NEW!! New for 2011/12!! Oil Burner Motors Pg.8. Direct Drive Blowers!! Pg.12,13,14. NEW OEM Replacement Motors!!

New for 011/1!! New Oil Burner Motors Pg.8 NEW!! New Direct Drive Blowers!! Pg.1,13,1 NEW OEM Replacement Motors!! Part # OEM Name Page # FB-RFB1 Armstrong - JA1N111, 155-001 15 FB-RFB19 Bradford White - Fasco A19, 701-771, AO Smith 958 1 FB-RFB580 Consolidated Industries - JAIN107, 90950, 100 17 FB-RFB31 Consolidated Industries - JAIN118, 30590, 31101 17 FB-RFB570 Consolidated Industries - UE JA1P08, 01570 17 FB-RFB57 Consolidated Industries - UE JA1P090, 0150 17 FB-RFB7 Heil Quaker - A0, 107, X89-55 0 FB-RFB571 ICP - 701-1008, 701-10580, A19, 1085571, 1110008 0 FB-RFB95 Lennox - W95, 31L5501 FB-RFB98 Lennox - G Mid Eff. 11K98 Kit FB-RFB99 Lennox - G Mid Eff. 11K99 Kit FB-RFB15 Trane - 51-150-01 7 FB-RFB150 Trane - A150, 701-7833 7 FB-RFB58 Williamson Furnace - A080, 701-5510, 0-58, S88-81 9 FB-RFB118 Williamson Furnace - A118, 701-999, 701-70, X89-50 9 Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End)

5.5" Direct Drive Features 8 Frame 5.5" Diameter Open Enclosure Mounting: Stud, Strap & Base (Resilient Rings) 0 Hz Sleeve Bearing Shaft: 1/".0" Reversible Permanent Split Capacitor (P.S.C.) 0" Coloured Electrical Leads Insulation Class B Thermally Protected + DD-131 llustrated Month Warranty 8 Frame - Speed - Multi-HP - Direct Drive Part # HP Volts Amps Cap. SPD/RPM Rotation A Dim. Bearing Shaft DD-131 1/3 115.0 7.5/370 /1075 Revers..0" Sleeve 1/" " Capacitor Not Included Cross Reference Rotom HP Voltage AO Smith Carrier Coleman Emerson Lennox ICP GE Marathon Rotom DD-131 1/3 1/ 1/ 1/7 115 DL10 DL103 HC1SE117 HC1SE11 P57 8583 P57 8585 18-3P 118 183 18 P-8-7505 33 LFM13 100905 100815 3583 3585 X003 R3583 R3585 Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End) 3

Direct Drive 5.5" Direct Drive Replacement Motors Features Less Inventory Required! Versatile! Time Saver! Easy Installations! Energy Efficient Different Capacitor/Speed Combos Designed for 370V Cap Reversible Rotation Resilient Rings Extended Thru Bolts Automatic Protector Class B Insulation Supplied Free In 8 Frame Every Box Single Phase Continuous Duty-Over Air All-Purpose Capacitor Multi-Rating Capacitor Mounts by Belly Band, Thru Bolts 5, 7.5, 10, 1.5 & 15 MFD or Shell Holes Rheem Mounting Holes in Shell 0 Hz Part # HP Spd. RPM Volt Amps Capacitor (370V) Bearing Leads Dia Shaft 1/ All 7.0 10 mfd 1/3 All.7 R-R300 1/ Lo, Med-Lo, Med-Hi 1075 115. Sleeve ".8" 1/" 5" 5 mfd 7.5* 1/5 Low, Med-Lo 3. 1/ Lo. 1/ All 3.9 10 mfd 1/3 All 3. R-R301 1/ Lo, Med-Lo, Med-Hi 1075 08-30.5 Sleeve ".8" 1/" 5" 5 mfd 7.5* 1/5 Lo, Med-Lo 1.8 1/ Lo 1.3 3/ All 9.1 1/ All.8 10 mfd R-R30 1/3 All 1075 115 5.5 Ball 38".8" 1/" 5 1/" 1/ Lo, Med-Lo, Med-Hi 3.0 5 mfd 7.5* 1/5 Lo, Med-Lo.3 3/ All 3.9 1/ All 3. 10 mfd R-R303 1/3 All 1075 08-30 3.0 Ball 38".8" 1/" 5 1/" 1/ Lo, Med-Lo, Med-Hi.3 5 mfd 7.5* 1/5 Lo, Med-Lo.0 * Motor is approximately 10% stronger and has higher starting torque for 1/, 1/5, 1/ and 1/3 HP rating with the 7.5 mfd 370VAC capacitor. Cross Reference Open Drip Proof 0 C Ambient Rotom Emerson Genteq Fasco Marathon A.O. Smith R-R300 50 33 D835 X077 FDL001A R-R301 51 3 D833 X073 FD000A R-R30 70 3 D83 X07 FDL00A R-R303 71 37 D833 X075 FD001A Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End)

Direct Drive Motors Direct Drive Motors Features 8Y Frame 5.5" Diameter Open Enclosure Mounting: Stud, Strap & Base (Resilient Rings) 0 Hz Sleeve Bearing Shaft:.0" 1/" Reversible Permanent Split Capacitor (P.S.C.) 0" Coloured Electrical Leads (except where noted) 5 C Ambient (except where noted) Insulation Class B Thermally Protected 5 C Ambient Month Warranty + 9-A817 Torsion Flex Bracket 5.0" & 5.5" Dia. 9" & 10" Bolt Circles 9-A8550-5" Diameter 9-A8555-5.5" Diameter 9" & 10" Bolt Circles 115 & 08/30 Volt, 3 Speed, 1075 RPM, Reversible Rotation Cross Reference Rotom HP Voltage AO Smith Diversitech Emerson Fasco Embraco GE Marathon UE Rotom DD-3583 1/ 115 DL10 WG80583 183 D71 E01 3583 X000 533 R3583 DD-358 1/ 08/30 D10 WG8058 1971 D75 E0 358 X001 530 R358 DD-3585 1/3 115 DL103 WG80585 18 D77 E03 3585 X00 53 R3585 DD-358 1/3 08/30 D103 WG8058 197 D93 E0 358 X003 59 R358 DD-3587 1/ 115 DL105 WG80587 185 D701 E05 3587 X00 531 R3587 DD-3588 1/ 08/30 D105 WG80588 1973 D703 E0 3588 X005 58 R3588 DD-3589 3/ 115 DL107 WG80589 890 D78 E07 3589 X009 78 R3589 DD-3590 3/ 08/30 D107 WG80590 8905 D79 E08 3590 X010 79 R3590 Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End) 5.5" Diameter for 1/ HP and above 9-A855-9" Bolt Circle 9-A8557-10" Bolt Circle HEAVY DUTY Part # HP Volts Amps Cap. SPD/RPM Rotation Body Bearing Shaft DD-3583 1/ 115.8 5/370 3/1075 Revers.." Sleeve 1/".0" DD-358 1/ 08/30. 5/370 3/1075 Revers.." Sleeve 1/".0" DD-3585* 1/3 115 5.5 7.5/370 3/1075 Revers..37" Sleeve 1/".0" DD-358 1/3 08/30.9 5/370 3/1075 Revers..8" Sleeve 1/".0" DD-3587* 1/ 115 7.5 10/370 3/1075 Revers. 5.5" Sleeve 1/".0" DD-3588 1/ 08/30 5.0 5/370 3/1075 Revers. 5.3" Sleeve 1/".0" DD-3589 3/ 115 11.3 15/370 3/1075 Revers. 5.8" Sleeve 1/".0" DD-3590* 3/ 08/30 5.5 10/370 3/1075 Revers. 5.37" Sleeve 1/".0" *Note: " leads & 0 C Amb. Capacitor Not Included 5

5.5" Unit Heater Motors Features 8 Frame 5.5" Diameter Totally Enclosed Mounting: Stud Pattern 0 Hz Ball Bearing Shaft: 1/" 3." Reversible Permanent Split Capacitor (P.S.C.) 0 C Ambient Insulation Class B Thermally Protected Month Warranty + Optional Base UH-UHK Optional Mounting Base For UH- Series Unit Heaters. Includes Base, Brackets & Resilient Rings. Unit Heater Part # HP Volts Amps Cap. RPM Rotation A Dim. Bearing Shaft UH-903 1/ 115. 5/370 1/1075 Revers..5" Ball 1/" 3." UH-9035 1/ 115.1 5/370 1/1075 Revers..5" Ball 1/" 3." UH-903 1/3 115 5.0 7.5/370 1/1075 Revers..5" Ball 1/" 3." Capacitor Included Cross Reference Rotom AO Smith Emerson Fasco GE Marathon UE UH-903 UH101, US101, US101NB 903 D83 30 X30, X30 177, 79 UH-9035 UH10, US10, US10NB 9035 D73 308 X303, X307 5, 73, 750 UH-903 UH103, US103, US103NB 903 D73 31 X30, X308 183, 751 Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End)

Belted Fan Motors Features 8 Frame 5.5" Diameter Open Drip Proof Resilient Ring & Base Included 0 Hz Sleeve Bearing Shaft: 1/" 1.5" W/ Flat Reversible Split Phase 5 C (113 F) Ambient Insulation Class B Thermally Protected Month Warranty A + BF-701 Belted Fan - One Speed Part # HP Volts Amps S.F. RPM Rotation A Dim. Bearing Shaft BF-701 1/ 115 5.8 1.35 1/175 Revers..5" Sleeve 1/" 1.5" BF-70 1/3 115 7.3 1.35 1/175 Revers..5" Sleeve 1/" 1.5" BF-708 1/ 115 9.9 1.5 1/175 Revers..75" Sleeve 1/" 1.5" Cross Reference Rotom AO Smith Emerson Fasco GE Marathon UE Rotom BF-701 GF0 80CV D00 701, H701 D17, B0, B303 - R80 BF-70 GF03 81CV - 70, H711 D13, B07 - R81 BF-707 GF03B 888 D00 8, H15 B305, B703 90, 91,9 R888 BF-708 GF05 15C - 708 D1, B08 - R15 BF-709-887 D00 8, H703 B307 - R887 Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End) 7

Split Phase, 0Hz, Shaded Pole Part # HP Volts Amps Service Factor NEW!! Oil Burner Motors Features 8M and 8N Flange Mounting Open & Totally Enclosed External reversing Switch (most models) Sleeve Bearing Manual Reset Overload SPD/RPM Rotation Body Frame Bearing Shaft Comment T-R1 1/8 115.5 1.0 1/175 Rev. 5." 8N Sleeve 1.8" 1/" 11" Leads T-R10 1/8 115.5 1.0 1/175 Rev. 5." 8N Sleeve 1.8" 1/" 0" Leads T-R78 1/8 115.5 1.0 1/175 Rev. 5." 8N Sleeve 1.8" 1/" T-R097 1/8 115.8 1.0 1/350 Rev. 5.93" 8N Sleeve 1.88" 1/" 0" Leads, open shaft end bracket, rotation switch. 0" Leads, open shaft end bracket, rotation switch. T-R3083 1/7 115.5 1.0 1/350 Rev. 5.7" 8M Sleeve 1.8" 1/" 15" Leads, rotation switch. T-R58 1/7 115.5 1.0 1/350 CCW 5.7" 8M Sleeve 1.8" 1/" T-R30 1/7 115.9 1.0 1/350 CW 5.97" 8M Sleeve 1.8" 1/" 15" Leads, open shaft end bracket Beckett 1805U, 10.5" Leads, open shaft end bracket T-R350 1/ 115 3. 1.0 1/175 Rev. 5.7" 8N Sleeve 1.8" 1/" 0" Leads T-R35 1/ 115 3. 1.0 1/175 Rev. 5.7" 8N Sleeve 1.8" 1/" 0" Leads, open shaft end bracket, rotation switch. T-R351 1/ 115.7 1.0 1/350 Rev. 5.97" 8M Sleeve 1.8" 1/" 0" Leads, rotation switch. T-R3579 1/ 115 3.7 1.0 1/175 Rev..7" 8N Sleeve 1.8" 1/" 0" Leads, rotation switch. T-R30 1/ 115 3. 1.0 1/350 Rev..7" 8N Sleeve 1.8" 1/" T-r33 1/3 115.3 1.0 1/175 Rev..7" 8N Sleeve 1.8" 1/" 0" Leads, open shaft end bracket. 0" Leads, open shaft end bracket. T-R303 1/3 115.3 1.0 1/175 Rev. 9." 8N Sleeve 1.88" 1/" Terminal board T-R38 1/3 115/30./.1 1.0 1/350 Rev..7" 8N Sleeve 1.8" 1/" T-R788 1/3 115/30 5./1. 1.35 1/350 Rev. 9.91" 8N Sleeve 1.88" 1/" T-R37 1/ 115/30./3.1 1.0 1/350 Rev..7" 8N Sleeve 1.8" 1/" T-R3105 1/ 115/30 7.3/3.7 1.5 1/350 Rev. 10.1" 8N Sleeve 1.88" 1/" T-R317 3/ 1.5" Leads, open shaft end bracket. Cap start, open shaft end bracket, terminal board 1.5" Leads, 50/0Hz, open shaft end bracket. Cap start, terminal board, open dripproof Cap start, terminal board, 115/ 08-30 10.0/5.0 1.0 1/350 Rev. 8.75" 8CZ Ball.0" 5/8" open constr. 5/8" keyed shaft PSC Oil Burner Motor - Direct Beckett Replacement - 1805U NEW!! PSC, 0Hz Part # HP Volts Amps Service Factor SPD/RPM Rotation Body Frame Bearing Shaft Comment T-R1805U 1/7 115 1.8 1.0 1/350 CW.59 8M Ball 1.8" 1/" PSC, open dripproof, automatic protector 8 Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End)

Circulator & Booster Pump Motors Armstrong / B&G Direct Replacement Single Shaft Single Speed 175 RPM 115/30/0/575 Volts Resilient Rings for Base Mount Models Open Construction Reversible Typical Applications : Hot Water Boiler & Booster Pumps Fig. 1 Fig. Fig. 3 Fig. Fig. 5 Fig. CP-R1350 Part # HP Volts Fig. Bearing Cross Reference CP-R1350 1/1 115 1 Ball 80531-010, 831000-1, 11103 CP-R1311 1/1 115 Sleeve NEW! Taco Replacement CP-R130 1/8 115 3 Sleeve NEW! CCW, 5KH3EG19GA, 8S17D108 CP-R1310 1/8 115 Sleeve OBG00 CP-R1351 1/ 115 1 Ball 81705-005, 11101 CP-R135 1/ 115 5 Ball 81705-001, 831001-01, 111031 CP-R135 115 5 Ball 81705-007, 83100-01, 11100 1/ CP-R1 115 Ball 8111-001 CP-R135 115 5 Ball 81705-013, 831003-01, 1110 1/3 CP-R1 115 Ball 8111-00 CP-R1359 115/30 7 Ball 831009-01, 1110 CP-R138 30/0 8 Ball 811757-003, 00, 03, 831011-083, 1110 1/ CP-R139 575 8 Ball 811757-00, 1110-5 CP-R159 115/30 9 Ball 811757-001, 1110 CP-R13 115/30 7 Ball 831010-0, 11107 CP-R1370 30/0 8 Ball 83101-083, 11109 CP-R137 575 8 Ball 811757-00, 11109-5 3/ CP-R1 115/30 9 Ball 811757-00, 033, 11107 CP-R170 30/0 10 Ball 811575-005, 11109 CP-R17 575 10 Ball 811757-005, 0, 07, 11109-5 CP-R133 115/30 7 Ball 817-0, 111050 CP-R1371 30/0 8 Ball 8175-09, 19090 CP-R1373 575 8 Ball 817-08, 19090-5 1 CP-R13 115/30 9 Ball 811757-007, 08, 031, 111050 CP-R171 30/0 10 Ball 811757-008, 19090 CP-R173 575 10 Ball 811757-009, 08, 031, 19090-5 CP-R135 115/30 7 Ball 8178-0, 19095 CP-R137 1 1/ 30/0 8 Ball 8178-09, 1909 CP-R1375 575 8 Ball 8185-08, 1909-5 Pump Couplers Easy Links - Spirolink T-10010 CP-R1311 CP-R130 T-1003 CP-R1310 Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End) CP-R135 Fig. 7 Fig. 8 Fig.9 Fig. 10 CP-R1 CP-R1373 CP-R1359 CP-R13 CP-R171 Part# Specification Description T-10010 1/" 1/" 1/ to 1/3 HP Easy Link T-10010SL 1/" 1/" Spirolink T-1003 1/" 1/" or 1/" 5/8" 1/ to 3/ HP Easy Link T-1003SL 1/" 1/" or 1/" 5/8" Spirolink T-1003SL 1/" 5/8" or 5/8" 5/8" Spirolink T-1005SL 1/" 5/8" or 5/8" 5/8" Taco 9

Flue Exhaust Motors Fig. 1 Fig. Fig. 3 Fig. Fig. 5 Fig. Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Part # HP Spd/RPM Amps Volts Rot Shaft Body Type Mntg Comment Fig FM-RFM50 1/00 1/3000 0.5 08/30 C.C.W. 0.8"x1/".90 S.P. LEG Keeprite 50015K 1 FM-RFM1 1/0 1/300 0.37 0 C.C.W..5"x1/" 5.80 S.P. STUD York 0-115-019B 5" leads FM-RFM 1/35 1/3000 1.30 115/30 C.C.W. 3.9"x5/1".90 S.P. STUD Franklin 80137, Fasco D0, D08 3 FM-RFM10 1/35 1/3000 1.30 115/30 C.W. 3.9"x5/1".90 S.P. STUD E.J. Walsh 81191017, Fedders, w/ centrifugal switch 3 FM-RFM1198 1/30 1/300 1.50 115 C.W..3"x5/1" 3.0 S.P. LUGS Lennox 5J101 FM-RFM890 1/5 1/300 0.70 08/30 CCW.3"x5/1" 3.9 S.P. STUD Lennox 98G8901, 711-7091 5 FM-RFM5 1/0 1/3000 1.80 115/30 C.C.W..3"x1/" 5.30 S.P. STUD Fedders S190007003, U.E. 570 FM-RFM 1/0 1/3000 1.80 115/30 C.W..3"x1/" 5.30 S.P. STUD Carrier HCAU700, U.E. 571 FM-RFM580* 1/0 1/3300 1.90 115 C.C.W. 1.9"x5/1" 3.50 S.P. LUGS HC7VE10, Univ. JAP053N, Bryant P51-307, U.E. 580 7 FM-RFM11* 1/0 1/300 1.80 115 C.C.W. 1.5"x5/1" 3.0 S.P. 3 LUGS Clare Bros. M05 8 Carrier, York, Keeprite U53 FM-RFM53 1/0 1/330 1.00 30/0 C.W..1"x1/" 5.90 S.P. STUD Fasco 7131-050, 5/1 Bushing FM-RFM 1/1 1/350 0.30 0 C.W. 3.3"x5/1".80 PSC/ INC STUD ICP 117137 Carrier HC30GB0 9 FM-RFM80 1/1 1/350 1.00 115/08 /30 York 0-115-001, 701, REV. PLUG 1."x1/" 7.00 PSC/ INC STUD Carrier HC80001B, w/switch Carrier, York, U0 w/ Cent. Switch 5/1 Bushing M0 - Clare High Efficiency * Note: Without Centrifugal Switch FM-RFM3 1/1 1/300 1.0 30/0 C.C.W..3"x1/".0 S.P. STUD FM-RFM1* 1/15 1/3000.00 115 C.C.W. 1.3"x5/1".0 S.P. 3 LUGS 10 11 10 Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End)

Flue Exhaust Motors Fig. 1 FM-RFM30 Fig. FM-RFM9 Fig. 3 FM-RFM3 Fig. FM-RFM10 Fig. 5 FM-RFM187 Fig. FM-RFM0 Fig. 7 FM-RFM78 Part # HP Spd/RPM Amps Volts Rot Shaft Body Type Mntg Comment FM-RFM30 1/1 1/300 0.0 30 REV.PLUG.5"x1/" 7.00 PSC/INC Stud 0-115-00, 71 FM-RFM9 1/1 1/3000 1.10 08/30 CCW.8"x5/1".30 SP Stud Keeprite 50193, FM-RFM3 1/10 1/350 0.55 08/30 CW.9"x5/1" 5.00 PSC/INC Stud ICP 117138, JF1H09N Carrier HC30GB3 FM-RFM10 1/10 1/3000 1.50 115/30 REV. 3.7"x1/" 7.10 PSC/INC Lugs Fasco D10, D1, Reznor FM-RFM187 1/10 1/300 0.30 0 CW 8.8"x3/8".80 PSC/INC Stud York 0-500-5005, 0-500-570, D1187 FM-RFM0 1/10 1/300 0.30 0 REV..5"x1/" 7.00 PSC/INC Stud YVFM50, Fasco D1171 York 0-115-700 FM-RFM78 1/9 1/300 1.30 115/30 REV. 3.3"x5/1".10 PSC/INC Stud RFM7&8, Reznor 38-115V, 3-08/30V * Note: Without Centrifugal Switch Cooling Fan Kits Part # Rotation Kits Description 9-FMK CW 1 3/" Diameter. 5/1" Hub I.D. with 1/" adapter. 9-FMK1 CCW () Spacers, () 10/3 & () 8/3 nuts. 9-FMK1 Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End) 11

Direct Drive Blowers Fig.1 Fig. Fig.3 Fig. Fig.5 Fig. Fig.7 Fig.8 Fig.9 Fig.10 Fig.11 Fig.11 Part # CFM Spd/RPM Volts Amps Rot. Type Const. Bearing Comment Fig R7-RB0 50 1/3080 115 0.5 CW PSC Open Ball Grainger 1TDN7, C0 1 R7-RB55 55 1/1550 115 0.5 CCW SP Open Sleeve NEW! AO Smith 1 R7-RB3 0 1/3000 115 0.0 CCW SP T.E. Sleeve NEW! AO Smith 9 3 R7-RB 0 1/3000 08/0 0.30 CCW SP Open Sleeve NEW! AO SMITH 93, FASCO 5077-D30, GRAINGER C01 R7-RB1 0 1/3000 115 0.50 CCW SP Open Sleeve NEW! AO SMITH 91, FASCO 5077-D500 R7-RB0 0 1/300 115 0.80 CW SP Open Sleeve NEW! AO SMITH 970, FASCO 5077-D01 3 R7-RB5 5 1/300 115 0.80 CCW SP Open Sleeve NEW! AO SMITH 9, FASCO 5078-D500, GRAINGER C3 R7-RB70 70 1/3000 115 0.50 CCW SP Open Sleeve NEW! AO Smith 989 R7-RB 71 1/30 115 0.3 CW PSC T.E. Ball Franklin 701, 800, Electrohome EB 7 R7-RB75 75 1/3000 115 0.55 CW SP Open Sleeve Electrohome 899-010-001, EB75 8 R7-RB3 75 1/30 115 0.3 CW PSC Open Ball Fasco B0 9 R7-RB885 85 /800 115 0.5 CW SP Open Sleeve NEW! AO SMITH 1 10 R7-RB90 90 1/3000 115 1.00 CW SP Open Sleeve NEW! AO SMITH 13 11 R7-RB991 90 1/3000 115 1.00 CW SP Open Sleeve NEW! AO SMITH 383 1 5 1 Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End)

Direct Drive Blowers Fig.1 Fig. Fig.3 Fig. Fig.5 Fig. Fig.7 Fig.8 Fig.9 Fig.10 Fig.11 Fig.1 Part # CFM Spd/RPM Volts Amps Rot. Type Const. Bearing Comment Fig R7-RB 100 1/1550 115 0.7 CW SP T.E. Sleeve Franklin 700, 80978, Electrohome EB 1 R7-RB33 100 1/300 115 0.88 CW SP Open Sleeve Newmac 0001 EB3 w/ Variable Spd Switch R7-RB5 100 1/350 115 0.3 CW PSC T.E. Ball Easy Radiant 3 R7-RB10 10 1/3100 115 0.80 CW SP Open Sleeve NEW! AO Smith 95 R7-RB135 135 1/00 115 1.30 CCW SP Open Sleeve NEW! AO Smith 98, Fasco B0 5 R7-RB11 10 1/3000 115 1.00 CCW SP Open Sleeve R7-RB1 10 1/3000 08/0 0.50 CCW SP Open Sleeve NEW! AO Smith 99, Fasco 5075-D500, GRAINGER C NEW! AO Smith 993, Fasco 5075-D30, Grainger C915 R7-RB10 10 1/900 115 1.0 CW SP Open Sleeve Franklin 7001, 80195 R7-RB 1 1/310 115 0.75 CW PSC Open Ball Grainger C, 1TDP7, Fasco 701-39 7 R7-RB155 18 1/80 115 0.75 CW PSC T.E. Ball Grainger 1TDR, C00, Fasco 701-933 8 R7-RB151 150 1/3000 115 1.10 CCW SP Open Sleeve NEW! AO Smith 983 9 R7-RB10 10 1/1595 115 1.0 CCW SP Open Sleeve NEW! AO Smith 58 R7-RB180 180 3/1500 115.00 CCW SP Open Sleeve NEW! AO Smith 971, Fasco B710, Grainger C75 R7-RB1 00 1/700 115 1.10 CW SP Open Sleeve Franklin 8078, 80981, Electrohome EB1 1 R7-RB5 5 1/1550 115 1.50 CCW SP Open Sleeve AMU5, Airdex 1 11 Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End) 13

Direct Drive Blowers Fig.1 Fig. Fig.3 Fig. Fig.5 Fig. Fig.7 Fig.8 Fig.9 Fig.10 Fig.11 Fig.1 Fig.13 Part # CFM Spd/RPM Volts Amps Rot. Type Const. Bearing Comment Fig R7-RB5 5 1/1550 115 1.8 CCW SP Open Sleeve Franklin 80, U.E.59, Fasco B57 1 R7-RB 5 1/150 30 1.90 CCW SP Open Sleeve NEW! AO Smith 911, Fasco B57-, Grainger C89 R7-RB7 73 1/10 115 0.77 CW PSC Open Ball Grainger C7, 1TDR3 3 R7-RB30 30 1/1500 115 1.30 CW SP Open Sleeve NEW! AO Smith 98, Fasco 5075-D500 R7-RB3 3 1/100 115 1.10 CCW PSC Open Ball NEW! AO Smith 97, Grainger C93 5 R7-RB350 350 /1570 115 3.00 CCW SP Open Sleeve NEW! AO Smith 9, Grainger C R7-RB 0 1/1550 30 1.80 CW SP Open Sleeve NEW! AO Smith 91, Grainger 5C507 7 R7-RB5 5 1/1550 115.50 CCW SP Open Sleeve Franklin 805, U.E.0, Fasco B57, Grainger C8 R7-RB95 95 1/1570 115 3.80 CCW SP Open Sleeve NEW! AO Smith 95 9 R7-RB500 500 /1550 115 3.50 CCW SP Open Sleeve NEW! AO Smith 991, Fasco 5079-D500 10 R7-RB5 59 1/130 115.0 CW PSC Open Ball Grainger 1TDT, C5, YJ3 11 R7-RB70 70 /150 115 3.0 CW PSC Open Sleeve NEW! AO Smith 959, Grainger 5C508 1 R7-RB1000 1000 /1100 115/30.00 CCW PSC Open Sleeve NEW! AO Smith 977, Fasco A1000 13 8 1 Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End)

OEM Replacement Motors Fig. 1 Fig. Fig. 3 Fig. Fig. 5 Fig. Fig. 7 Fig. 8 Fig. 9 Air 000 R3-R31 1/0 115 1. SP 1550 CCW.7" 3.3" Ball - 1." 1/" 80093 1 Amana FB-RFB10 1/30 115 1. SP 1/3000 CCW.0" Skel Ball - - FB-RFB158 1/5 115 0.7 PSC 1/350 CCW." 3.3" Sleeve /50 - FB-RFB19-1 1/0 115 1.95 SP 1/350 CCW 7.0" 3.3" Sleeve - - Armstrong Mid eff. Res., D99-5, 701-85, R015859, 0001, 700-07 Hi eff. Res., 95509937, D988-5, R0157, 0000101, Fasco 700-07, 701-858, 70-3151 CUIC Mid eff., Res., 11009001, 1100900, Fasco 701-90, A19 3 FB-RFB50 1/30 08/30 0.70 SP 1/3000 CCW 5.75" 3.3" Ball - - Rooftop, 50-001, 701-101 5 FB-RFB1 1/30 115 1.0 SP 1/3000 CW 5.75" 3.3" Sleeve - - NEW! JA1N111, 155-001 FB-RFB5 1/5 115 1. SP 1/3000 CW 5.8" 3.3" Sleeve - - FB-RFB57-1 1/0 115 1.80 SP 1/300 CW 5.8" 3.3" Ball - - FB-RFB03 1/0 08/30 0.9 SP 1/3000 CCW 8.5" 3.3" Ball - - *Notes: 1 - Comes with gasket(s) Air Ease Mid eff. Ultra 80, Res. 05-00 Air Ease High eff. Ultra 90, 90, Res., 00-003G-00, 00-00, 8-513-00, 3717000, 019001, 701-95 Magic Chef, Air Ease, Olsen Rooftop, Comm., 0388300, 0388B00 7 8 9 Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End) 15

OEM Replacement Motors Fig. 1 Fig. Fig. 3 Fig. Fig. 5 Bradford White FB-RFB19 1/5 115 1.80 SP 1/3300 CCW.87" 3.3" Sleeve - - Carrier (cont. next page...) NEW! Fasco A19, 701-771, AO Smith 958 Part # HP Volts Amps Type RPM Rot. Body FrameBearing Cap Shaft Comments Fig FB-RFB1-1 1/30 115 1.0 SP 1/3000 CCW.3" Skel Ball - - FM-RFM580 1/0 115 1.9 SP 1/3000 CCW 3.5" 3.3" Sleeve - 1.9" 5/1" FM-RFM - 1/0 115/30./1.1 SP 1/3000 CW.5" 3.3" Ball -.3" 1/" FM-RFM5-1/0 115/30.1/1.1 SP 1/3000 CCW.5" 3.3" Ball -.3" 1/" UE-33-1/0 115/30.71/.38 PSC 1/1550 Rev.." 3.3" Ball 7.5/370." 1/" FM-RFM80-1/1 115/30 1.0/0.5 PSC 1/350 Rev. 7.0" 3.3" Ball 7.5/370 1." 1/" FM-RFM3-1/1 30/0./. SP 1/3000 CCW." 3.3" Ball -.3" 1/" *Notes: 1 - Comes with two () wiring harnesses - Comes with 5/1" shaft adapter & Built-in centrifugal switch Bryant, Payne Mid Eff., Res. HC1ZE117-13, 31898-753, 81898753, 58SSE08Q-BC Series 130 Blw. Whl. - -A8 Hi Eff.Res. Carrier HC80001, HC7VE1, V579, V580, UE580, JA1P053N, Bryant P51-307 Comm. Magnetek 571, Carrier HCAU700, UE571 Blw. Whl. - -A855 Comm. Magnetek 570,UE570, Fedders S190007003 Blw. Whl. - -A855 Comm. Magnetek 33, FM-RFM33 Comm. Rooftop, HC80001B, York 0-115-001, 701 Blw. Whl. - -A80(x1") -A85(x") Comm. Magnetek, York, U0 Blw. Whl. - -A855 1 3 5 1 Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End)

OEM Replacement Motors Fig. 1 Fig. Fig. 3 Fig. Fig. 5 Fig. Fig. 7 Carrier(cont. from previous page...) Part # HP Volts Amps Type RPM Rot. Body FrameBearing Cap Shaft Comments Fig FM-RFM53-1 1/1 30/0 1./. SP 1/3000 CCW." 3.3" Ball -.3" 1/" FM-RFM3-1/1 08/30 0.55 PSC 1/350 CW 5.0" 3.3" Ball Inc.8" 5/1" FM-RFM - 1/1 0 0.30 PSC 1/350 CW.7" 3.3" Ball Inc 3.3" 5/1" Consolidated Industries Clare(cont. next page...) FB-RFB10 1/9 115 1. SP 1/300 CCW 5." 3.3" Sleeve - - FB-RFB5 1/0 115 0.85 SP 1/3000 CCW.9" 3.3" Sleeve - - FM-RFM11 1/0 115 1.80 SP 1/3100 CCW 3." 3.3" Sleeve - 1.5" 5/1" Comm. Magnetek 53 Blw. Whl. - -A855 1 HC30GB3, JF1H09N, 8TJE 90/10/150 Comm. Roof Top Blw. Whl. - -A80(x1") -A85(x") HC30GB0, 8TJE 90/10/150 Comm. Roof Top Blw. Whl. - -A80(x1") -A85(x") Part # CFM Volts Amps Type RPM Rot. Body FrameBearing Cap Shaft Comments Fig FB-RFB580 90 115 1.35 SP 1/300 CCW 5.98" 3.3" Sleeve - - NEW! JAIN107, 90950, 100 3 FB-RFB31 90 115 1.73 SP 1/300 CCW 5.98" 3.3" Sleeve - - NEW! JAIN118, 30590, 31101 3 FB-RFB570 95 115 0.90 SP 1/3300 CCW.0" 3.3" Sleeve - - NEW! UE JA1P08, 01570 FB-RFB7 105 115 1.1 SP 1/3300 CCW.33" 3.3" Sleeve - - NEW! UE JA1P090, 0150 Consolidated CHU 5-3, 73-3 High Eff. Res: 100, 0950 Fasco 701-9087, JAIN107NS High Eff Universal Fit, Res: Clare V5 M053, HEG & HEHB 80A Series Residential: Clare V15, Internal Fan, M05, 851100 5 7 *Notes: 1 - Comes with 5/1" shaft adapter & Built-in centrifugal switch - The rear magnetic centrifugal switch found on most replacements has been built into these Rotom models Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End) 17

OEM Replacement Motors Fig. 1 Fig. Fig. 3 Fig. Fig. 5 Fig. Fig. 7 Fig. 8 Fig. 9 Clare(cont. from previous page...) FB-RFB130 1/18 115 0.70 PSC 1/350 CCW 5.0" 3.3" Sleeve /370 - Consolidated CHU 90-3, 108-5, 1-5 High Eff. Res: 101, Fasco 70-90 1 High Eff. Res: Clare V17, FM-RFM1 1/15 115.0 SP 1/3100 CCW." 3.3" Sleeve 1.3" 5/1" M0 Mid Eff. MEG Series, Res: FB-RFB17 1/15 10.0 SP 1/3000 CCW.9" 3.3" Sleeve - - Clare V17, Fasco 7130-009 3 Coleman FB-RFB15 1/50 115 1.1 SP 1/3000 CCW 5." 3.3" Sleeve - - FB-RFB391 1/5 10 1.30 SP 1/300 CCW.0" 3.3" Sleeve - - Dundas Foundry Roof Top Com: Evcon 70-31, 701-90 Dornback High Eff. G90 Res: 90391P, UE95, Fasco 701-759, 701-578 FB-RFB500 1/30 115 1.1 SP 1/80 CCW 5.5" 3.3" Sleeve - - Greenhouse Blower, Com: Fasco 5075-D500, Dundas Foundry Cooler Blower Fan, UE99 Ducane FB-RFB93 1/0 115 1.1 SP 1/800 CCW." 3.3" Sleeve - - FB-RFB8 1/1 115 1.1 SP 1/3000 CCW 7.3" 3.3" Sleeve - - FB-RFB50 1/10 115 0.7 PSC 1/350 CCW.5" 3.3 Sleeve /370 - Ducane, Lennox Air-Flo High Eff. (NEW) MPG50B3, 75B3, B, 100B, 100B5, 15B5 Res: 009301, 0800 Ducane, Lennox Air-Flo High Eff. (New) CMPB50U - 50U3, 75U - 75U3 Res: 08001, 0800, R0301,9L1-01, 9L1, 701-098 Ducane, Lennox Air-Flo High Efficiency (Old) CMPA50UA, 75UA, 100UA, 15UA Res: 005001, 0000101 18 Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End) 5 7 8 9

OEM Replacement Motors Fig. 1 Fig. Fig. 3 Fig. Fig. 5 Fig. Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Goodman FB-RFB1-1 1/50 08/30 0.5 SP 1/3000 CW 8.5" 3.3" Sleeve - - FB-RFB10 1/9 115 1. SP 1/300 CCW 5." 3.3" Sleeve - - FB-RFB185-1/35 10 1.3 SP 1/3000 CW 5.8" Skel Sleeve - - Grimsby Roof Top Com: Goodman B9590-00, Fasco 701-85 1 Goodman-Janitrol GNPS, High Eff. Res: B8330-01, JAIN107NS Goodman-Janitrol GNP Mid Eff. Res: B1859005 3 FB-RFB590 1/30 115 1. SP 3000 CW 5." Skel Ball - - B0590-00, 700303 FB-RFB595 1/30 115 1. SP 3000 CW 5.89" Skel Ball - - B18590-05 5 FB-RFB7 1/30 115 1. SP 3000 CW 5." Skel Ball - - 0131M0000P FB-RFB501 1/0 115.8 SP 3000 CW 5.57" Skel Ball - - 307501 7 FB-RFB111 1/5 115 1. SP 1/3000 CCW.0" 3.3" Sleeve - - SC-OLV-1- Mid Efficiency Res: SBC375, CPL113 8 General Replacement FM-RFM -3 1/35 115/30 1.3/.5 SP 1/3000 CCW 5.8" 3.3" Ball - 3.9" 5/1" FM-RFM10-3 1/35 115/30 1./0. SP 1/3000 CW 5." 3.3" Ball - 3.9" 5/1" *Notes: 1 - Built-in end switch - Comes with gasket 3 - Feature an internal fan, stainless steel shaft and built-in centrifugal switch Franklin 80137, Fasco D0, D08 EJ Walsh 81191017, Fedders FM-RFM10 - Fasco D10, D09, D1, 1/10 115/30 1.5/0.7 PSC 1/3000 Rev. 7.1" 3.3" Ball 7.5/370 3.7" 1/" 10 Reznor UE-37-1/8 115 1.8 PSC 1/3000 Rev..5" 3.3" Ball /370 3.75" 1/" Magnetek 371 11 UE-371-1/8 08/30 0.89 PSC 1/3000 Rev..5" 3.3" Ball /370 3.75" 1/" Magnetek 37 11 9 9 Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End) 19

OEM Replacement Motors Coupling Included Fig. 1 Fig. Fig. 3 Fig. Fig. 5 Fig. Fig. 7 Fig. 8 Fig. 9 G.S.W. FB-RFB17-1 1/0 115 1.3 SP 1/300 CCW 1.5" 3.3" Sleeve - - John Woods Water Heater GSW 317, Fasco 701-837 1 FB-RFB17 1/0 115 1.3 SP 1/300 CCW 1.5" 3.3" Sleeve - - Heil Quaker fb-rfb7 1/100 115 0.0 SP 1/3150 CCW 5.71" 3.3" Sleeve - - A0, 107, X89-55 3 ICP (cont. next page...) John Woods Water Heater GSW 317, Fasco 701-975 FM-RFM50-1/00 08/30 0.5 SP 1/3000 CCW.9" Skel. Sleeve - 0.8" 1/" FB-RFB11 1/5 115 1.00 SP 1/800 CCW.0" 3.3" Ball - - FB-RFB571 1/50 30 0.30 PSC /3000 CW.35" 3.3" Ball Inc - FB-RFB8 1/50 08/30 0. SP 1/3000 CW 5.8" 3.3" Ball - - Keeprite Roof Top RGA Series, Com: 5015K, 50015K, Blw. Whl. 93-310(") 93-10(") Residential: 109073-7, 101039 NEW! 701-1008, 701-10580, A19, 1085571, 1110008 Commercial: 1058, 11933-01 5 7 FB-RFB105 1/50 30 0. SP 1/300 CW 5.7" 3.3" Sleeve - - FB-RFB8-3 1/50 115 0.9 SP 1/3000 CCW 5.5" 3.3" Sleeve - - Keeprite Roof Top RGA, RGAA, Com: Keeprite 10501, JA1M109NS, Heil Quaker, Intercity, HQ10501, Whirlpool, A151, A.O. 77 Keeprite CUGE, CPGE, CULE, MGH Mid Eff. Res: 10018 9 8 *Notes: 1 - Includes Coupling. - Comes with 5/1" shaft adapter. Built-in centrifugal switch. 3 - Comes with two () gaskets, high temp. silicone & instructions 0 Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End)

OEM Replacement Motors Fig. 1 Fig. Fig. 3 Fig. Fig. 5 Fig. Fig. 7 Fig. 8 Coupling Included Fig. 9 Fig. 10 Fig. 11 ICP (cont. from previous page...)(cont. next page...) FB-RFB107-1 1/0 08/30 0.3 PSC /3350 /900 CW 8.70" 3.3" Sleeve 3/370 - Keeprite PGB, PGA, PGD, GPD, RGMA Com: Keeprite 10975, 15-0-30 Ton 1 FB-RFB33 1/35 115 1.5 SP 1/3000 CW.00" Skel Ball - - 10133, 10159 FB-RFB833 1/30 115 1. SP 1/3000 CCW.50" Skel Ball - - 1013833 3 M3-R09 1/30 115 1.1 SP 1/1550 CW 3.0".1" Sleeve -." 1/" M3-R1 1/30 115 1.1 SP 1/1550 CCW 3.0".1" Sleeve -." 1/" FB-RFB 1/5 115 1.3 SP 1/300 CCW 7.0" 3.3" Sleeve - - B-RFB350 1/5 115 0.8 PSC 1/350 CW 7.10" 3.3" Ball 5/370 - FB-RFB13 1/5 10 1.5 SP 1/3000 CCW.0" 3.3" Sleeve - - FB-RFB15-1/5 10 0.7 PSC 1/350 CW 5.3" 3.3" Ball /50 - FB-RFB11 1/ 115 0.7 PSC 1/350 CW 7.75" 3.3" Sleeve /50 - FB-RFB330 1/0 115. SP 3000 CCW 5.5" Skel Ball - - FB-RFB170 1/5 115.3 SP 1/800 CW 5.75" 3.3" Ball - - Intercity Condo & Apartment Exhaust Fan Motor UE009 Intercity Condo & Apartment Exhaust Fan Motor UE010 Keeprite, 70111099, B0, CRC Keeprite CGJ, CGK High Eff. 50, 75, 100, 15 Res: 1011350 Hardware Connection Kit - FB-RFB350-1 Keeprite, Heil, Comfortmaker NTC Mid Eff. Res: 10103, 170807, 1010975, Airco, Tempstar Keeprite, Heil, Comfortmaker NTGM High Effi. Res: 10099, 1009518, 101057, 10110, 10111, 1180, Airco, Tempstar Res: 70-515, 70-379, 70-59 Intercity 119097, 10081P A307 330701-701, 3918-701, 1013915 Res: 701-1008, 701-10580 5 7 8 9 10 11 *Notes: 1 - Comes with gaskets - Vent Restrictor Orifice Plates: 9-10089 ICP 50 & 75, 9-100899 ICP 100, 9-11015 ICP 15, Comes with coupling, pins, O-rings and gaskets Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End) 1

OEM Replacement Motors Fig. 1 Fig. Fig. 3 Fig. Fig. 5 Fig. Fig. 7 ICP (cont. from previous page...) FM-RFM3-1 1/1 08/30 0.55 PSC 1/350 CW 5.0" 3.3" Ball /370.8" 5/1" FM-RFM -1 1/1 0 0.3 PSC 1/350 CW.7" 3.3" Ball /370 3.3" 5/1" FM-RFM9-1/15 08/30 1.1 SP 1/3000 CCW." 3.3" Ball - - FB-RFB9 1/1 08/30 1.1 SP 1/3000 CCW 10.0" 3.3" Ball - - Lennox(cont. next page...) FB-RFB135 1/5 115 0.7 SP 1/3000 CW 5.5" 3.3" Sleeve - - Air-Flo Unit Heater Com.: Lennox 19J0, Fasco 711-881, 701-857 FB-RFB390 1/5 115 0.7 SP 1/3000 CCW 5.5" 3.3" Sleeve - - Res: 88J3901, 701-9, A19 5 FB-RFB95 1/50 115 1.0 SP 1/3000 CW 5.3" Skel. Ball - - NEW! W95, 31L5501 FB-RFB3 1/50 115 0.8 SP 1/3000 CW 5.8" 3.3" Sleeve - - G Mid Eff. 3K1 FB-RFB98 1/50 115 0.8 SP 1/3000 CW 5.8" 3.3" Sleeve - - NEW! G Mid Eff. 11K98 Kit FB-RFB99 1/50 115 0.8 SP 1/3000 CW 5.8" 3.3" Sleeve - - NEW! G Mid Eff. 11K99 Kit FB-RFB1-3 1/50 115 0.8 SP 1/3000 CW 5.8" 3.3" Sleeve HC30GB3, JF1H09N, 8TJE 90/10/150 Com. Roof Top, ICP 117138, JF1H09N Blw. Whl. - -A80(x1") -A85(x") HC30GB0, 8TJE 90/10/150 Com. Roof Top ICP 117137 Blw. Whl. - -A80(x1") -A85(x") Keeprite Roof Top, Blw. Whl. - -A810 Keeprite, Heil, Comfortmaker RGB Series Roof Top Com: 50193 Res: K101, Fasco 701-9593 FB-RFB80 1/50 115 1.30 SP 1/3000 CW 5.83" Skel Ball - - 88K801, 85L9 7 1 1 3 *Notes: 1 - The rear magnetic centrifugal switch found on most replacements has been built into these Rotom models - Built-in centrifugal switch 3 - Features air tube fitting Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End)

OEM Replacement Motors Fig. 1 Fig. Fig. 3 Fig. Fig. 5 Fig. Fig. 7 Fig. 8 Fig. 9 Fig. 10 Lennox (cont. from previous page...) FM-RFM1198 1/30 115 1.5 SP 1/300 CCW 3.0" 3.3" Sleeve - ¼" 5/1" FB-RFB790 1/8 115 1.8 SP 1/3000 CCW Skel Ball - - FB-RFB810 1/8 115 1.8 SP 1/3000 CCW Skel Ball - - Roof Top Com: Lennox 5J101, Fasco 711-877 Res: 0M7901, 7058-017, A07 Com: 0M8101, 7058-03, A08 FM-RFM890 1/5 08/30 0.7 SP 1/300 CCW 3.9" 3.3" Ball -.3" 5/1" GCS3 Roof Top Com: Lennox 98G8901 Fasco 711-7091 BLW. WHL - -A877 FB-RFB385 1/0 115 0.8 PSC /300 /800 CCW 3.3" Ball 7.5/370 - Res: 38M5001, 70-51, A09 FB-RFB57-1 1/0 115 1.80 SP 1/300 CW 5.8" 3.3" Ball - - FB-RFB550 1/1 30 0.83 SP 1/3000 CCW 3.3" Ball - - FB-RFB811 1/15 115. SP 1/300 CCW 3.3" Ball - - FB-RFB101-1/1 08/30 0.5 PSC 1/300 CCW 8.5" 3.3" Ball 3/370 - FB-RFB701 1/10 08/30 0. PSC 1/300 CCW.75" 3.3" Ball /370 - FB-RFB30 1/10 0.38/.33 PSC 1/300 CW 3.3" Sleeve - G High Eff. Series Res: 8K1, Fasco 701-950 Com: 5M5501, 701-1131, A17 Res: 81M101, 701-113, A11 GCS Roof Top Com: Lennox 3G8101, 13537, 07, 8G01, Fasco 70-179, 70-3577 Roof Top Com: Lennox 98G8701 Com: 9M301, 70-555, 70-051, 70-518, 97J8101 1 3 5 7 5 8 9 10 *Notes: 1 - Comes with gasket set - Comes with gasket. Built-in centrifugal switch Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End) 3

OEM Replacement Motors Fig. 1 Fig. Fig. 3 Fig. Fig. 5 Fig. Modine FB-RFB598 1/15 00/30.95/1.1 SP 1/330 CCW 3.3" Sleeve - - 5H73598-1 Newmac R7-RB33-1 1/55 115 0.88 SP 1/300 CW." 3.3" Sleeve - - Nordyne, Frigidaire, Miller Nutech Oil & Wood Furnace 00001 FB-RFB903-1/5 115 1.10 SP 1/3000 CCW 5." 3.3" Sleeve - - FB-RFB90 1/19 115 0.70 PSC 1/350 CCW 5.5" 3.3" Sleeve /370 - G5RA, GRA, G3 Mid Eff. Res.: 903111, UE95 G5RC, GRC, G1, G High Eff Res.: 90977 Heat Recovery Blower O1-R5 1/15 115.30 SP 3/1550 CW.0" 3.3" Sleeve -.3" 5/1".1" Electrohome 88-513-133, 5 15, Nutech Lifebreath 30 M-R55 1/1 115 1.10 PSC 1/1550 CCW 3.0" 5.0" Sleeve 5/370.5" 3/8"." M-R3 1/1 115 1.80 PSC 1/1550 CCW 3." 5.0" Ball 3/370.7" 3/8"." Heat Recovery Blower AO81B355, Fasco 718-05 Heat Recovery Blower Nubreath 3-0, GE5KCP98G850BS, Fasco 7185-0 3 *Notes: 1 - Features a built-in variable speed control - Comes with gasket Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End)

OEM Replacement Motors Fig. 1 Fig. Fig. 3 Fig. Fig. 5 Fig. Fig. 7 Fig. 8 Fig. 9 Olsen FB-RFB181-1 1/5 115 1. SP 1/300 CW." 3.3" Ball - - FB-RFB00-1 1/5 115 1. SP 1/300 CCW." 3.3" Ball - - Airco High Eff HCS- 0, 75, 81, 90 Left Hand Discharge Res: 1810 HCS- High Eff. 0, 75, 81, 90 Right Hand Discharge Residential: 008, 1105103 1 FB-RFB10 1/9 115 1. SP 1/300 CCW 5." 3.3" Sleeve - - Consolidated NUP 5-3, 7-3 High Eff. Res: 100, JAIN107NS 3 FB-RFB11-1/5 115 1.30 SP 1/3000 CCW.0" 3.3" Sleeve - - Airco HMS/HMS-T Mid Eff. Res: 98, 987, 83 FB-RFB7 1/30 115 1.70 SP 3000 CW 5.9 Skel Ball 97 5 FB-RFB111 1/5 10 1. SP 1/3000 CCW.0" 3.3" Sleeve - - Residential: SBC375, CPL113 FB-RFB03 1/0 08/30 0.9 SP 1/3000 CCW 8.5" 3.3" Ball - - Com. Rooftop 355A 7 FB-RFB130 1/18 115 0.70 PSC 1/350 CCW 5.0" 3.3" Sleeve /370 - Reznor Consolidated NUP N1, 1, 0, 90-3, 108-5, 1-5 H.E. Res: 101 8 FM-RFM78-3 1/10 115/30 1.3/0.7 PSC 1/300 Rev..1" 3.3" Ball /370 3.3" 5/1" Commercial: Reznor 38 (115V), 3 (08/30), FM-RFM7, FM-RFM8 BLW. WHL - -A875 9 *Notes: 1 - Comes with three (3) brackets, fastening hardware, drain tubing & instructions. - Includes pressure switch, two () gaskets, mounting plate, silicone tubing & instructions 3 - Double blower wheel 3.15" 5/1" Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End) 5

OEM Replacement Motors Fig. 1 Fig. Fig. 3 Fig. Fig. 5 Fig. Fig. 7 Fig. 8 Fig. 9 Rheem-Ruud FB-RFB139-1 Hot Water Heater SP1108, 1/55 115 0.95 SP 1/970 CCW 11.0" 3.3" Sleeve - - Fasco 70-757 1 FB-RFB1 - RGDE Mid Eff. Res: Fasco 1/50 115 1.1 SP 1/3000 CW 5.3" 3.3" Sleeve - - 70-119-83, A079 FB-RFB090-1/50 115 1.10 SP 1/3000 CCW 5.0" 3.3" Sleeve - - RGDE Mid Eff. Res: 70-19-01, Fasco 701-539, Magnetek JA1M10 3 FB-RFB107-1/0 08/30 0.3 PSC /3350 /900 CW 8.70" 3.3" Sleeve 3/370 - Roof Top, PGB, PGA, PGD, GPD, RGMA Com: Reem- Rudd 1070770, 101070, 107701 15-0-30 Ton FB-RFB189-3 1/0 115 1.0 SP 1/3000 CCW 5.5" 3.3" Sleeve - - FB-RFB1 1/5 08/30 0. SP 1/300 CCW 3.3" Sleeve - - FB-RFB1 1/5 115 0.7 PSC 1/350 CCW.0" 3.3" Sleeve /370 - Rheem-Ruud 09-189, UE JA1M11N Com: 70-31-81, 701-957, A1 Weather King RGT High Eff. Res: 70-1-81, 70-19-01, 70-157-03, 70-0-01, Fasco 70-1881 5 7 FB-RFB13 1/0 115 0.75 PSC 1/350 CCW.5" 3.3" Sleeve /50 - Weather King RGT High Eff. Res: 70-033-01, Fasco 70-381 FB-RFB0 1/0 115 0.9 PSC /300 /00 CW 3.3" Sleeve - Residential: 70-0-01, 70-395, A FB-RFB1-1/0 115 1.71 SP 1/300 CCW.3" Skel Ball - - Weather King RGP Mid Eff. Conquest 800 Res: Fasco 70-157-03, 70-838-0 7 8 9 *Notes: 1 - Includes coupling, adapter horn, plug, screws & tubing - Comes wiuth gasket 3 - Includes two () gaskets & 90 brass fitting - Comes with gasket mounted Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End)

OEM Replacement Motors Fig. 1 Fig. Fig. 3 Fig. Fig. 5 Fig. Fig. 7 Fig. 8 Fig. 9 Fig. 10 Trane(cont. next page...) FB-RFB15 1/50 115 1.0 SP 1/3000 CCW 5.89" 3.3" Sleeve - - NEW! 51-150-01 1 TUD0, 0, 80, 100 Mid FB-RFB13 1/5 115 0.95 SP 1/3000 CCW 5." 3.3" Sleeve - - Eff., Res: BLW0073, Fasco 701-88 Rooftop Flue Exhaust FB-RFB380 1/0 08/30 0.5 PSC 1/800 CCW 8.10" 3.3" Ball /370 - Blower Res: Trane X380003037, 70-1709 3 FB-RFB5-3 1/35 115/30.95/.9 SP 1/3000 CW 8." 3.3" Ball - - Com: 38050005 FB-RFB150 1/30 08/30 0.0 SP 1/3000 CW 5.5" 3.3" Ball - - NEW! A150, 701-7833 5 FB-RFB73-1 1/30 115/30.8/. SP 1/3000 CW 5.3" 3.3" Ball - - Rooftop Com: Trane 38005, Amana-Tappan, Janitrol 9-3, UE77 FB-RFB787 1/30 115 1. SP 3000 CW.00" Skel Ball - - D330787P01, 700558 7 UE-95 1/30 115 0. PSC 3/1100 CW.0" 5" Sleeve Inc. 8.5" 1/" UE-908 1/0 115 0. PSC 3/1100 Rev. 3.5" 5" Sleeve Inc. 9.5" 1/" UE-1 1/30 115 0.5 PSC 3/1075 CW 3.5" 5" Sleeve Inc. 8.5" 1/" 9" FB-RFB130 1/18 115 0.7 PSC 1/350 CCW 5.0" 3.3" Sleeve /370 - MOT 1878, MOT 1875, X7050019-01-7, EM K8HXBYH-95 MOT 1875, X7050019-0, EM K8HXBHZ955 MOT 187, CX70500133-01, UE DE3E15 TUCG 0, 80, 100 High Eff. Res: BW000517, UE957 8 8 9 10 *Notes: 1 - Comes with round and square stud brackets Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End) 7

OEM Replacement Motors Fig. 1 Fig. Fig. 3 Fig. Fig. 5 Fig. Fig. 7 Trane (cont. from previous page...) MOT 1877, X70 50019-0-7, UE-953 1/15 115 0.8 PSC 3/1100 CW 3.5" 5" Sleeve Inc. 10.5" 1/" 10.5" EM K8HXBJA-95 1 UE-95 1/8 115 1. PSC 3/1500 CW.0" 5" Sleeve Inc. 9" 1/" 7.5" UE-955 1/ 115.0 PSC 3/1500 CW.0" 5" Sleeve Inc. 10.5" 1/" 10.5" UE- 1/ 77 1.1 PSC 3/175 CW.0" 5" Sleeve Inc. 8" 1/" 8" MOT 1978, MOT 81, X70 50019-11-7, EM K8HXCKT-119 MOT 1979, MOT 8, X70 50019-1-7, EM K8HXCKS-118 MOT 89, X7050035, UE DEG101 1 Vanee R3-R38 1/15 110/115 1.1 PSC /1550 CCW.1" 3.3" Sleeve /370 3.35" 3/8" Venmar Heat Recovery Motor M1703, Fasco 7190-039 3 0101, Fasco 7190-71, Kit R-R 1/17 115 0.90 PSC 3/10 CW.13" 3.3" Sleeve 7.5/370 3.5" 3/8" 3.5" 107, 109, 1109 R-R38 1/1 115 1.03 PSC /100 CW.31" 3.3" Sleeve /370 1.55" 5/1" 01038, Fasco 7190-008 5 0100, Fasco 7190-153, Kit R3-R3 1/7 115 1.8 PSC 3/130 CW.78 3.3" Sleeve 7.5/370.97" 3/8" 3" 10, 1151 R-R 1/ 115.89 PSC 3/190 CW.93" 3.3" Sleeve 7.5/370.0" 3/8" 009, Fasco 7190-15 7 8 Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End)

OEM Replacement Motors Fig. 1 Fig. Fig. 3 Fig. Fig. 5 Fig. Fig. 7 Fig. 8 Williamson Furnace FB-RFB58 1/15 115 1.1 SP 1/3000 CCW 5.71" 3.3" Sleeve - - FB-RFB118 1/15 115 1.8 SP 1/3000 CCW 5.93" 3.3" Sleeve - - York(cont. next page...) NEW! A080, 701-5510, 0-58, S88-81 NEW! A118, 701-999, 701-70, X89-50 1 1 FB-RFB51-1 1/50 115 1.10 SP 1/3000 CW 5.3" 3.3" Ball - - FB-RFB3 1/0 08/30 0.5 SP 1/3000 CW.3" 3.3" Ball - - FB-RFB1-1/0 08/30 0.5 SP 1/3000 CCW 8.0" 3.3" Sleeve - - P9UGD, PHUGD Standard Eff. Res: 0-510-000, 0-55-10 C000, Luxaire Roof Top, D8SA, D9SA Com: 0-39-700, UE771, Fasco A03, UE, 701-31 Roof Top DCG Unit Com: York 0-115-017, 018, 705, 3-5999-000 3 FB-RFB1-3 1/0 0 0.30 PSC 1/300 Rev. 9.5" 3.3" Ball /370 - FB-RFB -3 1/0 0 0.30 PSC 1/300 Rev. 10.5" 3.3" Ball /370 - FM-RFM1-3 1/0 0 0.37 SP 1/300 CW 5.7" 3.3" Ball -.5" 1/" FB-RFB9-1/0 08/30 /0 0.3 SP 1/3000 CCW 8." 3.3" Sleeve - - D1, D, 7.5 Ton Roof Top Unit Com: 0-115-017, 00, 713, Fasco 71-57 BLW. WHL - -A80("x1"x1/") D1, D Roof Top Unit Com: 0-115-017, 00, 713, Fasco 71-57 BLW. WHL - -A85("x"x5/1") Commercial: 0-115-018B, 019B Roof Top DCG Com: York 3-09-700, -900, 3-90-0000, 701987 5 7 8 *Notes: 1 - Comes with gasket - Comes with gasket. Built-in centrifugal switch 3 - Built-in centrifugal switch Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End) 9

OEM Replacement Motors Fig. 1 Fig. Fig. 3 Fig. Fig. 5 Fig. Fig. 7 Fig. 8 York(cont. from previous page...)(cont. next page...) Com: York 0-0-000, FB-RFB5-1 001, 007, -39, 1/35 115/30.95/.9 SP 1/3000 CW 8." 3.3" Ball - - -0, UE770, 08, 51, 1 Fasco A03 FB-RFB3-1/3 0 0.37 SP 1/300 CW 8.5" 3.3" Ball - - D1, D Roof Top Unit Com: 0-115-017, 019B, 00, 713, Fasco 71-57 York Furnace P-HUA01 FB-RFB15-3 Mid Eff. Blower N0000 1/30 115 1. SP 1/3000 CCW.0" 3.3" Sleeve - - Res: York 8-7519-000, 3 Fasco 701-98, Luxaire FB-RFB15-1/5 115 0.70 PSC 1/350 CCW." 3.3" Sleeve /370 - York Furnace P3-URB High Eff. Blower Res: York 0-590-000, Coleman 90391P, Fasco 70-3958, A15, Luxaire York P3UR A, B, C, D High Eff. Res: 7319-70, FB-RFB137 1/5 115 0.70 PSC 1/350 CCW.0" 3.3" Sleeve /50-3500-7000, Fasco 70-5, Luxaire D1, D Roof Top Unit 3.5 To 5 FB-RFB5-5 Ton Com: 0-115-017, 018, 1/1 30/0 1./0. SP 1/3000 CW 10. 3.3" Ball - - 00, 713, Fasco 71-57 BLW. WHL - -A80("x1"x1/") FB-RFB55-5 1/1 30/0 1./. SP 1/3000 CW 11.1 3.3" Ball - - York D3CG07N105-5D Roof Top 7.5-0 Ton Com: 0-115-017, 018, 00, Fasco 71-57 BLW. WHL--A85("x1"x5/1") 7 York D1, D, D3 Roof Top Unit FM-RFM3-5 Magnetek 0, Fasco D1171, 1/1 30/0./. SP 1/3000 CCW." 3.3" Ball -.3" 1/" U0 8 BLW. WHL - -A855 *Notes: 1 - Comes with round & square mounting brackets and mounting hardware. Built-in centrifugal switch - Built-in centrifugal switch 3 - Comes with gasket mounted - Comes with gaskets 5 - Includes -A8 & -A87 blower wheels. Built in centrifugal switch. 30 Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End)

OEM Replacement Motors Fig. 1 Fig. Fig. 3 Fig. Fig. 5 Fig. York(cont. from previous page...) FM-RFM53-1 1/1 30/0 1./. SP 1/3000 CW." 3.3" Ball -.3" 1/" FB-RFB187-1/10 0 0.30 PSC 1/300 CW.8" 3.3" Ball /370 3/8" 8 ¾" FM-RFM187-3 1/10 0 0.30 PSC 1/300 CW.8" 3.3" Ball /370 3/8" 8 ¾" FM-RFM0-1/10 0 0.30 PSC 1/300 Rev..9" 3.3" Ball /370 ½" ¼" FM-RFM30-1/8 30 0.0 PSC 1/300 Rev..9" 3.3" Ball /370 ½" ¼" FB-RFB31-1 1/8 30 0. PSC 1/300 Rev. 9." 3.3" Ball /370 - FB-RFB3-1 1/8 30 0. PSC 1/300 Rev. 10.5" 3.3" Ball /370 - *Notes: 1 - Built-in centrifugal switch - Includes -A8 & -A87 blower wheels. Built in centrifugal switch. 3 - DOES NOT include -A8 & -A87 blower wheels. Built in centrifugal switch. - Comes with 5/1" shaft adapter. Built-in centrifugal switch York D1, D, D3 Roof Top Unit Magnetek 53, Fasco D117 BLW. WHL - -A850 York 10 Ton Roof Top Blower DICG10N155A Commercial: 0-500-500, 5005, 570, D1187 York 10 Ton Roof Top Blower DICG10N155A Commercial: 0-500-500, 5005, 570, D1187 York D1, D Roof Top Unit 0-115-01, 017, 700, 709, 713, Fasco D1171, YVFM50 York D1, D Roof Top Unit 0-115-00, 71 York D1, D 5 Ton Roof Top Unit Com: York 0-115-71, 018 BLW. WHL - -A80("x1"x1/") York D1, D 7.5 Ton Roof Top Unit Com: York 0-115-71, 018 BLW. WHL - -A85("x"x5/1") LEGAL NOTICE Rotom is a registered trademark of Alltemp Products Company Limited (Alltemp) It is important to note that Alltemp is not affiliated with any of the original equipment manufacturers or their brands which may be referred to herein. All brand names or trademarks used herein are the property of their respective owners and all original equipment manufacturers names, numbers, symbols and descriptions are for cross reference purposes only. It is not implied that any part referred to herein is the product of any original equipment manufacturer, nor any of its associated brands. TRADEMARK DISCLAIMER Product names, logos, brands, and other trademarks featured within are the property of their respective trademark holders. These trademark holders are not affiliated with Alltemp, our products or our website. No association between Alltemp and any trademark holder is expressed or implied. Names, numbers, symbols and descriptions are for cross reference purposes only. Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End) 1 3 5 31

Pulleys & Bearings Aluminium Pulleys 7-0 Blower Pulleys Part # Bore Diameter 7-50* 5" 7-0 " 7-70 7" 7-80 3/" 8" 7-90 9" 7-10 10" 7-1 1" * 5" pulley is solid Blower Pulleys - Continued Part # Bore Diameter 7-80 " 7-870 7" 7-880 8" 7-890 1" 9" 7-810 10" 7-81 1" 7-35 Variable Speed Pulleys Part # Bore Diameter 7-35 3 1/" 7-350 3 1/" 1/" 7-375 3 3/" 7-00 " 7-535 3 1/" 7-5350 3 1/" 5/8" 7-5375 3 3/" 7-500 " Cast aluminum pulley mfg'd to OEM specs Bearings Ball Bearings Bearings complete with collar. Part # Bore OD Replaces 7-33-1 LRCR 3/" 1 13/1" 7-33- () Bearings & () Collars 7-3-1 1" ¼" RCR 7-33-1 Sleeve Bearing Packs Kits include bearings & rubber sleeves. Part # Bore OD Type Replaces 7-03- 3/" 1 5/3" Delhi Oil 7-0- 1" ½" Delhi 7-135- 5/8" 1 7/8" Lau 7-13- Delhi 1 13/1" 7-137- 3/" Lau & Lennox 7-138- 1 7/8" Sealed Torin 7-1- Delhi 7-17- 1" ½" Lau & Lennox 7-18- Torin Bearings & Sleeves Part # Bore Type 7-13-R 3/" Rubber sleeve 7-1-R 1" Rubber sleeve 7-13-B 3/" Sealed bearing 7-1-B 1" Sealed bearing 7-03-B 3/" Oil bearing 7-0-B 1" Oil bearing 7-13-R 7-03- Oil Type 7-13- Sealed Type 7-13-B 7-0-B Thrust Collar Packs Part # Description 7-1 () 5/8" collars & washers. 7-15 () 3/" collars & washers. 7-1 () 1" collars & washers. 7-15 3 Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End)

Shafts & Mounting Brackets Shafts Shafts Sized to bearing manufacturers specifications. Slabbed on pulley end. Rust protected. Individually wrapped. Protective end caps. Part number and size listed on every shaft. 7-110 Shafts Part # Diameter Length Coss Reference 7-1100 11" Lennox, 100157 7-1110 11 5/8" Lennox 7-11 1 3/" 8-5-95C, 10000 7-100 1" 8-5-5C, 100159 7-1550 15 5/1" G9, G1-9, 10010 8--308, WW15X3, 1001, 10013, 7-100 1" 100198 3/" 7-110 1 5/8" 8-5-0C, G10, G110, 100011, 10011 7-1800 18" 8-5-7C, 8-5-1C, 10001 7-190 19 1/8" G1, 10018 7-000 0" M90-5, RS0 7-00 " 100013 7-00 " 8-5-3C 7-300 3" 7-8000 0" G15-7, 10015, 100078, 100081, 10007 7-800 1" 5" 8-5-5C & 55C, M90-57, G15, 100037, 55, 5, 1001 7-8300 3" P-S-09, M90-70, 10018, 10005, 1005 Mounting Brackets 9-A817 Torsion Flex Bracket 5.0" and 5.5" Dia. 9" & 10" Bolt Circles 9-A8550 5" Diameter 9-A8555 5.5" Diameter 9" & 10" Bolt Circles 5.5" Diameter for 1/ HP and above 9-A855 9" Bolt Circle 9-A8557 10" Bolt Circle HEAVY DUTY Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End) 33

Air Duct Booster Designed to be installed at any angle in the branch duct of under-ventilated rooms to increase either hot or cool air flow supply. One year limited warranty. Poor Air Flow From Main Supply Control Options Manual Control 115V Source - continuous operation. 115V Switch - manual ON/ OFF ctrl. Enhanced / Air Flow To Problem Area Duct Boosters In-Line Air Duct Booster Fans Automatic Control Wire to furnace fan. Wire to fan switch. Wire to a sail switch. Wire to a pressure switch. Wire to thermostat. Standard Air Duct Boosters Part # Description Max Boosted CFM Free Air CFM Watts Amps dba Blade Housing Length T9-DB8 " - 8" Universal Round 50 10 30 0.35 50 Polycarbonate " 11" T9-DB-CR " Rnd Double Crimp 50 10 30 0.35 50 Polycarbonate 8" T9-DB " Round 80 0 30 0.30 5 Polycarbonate " T9-DB5 5" Round 5 10 30 0.35 51 Polycarbonate " T9-DB " Round 50 10 30 0.35 50 Polycarbonate " T9-DB8 8" Round 500 10 0 0.75 5 Polycarbonate 8" T9-DB10 10" Round 50 300 10 1.50 55 Aluminium 8" T9-DB1R 1" Round 800 50 10 1.50 55 Aluminium 8" Two Speed Air Duct Boosters Part # Description Max Boosted CFM Free Air CFM Watts Amps dba Blade T9-DB- " Round Speed 00/300 10/180 30 0.35 50/5 Polycarbonate T9-DB8-8" Round Speed 500/00 10/50 0 0.85 50/55 Polycarbonate T9-DB10-10" Round Speed 50/900 300/0 135 1.70 5/59 Aluminium T9-DB8 T9-DB T9-DB5- -Pole Duct Boosters Designed for larger ducts requiring commercial grade power and performance. Part # Description Max Boosted Free Air Watts Amps CFM CFM dba Blade T9-DB1 1" Round 110 700 10 1.00 1 Aluminium T9-DB1 1" Round 1580 900 10 1.00 1 Aluminium T9-DB1 1" Round 170 1100 10 1.00 5 Aluminium Duct Thermostat Plug-In Duct Stat The T9-DS5110 duct stat simplifies installation of in-line duct booster fans by eliminating electrical connections at the furnace. Plug-In Switch - Thermostatically Controlled Economical and reliable automatic on/off control for in-line duct booster fans. Mounts on duct or wall to control ambient room temperature. Adjustable temperature range: 5 F (7 C) to 110 F (3 C) and differential. ' Grounded cord. Year round use, ON/ OFF, AUTO heating and AUTO cooling. Controls various devices, including alarms, heat lamps, lights, louvers, etc. Part # Description Volts Dimensions Weight 5 Amp maximum load 5.50" 3.5" 1.5 T9-DS5110 115 (replaceable 5A fuse)..5" lbs. T9-DS5110 illustrated -Pole Duct Booster 3 Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End)

In-line Duct Boosters In-Line Air Duct Booster Fans Features High Volume & Pressure Installs In Any Position Ball Bearings Are Permanently Sealed & Lubricated Backwards Inclined Blades Vibration Absorbing Material Class B TP Auto Reset UB Protected / Flame Retardant - Thermal Plastic Resin 10 F(0 C) Maximum Air Stream Tempurature Applications Ventilation Exhaust In-Line Boosting Radon Mitigation Dryer Vent Boosting Duct Muffler Part # Amps Watts Duct Dia. Volts Hz CFM T9-TF10 0.53 0 " 115 0 00 T9-TF10 1.00 70 " 115 0 09 T9-TF108 1.70 10 8" 115 0 50 Serious Air Power With Quiet Operation 5 YEAR LIMITED Warranty Accessories Speed Control Power Cord Auto Switch Duct Mufflers Part # Diameter Length T9-DM105 5" " T9-DM10 " " T9-DM108 8" " T9-DM110 10" 3" T9-DM11 1" 3" Cat # ROT071811 ROTOM is a registered trade marks of ALLTEMP PRODUCTS COMPANY LIMITED. ALLTEMP has made an effort to illustrate with photos, outline drawings and/or descriptions, the products in this catalogue. These are for the sole purpose of identification. We do not express or imply that products conform exactly to the descriptions, drawings and/or photos. All reasonable effort has been made to accurately determine a suitable product. However, all users are solely responsible to evaluate and determine for themselves the suitability of the product purchased for the use intended. All information, data and dimension tables in this catalogue have been carefully compiled and thoroughly checked. However, no responsibility for possible errors or omissions can be assumed. The company reserves the right to change specifications and other information included in this catalogue without notice. The vendor s responsibility shall be limited only to its written warranty and the vendor shall not be responsible for any loss, cost or damage whatsoever from the use of this product by you or your customers. Motors Are Sleeve Bearing Unless Indicated - Rotation Determined Opposite Shaft End (Double Shaft Determined By Lead End) 35