 BS ISO 11158...33 BS ISO 11534...33 BS ISO 11535...33 BS ISO 11898...33 BS ISO 12151...33 BS ISO 12240...33 BS ISO 12482...17 BS ISO 13218...33 BS ISO 13555...25 BS ISO 13577...17 BS ISO 15037...34 BS ISO 15312...34 BS ISO 15348...34 BS ISO 16042...34 BS ISO 16145...17 BS ISO 16155...34 BS ISO 16183...34 BS ISO 16247...34 BS ISO 16715...17 BS ISO 16750...34 BS ISO 17325...17 BS ISO 17338...34 BS ISO 17356...34 BS ISO 17602...17 BS ISO 18422...18 BS ISO 18436...18 BS ISO 20421...35 BS ISO 20562...21 BS ISO 20703...35 BS ISO 21006...35 BS ISO 21072...35 BS ISO 21100...18, 25 BS ISO 21848...35 BS ISO 22902...35 BS ISO 22915...35 BS ISO 23551...18 BS ISO 26623...18 BS ISO 28079...35 BS ISO 30003...36 BS IEC 62705...18 DD ISO/PAS 21100...18, 25 DD ISO/TS 22559...35 DD ISO/TS 25740...35 PD CEN/TS 16635...19 PD CEN ISO/TR 16060...19, 25 PD 6604...19, 25 PD ISO/TR 11233...19 PD ISO/TR 13392...19 PD ISO/TS 13499...19 PD ISO/TS 15007...19 PD ISO/TR 15144...19 PD ISO/TS 17242...19 PD ISO/TR 18147...19 PD ISO/TS 18506...19 PD ISO/TS 18571...19 PD ISO/TS 18870...19 PD IEC/TR 62918...20 BS G 254...23 BS G 256...23 BS G 258...23 BS AU 1c...36 BS AU 180...36 BS AU 214...36 Health and environment BS 5499...10 BS 6068...26, 32 DD CEN ISO/TS 22367...35 BS EN ISO 4073...27 BS EN ISO 5667...27 BS EN ISO 6942...27 BS EN ISO 7376...27 BS EN ISO 7711...27 BS EN ISO 8362...27 BS EN ISO 8871...11, 27 BS EN ISO 9168...27 BS EN ISO 10139...28 BS EN ISO 11607...21 BS EN ISO 11979...11 BS EN ISO 12401...28 BS EN ISO 12999...20 BS EN ISO 13212...11 BS EN ISO 13982...29 BS EN ISO 15841...11 BS EN ISO 15952...29 BS EN ISO 16251...12 BS EN 16493...12 BS EN 16503...12 BS EN ISO 18857...30 BS EN ISO 20072...30 BS EN ISO 20346...14 BS EN ISO 21649...30 BS EN ISO 22112...30 BS EN ISO 23161...30 BS EN ISO 23210...30 BS EN ISO 23611...30 BS EN ISO 23753...30 BS EN ISO 25424...31 BS EN ISO 26782...31 BS EN 60601...24 BS EN 80601...25 BS EN ISO 80601...31 BS ISO 6107...32 BS ISO 8548...32 BS ISO 8551...32 BS ISO 10651...33 BS ISO 11277...33 BS ISO 12472...33 BS ISO 12913...17 BS ISO 14934...17, 25 BS ISO 15713...34 BS ISO 18227...17 BS ISO 22262...18 BS ISO 24293...35 DD ISO/TS 13498...33 DD ISO/TS 14934...17, 25 PD ISO/TR 19244...19 Information systems BS EN ISO 9409...27 BS EN ISO 12967...28 BS EN ISO 19111...30 BS EN ISO 19144...30 BS EN ISO 19439...30 BS EN 61918...15 BS ISO 2382...31 BS ISO 3334...31 BS ISO/IEC 7811...16 BS ISO/IEC 7816...32 BS ISO/IEC 8484...16 BS ISO 9564...17 BS ISO/IEC TR 9578...32 BS ISO/IEC 10118...21 BS ISO 10957...33 BS ISO/IEC 13888...34 BS ISO/IEC 14496...34 BS ISO/IEC 14977...34 BS ISO/IEC TR 15294...34 BS ISO/IEC 15459...34 BS ISO/IEC 15963...34 BS ISO/IEC 18000...34 BS ISO 18232...34 BS ISO/IEC 19792...35 BS ISO/IEC 19794...21 BS ISO/IEC 24703...35 BS ISO/IEC 24713...35 BS ISO/IEC 24727...22 BS ISO/IEC 24734...18 BS ISO 25720...35 BS ISO 28560...18 BS ISO/IEC 29109...36 PD ISO/IEC TR 29110...19 Management systems BS EN ISO 14025...29 BS EN ISO 24802...20 BS ISO 860...31 BS ISO 10002...17 BS ISO 10014...32 BS ISO 23185...35 BS ISO 24617...18 Materials and chemicals BS 2000...10, 11 BS 3056...22 BS 4140...25 BS 4993...25 BS 5050...25 BS 5072...26 BS 6783...26 DD CEN ISO/TS 16181...34 BS EN ISO 105...26, 27 BS EN ISO 844...10 BS EN 927...10 BS EN 1262...27 BS EN ISO 1456...27 BS EN 1601...10 BS EN ISO 2758...10 BS EN ISO 3167...10 BS EN ISO 3385...20 BS EN ISO 3994...10 BS EN ISO 4524...27 BS EN ISO 5163...11 BS EN ISO 8029...11 BS EN ISO 8330...11 BS EN ISO 9300...27 BS EN ISO 9856...27 BS EN ISO 9902...21 BS EN ISO 10081...22 BS EN ISO 10350...21 BS EN 12139...28 BS EN 12332...22 BS EN 12458...28 BS EN 12582...28 BS EN 12728...28 BS EN 12974...28 BS EN 13270...28 BS EN 13273...28 BS EN 13311...23 BS EN 13405...28 BS EN ISO 13479...28 BS EN 13717...28 BS EN 13926...28 BS EN ISO 13935...20 BS EN 13955...28 BS EN 13996...29 BS EN 14210...29 BS EN 14370...29 BS EN 14371...29 BS EN 14588...12, 23 BS EN 14666...29 BS EN 14667...29 BS EN 14668...29 BS EN 14669...29 BS EN 14670...29 BS EN 14712...29 BS EN 14880...29 BS EN 14881...29 BS EN ISO 15236...29 BS EN 15457...11 BS EN 15458...11 BS EN 15608...29 BS EN 15751...11 BS EN ISO 15874...20 BS EN 16476...12 BS EN 16511...12 BS EN ISO 16559...12, 23 BS EN ISO 17463...14 BS EN 20105...30 BS EN ISO 21183...30 BS ISO 368...31 BS ISO 815...15 BS ISO 1887...15 BS ISO 2470...31 BS ISO 4266...31 BS ISO 5168...31 BS ISO 5630...16 BS ISO 6939...32 BS ISO 7404...32 BS ISO 7507...32 BS ISO 9947...32 BS ISO 10059...23 BS ISO 10122...17 BS ISO 10928...33 BS ISO 11093...33 BS ISO 11433...33 BS ISO 12647...17 BS ISO 12686...33 BS ISO 13095...17 BS ISO 13320...33 BS ISO 14531...34 BS ISO 15169...34 Update Standards October 2014 Prices may be subject to change. 5

British Standards Quick Reference Guide continued... BS ISO 17499...34 BS ISO 17500...34 BS ISO 17947...17 BS ISO 18184...17 BS ISO 18352...35 BS ISO 23232...35 BS ISO 24033...23 BS ISO 24173...35 BS ISO 27448...35 BS IEC 62860...18 DD ISO/TS 10798...33 DD ISO/TS 10868...33 DD ISO/TS 80004...36 PD CEN/TS 16700...19 PD ISO/TR 18124...23 Alpha-numeric sequence of British Standards quoted in this issue BS 684...27, 29 BS 2000...10, 11 BS 3056...22 BS 4140...25 BS 4163...10 BS 4993...25 BS 5050...25 BS 5072...26 BS 5341...26 BS 5493...22 BS 5499...10 BS 5534...10 BS 6068...26, 32 BS 6102...16, 23 BS 6721...26 BS 6740...26 BS 6783...26 BS 7012...17, 23 BS 7020...22 BS 7452...14, 23 BS 7527...14 BS 7816...20, 23 BS 8892...10 BIP 2230...20 DD CEN/TS 15548...19 DD CEN ISO/TS 16181...34 DD CEN ISO/TS 22367...35 BS EN 81...10 BS EN ISO 105...26, 27 BS EN 287...22 BS EN 326...21 BS EN 327...10 BS EN 328...10 BS EN ISO 662...27 BS EN 791...11, 12, 23 BS EN ISO 844...10 BS EN 927...10 BS EN 932...20 BS EN 996...11, 12, 23 BS EN 1011...22 BS EN 1048...10 BS EN 1262...27 BS EN ISO 1456...27 BS EN 1559...22 BS EN 1601...10 BS EN 1860...27 BS EN 1873...20 BS EN 1994...20 BS EN 1996...22 BS EN ISO 2758...10 BS EN ISO 2825...27 BS EN ISO 3167...10 BS EN ISO 3218...10, 25 BS EN ISO 3385...20 BS EN ISO 3580...27 BS EN ISO 3785...27 BS EN ISO 3907...27 BS EN ISO 3908...27 BS EN ISO 3994...10 BS EN ISO 4063...27 BS EN ISO 4073...27 BS EN ISO 4126...27 BS EN ISO 4490...11 BS EN ISO 4524...27 BS EN ISO 5163...11 BS EN ISO 5667...27 BS EN ISO 6185...11 BS EN ISO 6885...27 BS EN ISO 6886...27 BS EN ISO 6942...27 BS EN ISO 7376...27 BS EN ISO 7541...27 BS EN ISO 7711...27 BS EN ISO 8029...11 BS EN ISO 8092...27 BS EN ISO 8330...11 BS EN ISO 8362...27 BS EN ISO 8871...11, 27 BS EN ISO 9168...27 BS EN ISO 9300...27 BS EN ISO 9409...27 BS EN ISO 9856...27 BS EN ISO 9902...21 BS EN ISO 9936...28 BS EN ISO 10042...28 BS EN ISO 10081...22 BS EN ISO 10139...28 BS EN 10184...28 BS EN 10283...22 BS EN 10315...28 BS EN 10318...28 BS EN ISO 10350...21 BS EN ISO 10517...28 BS EN ISO 11607...21 BS EN ISO 11979...11 BS EN 12139...28 BS EN ISO 12215...21 BS EN 12299...28 BS EN 12326...11 BS EN 12332...22 BS EN ISO 12401...28 BS EN 12438...22 BS EN 12458...28 BS EN 12493...21 BS EN 12582...28 BS EN 12645...11 BS EN 12663...28 BS EN 12728...28 BS EN 12883...22 BS EN 12890...22 BS EN 12892...23 BS EN ISO 12967...28 BS EN 12974...28 BS EN ISO 12999...20 BS EN 13103...28 BS EN 13104...28 BS EN 13145...28 BS EN ISO 13212...11 BS EN 13260...28 BS EN 13270...28 BS EN 13273...28 BS EN 13290...12, 23 BS EN 13310...23 BS EN 13311...23 BS EN 13405...28 BS EN ISO 13479...28 BS EN ISO 13503...28 BS EN ISO 13628...28 BS EN 13674...28 BS EN 13717...28 BS EN 13848...28 BS EN 13926...28 BS EN ISO 13935...20 BS EN 13955...28 BS EN ISO 13982...29 BS EN 13996...29 BS EN ISO 14025...29 BS EN 14093...12, 23 BS EN 14160...14, 23 BS EN 14165...12, 23 BS EN ISO 14171...29 BS EN 14190...11 BS EN 14210...29 BS EN ISO 14245...29 BS EN ISO 14341...29 BS EN ISO 14344...29 BS EN 14370...29 BS EN 14371...29 BS EN 14535...29 BS EN ISO 14555...20 BS EN 14588...12, 23 BS EN 14607...14, 23 BS EN 14666...29 BS EN 14667...29 BS EN 14668...29 BS EN 14669...29 BS EN 14670...29 BS EN 14712...29 BS EN ISO 14814...29 BS EN 14824...12, 23 BS EN 14880...29 BS EN 14881...29 BS EN ISO 15011...29 BS EN ISO 15236...29 BS EN 15457...11 BS EN 15458...11 BS EN ISO 15463...29 BS EN 15608...29 BS EN 15751...11 BS EN 15752...11 BS EN ISO 15753...29 BS EN 15755...11 BS EN ISO 15788...29 BS EN ISO 15792...29 BS EN ISO 15841...11 BS EN ISO 15874...20 BS EN ISO 15952...29 BS EN ISO 15995...29 BS EN 16228...11, 12, 23 BS EN ISO 16251...12 BS EN 16476...12 BS EN 16493...12 BS EN 16500...12 BS EN 16503...12 BS EN 16511...12 BS EN ISO 16559...12, 23 BS EN 16601...12, 23 BS EN 16603...12, 14, 23 BS EN ISO 16808...14 BS EN ISO 17287...30 BS EN ISO 17463...14 BS EN ISO 17633...30 BS EN ISO 17666...12, 23 BS EN ISO 18274...30 BS EN ISO 18857...30 BS EN ISO 19111...30 BS EN ISO 19144...30 BS EN ISO 19439...30 BS EN ISO 20072...30 BS EN 20105...30 BS EN ISO 20346...14 BS EN ISO 21007...30 BS EN ISO 21183...30 BS EN ISO 21351...12, 23 BS EN ISO 21415...30 BS EN ISO 21469...30 BS EN ISO 21569...30 BS EN ISO 21570...30 BS EN ISO 21571...30 BS EN ISO 21649...30 BS EN ISO 22112...30 BS EN ISO 22975...14 BS EN ISO 23161...30 BS EN ISO 23210...30 BS EN ISO 23275...30 BS EN ISO 23611...30 BS EN ISO 23753...30 BS EN ISO 24034...30 BS EN ISO 24276...30 BS EN ISO 24802...20 BS EN ISO 24978...31 BS EN ISO 25424...31 BS EN ISO 26782...31 BS EN ISO 30024...31 BS EN 50131...14, 21 BS EN 50304...14 BS EN 50342...23 BS EN 50464...24 BS EN 55016...21 BS EN 60335...20, 24 BS EN 60350...14 BS EN 60601...24 BS EN 60674...24 BS EN 60695...21 BS EN 60721...14 BS EN 60745...15 BS EN 60794...14 BS EN 60819...24 BS EN 60825...14 BS EN 60871...14 BS EN 60958...21 6 Update Standards October 2014 Prices may be subject to change.

NEW Introducing BS ISO 14046:2014 Environmental management Water footprint Principles, requirements and guidelines The issue of water and its management has become increasingly central to the global debate on sustainable development. In recent years the interest has been driven by growing water demand, increasing water scarcity in many areas and/or degradation of water quality. In order to get a better understanding of water-related impacts as a basis for improved water management at local, regional, national and global levels, we ve published a brand new standard that looks to help your organization conduct and report a water footprint assessment and identify potential environmental impacts related to water. Using BS ISO 14046 is expected to benefit organizations, governments and other interested parties worldwide by providing transparency, consistency, reproducibility and credibility for assessing and reporting the water footprint of products, processes or organizations. BS ISO 14046 will help you: Boost your company s reputation by helping you assess its water footprint and reduce environmental damage Enhance sustainability and improve resilience Decrease water usage and cut costs Improve water management locally, regionally and globally Identify the potential impacts related to water use Reliably report water footprint results This brand new standard is relevant to and should be used by sustainability and environmental managers as well as government agencies or any organization that manages water or any business that uses water for its products and processes. The standard can be used by sustainability and environmental managers, government agencies, and any business or organization that uses water for products and processes. Read more and buy shop.bsigroup.com/usbs14046 To contact us visit shop.bsigroup.com/usbs14046 or contact Customer Services quoting marketing reference code USbs14046 T +44 845 086 9001 F +44 20 8996 7001 orders@bsigroup.com shop.bsigroup.com/usbs14046 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 845 086 9001. BSI British Standards Institution 2014

Alpha-numeric Sequence of British Standards continued... BS EN 61029...24 BS EN 61260...14 BS EN 61290...14 BS EN 61300...14 BS EN 61523...24 BS EN 61558...14, 23 BS EN 61691...24 BS EN 61753...14, 15 BS EN 61837...21 BS EN 61850...15 BS EN 61918...15 BS EN 61970...15 BS EN 62116...15 BS EN 62148...15 BS EN 62149...15 BS EN 62196...21 BS EN 62271...20, 21, 24 BS EN 62325...15 BS EN 62520...31 BS EN 62522...15 BS EN 62572...15 BS EN 62841...15 BS EN 80416...31 BS EN 80601...25 BS EN ISO 80601...31 DD ENV 50208...23, 25 DD ENV 50247...23 BS ISO 76...31 BS ISO 368...31 BS ISO 702...31 BS ISO 730...21 BS ISO 815...15 BS ISO 860...31 BS ISO 1803...31 BS ISO 1871...31 BS ISO 1887...15 BS ISO 2041...31 BS ISO 2382...31 BS ISO 2470...31 BS ISO 2599...23 BS ISO 2943...31 BS ISO 3046...31 BS ISO 3218...10, 25 BS ISO 3290...16 BS ISO 3334...31 BS ISO 3976...31 BS ISO 4008...31 BS ISO 4141...31 BS ISO 4179...31 BS ISO 4266...31 BS ISO 4306...31 BS ISO 4378...31 BS ISO 4720...31 BS ISO 5168...31 BS ISO 5389...31 BS ISO 5418...32 BS ISO 5610...16 BS ISO 5630...16 BS ISO 5775...16, 23 BS ISO 6107...32 BS ISO 6279...32 BS ISO 6469...32 BS ISO 6811...32 BS ISO 6939...32 BS ISO 7404...32 BS ISO 7507...32 BS ISO 7588...32 BS ISO 7764...32 BS ISO/IEC 7811...16 BS ISO/IEC 7816...32 BS ISO 7919...32 BS ISO 8083...32 BS ISO/IEC 8484...16 BS ISO 8528...32 BS ISO 8548...32 BS ISO 8551...32 BS ISO 9517...32 BS ISO 9564...17 BS ISO/IEC TR 9578...32 BS ISO 9628...32 BS ISO 9682...32 BS ISO 9683...32 BS ISO 9844...32 BS ISO 9869...17 BS ISO 9874...32 BS ISO 9947...32 BS ISO 10002...17 BS ISO 10014...32 BS ISO 10050...32 BS ISO 10059...23 BS ISO 10109...17, 25 BS ISO/IEC 10118...21 BS ISO 10122...17 BS ISO 10129...33 BS ISO 10643...33 BS ISO 10651...33 BS ISO 10766...17 BS ISO 10770...33 BS ISO 10816...33 BS ISO 10928...33 BS ISO 10957...33 BS ISO 11053...33 BS ISO 11093...33 BS ISO 11158...33 BS ISO 11277...33 BS ISO 11433...33 BS ISO 11534...33 BS ISO 11535...33 BS ISO 11865...33 BS ISO 11870...33 BS ISO 11898...33 BS ISO 12078...33 BS ISO 12080...33 BS ISO 12151...33 BS ISO 12240...33 BS ISO 12472...33 BS ISO 12482...17 BS ISO 12647...17 BS ISO 12686...33 BS ISO 12913...17 BS ISO 13095...17 BS ISO 13218...33 BS ISO 13320...33 BS ISO 13555...25 BS ISO 13577...17 BS ISO/IEC 13888...34 BS ISO 14378...34 BS ISO 14401...34 BS ISO/IEC 14496...34 BS ISO 14531...34 BS ISO 14813...34 BS ISO 14934...17, 25 BS ISO/IEC 14977...34 BS ISO 15037...34 BS ISO 15169...34 BS ISO/IEC TR 15294...34 BS ISO 15312...34 BS ISO 15348...34 BS ISO 15362...17, 23 BS ISO/IEC 15459...34 BS ISO 15713...34 BS ISO/IEC 15963...34 BS ISO 16042...34 BS ISO 16145...17 BS ISO 16155...34 BS ISO 16183...34 BS ISO 16247...34 BS ISO 16385...17 BS ISO 16715...17 BS ISO 16750...34 BS ISO 17325...17 BS ISO 17338...34 BS ISO 17356...34 BS ISO 17499...34 BS ISO 17500...34 BS ISO 17602...17 BS ISO 17947...17 BS ISO/IEC 18000...34 BS ISO 18184...17 BS ISO 18227...17 BS ISO 18232...34 BS ISO 18252...34 BS ISO 18301...18 BS ISO 18333...18 BS ISO 18352...35 BS ISO 18422...18 BS ISO 18436...18 BS ISO/IEC 19792...35 BS ISO/IEC 19794...21 BS ISO 20369...35 BS ISO 20370...35 BS ISO 20421...35 BS ISO 20562...21 BS ISO 20703...35 BS ISO 20957...35 BS ISO 21006...35 BS ISO 21072...35 BS ISO 21100...18, 25 BS ISO 21573...18 BS ISO 21848...35 BS ISO 22262...18 BS ISO 22902...35 BS ISO 22915...35 BS ISO 23185...35 BS ISO 23232...35 BS ISO 23551...18 BS ISO 24033...23 BS ISO 24097...35 BS ISO 24173...35 BS ISO 24293...35 BS ISO 24617...18 BS ISO/IEC 24703...35 BS ISO/IEC 24713...35 BS ISO/IEC 24727...22 BS ISO/IEC 24734...18 BS ISO 25720...35 BS ISO 26623...18 BS ISO 27448...35 BS ISO 28079...35 BS ISO 28198...36 BS ISO 28560...18 BS ISO/IEC 29109...36 BS ISO 30003...36 BS IEC/IEEE 65700...18 BS IEC 62396...18, 25 BS IEC 62705...18 BS IEC 62860...18 DD ISO/PAS 21100...18, 25 DD ISO/TS 6733...32 DD ISO/TS 10798...33 DD ISO/TS 10868...33 DD ISO/TS 13498...33 DD ISO/TS 14934...17, 25 DD ISO/TS 22559...35 DD ISO/TS 25740...35 DD ISO/TS 26844...35 DD ISO/TS 80004...36 DD IEC/TS 62351...20, 25 DD IEC/TS 62396...18, 25 PD CEN/TR 15071...19 PD CEN/TS 15548...19 PD CEN/TS 16628...19 PD CEN/TS 16629...19 PD CEN/TS 16635...19 PD CEN/TS 16637...19 PD CEN/TS 16700...19 PD CEN ISO/TR 6579...21 PD CEN ISO/TR 16060...19, 25 PD 6604...19, 25 PD 6688...22 PD ISO/TR 8124...19 PD ISO/TR 11233...19 PD ISO/TR 13392...19 PD ISO/TS 13499...19 PD ISO/TS 15007...19 PD ISO/TR 15144...19 PD ISO/TR 15686...19 PD ISO/TS 17242...19 PD ISO/TS 17383...19 PD ISO/TR 18124...23 PD ISO/TR 18147...19 PD ISO/TS 18506...19 PD ISO/TS 18571...19 PD ISO/TS 18870...19 PD ISO/TR 19244...19 PD ISO/IEC TR 29110...19 PD CLC/TS 50131...20 PD IEC/TS 61244...20, 23 PD IEC/TR 61788...20 PD IEC/TS 62129...20 PD IEC/TS 62351...20, 25 PD IEC/TS 62548...20 PD IEC/TR 62681...20 PD IEC/TR 62726...20 PD IEC/TR 62778...21 PD IEC/TR 62914...20 PD IEC/TR 62918...20 BS G 254...23 BS G 256...23 BS G 258...23 BS AU 1c...36 BS AU 180...36 BS AU 214...36 8 Update Standards October 2014 Prices may be subject to change.

NEW Keep up-to-date with changes affecting medical devices regulation and standards We work hard to help you respond to the changing regulatory environment in Europe. Therefore we d like to introduce you to some new products and standards which will help you maintain certification of your systems and products, and minimize risks to conformity. Check out our new book - Implementing an ISO 13485 Quality Management System for Medical Devices by Ann Goodall, IVD Product Specialist. Get the appropriate background information and all the practically-based guidance you need to confidently tackle ISO 13485 implementation. Download our fourth free white paper What you need to know about the FDA s UDI system final rule. Taking an in-depth look to explore standardized granular identification of medical devices, associated meta-data to support various public-health initiatives and step by step guidance and advice for UDI compliance. Download our fifth free white paper - Engaging Stakeholders in the Home Medical Device Market. This paper considers the implications for manufacturers when medical devices designed for trained professionals move to community use and looks at essential issues for designing devices specifically for this growing market. Medical device standards Until the new medical devices and IVD regulation changes are implemented, the standards which underpin your regulatory strategy and conformity continue to provide the benchmark for excellence. With British Standards Online (BSOL), our online standards database, you ll have access to all harmonized and supporting standards, including: Medical devices. Quality management systems. Requirements for regulatory purposes (BS EN ISO 13485:2012) Medical devices. Application of risk management to medical devices (BS EN ISO 14971:2012) Packaging for terminally sterilized medical devices. Requirements for materials, sterile barrier systems and packaging systems (BS EN ISO 11607-1:2009) Sterilization of health-care products Ethylene oxide Requirements for the development, validation and routine control of a sterilization process for medical devices (BS EN ISO 11135:2014) Find out more at bsigroup.com/usmeddevupdates To contact us visit bsigroup.com/usmeddevupdates or contact Customer Services quoting marketing reference code USmeddevupdates T +44 845 086 9001 F +44 20 8996 7001 orders@bsigroup.com bsigroup.com/usmeddevupdates Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 845 086 9001. BSI British Standards Institution 2014

British Standards BRITISH STANDARDS The following British Standard publications are available from BSI Customer Services (see How to order on page 2). The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the British Standards withdrawn section. BRITISH STANDARD IMPLEMENTATIONS WILL BE SUPPLIED IN PREFERENCE TO EUROPEAN OR INTERNATIONAL STANDARDS, UNLESS OTHERWISE REQUESTED. Please order by the British Standard reference not the ISBN number. BS 2000 series standards are also available from: Library of the Energy Institute 61 New Cavendish Street London W1G 7AR Tel: 020 7467 7100 Fax: 020 7255 1472 Email: lis@energyinst.org.uk For this series, member pricing is applicable to BSI and Energy Institute members. BS 4163:2014 Health and safety for design and technology in educational and similar establishments. Code of practice supersedes BS 4163:2007 ISBN 978 0 580 80544 8 30.00 members, 60.00 non-members GME/27 BS 5499-10:2014 Guidance for the selection and use of safety signs and fire safety notices supersedes BS 5499-10:2006 ISBN 978 0 580 78349 4 102.00 members, 204.00 non-members PH/8/1 BS 5534:2014 Slating and tiling for pitched roofs and vertical cladding. Code of practice supersedes BS 5534:2003+A1:2010 which remains current ISBN 978 0 580 80704 6 137.00 members, 274.00 non-members B/542/1 BS 8892:2014 Transition management of facility-related services. Code of Practice ISBN 978 0 580 84104 0 102.00 members, 204.00 non-members FMW/1 BS EN PUBLICATIONS The following are British Standard implementations of the English language versions of European Standards (ENs). BSI has an obligation to publish all ENs and to withdraw any conflicting British Standards. This has led to a series of standards, BS ENs, using the EN number. Note: The date referenced in the identifier is the date of the European standard. BS EN 81-20:2014 Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods. Passenger and goods passenger lifts Together with BS EN 81-50:2014, it supersedes BS EN 81-1:1998+A3:2009 and BS EN 81-2:1998+A3:2009, which remain current ISBN 978 0 580 76414 1 137.00 members, 274.00 non-members MHE/4 BS EN 81-50:2014 Safety rules for the construction and installation of lifts. Examinations and tests. Design rules, calculations, examinations and tests of lift components Together with BS EN 81-20:2014, it supersedes BS EN 81-1:1998+A3:2009 and BS EN 81-2:1998+A3:2009, which remain current ISBN 978 0 580 76415 8 109.00 members, 218.00 non-members MHE/4 BS EN 327:2014 Heat exchangers. Forced convection air cooled refrigerant condensers. Test procedures for establishing performance supersedes BS EN 327:2000 ISBN 978 0 580 80317 8 84.00 members, 168.00 non-members RHE/30 BS EN 328:2014 Heat exchangers. Forced convection unit air coolers for refrigeration. Test procedures for establishing the performance supersedes BS EN 328:1999 ISBN 978 0 580 80318 5 96.00 members, 192.00 non-members RHE/30 BS EN ISO 844:2014 Rigid cellular plastics. Determination of compression properties supersedes BS EN ISO 844:2009 ISBN 978 0 580 69484 4 PRI/24 BS EN 927-2:2014 Paints and varnishes. Coating materials and coating systems for exterior wood. Performance specification supersedes BS EN 927-2:2006 ISBN 978 0 580 81250 7 STI/28 BS EN 1048:2014 Heat exchangers. Air cooled liquid coolers ( dry coolers ). Test procedures for establishing the performance supersedes BS EN 1048:1999 ISBN 978 0 580 80316 1 RHE/30 BS EN 1601:2014 (BS 2000-408:2014) Liquid petroleum products. Unleaded petrol. Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID) supersedes BS EN 1601:1997 ISBN 978 0 580 79135 2 15.00 members, 30.00 non-members PTI/13 Available from the Institute of Petroleum, see the British Standards section foreword for ordering information BS EN ISO 2758:2014 Paper. Determination of bursting strength supersedes BS EN ISO 2758:2003 ISBN 978 0 580 78154 4 PAI/11 BS EN ISO 3167:2014 Plastics. Multipurpose test specimens supersedes BS EN ISO 3167:2003 ISBN 978 0 580 84786 8 PRI/21 BS EN ISO 3218:2014 Essential oils. Principles of nomenclature supersedes BS ISO 3218:1976 ISBN 978 0 580 73637 7 43.00 members, 86.00 non-members AW/54 BS EN ISO 3994:2014 Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials. Specification supersedes BS EN ISO 3994:2011 ISBN 978 0 580 75108 0 PRI/66 10 Prices may be subject to change. Update Standards October 2014

BS EN ISO 4490:2014 Metallic powders. Determination of flow rate by means of a calibrated funnel (Hall flowmeter) supersedes BS EN ISO 4490:2008 ISBN 978 0 580 84787 5 43.00 members, 86.00 non-members ISE/65 BS EN ISO 5163:2014 (BS 2000-236:2014) Petroleum products. Determination of knock characteristics of motor and aviation fuels. Motor method supersedes BS EN ISO 5163:2005 ISBN 978 0 580 78674 7 15.00 members, 30.00 non-members PTI/13 Available from the Institute of Petroleum, see the British Standards section foreword for ordering information BS EN ISO 6185-3:2014 Inflatable boats. Boats with a hull length less than 8 m with a motor rating of 15 kw and greater supersedes BS EN ISO 6185-3:2001 ISBN 978 0 580 71842 7 96.00 members, 192.00 non-members GME/33 BS EN ISO 8029:2014 Plastics hose. General-purpose collapsible water hose, textile-reinforced. Specification supersedes BS EN ISO 8029:2010 ISBN 978 0 580 75110 3 PRI/66 BS EN ISO 8330:2014 Rubber and plastics hoses and hose assemblies. Vocabulary supersedes BS EN ISO 8330:2008 ISBN 978 0 580 74139 5 102.00 members, 204.00 non-members PRI/66 BS EN ISO 8871-5:2014 Elastomeric parts for parenterals and for devices for pharmaceutical use. Functional requirements and testing ISBN 978 0 580 84963 3 CH/212 BS EN ISO 11979-2:2014 Ophthalmic implants. Intraocular lenses. Optical properties and test methods supersedes BS EN ISO 11979-2:2000 ISBN 978 0 580 70881 7 84.00 members, 168.00 non-members CH/172/7 BS EN ISO 11979-7:2014 Ophthalmic implants. Intraocular lenses. Clinical investigations supersedes BS EN ISO 11979-7:2006+A1:2012 ISBN 978 0 580 70883 1 96.00 members, 192.00 non-members CH/172/7 BS EN 12326-1:2014 Slate and stone for discontinuous roofing and external cladding. Specifications for slate and carbonate slate supersedes BS EN 12326-1:2004 ISBN 978 0 580 84744 8 102.00 members, 204.00 non-members B/542 BS EN 12645:2014 Tyre pressure measuring instruments. Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles. Metrology, requirements and testing supersedes BS EN 12645:1999 ISBN 978 0 580 77218 4 84.00 members, 168.00 non-members GEL/605 BS EN ISO 13212:2014 Ophthalmic optics. Contact lens care products. Guidelines for determination of shelf-life supersedes BS EN ISO 13212:2011 ISBN 978 0 580 79722 4 CH/172/9 BS EN 14190:2014 Gypsum board products from reprocessing. Definitions, requirements and test methods supersedes BS EN 14190:2005 ISBN 978 0 580 76466 0 84.00 members, 168.00 non-members B/544 BS EN 15457:2014 Paints and varnishes. Laboratory method for testing the efficacy of film preservatives in a coating against fungi supersedes BS EN 15457:2007 ISBN 978 0 580 84804 9 STI/28 BS EN 15458:2014 Paints and varnishes. Laboratory method for testing the efficacy of film preservatives in a coating against algae supersedes BS EN 15458:2007 ISBN 978 0 580 84803 2 STI/28 BS EN 15751:2014 (BS 2000-574:2014) Automotive fuels. Fatty acid methyl ester (FAME) fuel and blends with diesel fuel. Determination of oxidation stability by accelerated oxidation method supersedes BS EN 15751:2009 ISBN 978 0 580 79994 5 15.00 members, 30.00 non-members PTI/13 Available from the Institute of Petroleum, see the British Standards section foreword for ordering information BS EN 15752-1:2014 Glass in building. Adhesive backed polymeric film. Definitions and requirements ISBN 978 0 580 83890 3 84.00 members, 168.00 non-members B/520/4 BS EN 15755-1:2014 Glass in building. Adhesive backed polymeric filmed glass. Definitions and requirements ISBN 978 0 580 83889 7 84.00 members, 168.00 non-members B/520/4 BS EN ISO 15841:2014 Dentistry. Wires for use in orthodontics supersedes BS EN ISO 15841:2006 ISBN 978 0 580 80712 1 CH/106/1 BS EN 16228-1:2014 Drilling and foundation equipment. Safety. Common requirements supersedes BS EN 791:1995+A1:2009 and BS EN 996:1995+A3:2009 ISBN 978 0 580 73264 5 137.00 members, 274.00 non-members B/513 BS EN 16228-2:2014 Drilling and foundation equipment. Safety. Mobile drill rigs for civil and geotechnical engineering, quarrying and mining supersedes BS EN 791:1995+A1:2009 and BS EN 996:1995+A3:2009 ISBN 978 0 580 73265 2 B/513 BS EN 16228-3:2014 Drilling and foundation equipment. Safety. Horizontal directional drilling equipment (HDD) supersedes BS EN 791:1995+A1:2009 and BS EN 996:1995+A3:2009 ISBN 978 0 580 73266 9 84.00 members, 168.00 non-members B/513 Update Standards October 2014 Prices may be subject to change. 11

BS EN Publications continued... BS EN 16228-4:2014 Drilling and foundation equipment. Safety. Foundation equipment supersedes BS EN 791:1995+A1:2009 and BS EN 996:1995+A3:2009 ISBN 978 0 580 73267 6 B/513 BS EN 16228-5:2014 Drilling and foundation equipment. Safety. Diaphragm walling equipment supersedes BS EN 791:1995+A1:2009 and BS EN 996:1995+A3:2009 ISBN 978 0 580 73268 3 B/513 BS EN 16228-6:2014 Drilling and foundation equipment. Safety. Jetting, grouting and injection equipment supersedes BS EN 791:1995+A1:2009 and BS EN 996:1995+A3:2009 ISBN 978 0 580 73269 0 B/513 BS EN 16228-7:2014 Drilling and foundation equipment. Safety. Interchangeable auxiliary equipment supersedes BS EN 791:1995+A1:2009 and BS EN 996:1995+A3:2009 ISBN 978 0 580 73270 6 B/513 BS EN ISO 16251-1:2014 Acoustics. Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up. Heavyweight compact floor ISBN 978 0 580 73944 6 EH/1/6 BS EN 16476:2014 Liquid petroleum products. Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel. Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) ISBN 978 0 580 79742 2 PTI/13 BS EN 16493:2014 Water quality. Nomenclatural requirements for the recording of biodiversity data, taxonomic checklists and keys ISBN 978 0 580 76680 0 EH/3/5 BS EN 16500:2014 Machines for compacting waste materials or recyclable fractions. Vertical baling presses. Safety requirements ISBN 978 0 580 80430 4 84.00 members, 168.00 non-members MCE/3/16 BS EN 16503:2014 Water quality. Guidance standard on assessing the hydromorphological features of transitional and coastal waters ISBN 978 0 580 76681 7 EH/3/5 BS EN 16511:2014 Loose-laid panels. Semi-rigid multilayer modular floor covering (MMF) panels with wear resistant top layer ISBN 978 0 580 80941 5 PRI/60 BS EN ISO 16559:2014 Solid biofuels. Terminology, definitions and descriptions supersedes BS EN 14588:2010 ISBN 978 0 580 74413 6 84.00 members, 168.00 non-members PTI/17 BS EN 16601-10-01:2014 Space project management. Organization and conduct of reviews supersedes BS EN 14093:2002 ISBN 978 0 580 83334 2 ACE/68 BS EN 16601-60:2014 Space project management. Cost and schedule management supersedes BS EN 13290-7:2001 ISBN 978 0 580 83332 8 109.00 members, 218.00 non-members ACE/68 BS EN 16601-80:2014 Space project management. Risk management supersedes BS EN ISO 17666:2003 ISBN 978 0 580 83333 5 96.00 members, 192.00 non-members ACE/68 BS EN 16603-10-03:2014 Space engineering. Testing supersedes BS EN 14824:2003 ISBN 978 0 580 83403 5 132.00 members, 264.00 non-members ACE/68 BS EN 16603-10-06:2014 Space engineering. Technical requirements specification supersedes BS EN ISO 21351:2005 ISBN 978 0 580 83405 9 84.00 members, 168.00 non-members ACE/68 BS EN 16603-20-08:2014 Space engineering. Photovoltaic assemblies and components ISBN 978 0 580 83977 1 137.00 members, 274.00 non-members ACE/68 BS EN 16603-32-01:2014 Space engineering. Fracture control supersedes BS EN 14165:2004 ISBN 978 0 580 83980 1 109.00 members, 218.00 non-members ACE/68 BS EN 16603-32-02:2014 Space engineering. Structural design and verification of pressurized hardware ISBN 978 0 580 83981 8 109.00 members, 218.00 non-members ACE/68 BS EN 16603-32-03:2014 Space engineering. Structural finite element models ISBN 978 0 580 83983 2 ACE/68 BS EN 16603-32-10:2014 Space engineering. Structural factors of safety for spaceflight hardware ISBN 978 0 580 83982 5 ACE/68 12 Update Standards October 2014 Prices may be subject to change.

British Standards Online A faster easier way to work with standards British Standards Online (BSOL) is an online database of standards. It ll help you manage standards more efficiently by giving you instant access to more than one standard for any of your projects. You ll also be able to refer to standards whilst on the move without the need to carry a paper copy. You ll have access to every standard you need and be able to create your own collection from the 60,000 available standards. Or choose from our subject-related modules and receive all the standards you need within 24 hours of subscribing. Here are five more great reasons to subscribe to BSOL now: Instant online access to standards More cost-effective than buying single copies of standards The ability to share your documents with colleagues around the business (subject to terms and conditions) Training for all users on how to use BSOL and get the most out of it Confidence you re using the latest standards with daily updates and a personalized alerting service Using BSOL will offer powerful business and marketing tools for organizations of all sizes and enable you to: Share best practices, so your organization can focus on developing better products Set benchmarks for performance, quality and safety Make technical requirements Reduce risks Reduce costs Get ahead of your competitors and make your budgets and time stretch a little further by talking to us now about a BSOL package to suit your needs. Get your no-obligation quote at shop.bsigroup.com/usbsol To contact us visit shop.bsigroup.com/usbsol or contact Customer Services quoting marketing reference code USbsol T +44 845 086 9001 F +44 20 8996 7001 orders@bsigroup.com shop.bsigroup.com/usbsol Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 845 086 9001. BSI British Standards Institution 2014

BS EN Publications continued... BS EN 16603-32-11:2014 Space engineering. Modal survey assessment ISBN 978 0 580 83985 6 109.00 members, 218.00 non-members ACE/68 BS EN 16603-32:2014 Space engineering. Structural general requirements supersedes BS EN 14607-2:2004 ISBN 978 0 580 84093 7 132.00 members, 264.00 non-members ACE/68 BS EN 16603-34:2014 Space engineering. Environmental control and life support (ECLS) ISBN 978 0 580 83986 3 102.00 members, 204.00 non-members ACE/68 BS EN 16603-40:2014 Space engineering. Software supersedes BS EN 14160:2002 ISBN 978 0 580 83979 5 137.00 members, 274.00 non-members ACE/68 BS EN ISO 16808:2014 Metallic materials. Sheet and strip. Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems ISBN 978 0 580 76890 3 84.00 members, 168.00 non-members ISE/101/2 BS EN ISO 17463:2014 Paints and varnishes. Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique ISBN 978 0 580 76589 6 STI/10 BS EN ISO 20346:2014 Personal protective equipment. Protective footwear supersedes BS EN ISO 20346:2004 ISBN 978 0 580 79385 1 84.00 members, 168.00 non-members PH/1 BS EN ISO 22975-3:2014 Solar energy. Collector components and materials. Absorber surface durability ISBN 978 0 580 75652 8 84.00 members, 168.00 non-members RHE/25 BS EN 50131-10:2014 Alarm systems. Intrusion and hold-up systems. Application specific requirements for Supervised Premises Transceiver (SPT) ISBN 978 0 580 75231 5 GW/1/2 BS EN 60350-2:2013 Household electric cooking appliances. Hobs. Methods for measuring performance supersedes BS EN 50304:2009+A1:2010 which remains current ISBN 978 0 580 73078 8 102.00 members, 204.00 non-members CPL/59 BS EN 60721-2-1:2014 (BS 7527-2-1:2014) Classification of environmental conditions. Environmental conditions appearing in nature. Temperature and Humidity supersedes BS 7527-2.1:1991 which remains current ISBN 978 0 580 72025 3 GEL/104 BS EN 60721-2-3:2014 (BS 7527-2-3:2014) Classification of environmental conditions. Environmental conditions appearing in nature. Air pressure supersedes BS 7527-2.3:1991 which remains current ISBN 978 0 580 72026 0 43.00 members, 86.00 non-members GEL/104 BS EN 60794-2-51:2014 Optical fibre cables. Indoor cables. Detail specification for simplex and duplex cables for use in cords for controlled environment ISBN 978 0 580 67423 5 GEL/86/1 BS EN 60825-1:2014 Safety of laser products. Equipment classification and requirements supersedes BS EN 60825-1:2007 ISBN 978 0 580 77969 5 116.00 members, 232.00 non-members EPL/76 BS EN 60871-1:2014 Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V. General supersedes BS EN 60871-1:2005 ISBN 978 0 580 79033 1 102.00 members, 204.00 non-members PEL/33 BS EN 61260-1:2014 Electroacoustics. Octave-band and fractionaloctave-band filters. Specifications supersedes BS EN 61260:1996 which remains current ISBN 978 0 580 61956 4 96.00 members, 192.00 non-members EPL/29 BS EN 61290-10-5:2014 Optical amplifiers. Test methods. Multichannel parameters. Distributed Raman amplifier gain and noise figure ISBN 978 0 580 80341 3 GEL/86/3 BS EN 61300-2-35:2014 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Cable nutation supersedes BS EN 61300-2-35:1997 ISBN 978 0 580 75736 5 GEL/86/2 BS EN 61558-2-10:2014 Safety of transformers, reactors, power supply units and combinations thereof. Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V supersedes BS 7452:1991 ISBN 978 0 580 74564 5 PEL/96 BS EN 61753-041-2:2014 Fibre optic interconnecting devices and passive components. Performance standard. Nonconnectorized single-mode OTDR reflecting device for category C. Controlled environment ISBN 978 0 580 75074 8 GEL/86/2 14 Update Standards October 2014 Prices may be subject to change.

BS EN 61753-053-2:2014 Fibre optic interconnecting devices and passive components. Performance standard. Nonconnectorized single-mode fibre, electrically controlled, variable optical attenuator for category C. Controlled environments ISBN 978 0 580 81741 0 GEL/86/2 BS EN 61753-071-2:2014 Fibre optic interconnecting devices and passive components. Performance standard. Nonconnectorised single-mode fibre optic 1 x 2 and 2 x 2 spatial switches for category C. Controlled environments ISBN 978 0 580 71132 9 GEL/86/2 BS EN 61850-3:2014 Communication networks and systems for power utility automation. General requirements supersedes BS EN 61850-3:2002 ISBN 978 0 580 74244 6 109.00 members, 218.00 non-members PEL/57 BS EN 61918:2013 Industrial communication networks. Installation of communication networks in industrial premises supersedes BS EN 61918:2008 ISBN 978 0 580 77747 9 137.00 members, 274.00 non-members BS EN 61970-301:2014 Energy management system application program interface (EMS-API). Common information model (CIM) base supersedes BS EN 61970-301:2013 ISBN 978 0 580 81664 2 172.00 members, 344.00 non-members PEL/57 BS EN 62116:2014 Utility-interconnected photovoltaic inverters. Test procedure of islanding prevention measures supersedes BS EN 62116:2011 which remains current ISBN 978 0 580 78759 1 GEL/82 BS EN 62148-15:2014 Fibre optic active components and devices. Package and interface standards. Discrete vertical cavity surface emitting laser packages supersedes BS EN 62148-15:2010 ISBN 978 0 580 81907 0 GEL/86/3 BS EN 62149-2:2014 Fibre optic active components and devices. Performance standards. 850 nm discrete vertical cavity surface emitting laser devices supersedes BS EN 62149-2:2009 ISBN 978 0 580 81908 7 GEL/86/3 BS EN 62149-3:2014 Fibre optic active components and devices. Performance standards. Modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40- Gbit/s fibre optic transmission systems supersedes BS EN 62149-3:2004 ISBN 978 0 580 82163 9 GEL/86/3 BS EN 62325-301:2014 Framework for energy market communications. Common Information Model (CIM) extensions for markets ISBN 978 0 580 71522 8 172.00 members, 344.00 non-members PEL/57 BS EN 62522:2014 Calibration of tuneable laser sources ISBN 978 0 580 76014 3 84.00 members, 168.00 non-members GEL/86 BS EN 62572-3:2014 Fibre optic active components and devices. Reliability standards. Laser modules used for telecommunication supersedes BS EN 62572-3:2012 ISBN 978 0 580 81909 4 GEL/86/3 BS EN 62841-2-2:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for hand-held screwdrivers and impact wrenches supersedes BS EN 60745-2-2:2010 which remains current ISBN 978 0 580 81042 8 CPL/116 BS EN 62841-2-4:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for hand-held sanders and polishers other than disc type supersedes BS EN 60745-2-4:2009+A11:2011 which remains current ISBN 978 0 580 81043 5 CPL/116 BS EN 62841-2-5:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for hand-held circular saws supersedes BS EN 60745-2-5:2010 which remains current ISBN 978 0 580 82173 8 96.00 members, 192.00 non-members CPL/116 BS IMPLEMENTATIONS BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. Note: The date referenced in the identifier is the date of the international standard. BS ISO 815-1:2014 Rubber, vulcanized or thermoplastic. Determination of compression set. At ambient or elevated temperatures supersedes BS ISO 815-1:2008 ISBN 978 0 580 78734 8 PRI/22 BS ISO 1887:2014 Textile glass. Determination of combustiblematter content supersedes BS ISO 1887:1995 ISBN 978 0 580 74660 4 43.00 members, 86.00 non-members PRI/42 Update Standards October 2014 Prices may be subject to change. 15

BS Implementations continued... BS ISO 3290-1:2014 Rolling bearings. Balls. Steel balls supersedes BS ISO 3290-1:2008 ISBN 978 0 580 77272 6 MCE/7 BS ISO 3290-2:2014 Rolling bearings. Balls. Ceramic balls supersedes BS ISO 3290-2:2008 ISBN 978 0 580 77273 3 MCE/7 BS ISO 5610-1:2014 Tool holders with rectangular shank for indexable inserts. General survey, correlation and determination of dimensions supersedes BS ISO 5610-1:2010 ISBN 978 0 580 83609 1 MTE/18 BS ISO 5610-2:2014 Tool holders with rectangular shank for indexable inserts. Style A supersedes BS ISO 5610-2:2010 ISBN 978 0 580 83610 7 MTE/18 BS ISO 5610-3:2014 Tool holders with rectangular shank for indexable inserts. Style B supersedes BS ISO 5610-3:2010 ISBN 978 0 580 83611 4 MTE/18 BS ISO 5610-4:2014 Tool holders with rectangular shank for indexable inserts. Style D supersedes BS ISO 5610-4:2010 ISBN 978 0 580 83612 1 MTE/18 BS ISO 5610-5:2014 Tool holders with rectangular shank for indexable inserts. Style F supersedes BS ISO 5610-5:2010 ISBN 978 0 580 83613 8 MTE/18 BS ISO 5610-6:2014 Tool holders with rectangular shank for indexable inserts. Style G supersedes BS ISO 5610-6:2010 ISBN 978 0 580 83614 5 MTE/18 BS ISO 5610-7:2014 Tool holders with rectangular shank for indexable inserts. Style J supersedes BS ISO 5610-7:2010 ISBN 978 0 580 83615 2 MTE/18 BS ISO 5610-8:2014 Tool holders with rectangular shank for indexable inserts. Style K supersedes BS ISO 5610-8:2010 ISBN 978 0 580 83616 9 MTE/18 BS ISO 5610-9:2014 Tool holders with rectangular shank for indexable inserts. Style L supersedes BS ISO 5610-9:2010 ISBN 978 0 580 83617 6 MTE/18 BS ISO 5610-10:2014 Tool holders with rectangular shank for indexable inserts. Style N supersedes BS ISO 5610-10:2010 ISBN 978 0 580 83618 3 MTE/18 BS ISO 5610-11:2014 Tool holders with rectangular shank for indexable inserts. Style R supersedes BS ISO 5610-11:2010 ISBN 978 0 580 83619 0 MTE/18 BS ISO 5610-12:2014 Tool holders with rectangular shank for indexable inserts. Style S supersedes BS ISO 5610-12:2010 ISBN 978 0 580 83620 6 MTE/18 BS ISO 5610-13:2014 Tool holders with rectangular shank for indexable inserts. Style T supersedes BS ISO 5610-13:2010 ISBN 978 0 580 83621 3 MTE/18 BS ISO 5610-14:2014 Tool holders with rectangular shank for indexable inserts. Style H supersedes BS ISO 5610-14:2010 ISBN 978 0 580 83622 0 MTE/18 BS ISO 5610-15:2014 Tool holders with rectangular shank for indexable inserts. Style V supersedes BS ISO 5610-15:2010 ISBN 978 0 580 83623 7 MTE/18 BS ISO 5630-7:2014 Paper and board. Accelerated ageing. Exposure to light ISBN 978 0 580 71166 4 PAI/11 BS ISO 5775-1:2014 Bicycle tyres and rims. Tyre designations and dimensions supersedes BS 6102-5:1998 ISBN 978 0 580 71499 3 GME/25 BS ISO/IEC 7811-1:2014 Identification cards. Recording technique. Embossing supersedes BS ISO/IEC 7811-1:2002 ISBN 978 0 580 80371 0 IST/17 BS ISO/IEC 7811-2:2014 Identification cards. Recording technique. Magnetic stripe. Low coercivity supersedes BS ISO/IEC 7811-2:2001 ISBN 978 0 580 80372 7 IST/17 BS ISO/IEC 8484:2014 Information technology. Magnetic stripes on savingsbooks supersedes BS ISO/IEC 8484:2007 ISBN 978 0 580 80566 0 IST/17 16 Update Standards October 2014 Prices may be subject to change.

BS ISO 9564-2:2014 Financial services. Personal Identification Number (PIN) management and security. Approved algorithms for PIN encipherment supersedes BS ISO 9564-2:2005 ISBN 978 0 580 79387 5 43.00 members, 86.00 non-members IST/12 BS ISO 9869-1:2014 Thermal insulation. Building elements. In-situ measurement of thermal resistance and thermal transmittance. Heat flow meter method ISBN 978 0 580 82178 3 96.00 members, 192.00 non-members B/540/8 BS ISO 10002:2014 Quality management. Customer satisfaction. Guidelines for complaints handling in organizations supersedes BS ISO 10002:2004 ISBN 978 0 580 85581 8 84.00 members, 168.00 non-members QS/1 BS ISO 10109:2014 Optics and photonics. Guidance for the selection of environmental tests supersedes BS ISO 10109-1:2006, BS ISO 10109-11:2001, BS ISO 10109-12:2004, BS ISO 10109-6:2005, BS ISO 10109-7:2001 and BS ISO 10109-8:2005 ISBN 978 0 580 81355 9 CPW/172 BS ISO 10122:2014 Reinforcement materials. Tubular braided sleeves. Basis for a specification ISBN 978 0 580 74665 9 PRI/42 BS ISO 10766:2014 Hydraulic fluid power. Cylinders. Housing dimensions for rectangular-section-cut bearing rings for pistons and rods supersedes BS ISO 10766:2006 ISBN 978 0 580 83603 9 MCE/11 BS ISO 12482:2014 Cranes. Monitoring for crane design working period ISBN 978 0 580 79513 8 MHE/3/11 BS ISO 12647-4:2014 Graphic technology. Process control for the production of half-tone colour separations proof and production prints. Publication gravure printing supersedes BS ISO 12647-4:2005 ISBN 978 0 580 76450 9 PAI/43 BS ISO 12913-1:2014 Acoustics. Soundscape. Definition and conceptual framework ISBN 978 0 580 78309 8 EH/1/3 BS ISO 13095:2014 Surface Chemical Analysis. Atomic force microscopy. Procedure for in situ characterization of AFM probe shank profile used for nanostructure measurement ISBN 978 0 580 67752 6 84.00 members, 168.00 non-members CII/60 BS ISO 13577-4:2014 Industrial furnace and associated processing equipment. Safety. Protective systems ISBN 978 0 580 87031 6 109.00 members, 218.00 non-members RHE/13 BS ISO 14934-4:2014 Fire tests. Calibration and use of heat flux meters. Guidance on the use of heat flux meters in fire tests supersedes DD ISO/TS 14934-4:2007 ISBN 978 0 580 82022 9 FSH/21/-/5 BS ISO 15362:2014 Stereomicroscopes. Information provided to the user supersedes BS 7012-10.4:1998 ISBN 978 0 580 84505 5 43.00 members, 86.00 non-members CPW/172 BS ISO 16145-5:2014 Ships and marine technology. Protective coatings and inspection method. Assessment method for coating damages ISBN 978 0 580 80725 1 SME/32/-/8 BS ISO 16385:2014 Essential oil of molle (Schinus areira L.), Argentinean type ISBN 978 0 580 82020 5 AW/54 BS ISO 16715:2014 Cranes. Hand signals used with cranes ISBN 978 0 580 78928 1 MHE/3/11 BS ISO 17325-1:2014 Ships and marine technology. Marine environment protection. Oil booms. Design requirements ISBN 978 0 580 79516 9 SME/32/-/2 BS ISO 17602:2014 Ships and marine technology. Metal valves for use in flanged pipe. Face-to-face and centre-toface dimensions ISBN 978 0 580 80665 0 SME/32/-/3 BS ISO 17947:2014 Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of fine silicon nitride powders ISBN 978 0 580 78553 5 84.00 members, 168.00 non-members RPI/13 BS ISO 18184:2014 Textiles. Determination of antiviral activity of textile products ISBN 978 0 580 79901 3 102.00 members, 204.00 non-members TCI/80 BS ISO 18227:2014 Soil quality. Determination of elemental composition by X-ray fluorescence ISBN 978 0 580 80816 6 96.00 members, 192.00 non-members EH/4 Update Standards October 2014 Prices may be subject to change. 17

BS Implementations continued... BS ISO 18301:2014 Animal and vegetable fats and oils. Determination of conventional mass per volume (litre weight in air). Oscillating U-tube method ISBN 978 0 580 80493 9 AW/307 BS ISO 18333:2014 Pallets for materials handling. Quality of new wooden components for flat pallets supersedes BS ISO 18333:2002 ISBN 978 0 580 80182 2 PKW/0/-/11 BS ISO 18422:2014 Ships and marine technology. Inland navigation vessels. Plate with instructions for rescue, resuscitation and first aid for drowning persons ISBN 978 0 580 81399 3 SME/32/-/11 BS ISO 18436-2:2014 Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel. Vibration condition monitoring and diagnostics supersedes BS ISO 18436-2:2003 ISBN 978 0 580 66383 3 96.00 members, 192.00 non-members GME/21/7 BS ISO 21100:2014 Air cargo unit load devices. Performance requirements and test parameters supersedes DD ISO/PAS 21100:2011 ISBN 978 0 580 82542 2 102.00 members, 204.00 non-members ACE/57 Help Us to Help You! Always quote your Customer Number Don t know your number? Contact Customer Services 020 8996 9001 who will be happy to check it for you BS ISO 21573-1:2014 Building construction machinery and equipment. Concrete pumps. Terminology and commercial specifications ISBN 978 0 580 86198 7 B/513 BS ISO 22262-2:2014 Air quality. Bulk materials. Quantitative determination of asbestos by gravimetric and microscopical methods ISBN 978 0 580 76241 3 102.00 members, 204.00 non-members EH/2/3 BS ISO 23551-6:2014 Safety and control devices for gas burners and gas-burning appliances. Particular requirements. Thermoelectric flame supervision controls ISBN 978 0 580 79573 2 GSE/22 BS ISO 24617-4:2014 Language resource management. Semantic annotation framework (SemAF). Semantic roles (SemAF-SR) ISBN 978 0 580 73557 8 102.00 members, 204.00 non-members TS/1 BS ISO/IEC 24734:2014 Information technology. Office equipment. Method for measuring digital printing productivity supersedes BS ISO/IEC 24734:2009 ISBN 978 0 580 82703 7 102.00 members, 204.00 non-members IST/3 BS ISO 26623-1:2014 Polygonal taper interface with flange contact surface. Dimensions and designation of shanks supersedes BS ISO 26623-1:2008 ISBN 978 0 580 81564 5 MTE/18 BS ISO 26623-2:2014 Polygonal taper interface with flange contact surface. Dimensions and designation of receivers supersedes BS ISO 26623-2:2008 ISBN 978 0 580 81565 2 43.00 members, 86.00 non-members MTE/18 BS ISO 28560-1:2014 Information and documentation. RFID in libraries. Data elements and general guidelines for implementation supersedes BS ISO 28560-1:2011 ISBN 978 0 580 84881 0 84.00 members, 168.00 non-members IDT/2/7 BS ISO 28560-2:2014 Information and documentation. RFID in libraries. Encoding of RFID data elements based on rules from ISO/IEC 15962 supersedes BS ISO 28560-2:2011 ISBN 978 0 580 84882 7 102.00 members, 204.00 non-members IDT/2/7 BS ISO 28560-3:2014 Information and documentation. RFID in libraries. Fixed length encoding supersedes BS ISO 28560-3:2011 ISBN 978 0 580 84883 4 84.00 members, 168.00 non-members IDT/2/7 BS IEC 62396-2:2012 Process management for avionics. Atmospheric radiation effects. Guidelines for single event effects testing for avionics systems supersedes DD IEC/TS 62396-2:2008 ISBN 978 0 580 77434 8 84.00 members, 168.00 non-members GEL/107 BS IEC 62396-5:2014 Process management for avionics. Atmospheric radiation effects. Assessment of thermal neutron fluxes and single event effects in avionics systems supersedes DD IEC/TS 62396-5:2008 ISBN 978 0 580 84550 5 GEL/107 BS IEC 62705:2014 Nuclear power plants. Instrumentation and control important to safety. Radiation monitoring systems (RMS): Characteristics and lifecycle ISBN 978 0 580 75983 3 NCE/8 BS IEC 62860-1:2013 Test methods for the characterization of organic transistor-based ring oscillators ISBN 978 0 580 85646 4 NTI/1 BS IEC 62860:2013 Test methods for the characterization of organic transistors and materials ISBN 978 0 580 82727 3 NTI/1 BS IEC/IEEE 65700-19-03:2014 Bushings for DC application ISBN 978 0 580 75606 1 102.00 members, 204.00 non-members PEL/36 18 Update Standards October 2014 Prices may be subject to change.

PUBLISHED DOCUMENTS PD ISO/TR 8124-8:2014 Safety of toys. Age determination guidelines ISBN 978 0 580 82374 9 84.00 members, 168.00 non-members CW/15 PD ISO/TR 11233:2014 Space systems. Orbit determination and estimation. Process for describing techniques ISBN 978 0 580 65882 2 ACE/68/-/3 PD ISO/TR 13392:2014 Health and safety in welding and allied processes. Arc welding fume components ISBN 978 0 580 86903 7 43.00 members, 86.00 non-members WEE/40 PD ISO/TS 13499:2014 Road vehicles. Multimedia data exchange format for impact tests ISBN 978 0 580 84347 1 AUE/7 PD ISO/TS 15007-2:2014 Road vehicles. Measurement of driver visual behaviour with respect to transport information and control systems. Equipment and procedures ISBN 978 0 580 73099 3 AUE/12 PD CEN/TR 15071:2014 Safety of toys. National translations of warnings and instructions for use in EN 71 series supersedes PD CEN/TR 15071:2005 ISBN 978 0 580 85798 0 137.00 members, 274.00 non-members CW/15 PD ISO/TR 15144-1:2014 Calculation of micropitting load capacity of cylindrical spur and helical gears. Introduction and basic principles supersedes PD ISO/TR 15144-1:2010 ISBN 978 0 580 83309 0 96.00 members, 192.00 non-members MCE/5/-/15 PD CEN/TS 15548-1:2014 Thermal insulation products for building equipment and industrial installations. Determination of thermal resistance by means of the guarded hot plate method. Measurements at elevated temperatures from 100ºC to 850ºC supersedes DD CEN/TS 15548-1:2011 ISBN 978 0 580 83310 6 B/540 PD ISO/TR 15686-11:2014 Buildings and constructed assets. Service life planning. Terminology ISBN 978 0 580 73852 4 84.00 members, 168.00 non-members CB/101 PD CEN ISO/TR 16060:2014 Destructive tests on welds in metallic materials. Etchants for macroscopic and microscopic examination supersedes PD 6604:1997 ISBN 978 0 580 85861 1 84.00 members, 168.00 non-members WEE/2 PD CEN/TS 16628:2014 Energy Performance of Buildings. Basic Principles for the set of EPB standards ISBN 978 0 580 82982 6 84.00 members, 168.00 non-members B/540/2 PD CEN/TS 16629:2014 Energy Performance of Buildings. Detailed Technical Rules for the set of EPB-standards ISBN 978 0 580 82983 3 84.00 members, 168.00 non-members B/540/2 PD CEN/TS 16635:2014 Railway application. Design for PRM Use. Equipment and Components onboard Rolling Stock. Toilets ISBN 978 0 580 83047 1 RAE/1/-/15 PD CEN/TS 16637-1:2014 Construction products. Assessment of release of dangerous substances. Guidance for the determination of leaching tests and additional testing steps ISBN 978 0 580 57319 4 102.00 members, 204.00 non-members B/557 PD CEN/TS 16637-2:2014 Construction products. Assessment of release of dangerous substances. Horizontal dynamic surface leaching test ISBN 978 0 580 57320 0 102.00 members, 204.00 non-members B/557 PD CEN/TS 16700:2014 Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of resistance to impact of a coating on a wooden substrate ISBN 978 0 580 84745 5 STI/28 PD ISO/TS 17242:2014 Quasi-static calibration procedure for belt force transducers ISBN 978 0 580 84335 8 AUE/7 PD ISO/TS 17383:2014 Determination of the triacylglycerol composition of fats and oils. Determination by capillary gas chromatography ISBN 978 0 580 76803 3 AW/307 PD ISO/TR 18147:2014 Space environment (natural and artificial). Method of the solar energetic protons fluences and peak fluxes determination ISBN 978 0 580 83602 2 ACE/68/-/4 PD ISO/TS 18506:2014 Procedure to construct injury risk curves for the evaluation of road user protection in crash tests ISBN 978 0 580 83771 5 AUE/7 PD ISO/TS 18571:2014 Road vehicles. Objective rating metric for nonambiguous signals ISBN 978 0 580 82290 2 109.00 members, 218.00 non-members AUE/15 PD ISO/TS 18870:2014 Lifts (elevators). Requirements for lifts used to assist in building evacuation ISBN 978 0 580 85218 3 MHE/4 PD ISO/TR 19244:2014 Guidance on transition periods for standards developed by ISO/TC 84. Devices for administration of medicinal products and catheters ISBN 978 0 580 83514 8 43.00 members, 86.00 non-members CH/84 PD ISO/IEC TR 29110-5-6-2:2014 Systems and software engineering. Lifecycle profiles for Very Small Entities (VSEs). Systems engineering. Management and engineering guide: Generic profile group: Basic profile ISBN 978 0 580 81817 2 109.00 members, 218.00 non-members IST/15 Update Standards October 2014 Prices may be subject to change. 19

Published Documents continued... PD CLC/TS 50131-11:2012 Alarm systems. Intrusion and hold-up systems. Hold-up devices ISBN 978 0 580 83565 0 96.00 members, 192.00 non-members GW/1/1 PD IEC/TS 61244-2:2014 Determination of long-term radiation ageing in polymers. Procedures for predicting ageing at low dose rates supersedes BS 7816-2:1997 ISBN 978 0 580 85144 5 84.00 members, 168.00 non-members GEL/112 PD IEC/TR 61788-20:2014 Superconductivity. Superconducting wires. Categories of practical superconducting wires. General characteristics and guidance ISBN 978 0 580 87161 0 L/-/90 PD IEC/TS 62129-3:2014 Calibration of wavelength/optical frequency measurement instruments. Optical frequency meters using optical frequency combs ISBN 978 0 580 84250 4 GEL/86 PD IEC/TS 62351-5:2013 Power systems management and associated information exchange. Data and communications security. Security for IEC 60870-5 and derivatives supersedes DD IEC/TS 62351-5:2009 ISBN 978 0 580 78904 5 116.00 members, 232.00 non-members PEL/57 PD IEC/TS 62548:2013 Photovoltaic (PV) arrays. Design requirements ISBN 978 0 580 62010 2 102.00 members, 204.00 non-members GEL/82 PD IEC/TR 62681:2014 Electromagnetic performance of high voltage direct current (HVDC) overhead transmission lines ISBN 978 0 580 71923 3 109.00 members, 218.00 non-members PEL/22 PD IEC/TR 62726:2014 Guidance on quantifying greenhouse gas emission reductions from the baseline for electrical and electronic products and systems ISBN 978 0 580 85647 1 102.00 members, 204.00 non-members GEL/111 PD IEC/TR 62914:2014 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Experimental procedure for the forced internal short-circuit test of IEC 62133:2012 ISBN 978 0 580 85992 2 PEL/21/1 PD IEC/TR 62918:2014 Nuclear power plants. Instrumentation and control important to safety. Use and selection of wireless devices to be integrated in systems important to safety ISBN 978 0 580 85816 1 109.00 members, 218.00 non-members NCE/8 SPECIALIST BOOKS FROM BSI BIP 2230:2014 Energy Audits. The key to delivering real energy reductions ISBN 978 0 580 82247 6 45.00 members, 45.00 non-members CORRIGENDA TO BRITISH STANDARDS Most amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is reissued (see Updated British Standards ). British Standards which have been corrected via corrigenda are available on request, free of charge to past purchasers of the standard. All amendments and corrigenda to date of despatch are included within any main publication when ordered for the first time. The following corrigenda to British Standards were made available last month. BS EN 932-5:2012 Tests for general properties of aggregates. Common equipment and calibration CORRIGENDUM 1 B/502 BS EN 1873:2014 Prefabricated accessories for roofing. Individual rooflights of plastics. Product specification and test methods CORRIGENDUM 1 B/542/8 BS EN 1994-1-2:2005+A1:2014 Eurocode 4. Design of composite steel and concrete structures. General rules. Structural fire design CORRIGENDUM 2 B/525/4 BS EN ISO 3385:2014 Flexible cellular polymeric materials. Determination of fatigue by constant-load pounding CORRIGENDUM 1 PRI/24 BS EN ISO 12999-1:2014 Acoustics. Determination and application of measurement uncertainties in building acoustics. Sound insulation CORRIGENDUM 1 EH/1/6 BS EN ISO 13935-1:2014 Textiles. Seam tensile properties of fabrics and made-up textile articles. Determination of maximum force to seam rupture using the strip method CORRIGENDUM 1 TCI/24 BS EN ISO 14555:2014 Welding. Arc stud welding of metallic materials CORRIGENDUM 1 WEE/-/1 BS EN ISO 15874-5:2013 Plastics piping systems for hot and cold water installations. Polypropylene (PP). Fitness for purpose of the system CORRIGENDUM 1 PRI/88/2 BS EN ISO 24802-1:2014 Recreational diving services. Requirements for the training of scuba instructors. Level 1 CORRIGENDUM 1 SVS/2/4 BS EN 60335-2-76:2005+A12:2010 Household and similar electrical appliances. Safety. Particular requirements for electric fence energizers CORRIGENDUM 4 CPL/61/1 BS EN 62271-102:2002+A2:2013 High-voltage switchgear and controlgear. Alternating current disconnectors and earthing switches CORRIGENDUM 5 PEL/17/1 20 Update Standards October 2014 Prices may be subject to change.

BS EN 62271-106:2011 High-voltage switchgear and controlgear. Alternating current contactors, contactor-based controllers and motor-starters CORRIGENDUM 1 PEL/17/1 PD CEN ISO/TR 6579-3:2014 Microbiology of the food chain. Horizontal method for the detection, enumeration and serotyping of Salmonella. Guidelines for serotyping of Salmonella spp. CORRIGENDUM 1 AW/9 BS ISO/IEC 10118-4:1998 Information technology. Security techniques. Hash-functions. Hash-functions using modular arithmetic CORRIGENDUM 1 IST/33 BS ISO 20562:2014 Tyre valves. ISO core chambers No. 1, No. 2, No. 3 and No. 4 CORRIGENDUM 2 AUE/4 PD IEC/TR 62778:2014 Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires CORRIGENDUM 1 CPL/34/1 NA+A1:2014 to BS EN 1991-1- 7:2006+A1:2014 National Annex to Eurocode 1. Actions on structures. Accidental actions CORRIGENDUM 1 B/525/1 UPDATED BRITISH STANDARDS The following standards have been amended and the amendments have been incorporated into an updated standard. NOTE: Updated British Standards must be reordered as the amendments are not available separately. BS EN 326-2:2010+A1:2014 Wood-based panels. Sampling, cutting and inspection. Initial type testing and factory production control AMENDMENT 1 96.00 members, 192.00 non-members B/541 BS EN ISO 9902-1:2001+A2:2014 Textile machinery. Noise test code. Common requirements AMENDMENT 2 84.00 members, 168.00 non-members TCI/33 BS EN ISO 9902-3:2001+A2:2014 Textile machinery. Noise test code. Nonwoven machinery AMENDMENT 2 TCI/33 BS EN ISO 9902-5:2001+A2:2014 Textile machinery. Noise test code. Weaving and knitting preparatory machinery AMENDMENT 2 TCI/33 BS EN ISO 10350-1:2008+A1:2014 Plastics. Acquisition and presentation of comparable single-point data. Moulding materials AMENDMENT 1 PRI/21 BS EN ISO 11607-1:2009+A1:2014 Packaging for terminally sterilized medical devices. Requirements for materials, sterile barrier systems and packaging systems AMENDMENT 1 84.00 members, 168.00 non-members CH/198 BS EN ISO 12215-5:2008+A1:2014 Small craft. Hull construction and scantlings. Design pressures for monohulls, design stresses, scantlings determination AMENDMENT 1 116.00 members, 232.00 non-members GME/33 BS EN 12493:2013+A1:2014 LPG equipment and accessories. Welded steel pressure vessels for LPG road tankers. Design and manufacture AMENDMENT 1 102.00 members, 204.00 non-members PVE/19 BS EN 50131-2-7-1:2012+A1:2013 Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Glass break detectors (acoustic) AMENDMENT 1 96.00 members, 192.00 non-members GW/1/1 BS EN 55016-2-3:2010+A2:2014 Specification for radio disturbance and immunity measuring apparatus and methods. Methods of measurement of disturbances and immunity. Radiated disturbance measurements AMENDMENT 2 116.00 members, 232.00 non-members GEL/210/12 BS EN 60695-2-12:2010+A1:2014 Fire hazard testing. Glowing/hot-wire based test methods. Glow-wire flammability index (GWFI) test method for materials AMENDMENT 1 GEL/89 BS EN 60958-1:2008+A1:2014 Digital audio interface. General AMENDMENT 1 84.00 members, 168.00 non-members EPL/100 BS EN 61837-2:2011+A1:2014 Surface mounted piezoelectric devices for frequency control and selection. Standard outlines and terminal lead connections. Ceramic enclosures AMENDMENT 1 109.00 members, 218.00 non-members EPL/48 BS EN 62196-2:2012+A12:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories AMENDMENT 12 102.00 members, 204.00 non-members PEL/23/4 BS ISO 730:2009+A1:2014 Agricultural wheeled tractors. Rear-mounted three-point linkage. Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4 AMENDMENT 1 AGE/6 BS ISO/IEC 19794-11:2013+A1:2014 Information technology. Biometric data interchange formats. Signature/sign processed dynamic data AMENDMENT 1 102.00 members, 204.00 non-members IST/44 Update Standards October 2014 Prices may be subject to change. 21

Updated British Standards continued... BS ISO/IEC 24727-3:2008+A1:2014 Identification cards. Integrated circuit card programming interfaces. Application interface AMENDMENT 1 172.00 members, 344.00 non-members IST/17 PD 6688-1-7:2009+A1:2014 Recommendations for the design of structures to BS EN 1991-1-7 AMENDMENT 1 B/525/1 NA+A1:2014 to BS EN 1996-3:2006 UK National Annex to Eurocode 6. Design of masonry structures. Simplified calculation methods for unreinforced masonry structures AMENDMENT 1 43.00 members, 86.00 non-members B/525/6 BRITISH STANDARDS PROPOSED FOR CONFIRMATION It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Circumstances may lead to an earlier review. Confirmation indicates the continuing currency of a standard. A note of any objections to the proposals below should be sent to Debbie Stead, Head of Committee Service Centre and International Secretariat, BSI Group, 389 Chiswick High Road, London W4 4AL or via email to BSUKoperations.review@bsigroup.com by 30 November, 2014. BS 5493:1977 Code of practice for protective coating of iron and steel structures against corrosion B/209 To order visit www.bsigroup.com/shop BRITISH STANDARDS REVIEWED AND CONFIRMED It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action. Confirmation indicates the continuing currency of a standard. Where any standard in this list has been amended since publication, confirmation includes all amendments published to date. Reference to a particular amendment indicates that it is published concurrently with the confirmation. BS 3056-4:1985 (ISO 5019-4:1984) Sizes of refractory bricks. Specification for bricks for electric arc furnace roofs RPI/1 BS 7020-3:1988 (ISO 7335:1987) Analysis of iron ores. Method for the determination of combined water content ISE/58 BS 7020-5.1:1993 (ISO 2598-1:1992) Analysis of iron ores. Methods for the determination of silicon content. Gravimetric methods ISE/58 BS 7020-5.2:1993 (ISO 2598-2:1992) Analysis of iron ores. Methods for the determination of silicon content. Reduced molybdosilicate spectrophotometric method ISE/58 BS 7020-6.2:1993 (ISO 4687-1:1992) Analysis of iron ores. Methods for the determination of phosphorus content. Molybdenum blue spectrophotometric method ISE/58 BS 7020-13:1988 (ISO 7834:1987) Analysis of iron ores. Method for the determination of arsenic content. Spectrophotometric method ISE/58 BS 7020-19:1988 (ISO 4694:1987) Analysis of iron ores. Method for the determination of fluorine content. Ion-selective electrode method ISE/58 BS EN 287-6:2010 Qualification test of welders. Fusion welding. Cast iron ISE/111 BS EN 1011-8:2004 Welding. Recommendations for welding of metallic materials. Welding of cast irons ISE/111 BS EN 1559-5:1998 Founding. Technical conditions of delivery. Additional requirements for magnesium alloy castings ISE/111 BS EN ISO 10081-1:2005 Classification of dense shaped refractory products. Alumina-silica RPI/1 BS EN ISO 10081-2:2005 Classification of dense shaped refractory products. Basic products containing less than 7 % residual carbon RPI/1 BS EN ISO 10081-3:2005 Classification of dense shaped refractory products. Basic products containing from 7% to 50% residual carbon RPI/1 BS EN 10283:2010 Corrosion resistant steel castings ISE/111 BS EN 12332-1:1999 Rubber- or plastics-coated fabrics. Determination of bursting strength. Steel ball method TCI/69 BS EN 12438:1998 Magnesium and magnesium alloys. Magnesium alloys for cast anodes NFE/35 BS EN 12883:2000 Founding. Equipment for the production of lost patterns for the lost wax casting process ISE/111 BS EN 12890:2000 Founding. Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores ISE/111 22 Update Standards October 2014 Prices may be subject to change.

BS EN 12892:2000 Founding. Equipment for the production of lost patterns for the lost foam casting process ISE/111 BS EN 13310:2003 Kitchen sinks. Functional requirements and test methods B/503 BS EN 13311-1:2001 Biotechnology. Performance criteria for vessels. General performance criteria CII/58 BS ISO 2599:2003 Iron ores. Determination of phosphorus content. Titrimetric method ISE/58 BS ISO 10059-2:2003 Dense shaped refractory materials. Determination of cold compressive strength. Test with packing RPI/1 PD ISO/TR 18124:2006 Plastics piping systems. Multilayer M (metal) pipes. Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone PRI/88/4 BS ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes. Effect of time and temperature on the expected strength PRI/88/4 BS G 254:1994 (ISO 8668-4:1993) Specification for type 2 terminal junction systems ACE/6 BS G 256:1995 (ISO 8668-6:1994) Specification for type 4 terminal junction systems ACE/6 BS G 258:1995 (ISO 8815:1994) Glossary of terms for electrical cables and cable harnesses ACE/6 BRITISH STANDARDS WITHDRAWN If any standard in this list has been amended since publication, all amendments published to date are also withdrawn BS 6102-5:1998 (ISO 5775-1:1997) Cycles. Specification for bicycle tyre designations and dimensions GME/25 Superseded by BS ISO 5775-1:2014 BS 7012-10.4:1998 (ISO 15362:1998) Light microscopes. Minimum requirements for stereo microscopes. Information provided to the user CPW/172 Superseded by BS ISO 15362:2014 BS 7452:1991 (IEC 60989:1991) Specification for separating transformers, autotransformers, variable transformers and reactors PEL/96 Superseded by BS EN 61558-2-10:2014 BS 7816-2:1997 (IEC 61244-2:1996) Determination of long-term radiation ageing in polymers. Procedures for predicting ageing at low dose rates GEL/15 Superseded by PD IEC/TS 61244-2:2014 BS EN 791:1995+A1:2009 Drill rigs. Safety B/513/-/2 Superseded by BS EN 16228-1:2014, BS EN 16228-2:2014, BS EN 16228-3:2014, BS EN 16228-4:2014, BS EN 16228-5:2014, BS EN 16228-6:2014 and BS EN 16228-7:2014 BS EN 996:1995+A3:2009 Piling equipment. Safety requirements B/513 Superseded by BS EN 16228-1:2014, BS EN 16228-2:2014, BS EN 16228-3:2014, BS EN 16228-4:2014, BS EN 16228-5:2014, BS EN 16228-6:2014 and BS EN 16228-7:2014 BS EN 13290-7:2001 Space project management. General requirements. Cost and schedule management ACE/68 Superseded by BS EN 16601-60:2014 BS EN 14093:2002 Space project management. Organization and conduct of reviews ACE/68 Superseded by BS EN 16601-10-01:2014 BS EN 14160:2002 Space engineering. Software ACE/68 Superseded by BS EN 16603-40:2014 BS EN 14165:2004 Space engineering standards. Fracture control ACE/68/-/6 Superseded by BS EN 16603-32-01:2014 BS EN 14588:2010 Solid biofuels. Terminology, definitions and descriptions PTI/17 Superseded by BS EN ISO 16559:2014 BS EN 14607-2:2004 Space engineering. Mechanical. Structural ACE/68 Superseded by BS EN 16603-32:2014 BS EN 14824:2003 Space engineering. Testing ACE/68/-/6 Superseded by BS EN 16603-10-03:2014 BS EN ISO 17666:2003 Space systems. Risk management ACE/68 Superseded by BS EN 16601-80:2014 BS EN ISO 21351:2005 Space systems. Functional and technical specifications ACE/68 Superseded by BS EN 16603-10-06:2014 DD ENV 50208-6:1998 Data interchange format for simulated and measured data (ISMD) GEL/93 This standard is withdrawn as the corresponding European standard has been withdrawn by CENELEC DD ENV 50247-1:1999 Pinnacles Component Information Standard 1.2. The PCIS tag library GEL/93 This standard is withdrawn as the corresponding European standard has been withdrawn by CENELEC DD ENV 50247-2:2000 Pinnacles Component Information Standard 1.2. The SGML declaration and SGML document type definitions (DTDs) GEL/93 This standard is withdrawn as the corresponding European standard has been withdrawn by CENELEC BS EN 50342-1:2006 Lead-acid starter batteries. General requirements and methods of test PEL/21 Superseded by BS EN 50342-1:2006+A1:2011 Update Standards October 2014 Prices may be subject to change. 23

British Standards Withdrawn continued... BS EN 50464-1:2007 Three-phase oil-immersed distribution transformers 50 Hz, from 50 kva to 2500 kva with highest voltage for equipment not exceeding 36 kv. General requirements PEL/14 Superseded by BS EN 50464-1:2007+A1:2012 BS EN 60335-2-16:2003+A1:2008 Household and similar electrical appliances. Safety. Particular requirements for food waste disposers CPL/61/01 Superseded by BS EN 60335-2-16:2003+A2:2012 BS EN 60335-2-51:2003+A1:2008 Household and similar electrical appliances. Safety. Particular requirements for stationary circulation pumps for heating and service water installations CPL/61/01 Superseded by BS EN 60335-2-51:2003+A2:2012 BS EN 60335-2-59:2003 Household and similar electrical appliances. Safety. Particular requirements for insect killers CPL/61/01 Superseded by BS EN 60335-2-59:2003+A2:2009 BS EN 60335-2-66:2003+A1:2008 Household and similar electrical appliances. Safety. Particular requirements for water-bed heaters CPL/61/07 Superseded by BS EN 60335-2-66:2003+A2:2012 BS EN 60335-2-73:2003 Specification for safety of household and similar electrical appliances. Particular requirements for fixed immersion heaters CPL/61/07 Superseded by BS EN 60335-2-73:2003+A2:2009 BS EN 60335-2-74:2003 Household and similar electrical appliances. Safety. Particular requirements for portable immersion heaters CPL/61/07 Superseded by BS EN 60335-2-74:2003+A2:2009 BS EN 60335-2-81:2003 Household and similar electrical appliances. Safety. Particular requirements for foot warmers and heating mats CPL/61/07 Superseded by BS EN 60335-2-81:2003+A2:2012 BS EN 60601-1:2006 Medical electrical equipment. General requirements for basic safety and essential performance CH/62/1 Superseded by BS EN 60601-1:2006+A11:2011 BS EN 60601-2-2:2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories CH/62/4 Superseded by BS EN 60601-2-2:2009+A11:2011 BS EN 60601-2-19:2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of infant incubators CH/62/4 Superseded by BS EN 60601-2-19:2009+A11:2011 BS EN 60601-2-20:2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of infant transport incubators CH/62/4 Superseded by BS EN 60601-2-20:2009+A11:2011 BS EN 60601-2-21:2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of infant radiant warmers CH/62/4 Superseded by BS EN 60601-2-21:2009+A11:2011 BS EN 60601-2-29:2008 Medical electrical equipment. Particular requirements for the basic safety and essential performance of radiotherapy simulators CH/62/4 Superseded by BS EN 60601-2-29:2008+A11:2011 BS EN 60601-2-33:2010 Medical electrical equipment. Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis CH/62/4 Superseded by BS EN 60601-2-33:2010+A11:2011 BS EN 60601-2-37:2008 Medical electrical equipment. Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment CH/62/2 Superseded by BS EN 60601-2-37:2008+A11:2011 BS EN 60601-2-41:2009 Medical electrical equipment. Particular requirements for basic safety and essential performance of surgical luminaires and luminaires for diagnosis CH/62/4 Superseded by BS EN 60601-2-41:2009+A11:2011 BS EN 60601-2-50:2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of infant phototherapy equipment CH/62/4 Superseded by BS EN 60601-2-50:2009+A11:2011 BS EN 60674-3-1:1998 Specification for plastic films for electrical purposes. Specifications for individual materials. Biaxially oriented polypropylene (PP) films for capacitors GEL/15 Superseded by BS EN 60674-3-1:1998+A1:2011 BS EN 60819-3-3:2006 Non-cellulosic papers for electrical purposes. Specifications for individual materials. Unfilled aramid (aromatic polyamide) papers GEL/15 Superseded by BS EN 60819-3-3:2011 BS EN 61029-2-5:2002 Safety of transportable motor-operated tools. Particular requirements for band saws CPL/116 Superseded by BS EN 61029-2-5:2011 BS EN 61523-2:2002 Delay and power calculation standards. Prelayout delay calculation specification for CMOS ASIC libraries GEL/93 This standard is withdrawn as the corresponding European standard has been withdrawn by CENELEC BS EN 61691-1:1997 Design automation. VHDL language reference manual GEL/93 This standard is withdrawn as the corresponding European standard has been withdrawn by CENELEC BS EN 61691-3-2:2002 Behaviour language. Mathematical operation in VHDL GEL/93 This standard is withdrawn as the corresponding European standard has been withdrawn by CENELEC BS EN 61691-3-2:2002 Design automation. Behavioural languages. Mathematical operation in VHDL GEL/93 This standard is withdrawn as the corresponding European standard has been withdrawn by CENELEC BS EN 62271-203:2004 High-voltage switchgear and controlgear. Gasinsulated metal-enclosed switchgear for rated voltages above 52 kv PEL/17/1 Superseded by BS EN 62271-203:2012 24 Update Standards October 2014 Prices may be subject to change.

BS EN 80601-2-35:2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use CH/62/4 Superseded by BS EN 80601-2-35:2009+A11:2011 BS EN 80601-2-58:2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery CH/62/4 Superseded by BS EN 80601-2-58:2009+A11:2011 DD ENV 50208-6:1998 Data interchange format for simulated and measured data (ISMD) GEL/93 This standard is withdrawn as the corresponding European standard has been withdrawn by CENELEC BS ISO 3218:1976 Essential oils. Principles of nomenclature AW/54 Superseded by BS EN ISO 3218:2014 BS ISO 10109-1:2006 Optics and photonics. Environmental requirements. General overview, terms and definitions, climatic zones and their parameters CPW/172 Superseded by BS ISO 10109:2014 BS ISO 10109-6:2005 Optics and photonics. Environmental requirements. Test requirements for medical optical devices CPW/172 Superseded by BS ISO 10109:2014 BS ISO 10109-7:2001 Optics and optical instruments. Environmental requirements. Test requirements for optical measuring instruments CPW/172 Superseded by BS ISO 10109:2014 BS ISO 10109-8:2005 Optics and photonics. Environmental requirements. Test requirements for extreme conditions of use CPW/172 Superseded by BS ISO 10109:2014 BS ISO 10109-11:2001 Optics and optical instruments. Environmental requirements. Optical instruments for outdoor conditions of use CPW/172 Superseded by BS ISO 10109:2014 BS ISO 10109-12:2004 Optics and optical instruments. Environmental requirements. Conditions of transport for optical instruments CPW/172 Superseded by BS ISO 10109:2014 BS ISO 13555-1:2003 Diesel engines. Procedure for checking the dynamic timing of diesel fuel injection equipment. Preconditioning MCE/22 This standard is withdrawn in line with the withdrawal by ISO of the base international standard BS ISO 13555-2:2003 Diesel engines. Procedure for checking the dynamic timing of diesel fuel injection equipment. Test method MCE/22 This standard is withdrawn in line with the withdrawal by ISO of the base international standard BS ISO 13555-3:2004 Diesel engines. Procedure for checking the dynamic timing of diesel fuel injection equipment. Validation of timing devices MCE/22 This standard is withdrawn in line with the withdrawal by ISO of the base international standard DD ISO/TS 14934-4:2007 Fire tests. Calibration of heat flux meters. Guidance on the use of heat flux meters in fire tests FSH/21 Superseded by BS ISO 14934-4:2014 DD ISO/PAS 21100:2011 Air cargo unit load devices. Performance requirements and test parameters ACE/57 Superseded by BS ISO 21100:2014 DD IEC/TS 62351-5:2009 Power systems management and associated information exchange. Data and communications security. Security for IEC 60870-5 and derivatives PEL/57 Superseded by PD IEC/TS 62351-5:2013 DD IEC/TS 62396-2:2008 Process management for avionics. Atmospheric radiation effects. Guidelines for single event effects testing for avionics systems GEL/107 Superseded by BS IEC 62396-2:2012 DD IEC/TS 62396-5:2008 Process management for avionics. Atmospheric radiation effects. Guidelines for assessing thermal neutron fluxes and effects in avionics systems GEL/107 Superseded by BS IEC 62396-5:2014 PD 6604:1997 (CR 12361:1996) Destructive tests on welds in metallic materials. Etchants for macroscopic and microscopic examination WEE/2 Superseded by PD CEN ISO/TR 16060:2014 BRITISH STANDARDS UNDER REVIEW The following British Standards implement International and/or European Standards which are currently under review to see if they should be confirmed, revised or withdrawn. Comments should be sent to Debbie Stead, Head of Committee Service Centre and International Secretariat, BSI Group, 389 Chiswick High Road, London W4 4AL or via email to BSUKoperations.review@bsigroup.com by 30 November, 2014, in order to be considered by the relevant UK Committee. BS 4140-1:1986 (ISO 802-1976) Methods of test for aluminium oxide. Preparation and storage of test samples CII/24 BS 4140-10:1986 (ISO 903:1976) Methods of test for aluminium oxide. Determination of untamped density CII/24 BS 4140-14:1997 (ISO 2070:1997) Methods of test for aluminium oxide. Determination of calcium content CII/24 BS 4993-8:1980 (BS 5050-11:1980, ISO 4280:1977) Methods of test for aluminium fluoride for industrial use. Determination of sulphate content CII/24 BS 5050-8:1980 (ISO 3391:1976) Methods of test for cryolite. Determination of calcium content CII/24 Update Standards October 2014 Prices may be subject to change. 25

British Standards Under Review continued... BS 5072-5:1980 (ISO 3429:1976) Methods of test for sodium fluoride for industrial use. Determination of iron content CII/24 BS 5072-6:1980 (ISO 3430:1976) Methods of test for sodium fluoride for industrial use. Determination of silica content CII/24 BS 5072-7:1980 (ISO 3431:1976) Methods of test for sodium fluoride for industrial use. Determination of soluble sulphates content CII/24 BS 5341-8.1:1992 (ISO 6626:1989) Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Designs, dimensions and designations for multipiece oil control rings. Specification for coilspring-loaded oil control rings MCE/14 BS 6068-6.7:1994 (ISO 5667-7:1993) Water quality. Sampling. Guidance on sampling of water and steam in boiler plants EH/3/6 BS 6068-6.10:1993 (ISO 5667-10:1992) Water quality. Sampling. Guidance on sampling of waste waters EH/3/6 BS 6721-4:1986 (ISO 4744:1984) Sampling and analysis of copper and copper alloys. Method for determination of chromium in copper and copper alloys by flame atomic absorption spectrophotometry NFE/34 BS 6721-5:1986 (ISO 4740:1985) Sampling and analysis of copper and copper alloys. Method for determination of zinc in copper and copper alloys by flame atomic absorption spectrophotometry NFE/34 BS 6721-6:1989 (ISO 4741:1984) Sampling and analysis of copper and copper alloys. Method for determination of phosphorus in copper and copper alloys by spectrophotometry NFE/34 BS 6721-7:1989 (ISO 4742:1984) Sampling and analysis of copper and copper alloys. Method for determination of nickel in copper alloys: gravimetric method NFE/34 BS 6721-9:1989 (ISO 4749:1984) Sampling and analysis of copper and copper alloys. Method for determination of lead in copper alloys by flame atomic absorption spectrophotometry NFE/34 BS 6740:1987 (ISO 4291:1985) Method for determining departures from roundness by measuring variations in radius TDW/4 BS 6783-14:1994 (ISO 11436:1993) Sampling and analysis of nickel, ferronickel and nickel alloys. Method for the determination of total boron content of nickel, and nickel alloys by curcumin molecular absorption spectrometry I/- BS EN ISO 105-B05:1996 Textiles. Tests for colour fastness. Detection and assessment of photochromism TCI/81 BS EN ISO 105-B06:2004 Textiles. Tests for colour fastness. Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test TCI/81 BS EN ISO 105-C10:2007 Textiles. Tests for colour fastness. Colour fastness to washing with soap or soap and soda TCI/81 BS EN ISO 105-G03:1997 Textiles. Tests for colour fastness. Colour fastness to ozone in the atmosphere TCI/81 BS EN ISO 105-J03:2009 Textiles. Tests for colour fastness. Calculation of colour differences TCI/81 BS EN ISO 105-N02:1995 Textiles. Tests for colour fastness. Colour fastness to bleaching: Peroxide TCI/81 BS EN ISO 105-N03:1995 Textiles. Tests for colour fastness. Colour fastness to bleaching: Sodium chlorite (mild) TCI/81 BS EN ISO 105-N04:1995 Textiles. Tests for colour fastness. Colour fastness to bleaching: Sodium chlorite (severe) TCI/81 BS EN ISO 105-N05:1995 Textiles. Tests for colour fastness. Colour fastness to stoving TCI/81 BS EN ISO 105-P01:1995 Textiles. Tests for colour fastness. Colour fastness to dry heat (excluding pressing) TCI/81 BS EN ISO 105-S01:1996 Textiles. Tests for colour fastness. Colour fastness to vulcanization. Hot air TCI/81 BS EN ISO 105-S02:1996 Textiles. Tests for colour fastness. Colour fastness to vulcanization: Sulfur monochloride TCI/81 BS EN ISO 105-S03:1996 Textiles. Tests for colour fastness. Colour fastness to vulcanization. Open steam TCI/81 BS EN ISO 105-X01:1996 Textiles. Tests for colour fastness. Colour fastness to carbonizing: Aluminium chloride TCI/81 BS EN ISO 105-X02:1996 Textiles. Tests for colour fastness. Colour fastness to carbonizing: Sulfuric acid TCI/81 BS EN ISO 105-X09:1996 Textiles. Tests for colour fastness. Colour fastness to formaldehyde TCI/81 BS EN ISO 105-X10:1996 Textiles. Tests for colour fastness. Assessment of migration of textile colours into polyvinyl chloride coatings TCI/81 BS EN ISO 105-Z01:1996 Textiles. Tests for colour fastness. Colour fastness to metals in the dye-bath: chromium salts TCI/81 BS EN ISO 105-Z02:1996 Textiles. Tests for colour fastness. Colour fastness to metals in the dye-bath. Iron and copper TCI/81 26 Update Standards October 2014 Prices may be subject to change.

BS EN ISO 105-Z06:2000 Textiles. Tests for colour fastness. Evaluation of dye and pigment migration TCI/81 BS EN ISO 105-Z11:2001 Textiles. Tests for colour fastness. Evaluation of speckiness of colorant dispersions TCI/81 BS EN ISO 662:2001 (BS 684-1.10:1998) Animal and vegetable fats and oils. Determination of moisture and volatile matter content AW/307 BS EN 1262:2003 Surface active agents. Determination of ph value of solutions or dispersions CII/34 BS EN ISO 1456:2009 Metallic and other inorganic coatings. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium STI/33 BS EN 1860-2:2005 Appliances, solid fuels and firelighters for barbecueing. Barbecue charcoal and barbecue charcoal briquettes. Requirements and test methods RHE/28/1 BS EN 1860-3:2003 Appliances, solid fuels and firelighters for barbecuing. Firelighters for igniting solid fuels for use in barbecue appliances. Requirements and test methods RHE/28/1 BS EN 1860-4:2004 Appliances, solid fuels and firelighters for barbecueing. Single use barbecues burning solid fuels. Requirements and test methods RHE/28/1 BS EN ISO 2825:2010 Spices and condiments. Preparation of a ground sample for analysis AW/-/2 BS EN ISO 3580:2011 Welding consumables. Covered electrodes for manual metal arc welding of creep-resisting steels. Classification WEE/39 BS EN ISO 3785:2006 Metallic materials. Designation of test specimen axes in relation to product texture ISE/101 BS EN ISO 3907:2009 Hardmetals. Determination of total carbon. Gravimetric method ISE/65 BS EN ISO 3908:2009 Hardmetals. Determination of insoluble (free) carbon. Gravimetric method ISE/65 BS EN ISO 4063:2010 Welding and allied processes. Nomenclature of processes and reference numbers WEE/1 BS EN ISO 4073:2009 Dentistry. Information system on the location of dental equipment in the working area of the oral health care provider CH/106/4 BS EN ISO 4126-3:2006 Safety devices for protection against excessive pressure. Safety valves and bursting disc safety devices in combination PSE/18/6 BS EN ISO 4524-3:1995 Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Electrographic tests for porosity STI/33 BS EN ISO 4524-6:1995 Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings. Determination of the presence of residual salts STI/33 BS EN ISO 5667-15:2009 Water quality. Sampling. Guidance on the preservation and handling of sludge and sediment samples EH/3/6 BS EN ISO 6885:2007 Animal and vegetable fats and oils. Determination of anisidine value AW/307 BS EN ISO 6886:2008 Animal and vegetable fats and oils. Determination of oxidative stability (accelerated oxidation test) AW/307 BS EN ISO 6942:2002 Protective clothing. Protection against heat and fire. Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat PH/3/2 BS EN ISO 7376:August 2009 Anaesthetic and respiratory equipment. Laryngoscopes for tracheal intubation CH/121/5 BS EN ISO 7541:2010 Ground (powdered) paprika. Determination of total natural colouring matter content AW/-/2 BS EN ISO 7711-3:2004 Dentistry. Diamond rotary instruments. Grit sizes, designation and colour code CH/106/4 BS EN ISO 8092-2:2005 Road vehicles. Connections for on-board electrical wiring harnesses. Definitions, test methods and general performance requirements AUE/16 BS EN ISO 8092-4:1999 Road vehicles. Connections for on-board electrical wiring harnesses. Pins for single- and multi-pole connections. Dimensions and specific requirements AUE/16 BS EN ISO 8362-7:2010 Injection containers and accessories. Injection caps made of aluminium-plastics combinations without overlapping plastics part CH/212 BS EN ISO 8871-4:2006 Elastomeric parts for parenterals and for devices for pharmaceutical use. Biological requirements and test methods CH/212 BS EN ISO 9168:2009 Dentistry. Hose connectors for air driven dental handpieces CH/106/4 BS EN ISO 9300:2005 Measurement of gas flow by means of critical flow. Venturi nozzles CPI/30/2 BS EN ISO 9409-1:2004 Manipulating industrial robots. Mechanical interfaces. Plates AMT/4 BS EN ISO 9856:2003+A1:2012 Conveyor belts. Determination of elastic and permanent elongation and calculation of elastic modulus PRI/67 Update Standards October 2014 Prices may be subject to change. 27

British Standards Under Review continued... BS EN ISO 9936:2006+A1:2011 Animal and vegetable fats and oils. Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography AW/307 BS EN ISO 10042:2005 Welding. Arc-welded joints in aluminium and its alloys. Quality levels for imperfections WEE/-/1 BS EN ISO 10139-2:2009 Dentistry. Soft lining materials for removable dentures. Materials for long-term use CH/106/2 BS EN 10184:2006 Chemical analysis of ferrous materials. Determination of phosphorus in non-alloyed steels and irons. Molybdenum blue spectrophotometric method ISE/102 BS EN 10315:2006 Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near by technique ISE/102 BS EN 10318:2005 Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings. Routine method ISE/102 BS EN ISO 10517:2009+A1:2013 Powered hand-held hedge trimmers. Safety AGE/20 BS EN 12139:1999 Surface active agents. Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC CII/34 BS EN 12299:2009 Railway applications. Ride comfort for passengers. Measurement and evaluation RAE/1/-/5 BS EN ISO 12401:2009 Small craft. Deck safety harness and safety line. Safety requirements and test methods PH/3/6 BS EN 12458:1999 Surface active agents. Determination of stability in hard water CII/34 BS EN 12582:1999 Surface active agents. Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD CII/34 BS EN 12663-2:2010 Railway applications. Structural requirements of railway vehicle bodies. Freight wagons RAE/1/-/2 BS EN 12728:2000 Surface active agents. Determination of foaming power. Perforated disc beating method CII/34 BS EN ISO 12967-1:2011 Health informatics. Service architecture. Enterprise viewpoint IST/35 BS EN ISO 12967-2:2011 Health informatics. Service architecture. Information viewpoint IST/35 BS EN ISO 12967-3:2011 Health informatics. Service architecture. Computational viewpoint IST/35 BS EN 12974:2000 Surface active agents. Determination of the 1,4- dioxane content in alkyl-ethoxy-sulfate products by GLC/head space procedure CII/34 BS EN 13103:2009+A2:2012 Railway applications. Wheelsets and bogies. Non powered axles. Design method RAE/3/-/1 BS EN 13104:2009+A2:2012 Railway applications. Wheelsets and bogies. Powered axles. Design method RAE/3/-/1 BS EN 13145:2001+A1:2011 Railway applications. Track. Wood sleepers and bearers RAE/2 BS EN 13260:2009+A1:2010 Railway applications. Wheelsets and bogies. Wheelsets. Product requirements RAE/3/-/1 BS EN 13270:2001 Surface active agents. Determination of the active matter content in alkyldimethylbetaines CII/34 BS EN 13273:2001 Surface active agents. Determination of the content of non-ionic substances in anionic surface active agents by high performance liquid chromatography (HPLC) CII/34 BS EN 13405:2002 Surface active agents. Determination of dialkyltetralins content in linear alkylbenzene by high performance liquid chromatography (HPLC) CII/34 BS EN ISO 13479:2009 Polyolefin pipes for the conveyance of fluids. Determination of resistance to crack propagation. Test method for slow crack growth on notched pipes PRI/88/4 BS EN ISO 13503-5:2006 Petroleum and natural gas industries. Completion fluids and materials. Procedures for measuring the long term conductivity of proppants PSE/17/-/3 BS EN ISO 13628-2:2006 Petroleum and natural gas industries. Design and operation of subsea production systems. Unbonded flexible pipe systems for subsea and marine applications PSE/17/-/4 BS EN 13674-3:2006+A1:2010 Railway applications. Track. Rail. Check rails RAE/2 BS EN 13717:2002 Surface active agents. Determination of primary, secondary and tertiary amino nitrogen. Potentiometric titration CII/34 BS EN 13848-3:2009 Railway applications. Track. Track geometry quality. Measuring systems. Track construction and maintenance machines RAE/2 BS EN 13926:2003 Surface active agents. Alkoxylated derivatives. Determination of hydroxyl value. N-methyl imidazole method CII/34 BS EN 13955:2002 Surface active agents. Determination of Krafft point and solubility of ionic surface active agents CII/34 28 Update Standards October 2014 Prices may be subject to change.

BS EN ISO 13982-1:2004+A1:2010 Protective clothing for use against solid particulates. Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) PH/3/3 BS EN 13996:2002 Surface active agents. Foaming power and antifoaming power. Turbine stirring method CII/34 BS EN ISO 14025:2010 Environmental labels and declarations. Type III environmental declarations. Principles and procedures SES/1/3 BS EN ISO 14171:2010 Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels. Classification WEE/39 BS EN 14210:2003 Surface active agents. Determination of interfacial tension of solutions of surface active agents by the stirrup or ring method CII/34 BS EN ISO 14245:2010 Gas cylinders. Specifications and testing of LPG cylinder valves. Self-closing PVE/19 BS EN ISO 14341:2011 Welding consumables. Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification WEE/39 BS EN ISO 14344:2010 Welding consumables. Procurement of filler materials and fluxes WEE/39 BS EN 14370:2004 Surface active agents. Determination of surface tension CII/34 BS EN 14371:2004 Surface active agents. Determination of foamability and degree of foamability. Circulation test method CII/34 BS EN 14535-1:2005+A1:2011 Railway applications. Brake discs for railway rolling stock. Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements RAE/4 BS EN 14666:2005 Surface active agents. Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules. Gas chromatographic method CII/34 BS EN 14667:2005 Surface active agents. Determination of low boiling solvents in liquid formulations. Gas chromatographic method CII/34 BS EN 14668:2005 Surface active agents. Determination of quaternary ammonium surface active agents in raw materials and formulated products. Potentiometric two-phase titration method CII/34 BS EN 14669:2005 Surface active agents. Determination of anionic surface active agents and soaps in detergents and cleansers. Potentiometric two-phase titration method CII/34 BS EN 14670:2005 Surface active agents. Sodium dodecyl sulfate. Analytical method CII/34 BS EN 14712:2005 Surface active agents. Determination of physical stability in alkaline and acid solutions CII/34 BS EN ISO 14814:2006 Road transport and traffic telematics. Automatic vehicle and equipment identification. Reference architecture and terminology EPL/278 BS EN 14880:2005 Surface active agents. Determination of inorganic sulfate content in anionic surface active agents. Potentiometric lead selective electrode titration method CII/34 BS EN 14881:2005 Surface active agents. Determination of N-(3- dimethylaminopropyl)-alkylamide content in alkylamidopropylbetaines. Gas chromatographic method CII/34 BS EN ISO 15011-4:2006+A1:2008 Health and safety in welding and allied processes. Laboratory method for sampling fume and gases. Fume data sheets WEE/40 BS EN ISO 15236-1:2005 Steel cord conveyor belts. Design, dimensions and mechanical requirements for conveyor belts for general use PRI/67 BS EN ISO 15463:2003 Petroleum and natural gas industries. Field inspection of new casing, tubing and plain-end drill pipe PSE/17/-/5 BS EN 15608:2008 Surface active agents. Quantitative determination of free fatty acid in alkylamidopropylbetaines. Gas-chromatographic method CII/34 BS EN ISO 15753:2006+A1:2011 Animal and vegetable fats and oils. Determination of polycyclic aromatic hydrocarbons. Exclusion of olive pomace oil from the scope AW/307 BS EN ISO 15788-1:2001 (BS 684-2.49:2000) Animal and vegetable fats and oils. Determination of stigmastadienes in vegetable oils Method using capillary-column gas chromatography (Reference method) AW/307 BS EN ISO 15792-1:2008+A1:2011 Welding consumables. Test methods. Test methods for all-weld metal test specimens in steel, nickel and nickel alloys WEE/39 BS EN ISO 15792-2:2008 Welding consumables. Test methods. Preparation of single-run and two-run technique test specimens in steel WEE/39 BS EN ISO 15952:2011 Soil quality. Effects of pollutants on juvenile land snails (Helicidae). Determination of the effects on growth by soil contamination EH/4 BS EN ISO 15995:2010 Gas cylinders. Specifications and testing of LPG cylinder valves. Manually operated PVE/19 Update Standards October 2014 Prices may be subject to change. 29

British Standards Under Review continued... BS EN ISO 17287:2003 Road vehicles. Ergonomic aspects of transport information and control systems. Procedure for assessing suitability for use while driving EPL/278 BS EN ISO 17633:2010 Welding consumables. Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels. Classification WEE/39 BS EN ISO 18274:2010 Welding consumables. Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys. Classification WEE/39 BS EN ISO 18857-2:2011 Water quality. Determination of selected alkylphenols. Gas chromatographic-mass spectrometric determination of alkylphenols, their ethoxylates and bisphenol A in nonfiltered samples following solid-phase extraction and derivatisation EH/3/2 BS EN ISO 19111-2:2012 Geographic information. Spatial referencing by coordinates. Extension for parametric values IST/36 BS EN ISO 19144-1:2012 Geographic information. Classification systems. Classification system structure IST/36 BS EN ISO 19439:2006 Enterprise integration. Framework for enterprise modelling AMT/5 BS EN ISO 20072:2013 Aerosol drug delivery device design verification. Requirements and test methods CH/84 BS EN 20105-A02:1995 (ISO 105-A02:1993) Textiles. Tests for colour fastness. Grey scale for assessing change in colour TCI/81 BS EN 20105-A03:1995 (ISO 105-A03:1993) Textiles. Tests for colour fastness. Grey scale for assessing staining TCI/81 BS EN 20105-N01:1995 (ISO 105-N01:1993) Textiles. Tests for colour fastness. Colour fastness to bleaching: hypochlorite TCI/81 BS EN ISO 21007-1:2005 Gas cylinders. Identification and marking using radio frequency identification technology. Reference architecture and terminology PVE/3/7 BS EN ISO 21183-1:2006 Light conveyor belts. Principal characteristics and applications PRI/67 BS EN ISO 21183-2:2006 Light conveyor belts. List of equivalent terms PRI/67 BS EN ISO 21415-4:2007 Wheat and wheat flour. Gluten content. Determination of dry gluten from wet gluten by a rapid drying method AW/4 BS EN ISO 21469:2006 Safety of machinery. Lubricants with incidental product contact. Hygiene requirements MCE/3 BS EN ISO 21569:2005+A1:2013 Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. Qualitative nucleic acid based methods AW/275 BS EN ISO 21570:2005+A1:2013 Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. Quantitative nucleic acid based methods AW/275 BS EN ISO 21571:2005+A1:2013 Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. Nucleic acid extraction AW/275 BS EN ISO 21649:2009 Needle-free injectors for medical use. Requirements and test methods CH/84 BS EN ISO 22112:2006 Dentistry. Artificial teeth for dental prostheses CH/106/2 BS EN ISO 23161:2011 Soil quality. Determination of selected organotin compounds. Gas-chromatographic method EH/4 BS EN ISO 23210:2009 Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at low concentrations by use of impactors EH/2/1 BS EN ISO 23275-1:2008 Animal and vegetable fats and oils. Cocoa butter equivalents in cocoa butter and plain chocolate. Determination of the presence of cocoa butter equivalents AW/307 BS EN ISO 23275-2:2008 Animal and vegetable fats and oils. Cocoa butter equivalents in cocoa butter and plain chocolate. Quantification of cocoa butter equivalents AW/307 BS EN ISO 23611-1:2011 Soil quality. Sampling of soil invertebrates. Hand-sorting and formalin extraction of earthworms EH/4 BS EN ISO 23611-2:2011 Soil quality. Sampling of soil invertebrates. Sampling and extraction of micro-arthropods (Collembola and Acarina) EH/4 BS EN ISO 23753-1:2011 Soil quality. Determination of dehydrogenase activity in soil. Method using triphenyltetrazolium chloride (TTC) EH/4 BS EN ISO 23753-2:2011 Soil quality. Determination of dehydrogenase activity in soils. Method using iodotetrazolium chloride (INT) EH/4 BS EN ISO 24034:2010 Welding consumables. Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys. Classification WEE/39 BS EN ISO 24276:2006+A1:2013 Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. General requirements and definitions AW/275 30 Update Standards October 2014 Prices may be subject to change.

BS EN ISO 24978:2009 Intelligent transport systems. ITS Safety and emergency messages using any available wireless media. Data registry procedures EPL/278 BS EN ISO 25424:2011 Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices CH/198 BS EN ISO 26782:2009 Anaesthetic and respiratory equipment. Spirometers intended for the measurement of time forced expired volumes in humans CH/121/9 BS EN ISO 30024:2009 Animal feeding stuffs. Determination of phytase activity AW/10 BS EN 62520:2011 Railway applications. Electric traction. Shortprimary type linear induction motors (LIM) fed by power converters GEL/9 BS EN 80416-2:2001 Basic principles for graphical symbols for use on equipment. Form and use of arrows GEL/3 BS EN ISO 80601-2-56:2012 Medical electrical equipment. Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement CH/205 BS ISO 76:2006 Rolling bearings. Static load ratings MCE/7 BS ISO 368:2006 Spinning preparatory, spinning and doubling (twisting) machinery. Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64 TCI/33 BS ISO 702-1:2009 Machine tools. Connecting dimensions of spindle noses and work holding chucks. Conical connection MTE/1/2 BS ISO 860:2007 Terminology work. Harmonization of concepts and terms TS/1 BS ISO 1803:1997 Building construction. Tolerances. Expression of dimensional accuracy. Principles and terminology B/554 BS ISO 1871:2009 Food and feed products. General guidelines for determination of nitrogen by Kjeldahl method AW/275 BS ISO 2041:2009 Mechanical vibration, shock and condition monitoring. Vocabulary GME/21/1 BS ISO 2382-10:1979 Data processing. Vocabulary. Operating techniques and facilities ICT/-/1 BS ISO 2470-1:2009 Paper, board and pulps. Measurement of diffuse blue reflectance factor. Indoor daylight conditions (ISO brightness) PAI/11 BS ISO 2943:1998 Hydraulic fluid power. Filter elements. Verification of material compatibility with fluids MCE/18 BS ISO 3046-3:2006 Reciprocating internal combustion engines. Performance. Test measurements MCE/14/-/6 BS ISO 3334:2006 Micrographics. ISO resolution test chart No 2. Description and use IDT/1 BS ISO 3976:2006 Milk fat. Determination of peroxide value AW/5 BS ISO 4008-3:1987 Road vehicles. Fuel injection pump testing. Application and test procedures MCE/22 BS ISO 4141-1:2005 Road vehicles. Multi-core connecting cables. Test methods and requirements for basic performance sheathed cables AUE/16 BS ISO 4141-2:2006 Road vehicles. Multi-core connecting cables. Test methods and requirements for high performance sheathed cables AUE/16 BS ISO 4141-3:2006 Road vehicles. Multi-core connecting cables. Construction, dimensions and marking of unscreened sheathed low-voltage cables AUE/16 BS ISO 4179:2005 Ductile iron pipes and fittings for pressure and non-pressure pipelines. Cement mortar lining PSE/10 BS ISO 4266-4:2002 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Measurement of temperature in atmospheric tanks PTI/12 BS ISO 4306-5:2005 Cranes. Vocabulary. Bridge and gantry cranes MHE/3/3 BS ISO 4378-1:2009 Plain bearings. Terms, definitions, classification and symbols. Design, bearing materials and their properties MCE/12 BS ISO 4378-2:2009 Plain bearings. Terms, definitions, classification and symbols. Friction and wear MCE/12 BS ISO 4378-3:2009 Plain bearings. Terms, definitions, classification and symbols. Lubrication MCE/12 BS ISO 4378-4:2009 Plain bearings. Terms, definitions, classification and symbols. Basic symbols MCE/12 BS ISO 4378-5:2009 Plain bearings. Terms, definitions, classification and symbols. Application of symbols MCE/12 BS ISO 4720:2009 Essential oils. Nomenclature AW/54 BS ISO 5168:2005 Measurement of fluid flow. Procedures for the evaluation of uncertainties CPI/30 BS ISO 5389:2005 Turbocompressors. Performance test code MCE/8 Update Standards October 2014 Prices may be subject to change. 31

British Standards Under Review continued... BS ISO 5418-1:2006 Iron ores. Determination of copper. 2,2 - Biquinolyl spectrophotometric method ISE/58 BS ISO 5418-2:2006 Iron ores. Determination of copper. Flame atomic absorption spectrometric method ISE/58 BS ISO 6107-7:2006 (BS 6068-1.7:2006) Water quality. Vocabulary. Part 7 EH/3 BS ISO 6279:2006 Plain bearings. Aluminium alloys for solid bearings MCE/12 BS ISO 6469-1:2009 Electrically propelled road vehicles. Safety specifications. On-board rechargeable energy storage system (RESS) PEL/69 BS ISO 6469-2:2009 Electrically propelled road vehicles. Safety specifications. Vehicle operational safety means and protection against failures PEL/69 DD ISO/TS 6733:2006 Milk and milk products. Determination of lead content. Graphite furnace atomic absorption spectrometric method AW/5 BS ISO 6811:1998 Spherical plain bearings. Vocabulary MCE/7 BS ISO 6939:1988 Textiles. Yarns from packages. Method of test for breaking strength of yarn by the skein method TCI/24 BS ISO 7404-2:2009 Methods for the petrographic analysis of coals. Methods of preparing coal samples PTI/16 BS ISO 7404-3:2009 Methods for the petrographic analysis of coals. Method of determining maceral group composition PTI/16 BS ISO 7404-5:2009 Methods for the petrographic analysis of coals. Method of determining microscopically the reflectance of vitrinite PTI/16 BS ISO 7507-1:2003 Petroleum and liquid petroleum products. Calibration of vertical cylindrical tanks. Strapping method PTI/12 BS ISO 7588-1:1998 Road vehicles. Electrical/electronic switching devices. Relays and flashers AUE/16 BS ISO 7588-2:1998 Road vehicles. Electrical/electronic switching devices. Electronic devices AUE/16 BS ISO 7588-3:1998 Road vehicles. Electrical/electronic switching devices. Microrelays AUE/16 BS ISO 7764:2006 Iron ores. Preparation of predried test samples for chemical analysis ISE/58 BS ISO/IEC 7816-9:2004 Identification cards. Integrated cicuit cards. Commands for card management IST/17 BS ISO 7919-2:2009 Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts. Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min GME/21/5 BS ISO 7919-4:2009 Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts. Gas turbine sets with fluid-film bearings GME/21/5 BS ISO 8083:2006 Machinery for forestry. Falling-object protective structures (FOPS). Laboratory tests and performance requirements AGE/29 BS ISO 8528-3:2005 Reciprocating internal combustion engine driven alternating current generating sets. Alternating current generators for generating sets MCE/14/-/8 BS ISO 8548-5:2003 Prosthetics and orthotics. Limb deficiencies. Description of the clinical condition of the person who has had an amputation CH/168 BS ISO 8551:2003 Prosthetics and orthotics. Functional deficiencies. Description of the person to be treated with an orthosis, clinical objectives of treatment, and functional requirements of the orthosis CH/168 BS ISO 9517:2007 Iron ores. Determination of water-soluble chloride content. Ion-selective electrode method ISE/58 BS ISO/IEC TR 9578:1990 Information technology. Communication interface connectors used in local area networks IST/6 BS ISO 9628:2006+A1:2011 Rolling bearings. Insert bearings and eccentric locking collars. Boundary dimensions and tolerances MCE/7 BS ISO 9682-2:2006 Iron ores. Determination of manganese content. Periodate spectrophotometric method ISE/58 BS ISO 9683-1:2006 Iron ores. Determination of vanadium. BPHA spectrophotometric method ISE/58 BS ISO 9844:2006 Oil of bitter orange (Citrus aurantium L.) AW/54 BS ISO 9874:2006 Milk. Determination of total phosphorus content. Method using molecular absorption spectrometry AW/5 BS ISO 9947:2005 Textile machinery and accessories. Two-for-one twisters. Vocabulary TCI/33 BS ISO 10014:2006 Quality management. Guidelines for realizing financial and economic benefits QS/1 BS ISO 10050:2005 Lubricants, industrial oils and related products (class L). Family T (Turbines). Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD) MCE/18/-/16 32 Update Standards October 2014 Prices may be subject to change.

BS ISO 10129:2006 Plain bearings. Testing of bearing materials. Resistance to corrosion by lubricants under static conditions MCE/12 BS ISO 10643:2009 Dimensions of accessories for cutting tools and their attachments MTE/18 BS ISO 10651-5:2006 Lung ventilators for medical use. Particular requirements for basic safety and essential performance. Gas-powered emergency resuscitators CH/121/9 BS ISO 10770-1:2009 Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for fourport directional flow-control valves MCE/18/-/8 DD ISO/TS 10798:2011 Nanotechnologies. Characterization of singlewall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis NTI/1 BS ISO 10816-2:2009 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min GME/21/5 BS ISO 10816-4:2009 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Gas turbine sets with fluid-film bearings GME/21/5 DD ISO/TS 10868:2011 Nanotechnologies. Characterization of singlewall carbon nanotubes using ultraviolet-visiblenear infrared (UV-Vis-NIR) absorption spectroscopy NTI/1 BS ISO 10928:2009+A1:2013 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Methods for regression analysis and their use PRI/88/2 BS ISO 10957:2009 Information and documentation. International standard music number (ISMN) IDT/2/18 BS ISO 11053:2009 Vegetable fats and oils. Determination of cocoa butter equivalents in milk chocolate AW/307 BS ISO 11093-5:2009 Paper and board. Testing of cores. Determination of characteristics of concentric rotation PAI/11 BS ISO 11158:2009 Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HH, HL, HM, HV and HG MCE/18/-/16 BS ISO 11277:2009 Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation EH/4 BS ISO 11433:1993+A1:2013 Nickel alloys. Determination of titanium content. Diantipyrylmethane molecular absorption spectrometric method I/- BS ISO 11534:2006 Iron ores. Determination of tin. Flame atomic absorption spectrometric method ISE/58 BS ISO 11535:2006 Iron ores. Determination of various elements. Inductively coupled plasma atomic emission spectrometric method ISE/58 BS ISO 11865:2009 Instant whole milk powder. Determination of white flecks number AW/5 BS ISO 11870:2009 Milk and milk products. Determination of fat content. General guidance on the use of butyrometric methods AW/5 BS ISO 11898-3:2006 Road vehicles. Controller area network (CAN). Low-speed, fault-tolerant, medium-dependent interface AUE/16 BS ISO 12078:2006 Anhydrous milk fat. Determination of sterol composition by gas liquid chromatography (Reference method) AW/5 BS ISO 12080-1:2009 Dried skimmed milk. Determination of vitamin A content. Colorimetric method AW/5 BS ISO 12080-2:2009 Dried skimmed milk. Determination of vitamin A content. Method using high-performance liquid chromatography AW/5 BS ISO 12151-6:2009 Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO 8434-6 60º cone ends MCE/18/-/4 BS ISO 12240-1:1998 Spherical plain bearings. Radial spherical plain bearings MCE/7 BS ISO 12240-2:1998 Spherical plain bearings. Angular contact radial spherical plain bearings MCE/7 BS ISO 12240-3:1998 Spherical plain bearings. Thrust spherical plain bearings MCE/7 BS ISO 12240-4:1998 Spherical plain bearings. Spherical plain bearing rod ends MCE/7 BS ISO 12472:2003 Fire resistance of timber door assemblies. Method of determining the efficacy of intumescent seals FSH/22/-/5 BS ISO 12686:1999 Metallic and other inorganic coatings. Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish STI/33 BS ISO 13218:1998 Road vehicles. Child restraint systems. Report form for accidents involving child passengers AUE/7 BS ISO 13320:2009 Particle size analysis. Laser diffraction methods LBI/37 DD ISO/TS 13498:2011 Dentistry. Torsion test of implant body/connecting part joints of endosseous dental implant systems CH/106/8 Update Standards October 2014 Prices may be subject to change. 33

British Standards Under Review continued... BS ISO/IEC 13888-1:2009 Information technology. Security techniques. Non-repudiation. General IST/33 BS ISO 14378:2009 Milk and dried milk. Determination of iodide content. Method using high-performance liquid chromatography AW/5 BS ISO 14401-1:2009 Earth-moving machinery. Field of vision of surveillance and rear-view mirrors. Test methods B/513/1 BS ISO 14401-2:2009 Earth-moving machinery. Field of vision of surveillance and rear-view mirrors. Performance criteria B/513/1 BS ISO/IEC 14496-8:2004 Information technology. Coding of audio-visual objects. Carriage of ISO/IEC 14496 Contents over IP networks IST/37 BS ISO/IEC 14496-19:2004 Information technology. Coding of audio-visual objects. Synthesized texture stream IST/37 BS ISO 14531-4:2006 Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications. System design and installation guidelines PRI/88/2 BS ISO 14813-6:2009 Intelligent transport systems. Reference model architecture(s) for the ITS sector. Data presentation in ASN.1 EPL/278 BS ISO/IEC 14977:1996 Information technology. Syntactic Metalanguage. Extended BNF IST/5 BS ISO 15037-2:2002 Road vehicles. Vehicle dynamics test methods. General conditions for heavy vehicles and buses AUE/15 BS ISO 15169:2003 Petroleum and liquid petroleum products. Determination of volume, density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tank measurement systems PTI/12 BS ISO/IEC TR 15294:2000 Information technology. Methods for data flow control at synchronous and asynchronous DTE- DCE interfaces IST/6 BS ISO 15312:2003 Rolling bearings. Thermal speed rating. Calculation and coefficients MCE/7 BS ISO 15348:2002 Pipework. Metal bellows expansion joints. General GSE/42 BS ISO/IEC 15459-8:2009 Information technology. Unique identifiers. Grouping of transport units IST/34 BS ISO 15713:2006 Stationary source emissions. Sampling and determination of gaseous fluoride content EH/2/1 BS ISO/IEC 15963:2009 Information technology. Radio frequency identification for item management. Unique identification for RF tags IST/34 BS ISO 16042:2007 Iron ores. Guidelines for the use of certified reference materials (CRMs) ISE/58 BS ISO 16155:2006 Ships and marine technology. Computer applications. Shipboard loading instruments SME/32 DD CEN ISO/TS 16181:2011 Footwear. Critical substances potentially present in footwear and footwear components. Determination of phthalates in footwear materials TCI/69 BS ISO 16183:2002 Heavy duty engines. Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions MCE/22 BS ISO 16247:2004 Road vehicles. Detection of exhaust systems leaks. Helium test method and detection device specification MCE/22 BS ISO 16750-1:2006 Road vehicles. Environmental conditions and testing for electrical and electronic equipment. General AUE/16 BS ISO 17338:2009 Ships and marine technology. Drawings for fire protection. Indications of fire rating by divisions for ships and high-speed craft SME/32/-/1 BS ISO 17356-2:2005 Road vehicles. Open interface for embedded automotive applications. OSEK/VDX specifications for binding OS, COM and NM AUE/16 BS ISO 17356-3:2005 Road vehicles. Open interface for embedded automotive applications. OSEK/VDX operating system (OS) AUE/16 BS ISO 17356-4:2005 Road vehicles. Open interface for embedded automotive applications. OSEK/VDX Communication (COM) AUE/16 BS ISO 17356-5:2006 Road vehicles. Open interface for embedded automotive applications. OSEK/VDX Network Management (NM) AUE/16 BS ISO 17356-6:2006 Road vehicles. Open interface for embedded automotive applications. OSEK/VDX implementation language (OIL) AUE/16 BS ISO 17499:2006 Carbonaceous materials used in the production of aluminium. Determination of baking level expressed by equivalent temperature CII/24 BS ISO 17500:2006 Aluminium oxide used for the production of primary aluminium. Determination of attrition index CII/24 BS ISO/IEC 18000-2:2009 Information technology. Radio frequency identification for item management. Parameters for air interface communications below 135 khz IST/34 BS ISO 18232:2006 Health informatics. Messages and communication. Format of length limited globally unique string identifiers IST/35 BS ISO 18252:2006 Anhydrous milk fat. Determination of sterol composition by gas liquid chromatography (Routine method) AW/5 34 Update Standards October 2014 Prices may be subject to change.

BS ISO 18352:2009 Carbon-fibre-reinforced plastics. Determination of compression-after-impact properties at a specified impact-energy level PRI/42 BS ISO/IEC 19792:2009 Information technology. Security techniques. Security evaluation of biometrics IST/33 BS ISO 20369:2009 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products. Determination of citrate content AW/40 BS ISO 20370:2009 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products. Determination of acetate content AW/40 BS ISO 20421-1:2006 Cryogenic vessels. Large transportable vacuuminsulated vessels. Design, fabrication, inspection and testing PVE/18 BS ISO 20703:2006 Gas cylinders. Refillable welded aluminium-alloy cylinders. Design, construction and testing PVE/3/3 BS ISO 20957-2:2005 Stationary training equipment. Strength training equipment. Additional specific safety requirements and test methods SW/136/4 BS ISO 21006:2006 Internal combustion engines. Engine weight (mass) declaration MCE/14 BS ISO 21072-2:2009 Ships and marine technology. Marine environment protection. Performance testing of oil skimmers. Static water conditions SME/32/-/2 BS ISO 21848:2005 Road vehicles. Electrical and electronic equipment for a supply voltage of 42 V. Electrical loads AUE/16 DD CEN ISO/TS 22367:2010 Medical laboratories. Reduction of error through risk management and continual improvement CH/212 DD ISO/TS 22559-3:2011 Safety requirements for lifts (elevators). Global conformity assessment procedures (GCAP). Prerequisites for certification of conformity of lift systems, lift components and lift functions MHE/4 DD ISO/TS 22559-4:2011 Safety requirements for lifts (elevators). Global conformity assessment procedures (GCAP). Certification and accreditation requirements MHE/4 BS ISO 22902-1:2006 Road vehicles. Automotive multimedia interface. General technical overview AUE/16 BS ISO 22902-2:2006 Road vehicles. Automotive multimedia interface. Use cases AUE/16 BS ISO 22902-3:2006 Road vehicles. Automotive multimedia interface. System requirements AUE/16 BS ISO 22902-4:2006 Road vehicles. Automotive multimedia interface. Network protocol requirements for vehicle interface access AUE/16 BS ISO 22902-5:2006 Road vehicles. Automotive multimedia interface. Common message set AUE/16 BS ISO 22902-6:2006 Road vehicles. Automotive multimedia interface. Vehicle interface requirements AUE/16 BS ISO 22902-7:2006 Road vehicles. Automotive multimedia interface. Physical specification AUE/16 BS ISO 22915-7:2009 Industrial trucks. Verification of stability. Bidirectional and multidirectional trucks MHE/7 BS ISO 22915-21:2009 Industrial trucks. Verification of stability. Orderpicking trucks with operator position elevating above 1200mm MHE/7 BS ISO 23185:2009 Assessment and benchmarking of terminological resources. General concepts, principles and requirements TS/1 BS ISO 23232:2009 Textiles. Aqueous liquid repellency. Water/alcohol solution resistance test TCI/24 BS ISO 24097-1:2009 Intelligent transport systems. Using web services (machine-machine delivery) for ITS service delivery. Realization of interoperable web services EPL/278 BS ISO 24173:2009 Microbeam analysis. Guidelines for orientation measurement using electron backscatter diffraction CII/9 BS ISO 24293:2009 Water quality. Determination of individual isomers of nonylphenol. Method using solid phase extraction (SPE) and gas chromatography/mass spectrometry (GC/MS) EH/3/2 BS ISO/IEC 24703:2004 Information technology. Participant identifiers IST/43 BS ISO/IEC 24713-3:2009 Information technology. Biometric profiles for interoperability and data interchange. Biometrics-based verification and identification of seafarers IST/44 BS ISO 25720:2009 Health informatics. Genomic sequence variation markup language (GSVML) IST/35 DD ISO/TS 25740-1:2011 Safety requirements for escalators and moving walks. Global essential safety requirements (GESR) MHE/4 DD ISO/TS 26844:2006 Milk and milk products. Determination of antimicrobial residues. Tube diffusion test AW/5 BS ISO 27448:2009 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for selfcleaning performance of semiconducting photocatalytic materials. Measurement of water contact angle RPI/13 BS ISO 28079:2009 Hardmetals. Palmqvist toughness test ISE/65 Update Standards October 2014 Prices may be subject to change. 35

British Standards Under Review continued... BS ISO 28198:2009 Vegetable fats and oils. Determination of toluene insoluble matter AW/307 BS ISO/IEC 29109-1:2009 Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794. Generalized conformance testing methodology IST/44 BS ISO 30003:2009 Ships and marine technology. Ship recycling management systems. Requirements for bodies providing audit and certification of ship recycling management SME/32 DD ISO/TS 80004-7:2011 Nanotechnologies. Vocabulary. Diagnostics and therapeutics for healthcare NTI/1 BS AU 1c:1989 (ISO 337:1981) Specification for dimensions of 50 fifth wheel king pin for semi-trailers AUE/13 BS AU 180-2:1982 (ISO 6311:1980) Brake linings. Method for measurement of internal shear strength of lining material AUE/11 BS AU 180-4:1982 (ISO 6313:1980) Brake linings. Method for determining effects of heat on dimensions and form of disc brake pads AUE/11 BS AU 180-5:1983 (ISO 6314:1980) Brake linings. Method for determining resistance to water, saline solution, oil and brake fluid of brake lining material AUE/11 BS AU 180-6:1982 (ISO 6315:1980) Brake linings. Method for assessment of seizure to ferrous mating surface due to corrosion AUE/11 BS AU 214-2:1988 (ISO 7646:1986) Gearbox flanges. Specification for dimensions for type A gearbox flanges for commercial vehicles and buses AUE/13 NEW WORK STARTED The reference number of the committee responsible for each item of new work started is given after each entry. Where a work item has the temporary designation EN XXXX, it has not yet been allocated a standard number by the European standards body. BS 11 Specification for railway rails RAE/2 BS 134:1965/A2 Specification for aircraft material. 3 per cent chromium-molybdenum-vanadium steel (air hardening) (100 tonf/sq in: limiting ruling section 1 1 8 inches) ACE/61/-/15 BS 148:1969/A2 Specification for low nickel-chromium steel (bar for the manufacture of forged bolts only) ACE/61/-/15 BS 8584 Vacant property protection. Code of practice GW/3 BS 70000 Physical sciences and engineering services in healthcare. Requirements for quality and competence CH/100 BS 5S 99:1994/A1 Specification for 2.5% nickel-chromiummolybdenum (high carbon) steel billets, bars, forgings and parts (1230-1420 MPa. limiting ruling section 150 mm) ACE/61/-/15 BS 3S 102:1969/A2 Specification for carbon-molybdenum steel (bar for the manufacture of forged bolts only) ACE/61/-/15 BS 3S 144:1995/A2 Specification for chromium-nickel-coppermolybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1130-1330 MPa) ACE/61/-/15 BS 3S 145:1996/A2 Specification for chromium-nickel-coppermolybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1270 MPa to 1470 MPa) ACE/61/-/15 BS 2S 515:1969/A2 Specification for carbon-manganese steel sheet and strip (softened) (for use in the softened condition: 460/600 MPa) (suitable for welding) ACE/61/-/15 EN 54-2 Fire detection and fire alarm systems. Control and indicating equipment will supersede BS EN 54-2:1997+A1:2006 FSH/12 EN WI 00127273 Fire resistance tests for service installations. Kitchen extract ducts FSH/22/-/4 EN WI 00262288 Metallic and other inorganic coatings. Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test) ISE/NFE/8 EN 126:2012/A1 Burning appliances GSE/22 EN 350 Durability of wood and wood-based products. Testing and classification of the resistance to biological agents and the water permeability of wood and wood-based materials will supersede BS EN 350-1:1994 and BS EN 350-2:1994 B/515 EN 1090-5 Execution of steel structures and aluminium structures. Technical requirements for thin gauge, cold formed aluminium elements and structures for roof, ceiling, floor and wall applications B/525/9 EN 1634-1:2014/A1 Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware. Fire resistance test for door and shutter assemblies and openable windows FSH/22/-/5 EN 1910 Wood flooring and wood panelling and cladding. Determination of dimensional stability will supersede BS EN 1910:2013 B/543 EN ISO 7726 Ergonomics of the thermal environment. Instruments for measuring physical quantities will supersede BS EN ISO 7726:2001 PH/9/-/1 EN ISO 7933 Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain will supersede BS EN ISO 7933:2004 PH/9/-/1 EN ISO 9018 Materials. Tensile test on cruciform and lapped joints will supersede BS EN ISO 9018:2003 WEE/46 36 Update Standards October 2014 Prices may be subject to change.

EN 10028-1 Flat products made of steels for pressure purposes. General requirements will supersede BS EN 10028-1:2007+A1:2009 ISE/107 EN 10028-2 Flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties will supersede BS EN 10028-2:2009 ISE/107 EN 10028-3 Flat products made of steels for pressure purposes. Weldable fine grain steels, normalized will supersede BS EN 10028-3:2009 ISE/107 EN 10028-4 Flat products made of steels for pressure purposes. Nickel alloy steels with specified low temperature properties will supersede BS EN 10028-4:2009 ISE/107 EN 10028-5 Flat products made of steels for pressure purposes. Weldable fine grain steels, thermomechanically rolled will supersede BS EN 10028-5:2009 ISE/107 EN 10028-6 Flat products made of steels for pressure purposes. Weldable fine grain steels, quenched and tempered will supersede BS EN 10028-6:2009 ISE/107 EN 10120 Steel sheet and strip for welded gas cylinders will supersede BS EN 10120:2008 ISE/107 EN ISO 10551 Ergonomics of the thermal environment. Assessment of the influence of the thermal environment using subjective judgement scales will supersede BS EN ISO 10551:2001 PH/9/-/1 EN 12697-27 Bituminous mixtures. Test methods for hot mix asphalt. Sampling will supersede BS EN 12697-27:2001 B/510/1 EN 12831-3 Heating systems and water based cooling systems in buildings. Method for calculation of the design heat load. Domestic hot water systems heat load and characterisation of needs will supersede BS EN 15316-3-1:2007 RHE/24 CEN/TR 13387-1 General safety guidelines. Safety philosophy and safety assessment will supersede PD CEN/TR 13387:2004 CW/1 CEN/TR 13387-2 General safety guidelines. Chemical hazards will supersede PD CEN/TR 13387:2004 CW/1 CEN/TR 13387-4 General safety guidelines. Thermal hazards will supersede PD CEN/TR 13387:2004 CW/1 CEN/TR 13387-5 General safety guidelines. Product information will supersede PD CEN/TR 13387:2004 CW/1 EN 13479 Welding consumables. General product standard for filler metals and fluxes for fusion welding of metallic materials will supersede BS EN ISO 13479:2009 WEE/-/1 EN 13639 Determination of total organic carbon in limestone B/516/12 EN ISO 15148:2002/A1 Hygrothermal performance of building materials and products. Determination of water absorption coefficient by partial immersion B/540 EN 15269-5:2014/A1 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware. Fire resistance of hinged and pivoted metal framed glazed doorsets and openable FSH/22/-/5 EN 15316-1 Heating systems and water based cooling systems in buildings. Method for calculation of system energy requirements and system efficiencies. General and Energy performance expression will supersede BS EN 15316-1:2007 RHE/24 EN 15430-1 Winter and road service area maintenance equipment. Data acquisition and transmission. In vehicle data acquisition will supersede BS EN 15430-1:2007+A1:2011 B/513 EN 15839:2012/A1 Railway applications. Testing for the acceptance of running characteristics of railway vehicles. Freight wagons. Testing of running safety under longitudinal compressive forces RAE/1/-/8 EN 16319:2013/A1 Fertilizers and liming materials. Determination of trace elements. Determination of cadmium, chromium, lead and nickel by inductively coupled plasma-atomic emission spectrometry (ICP-AES) after aqua regia dissolution CII/37 CEN/TS 16800 Validation of analytical methods EH/3/2 EN 16803-1 Space. Use of geo-positioning services for navigation and localization applications. Minimum Operational Performances definition methodology for GNSS-based positioning terminals used in road transport applications ACE/68 EN 16804 Diving equipment. Diving open heel fins. Requirements and test methods SW/136/8 EN 16805 Diving equipment. diving mask. Requirements and test methods SW/136/8 EN 16807 Liquid petroleum products. Bio-lubricants. Criteria and requirements of bio-lubricants and bio-based lubricants PTI/15 EN 16808 Petroleum and natural gas industries. Drilling and production equipment. Manual operated elevators PSE/17 EN ISO/IEC 17011 Conformity assessment. General requirements for accreditation bodies accrediting conformity assessment bodies will supersede BS EN ISO/IEC 17011:2004 CAS/1 EN ISO 17658 Welding. Imperfections in oxy fuel flame cuts, laser beam cuts and plasma cuts. Terminology WEE/-/1 EN 50367 Railway applications. Current collection systems. Technical criteria for the interaction between pantograph and overhead line (to achieve free access) will supersede BS EN 50367:2012 GEL/9/3 Update Standards October 2014 Prices may be subject to change. 37

New Work Started continued... EN 50614 Requirements for the preparation for re-use of waste electrical and electronic equipment GEL/111 EN 50637 Medical electrical equipment. Particular requirements for the basic safety and essential performance of medical beds for children CH/62/4 EN 60050-881 Advance edition of the International Electrotechnical Vocabulary. Radiology and radiological physics GEL/1 EN 60096-0-1:2012/A1 Radio frequency cables. Guide to the design of detail specifications. Coaxial cables EPL/46 EN 60305 Insulators for overhead lines with a nominal voltage above 1000 V ceramic or glass insulator units for a.c. systems. Characteristics of insulator units of the cap and pin type will supersede BS EN 60305:1996 PEL/36 EN 60433 Insulators for overhead lines with a nominal voltage above 1000 V. Ceramic insulators for a.c. systems. Characteristics of insulator units of the long rod type will supersede BS EN 60433:1999 PEL/36 EN 60603-7:2009/A2 Connectors for electronic equipment. Detail specification for 8-way, unshielded, free and fixed connectors EPL/48 EN 61076-1:2006/A1 Connectors for electronic equipment. Product requirements. Generic specification EPL/48 EN 61076-3-120 Connectors for electronic equipment. Product requirements. Rectangular connectors. Detail specification for rewirable power connector with snap locking for 250 v d.c. and rated current of 30a EPL/48 EN 61169-58 Radio-frequency connectors. Sectional specification for RF coaxial connectors with blind-mate coupling. Characteristic impedance 50 ohm (type SBMA) EPL/46 EN 61340-2-3 Electrostatics. Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation will supersede BS EN 61340-2-3:2000 GEL/101 EN 61800-3:2004/A2 Adjustable speed electrical power drive systems. EMC requirements and specific test methods PEL/22 EN 61810-2 Electromechanical elementary relays. Reliability will supersede BS EN 61810-2:2011 EPL/94 EN 62196-2 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories PEL/23/4 EN 62282-4-102 Fuel cell technologies. Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Performance test methods for electrically powered industrial trucks GEL/105 EN 62351-11 Power systems management and associated information exchange. Data and communications security. Security for XML files PEL/57 EN 62911 Safety of electronic equipment within the field of audio/video, information technology and communication technology EPL/108 EN ISO 80601-2-55 Medical electrical equipment. Particular requirements for the basic safety and essential performance of respiratory gas monitors will supersede BS EN ISO 80601-2-55:2011 CH/121 ISO 2418 Leather. Chemical, physical and mechanical and fastness tests. Sampling location TCI/69 ISO 2420 Leather. Physical and mechanical tests. Determination of apparent density TCI/69 ISO 2631-5 Mechanical vibration and shock. Evaluation of human exposure to whole-body vibration. Method for evaluation of vibration containing multiple shocks GME/21 ISO 3008-3 Fire resistance test. Door and shutter assemblies. Horizontally oriented FSH/22 ISO 3575 Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities will supersede BS ISO 3575:2011 ISE/109 ISO 4044 Leather. Chemical tests. Preparation of chemical test samples will supersede BS EN ISO 4044:2008 TCI/69 ISO 4945 Steel. Determination of nitrogen content. Spectrophotometric method will supersede BS EN ISO 4945:2009 ISE/102 ISO 5182 Resistance welding. Materials for electrodes and ancillary equipment will supersede NC/BS ISO 5182:2008 WEE/29 ISO 5402-1 Leather. Determination of flex resistance. Flexometer method TCI/69 ISO 6605 Hydraulic fluid power. Hoses and hose assemblies. Test methods will supersede BS ISO 6605:2002 MCE/18/-/4 ISO 6707-3 Buildings and civil engineering works. Vocabulary. Sustainability terms CB/101/-/2 ISO 6930-2 High yield strength steel plates and wide flats for cold forming. Delivery condition for normalized, normalized rolled and as-rolled steels ISE/103 ISO 9015-2 Destructive tests on welds in metallic materials. Hardness testing. Microhardness testing of welded joints will supersede BS EN ISO 9015-2:2011 WEE/46 ISO 9599 Copper, lead and zinc sulfide concentrates. Determination of hygroscopic moisture in the analysis sample. Gravimetric method NFE/36 ISO 9897-3 Freight containers. Container equipment data exchange (CEDEX). General communication codes. Tank containers will partially supersede BS ISO 9897:1997 TW/1 38 Update Standards October 2014 Prices may be subject to change.

ISO 9897-4 equipment data exchange (CEDEX). General communication codes. Special purpose containers will partially supersede BS ISO 9897:1997 TW/1 ISO 9928-2 Cranes. Crane driving manual. Mobile crane operators MHE/3/5 ISO 10656 Electric resistance welding. Integrated transformers for welding guns WEE/29 ISO 10718 Cork stoppers. Enumeration of colony-forming units of yeasts, moulds and bacteria capable of growth in an alcoholic medium will supersede BS ISO 10718:2002 PRI/81 ISO 12122-3 Timber structures. Determination of characteristic values. Glued laminated timber B/518 ISO 12122-4 Timber structures. Determination of characteristic values. Engineered wood products B/518 ISO 12800 Nuclear fuel technology. Guide to the measurement of the specific surface area of uranium oxide powders by the BET method NCE/9 ISO 13338 Determination of tissue corrosiveness of a gas or gas mixture PVE/3 ISO/IEC 13818-1:1997/A4 Information technology. Generic coding of moving pictures and associated audio information. Systems IST/37 ISO/IEC 13818-1:1997/A5 Information technology. Generic coding of moving pictures and associated audio information. Systems IST/37 ISO/IEC 13818-1:1997/A6 Information technology. Generic coding of moving pictures and associated audio information. Systems IST/37 ISO 13976 Hot-rolled steel sheet in coils of structural quality and heavy thickness will supersede BS ISO 13976:2005 ISE/109 ISO/IEC 14496-4:2004/A44 Information technology. Coding of audio-visual objects. Conformance testing IST/37 ISO/IEC 14496-5:2001/A38 Information technology. Coding of audio-visual objects. Reference software IST/37 ISO/IEC 14496-10:2003/A1 Information technology. Coding of audio-visual objects. Advanced video coding IST/37 ISO/IEC 14543-3-11 Information technology. Home electronic system (HES) architecture. Frequency Modulated Wireless Short-Packet (FMWSP) protocol optimised for energy harvesting architecture and lower layer protocols ICT/-/1 ISO 14590 Cold-reduced steel sheet of high tensile strength and low yield point with improved formability ISE/109 ISO/IEC 15118-5 Road vehicles. Vehicle to grid communication interface. Physical and data link layer conformance tests AUE/16 ISO 15461 Steel forgings. Testing frequency, sampling conditions and test methods for mechanical tests ISE/107 ISO 16000-37 Indoor air. Strategies for the measurement of PM 2.5 EH/2/5 ISO 16301 Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for hydraulic jacks applications. Specification PRI/66 ISO/IEC TR 16337 Systems engineering. Systems engineering handbook IST/15 ISO/TS 16843-2 Health Informatics. Categorial structures for representation of acupuncture. Needling IST/35 ISO 16845-1 Road vehicles. Controller area network (CAN) conformance test plan. Data link layer and physical signalling AUE/16 ISO/IEC 17034 General requirements for the competence of reference material producers CAS/1 ISO 17232 Leather. Physical and mechanical tests. Determination of heat resistance of patent leather TCI/69 ISO 17233 Leather. Physical and mechanical tests. Determination of cold crack temperature of surface coatings TCI/69 ISO 17637 Non-destructive testing of welds. Visual testing of fusion-welded joints will supersede BS EN ISO 17637:2011 WEE/46 ISO 17638 Non-destructive testing of welds. Magnetic particle testing will supersede BS EN ISO 17638:2009 WEE/46 ISO 17641-2 Destructive tests on welds in metallic materials. Hot cracking tests for weldments. Arc welding processes. Self-restraint tests will supersede BS EN ISO 17641-2:2005 WEE/46 ISO/IEC 18521-1 Mixed and Augmented Reality (MAR) concepts and reference model. The reference model IST/31 ISO/IEC 18521-2 Mixed and Augmented Reality (MAR) concepts and reference model. Physical sensors IST/31 ISO/IEC 18521-3 Mixed and Augmented Reality (MAR) concepts and reference model. Real character representation IST/31 ISO 19227 Cleaning of orthopedic implants. General requirements CH/150 ISO 19377 Heavy commercial vehicles. Emergency braking on a defined path. Test method for trajectory measurements AUE/15 ISO/PAS 19450 Automation systems and integration. Objectprocess methodology AMT/5 ISO/TR 19473 Space systems. Best practices for orbit elements at payload. LV separation ACE/68 ISO/IEC TS 19568 C++ extensions for library fundamentals IST/5 Update Standards October 2014 Prices may be subject to change. 39

New Work Started continued... ISO/IEC TS 19570 C++ extensions for parallelism IST/5 ISO 19618 Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement method for normal spectral emissivity using blackbody reference with an FTIR spectrometer RPI/13 ISO 19688 Rotodymanic pumps. Hydraulic performance acceptance test using model pump MCE/6 ISO/IEC 19788-2:2011/A1 Information technology. Learning, education and training. Metadata for learning resources. Dublin Core elements IST/43 ISO/TR 19948 Conformity assessment and certification. Process for earth-moving machinery B/513/1 ISO 20137 Leather. Chemical tests. Guidelines for testing critical chemicals in leather TCI/69 ISO/TR 20183 Sports and other recreational facilities and equipment. Injury and safety definitions and thresholds. Guidelines for their inclusion in standards SW/136/22 ISO 20187 Inflatable play equipment. Safety requirements and test methods SW/136/22 ISO 21940-12 Mechanical vibration. Rotor balancing. Procedures and tolerances for rotors with flexible behaviour GME/21/5 ISO 22829 Resistance welding. Transformer-rectifier for welding guns with integrated transformers. Transformer-rectifier units operating at 1000 Hz frequency will supersede BS ISO 22829:2007 WEE/29 ISO/IEC 23000-15 Information technology. Multimedia application format (MPEG-A). Multimedia preservation application format IST/37 ISO/IEC 23001-8:2013/A2 Information technology. MPEG systems technologies. Coding-independent code points IST/37 ISO/IEC 23002-5:2013/A2 Information technology. MPEG video technologies. Reconfigurable media coding conformance and reference software IST/37 ISO 23551-2 Safety and control devices for gas burners and gas-burning appliances. Particular requirements. Pressure regulators GSE/22 ISO 23910 Leather. Physical and mechanical tests. Measurement of stitch tear resistance TCI/69 ISO/TR 24525 Service activities relating to drinking water supply systems and wastewater systems. Crisis management. Examples of practiced crisis management CB/503 ISO/IEC 29110-4-1 Software engineering. Lifecycle profiles for Very Small Entities (VSEs). Profile specifications. Generic profile group IST/15 ISO/TR 29263 Cereals and cereal products. Sampling studies AW/4 ISO/IEC 30105-4 IT Enabled Services/Business Process Outsourcing Lifecycle Processes ITESBPO standard. Terms and concepts IST/60/3 ISO 30405 Human resource management. Guidelines on recruitment HCS/1 ISO/IEC 33050-4 Information technology. Process assessment. A process reference model for information security management IST/15 ISO/IEC 33070-4 Information technology. Process assessment. A process assessment model for information security management IST/15 ISO 52022-1 Energy performance of buildings Thermal, solar and daylight properties of building components and elements B/540/2 ISO/TR 52022-2 Energy performance of buildings Thermal, solar and daylight properties of building components and elements. Explanation and justification B/540/2 ISO 52022-3 Energy performance of buildings. Thermal, solar and daylight properties of building components and elements. Detailed calculation method for solar protection devices combined with glazing B/540/2 IEC/TS 60079-32-1:2013/A1 Explosive atmospheres. Electrostatic hazards. Guidance EXL/31 IEC/TR 61000-1-7 Electromagnetic compatibility (EMC). General. Power factor in single phase systems under nonsinusoidal conditions GEL/210 IEC/TS 61400-3-2 Wind turbines. Design requirements for floating offshore wind turbines PEL/88 IEC/TS 61851-3-1 Electric vehicles conductive power supply system. General requirements for light electric vehicles (LEV) AC and DC conductive power supply systems PEL/69 IEC/TS 61851-3-2 Electric vehicles conductive power supply system. Requirements for light electric vehicles (LEV) DC off-board conductive power supply systems PEL/69 IEC 62908-1-2 Touch and interactive displays. Terminology and letter symbols EPL/47 IEC 62908-12-10 Touch and interactive displays. Touch performance measuring methods EPL/47 IEC/TS 62941 Guideline for increased confidence in PV module design qualification and type approval GEL/82 ISO 80601-2-56 Medical electrical equipment. Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement will supersede BS EN ISO 80601-2-56:2012 CH/121/5 40 Update Standards October 2014 Prices may be subject to change.

DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT NATIONAL BRITISH STANDARDS You may comment online on any British Standard of national origin using the BSI Draft Review system. All you need to do is register at http://drafts.bsigroup.com. This service is free of charge. Deadlines for receipt of comments on each of the individual drafts can be found at http://drafts.bsigroup.com. The deadline for the following drafts is 30 November, 2014 unless otherwise stated. If you would like to receive these drafts in hard copy format, they are available for a fee from BSI Customer Services (see How to order on page 2). 14/30277275 DC BS 5446-3 Fire detection and fire alarm devices for dwellings. Specification for fire and carbon monoxide alarm systems for deaf and hard of hearing people FSH/12/2 14/30291596 DC BS 8500-1 Concrete. Complementary British Standard to BS EN 206. Method of specifying and guidance for the specifier B/517/1 14/30291598 DC BS 8500-2 Concrete. Complementary British Standard to BS EN 206. Specification for constituent materials and concrete B/517/1 14/30295204 DC BS 7629-1 Electric cables. Specification for 300/500 V fire resistant screened cables having low emission of smoke and corrosive gases when affected by fire for fixed installations. Multicore cables GEL/20/17 14/30295810 DC BS 5306-9 Fire extinguishing installations and equipment on premises. Recharging of portable fire extinguishers. Code of practice FSH/2 14/30298953 DC BS 76000 Management system for valuing people in organizations. Requirements & guidance for use HCS/1 11 January, 2015 DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT ADOPTIONS You may comment online on draft standards issued by CEN and ISO. The BSI Draft Review system has been modified to accommodate a wider range of standards content. The purpose of the website is to enhance access to Drafts for Public Comment for the wider community, make comments more visible and move into collaborative working practices. All you need to do is register at http://drafts.bsigroup.com. This service is free of charge. Please note that CENELEC and IEC standards are not included on the BSI Draft Review system at this time, but are available in hard copy format from BSI Customer Services. All draft British Standards are available in hard copy format from BSI Customer Services (see How to order on page 2). Most drafts are charged at 10.00 to members and 20.00 for non-members. Larger draft documents are charged at a higher price according to the number of pages and, are priced individually below. Comments on all Draft British Standards are welcome and should be sent to Debbie Stead, Head of Committee Service Centre and International Secretariat, BSI Group, 389 Chiswick High Road, London W4 4AL by 30 November, 2014 unless otherwise stated, to be considered by the relevant BSI committee. Draft standards may be modified before adoption and issue as British Standards. 14/30213618 DC BS ISO/IEC 27034-2 Information technology. Security techniques. Application security. Organization normative framework IST/33 18 October, 2014 14/30231508 DC BS ISO 13065 Sustainability criteria for bioenergy PTI/20 19 October, 2014 14/30235257 DC BS EN 50641 Railway applications. Fixed installations. Requirements for the validation of simulation tools used for the design of traction power supply systems GEL/9/3 31 December, 2014 14/30257546 DC BS ISO 17966 Assistive products for personal hygiene that support users. Requirements and test methods 18.00 members, 36.00 non-members CH/173 24 October, 2014 14/30258642 DC BS ISO 17464 Pneumatic tubes for automotive vehicles. Technical requirements and test methods AUE/4 1 November, 2014 14/30259002 DC BS ISO 17745 Steel wire ring mesh panels. Definitions and specifications ISE/106 14 November, 2014 14/30259005 DC BS ISO 17746 Steel wire rope net panels and rolls. Definitions and specifications ISE/106 14 November, 2014 14/30263822 DC BS ISO 15686-5 Buildings and constructed assets. Service-life planning. Life-cycle costing CB/101 10 November, 2014 14/30265605 DC BS ISO 17859 Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement method of piezoelectric strain at high electric field RPI/13 30 October, 2014 14/30266750 DC BS ISO 16711 Seismic assessment and retrofit of concrete structures B/517/8 19 October, 2014 14/30267228 DC BS EN 61340-5-1 Electrostatics. Protection of electronic devices from electrostatic phenomena. General requirements GEL/101 17 October, 2014 14/30267668 DC BS ISO 17543-1 Machines tools. Test conditions for accessory spindle heads. Horizontal spindle machines MTE/1/2 25 October, 2014 Update Standards October 2014 Prices may be subject to change. 41

Drafts for Public Comment continued... 14/30268571 DC BS ISO 16642 Computer applications in terminology. Terminological markup framework TS/1 26 October, 2014 14/30268888 DC BS ISO 16631 Ductile iron pipes, fittings, accessories and their joints compatible with plastic (PVC and PE) piping systems for water applications PSE/10 9 November, 2014 14/30270614 DC BS EN 14065 Textiles. Laundry processed textiles. Biocontamination control system TCI/82/1 14/30271267 DC BS ISO 7364 Ships and marine technology. Deck machinery. Accommodation ladder winches SME/32/-/1 13 October, 2014 14/30272154 DC BS EN 16779-1 Textile child care articles. Safety requirements and test methods for children s cot duvets. Duvet (excluding duvet covers) TCI/66/-/1 14 December, 2014 14/30272157 DC BS EN 16780 Textile child care articles. Safety requirements and test methods for children s cot bumpers TCI/66/-/1 14 December, 2014 14/30272160 DC BS EN 16781 Textile child care articles. Safety requirements and test methods for children s sleep bags TCI/66/-/1 14 December, 2014 14/30273218 DC BS ISO 13381-1 Condition monitoring and diagnostics of machines. Prognostics. General guidelines GME/21/7 9 October, 2014 14/30273761 DC BS ISO 18471 Agricultural irrigation equipment. Filters. Verification of filtration grade AGE/30 31 October, 2014 14/30274168 DC BS ISO 6020-3 Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series. Compact series with bores from 250 mm to 500 mm MCE/18/-/3 31 October, 2014 14/30276392 DC BS ISO 28007-1 Ships and marine technology. Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract) SME/32 19 October, 2014 14/30277524 DC BS ISO 19162 Geographic information. Well known text representation of coordinate reference systems IST/36 30 October, 2014 14/30278505 DC BS ISO/IEC 27033-1 Information technology. Security techniques. Network security. Overview and concepts IST/33/-/4 19 October, 2014 14/30279327 DC BS EN 61800-3 A2 Adjustable speed electrical power drive systems. EMC requirements and specific test methods 18.00 members, 36.00 non-members PEL/22 14/30280554 DC BS ISO 14448 Low modulus adhesives for exterior tile finishing B/539 17 October, 2014 14/30280597 DC BS ISO 1219-3 Fluid power systems and components. Graphical symbols and circuit diagrams. Symbol modules and connected symbols in circuit diagrams MCE/18 31 October, 2014 14/30280850 DC BS EN 60384-1 Fixed capacitors for use in electronic equipment. Generic specification EPL/40X 1 November, 2014 14/30280901 DC BS ISO 19160-1 Addressing. Conceptual model IST/36 18 November, 2014 14/30281265 DC BS EN ISO 17881-1 Textiles. Determination of certain flame retardants. Brominated flame retardants TCI/80 4 January, 2015 14/30281268 DC BS EN ISO 17881-2 Textiles. Determination of certain flame retardants. Phosphorus flame retardants TCI/80 4 January, 2015 14/30281542 DC BS EN ISO 21549-7 Health informatics. Patient healthcard data. Medication data IST/35 14/30282337 DC BS ISO 17123-8 Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. GNSS field measurement systems in real-time kinematic (RTK) CPW/172 13 October, 2014 14/30282729 DC BS ISO/IEC 24770-62 Information technology. Real-time locating system (RTLS) device performance test methods. Test methods for air interface communication at 2,4 GHz. Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface IST/34 25 October, 2014 14/30284280 DC BS ISO 6721-10 Plastics. Determination of dynamic mechanical properties. Complex shear viscosity using a parallel-plate oscillatory rheometer PRI/21 16 October, 2014 42 Update Standards October 2014 Prices may be subject to change.

14/30284635 DC BS ISO 11665-11 Measurement of radioactivity in the environment. Air. Radon-222. Test method for soil gas with sampling at depth NCE/2 18 November, 2014 14/30285113 DC BS EN ISO 780 Packaging. Distribution packaging. Graphical symbols for handling and storage of packages PKW/0 14 December, 2014 14/30285138 DC BS ISO/IEC 29167-14 Information technology. Automatic identification and data capture techniques. Crypto suite AES OFB security services for air interface communications IST/34 18 October, 2014 14/30285705 DC BS ISO 21298 Health informatics. Functional and structural roles IST/35 31 October, 2014 14/30285733 DC BS EN ISO 16092-1 Machine tools safety. Presses. General safety requirements MTE/1/1 15 January, 2015 14/30285741 DC BS ISO 17740-1 Building construction machinery and equipment. Concrete placing systems for stationary equipment. Terminology and commercial specifications B/513 31 October, 2014 14/30287656 DC BS ISO/IEC 10118-1 Information technology. Security techniques. Hash-functions. General IST/33 10 November, 2014 14/30287699 DC BS ISO/IEC 29192-4 A1 Information technology. Security techniques. Lightweight cryptography. Mechanisms using asymmetric techniques IST/33 10 November, 2014 14/30287994 DC BS ISO 13167 Water quality. Plutonium, americium, curium and neptunium. Test method using alpha spectrometry EH/3/8 8 November, 2014 14/30288062 DC BS EN 61377 Railway applications. Rolling stock. Combined test method for traction systems GEL/9/2 14 November, 2014 14/30288421 DC BS EN ISO/IEC 80369-6 Small bore connectors for liquids and gases in healthcare applications. Connectors for neuraxial applications CH/210/5 4 January, 2015 14/30291315 DC BS ISO 22900-2 Road vehicles. Modular vehicle communication interface (MVCI). Diagnostic protocol data unit (D-PDU API) 33.00 members, 66.00 non-members AUE/16 11 November, 2014 14/30291326 DC BS EN ISO 10360-12 Geometrical Product Specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS). Articulated arm coordinate measurement machines (CMM) TDW/4 21 December, 2014 14/30292302 DC BS ISO 10896-5 Rough-terrain trucks. Safety requirements and verification. Interface between rough-terrrain truck and integrated personnel work platform MHE/7 9 November, 2014 14/30292308 DC BS ISO 18479-1 Rough-terrain trucks. Nonintegrated personnel work platforms. Design, safety requirements and verification MHE/7 9 November, 2014 14/30292311 DC BS EN ISO 105-G01 Textiles. Tests for colour fastness. Colour fastness to nitrogen oxides TCI/81 14/30292857 DC BS EN 15193-1 Energy performance of buildings. Module M9. Energy requirements for lighting. Specifications EL/1 14 December, 2014 14/30292915 DC BS ISO 18488 Polyethylene (PE) materials for piping systems. Determination of Strain Hardening Modulus in relation to slow crack growth. Test method PRI/88/4 17 October, 2014 14/30292918 DC BS ISO 18489 Polyethylene (PE) materials. Determination of resistance to slow crack growth under cyclic loading. Cracked Round Bar test method PRI/88/4 17 October, 2014 14/30294680 DC BS ISO 19259 Plain bearings. Bearings with embedded solid lubricant MCE/12 8 November, 2014 14/30295213 DC BS EN 61753-382-2 Fibre optic interconnecting devices and passive components. Performance standard. Non-connectorised single-mode bidirectional G-PON-NGA WWDM devices for category C. Controlled environment GEL/86/2 3 November, 2014 14/30295243 DC BS EN 62909-1 Bi-directional grid connected power converters. General requirements PEL/22 24 October, 2014 14/30295496 DC BS ISO 15394 Packaging. Bar code and twodimensional symbols for shipping, transport and receiving labels PKW/0 13 October, 2014 14/30295940 DC BS ISO/IEC 18046-4 Information technology. Radio frequency identification device performance test methods. Test methods for performance of RFID gates in libraries IST/34 25 October, 2014 Update Standards October 2014 Prices may be subject to change. 43

Drafts for Public Comment continued... 14/30296008 DC BS ISO 6133 Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength PRI/22 3 November, 2014 14/30296011 DC BS ISO 6505 Rubber, vulcanized or thermoplastic. Determination of tendency to adhere to and corrode metals PRI/22 13 October, 2014 14/30296750 DC BS EN 1373 Adhesives. Test method for adhesives for floor and wall coverings. Shear test PRI/52 14/30296753 DC BS EN 1372 Adhesives. Test method for adhesives for floor and wall coverings. Peel test PRI/52 14/30296756 DC BS EN 1902 Adhesives. Test method for adhesives for floor coverings and wall coverings. Shear creep test PRI/52 14/30296759 DC BS EN 1903 Adhesives. Test method for adhesives for plastic or rubber floor coverings or wall coverings. Determination of dimensional changes after accelerated ageing PRI/52 14/30297319 DC BS ISO 17449 Road vehicles. Safety glazing materials. Test methods for properties of electrically heated glazing AUE/10 31 October, 2014 14/30297388 DC BS ISO 9876 Ships and marine technology. Marine facsimile receivers for meteorological charts EPL/80 25 October, 2014 14/30297391 DC BS ISO 22554 Ships and marine technology. Propeller shaft revolution indicators. Electric type and electronic type EPL/80 20 October, 2014 14/30297790 DC BS EN ISO 6385 Ergonomic principles in the design of work systems PH/9 14 December, 2014 14/30298486 DC BS EN 50500 A1 Measurement procedures of magnetic field levels generated by electronic and electrical apparatus in the railway environment with respect to human exposure GEL/9 21 November, 2014 14/30298714 DC BS ISO/IEC 19785-1 Information Technology. Common Biometric Exchange Formats Framework. Data Element Specification IST/44 10 November, 2014 14/30299433 DC BS EN 62906-1-2 Laser display devices. Terminology and Letter symbols EPL/47 20 October, 2014 14/30299473 DC BS EN ISO 20957-9 Stationary training equipment. Elliptical trainers, additional specific safety requirements and test methods SW/136/4 21 December, 2014 14/30300499 DC BS ISO 18852 Rubber compounding ingredients. Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA) PRI/50 5 November, 2014 14/30300667 DC BS ISO 2575 A5 Road vehicles. Symbols for controls, indicators and telltales AUE/12 18 November, 2014 14/30300966 DC BS EN 1442 LPG equipment and accessories. Transportable refillable welded steel cylinders for LPG. Design and construction PVE/19 31 December, 2014 14/30301251 DC BS EN 13160-1 Leak detection systems. General principles PVE/393/2 14/30301254 DC BS EN 13160-4 Leak detection systems. Requirements and test/assessment methods for sensor based leak detection systems PVE/393/2 14/30301257 DC BS EN 13160-3 Leak detection systems. Requirements and test/assessment methods for liquid systems for tanks PVE/393/2 14/30301260 DC BS EN 13160-2 Leak detection systems. Requirements and test/assessment methods for pressure and vacuum systems PVE/393/2 14/30301263 DC BS EN 13160-5 Leak detection systems. Requirements and test/assessment methods for in-tank gauge systems and pressurised pipework systems PVE/393/2 14/30301266 DC BS EN 13160-7 Leak detection systems. Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets PVE/393/2 14/30301269 DC BS EN 13160-6 Leak detection systems. Sensors in monitoring wells PVE/393/2 14/30301275 DC BS EN 16763 Services for fire safety systems and security systems FSS/0 14 November, 2014 14/30301580 DC BS EN 16783 Thermal insulation products. Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations B/540 4 January, 2015 14/30302452 DC BS EN 13561 External blinds and awnings. Performance requirements including safety B/538 14 December, 2014 14/30302455 DC BS EN 13659 Shutters and external venetian blinds. Performance requirements including safety B/538 14 December, 2014 14/30303007 DC BS EN ISO 17491-4 A1 Protective clothing. Test methods for clothing providing protection against chemicals. Determination of resistance to penetration by a spray of liquid (spray test) PH/3/3 21 December, 2014 14/30303334 DC BS ISO 10816-6 A1 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Reciprocating machines with power ratings above 100 kw GME/21/5 19 October, 2014 44 Update Standards October 2014 Prices may be subject to change.

14/30303574 DC BS ISO 13926-2 A1 Pen systems. Plunger stoppers for pen-injectors for medical use CH/212 19 October, 2014 14/30303591 DC BS EN ISO 19694-1 Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries. General aspects EH/2/1 21 December, 2014 14/30303595 DC BS EN ISO 19694-2 Stationary source emissions. Greenhouse Gas (GHG) emissions in energyintensive industries. Iron and steel industry EH/2/1 21 December, 2014 14/30303599 DC BS EN ISO 19694-3 Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries. Cement industry EH/2/1 21 December, 2014 14/30303603 DC BS EN ISO 19694-4 Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries. Aluminium industry EH/2/1 21 December, 2014 14/30303607 DC BS EN ISO 19694-5 Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries. Lime industry EH/2/1 21 December, 2014 14/30303611 DC BS EN ISO 19694-6 Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries. Ferroalloy industry EH/2/1 21 December, 2014 14/30303645 DC BS ISO/IEC 19987 Information technology. EPC Information services. Specification 18.00 members, 36.00 non-members ICT/-/1 25 October, 2014 14/30303648 DC BS ISO/IEC 19988 Information technology. GS1 Core business vocabulary (CBV) ICT/-/1 25 October, 2014 14/30303732 DC BS EN 14322 Wood-based panels. Melamine faced board for interior uses. Definition, requirements and classification B/541 14 December, 2014 14/30303776 DC BS EN 13285 Unbound mixtures. Specifications B/510/4 14 December, 2014 14/30304013 DC BS ISO 5488 Ships and marine technology. Accommodation ladders SME/32/-/1 26 October, 2014 14/30304016 DC BS ISO 7061 Ships and marine technology. Aluminium shore gangways for seagoing vessels SME/32/-/1 26 October, 2014 14/30304019 DC BS ISO 5781 Hydraulic fluid power. Pressurereducing valves, sequence valves, unloading valves, throttle valves and check valves. Mounting surfaces MCE/18/-/5 31 October, 2014 14/30304022 DC BS ISO 7368 Hydraulic fluid power. Two-port slip-in cartridge valves. Cavities MCE/18/-/5 31 October, 2014 14/30304058 DC BS EN ISO 17855-2 Plastics. Polyethylene (PE) moulding and extrusion materials. Preparation of test specimens and determination of properties PRI/82 1 January, 2015 14/30304101 DC BS EN 16784 Timber structures. Test methods. Determination of the long term behaviour of coated and uncoated dowel-type fasteners B/518 4 January, 2015 14/30304113 DC BS EN 16497-2 Chimneys. Concrete System Chimneys. Balanced flue applications B/506 28 December, 2014 14/30304116 DC BS EN 1359 Gas meters. Diaphragm gas meters GSE/25 21 December, 2014 14/30304127 DC BS EN 16782 Conservation of cultural heritage. Cleaning of porous inorganic materials. Laser cleaning techniques for cultural heritage B/560 21 December, 2014 14/30304346 DC BS EN ISO 17782 Petroleum, petrochemical and natural gas industries. Qualification of manufacturers of special materials PSE/17 4 January, 2015 14/30304354 DC BS EN ISO 8362-5 Injection containers and accessories. Freeze drying closures for injection vials CH/212 4 January, 2015 14/30304382 DC BS ISO 34-1 Rubber, vulcanized or thermoplastic. Determination of tear strength. Trouser, angle and crescent test pieces PRI/22 10 November, 2014 14/30304385 DC BS ISO 34-2 Rubber, vulcanized or thermoplastic. Determination of tear strength. Small (Delft) test pieces PRI/22 10 November, 2014 14/30304453 DC BS EN 12916 Petroleum products. Determination of aromatic hydrocarbon types in middle distillates. High performance liquid chromatography method with refractive index detection PTI/15 4 January, 2015 14/30304459 DC BS EN 16773 Aluminium and aluminium alloys. Guideline for the production of foil-stock in the field of semi rigid foodstuff containers NFE/35 4 January, 2015 14/30304462 DC BS EN 14196 Geosynthetics. Test methods for measuring mass per unit area of clay geosynthetic barriers B/553 4 January, 2015 14/30304657 DC BS ISO 4708 Composition cork. Gasket material. Test methods PRI/81 31 October, 2014 Update Standards October 2014 Prices may be subject to change. 45

Drafts for Public Comment continued... 14/30304762 DC BS EN 14161 A1 Petroleum and natural gas industries. Pipeline transportation systems PSE/17 4 January, 2015 14/30304804 DC BS EN 14405 Characterization of waste. Leaching behaviour test. Up-flow percolation test (under specified conditions) B/508/3 31 December, 2014 14/30311815 DC BS EN 60305 Insulators for overhead lines with a nominal voltage above 1000 V. Ceramic or glass insulator units for a a.c. systems. Characteristics of insulator units of the cap and pin type PEL/36 10 October, 2014 14/30311824 DC BS EN 60433 Insulators for overhead lines with a nominal voltage above 1000 V. Ceramic insulators for a.c. systems. Characteristics of insulator units of the long rod type PEL/36 10 October, 2014 14/30311867 DC BS EN 61810-2 Electromechanical elementary relays. Reliability EPL/94 10 September, 2014 14/30312005 DC BS EN 61770 A1 Electric appliances connected to the water mains. Avoidance of backsiphonage and failure of hose-sets CPL/61 28 November, 2014 14/30312008 DC BS EN 61340-2-3 Electrostatics. Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation GEL/101 14/30312012 DC BS EN 62841-2-11 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery. Safety. Particular requirements for hand-held reciprocating saws (jig and sabre saws) CPL/116 24 October, 2014 14/30312016 DC BS EN ISO/IEC 60079-13 Explosive atmospheres. Equipment protection by pressurized room p and artificially ventilated room v EXL/31 24 October, 2014 14/30312083 DC BS EN 61784 A1 Industrial communication networks. Profiles. Part 5-4. Installation of fieldbuses. Installation profiles for CPF 4. Part 5-10. Installation of fieldbuses. Installation profiles for CPF 10. Part 5-12. Installation of fieldbuses. Installation profiles for CPF 12. Part 5-15. Installation of fieldbuses. Installation profiles for CPF 15 10 October, 2014 14/30312344 DC PD IEC/PAS 60127-8 Miniature fuses. Fuse resistors with particular overcurrent protection PEL/32 14/30312368 DC BS EN 60096-0-1 A1 Radio frequency cables. Guide to the design of detail specifications. Coaxial cables EPL/46 28 October, 2014 14/30312544 DC BS EN 62908-1-2 Touch and interactive displays. Terminology and letter symbols EPL/47 14/30312548 DC BS EN 62908-12-10 Touch and interactive displays. Touch performance measuring methods EPL/47 14/30312597 DC BS EN 62828-3 Reference conditions and procedures for testing industrial measurement transmitters. Specific procedures for temperature transmitters GEL/65/2 14/30312641 DC BS HD 60364-4-46 Low-voltage electrical installations. Protection for safety. Isolation and switching JPEL/64 14/30312645 DC BS HD 60364-5-537 Low voltage electrical installations. Selection and erection of electrical equipment. Switchgear and controlgear. Isolation and switching JPEL/64 14/30312685 DC BS EN 16250-1 Levels of performance and acceptance for street cleaning and municipal waste management services. General requirements B/508/1 14/30312710 DC BS EN 62911 Audio, video and information technology equipment. Routine electrical safety testing in production EPL/108 3 October, 2014 14/30312868 DC BS EN 61869-14 Instrument Transformers. Specific Requirements for DC Current Transformers PEL/38 5 November, 2014 14/30312880 DC BS EN 61869-15 Instrument Transformers. Specific Requirements for DC Voltage Transformers PEL/38 5 November, 2014 14/30312943 DC PD IEC/TR 61000-1-7 Electromagnetic compatibility (EMC). General. Power factor in single phase systems under non-sinusoidal conditions GEL/210 28 October, 2014 14/30312966 DC BS EN 62841-2-14 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery. Safety. Particular requirements for hand-held planers CPL/116 7 November, 2014 14/30312971 DC BS EN 62341-6-3 Organic light emitting diode (OLED) displays. Measuring methods of image quality EPL/47 10 October, 2014 14/30313073 DC BS EN 61591 A12 Household range hoods and other cooking fume extractors. Methods for measuring performance CPL/59 5 November, 2014 14/30313093 DC BS EN 62317-12 Ferrite cores. Dimensions. Ring cores EPL/51 3 November, 2014 14/30313143 DC BS EN 62931 GX16t-5 capped tubular LED lamp. Safety specifications CPL/34/1 3 November, 2014 46 Update Standards October 2014 Prices may be subject to change.

NEW Energy Savings Opportunity Scheme launched In October 2012, the EU produced the Energy Efficiency Directive, specifying all member countries to create an energy audit scheme to ensure the achievement of the EU s 2020 target on energy efficiency. The Department of Energy and Climate Change (DECC) responded by creating the Energy Savings Opportunity Scheme (ESOS) which mandates all non-sme organizations to carry out an energy audit by 5 December 2015. ESOS applies to large organizations that employ 250 or more staff or have an annual turnover in excess of 42m and an annual balance sheet total of around 36.5m. The government predicts that 7,300 UK organizations will be affected by ESOS. ESOS can help you: Reduce energy consumption - early estimates indicate that audits will lead to an average of 0.7% energy saving per enterprise Save costs - the net positive benefit to the UK of ESOS is predicted to be between 0.8bn and 3bn between 2015 and 2030 Lower carbon emissions As the world s leading international standard outlining best practice energy management, ISO 50001 paves the way to improved performance, lower energy bills and reduced carbon emissions. Buy the standard shop.bsigroup.com/usiso50001 Learn more shop.bsigroup.com/usesos To contact us visit shop.bsigroup.com/usesos or contact Customer Services quoting marketing reference code USESOS T +44 845 086 9001 F +44 20 8996 7001 orders@bsigroup.com shop.bsigroup.com/usesos Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 845 086 9001. BSI British Standards Institution 2014

Documents not issued as DPCs DOCUMENTS NOT ISSUED AS DPCs Comments can be sent by email or by post to named contacts at: BSI Group 389 Chiswick High Road London W4 4AL Tel: 020 8996 9000 EN 50514 Audio, video and information technology equipment. Routine electrical safety testing in production This document was issued by CENELEC under the Unique Acceptance Procedure straight for formal vote, skipping the enquiry stage. It was, therefore, not issued as a DPC. Contact: Snezhana Halacheva Email: snezhana.halacheva@bsigroup.com EPL/108 EN 61207-6 Expression of performance of gas analyzers. Photometric analyzers This document was not issued at DPC stage and has been approved for final voting stage. Contact: Snezhana Halacheva Email: snezhana.halacheva@bsigroup.com GEL/65/2 IEC 61196-10-1 Coaxial communication cables. Blank detail specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric This document was not issued as a draft for public comment since IEC changed the numbring reference from 61196-2 to 61196-10 and -10-1 which has caused some confuison. Part 10-1 is parallel voted yet -10 is not which has broken the link with the original DPC. Contact: Asghar Ashrafi Email: asghar.ashrafi@bsigroup.com EPL/46 ISO/DIS 2969 Cinematography. B-chain electro-acoustic response of motionpicture control rooms and indoor theatres. Specifications and measurements This document has recently been issued at DIS Vote Stage. Copies of the draft are available on request. Contact: Committee Service Centre Email: csc@bsigroup.com CPW/36 ISO/DIS 4633 Rubber seals. Joint rings for water supply, drainage and sewerage pipelines. Specification for material This document has recently been issued at DIS Vote Stage. Copies of the draft are available on request. Contact: Committee Service Centre Email: csc@bsigroup.com CH/205/03 ISO/DIS 17536-1 Road vehicles. Aerosol separator performance test for internal combustion engines. General This document has recently been issued at DIS Vote Stage. Copies of the draft are available on request. Contact: Committee Service Centre Email: csc@bsigroup.com MCE/22 CEN EUROPEAN STANDARDS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CEN but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards. EN 1021-1:2014 Furniture. Assessment of the ignitability of upholstered furniture. Ignition source smouldering cigarette FW/6 EN 1021-2:2014 Furniture. Assessment of the ignitability of upholstered furniture. Ignition source match flame equivalent FW/6 EN 1176-11:2014 Playground equipment and surfacing. Additional specific safety requirements and test methods for spatial network SW/65 EN 13001-2:2014 Crane safety. General design. Load actions MHE/3/1 EN 13001-3-2:2014 Cranes. General design. Limit states and proof of competence of wire ropes in reeving systems MHE/3/1 EN 13451-5:2014 Swimming pool equipment. Additional specific safety requirements and test methods for lane lines and dividing line SW/136/8 EN 15380-5:2014 Railway applications. Classification systems for railway vehicles. System Breakdown Structure (SBS) RAE/1 EN 15509:2014 Electronic fee collection. Interoperability application profile for DSRC EPL/278 EN 16207:2014 Railway applications. Braking. Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock RAE/4/-/1 EN 16264:2014 Pyrotechnic articles. Other pyrotechnic articles. Cartridges for powder actuated tools CII/47 EN 16291-2: Glass packaging. Screw finishes for pressure capsules. One way glass MCA 2 finish CORRIGENDUM 1:August 2014 to EN 16291-2:2013 PKW/0/-/7 EN 16309:2014+A1:2014 Sustainability of construction works. Assessment of social performance of buildings. Calculation methodology B/558 EN 16334:2014 Railway applications. Passenger alarm system. System requirements RAE/4/-/1 EN 16502:2014 Test method for the determination of the degree of soil acidity according to Baumann- Gully B/517/1 EN 16565:2014 Packaging. Flexible tubes. Test method to determine the orientation of the flip-top cap PKW/0/-/10 EN 16575:2014 Bio-based products. Vocabulary MI/2 CEN REPORTS CEN/TR 16721:2014 Bio-based products. Overview of methods to determine the bio-based content MI/2 Please do not send confirmation of orders placed by telephone as it can lead to duplication 48 Update Standards October 2014 Prices may be subject to change.

NEW New safety standards for the construction and installation of lifts BS EN 81:2014 - Safety rules for the construction and installation of lifts BS EN 81-20:2014 - Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 20: Passenger and goods passenger lifts BS EN 81-20 specifies the safety rules for permanently installed new passenger or goods passenger lifts. It covers lifts with traction, positive or hydraulic drive, serving defined landing levels, having a car designed for the transportation of people or people and goods, suspended by ropes or chains or jacks and moving between guide rails inclined not more than 15 to the vertical. The requirements of this standard also apply in cases where the use of lifts is by people with disabilities, in case of fire, potentially explosive atmosphere, extreme climate conditions, seismic conditions or transporting dangerous goods. BS EN 81-50:2014 Safety rules for the construction and installation of lifts - Examinations and tests - Part 50: Design rules, calculations, examinations and tests of lift components This standard specifies the design rules, calculations, examinations and tests of lift components which are referred to by other standards used for the design of passenger lifts, goods passenger lifts, goods only lifts, and other similar types of lifting appliances. The main changes to the standards include: Improvement in safety due to changes in proven technology Incorporation of essential health and safety requirements from the relevant EU Directives Elimination of reported errors Clarification of the text and incorporation of proposals resulting from interpretation requests Improvement of the references to other standards according to the progress in that field Read more and buy shop.bsigroup.com/usbsen81-20 To contact us visit shop.bsigroup.com/usbsen81-20 or contact Customer Services quoting marketing reference code USbsen81-20 T +44 845 086 9001 F +44 20 8996 7001 orders@bsigroup.com shop.bsigroup.com/usbsen81-20 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 845 086 9001. BSI British Standards Institution 2014

CENELEC Publications CENELEC PUBLICATIONS EUROPEAN RATIFIED TEXTS The documents listed below have recently been issued by CENELEC but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards. EN 60214-1:2014 (IEC 60214-1:2014) Tap-changers. Performance requirements and test methods PEL/14 EN 60268-4:2014 (IEC 60268-4:2014) Sound system equipment. Microphones EPL/100 EN 60335-1: Household and similar electrical appliances. Safety. General requirements AMENDMENT 11:August 2014 to EN 60335-1:2012 CPL/61 EN 60601-2-27:2014 (IEC 60601-2-27:2011) Medical electrical equipment. Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment CH/62/4 EN 60601-2-43: Medical electrical equipment. Particular requirements for basic safety and essential performance of X-ray equipment for interventional procedures CORRIGENDUM 1:August 2014 to EN 60601-2-43:2010 CH/62/2 EN 60705: (IEC 60705:2010/A1:2014) Household microwave ovens. Methods for measuring performance AMENDMENT 1:August 2014 to EN 60705:2012 CPL/59 EN 60728-1-1:2014 (IEC 60728-1-1:2014) Cable networks for television signals, sound signals and interactive services. RF cabling for two way home networks EPL/100/4 EN 60728-1-2:2014 (IEC 60728-1-2:2014) Cable networks for television signals, sound signals and interactive services. Performance requirements for signals delivered at the system outlet in operation EPL/100/4 EN 60728-1:2014 (IEC 60728-1:2014) Cable networks for television signals, sound signals and interactive services. System performance of forward paths EPL/100/4 EN 60770-3:2014 (IEC 60770-3:2014) Transmitters for use in industrial-process control systems. Methods for performance evaluation of intelligent transmitters GEL/65/2 EN 60794-1-24:2014 (IEC 60794-1-24:2014) Optical fibre cables. Generic specification. Basic optical cable test procedures. Electrical test methods GEL/86/1 EN 60904-8:2014 (IEC 60904-8:2014) Photovoltaic devices. Measurement of spectral responsivity of a photovoltaic (PV) device GEL/82 EN 60974-10:2014 (IEC 60974-10:2014) Arc welding equipment. Electromagnetic compatibility (EMC) requirements WEE/6 EN 61000-3-2:2014 (IEC 61000-3-2:2014) Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current 16 A per phase) GEL/210/12 EN 61000-4-5:2014 (IEC 61000-4-5:2014) Electromagnetic compatibility (EMC). Testing and measurement techniques. Surge immunity test GEL/210/12 EN 61000-4-19:2014 (IEC 61000-4-19:2014) Electromagnetic compatibility (EMC). Testing and measurement techniques. Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 khz to 150 khz at a.c. power ports GEL/210/12 EN 61076-2-109:2014 (IEC 61076-2-109:2014) Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for connectors with M 12 x 1 screw-locking, for data transmission frequencies up to 500 MHz EPL/48 EN 61169-45:2014 (IEC 61169-45:2014) Radio-frequency connectors. Sectional specification for series SQMA series quick lock RF coaxial connectors EPL/46 EN 61534-1: (IEC 61534-1:2011/A1:2014) Powertrack systems. General requirements AMENDMENT 1:August 2014 to EN 61534-1:2011 PEL/213 EN 61534-21:2014 (IEC 61534-21:2014) Powertrack systems. Particular requirements for powertrack systems intended for wall and ceiling mounting PEL/213 EN 61534-22:2014 (IEC 61534-22:2014) Powertrack systems. Particular requirements for powertrack systems intended for onfloor or underfloor installation PEL/213 EN 61753-081-2:2014 (IEC 61753-081-2:2014) Fibre optic interconnecting devices and passive components. Performance standard. Nonconnectorized single-mode fibre optic middlescale 1 x N DWDM devices for category C. Controlled environments GEL/86/2 EN 61839:2014 (IEC 61839:2000) Nuclear power plants. Design of control rooms. Functional analysis and assignment NCE/8 EN 61978-1:2014 (IEC 61978-1:2014) Fibre optic interconnecting devices and passive components. Fibre optic passive chromatic dispersion compensators. Generic specification GEL/86/2 EN 62477-1: Safety requirements for power electronic converter systems and equipment. General AMENDMENT 11:August 2014 to EN 62477-1:2012 PEL/22 50 Update Standards October 2014 Prices may be subject to change.

EN 62566:2014 (IEC 62566:2012) Nuclear power plants. Instrumentation and control important to safety. Development of HDL-programmed integrated circuits for systems performing category A functions NCE/8 EN 62676-1: Video surveillance systems for use in security applications. System requirements. General CORRIGENDUM 1:July 2014 to EN 62676-1-1:2014 GW/1/10 EN 62841-3-1:2014 (IEC 62841-3-1:2014) Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for transportable table saws CPL/116 EN 62841-3-6:2014 (IEC 62841-3-6:2014) Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for transportable diamond drills with liquid system CPL/116 HARMONIZATION DOCUMENTS HD 60364-7-753:2014 (IEC 60364-7-753:2014) Low-voltage electrical installations. Requirements for special installations or locations. Heating cables and embedded heating systems JPEL/64 IEC PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following IEC publications are available from BSI Customer Services (see How to order on page 2). IEC Q03-4:2014 Rules of Procedure. IECQ AVIONICS Scheme. Avionics Parts and Assembly Management Available as a free of charge download from the IEC website: http://www.iec.ch/webstore/freepubs/iecq/iecq03-4%7bed3.0%7den.pdf IEC 60034-26: Rotating electrical machines. Effects of unbalanced voltages on the performance of three-phase cage induction motors CORRIGENDUM 1:September 2014 to IEC 60034-26:2006 PEL/2 IEC 60050-113: International Electrotechnical Vocabulary. Physics for electrotechnology AMENDMENT 1:August 2014 to IEC 60050-113:2011 11.70 members, 13.00 non-members GEL/1 IEC 60050-151: International Electrotechnical Vocabulary. Electrical and magnetic devices AMENDMENT 2:August 2014 to IEC 60050-151:2001 11.70 members, 13.00 non-members GEL/1 IEC 60050-161: International Electrotechnical Vocabulary. Electromagnetic compatibility AMENDMENT 4:August 2014 to IEC 60050-161:1990 11.70 members, 13.00 non-members GEL/1 IEC 60050-881: International Electrotechnical Vocabulary. Radiology and radiological physics AMENDMENT 1:August 2014 to IEC 60050-881:1983 11.70 members, 13.00 non-members GEL/1 IEC 60050-881:1983 Advance edition of the International Electrotechnical Vocabulary. Radiology and radiological physics 284.40 members, 316.00 non-members GEL/1 IEC 60050-903: International Electrotechnical Vocabulary. Risk assessment AMENDMENT 1:August 2014 to IEC 60050-903:2013 17.10 members, 19.00 non-members GEL/1 IEC 60068-2-75:2014 Environmental testing. Tests. Test Eh: Hammer tests 174.60 members, 194.00 non-members GEL/104 IEC 60086-4:2014 (Edition 4) Primary batteries. Safety of lithium batteries 192.60 members, 214.00 non-members CPL/35 IEC 60092-350:2014 (Edition 4) Electrical installations in ships. General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications 229.50 members, 255.00 non-members GEL/20/6 IEC 60092-354:2014 Electrical installations in ships. Single- and three-core power cables with extruded solid insulation for rated voltages 6 kv (U m = 7,2 kv) up to 30 kv (U m = 36kV) 73.80 members, 82.00 non-members GEL/20/6 IEC 60127-6:2014 Miniature fuses. Fuse-holders for miniature fuse-links 229.50 members, 255.00 non-members PEL/32 IEC 60335-2-25: Household and similar electrical appliances. Safety. Particular requirements for microwave ovens, including combination microwave ovens AMENDMENT 1:August 2014 to IEC 60335-2-25:2010 18.90 members, 21.00 non-members CPL/61/7 IEC 60335-2-56: Household and similar electrical appliances. Safety. Particular requirements for projectors and similar appliances AMENDMENT 2:August 2014 to IEC 60335-2-56:2002 13.50 members, 15.00 non-members CPL/61/1 IEC 60335-2-101: Household and similar electrical appliances. Safety. Particular requirements for vaporizers AMENDMENT 2:August 2014 to IEC 60335-2-101:2002 13.50 members, 15.00 non-members CPL/61/7 IEC 60601-2-64:2014 Medical electrical equipment. Particular requirements for the basic safety and essential performance of light ion beam medical electrical equipment 229.50 members, 255.00 non-members CH/62/3 Update Standards October 2014 Prices may be subject to change. 51

IEC Publications continued... IEC 60601-2-68:2014 Medical electrical equipment. Particular requirements for the basic safety and essential performance of X-ray-based image-guided radiotherapy equipment for use with electron accelerators, light ion beam therapy equipment and radionuclide beam therapy equipment 257.40 members, 286.00 non-members CH/62/3 IEC 60749-42:2014 Semiconductor devices. Mechanical and climatic test methods. Temperature and humidity storage 27.90 members, 31.00 non-members EPL/47 IEC 60876-1:2014 (Edition 5) Fibre optic interconnecting devices and passive components. Fibre optic spatial switches. Generic specification 174.60 members, 194.00 non-members GEL/86/2 IEC 61158-3-1:2014 specifications. Data-link layer service definition. Type 1 elements 293.40 members, 326.00 non-members IEC 61158-3-2:2014 specifications. Data-link layer service definition. Type 2 elements 211.50 members, 235.00 non-members IEC 61158-3-3:2014 specifications. Data-link layer service definition. Type 3 elements 257.40 members, 286.00 non-members IEC 61158-3-4:2014 specifications. Data-link layer service definition. Type 4 elements 156.60 members, 174.00 non-members IEC 61158-3-12:2014 specifications. Data-link layer service definition. Type 12 elements 211.50 members, 235.00 non-members IEC 61158-3-13:2014 specifications. Data-link layer service definition. Type 13 elements 211.50 members, 235.00 non-members IEC 61158-3-14:2014 specifications. Data-link Layer service definition. Type 14 elements 119.70 members, 133.00 non-members IEC 61158-3-19:2014 specifications. Data-link layer service definition. Type 19 elements 137.70 members, 153.00 non-members IEC 61158-3-20:2014 specifications. Data-link layer service definition. Type 20 elements 156.60 members, 174.00 non-members IEC 61158-3-22:2014 specifications. Data-link layer service definition. Type 22 elements 192.60 members, 214.00 non-members IEC 61158-3-24:2014 specifications. Data-link layer service definition. Type-24 elements 192.60 members, 214.00 non-members IEC 61158-4-1:2014 specifications. Data-link layer protocol specification. Type 1 elements 312.30 members, 347.00 non-members IEC 61158-4-2:2014 specifications. Data-link layer protocol specification. Type 2 elements 312.30 members, 347.00 non-members IEC 61158-4-3:2014 specifications. Data-link layer protocol specification. Type 3 elements 312.30 members, 347.00 non-members IEC 61158-4-4:2014 specifications. Data-link layer protocol specification. Type 4 elements 211.50 members, 235.00 non-members IEC 61158-4-11:2014 specifications. Data-link layer protocol specification. Type 11 elements 312.30 members, 347.00 non-members IEC 61158-4-12:2014 specifications. Data-link layer protocol specification. Type 12 elements 302.40 members, 336.00 non-members IEC 61158-4-13:2014 specifications. Data-link layer protocol specification. Type 13 elements 266.40 members, 296.00 non-members IEC 61158-4-14:2014 specifications. Data-link layer protocol specification. Type 14 elements 174.60 members, 194.00 non-members IEC 61158-4-19:2014 specifications. Data-link layer protocol specification. Type 19 elements 312.30 members, 347.00 non-members IEC 61158-4-20:2014 specifications. Data-link layer protocol specification. Type 20 elements 211.50 members, 235.00 non-members IEC 61158-4-22:2014 specifications. Data-link layer protocol specification. Type 22 elements 257.40 members, 286.00 non-members IEC 61158-4-24:2014 specifications. Data-link layer protocol specification. Type 24 elements 284.40 members, 316.00 non-members 52 Update Standards October 2014 Prices may be subject to change.

NEW Search, view and copy offline for graphical symbols for use on electrical equipment PD 60417 SNAPSHOT:2014 - Graphical symbols for use on equipment Looking for symbols for your equipment? Look no further. PD 60417 SS:2014 gives you the means to search, view and copy symbols for equipment from the IEC 60417 database without the need to take out a costly subscription. This new format will be especially useful for the less frequent user. PD 60417 SS:2014 provides instant off-line access to thousands of symbols as used on many types of electrical and electronic equipment. All symbols include their image and description. Easily search and browse to find the symbols you need. PD 60417 SS:2014 is provided in the popular Adobe PDF format. Read more and buy shop.bsigroup.com/uspd60417 To contact us visit shop.bsigroup.com/uspd60417 or contact Customer Services quoting marketing reference code USpd60417 T +44 845 086 9001 F +44 20 8996 7001 orders@bsigroup.com shop.bsigroup.com/uspd60417 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 845 086 9001. BSI British Standards Institution 2014

IEC Publications continued... IEC 61158-5-2:2014 specifications. Application layer service definition. Type 2 elements 312.30 members, 347.00 non-members IEC 61158-5-3:2014 specifications. Application layer service definition. Type 3 elements 312.30 members, 347.00 non-members IEC 61158-5-4:2014 specifications. Application layer service definition. Type 4 elements 257.40 members, 286.00 non-members IEC 61158-5-5:2014 specifications. Application layer service definition. Type 5 elements 312.30 members, 347.00 non-members IEC 61158-5-9:2014 specifications. Application layer service definition. Type 9 elements 293.40 members, 326.00 non-members IEC 61158-5-10:2014 specifications. Application layer service definition. Type 10 elements 312.30 members, 347.00 non-members IEC 61158-5-12:2014 specifications. Application layer service definition. Type 12 elements 293.40 members, 326.00 non-members IEC 61158-5-13:2014 specifications. Application layer service definition. Type 13 elements 229.50 members, 255.00 non-members IEC 61158-5-14:2014 specifications. Application layer service definition. Type 14 elements 275.40 members, 306.00 non-members IEC 61158-5-19:2014 specifications. Application layer service definition. Type 19 elements 174.60 members, 194.00 non-members IEC 61158-5-20:2014 specifications. Application layer service definition. Type 20 elements 229.50 members, 255.00 non-members IEC 61158-5-22:2014 specifications. Application layer service definition. Type 22 elements 266.40 members, 296.00 non-members IEC 61158-5-23:2014 specifications. Application layer service definition. Type 23 elements 275.40 members, 306.00 non-members IEC 61158-5-24:2014 specifications. Application layer service definition. Type-24 elements 275.40 members, 306.00 non-members IEC 61158-6-2:2014 specifications. Application layer protocol specification. Type 2 elements 312.30 members, 347.00 non-members IEC 61158-6-3:2014 specifications. Application layer protocol specification. Type 3 elements 312.30 members, 347.00 non-members IEC 61158-6-4:2014 specifications. Application layer protocol specification. Type 4 elements 192.60 members, 214.00 non-members IEC 61158-6-5:2014 specifications. Application layer protocol specification. Type 5 elements 284.40 members, 316.00 non-members IEC 61158-6-9:2014 specifications. Application layer protocol specification. Type 9 elements 275.40 members, 306.00 non-members IEC 61158-6-10:2014 specifications. Application layer protocol specification. Type 10 elements 312.30 members, 347.00 non-members IEC 61158-6-12:2014 specifications. Application layer protocol specification. Type 12 elements 302.40 members, 336.00 non-members IEC 61158-6-13:2014 specifications. Application layer protocol specification. Type 13 elements 257.40 members, 286.00 non-members IEC 61158-6-14:2014 specifications. Application layer protocol specification. Type 14 elements 275.40 members, 306.00 non-members IEC 61158-6-19:2014 specifications. Application layer protocol specification. Type 19 elements 137.70 members, 153.00 non-members IEC 61158-6-20:2014 specifications. Application layer protocol specification. Type 20 elements 266.40 members, 296.00 non-members 54 Update Standards October 2014 Prices may be subject to change.

NEW Minimize the likelihood of false alarms with BS 8243:2010+A1:2014 Introducing BS 8243:2010+A1:2014 Installation and configuration of intruder and hold-up alarm systems designed to generate confirmed alarm conditions Code of practice According to the Fire Statistics Monitor, local authority fire and rescue services have attended 223,400 false alarms since 2013. False alarms are not only inconvenient but also expensive to manage, which is why the process of installing or servicing them correctly is so important. When properly implemented, alarms are an effective deterrent for burglars, act as useful warnings and limit damage to premises. That s why we ve recently published BS 8243:2010+A1:2014 which offers recommendations on the installation, maintenance and management of intruder and hold-up alarm systems. The guidance document seeks to: Outline design objectives for intruder alarm systems Provide an effective confirmation facility Minimize the likelihood of false alarms The document also provides guidance on minimizing the incidence of false alarms so you can ensure effective alarm systems management. Buy the standard shop.bsigroup.com/usbs8243 To contact us visit shop.bsigroup.com/usbs8243 or contact Customer Services quoting marketing reference code USbs8243 T +44 845 086 9001 F +44 20 8996 7001 orders@bsigroup.com shop.bsigroup.com/usbs8243 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 845 086 9001. BSI British Standards Institution 2014

IEC Publications continued... IEC 61158-6-22:2014 specifications. Application layer protocol specification. Type 22 elements 275.40 members, 306.00 non-members IEC 61158-6-24:2014 specifications. Application layer protocol specification. Type-24 Elements 293.40 members, 326.00 non-members IEC/TS 61244-1:2014 Determination of long-term radiation ageing in polymers. Techniques for monitoring diffusionlimited oxidation 211.50 members, 235.00 non-members GEL/112 IEC 61347-2-13:2014 Lamp controlgear. Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules 137.70 members, 153.00 non-members CPL/34/3 IEC 61375-2-5:2014 Electronic railway equipment. Train communication network (TCN). Ethernet train backbone 293.40 members, 326.00 non-members GEL/9/-/4 IEC 61439-5:2014 Low-voltage switchgear and controlgear assemblies. Assemblies for power distribution in public networks 192.60 members, 214.00 non-members PEL/17/3 IEC 61747-1-1:2014 Liquid crystal display devices. Generic. Generic specification 156.60 members, 174.00 non-members EPL/47 IEC 61747-1-2:2014 Liquid crystal display devices. Generic. Terminology and letter symbols 137.70 members, 153.00 non-members EPL/47 IEC 61747-10-2:2014 Liquid crystal display devices. Environmental, endurance and mechanical test methods. Environmental and endurance 73.80 members, 82.00 non-members EPL/47 IEC 61753-031-2:2014 Fibre optic interconnecting devices and passive components. Performance standard. Nonconnectorized single-mode 1xN and 2xN nonwavelength-selective branching devices for Category C. Controlled environment 91.80 members, 102.00 non-members GEL/86/2 IEC 61753-031-6:2014 Fibre optic interconnecting devices and passive components Performance standard. Nonconnectorized single-mode 1xN and 2xN nonwavelength-selective branching devices for category O. Uncontrolled environment 91.80 members, 102.00 non-members GEL/86/2 IEC 61753-042-2:2014 Fibre optic interconnecting devices and passive components. Performance standard. Plugpigtail-style and plug-receptacle-style OTDR reflecting devices for category C. Controlled environments 73.80 members, 82.00 non-members GEL/86/2 IEC 61754-7-1:2014 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces. Type MPO connector family. Single fibre row 174.60 members, 194.00 non-members GEL/86/2 IEC 61869-4: Instrument transformers. Additional requirements for combined transformers CORRIGENDUM 1:August 2014 to IEC 61869-4:2013 PEL/38 IEC 61883-6:2014 Consumer audio/video equipment. Digital interface. Audio and music data transmission protocol 284.40 members, 316.00 non-members EPL/100 IEC/TS 61967-3:2014 Integrated circuits. Measurement of electromagnetic emissions. Measurement of radiated emissions. Surface scan method 192.60 members, 214.00 non-members EPL/47 IEC 62026-3:2014 Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs). DeviceNet 293.40 members, 326.00 non-members PEL/17/2 IEC/TS 62132-9:2014 Integrated circuits. Measurement of electromagnetic immunity. Measurement of radiated immunity. Surface scan method 156.60 members, 174.00 non-members EPL/47 IEC 62282-4-101:2014 Fuel cell technologies. Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks 229.50 members, 255.00 non-members GEL/105 IEC 62353:2014 Medical electrical equipment. Recurrent test and test after repair of medical electrical equipment 257.40 members, 286.00 non-members CH/62/1 IEC 62501: Voltage sourced converter (VSC) valves for highvoltage direct current (HVDC) power transmission. Electrical testing AMENDMENT 1:August 2014 to IEC 62501:2009 119.70 members, 133.00 non-members PEL/22 IEC/TS 62607-5-1:2014 Nanomanufacturing. Key control characteristics. Thin-film organic/nano electronic devices. Carrier transport measurements 64.80 members, 72.00 non-members NTI/1 IEC 62656-1:2014 Standardized product ontology register and transfer by spreadsheets. Logical structure for data parcels 312.30 members, 347.00 non-members GEL/3 IEC 62675:2014 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-metal hydride prismatic rechargeable single cells 73.80 members, 82.00 non-members PEL/21/1 IEC 62722-1:2014 Luminaire performance. General requirements 91.80 members, 102.00 non-members CPL/34/4 IEC 62751-1:2014 Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems. General requirements 174.60 members, 194.00 non-members PEL/22 IEC 62751-2:2014 Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems. Modular multilevel converters 229.50 members, 255.00 non-members PEL/22 IEC/TR 62778: Application of IEC 62471 for the assessment of blue light hazard to ligh t sources and luminaires CORRIGENDUM 1:July 2014 to IEC/TR 62778:2014 CPL/34/1 56 Update Standards October 2014 Prices may be subject to change.

IEC 62798:2014 Industrial electroheating equipment. Test methods for infrared emitters 211.50 members, 235.00 non-members PEL/27 IEC 62817:2014 Photovoltaic systems. Design qualification of solar trackers 257.40 members, 286.00 non-members GEL/82 IEC 62826:2014 Surface cleaning appliances. Floor treatment machines with or without traction drive, for commercial use. Methods of measuring the performance 137.70 members, 153.00 non-members CPL/59/6 IEC 62841-3-9:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for transportable mitre saws 174.60 members, 194.00 non-members CPL/116 IEC 80601-2-58:2014 Medical electrical equipment. Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery 156.60 members, 174.00 non-members CH/62/4 IEC/PAS PUBLICATIONS IEC/PAS 61182-12:2014 Generic requirements for printed board assembly products manufacturing description data and transfer methodology 312.30 members, 347.00 non-members EPL/501 IEC/PAS 80005-3:2014 Utility connections in port. Low Voltage Shore Connection (LVSC) Systems. General requirements 229.50 members, 255.00 non-members JPEL/18 ISO PUBLICATIONS It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested. The following ISO publications are available from BSI Customer Services (see How to order on page 2). ISO 105-B01:2014 (Edition 6) Textiles. Tests for colour fastness. Colour fastness to light: Daylight 48.87 members, 54.30 non-members TCI/81 Will be implemented as an identical British Standard ISO 105-B02:2014 (Edition 6) Textiles. Tests for colour fastness. Colour fastness to artificial light: Xenon arc fading lamp test 85.52 members, 95.02 non-members TCI/81 Will be implemented as an identical British Standard ISO 2538-1:2014 Geometrical product specifications (GPS). Wedges. Series of angles and slopes 35.42 members, 39.36 non-members TDW/4 Will be implemented as an identical British Standard ISO 2538-2:2014 Geometrical product specifications (GPS). Wedges. Dimensioning and tolerancing 45.20 members, 50.22 non-members TDW/4 Will be implemented as an identical British Standard ISO 4074:2014 Natural rubber latex male condoms. Requirements and test methods 98.96 members, 109.95 non-members CH/157 Will be implemented as an identical British Standard ISO 7240-28:2014 Fire detection and alarm systems. Fire protection control equipment 74.52 members, 82.80 non-members FSH/12/3 Will be implemented as an identical British Standard ISO/IEC 7811-6:2014 (Edition 4) Identification cards. Recording technique. Magnetic stripe. High coercivity 65.97 members, 73.30 non-members IST/17 Will be implemented as an identical British Standard ISO/IEC 7811-7:2014 Identification cards. Recording technique. Magnetic stripe. High coercivity, high density 70.86 members, 78.73 non-members IST/17 Will be implemented as an identical British Standard ISO/IEC 7816-4: Identification cards. Integrated circuit cards. Organization, security and commands for interchange CORRIGENDUM 1:August 2014 to ISO/IEC 7816-4:2013 IST/17 Will be implemented as an identical British Standard ISO 8124-2:2014 Safety of toys. Flammability 59.86 members, 66.51 non-members CW/15 Will not be implemented as a British Standard ISO 8124-6:2014 Safety of toys. Certain phthalate esters in toys and children s products 74.52 members, 82.80 non-members CW/15 Will not be implemented as a British Standard ISO 9453:2014 Soft solder alloys. Chemical compositions and forms 52.53 members, 58.37 non-members NFE/27/4 Will be implemented as an identical British Standard ISO/IEC 9834-8:2014 Information technology. Procedures for the operation of object identifier registration authorities. Generation of universally unique identifiers (UUIDs) and their use in object identifiers 65.97 members, 73.30 non-members IST/6 Will not be implemented as a British Standard ISO 10081-4:2014 Classification of dense shaped refractory products. Special products 45.20 members, 50.22 non-members RPI/1 Will be implemented as an identical British Standard ISO 11092:2014 Textiles. Physiological effects. Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guardedhotplate test) 52.53 members, 58.37 non-members TCI/24 Will be implemented as an identical British Standard ISO 11119-2: Gas cylinders. Refillable composite gas cylinders and tubes. Design, construction and testing. Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with loadsharing metal liners AMENDMENT 1:August 2014 to ISO 11119-2:2012 9.77 members, 10.86 non-members PVE/3/3 Will not be implemented as a British Standard Update Standards October 2014 Prices may be subject to change. 57

ISO Publications continued... ISO 11979-9: Ophthalmic implants. Intraocular lenses. Multifocal intraocular lenses AMENDMENT 1:August 2014 to ISO 11979-9:2006 9.77 members, 10.86 non-members CH/172/7 Will be implemented as an identical British Standard ISO/TR 12468-3:2014 External exposure of roofs to fire. Commentary 35.42 members, 39.36 non-members FSH/22/-/8 Will not be implemented as a British Standard ISO/IEC 13157-1:2014 Information technology. Telecommunications and information exchange between systems. NFC Security. NFC-SEC NFCIP-1 security services and protocol 48.87 members, 54.30 non-members IST/6 Will not be implemented as a British Standard ISO/IEC 14496-10:2014 Information technology. Coding of audio-visual objects. Advanced Video Coding 145.38 members, 161.53 non-members IST/37 Will be implemented as an identical British Standard ISO 14708-1:2014 Implants for surgery. Active implantable medical devices. General requirements for safety, marking and for information to be provided by the manufacturer 98.96 members, 109.95 non-members CH/150/2 Will not be implemented as a British Standard ISO 16000-30:2014 Indoor air. Sensory testing of indoor air 78.18 members, 86.87 non-members EH/2/5 Will not be implemented as a British Standard ISO/TS 16530-2:2014 Well integrity. Well integrity for the operational phase 119.73 members, 133.03 non-members PSE/17/-/4 Will not be implemented as a British Standard ISO 17123-1:2014 Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Theory 85.52 members, 95.02 non-members CPW/172 Will not be implemented as a British Standard ISO 17296-3:2014 Additive manufacturing. General principles. Main characteristics and corresponding test methods 48.87 members, 54.30 non-members AMT/8 Will be implemented as an identical British Standard ISO 17296-4:2014 Additive manufacturing. General principles. Overview of data processing 35.42 members, 39.36 non-members AMT/8 Will be implemented as an identical British Standard ISO/TS 17929:2014 Biomechanical effects on amusement ride passengers 70.86 members, 78.73 non-members MCE/3/4 Will be implemented as an identical British Standard ISO/IEC 19369:2014 Information technology. Telecommunications and information exchange between systems. NFCIP-2 test methods 26.87 members, 29.86 non-members IST/6 Will not be implemented as a British Standard ISO/IEC 19788-1: Information technology. Learning, education and training. Metadata for learning resources. Framework AMENDMENT 1:September 2014 to ISO/IEC 19788-1:2011 9.77 members, 10.86 non-members IST/43 Will be implemented as an identical British Standard ISO/IEC 19794-2: Information technology. Biometric data interchange formats. Finger minutiae data CORRIGENDUM 2:September 2014 to ISO/IEC 19794-2:2005/A1:2010 IST/44 Will be implemented as an identical British Standard ISO/TS 20245:2014 Cross-border trade of second-hand goods 35.42 members, 39.36 non-members SVS/0 Will not be implemented as a British Standard ISO 20283-4: Mechanical vibration. Measurement of vibration on ships. Measurement and evaluation of vibration of the ship propulsion machinery AMENDMENT 1:September 2014 to ISO 20283-4:2012 9.77 members, 10.86 non-members GME/21/3 Will be implemented as an identical British Standard ISO 22004:2014 Food safety management systems. Guidance on the application of ISO 22000 81.86 members, 90.95 non-members AW/90 Will be implemented as an identical British Standard ISO/IEC 23000-10: Information technology. Multimedia application format (MPEG-A). Surveillance application format AMENDMENT 1:August 2014 to ISO/IEC 23000-10:2012 9.77 members, 10.86 non-members IST/37 Will not be implemented as a British Standard ISO 24504:2014 Ergonomics. Accessible design. Sound pressure levels of spoken announcements for products and public address systems 65.97 members, 73.30 non-members PH/9/-/1 Will not be implemented as a British Standard ISO/IEC 24771:2014 Information technology. Telecommunications and information exchange between systems. MAC/PHY standard for ad hoc wireless network to support QoS in an industrial work environment 145.38 members, 161.53 non-members IST/6 Will be implemented as an identical British Standard ISO/IEC 26300: Information technology. Open Document Format for Office Applications (OpenDocument) v1.0 CORRIGENDUM 3:August 2014 to ISO/IEC 26300:2006 IST/41 Will be implemented as an identical British Standard ISO/IEC 26300: Information technology. Open Document Format for Office Applications (OpenDocument) v1.0 CORRIGENDUM 1:August 2014 to ISO/IEC 26300:2006/A1:2012 IST/41 Will be implemented as an identical British Standard ISO/IEC 29167-1:2014 Information technology. Automatic identification and data capture techniques. Security services for RFID air interfaces 40.31 members, 44.79 non-members IST/34 Will be implemented as an identical British Standard 58 Update Standards October 2014 Prices may be subject to change.

You can buy USA s NFPA standards and codes from us The USA s National Fire Protection Association (NFPA) is a leader in fire, electrical and building safety. You can now buy NFPA 70 : National Electrical Code (NEC ) Looseleaf, 2014 Edition from us today. The 2014 NEC covers the latest requirements on electrical wiring and equipment installation issues, including minimum provisions for the use of connections, voltage markings, conductors, and cables. Chapters address specific circumstances surrounding special occupancies and industrial equipment and machines. It also contains specific details on the safe installation and use of communications and signalling conductors. The NEC Looseleaf lets you insert all the extra technical information and other data you need on an electrical project within relevant sections of the 2014 NEC. Price: 88 BSI Members will receive a 10% discount Shipping and handling fees apply Delivery time within UK 7-10 days To buy and find out more please email worldwide.standards@bsigroup.com Free help from our Knowledge Centre Let us take the hassle out of your standards and subject searches. We employ a team of information professionals, just for Members. They re dedicated to answering your questions on BSI standards and helping you with your standards-related queries. They will: Provide scope and content information on any standard Find standards through subject searches Give you expanded information on what a standard covers through keyword searches You can view full standards online or in printed format in our Members Reading Room in London. Our information and searches cover current and withdrawn British Standards as well as standards from over 200 standards organizations in 23 countries. Contact the Knowledge Centre today to find out how we can help you with your standards searches. This service is available exclusively for BSI Members. Tel +44 20 8996 7004 Fax +44 20 8996 7005 Email knowledgecentre@bsigroup.com bsigroup.com/knowledgecentre

NEW Introducing BS ISO/IEC 27018:2014 Information technology Security techniques Code of practice for protection of personally identifiable information (PII) in public clouds acting as PII processors. In response to one of the key goals announced in the 2012 European Cloud Computing Strategy, the adoption of cloud computing in all sectors of the economy is being promoted in order to boost productivity. However concerns over privacy and security have acted as a barrier to migrating data to the cloud. That s why we ve published BS ISO/IEC 27018 Information technology Security techniques Code of practice for protection of PII in public clouds acting as PII processors. This international standard augments the BS ISO/IEC 27001 Information security management system standard. It establishes commonly accepted control objectives, controls and guidelines for implementing measures to protect PII in accordance with the privacy principles in ISO/IEC 29100 for the public cloud computing environment. The guidance document seeks to: Allow public cloud service providers to comply with applicable obligations Enable transparency in relevant matters so that cloud service customers can select well-governed cloud-based PII processing services Assist all parties when entering into a contractual agreement Provide a mechanism for exercising audit and compliance rights where individual audits may themselves increase risks to network security controls in place The standard is a welcome step towards ensuring compliance with the principles in the Data Protection Act and boosting customer confidence in cloud computing technologies. Read more and buy shop.bsigroup.com/us27018 To contact us visit shop.bsigroup.com/us27018 or contact Customer Services quoting marketing reference code US27018 T +44 845 086 9001 F +44 20 8996 7001 orders@bsigroup.com shop.bsigroup.com/us27018 Standards and publications may also be ordered via the BSI shop at shop.bsigroup.com *P&P 5.95 UK (inclusive of VAT); 9.95 Rest of the World (+VAT if applicable) one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-members. VAT is applicable to all purchases of PDF downloads, CDs, DVDs, other electronic products and Conferences and Training Courses. All prices, content and publishing dates may be subject to change. For details of BSI Membership, call +44 845 086 9001. BSI British Standards Institution 2014