HEATXL RVS Electric Infrared Heater HeatXL RVS Heater is an all-round, supplementary or overall heater for conservatories, balconies, patios and is also effective as a spot/zone heater in workshops, warehouses etc. HeatXL RVS Heater is approved in splash-proof IP44 design for wet and dry rooms and outdoor installations. For that reason suitable also in bathrooms and utility rooms. Ceiling or wall mounted.
HeatXL RVS Heater is used often as a supplementary heater in conservatories, balconies, patios etc. It is also suitable for spot and zone heating in workshops and warehouses etc. It may be fitted in wet and dry areas such as bathrooms and washing rooms. HeatXL RVS Heater is constructed of corrosion protected materials which assures a long life span. The casing, heating element, brackets and protective guards are made of uncoated stainless steel. The reflector is made of high-gloss polished aluminium. HeatXL RVS Heater is available in three models, EIR500, EIR1000 and EIR1500 at 230V, see table. HeatXL RVS Heater can be ceiling or wall mounted. The supplied fixing brackets are adjustable and can be angled in different fixed positions. The heater can also be suspended on wires, chains etc. The RVS heater is approved in splash-proof IP44 design for wet and dry rooms and for outdoor installations. HeatXL RVS heater is approved for fixed installation by an authorised electrician. Cable connections are to a 4mm2 terminal in the junction box at the end of the heater. Connection between several heaters is possible. Heat control is simply carried out with use of our room thermostats. Where a large number of heaters are fitted, one of our control panels may be used (ask us for separate information). Type 230V~ cm L B H C/C kg RVS-500 500 W 70 7,5 4 50 1,5 RVS-1000 1000 W 117 7,5 4 81 2,0 RVS-1500 1500 W 168 7,5 4 110 3,0
HEATXL RVS Industry Electric Infrared Heater HeatXL RVS Industry provides an energy efficient heating for most applications and working environments with high ceiling heights, approximately 3-40 m. Heat accumulation in floors, walls and other surfaces means that the air temperature can be lowered, giving 25-50% energy savings and yet achieving the same warmth comfort. HeatXL RVS Industry, with its high operating temperature, may also be used outdoors, i.e. loading bays etc. The heater is approved in splash-proof IP44 design for wet and dry areas and outdoor installations.
Just like the sun warms the earth, HeatXL RVS Industry emits high temperature radiation which warms floors, walls and other surfaces. As a result you can lower the air temperature in the room and yet achieve the same warmth comfort with energy savings of 25-50% in comparison to hot air heating. The high operation temperature makes the HeatXL RVS Industry especially suited for overall heating of applications with high ceilings, from approximately 4-40 m. When used for spot heating in draughty working environments, the heater can be mounted from 3 m above the floor. It is also suitable for outdoor use, i.e. loading bays, spectator stands etc. HeatXL RVS Industry is constructed of corrosion protected materials which assures a long life span. The casing and brackets are made of galvanised sheet steel, heating elements of stainless steel. The reflector is made of high-gloss polished aluminium. HeatXL RVS Industry is available in three types, EIR3000, EIR4500 and EIR6000, see table. The heater has three separate heating elements, 1 +1 +1, and can be connected to either 230V or 400V. It can be ceiling or wall mounted. Supplied fixing brackets are adjustable and can be angled in different fixed positions, see fig. 1. The heater can also be suspended on wires, chains etc. (optional extra). HeatXL RVS Industry is approved in splash-proof IP44 design for wet and dry areas and outdoor installations. L HeatXL RVS Industry is approved for fixed installation by an authorised electrician. Cable connections are to a 16 mm2 terminal in the junction box at the end of the heater. The junction box has two cable lead-ins. Connection between several heaters is possible. Cable Entries D C/C B Fixing bracket H Heat control is simply carried out with use of our room thermostats and/or a 3-step switch. Another clever heat management is our wireless dimmer solutions, ask us for information. Type 230V~/400V 3~ cm L B H C/C kg RVS-3000 3000 W 103 30 8 65 5.5 RVS-4500 4500 W 136 30 8 82 7.0 RVS-6000 6000 W 168 30 8 103 8.5 Note! The heaters are convertible between 230V 1~ and 400V 3~
HEATXL Line Electric Bench/Ceiling Heater HeatXL Line may be fitted underneath benches in churches, waiting rooms, halls, sports halls, spectator stands etc. When ceiling mounted it is effective up to 3 m height. The elegant slimline heater provides a comfortable and gentle heat. It is unobtrusive and aesthetically blends in with the environment. HeatXL Line is approved in splash-proof IP44 design for wet and dry areas.
HeatXL Line is a slimline, 3.5 cm thick, low temperature heating panel which mainly emits radiant heat. It has been developed especially as a bench heater but can also be fitted as a ceiling heater. As a bench heater it may be fitted underneath benches in churches, waiting rooms, halls, sports/leisure halls etc. It warms the bench as well as the floor directly underneath. This is a particularly good method to warm specific areas where large air volumes are present which does not need to be heated. The bench heater has a rapid heat-up time with comfortable heat directed to where you want it, with good economy and low energy consumption as a result. As a ceiling heater it is suited to smaller spaces with low ceiling heights up to 3 m. It can be ceiling or wall mounted. Effectively it replaces heat Iosses and down draught. It achieves high warmth comfort and energy savings of 15-25% in comparison to conventional heating systems. The thin and elegant design blends in well with the environment and when ceiling mounted it frees valuable wall and floor space. Furthermore it is safe from contact and damage which is an advantage in public places. HeatXL Line is made of galvanised sheet steel and comes as standard in white powder coated finish. It is available in two sizes and outputs at 230V, see table. HeatXL Line is approved in splash-proof IP44 design for wet and dry areas. HeatXL Line is approved for fixed installation by an authorised electrician. Cable connections are to a 4 mm2 terminal in the junction box on top of the heater. Connection between several heaters is possible. Heat control is carried out simply with the use of our room thermostats. Where a large number of heaters are fitted, one of our automatic control panels may be used (see separate brochure). Type 230V~ cm kg L B H C/C LINE-200 150 W 100 21 3,5 99 3,0 LINE-220 220 W 148 21 3,5 147 4,5