Applying Functional Safety Engineering Technique to Optimize Defensive Fire Protection Strategy

Similar documents
Fire and Gas Mapping- Updates to ISA84 TR7

Fire and Gas Detection and Mitigation Systems

IEC61511 Standard Overview

Safety Transmitter / Logic Solver Hybrids. Standards Certification Education & Training Publishing Conferences & Exhibits

Managing the Lifecycle of Independent Protection Layers

risk management and assessment for business Lessons Learned from Real World Application of Bow-tie Method 2010 International Symposium

ICHEME SYMPOSIUM SERIES NO. 144 A METHODOLOGY FOR ASSESSING AND MINIMISING THE RISKS ASSOCIATED WITH FIREWATER RUN-OFF ON OLDER MANUFACTURING PLANTS

Karl Watson, ABB Consulting Houston LOPA. A Storage Tank Case Study. ABB Inc. September 20, 2011 Slide 1

Using CFD to Analyze Gas Detector Placement in Process Facilities

Y. ORMIERES. Fire risk analysis method for nuclear installations

Safety Instrumented Systems Overview and Awareness. Workbook and Study Guide

AVOID CATASTROPHIC SITUATIONS: EXPERT FIRE AND GAS CONSULTANCY OPTIMIZES SAFETY

COMPARISON OF NFPA AND ISO APPROACHES FOR EVALUATING SEPARATION DISTANCES

Safety Integrity Verification and Validation of a High Integrity Pressure Protection System to IEC 61511

How to Use Fire Risk Assessment Tools to Evaluate Performance Based Designs

Explosion Protection Engineering Principles

AVOID CATASTROPHIC SITUATIONS: EXPERT FIRE AND GAS CONSULTANCY OPTIMIZES SAFETY

Quantitative Evaluation of the Safety Barriers to Prevent Fired Domino Effect

Session Number: 3 SIL-Rated Fire (& Gas) Safety Functions Fact or Fiction?

FUNCTIONAL SAFETY IN FIRE PROTECTION SYSTEM E-BOOK

ELC International Inc

Practical Methods for Process Safety Management

Failure Rate Data, Safety System Modeling Concepts, and Fire & Gas Systems Moderator: Lori Dearman, Webinar Producer Thursday, May 16th, 2013

Addressing Challenges in HIPPS Design and Implementation

PRELIMINARY ANALYSIS OF THE NUMBER OF OCCUPANTS, FIRE GROWTH, DETECTION TIMES AND PRE-MOVEMENT TIMES FOR PROBABILISTIC RISK ASSESSMENT

Using HAZOP/LOPA to Create an Effective Mechanical Integrity Program

Safety Instrumented Systems

Key Topics. Steven T. Maher, PE CSP. Using HAZOP/LOPA to Create an Effective Mechanical Integrity Program. David J. Childs

FUNCTIONAL SAFETY: A PRACTICAL APPROACH FOR END-USERS AND SYSTEM INTEGRATORS

FMEDA Report. Failure Modes, Effects and Diagnostic Analysis. KFD0-CS-Ex*.54* and KFD0-CS-Ex*.56* Project: X7300

Failure Modes, Effects and Diagnostic Analysis

Soliphant M with electronic insert FEM52

Risk-Informed Industrial Fire Protection Engineering

Fire Protection Regulatory Approach for Nuclear Power Plants in Canada

Process Safety - Market Requirements. V.P.Raman Mott MacDonald Pvt. Ltd.

FIRE HAZARD ASSESSMENT IN SUPPORTING FIRE PROTECTION SYSTEM DESIGN OF A CHEMICAL PROCESS FACILITY ABSTRACT

Failure Modes, Effects and Diagnostic Analysis

Industrial Explosion Suppression Technology

Emergency shutdown systems. Procedures for bypassing ESD s

Bowties in process safety auditing

Fire Protection as the Underpinning of Good Process Safety Programs

Integrated but separate

Bowties in process safety auditing

Safety in the process industry

Process Safety. Allan Rentcome Director Engineering Process Safety Technologies. Insert Photo Here

Adrian Milford Sereca - a Jensen Hughes Company, Project Engineer Vancouver, BC, Canada

Fire Risks of Loviisa NPP During Shutdown States

By Dr. Maurice Stewart, PE, CSP Worldwide Petroleum Training

International Journal of Advance Engineering and Research Development

Construction Requirements and the Ontario Building Code

International Safety Guide Chapter 30 for Inland Navigation Tank-barges and Terminals. Chapter 30 FIRE-FIGHTING

Scope of Section 2. AS vs. Application Issues. Schedules & Log- Contents. Books

TRIPR FLAMMABLE LIQUID UNIT TRAINS

ATEX 1999/92/EC (Borehole Directive 92/91/EEC) PROCESS SAFETY ASPECTS

Tank protection example using Simatic

Martin Huber 26September 2017 F&G SOLUTIONS FOR THE PROCESS INDUSTRY

High challenge warehouse case study Summary

Optimization of gas detectors

Failure Modes, Effects and Diagnostic Analysis

SAFETY MANUAL. IR5000 Open Path Hydrocarbon Gas Monitoring System

Risk Assessment of large Hydrocarbon Storage tanks. G. Unnikrishnan, Kuwait Oil Company

Development of an Environmental and Economic Assessment Tool (Enveco Tool) Francine Amon, Jonatan Gehandler, Selim Stahl

The key element for your process

4 August Islington Fire Protection Transpower NZ Limited

Reliability of Safety-Critical Systems Chapter 1. Introduction

, CFSE, Senior Manager, ABB Taiwan;, 2011/9/2. Functional Safety. ABB Group September 5, 2011 Slide 1

FIRE PROBABILISTIC SAFETY ASSESSMENT FOR KUDANKULAM NPP IN INDIA. G.Tokmachev. Atomenergoproekt, Bakuninskaya 7, Moscow, Russia

GAS DETECTOR LOCATION. Ø.Strøm and J.R. Bakke, GexCon AS, Norway

Contents. xiii. 4. PHYSICAL PROPERTIES OF HYDROCARBONS General Alkene Series... 28

WATER MIST FIRE PROTECTION SYSTEMS FOR INDUSTRIAL CABLE TUNNELS AND TURBINE HALLS

Before proceeding with the selection process, let s briefly look at the various explosion protection options:

Laser-based gas detection technology and dispersion modeling used to eliminate false alarms and improve safety performance on Terra Nova FPSO

Failure Modes, Effects and Diagnostic Analysis. Rosemount Inc. Chanhassen, Minnesota USA

SAFETY MANUAL. FL4000H and FL4000 Multi-Spectral Infrared Flame Detectors

InstrumentationTools.com

ECONOMIC JUSTIFICATION FOR SPRINKLER SYSTEMS

MSA Flame & Gas Mapping

Early Warning Fire Detection Engineering

Functional Safety Application of IEC & IEC to asset protection

Other EC and LS documents may be requested by surveyors, as needed, throughout the survey.

PRIMATECH WHITE PAPER PROCEDURE FOR DUST HAZARD ANALYSIS (DHA)

Failure Modes, Effects and Diagnostic Analysis

APPLICATION BULLETIN COMBUSTION TURBINE FACILITIES. Overview

RIM SEAL SYSTEMS E-BOOK

Active & Passive Fire Protection System. Page 1 Kalidasan S BT IN SSP-OP

Failure Modes, Effects and Diagnostic Analysis. PR electronics A/S Rønde Denmark

An Approach towards Safety Using Safety Instrumented Systems: A Case Study

Failure Modes, Effects and Diagnostic Analysis

High Integrity Pressure Protection System

Failure Modes, Effects and Diagnostic Analysis

Failure Modes, Effects and Diagnostic Analysis. Rosemount Inc. Chanhassen, MN USA

innova-ve entrepreneurial global 1

Proven Fire Fighting Efficiency for Large Transformers with High Pressure Water Mist

FIXED PROTECTION FOR OIL AND CHEMICAL PLANTS

Webinar November 12, 2014

Failure Modes, Effects and Diagnostic Analysis

OWNER'S OPERATION AND MAINTENANCE MANUAL

PPA Michaël GROSSI - FSCE PR electronics

1 Batterymarch Park, Quincy, MA Phone: Fax: M E M O R A N D U M

Failure Modes, Effects and Diagnostic Analysis

Transcription:

Applying Functional Safety Engineering Technique to Optimize Defensive Fire Protection Strategy 66 th Canadian Chemical Engineering Conference October 19 th, 2016 Presented by Sam Sanati, P.Eng, FS Eng. 30 January 2017 1

Fire Protection Design Prescriptive Design Deterministic Design Probabilistic Design Codes Standards Fire Scenario (severity) Specification Fire Scenario (severity) Risk of events Specification Specification Performance based Performance based 30 January 2017 2

Deterministic vs Probabilistic NFPA 551 Definitions: Deterministic Model: In a deterministic model, the quantities being modeled are treated as being completely certain the purpose of the model is to provide an estimate of these quantities. Probabilistic Method: In a probabilistic model, the quantities being modeled are treated as being uncertain the purpose of the model is to quantify the degree of uncertainty in these quantities. 30 January 2017 NFPA 551: Guide for the Evaluation of Fire Risk Assessments 3

Defensive Fire Protection NFPA 600 Definitions: Defensive: The mode of manual fire control in which the only fire suppression activities taken are limited to those required to keep a fire from extending from one area to another. Offensive: The mode of manual fire control in which manual fire suppression activities are concentrated on reducing the size of a fire to accomplish extinguishment. 30 January 2017 4 NFPA 600: Standard on Facility Fire Brigades

Risk Based Fire Protection Design Scenario Selection Consequence & Freq. Analysis Barriers Effectiveness Event Tree Analysis Risk Plotting 30 January 2017 5

Event Tree Analysis Leak Frequency Ignition Probability Immediate to Delay Ignition Event Frequency 3.38% Delayed 50% 5.83x10 5 VCE Loss of Containment 3.45 x10 3 Immediate 50% 5.83x10 5 Jet Fire / BLEVE 96.62% No Ignition 3.33x10 3 Dispersed Gas

ETA with Barriers Leak Frequency Loss of Containment Ignition Probability 3.38% Detection / ESD / De-Press Fail Immediate to Delay Ignition Delayed 50% Immediate 50% Exposure Impinged Exposed Fire Water Pumps Fail Success Deluge System Fail PFP Fail Success Fire Escalation Event Frequency VCE BLEVE Jet Fire BLEVE (Time Dependent) BLEVE (Time Dependent) 3.45 x10 3 Success Fire Escalation Jet Fire Success Fire Controlled 96.62% No Ignition Dispersed Gas

Reliability of Barriers Reliability of the barriers depends on: failure frequency test intervals, mean time to restore (MTTR) and diagnostic coverage. 30 January 2017 8

Failure on Demands Type of Barriers Failures Test Interval (yr) Calculated PFD Selected PFD Remarks (per 10 6 hr) (Based on Industry Practice) Gas Detector (IR) 2.26 1 4.49x10-3 3.07x10-3 Test interval every 3 months. However, standard test interval is every year Fusible Link 1x10-6 Reference: Grosse et al (1996) Deluge System 5.8 1 1.27x10-2 1.5x10-2 Selected PFD is based on OGP Diesel Fire Water Pump 1550.38 0.02 (Per NFPA weekly) 0.133 0.12 Poorly Maintained Diesel pump is 0.12 Passive Fire Protection 0.01 CCPS Emergency Shutdown 6.5 1 2.89x10-3 2.89x10-3 Valve ESD Logic Solver 16 Unknown 3.5x10-2 3.5x10-2 Test Interval is normally 1 yr 30 January 2017 9

Effectiveness of Barriers Effectiveness of barriers and safeguards should be evaluated by considering the following elements: Functionality; Maintenance History; Voting Logic; and Dependability. 30 January 2017 10

Dependability Dependability System Integration Operator Intervention Instrumentation Integrity Mechanical Integrity Activate Emergency System Initiate Suppression 30 January 2017 11

Dependable Equipment Impairment 30 January 2017 12

Maintenance Condition & History 30 January 2017 13

Functionality Deluge for BLEVE impingement (PFD=1) Using Improper type of fireproofing or jacketing (PFD=1) 30 January 2017 14

Voting Logic ESD System G D G D PFD = 4.98 x 10-2 Sensor 2oo2 Logic Solver 1oo1 Final Element 3oo3 Detectors/Operators/ ESD Logic / F&G ESDV / Alarm 30 January 2017 etc. Logic 15

Voting Logic No epressurization Sensor 1oo1 Logic Solver 1oo1 Final Element 2oo2 PFD = 4.70 x 10-2 Detectors, etc. ESD Logic / F&G Logic ESDV / Alarm Operator Intervention Operator Intervention Logic Solver 1oo1 Final Element 3oo3 PFD = 1.41 x 10-1 ESD Logic / F&G Logic ESDV / Alarm 30 January 2017 16

Case Study: NGL Bullets Fire Protection System: No PFP No F&G No De-Pressurization Poor Firewater system 30 January 2017 17

Consequence Analysis Results Event Threshold Impact Distance BLEVE Fireball Distances (m) at 1 m above Ground 1000 tdu 2000 tdu 3200 tdu (%100 Fatality) Jet Fire 35 kw/m 2 (%100 Fatality) Overpressure Overpressure 5 psig (%100 Fatality indoor) 7.5 psig (%50 Fatality indoor) 196 m 123 m # Fatality 72 m 5* 46 m 5* 64 m 5* 51 m 2.5* * Assume 10 workers/operators are working outdoor and 5 operators inside the building. 30 January 2017 18

Original ETA Leak Frequency Loss of Containment Ignition Probability 3.38% Detection / ESD / De-Press Fail Immediate to Delay Ignition Delayed 50% Immediate 50% Exposure Impinged Exposed Fire Water Pumps Fail Success Deluge System Fail PFP Fail Success Event Frequency 5.83 x10 5 2.92x10 5 3.5 x10 6 3.08 x10 7 VCE BLEVE Jet Fire BLEVE (Time Dependent) BLEVE (Time Dependent) 3.45 x10 3 Success 2.53 x10 5 Jet Fire Success Fire Controlled 96.62% No Ignition 3.33 x10 3 Dispersed Gas

Risk Plotting <10-6 10-6 < to <10-4 10-4 < to <10-3 10-3 < to <10-2 10-2 < avg. 10-5 avg. 10-4 avg. 10-3 avg. 10-2 N= 50+ N= 10 to 50 BLEVE N= 3 to 10 Jet Fire N= 1 to 2 Medical Aid 30 January 2017 20

Defensive Fire Protection Design Options 1. Emergency Systems (ESD, F&G, Depressurization) 2. Passive Fire Protection 3. Emergency systems + Active Fire Protection 4. Emergency system + Passive Fire Protection 30 January 2017 21

Improvements Improvement Improvement Existing PFD Improved PFD Firewater Diesel Pump Deluge Valve tests Interval Detection system Valve tests Interval From 3yrs to 6 months From 1 yr to 6 months ESDV test interval From 1 yr to 6 months 0.12 0.065 0.015 0.0063 4.95 x 10-3 2.5 x 10-3 2.9 x 10-3 1.5 x 10-3 30 January 2017 22

Improve Risk Frequency Event 1 Detection/ ESD/ Depress. 2 Passive Fire Protection 3 Improved F&G/ESD/ Depress. & AFP 4 Improved F&G/ESD/ Depress. & PFP VCE 2.9 x 10-6 5.83 x 10-5 1.36 x 10-6 1.34 x 10-6 BLEVE 2.9 x 10-6 5.83 x 10-8 7.15 x 10-7 1.34 x 10-9 Jet Fire N/A 5.82 x 10-5 6.2 x 10-7 1.33 x 10-6 Controlled Fire 1.11 x 10-4 N/A 1.14 x 10-4 1.14 x 10-4 BLEVE Event Frequency 2.9 x 10-6 5.83 x 10-8 7.15 x 10-7 1.34 x 10-9 30 January 2017 23

Improved Risk Plotting <10-6 10-6 < to <10-4 10-4 < to <10-3 10-3 < to <10-2 10-2 < avg. 10-5 avg. 10-4 avg. 10-3 avg. 10-2 N= 50+ N= 10 to 50 Option 2,3 &4 Option 1 N= 3 to 10 N= 1 to 2 Medical Aid 30 January 2017 24

What would change the results Risk matrix structure Type of Fire Population Distribution Spacing, siting, building type Equipment arrangement Mechanical Integrity Program 30 January 2017 25

Thank you If you d like to find out more contact: Sam.Sanati@atkinsglobal.com Or visit: www.atkinsglobal.com Atkins Limited except where stated otherwise. 30 January 2017 26