CONTENTS SAFETY WARNINGS AND GUIDELINES... 3 INTRODUCTION... 5 CUSTOMER SERVICE... 5 PACKAGE CONTENTS... 5 PRODUCT OVERVIEW... 6 PREPARATION FOR INSTALLATION... 6 INSTALLATION... 7 OPERATION... 8 CARE AND MAINTENANCE... 8 Cleaning... 8 Moving the Cooler... 9 TROUBLESHOOTING... 9 SPECIFICATIONS... 10 2
SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference. This cooler is not intended for the storage of medicine or other medical products. To prevent risk of child entrapment, remove the door from the cooler before discarding or storing the cooler. Leave the shelves inside to make it more difficult for children to climb inside. Never allow children to operate, play with, or crawl inside the appliance. Never clean the cooler with flammable fluids. The fumes can create a fire hazard or explosion. Do not store or use gasoline or any other flammable vapors or liquids in the vicinity of this appliance. The fumes can create a fire hazard. This appliance is intended for indoor use only. Do not touch the power cord with wet hands. Prior to operation, check the unit and power cord for physical damage. Do not use if physical damage has occurred. Before plugging the unit into a power outlet, ensure that the outlet provides the same type and level of power required by the device. This device uses a grounded power cord and requires a ground connection for safe operation. Ensure that the power source has a proper ground connection. Do not modify the plug or use a "cheater" plug to bypass the ground connection. Disconnect the appliance from the power source when replacing the fuse. Replace the fuse only with the same type. Take care to prevent damage to the power cord. Do not allow it to become crimped, pinched, walked on, or become tangled with other cords. Ensure that the power cord does not present a tripping hazard. Never unplug the appliance by pulling on the power cord. Always grasp the connector head or adapter body. 3
This appliance has no user serviceable parts. Do not attempt to open, service, or modify this device. The appliance should be plugged into its own individual electrical outlet. This provides the best performance and avoids overloading the house wiring circuits, which could cause a fire hazard. This appliance is intended to be used in a free-standing installation only. Do not recess it or build it into a cabinet. Ensure that there is at least 5" of space between the back and sides of the cooler and any nearby walls or furniture to allow sufficient air circulation to cool the heat sink. This appliance uses thermoelectric refrigeration technology (no compressor) and is not designed for use in hot areas, such as garages, warehouses, or outdoors. Do not install this appliance in, on, or near heat sources, such as a fireplace, stove, radiator, etc. Do not install it in direct sunlight. Unplug the appliance from the AC power outlet before cleaning or moving the cooler. Do not install this appliance in moist areas. If power is lost, minimize temperature loss by minimizing the number of times you open the doors. If power will remain off for more than a few hours, take proper steps to protect any perishable items. 4
INTRODUCTION Thank you for purchasing this 2-in-1 Wine and Beverage Cooler! This wine cooler uses thermoelectric refrigeration technology, so you won't be disturbed by a noisy compressor. It features two separate cooling compartments with separate temperature controls. The upper compartment can be set to 46 ~ 64 F (8 ~ 18 C), while the lower compartment can be set to 37 ~ 64 F (3 ~ 18 C). It is designed to be installed in a place where the ambient temperature is between 72 ~ 78 F (23 ~ 26 C). CUSTOMER SERVICE The Monoprice Customer Service department is dedicated to ensuring that your ordering, purchasing, and delivery experience is second to none. If you have any problem with your order, please give us an opportunity to make it right. You can contact a Monoprice Customer Service representative through the Live Chat link on our website www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm PT, Sat-Sun: 9am- 6pm PT) or via email at support@monoprice.com PACKAGE CONTENTS Please take an inventory of the package contents to ensure you have all the items listed below. If anything is missing or damaged, please contact Monoprice Customer Service for a replacement. 1x 2-in-1 Wine and Beverage Cooler 1x Removable Wooden Shelf 2x Removable Metal Shelves 1x User's Manual 5
PRODUCT OVERVIEW 1. Cooler Cabinet 2. Ventilation Holes 3. Cold Sink Fan 4. Cold Sink Fan Cover 5. Shelves (three total) 6. Leveling Legs 7. Upper Door Hinge with Cover 8. Upper Door 9. Lower Door 10. Lower Door Hinge PREPARATION FOR INSTALLATION Perform the following steps upon receiving the appliance, prior to installation. 1. Remove the exterior and interior packing. 2. Verify that all parts listed in the PACKAGE CONTENTS section above are present. 3. Clean the interior surfaces with lukewarm water using a soft cloth. 6
Consider the following guidelines when installing this appliance. This appliance is intended to be used in a free-standing installation only. Do not recess it or build it into a cabinet. Place the appliance on a surface that is capable of supporting the weight of the appliance when it is fully loaded. The appliance should be plugged into its own individual electrical outlet. This provides the best performance and avoids overloading the house wiring circuits, which could cause a fire hazard. Ensure that there is at least 5" of space between the back and sides of the cooler and any nearby walls or furniture to allow sufficient air circulation to cool the heat sink. This appliance uses thermoelectric refrigeration technology (no compressor) and is not designed for use in hot areas, such as garages, warehouses, or outdoors. It should be installed in a location with an ambient temperature between 72 ~ 78 F (23~ 26 C). Do not install this appliance in direct sunlight. Do not install this appliance in moist areas. INSTALLATION 1. Once the cooler has been placed in its intended location, plug the power cord into a nearby AC power outlet. Ensure that the power cord does not present a tripping hazard. 2. Open the lower door, then install the shelves. 3. Close the doors, then use the Controls to set the temperatures as desired. Allow the cooler to operate for 2-3 hours before placing any items inside. 7
OPERATION This wine cooler is equipped with an automatic control panel lock feature. The lock will automatically activate 20 seconds after the last button press. Press and hold the button for about 2-3 seconds to unlock the control panel. The cooler will respond with a beep, indicating that the control panel is unlocked. Momentarily press the button to select the upper or lower compartment. Press the button to increase or the button to decrease the temperature for the selected compartment, in 1 degree increments. Press and hold the button for about 2 seconds to swap the temperature display between Fahrenheit and Celsius. Momentarily press the button to turn the internal light on. The light will automatically turn off after 10 minutes. CARE AND MAINTENANCE Cleaning 1. Unplug the cooler from the AC power outlet. 2. Remove all items from the cooler, including the shelves. 3. Create a solution of warm water and baking soda at the ratio of about 2 tablespoons of baking soda for each quart of water. 4. Wash the inside surface of the cooler using the baking soda solution and a soft cloth or sponge. 5. Wash the shelves with warm water and a mild detergent. 8
6. Wash the outside surfaces of the cooler using a solution of warm water and mild detergent. Wring any excess water out of the cloth or sponge before cleaning the control panel or any electrical parts. 7. Rinse well and wipe dry using a clean, soft cloth. Moving the Cooler 1. Unplug the cooler from the AC power outlet. 2. Remove all contents. 3. Either remove the shelves or securely tape them in place. 4. Tape the doors shut. 5. Use a blanket or similar item to protect the outside of the appliance. TROUBLESHOOTING Q1: The cooler does not operate. A1: Check that the appliance is plugged into a nearby AC power outlet. Verify that the AC power outlet is live by plugging in another device, such as a lamp. Q2: The control panel will not operate. A2: The control panel may be locked. Press and hold the button until the control panel beeps to unlock the controls. Q3: The wine cooler does not get cold enough. A3: Try using a lower temperature setting. Ensure that the appliance is installed in a location with an ambient temperature between 72 ~ 78 F (23 ~ 26 C). Ensure that the doors are fully closed. Do not open the door too often. Check that the door seals are not dirty and are in good condition. 9
Q4: The light does not work. A4: Verify that the appliance is plugged into as live AC power outlet. Press the button to turn the light on. Q5: One or both doors do not close properly. A5: Ensure that the appliance is installed in a level location. Check that the door seals are not dirty and are in good condition. Ensure that the shelves are properly installed and are not blocking the door from closing. SPECIFICATIONS Model 24211 Refrigeration Technology Input Power Maximum Power Consumption Cooling Limit Nominal Upper Zone Capacity Operating Temperature Range Upper Zone Temperature Range Lower Zone Temperature Range Thermoelectric (no compressor) 115 VAC, 60Hz 140 watts 30 F (16.7 C) below ambient temperature 8 standard 750ml wine bottles +72 ~ +78 F (+23 ~ +26 C) +46 ~ +64 F (+8 ~ +18 C) +37 ~ +64 F (+3 ~ +18 C) 10