Central Boiler Heating Accessories and Parts Catalog To place an order use the dealer locator on our website: www.centralboiler.com or call for nearest dealer: 1-800-248-4681 or 218-782-2575
DIMENSIONS AND MEASUREMENTS Foundation* Dimensions 7 4 7 7 4 7 Slab Required CL 7260 Pallet Burner Slab Optional SCL 5636 47 x 10 in. Opening Slab Optional HF 60 Front 61 4 7 7 31x 10 in. Opening Slab Optional HFSS 36 Front 43 56 80 39 x 10 in. Opening Slab Optional HF 48 Front 53 CAUTION Do not use any combustible materials for the foundation. 68 NOTE: All dimensions are in inches. 9 60" Front 73" Slab Optional CL 4436 Front 24" 50" 15" 6" 24" 2" Optional 72" 8" 5" 72" Front Front 62" 24" 50" Slab Optional CL 5648 SCL 5648 Furnace must be installed on a non-combustible surface or foundation that incorporates an enclosure that will prevent supply and return lines from any possible exposure to sunlight, fire, or physical damage that may be caused by an occurrence outside the furnace enclosure. Foundation may consist of concrete, crushed rock, or patio blocks. * Foundations dimensions are 3 in. larger than the furnace. When the furnace is centered on the foundation, an 1 1/2 in. of foundation will be present on all sides of the furnace. 24" 15" 6" 15" 6" 2" Optional 2" Optional D H F G E B A C CL 4436 CL 5648 & SCL 5648 SCL 5636 CL 7260 & Pallet Burner * Measurement (G) includes a standard 96" Chimney. Furnace Measurements A B C D E F G H 47" 80" 57" 54" 58" 69" *149" 5" 59" 95" 69" 69" 70" 8 *16 5" 47" 80" 69" 54" 70" 8 *149" 5" 70" 99" 88" 82" 9 104" *164" 5" Printed in USA 2004 Central Boiler, Inc. 2 For your closest dealer, contact us at centralboiler.com, hydrofire.com, or call 1-800-248-4681 May 2004
TABLE OF CONTENTS DIMENSIONS AND MEASUREMENTS... 2 ALPHABETICAL INDEX... 3 TABLE OF CONTENTS... 3 WATER TO AIR HEAT EXCHANGER PRODUCTS ------------------------------------------------------------- 4 WATER TO AIR HEAT EXCHANGER PRODUCTS & PUMPS ----------------------------------------------- 5 PUMP ACCESSORIES, PEX TUBE, FITTINGS AND RELATED--------------------------------------------- 6 INSULATION, MANIFOLDS & WATER TO WATER HEAT EXCHANGERS -------------------------------- 7 SOLDERING MATERIALS, BUSHINGS, NIPPLES, UNIONS & PLUGS ----------------------------------- 8 ELBOWS, VALVES, MANIFOLDS, STRAINER, 1 1/4 PEX/FITTINGS ------------------------------------ 9 STATS, ZONE VALVES, CONTROLS & BASEBOARD ACCESSORIES --------------------------------- 10 BASEBOARD ACCESSORIES & SWEAT FITTINGS ---------------------------------------------------------- 11 MAINTENANCE PRODUCTS & ACCESSORIES ----------------------------------------------------------- 12-13 ACCESSORIES, MAINTENANCE PARTS & ELECTRICAL -------------------------------------------------- 14 NUMERICAL PARTS INDEX ------------------------------------------------------------------------------------------ 15 DEFINITIONS & COLOR CODES------------------------------------------------------------------------------------ 16 SYSTEM DIAGRAMS ---------------------------------------------------------------------------------------------- 17-22 SAMPLE PARTS LIST & ORDER LIST ---------------------------------------------------------------------------- 23 24 Volt Thermostat 10 24 Volt Transformer 10 2-Way Zone Valve 10 3 Way Valve, ¾ FIP 9 3-Way Zone Valve 10 Street Elbow 9 Adjustable Aquastat 10 Air Handler Cabinet 5 Anti-Scald Mixing Valve 10 Ash Rake 12 Ash Shovel 12 Ashtrol, 6.25 lbs 12 Automatic Vent Valve, 1/8" NPT 8 Ball Valve 9 Baseboard Joiner 10 Black Silicone, High Temperature 13 Blower & Motor 4 Brass 90 Street Elbow, ¾ 9 Brass Ball Valve, ¾, C x C 11 Brass Coupling, 1¼ Barb x Barb 9 Brass Elbow, 1¼ Barb x Barb 9 Brass Hex Bushing 8 Brass Male Adapter, 1¼ Barb x MIP 9 Brass Pipe Union 8 Bronze Pump 5 Cabinet 4 Cartridge 9 Central PEX ½ Tube 6 Central Therm Insulation 7 Central Therm Sleeve 7 CentralFlex 7 Chimney Kit 12 Cleaning Brush 8 Clip 13 Complete Baseboard 11 Contact Block 14 Copper Cap 11 Corrosion Inhibitor 12 Coupling 11 Crimp Tool 6 CSU Fan Convector 5 Decoiler 12 Digital Temperature Controller 14 Door Lock Kit 13 Door Seal Kit 13 Door Seal Rope 13 Double Wall Side-Arm Heat Exchanger 7 Draft Inducer 13 Drain Coupling, ¾, C x C 11 Elbow 11 Elbow, ¼ 13 End Cap 7 End Caps 11 ALPHABETICAL INDEX Fan 4 Fan Blades 4 Fan Center Relay 14 Female Adapter 11 Female Adapter 7 Fin Comb 14 Fittings Kit 8 Fixed Aquastat, 185 10 FlatPlate Heat Exchanger 7 FlatPlate Mounting Bracket 7 Floor Hydronic Heater 5 Flux (6 oz.) 8 Fuse Holder 14 Fuses 14 Fuse, 5 amp 13 Grounding Rod Kit 14 Heat Exchanger Coils 4 Heat Exchanger, Shell & Tube 7 Hex Bushing 8 High Limit Switch/Snap Disc 13 Hoe 12 Hose Bib, ¾ 8 Hose Clamp, 6 Hot Filter & Cartridge, ¾ FIP 9 Inner Pipe (Stainless) 12 Inside Corner 11 Insulation, 30"x 4' 12 Isolation Flange Kit, ¾ 6 Kickspace Hydronic Heater 5 LED Temperature Display 14 Lens 14 Light Bulb 14 Light Switch 13 Line Voltage Thermostat, 110 Volt 10 Linkage 13 Litmus Paper 12 Louvers 4 Male Adapter, ¾ x ¾, C x MIP 11 Manifold 9 Manifold w/o Valves 7 Manifold w/valves 7 Motor 4 Motor Frame 4 Nipple 8 Offset Tee 8 O-Ring 6 Outer Pipe (Galvanized) 12 Outlet Conversion Receptacle 14 Outside Corner 11 Permanganate 12 PEX Adapter 6 PEX Coupling 6 PEX Crimp Ring 6 PEX Elbow 6 PEX Hanger 7 PEX Steel Clamp (crimp ring) 6 PEX Tee 6 PEX Tube Cutter 6 PEX Tube 9 Photoelectric Eye 14 Pipe Plug 8 Pipe Plug Wrench Set 8 Plenum 5 Plug-in Thermostat, 110 Volt 10 Pool Aquastat 10 Power Inverter 14 Power Supply Cord, 32" 14 Pump Flange Kit 6 Ratchet Crimp Tool, ½, 6 Recessed Wall Hydronic Heater 5 Reducer, FTG x ¾ C 11 Reducing Elbow, x ¾, C x C 11 Reducing Tee, 1½ x x, C x C x C 11 Replacement Cartridges 6 Replacement Kit 12 Rocker Switches 14 Selector Switch 14 Side Arm Heat Exchanger, 40" 8 Sleeve Dispenser 7 Sludge Conditioner, 1 Gal. 12 Socket, 5A 13 Solder 8 Solenoid 13 Spark Arrestor 12 Stainless Steel Reducer 12 Stainless Chimney 12 Street Elbow, FTG x C 11 Sulfuric Acid 12 Swing Check Valve 9 Taco Pumps 5 Tee 11 Temp Gauge 13 Temperature Sensing Wire 14 Tempering Valve 10 Tile Tape 13 Time Delay Relay 14 Transformer 14 Transition 4 Tube, 5/16" 13 Valve, ¼ 13 Vent Cap 13 Vent Elbow 11 Wall Mount Hydronic Heater 5 Water Test Kit 12 Well, ½ NPT 10 Y-Strainer 9 Zone Valve Replacement Head 10 May 2004 For your closest dealer, contact us at centralboiler.com, hydrofire.com, or call 1-800-248-4681 3 3
Heat Exchanger Coil (50k BTU) WATER TO AIR HEAT EXCHANGER PRODUCTS Heat Exchanger Coil (140k BTU) Suspended Space Heater 220,000 BTU 287 D012900 172.86 50k BTU Water to air heat exchanger coil-12¾x14x4 1/8". 90º, FPT outlets. Heat Exchanger Coil (80k BTU) 109 D014490 192.72 80k BTU Water to air heat exchanger coil-12¾x18x4 1/8". Used in forced air furnaces with plenum sizes of approx. 13"x 18". FPT outlets. Heat Exchanger Coil (100k BTU) 106 D016212 218.86 100k BTU 102 D016086 217.16 95k BTU Water to air heat exchanger coils-( 106=16½x19x4 1/8"; 102=15x18x4 1/ 8"). Used with forced air furnaces with plenum sizes of approx. 17" x 18"and 15 x 18. FPT outlets. Heat Exchanger Coil (125k BTU) 107 704 Fittings 107 D017832 246.08 Straight 704 D018152 250.50 90 degree Water to air heat exchanger coil-17¾x20x4 1/8". Used with forced air furnaces with plenum sizes of approx. 18" x 18" to 18" x 20". FPT outlets. 108 D0204.29 275.79 140k BTU Water to air heat exchanger coil-19x21x4 1/8". Used with forced air furnaces with plenum sizes of approx. 20" x 20". FPT outlets. Heat Exchanger Coil (185k BTU) 110 D023572 320.58 185k BTU Water to air heat exchanger coil-22¾x24x4 1/ 8". Used with forced air furnaces with plenum sizes of approx. 23" x 23". FPT outlets. Heat Exchanger Coil (220k BTU) 111 D028328 376.76 220k BTU Water to air heat exchanger coil- 24x26x4 1/ 8". Used with forced air furnaces with plenum sizes of approx. 24" x 24". FPT outlets. Suspended Space Heater 100,000 BTU 322 323 106 1280 111 851 849 848 111 D028328 376.76 Exchanger Coil 849 D002606 37.53 Transition 848 D006834 101.14 Motor Frame 851 D002265 32.62 Fan Blades 1280 D011505 164.52 Motor Complete suspended space heater. 220,000 BTU 24" heat exchanger coil, bladed fan, transition, and motor. Some assembly required. Blower & Motor 203 D007910 126.56 1/8 HP 154 D016060 229.66 ¼ HP 208 D036342 472.45 1 HP 1/8 HP, ¼ HP, and 1 HP furnace blower and motor. Louvers 355 D002100 30.03 fits 106 354 D002100 35.91 fits 108 353 D002107 42.14 fits 111 Bolts onto the face of heat exchanger to direct heat downward. Space Heater Cabinet (50k BTU) 287 321 203 Correct Installation The outlet fitting must be located above the inlet fitting. Outlet Heat Exchanger Outlet Inlet Incorrect Installation Heat Exchanger Fittings Up Heat Exchanger Fittings Down 322 D010038 144.55 Fan 323 D002601 37.45 Cabinet 106 D016212 218.86 100k BTU Complete suspended space heater. 100,000 BTU heat exchanger coil, fan, and motor. Some assembly required. 321 D007509 150.18 Cabinet 287 D012900 172.86 Exchanger Coil 203 D0079.10 126.56 Blower & Motor Blower and heat exchanger coil sold separately. Accepts heat exchanger coil 287 and blower 203. Some assembly required. 4 For your closest dealer, contact us at centralboiler.com, hydrofire.com, or call 1-800-248-4681 May 2004
WATER TO AIR HEAT EXCHANGER PRODUCTS & PUMPS Space Heater 140,000 BTU 108 415 154 415 D004809 69.73 Plenum 154 D016060 229.66 Blower & Motor 108 D020429 275.79 Exchanger Coil Space heater with transitional plenum for ¼ HP fan to 140,000 BTU heat exchanger coil. Fan and heat exchanger coil are sold separately. Some assembly required. Air Handler Cabinet 301 D018525 257.50 100k-140k BTU 303 D021545 295.17 185k-220k BTU Blower and heat exchanger coil sold separately. Cabinet 301 (36x20x23 in.) accepts heat exchanger coil 106, 107, or 108 & uses ¼ hp blower 154. Cabinet 303 (39x25x28 in.) accepts heat exchanger coil 110 or 111 & uses 1 hp blower 208. Door is capable of holding a filter. Filter not included. Some assembly required. If utilizing an existing 24 volt thermostat to control these blowers, a Fan Center Relay ( 515) must be used. Wall Mount Hydronic Heater Wall Mount Hydronic Heater 14 1/4 in. 20 5/8 in. depth 5 in. 6777 D030672 426.00 Myson Hi-Line HL 7-4 wall mount, fanforced, hydronic heater. 3,665-5,155 BTU/hr Recessed Wall Hydronic Heater 19 1/8 in. 16 1/2 in. 17 3/4 in. Wall Opening 14 1/2 in. 3 5/8 in. 6774 D026494 368.00 Myson Whispa II Recessed Wall 5000 fanforced, hydronic heater. 4,225-5,305 BTU/hr Floor Hydronic Heater 9 3/4 in. 15 7/8 in. 14 1/4 in. 9 7/16 in. 8 1/4 in. 6775 D029952 416.00 Myson Whispa II Recessed Floor fanforced, hydronic heater. 4,720-6,010 BTU/hr Wall Mount Hydronic Heater Kickspace Hydronic Heater 3 1/2 in. 16 1/4 in. 7 1/2 in. 3 in. 14 in. 6771 D011664 162.00 Myson Whispa 50 Kickspace fan-forced, hydronic heater. 2,760-3,165 BTU/hr Kickspace Hydronic Heater 4 in. 18 1/2 in. 12 1/8 in. 3 1/2 in. 14 1/4 in. 6772 D017350 241.00 Myson Whispa II Kickspace 5000 fanforced, hydronic heater. Comes with hose kit. 4,730-6,185 BTU/hr 007 Series Taco Pumps 171 D005512 90.40 007 413 D008136 122.04 Priority Zoning 007 HP Amps Watts Max. Head-Volume 007 1/25 0.70 80.50 10 ft-20 GPM 007 Priority 1/25 0.70 81.65 10 ft-20 GPM Taco 007 Circulation Pump (requires flange kit). Includes O-rings. 009 & 011 Series Taco Pumps CIRCULATING TACO CARTRIDGE 20 3/16 in. 28 7/8 in. 18 1/2 in. 5 1/2 in. 6776 D038016 528.00 Myson Lo-Line LL 6-4 wall mount, fanforced, hydronic heater. 4,985-6,975 BTU/hr Wall Mount Hydronic Heater 15 9/16 in. 6 11/16 in. 31 7/8 in. 13 1/4 in. 4 3/4 in. 6779 D035064 487.00 Myson CSU 15M fan-forced, hydronic heater (optional legs included). 7,315-10,330 BTU/hr 4 in. Kickspace Hydronic Heater 3 1/2 in. 16 in. 173 D010075 164.84 009 218 D012531 215.53 011 HP Amps Watts Max. Head-Volume 009 1/8 1.4 161 34 ft-8 GPM 011 1/8 1.76 230 30 ft-28 GPM Taco 009 and 011 pumps both require flange kits. Includes O-rings. Bronze Pump 6778 D054288 754.00 Myson Slim-Line SL 16 wall mount, fanforced, hydronic heater. 11,880-15,290 BTU/hr 22 1/2 in. 17 3/4 in. 6773 D019656 273.00 Myson Whispa II Kickspace 9000 fanforced, hydronic heater. 9,055-10,875 BTU/hr 175 D008028 120.42 006 HP Amps WattsMax. Head-Volume 006 1/40 0.52 59.8 9 ft-10 GPM Taco 006 Circulation Pump for domestic water systems ( Sweat, no flange required). May 2004 For your closest dealer, contact us at centralboiler.com, hydrofire.com, or call 1-800-248-4681 CIRCULATING TACO CARTRIDGE 5
PUMP ACCESSORIES, PEX TUBE, FITTINGS AND RELATED Isolation Flange Kit Central PEX Tube (Oxygen Barrier) PEX Tee 223 D002088 31.53 Isolation Pump Flange (valved flange body). Includes (2) flanges, nuts and bolts. Full port. Pump Flange Kit 1320 D010532 144.29 x 300' 1321 D017554 240.49 x 500' 1322 D035108 480.98 x 1000' High density oxygen barrier x-link tube. Excellent for radiant floor heating. Rated for 185º at 100 psi. Central PEX Tube 1338 D000150 2.70 1332 D000300 4.80 Tee for CENTRAL PEX. 145 Crimp Tool 324 119 D000651 8.98 194 D000651 8.98 1272 D000955 14.90 1¼" Set of 2 FIP pump flanges. One set used with each pump. ( 119 is used in most installations). O-Rings 532 D000240 Set of 2 replacement flange O-Rings. Replacement Cartridges 1311 D007506 108.09 x 100' 1312 D015012 216.17 x 200' 1313 D022518 324.26 x 300' 1314 D037530 540.43 x 500' High density x-link tube. Rated for 185º at 100 psi. PEX Adapter 1337 D000075 1.20 PEX x C 1331 D000201 4.22 PEX x C Crimp adapter allows you to adapt copper pipe to CENTRAL PEX. PEX Adapter 324 D012828 174.46 145 D023183 361.65 Crimp tools for crimping rings ( & ) to connect crimp fittings to PEX tube. PEX Crimp Ring 1342 D000013 0.23 1335 D000019 0.30 and crimp rings for CENTRAL PEX. Hose Clamp For 006, 007, and 012 Pumps For 009 & 011 Pumps 222 D004039 59.37 006 170 D003039 46.50 007 172 D005210 72.42 009 219 D007540 120.64 011 221 D008776 132.52 012 Replacement cartridges for Taco 006, 007, 009, 011, and 012 pumps (3 year warranty). PEX Tube Cutter 1341 D000175 2.70 PEX x MIP 1336 D000175 2.70 PEX x MIP 1330 D000201 4.22 PEX x MIP 1324 D000214 4.49 PEX x MIP Crimp adapter allows you to adapt threaded pipe to CENTRAL PEX. PEX Coupling 1339 D000100 1.80 1333 D000200 4.20 Couple two CENTRAL PEX tube ends together. PEX Elbow 5978 D000075 1.20 stainless steel hose clamp. Ratchet Crimp Tool 5925 D009314 132.26 & Tool crimps steel clamps ( & ) to connect crimp fittings to PEX tube. PEX Steel Clamp (crimp ring) 195 D001501 24.02 Tool for cutting PEX tube up to size. 1340 D000100 1.80 1334 D000250 4.50 90º elbow for CENTRAL PEX. 5927 D000018 0.27 5926 D000033 0.45 and steel clamps for CENTRAL PEX. Must use crimp tool 5925. 6 For your closest dealer, contact us at centralboiler.com, hydrofire.com, or call 1-800-248-4681 May 2004
INSULATION, MANIFOLDS & WATER TO WATER HEAT EXCHANGERS 2 3/8 in. CentralFlex 7 in. 244 D085500 1265.40 100 249 D427500 6327.00 500 CentralFlex makes the installation quick and easy. Two Central PEX tubes encased by multi-layer insulation and waterproof jacket. End Cap Manifold w/valves (for ½ " PEX) 376 164 1329 1349 1349 D002302 36.14 2 Loop 1329 D003007 46.61 3 Loop 376 D000075 1.20 Copper Cap copper (sweat) manifold with ½ " barbed valves; 2 or 3 loop. For radiant installations. Manifold w/o Valves (for ½ " PEX) 1885 FlatPlate Mounting Bracket 5807 D001003 13.04 Used to mount 5 x12 flat plate heat exchangers to a wall or similiar surface. Heat Exchanger, Shell & Tube 60 in. 248 D004500 72.00 CentralFlex end cap. Includes end cap, gaskets, and clamp for a waterproof seal. Central Therm Insulation 6.52.5 241, 242 2" Wall Thickness Length 241 D002075 36.31 8' 242 D001011 17.69 4' Closed cell, green polyethylene CENTRAL THERM insulation (used to insulate water lines) comes in either 4 ft or 8 ft lengths. Central Therm Sleeve 524 D004005 72.09 100 525 D008033 144.59 200 526 D012003 216.05 300 527 D020002 360.04 500 672 D030069 577.32 800 Central Therm Sleeve increases efficiency, especially in the Spring when ground water is high. Slips over Central Therm Insulation. Sleeve Dispenser 506 D003001 48.02 Handy dispenser holds all roll lengths of Central Therm Sleeve. PEX Hanger 293 D000010 0.14 295 D000016 0.26 Half moon, nail in pex tube hanger. 1880 1880 D001504 26.47 2 Loop 1885 D001803 31.19 3 Loop copper (sweat) manifold with ½ " barbed fittings; 2 or 3 loop. Used in radiant floor installations, does not come with valves or caps. Female Adapter 6679 D000075 1.20 Barb x C Adapter allows you to adapt copper pipe to high density Central PEX tube. Sweat end fits over copper pipe. FlatPlate Heat Exchanger FP Units are 316L Stainless, copper brazed. MPN Units are Marine grade Stainless, nickel brazed (for pools and hot tubs). Ports 5734 D010846 161.61 3/4 in. FP5x12L-6 5735 D021563 351.48 1 in. FP5x12L-16 5736 D026318 421.09 1 in. FP5x12L-24 5744 D027269 436.30 1¼ in. FP5x12L-30 5747 D053176 829.55 1¼ in. FP5x12L-40 5738 D037397 579.65 1 in. MPN5x12-10 5737 D043481 682.65 1 in. MPN5x12-16 5814 D051923 810.00 1¼ in. MPN5x12-20 5842 D059691 931.18 1¼ in. MPN5x12-24 5769 D083000 1295.14 1¼ in. MPN5x12-30 Style 6677 D005292 87.32Threaded Fittings Kit* 6678 D005331 91.69 Sweat Fittings Kit* Compact, high-performance, water to water, continuous flow heat exchanger (MPT ports). * Fittings Kit for domestic water heater using the FlatPlate ( 5734) exchanger. Heat always travels from warmer to cooler materials regardless of what mode of heat transfer carries it. 151 D027571 416.32 60" Water to water, continuous flow heat exchanger. ( FIP side ports & 1 FIP end port). For boiler, pool or other high volume water heating. Heat Exchanger, Shell & Tube 27 in. 148 D018265 301.37 27" Water to water, continuous flow heat exchanger. ( FIP side port & 1 FIP end ports). For hot tub and commercial water heater applications. Heat Exchanger, Shell & Tube 48 in. 177 D042150 657.54 48" Water to water heat exchanger. ( FIP side port, 1 FIP end ports). Use with existing boiler or for swimming pools, etc. Double Wall Side-Arm Heat Exchanger 47" 42" 318 D010509 156.58 42" Water to water, domestic, double wall, sidearm heat exchanger with ¾ in. C ports. Install on existing water heater for thermal circulating heat transfer. May 2004 For your closest dealer, contact us at centralboiler.com, hydrofire.com, or call 1-800-248-4681 7
SOLDERING MATERIALS, BUSHINGS, NIPPLES, UNIONS & PLUGS Side Arm Heat Exchanger Hex Bushing Hose Bib 116 199 116 117 117 255 200 372 116 = Copper Tubing Is Not Included In Kit. Approximately (3) feet of 3/4" 40 in. copper tubing is needed to assemble the kit. 116 255 591 118 1330 116 133 199 255 Optional Copper Sweat Fittings (not included in kit) 116 1330 117 591 D009504 150.16 40" 2053 D003553 56.14 Fittings Kit 40" water-to-water, domestic water heater kit. FIP side and end ports. Install on existing water heater for thermal circulating transfer. Automatic Vent Valve 286 D001105 17.02 1/8" NPT Automatically vents air (used in pressurized systems only). Solder & Soldering Flux 1325 D000502 7.23 Solder 100 D000502 7.53 Flux (6 oz.) Low melting point solder for easier soldering. Soldering flux includes brush. Use for easier soldering of copper sweat fittings. Cleaning Brush 388 D000176 3.01 1¼" x 105 D000200 3.60 1½ x 412 D000250 3.90 1¼" x 335 D000375 5.85 2" x 325 D000177 3.19 x 180 D000100 1.50 x 1/8" 408 D000225 3.31 1 x 1¼" NPT bushing. Brass Hex Bushing 385 D000601 9.62 1 x 3851 D000400 5.72 1¼" x Brass NPT reducing bushing. Nipple 118 D000053 1.27 x Close 409 D000200 3.00 1¼" x Close 314 D000150 2.40 1 x Close 505 D000501 7.21 Brass 1 x Close 533 D000100 1.80 ¾ x 2" 534 D000301 4.52 ¾ x 7" 535 D000300 3.99 Brass ¾ x 2" MPT extra heavy nipples ( 118 is used by pumps and ball valves). Brass fittings must be used on stainless steel furnaces. Brass Pipe Union 199 D000502 7.23 MPT hose bib. (brass) Tee 133 D000200 3.24 NPT 3850 D000216 3.48 NPT (brass) 133 is a black iron pipe NPT tee that can be used for vent option near pump. 3850 is a brass NPT tee that can be used in domestic water situations. 3/4" MPT Offset Tee (4 in.) 3/4" MPT 1/2" FPT 6727 D000755 12.00 Brass Can be used in conjuction with temp gauge ( 174) for monitoring furnace supply water temperature or may be used instead of 533 & 274 on supply and/or return bung. Pipe Plug 331 D000038 0.60 336 D000150 2.33 1 383 D000175 2.77 1¼" 6557 D000090 1.45 Brass MPT pipe plug. (black iron pipe unless noted) Pipe Plug Wrench Set End For End Large End For Large Plug 378 D000226 4.52 379 D000275 5.09 Brush for cleaning the inside of copper fittings. 5907 D000399 8.06 5908 D000523 9.78 5909 D000880 16.46 1¼" FIP brass pipe union, suggested for use with FlatPlate heat exchanger installation. Small End For Small Plug 5459 D002000 30.00 Used to remove 1 1/4" and 3/4" pipe plugs from furnaces. Does not fit 1 1/2" pipe plugs. 8 For your closest dealer, contact us at centralboiler.com, hydrofire.com, or call 1-800-248-4681 May 2004
ELBOWS, VALVES, MANIFOLDS, STRAINER, 1 1/4 PEX/FITTINGS 45 Street Elbow Manifold Brass Male Adapter 124 D000175 2.70 NPT 45 street elbow. (black iron pipe) 90 Street Elbow 411 D000298 5.72 1¼" 274 D000155 2.99 126 D000225 2.99 Brass 90 street elbow. (black iron pipe unless noted) Ball Valve 186 D000401 7.82 198 D000501 7.21 410 D001502 22.53 1¼" FIP ball valve ( 198 used on both sides of pump and on the furnace for each water line). (brass) 3 Way Valve 330 D002207 32.44 FIP FIP, manually operated 3-way valve. (brass) Swing Check Valve 296 D000452 6.01 FIP 5871 D001206 17.13 1 1/4" FIP Swing check valve (prevents reverse circulation). FIP fittings. (brass) CENTRAL BOILER 407 D001652 22.80 Manifold 1 FIP inlet; four FIP outlets. Manifold 395 D008029 122.04 1 ¼" x FIP Two 1 ¼" and six FIP (for large building system) manifold. 3" x 3" x 33.5" Y-Strainer 1695 D001501 21.61 573 D002003 30.05.20 mesh, or FIP brass Y-strainer. Recommended to be used when installing Central Plate heat exchangers. Hot Filter & Cartridge IN IN OUT OUT 101 Both 202 101 D007728 105.10 FIP 202 D000702 14.46 Cartridge #10 hot filter with cartridge ( FIP fittings). The one who says it cannot be done should never interrupt the one doing it. 380 D000828 13.25 1¼" Barb x MIP 1¼" brass barb x MIP male adapter for 1¼" PEX tube. Brass Coupling 381 D000790 12.01 1¼" Barb x Barb 1¼" brass barb x barb coupling for 1¼" PEX tube. Brass Elbow 382 D001173 15.72 1¼" Barb x Barb 1¼" brass barb x barb elbow for 1¼" PEX tube. 1¼" PEX Tube 5971 D028774 399.96 1¼" x 164' 5972 D057548 794.16 1¼" x 328' High density oxygen barrier x-link tube. Rated for 185º at 100 psi. Each length should be insulated separately as two will not fit inside Central Therm insulation. Always install pump in the hot supply line with the arrow pointing away from the outdoor wood furnace and toward the building being heated. Ability is what you are capable of doing...motivation determines what you do...attitude determines how well you do it! May 2004 For your closest dealer, contact us at centralboiler.com, hydrofire.com, or call 1-800-248-4681 9
STATS, ZONE VALVES, CONTROLS & BASEBOARD ACCESSORIES Line Voltage Thermostat Tempering Valve Adjustable Aquastat 160 D001524 24.38 110 Volt 110 volt line voltage thermostat (used to start fan on forced air systems). 24 Volt Thermostat 189 D001973 31.17 24 Volt 24 volt thermostat used to operate 24 volt 3- way zone valves (requires 24 volt transformer). Can operate fan may also be used with a forced air system as a secondary thermostat. 24 Volt Transformer 188 D001342 22.81 24 Volt 24 volt transformer (used with 24 volt wall thermostat and 24 volt zone valves). 3-Way Zone Valve 113 114 D009248 145.19 Sweat 127 D008036 114.91 Sweat 113 D004562 71.17 Replacement Head 24-volt 3-way zone sweat valve. Used to bypass water for radiant floor heat, baseboard heat, swimming pool heaters, etc. (requires 24 volt transformer). 2-Way Zone Valve 113 163 D002835 40.82 Sweat 140 D003725 67.05 Sweat Mixing valve for tempering hot water. Adjustable range 120-160 F ( or sweat fittings). Anti-Scald Mixing Valve 306 D006037 90.56 NPT 309 D006433 93.92 NPT 307 D007671 119.67 NPT Anti-Scald mixing valve, tempering control valve, for controlling water temperature in radiant floor heat (temperature range 110-145 F) or reducing domestic hot water temperature. Plug-in Thermostat 368 D004221 75.98 110 Volt 110 volt plug-in thermostat (operates fan; 13.5 amp rated). Pool Aquastat & Well 191 Well 1247 WHITE-RODGERS 169 D005526 84.55 Immersible, adjustable (110-240 F) aquastat with MPT fitting on well (either close on rise or open on rise). Recommended operating setting between 165 and 195 F. Adjustable Aquastat WHITE-RODGERS 204 D006573 98.60 Surface mount 100 F to 240 F adjustable aquastat (for 1992 or older model Classic Furnaces). Fixed Aquastat, 185 290 D004018 60.27 Immersible, non-adjustable aquastat ( MPT fitting). Baseboard Joiner 230 D000500 8.00 Baseboard joint cover for joining continuous lengths of baseboard. 571 D005644 84.66 Sweat 671 D006018 87.86 Sweat 113 D004562 71.17 Replacement Head 24-volt 2-way zone sweat valve (requires 24 volt transformer). 191 D006508 102.18 1247 D000667 8.00 NPT Immersible aquastat, 40 F to 180 F range. 1º differential, for controlling water temperature in pools, spas, etc. ( NPT fitting). Well sold separately. Radiant heating is a process by which energy leaves the surface of an object and travels to the surface of a cooler object in the form of electromagnetic waves. 10 For your closest dealer, contact us at centralboiler.com, hydrofire.com, or call 1-800-248-4681 May 2004
BASEBOARD ACCESSORIES & SWEAT FITTINGS Complete Baseboard Coupling Vent Elbow 234 D001254 18.06 2' 235 D001782 25.84 3' 236 D002312 33.76 4' 237 D002840 41.75 5' 238 D003363 49.44 6' Baseboard (heating element and cover). 550 BTU/ft @ 180 water temperature. 4 GPM flow rate. copper sweat fittings. End caps and corners sold separately. End Caps 232 D000501 7.82 Left 233 D000501 7.82 Right Left and right hand caps for radiant baseboard heater covers. Inside Corner Description 146 D000075 1.20, C x C 147 D000100 1.50, C x C Sweat to sweat copper coupling. Male Adapter Description 116 D000125 1.90 x, C x MIP MPT to, thread to sweat copper pipe adapter. Female Adapter Description 164 D000327 4.51 x, C x FIP 117 D000150 2.40 x, C x FIP Sweat to thread copper pipe adapter. Tee Description 372 D000301 4.21, C x C 112 D000569 8.08, C x C Vent elbow, sweat to sweat copper fitting. Drain Coupling Description 373 D000350 4.80, C x C Sweat to sweat copper drain coupling. Reducer Description 231 D000250 4.50 FTG x C x sweat x sweat copper reducer. Reducing Elbow 182 D000503 7.85 Inside corner cover for baseboard water heater. Outside Corner Description 138 D000300 4.80, C x C x C 255 D000150 2.40 C x C x C Sweat x sweat x sweat copper tee. Reducing Tee Description 123 D000251 4.52 x, C x C 90 reducing copper elbow. Sweat x sweat, both female. Elbow 183 D000615 9.23 Outside corner cover for baseboard water heater. Street Elbow, Description 178 D001077 13.79 1x x, C x C x C 1 x x sweat x sweat x sweat copper tee. Copper Cap Description 276 D000085 1.36, C x C 277 D000150 2.00, C x C 90 copper elbow. Sweat x sweat, both female. Brass Ball Valve Description 103 D000201 3.02 FTG x C 90 street elbow, female sweat x male sweat copper fitting. Description 376 D000075 1.20, C Sweat copper end cap. Description 200 D000500 7.50, C x C sweat x sweat ball valve. May 2004 For your closest dealer, contact us at centralboiler.com, hydrofire.com, or call 1-800-248-4681 11
EMERGENCY PHONE NUMBER (612) 338-7266 (800) 255--3924 ROUTE 1, P.O. BOX 80, GREEN 1 2 3 4 TO DATE OPEN Hoe 308 D001252 18.03 Firebox maintenance tool with metal handle. Ash Shovel 299 D001504 24.06 Shovel used for removing ashes from furnace. Ash Rake 300 D002506 40.85 Long metal handle ash rake used to pull coals forward and stir ashes. Ashtrol MAINTENANCE PRODUCTS & ACCESSORIES Sludge Conditioner CENTRAL BOILER PUSH DOWN & TURN CLOSE TIGHTLY BWT-2741 166 D001802 26.49 1 Gal. Sludge conditioner reduces mineral deposits in water-to-water heat exchangers. HF 36 uses ½ gal.; CL 4436, CL 5648, HF 48, & HF 60 use 1 gal.; CL 7260 & Pallet Burner use 2 gal. Water Test Kits COMPONENTS: INSTRUCTIONS PROCEDURE: 405 D001603 19.24 Complete Kit 153 D000054 0.85 Litmus Paper* 403 D000345 5.38 Permanganate* 404 D000295 4.60 Sulfuric Acid* 597 D003497 41.96 Complete Kit** Water test kits (ph test strip included). * Replacement items ** Anti-freeze compatible Decoiler Chimney Extension Extension Kits 142/141 883/878 (outer pipe) 2480/2481SS (reducer) 895/898 (inner pipe) 841/841 (insulation) Stainless Steel Reducer 2480* D001501 24.02 10"x 8"SS 2481** D002030 35.93 12"x 10"SS Inner Pipe (Stainless) 895* D003181 50.90 8"x 4' 898** D003940 63.04 10"x 4' Outer Pipe (Galvanized) 883* D000931 14.90 10"x 4' 878** D001050 16.80 12"x 4' Insulation (* one piece per section; ** two pieces per section) 841 D000527 8.43 30"x 4' Chimney Kit 142* D004621 73.94 8"x 4' Kit 141** D005961 112.07 10"x4' Kit Replacement Kit (Includes weld-on ring) 391 D007377 120.98 Replacement Kit * CL 4436, CL 5648, & all HF models **Pallet Burner and CL 7260 models Chimney extension kits. Attach to existing chimney then assemble cover. 2480 & 2481 are stainless steel. Two sections of insulation ( 841) will be needed for each section of large diameter pipe. Spark Arrestor ASH TROL-MC 297 D001258 24.15 6.25 lbs Furnace firebox ph modifier. Corrosion Inhibitor 1323 D023202 348.03 Tube uncoiling reel. Useful when installing ½ tubing. Stainless Chimney 6724 396 D005500 85.00 Stainless steel spark arrestor for new style chimney ( 6724). Spark Arrestor P/N 165 CENTRAL SHAKE WELL BEFORE U 165 D001803 26.50 Corrosion inhibitor for water jacket. HF 36, HF 48, & CL 4436 use 1 unit, SCL 5636 use 1½ units; CL 5648, SCL 5648, & HF 60 use 2 units; CL 7260 & Pallet Burner use 4 units. 6725 Description 6724 D011500 184.00 4 Extension 6725 D014000 225.00 Tee Type HT listed, factory built all stainless steel chimney sections and tee. Sections are 4 feet long. 392 D003715 61.67 8" 393 D004027 64.83 10" Stainless steel, expanded metal spark arrestor ( 392 is for the CL 4436 & CL 5648; 393 is for the CL 7260 & Pallet Burner). Radiation only becomes heat when absorbed by a material. 12 For your closest dealer, contact us at centralboiler.com, hydrofire.com, or call 1-800-248-4681 May 2004
CENTRA L Temp Gauge MAINTENANCE PRODUCTS & ACCESSORIES Door Seal Kit 167 Solenoid 443 174 D002002 31.23 In-line, dial temperature gauge (MPT). Optional for manifolds, pool heater systems, etc. Vent Cap BOI LER LER 320 D000283 6.79 Replacement vent cap. Helps prevent water loss through the vent pipe. Sight Gauge Components 812 808 846 880 812 D000100 1.55 5/16" tube 808 D000006 0.10 Clip 846 D000752 11.73 ¼" Valve 880 D000150 2.34 ¼" Elbow Transparent tube for sight gauge, plastic clips, or water level valve. Black Silicone, High Temperature 806 D000401 6.02 10.1 oz. 100% silicone adhesive. Door Seal Rope Application 809 D000100 1.56 (price/ft) 359 D000802 14.44 CL 4436 & HF 48 (8 ) 360 D000902 14.07 CL 5648 & HF 60 (9 ) 338 D000130 2.03 (price/ft) 361 D001564 24.40 CL 7260 (12 ft) 367 D002997 46.75 Pallet Burner (23 ft) Sold by the foot or precut to proper lengths for each furnace (no silicone included). Application 362 D001200 18.48 CL 4436 & HF 48 363 D001303 20.07 CL 5648 & HF 60 364 D001962 30.41 CL 7260 365 D003800 58.90 Pallet Burner Fiberglass rope and black silicone adhesive. Door Lock Kit Application 5575D002017 30.26 Steel Door CL 7260 & PB 537 D002019 30.29 Other Cam Loc Models* Prevents unauthorized access to the firebox. * Including CL 7260 Cast Iron Door. Draft Inducer Application 400 D009520 141.85 Side Draft 500 D009564 142.50 Cast Door 700 D009499 141.54 Flat Front Door 6576 D011414 187.19 CL 7260 Door Bolts to existing draft hood (fan included). Must use 3 amp fuse. Linkage May 2004 For your closest dealer, contact us at centralboiler.com, hydrofire.com, or call 1-800-248-4681 1270 1266 Application 1266 D000150 2.10 All linkage Models 1270 D000331 4.63 Wire Loop Models Solenoid to damper control linkage. Each linkage comes complete with cotter pins. 1 5/8 in. 1 3/8 in. Application/Date 167 D002255 29.09 Pre 6/2000 443 D001527 20.16 After 6/2000 Damper control solenoid. Solenoids are not interchangeable. Solenoid ( 443) has a 1 3/8 center-to-center for the bracket holes. Solenoid ( 167) has a 1 5/8 center-tocenter for the bracket holes. Fuse & Socket 451 Buss TYPE AMP W 5 450 450 D000319 4.59 5A Fuse 451 D001072 19.30 5A Socket 5 amp fuse and 5 amp fuse socket. High Limit Switch/ Snap Disc Temperature 192 D000592 9.59 190 5977 D001500 19.00 150-200 5778 D001200 14.50 145-160 192 (opens on temperature rise). 5977 & 5778 are dual fuel replacement snap discs (5977 is the center disc). Light Switch 187 D000754 10.25 Includes cover plate and seal. Tile Tape 251 D000324 5.20 Recommended for taping CENTRAL THERM insulation joints. 13
1 3 5 7 9 ACCESSORIES, MAINTENANCE PARTS & ELECTRICAL Grounding Rod Kit Temperature Sensing Wire LED Temperature Display 1497 6593 D001176 21.05 Kit Used to electrically ground furnace. Power Inverter 457 D007505 99.07 Can be used to convert DC current from a 12V battery to AC 110 current. Used as a backup for 110 volt pump and/or furnace. Fuses & Fuse Holder 1085 D000451 6.63 Fuse Holder 1087 D000039 0.59 2 Amp 1089 D000039 0.59 3 Amp 6648 D000050 0.80 5 Amp 2, 3, & 5 amp fuses and fuse holder protect solenoid from overload. 5amp fuse is for dual fuel models. Time Delay Relay MINUTES 15 13 11 5775 D005071 63.39 Replacement relay for dual fuel furnaces. Digital Temperature Controller CENTRAL BOILER 5947 D009520 152.32 Replacement controller for furnaces. F out set up def down Description 725 D001503 24.05 Wire Replacement temperature sensing wire for furnaces with a digital temperature controller ( 5947). Rocker Switch 6501 6500 Light Switch Power Supply Function 6501 D000400 6.40 ON-OFF-ON 6500 D000400 6.40 ON-OFF Replacement switches for furnaces. Photoelectric Eye 5998 D001800 28.80 Replacement photoelectric eye for furnaces. Lens & Light Bulb 6510 14 For your closest dealer, contact us at centralboiler.com, hydrofire.com, or call 1-800-248-4681 May 2004 6509 Description 6510 D000601 9.62 Lens 6509 D000150 2.40 Light Bulb Replacement lens and light bulbs for furnaces. Contact Block 1 5 3 7 6497 D003809 60.94 Replacement contact block for dual fuel furnaces. Selector Switch 6498 D001003 16.05 Replacement selector switch for dual fuel furnaces. 1496 Yellow 1497 D004261 63.92 LED Display 1496 D000754 12.06 Transformer LED temperature display, requires 110 V to 12 V transformer ( 1496). Fan Center Relay 515 D001995 35.91 The relay is used to control a 110 V fan with a 24 V thermostat. Outlet Conversion Receptacle 582 D000400 6.00 Power Supply Cord 556 D000511 7.36 32" May be used to wire pumps when installed on furnaces. Comes with strain relief. Fin Comb 5918 D000597 8.54 Tool with 6 interchangeable heads for straightening fins on water to air heat exchangers, for all units with 8, 9, 10, 11, 12, and 14 fins per inch.
Description Page 100 Flux (6 oz.) 8 101 Hot Filter & Cartridge, ¾ FIP 9 102 Heat Exchanger Coil (95k BTU) 4 103 Street Elbow, FTG x C 11 105 Hex Bushing, 1½ x ¾ 8 106 Heat Exchanger Coil (100k BTU) 4 107 Heat Exchanger Coil (125k BTU) 4 108 Heat Exchanger Coil (140k BTU) 4 109 Heat Exchanger Coil (80k BTU) 4 110 Heat Exchanger Coil (185k BTU) 4 111 Heat Exchanger Coil (220k BTU) 4 112 Vent Elbow,, C x C 11 113 2-Way Zone Valve Replacement Head 10 114 3-Way Zone Valve, Sweat 10 116 Male Adapter, ¾ x ¾, C x MIP 11 117 Female Adapter, ¾ x ¾, C x FIP 11 118 Nipple, ¾ x Close 8 119 Pump Flange Kit, ¾ 6 123 Reducing Elbow, x ¾, C x C 11 124 45 Street Elbow, ¾ 9 126 Brass 90 Street Elbow, ¾ 9 127 3-Way Zone Valve, ¾ Sweat 10 133 Tee, ¾ NPT 8 138 Tee,, C x C x C 11 140 Tempering Valve, ¾ Sweat 10 141 Chimney Kit, 10"x4' Kit 12 142 Chimney Kit, 8"x 4' Kit 12 145 Crimp Tool, 6 146 Coupling, ¾, C x C 11 147 Coupling,, C x C 11 148 Heat Exchanger, Shell & Tube, 27" 7 151 Heat Exchanger, Shell & Tube, 60" 7 153 Litmus Paper 12 154 Blower & Motor, ¼ HP 4 160 Line Voltage Thermostat, 110 Volt 10 163 Tempering Valve, ½ Sweat 10 164 Female Adapter, x ¾, C x FIP 11 165 Corrosion Inhibitor 12 166 Sludge Conditioner, 1 Gal. 12 167 Solenoid (Pre 6/2000) 13 169 Adjustable Aquastat 10 170 Replacement Cartridge 007 6 171 007 Taco Pump 5 172 Replacement Cartridge 009 6 173 009 Taco Pump 5 174 Temp Gauge 13 175 Bronze Pump 5 177 Heat Exchanger, Shell & Tube, 48" 7 178 Reducing Tee, 1½ x x, C x C x C 11 180 Hex Bushing, ¾ x 1/8" 8 182 Inside Corner 11 183 Outside Corner 11 186 Ball Valve, ½ 9 187 Light Switch 13 188 24 Volt Transformer 10 189 24 Volt Thermostat 10 191 Pool Aquastat 10 192 High Limit Switch, 190 13 194 Pump Flange Kit, 6 195 PEX Tube Cutter 6 198 Ball Valve, ¾ 9 199 Hose Bib, ¾ 8 200 Brass Ball Valve, ¾, C x C 11 202 Cartridge 9 203 Blower & Motor, 1/8 HP 4 204 Adjustable Aquastat 10 208 Blower & Motor, 1 HP 4 218 011 Taco Pump 5 219 Replacement Cartridge 011 6 221 Replacement Cartridge 012 6 222 Replacement Cartridge 006 6 223 Isolation Flange Kit, ¾ 6 230 Baseboard Joiner 10 231 Reducer, FTG x ¾ C 11 232 End Caps, Left 11 233 End Caps, Right 11 234 Complete Baseboard, 2' 11 235 Complete Baseboard, 3' 11 236 Complete Baseboard, 4' 11 237 Complete Baseboard, 5' 11 238 Complete Baseboard, 6' 11 241 Central Therm Insulation, 8' 7 242 Central Therm Insulation, 4' 7 244 CentralFlex, 100 7 248 End Cap 7 249 CentralFlex, 500 7 251 Tile Tape 13 255 Tee, ¾ C x C x C 11 274 90 Street Elbow, ¾ 9 276 Elbow, ¾, C x C 11 277 Elbow,, C x C 11 286 Automatic Vent Valve, 1/8" NPT 8 287 Heat Exchanger Coil (50k BTU) 4 290 Fixed Aquastat, 185 10 293 PEX Hanger, ½ 7 295 PEX Hanger, 7 296 Swing Check Valve, ¾ FIP 9 297 Ashtrol, 6.25 lbs 12 NUMERICAL PARTS INDEX 299 Ash Shovel 12 300 Ash Rake 12 301 Air Handler Cabinet, 100k-140k BTU 5 303 Air Handler Cabinet, 185k-220k BTU 5 306 Anti-Scald Mixing Valve, ½ NPT 10 307 Anti-Scald Mixing Valve, NPT 10 308 Hoe 12 309 Anti-Scald Mixing Valve, ¾ NPT 10 314 Nipple, 1½ x Close 8 318 Double Wall Side-Arm Heat Exchanger 7 320 Vent Cap 13 321 Cabinet 4 322 Fan 4 323 Cabinet 4 324 Crimp Tool, ½ 6 325 Hex Bushing, ¾ x ½ 8 330 3 Way Valve, ¾ FIP 9 331 Pipe Plug. ¾ 8 335 Hex Bushing, 2" x ¾ 8 338 Door Seal Rope, (price/ft) 13 353 Louvers, fits 111 4 354 Louvers, fits 108 4 355 Louvers, fits 106 4 359 Door Seal Rope, CL-4436 & HF48 (8 ) 13 360 Door Seal Rope, CL-5648 & HF60 (9 ) 13 361 Door Seal Rope, CL-7260 (12 ft) 13 362 Door Seal Kit, CL-4436 & HF48 13 363 Door Seal Kit, CL-5648 & HF60 13 364 Door Seal Kit, CL-7260 13 365 Door Seal Kit, Pallet Burner 13 367 Door Seal Rope, Pallet Burner (23 ft) 13 368 Plug-in Thermostat, 110 Volt 10 372 Vent Elbow, ¾, C x C 11 373 Drain Coupling, ¾, C x C 11 376 Copper Cap,, C 11 378 Cleaning Brush, ¾ 8 379 Cleaning Brush, 8 380 Brass Male Adapter, 1¼ Barb x MIP 9 381 Brass Coupling, 1¼ Barb x Barb 9 382 Brass Elbow, 1¼ Barb x Barb 9 383 Pipe Plug, 1¼ 8 385 Brass Hex Bushing, 1½ x ¾ 8 388 Hex Bushing, 1¼ x ¾ 8 391 Replacement Kit 12 392 Spark Arrestor, 8" 12 393 Spark Arrestor, 10" 12 395 Manifold, 1 ¼ x ¾ FIP 9 396 Spark Arrestor 12 400 Draft Inducer, Side Draft 13 403 Permanganate 12 404 Sulfuric Acid 12 405 Water Test Kit 12 407 Manifold 9 408 Hex Bushing, 1½ x 1¼ 8 409 Nipple, 1¼ x Close 8 410 Ball Valve, 1¼ 9 411 90 Street Elbow, 1¼ 9 412 Hex Bushing, 1¼ x ½ 8 413 Priority Zoning 007 Taco Pump 5 415 Plenum 5 443 Solenoid (After 6/2000) 13 450 5A Fuse 13 451 5A Socket 13 457 Power Inverter 14 500 Draft Inducer, Cast Door Draft 13 505 Nipple, Brass 1½ x Close 8 506 Sleeve Dispenser 7 515 Fan Center Relay 14 524 Central Therm Sleeve, 100 7 525 Central Therm Sleeve, 200 7 526 Central Therm Sleeve, 300 7 527 Central Therm Sleeve, 500 7 532 O-Ring 6 533 Nipple, ¾ x 2" 8 534 Nipple, ¾ x 7" 8 535 Nipple, Brass ¾ x 2" 8 537 Door Lock Kit, Other Cam-Loc Models 13 556 Power Supply Cord, 32" 14 571 2-Way Zone Valve, ¾ Sweat 10 573 Y-Strainer, 9 582 Outlet Conversion Receptacle 14 591 Side Arm Heat Exchanger, 40" 8 597 Water Test Kits 12 671 2-Way Zone Valve, Sweat 10 672 Central Therm Sleeve, 800 7 700 Draft Inducer, Flat Front Door 13 704 Heat Exchanger Coil (125k BTU) 4 725 Temperature Sensing Wire 14 806 Black Silicone, High Temperature 13 808 Clip 13 809 Door Seal Rope, ¾ (price/ft) 13 812 5/16" tube 13 841 Insulation, 30"x 4' 12 846 ¼ Valve 13 848 Motor Frame 4 849 Transition 4 851 Fan Blades 4 878 Outer Pipe (Galvanized), 12"x 4' 12 880 ¼ Elbow 13 883 Outer Pipe (Galvanized), 10"x 4' 12 895 Inner Pipe (Stainless), 8"x 4' 12 898 Inner Pipe (Stainless), 10"x 4' 12 1085 Fuse Holder 14 1087 2 Amp Fuse 14 1089 3 Amp Fuse 14 1247 Well, ½ NPT 10 1266 Linkage (All linkage Models) 13 1270 Linkage (Wire Loop Models) 13 1272 Pump Flange Kit, 1¼ 6 1280 Motor 4 1311 Central PEX Tube x 100' 6 1312 Central PEX Tube x 200' 6 1313 Central PEX Tube x 300' 6 1314 Central PEX Tube x 500' 6 1320 Central PEX ½ Tube x 300' 6 1321 Central PEX ½ Tube x 500' 6 1322 Central PEX ½ Tube x 1000' 6 1323 Decoiler 12 1324 PEX Adapter, PEX x MIP 6 1325 Solder 8 1329 Manifold w/valves, 3 Loop 7 1330 PEX Adapter, PEX x ¾ MIP 6 1331 PEX Adapter, PEX x C 6 1332 PEX Tee, 6 1333 PEX Coupling, 6 1334 PEX Elbow, 6 1335 PEX Crimp Ring, 6 1336 PEX Adapter, PEX x ¾ MIP 6 1337 PEX Adapter, ½ PEX x ½ C 6 1338 PEX Tee, ½ 6 1339 PEX Coupling, ½ 6 1340 PEX Elbow, ½ 6 1341 PEX Adapter, ½ PEX x ½ MIP 6 1342 PEX Crimp Ring, ½ 6 1349 Manifold w/valves, 2 Loop 7 1496 Transformer 14 1497 LED Temperature Display 14 1695 Y-Strainer, ¾ 9 1880 Manifold w/o Valves, 2 Loop 7 1885 Manifold w/o Valves, 3 Loop 7 2053 Fittings Kit 8 2480 Stainless Steel Reducer, 10"x 8"SS 12 2481 Stainless Steel Reducer, 12"x 10"SS 12 3851 Brass Hex Bushing, 1¼ x ¾ 8 5459 Pipe Plug Wrench Set 8 5575 Door Lock Kit, CL 7260 & Pallet Burner 13 5734 FlatPlate Heat Exchanger, 3/4 in. 7 5735 FlatPlate Heat Exchanger, 1 in. 7 5736 FlatPlate Heat Exchanger, 1 in. 7 5737 FlatPlate Heat Exchanger, 1 in. 7 5738 FlatPlate Heat Exchanger, 1 in. 7 5744 FlatPlate Heat Exchanger, 1¼ in. 7 5747 FlatPlate Heat Exchanger, 1¼ in. 7 5769 FlatPlate Heat Exchanger, 1¼ in. 7 5775 Time Delay Relay 14 5778 Snap Disc 13 5807 FlatPlate Mounting Bracket 7 5814 FlatPlate Heat Exchanger, 1¼ in. 7 5842 FlatPlate Heat Exchanger, 1¼ in. 7 5871 Swing Check Valve, 1 1/4" FIP 9 5907 Brass Pipe Union, ¾ 8 5908 Brass Pipe Union, 8 5909 Brass Pipe Union, 1¼ 8 5918 Fin Comb 14 5925 Ratchet Crimp Tool, ½, 6 5926 PEX Steel Clamp (crimp ring) 6 5927 PEX Steel Clamp (crimp ring), ½ 6 5947 Digital Temperature Controller 14 5971 1¼ PEX Tube, 1¼ x 164' 9 5972 1¼ PEX Tube, 1¼ x 328' 9 5977 Snap Disc 13 5978 Hose Clamp, 6 5998 Photoelectric Eye 14 6497 Contact Block 14 6498 Selector Switch 14 6500 Rocker Switch (ON-OFF) 14 6501 Rocker Switch (ON-OFF-ON) 14 6509 Light Bulb 14 6510 Lens 14 6576 Draft Inducer, CL 7260 Door 13 6593 Grounding Rod Kit 14 6648 5 Amp Fuse 14 6677 Fittings Kit, Threaded 7 6678 Fittings Kit, Sweat 7 6679 Female Adapter 7 6724 Stainless Chimney 12 6725 Stainless Chimney Tee 12 6727 Offset Tee 8 6771 Kickspace Hydronic Heater 5 6772 Kickspace Hydronic Heater 5 6773 Kickspace Hydronic Heater 5 6774 Recessed Wall Hydronic Heater 5 6775 Floor Hydronic Heater 5 6776 Wall Mount Hydronic Heater 5 6777 Wall Mount Hydronic Heater 5 6778 Wall Mount Hydronic Heater 5 6779 Wall Mount Hydronic Heater 5 May 2004 For your closest dealer, contact us at centralboiler.com, hydrofire.com, or call 1-800-248-4681 15