aparatura testare materiale constructii

aparatura testare materiale constructii

CUPRINS I. Concrete Full Automatic Concrete Compression Test Machine Flexural Test on Concrete Beams Flexural Test on Concrete Blocks Flexural Test on Kerbs Blocks Test Platens with sliding rail assembly Blocks Test Platens Fitted to Compression Machine Splitting Tensile Test Device for Cylindrical Specimens Splitting Tensile Test Device for Concrete Block Pavers Splitting Tensile Test Device for Concrete Cubes Specific Gravity Frame Concrete Beam Moulds Concrete Cube Moulds Vibrating Table Concrete Impermeability Apparatus Bulk Density Measures Waltz Container Slump Test Set Flow Table (Laboratory Method) Air Entrainment Meter Curing Tank Vebe Consistometer Specific Gravity Frame V Funnel L Shape Box Hydraulic Universal Testing Machine II. Cement Cement Flow Table EN Model Automatic Programmable and Manual Mortar Mixer Jolting Table Curing Cabinet Le Chatelier Water Bath Blaine Fineness Apparatus Le Chatelier Test Set Vicat Test Set Cement Compression and Flexure Machine Cement Moulds Le Chatelier Flask Cement Flow Table ASTM Model pg. 2 pg. 3 pg. 3 pg. 3 pg. 3 pg. 3 pg. 3 pg. 3 pg. 3 pg. 3 pg. 3 pg. 3 pg. 4 pg. 4 pg. 4 pg. 5 pg. 5 pg. 5 pg. 6 pg. 6 pg. 6 pg. 7 pg. 7 pg. 7 pg. 8 pg. 10 pg. 10 pg. 11 pg. 11 pg. 11 pg. 12 pg. 12 pg. 13 pg. 13 pg. 15 pg. 15 pg. 15

CUPRINS III. Agregate Abrasion Testing Machine Shape Index Gauge Determination of Resistance to Freezing and Thawing Climatic Chamber Methylene Blue Test Set Micro-Deval Testing Machine Skid Resistance and Friction Tester (Skid Tester) AAV Abrasion Machine Accelerated Polishing Machine Sand Equivalent Test Set Los Angeles (Determination of Resistance to Fragmentation) Testing Sieves Thermometers Water Bath Muffle Furnace U Shape Box Digital Balances Laboratory Hardware Laboratory Glassware Porcelain / Mortar and Pestles Sieve Shaker Drying Oven Vacuum Pump Casagrande Sand Cone Density Set Sand Equivalent Shaker Flakiness Sieves Grid Sieves Automatic Soil Compactor Sand Replacement Test Set Standard / Modified Proctor Mould and Rammer IV. Asphalt Marshall Stability Machine Asphalt Mixer (5lt) Asphalt Mixer (10lt) Bitumen Penetrometer Ductility Testing Machine Softening Point (Ring and Ball) Apparatus Loss on Heating Oven (TFOT) "Vialit Plate" Adhesion Test Apparatus Core Drilling Machine Centrifuge Extractor Manual Marshall Hammer Assembly Automatic Marshall Compactor Saybolt Viscometer Marshall Mould Universal Extruder pg. 16 pg. 16 pg. 16 pg. 17 pg. 17 pg. 18 pg. 18 pg. 18 pg. 19 pg. 19 pg. 20 pg. 20 pg. 21 pg. 21 pg. 22 pg. 22 pg. 22 pg. 23 pg. 23 pg. 24 pg. 24 pg. 25 pg. 25 pg. 25 pg. 26 pg. 26 pg. 27 pg. 27 pg. 28 pg. 28 pg. 29 pg. 30 pg. 30 pg. 30 pg. 31 pg. 31 pg. 32 pg. 32 pg. 32 pg. 33 pg. 33 pg. 34 pg. 34 pg. 34

CONCRETE Full Automatic Concrete Compression Test Machine Product Code: UTC - 4320 & UTC - 4420 Standards: EN-12390-4, BS 1881, ASTM C-39 The UTEST automatic range of 2000 kn and 3000 kn capacity compression testing machines has been designed to meet the need for reliable and consistent testing of concrete samples. All UTEST machines feature the complete automatic test cycle with a closed loop digital readout. Once the specimen parameters have been introduced, it is sufficient to press the START button to complete the test. Automatic test cycle with standard Rapid Approach Graphical - LCD Data Acquisition and Control System Menu Driven Software for easy operation Load vs time plot and instantaneous load rate displayed Accurate load rate control within ±5 from 1 kn/sec to 20 kn /sec Class 1 starting from % 10 of the full range Ready Stress Calculation for the standards of EN 12390-3, EN 12390-5, EN 12390-6, EN 1338,EN 1340, EN 196 SI, Metric, Imperial Units Data storage up to 256 tests RS 232 output for printer or PC Free of charge PC software for test control and advanced report printout The main characteristics are High resolution 65.000 points 240*120 pixel blue-white graphic LCD display Standalone full automatic testing capacity CPU card by microprocessor 32 bit ARM risk architecture Can make manual tests if required Large permanent memory up to 256 test results RS232C (optional Ethernet) connection at 57600 band One RS232 serial port for connecting either PC or printer for data transmission Two analogical channels, use for Load Cell or pressure transducer A sample type and dimensions can be entered respect to the standards 18 key touch membrane keyboard Easy to operate with 6 main function keys Language select; English, Turkish, Russian Can control two frames Dual stage pump 750 W power 25 liter oil capacity 60-100 mm/min fast approach speed Model Capacity kn Class 1 range kn Resolution Overall Dimensions mm L x W x H Power W UTC 4320 2000 200-2000 1/ 64.000 800 425 964 750 UTC 4420 3000 300-3000 1/ 64.000 845 465 1048 750 2

CONCRETE Model Ram Travel mm Max. Distance Between Platens mm Platen Diameter mm Weight Kg UTC 4320 50 340 300 800 UTC 4420 50 340 300 1100 Flexural Test on Concrete Beams Flexural Test on Concrete Blocks Flexural Test on Kerbs Blocks Test Platens with sliding rail assembly Blocks Test Platens Fitted to Compression Machine Splitting Tensile Test Device for Cylindrical Specimens Splitting Tensile Test Device for Concrete Block Pavers Splitting Tensile Test Device for Concrete Cubes Specific Gravity Frame Concrete Beam Moulds Product Code: UTC- 0115 100x100x400 mm Steel beam mould UTC- 0115/1 100x100x500 mm Steel beam mould UTC- 0116 150x150x600 mm Steel beam mould UTC- 0116/1 150x150x750 mm Steel beam mould Standards: EN 12390/1, ASTM C39, C192, AASHTO T23, T126 Steel beam moulds are manufactured in accordance to dimensions and tolerances stated in the related standards. Two part and clamp attached base plate steel moulds are designed to be durable, resistant and easy to clean. Weight (approx.) : UTC- 0115 20,3 kg UTC-0115/1 18,5 kg UTC- 0116 38,4 kg UTC- 0116/1 40 kg Concrete Cube Moulds Product Code: UTC- 0101 150x150x150 mm Steel UTC- 0102 150x150x150 mm Plastic UTC- 0103 200x200x200 mm Steel UTC- 0104 100x100x100 mm Steel Standards: EN 12390/1, ASTM C39, C192-AASHTO T23, T126 Cast iron, hard plastic or steel cube moulds are manufactured in accordance to dimensions and tolerances stated in the related standards. Four part and clamp attached base plate cast iron and steel moulds are designed to be durable, resistant and easy to clean. Weight (approx) : UTC- 0101 16,2 kg UTC- 0102 2,2 kg UTC- 0103 20,2 kg UTC- 0104 7,0 kg 3

CONCRETE Vibrating Table General Properties The UTEST fixed amplitude vibrating table is a compact unit providing controlled vibrocompaction in the laboratory using cube or cylinder moulding equipment. Vibrating tables consists of vibrating motor, control unit and clamping assembly. The table is available in two alternative sizes, 610 x 380 mm and 1260 x 620 mm. Small table accepts 2, large table accepts 4 cube, cylinder moulds or beam moulds by using clamping assembly. Product Code: UTC 0159 Vibrating Table (Small) UTC 0161 Vibrating Table (Large) Standards: EN 12390 2 Operates with 220 Volt, 50 Hz supply Dimensions : UTC 0159 610x380x780 mm (wxlxh) 60 kg UTC 0161 1055 620 1055 mm (wxlxh) 154 kg Concrete Impermeability Apparatus Used for the determination of the depth of penetration of water to hardened concrete specimens under pressure. 3 and 6 specimen capacity models are available. The system can test 150x150x150 mm, 200x200x200 mm cube or 150x300mm cylinder specimens. Pressure to the sample, up to 10 bar with 0,2 bar precision is generated by way of compressed air applied to the integral water tank and controlled by a pressure regulator; with a pressure gauge. The penetration of water is measured through the burettes supplied complete with the system. The system comprises impermeability gaskets for every cell. The apparatus has to be fitted with the suitable air compressor with maximum working pressure of 10 bar. Product Code: UTC- 0244/A Three place Model UTC- 0244/B Six place Model Standards: EN 12390-8, ISO 7031 Dimensions : UTC- 0244/A 500x500x1800 mm (lxwxh) 95 kg UTC- 0244/B 500x500x1800 mm (lxwxh) 106 kg Bulk Density Measures Product Code: UTA 0445/1 1 dm³ UTA 0445/2 5 dm³ UTA 0445/3 10 dm³ UTA 0445/4 20 dm³ Standards: EN 1097 3 Bulk Density Measures are manufactured from heavy gauge steel complying with the related standard. Available in 1, 5, 10 and 20 liter capacity models according to the requirements of different standards. Coated against corrosion. Weight (approx.) : UTA-0445/1 UTA-0445/2 5 dm³ 6,1 kg UTA-0445/3 10 dm³ 8.8 kg UTA-0445/4 20 dm³ 12,5 kg 1 dm³ 1,2 kg 4

CONCRETE Waltz Container Product Code: UTC-0146 Standards: EN 12350-4 General Properties Waltz Container consists of a 200x200x400 mm (width x depth x height) metal container with two carrying handles.coated against corrosion. Slump Test Set Product Code:UTC 0149 Slump Test Set UTC 0140 Tamping rod 16x600 mm UTG 0149/5 Steel ruler UTG 0145 Rubber mallet UTG 1611 Laboratory shovel Standards: EN 12350 2, BS 1881: 102, ASTM C143, AASTHO T119 The Slump test method is used for the determination of the consistency, the medium and high workability of fresh concrete. The set consists of slump cone, slump cone funnel, 600 mm long x 16 mm diameter tamping rod which is hemispherical at both ends, base plate, rubber mallet and steel rule. Supplied either galvanized or paint coated to prevent corrosion. Weight (approx) : 5 kg Flow Table (Laboratory Method) Product Code: UTC- 0164 (Manual) UTC- 0165 (Motorized) UTC- 0164/1 Flow Mould UTC 0140 Tamping Rod 16x600 mm Standards: UNI 8020-A The apparatus consists of 762 mm dia. stainless steel circular table and stainless steel flow mould. A sample of concrete is tamped into the flow mould and then the mould is removed. The test is based on measuring a percentage increase in diameter of spread concrete against the moulded concrete by lifting and dropping the table 15 times in about 15 seconds. Manual or motorized models are available. UTC-0169 18.9 kg 5

CONCRETE Air Entrainment Meter Product Code: UTC- 0170 Air Entrainment Meter UTC- 0170/1 Tamping Rod (106X300 mm) UTC- 0170/2 Straight Edge UTC- 0170/M Manometer Standards: EN 12350 7, ASTM C231, AASHTO T152 The apparatus is used to determine air content of fresh concrete. It consists of a flanged 7 liter capacity cylindrical vessel and cover assembly incorporating a pressure gauge air pump and valves. The meter measures up to 22% entrained air with an accuracy of ±0.25% at full scale. It is appropriate for aggregates size of maximum 50 mm. The instrument can be calibrated and it is supplied complete with straight edge and tamping rod. Weight (approx.) : 3,5 kg Curing Tank Product Code: UTC- 0191 Curing Tank UTC-0191/3 Set of 8 Upper Racks Standards: EN 12390 2, ASTM C31, C192, C511 Used for the determination of the depth of penetration of water to hardened concrete specimens under pressure. 3 and 6 specimen capacity models are available. The system can test 150x150x150 mm, 200x200x200 mm cube or 150x300mm cylinder specimens. Pressure to the sample, up to 10 bar with 0,2 bar precision is generated by way of compressed air applied to the integral water tank and controlled by a pressure regulator; with a pressure gauge. The penetration of water is measured through the burettes supplied complete with the system. The system comprises impermeability gaskets for every cell. The apparatus has to be fitted with the suitable air compressor with maximum working pressure of 10 bar. Dimensions : UTC- 0244/A 500x500x1800 mm (lxwxh) 95 kg UTC- 0244/B 500x500x1800 mm (lxwxh) 106 kg Vebe Consistometer Product Code: UTC-0195 Standards: EN 12350-3 The method is a mechanised variation of the slump test and includes determination of workabilityof fresh concrete by performing vibration to concrete after removal of the slump cone. The assembly is mounted upon a small vibrating table operating at a fixed amplitude and frequency. The time to complete the required vibration gives an indication of the concrete workability. The set consists of vibrating table, slump cone, graduated rod with transparent plate, filling cone and tamping rod. Dimensions : 220x280x710 mm (lxwxh) Weight (approx) : 87 kg 6

CONCRETE Specific Gravity Frame Product Code:UTC-0612 Specific Gravity Frame UTC-0612/1 Cradle UTC-0612/3 Water Tank Standards: EN 12390-7, BS 1881:114 Used in conjunction with a suitable electronic balance for specific gravity determination of fresh and hardened concrete and aggregates. A purpose built robust frame designed to support the electronic balance. The lower part of the frame incorporates a moving platform, which carries the water tank allowing the test specimens to be weighed in both air and water. The balance is not included in the test set and must be ordered separately. Any type of electronic balance fitted with under-bench weighing facility can be used. Lifting device, cradle and plastic water tank are supplied complete with frame. Dimensions : 400x500x970 mm (wxlxh) V Funnel Product Code: UTC- 0147 Standards: UNI 11042, Rilem report No. 23 The apparatus is used to evaluate the segregation resistance of freshly mixed self compacting concrete by the observation the flowing speed due to the difference of samples remaining period in the funnel. The test set consists of a stainless steel funnel placed vertically on a supporting stand. The discharge orifice is equipped with a lid, which can be momentarily opened. Dimensions : 570x920x300 mm (lxwxh) Weight (approx.) : 6 kg L Shape Box Product Code: UTC- 0147/B Standards: UNI 11043, Rilem report No. 23 The L Shape Box is used for evaluation of self compactability (confined flowability) of freshly mixed self compacting concrete. The box gives the opportunity to evaluate different properties, such as filling ability, passing ability and resistance to segregation. Dimensions : 700x200x600 mm (lxwxh) Weight (approx.) : 18 kg 7

CONCRETE Hydraulic Universal Testing Machine Product Code: UTM-3000 Hydraulic Universal Testing Machine 400 kn Capacity UTM-4000 Hydraulic Universal Testing Machine 600 kn Capacity Standards: EN 10002-1, ASTM 370 Universal hydraulic tensile test machine is designed to test the ferrous materials for structural values such as breaking point, breaking tensile, maximum load and maximum tensile. Apart from tensile tests, Universal test machines can also be used for standard test such as flexure and compression tests up to the capacity of the machine. Universal test machines are produced in two different models having 40 and 60 ton capacities. Maximum security is maintained by movement limiters on the lower jaw and piston as well as the safety check valves on the hydraulic system. Hydraulic power unit works silently. 0 40 mm round and flat samples can be tested with a user friendly hydraulic jaws that comply with all standards Strain measurement can be done by the electronic displacement transducer built in the machine or external extensometer fitted to the specimen. Load cell is used for load measurements. Strain measurements can be done directly from the extensometer fitted to the specimen. Tests can be done fully automatic by digital control unit or computer. Machine makes the test with the set pace rate and turns to start position automatically. The distance between the grips can be set by motor driven hand set system. Data Acquisition and Control System BC100 LCD graphics data acquisition and controls system BC100 is designed to control the machine and processing of data from load cells or pressure transducers and displacement transducers or extensometers installed on the universal testing machine frame. The easy to read LCD graphic display and touch-button data pad keys make the unit quick and straight forward to operate. All interactions with the measuring system are via the front control panel by using simple menu-driven procedures. The BC100 is contained in light alloy housing and its design satisfies the ergonomic requirements for various uses. The BC100 digital graphic display allows real time load vs. time graph. At the end of the test cycle, the results can be stored in the large memory or downloaded to a PC in UTEST software format. Dedicated software package is available for further online data processing, database management and certificate printing. Hydraulic Grips Hydraulic powered jaws completely stop the possibility of sample skidding from the jaw enabling for correct and definite strain measurements. Hydraulic jaws are very safe and user friendly. Hydraulic jaws come with jaw sets for pulling 0 40 mm flat and 6 50 mm diameter cylinder samples. The hydraulic jaw set has an independent hydraulic power unit with a working pressure of 300 bars. Material Test Software (MTP) Material testing software supplied standard with the machine is used to control and data processing. By using MTP Test control data input (test speed, maximum load and maximum elongation limits, etc.), sample data and user data can be entered. Test results can be displayed in metric, SI and US customary unit systems. Load- strain, stress- % strain can be displayed graphically. Can calculate max. load, max. starin, break load, break strain, young modulus, yield, etc. Can give an experiment report that consists of input data, graphics and test results. 8

CONCRETE Specifications UTM 3000 UTM 4000 Capacity 400 kn 600 kn Load Measurement Accuracy Displacement Measurement Accuracy Columns Diameter Vertical Test Distance Distance Between Columns Piston Stroke ± %1 ± %1 0,01 mm 0,01 mm Lower 80 mm 80 mm Upper 70 mm 80 mm Min 80 mm 80 mm Max 400 mm 400 mm 420 mm 600 mm 200 mm 200 mm Max Pressure Test Space Height Grisp Load 60 mm 70 mm 80 mm 80 mm 680 x 540 780 x 600 2500 mm 2800 mm 9

CEMENT Cement Flow Table EN Model Product Code: UTCM-0038 Cement Flow Table UTCM-0038/E Motorized Cement Flow Table UTCM-0037/10 Flow Mould UTCM-0037/11 Tamping Rod Standards: EN 459-2, 1015-3 General Properties Used for determining consistency of mortar, lime and cement specimens. Manual and motorized two models are available. The table is 300mm dia., 10mm drop height. The cone made of brass has dimensions of 100mm base dia. x 70mm top dia. x 60mm high. Dimensions : UTCM-0038 Manual ø255x290 mm UTCM-0038/E Motorized 450x1030x330mm Power : 180 W Weight (approx.) : UTCM-0038 Manual 12.7 kg UTCM-0038/E Motorized 50 kg Automatic Programmable and Manual Mortar Mixer Product Code: UTCM-0006 Automatic Programmable Mortar Mixer UTCM-0005/1 Mixing Bowl 5 liters UTCM-0005/2 Beater General Properties The mixer has been designed to mix mortars and cement pastes primarily to the requirements of standards. The mixing paddle has a planetary motion and is driven by a motor with a microprocessor based speed and program controller. The mixer can be operated either in an automatic or manual mode. When the mixer is used in the manual mode, the two mixing speeds can be changed by mean of the rocker switch, without switching off the motor. In the automatic mode any of the preset mixing programs may be selected. The mixing head rotates with speed of 62 and 125 r.p.m. and the beater 140 and 285 r.p.m. Automatic Sand dispenser is supplied with machine and thirty seconds after start of mixing sequence sand is automatically discharged in to the mixing bowl. The mixer is supplied complete with 5lt capacity bowl and the beater. 220 V, 50-60 Hz, 1 ph Dimensions : 300 555 610 mm (lxwxh) Power : 250 W Weight (approx.) : 56 kg 10

CEMENT Jolting Table Product Code:UTCM-0012 Jolting Table UTCM-0011 40x40x160 mm Feed Hopper Standards: EN 196-1, ISO 679 Jolting table is used for mould compacting of 40x40x160 mm cement specimens and consists of mould table seated on a rotating cam driven at 60 revolutions per minute. The table drop is 15.0 mm. The machine is equipped with counter which provides automatic shut off at end of preset drop numbers. Weight and dimensions of the jolting table fully comply with the requirements of EN 196-1 standard. Rapid mould lock and release system allows easy and quick operation. 220 V, 50-60 Hz, 1 ph Dimensions : 300x450x1030 mm (lxwxh) Power : 250 W r.p.m. : 60 Drop Height : 15 mm Weight (approx.) : 55 kg Curing Cabinet Product Code: UTCM-0013 Standards: EN 196-1 Used for curing tests of cement specimens. The curing cabinet provides 20 ± 1 C temperature and 95% humidity for cement specimens. Internal chamber and racks are made of stainless steel. The temperature is maintained at 20±1 C by a immersion heater and refrigerator unit which are supplied complete with cabinet. The cabinet is equipped with digital unit which controls and monitors the temperature. The humidity is maintained from 95% to saturation by water nebulisers and also monitored on digital unit. 220 V, 50-60 Hz, 1 ph Internal Dimensions : 700x900x1300 mm (lxwxh) External Dimensions : 850x1200x1900 mm (lxwxh) Weight (approx.) : 250 kg Le Chatelier Water Bath Product Code: UTCM-0025/F Standards: EN 196-3, pr EN ISO 9597 For use with Le Chatelier moulds for the determination of the soundness of cement paste. The bath is manufactured from corrosion resistant material, complete with a removable rack to hold up to twelve moulds. An adjustable controller for the immersion heater regulates the water temperature from ambient to boiling point. 220 V, 50-60 Hz, 1 ph Weight (approx.) : 20 kg 11

CEMENT Blaine Fineness Apparatus Product Code: UTCM-0041 Blaine Fineness Apparatus UTCM-0041/1 U Manometer Tube UTCM-0041/2 Cell with perforated disc UTCM-0041/3 Filter Paper (pack of 100) UTCM-0041/4 Manometer Liquid Bottle 250 mm Standards: EN 196-6 General Properties Used to determine the particle size of Portland cement, limes and similar powders expressed in terms of their specific surface. It consists of a stainless steel cell, perforated disc and plunger. A U-tube glass manometer is fitted to the steel stand. The set is complete with rubber aspirator and filter paper. Dimensions : 170x220x470 mm (wxdxh) Weight (approx.) : 8 kg Le Chatelier Test Set Product Code: UTCM- 0025 /S Le Chatelier Test Set UTCM- 0025 Le Chatelier Mould Standards: EN 196-3, EN ISO 9597 General Properties The soundness of cements and limes is determined using the expansion test with Le Chatelier moulds according to the relevant standard. The mould consists of a spring tensioned split cylinder 30 mm internal diameter x 30 mm high with two indicator stems which measure 150 mm from the points to the centre line of the cylinder and O ring. Standard weight and glass plate are supplied complete with the mould. Weight (approx.) : 30 gr 12

CEMENT Vicat Test Set Product Code:UTCM- 0028 Vicat Test Set EN Model UTCM- 0028/A Vicat Test Set ASTM Model UTCM- 0028/1 Vicat Apparatus UTCM- 0027/22 Vicat Mould EN Model UTCM- 0027/23 Vicat Mould ASTM Model UTCM- 0028/31 Initial Needle EN Model UTCM- 0028/21 Initial Needle ASTM Model UTCM- 0028/41 Final Needle EN Model UTCM- 0028/5 Consistency Plunger UTCM- 0028/6 Glass Plate Standards: EN 196-3, ASTM C187, AASHTO T129, T131 Used for determination of setting time and consistency of cement by Vicat Method. The test set comprises Vicat Frame, Vicat Mould, Initial and Final needles, glass plate and consistency plunger. Dimensions : 150 190 318 mm Weight (approx.) : 3 kg Cement Compression and Flexure Machine Product Code: UTCM- 6420 Cement Compression and Flexure Machine UTCM- 9030 Compression Jig Assembly for EN 196-1 UTCM- 9032 Compression Jig Assembly for ASTM C109 UTCM- 0019 Flexure Jig Assembly for EN 196-1 UTCM- 0021 Flexure Jig Assembly for ASTM C109 Standards: EN 196-1, ASTM C109 Fully Automatic cement compression machine has been designed according to the EN 196-1 and ASTM C109 standards for testing the flexure of the mortar prisms 40x40x160 mm and the compression on the 40x40mm pieces of prisms after the flexure test or 50 x50 mm mortar cubes. The BC100 is contained in light alloy housing and its design satisfies the ergonomic requirements for various use. The BC100 digital graphic display allows real time load vs time graph. At the end of the test cycle, the results can be stored in the large memory or downloaded to a PC in UTEST software format. Dedicated software package is available for further online data processing, database management and certificate printing. 13

CEMENT The main characteristics are: High resolution 65.000 points 240*120 pixel blue-white graphic LCD display Standalone full automatic testing capacity CPU card by microprocessor 32 bit ARM risk architecture Can make manual tests if required Large permanent memory up to 256 test results RS232C (optional Ethernet) connection at 57600 band One RS232 serial port for connecting either PC or printer for data transmission Two analogical channels, use for Load Cell or pressure transducer A sample type and dimensions can be entered respect to the standards 18 key touch membrane keyboard Easy to operate with 6 main function keys Language select; English, Turkish, Russian Can control two frames The main characteristics are: Dual stage pump 750 W power 25 liter oil capacity 60-100 mm/min fast approach speed On both frame the load is measured by load cell to get accurate test results. Both test chambers is supplied complete with round compression platens of 165 mm diameter with 245 mm vertical daylight. Compression Load Speed : 2400 N/s Flexure Load Speed : 50 N/s Model Capacity Accuracy Resolution Platen kn ±1% from kn kn dimensions mm 6420 2 kn to 15 kn / 15 kn / 250 kn 0,01kN / 0,01kN Flexure/Compression 25 kn to 250 kn 165mm/165mm Ram travel mm Max. vertical daylight mm Power W Overall dimensions (wxdxh) mm Weight approx. kg 50 mm/50 mm 245mm/245 mm 0,75 W/0,75 W 500x1030x1600mm 250 kg 14

CEMENT Cement Moulds Product Code:UTCM-0010 40x40x160 mm Three Gang Mould 11,6 kg UTCM-0080 50x50x50 mm Three Gang Cube Mould 3,6 kg UTCM-0051 70.7x70.7x70.7 mm Cube Mould 3,4 kg Standards: EN 196-1, ASTM C109, BS 4550 All the moulds have been manufactured from steel and all internal surfaces are machined. All dimensions and specifications comply with the related standards. The 40x40x160 mm mould has the surface hardness of minimum HV400. Le Chatelier Flask Product Code: UTCM-0003 Standards: EN 196-6, ASTM C188, AASHTO T133 Used to determine the specific gravity of hydraulic cement and lime. Glass flask 250ml capacity, with graduated neck from 0 to 1 ml and from 18 to 24 ml in 0.1 ml graduation with accuracy of 0.05 ml. Cement Flow Table ASTM Model Product Code: UTCM-0040 Cement Flow Table UTCM-0040/E Motorized Cement Flow Table UTCM-0040/10 Flow Mould Standards: ASTM C230 Used for determining consistency of mortar, lime and cement specimens. Manual and motorized two models are available. Dimensions : UTCM-0040/A Manual ø255x290 mm UTCM-0040/E Motorized 450x1030x330mm Power : 180 W Weight (approx.) : UTCM-0040/A Manual 12.7 kg UTCM-0040/E Motorized 50 kg 15

AGREGATE Abrasion Testing Machine Product Code: UTA- 0471 Abrasion Testing Machine UTA- 0472 Abrasive Sand Standards: EN 1341, 1342, 1343 General Properties Abrasion Testing Machine is designed for determining the resistance to abrasion / wear of natural stones and concrete products. The abrasion wheel is 70 mm thick and rotates with speed of between 75 r.p.m. the machine is equipped with digital counter which stops machine at the preset number of revolutions. Supplied complete with abrasion sand. 220 V, 50-60 Hz, 1 ph Weight (approx.) : 85 kg Shape Index Gauge Product Code: UTA-0542 Shape Index Gauge Standards: EN 933-4, DIN 4226 CNR No.95, NLT 354 General Properties Used to determine the shape factor of aggregates. Weight (approx.) : UTA-0542 Shape Index Gauge 0,4 kg Determination of Resistance to Freezing and Thawing Climatic Chamber Product Code: UTA-1428 Standards: EN 3449 General Properties Used in determining resistance to freezing and thawing. Provides freezing / thawing in air and also freezing in air / thawing in water. The chamber equipped with programmer for 9 programs in 9 steps for each program. Time can be arranged to 999 minutes for each step of program. Temperature range for cabinet is -25 C to +60 C. The control unit is electronic and equipped with digital display with 0,1 C temperature accuracy. The temperature distribution accuracy in the cabinet is not higher than 2 C. Cabinet provides heating from -25 C to +25 C in 60 minutes. 16

AGREGATE Software for data transfer to computer is supplied complete with the cabinet. The cabinet automatically arranges water level in reservoir. It is equipped with water pump which is used for water filling and discharging for soaking. The condenser of the cabinet is fitted with air cooled hermetic cooler. The gas used for cooler does not include CFC. 230 V, 50 Hz, 1 ph Internal Dimensions : 500x700x550mm (lxwxh) External Dimensions : 1750x850x1100 mm (lxwxh) Methylene Blue Test Set Product Code: UTA 0439 Methylene Blue Test Set UTA 0439/1 High Speed Stirrer UTA 0439/2 Kaolinite (500 gr) UTA 0439/3 Methylene blue (100 gr) UTA 0439/4 Filter Paper (pack of 100) UTA 0439/5 Burette 50 ml UTA 0439/6 Plastic Beaker 3000 ml UTA 0439/7 Glass Rod Standarts: EN 933-9, NF P 94-068, UNE 83 180, UNI 8520-15 Methylene Blue Test Set is used for determining clay content in the fines fraction of the aggregates. Set consists of 400/600 r.p.m. High Speed Motor and stirring propeller, 3000ml capacity plastic beaker, 100gr methylene blue, 500gr kaolinite, Filter Papers (pack of 100), glass rod, 50ml glass burette, burette holder and burette stand. 220 V, 50-60 Hz, 1 ph Micro-Deval Testing Machine Product Code: UTA 0524 Standarts: EN 1097-1, NF P18-572, P18-576, CNR No.109, UNE 83115 Micro Deval Testing Machine used to determine the resistance to wear of 25-50mm size aggregates. The machine consists of a steel frame, four stainless steel cylinders, and 25kg of 10 mm diameter stainless steel spheres and automatic digital counter which allows machine to stop automatically at the preset number of revolutions. Stainless steel Ø200*154 drums are rotating at speed of 100 (±5) r.p.m. 220 V, 50-60 Hz, 1 ph Dimensions : 640x1200x350 mm (lxwxh) Power : 750W Weight (approx.) : 150 kg 17

AGREGATE Skid Resistance and Friction Tester (Skid Tester) Used for the measurement of surface friction properties, the apparatus is suitable for both site and laboratory applications and for Polished Stone Value tests using curved specimens from accelerated polishing tests. Slider lifting system integrated in the pendulum foot, which guarantees reliable adjustment operations. Product Code: UTA-0190 Standards: EN 1097-8, ASTM E103, BS 812:144, NLT 174, CNR No. 105, 140, NF P18-578, NF P18-575 Skid Tester provides following features: Easy and reliable height adjusting system New low friction release mechanism of the pendulum arm for better accuracy. Dimensions : 790x760x320 mm (lxwxh) Weight : 34 kg AAV Abrasion Machine Product Code: UTA-0522 Standards: EN 1097-8, BS 812 The test provides a measure of the resistance of aggregate to surface wear by abrasion. The abrasion machine consists of a flat circular cast iron grinding lap 600 mm dia. which rotates in a horizontal plane at a speed of 28/30 r.p.m. The abrasive sand is fed across the surface of the specimen samples through a special funnel. The machine is supplied complete with two specimen moulds, two trays, two flat plates, weights and clamps. Weight : 200 kg Accelerated Polishing Machine Product Code: UTA- 0525 Standards: EN 1097-8, EN 1341, 1342, 1343 Used to measure the resistance of road stone to the polishing action of vehicle tires on a road surface. The machine consists of road wheel rotating in the speed of between 315 and 325 r.p.m. The electric motor of the machine is 370W and fan-cooled. Machine supplied complete with road wheel, side plate, rubber rings, abrasive feed mechanism, corn emery, flour emery, set of 4 specimen mould and 2 mould plates. 230 V, 50 Hz, 1 ph Dimensions : 740x720x1520 mm (lxwxh) Weight : 175 kg 18

AGREGATE Sand Equivalent Test Set Product Code : UTA-0050 Sand Equivalent Test Set EN Model UTA-0050/A Sand Equivalent Test Set ASTM Model Standards: EN 933 8, ASTM D2419, AASHTO T176, UNI 8520 15, UNE 83131, CNR No. 27 Sand Equivalent Test Set is used to determine the fines of aggregates. The Sand Equivalent Test Set comprises 4 measuring cylinders, irrigator tube, weighted foot assembly, siphon assembly, rubber stopper, funnel, rubber hose, pinch clip, 1 liters glycerol, 5 lt capacity sand jar and a carrying case. Set conforming to ASTM is same as EN Set except for Measuring Cylinders which are totally graduated. Weight: 4,6 kg Los Angeles (Determination of Resistance to Fragmentation) Product Code: UTA 0500 Los Angeles Abrasion Machine UTA 0500/A Los Angeles Abrasion Machine with safety cabinet UTA 0505 Set of 12 abrasive charges conforming to ASTM UNI CNR UTA 0505/A Set of 11 abrasive charges conforming to EN Standards: EN 1097-2, ASTM C131, C535, NF P18-573, UNE 83114, UNI 8520-19, CNR No.34 Los Angeles Abrasion Machine is used for determination of aggregates resistance to fragmentation. The machine consists of an electronic control unit and a rolled steel drum having an inside diameter of 711 mm and internal length 508 mm. The drum is rotated at a speed of between 31 and 33 r.p.m. The internal shelf is provided with the machine is conforming to ASTM and EN standards. The machine is equipped with automatic counter, which allows stopping when the preset number of revolutions is completed. There is a steel tray supplied with machine for easy discharge of specimen. Standard model can be upgraded with safety cabinet where Los Angeles Machine will be placed. In this case electronic control unit will be installed on the safety cabinet. The cabinet is equipped with electric safety device which automatically stops the rotation of the drum when the door is opened, conforming to CE directives. 220 V, 50 60 Hz, 1 ph Dimensions : 1000x900x1000 mm (wxlxh) Power : 750 W 19

AGREGATE Testing Sieves Standards: EN 933-2, ISO 3310-1, ISO 3310-2, ISO 565, ASTM E11 Utest Material Testing Equipment proposes a complete range of testing sieves. In this field we cooperate with Endecotts who is the worlds leading manufacturer of quality laboratory test sieves. The only test sieve manufacturer to meet the exacting standards of BS 410 ISO 3310/1 & 2, ASTM E.11 and accredited with the British Standard Kitemark. All test sieves are manufactured to National and International Specifications and are supplied with a Certificate of Compliance. Each sieve is individually serial numbered, ensuring full traceability. Endecotts sieves are made with only the highest quality materials and are available in diameter sizes of 38, 100, 150, 200, 250, 300, 315, 350, 400 and 450mm, as well as 3,8,12 or 18 inches. Woven wire mesh sieves are available in frame materials of either brass or stainless steel with larger diameter sieves also available in plated steel. Thermometers We propose different model digital, dial, glass and Min-Max thermometers, which cover practically all applications in the construction industry. Product Code: Digital Thermometers UTG- 1226/A -50 - +150 C UTG- 1226/B -50 - +260 C UTG- 1226/C -50 - +300 C Glass Thermometers UTG- 1199-10 - +60 C UTG- 1199-10 - +110 C UTG- 1199-10 - +160 C UTG- 1199-10 - +310 C Dial Thermometers UTG- 1207-30 - +60 C UTG- 1212 0 - +200 C UTG- 1213 0 - +260 C Min-Max Thermometer UTG- 1215/1-20 - +50 C Min-Max Hygrometer, Thermometer (Digital) UTG- 2220 20

AGREGATE Water Bath Product Code: UTA- D1411/1 14 liters UTA- D1411/2 30 liters UTA- D1411/3 48 liters Ideal for general laboratory use including Marshall tests. Internal surfaces of polished stainless steel and housed in a sheet steel insulated outer case. They are offered in different sizes. Thermostatic heat controlled baths are supplied complete with cover. 220 V, 50 60 Hz, 1ph Muffle Furnace Product Code: UTA- 1207 Capacity : 7.3 liters Maximum operating temperature : 1200 C Temperature Range : 1150 C Rise Time : 35 minutes Internal Dimensions : 250x200x140 mm (wxlxh) External Dimensions: 580x550x650 mm (wxlxh) Power : 220 VAC / 2 kw Muffle Furnaces are widely used for determining various properties of construction materials. Vertical lift door directs heat away from user and saves counter space. A safety interlock switch disconnects power when the door is open. Vertical lift door has maximum access with minimum head room for easy loading and unloading. Programmable models are optional. 230 V, 50-60 Hz, 1 ph 21

AGREGATE U Shape Box Product Code: UTC- 0147/D Standards: UNI 11044, Rilem report No. 23 General Properties The U Shape Box is used to determine the confined flowability and the capacity of SCC concrete to flow within confined spaces. The box is made of galvanized steel frame consisting of four 10 mm diameter and three 13 mm diameter bars. Dimensions : 200x280x680 mm (lxwxh) Weight (approx.) : 25 kg Digital Balances General Properties These precise, economical and very easy to use balances are ideal for both central and site laboratories. Available in various model, capacity and precision. Product Code: UTG- 0613/A Moisture Analyzers 0,0001 gr x 50 gr UTG- 0613/B Analytical Balance 0,1 mg x 220 gr UTG- 0630 Precision Balance 0,1 gr x 6 kg UTG- 0631/C Precision Balance 0,5 gr x 30 kg UTG- 0648 Platform Balance 5 gr x 150kg Laboratory Hardware Product Code: Specimen Trays UTG- 1305 27x46x4 cm UTG- 1305/1 26x41x4 cm UTG- 1305/2 25x36x4 cm UTG- 1305/3 23x33x4 cm UTG- 1305/4 17x27x4 cm Spatulas UTG- 1630 Small UTG- 1632 Medium UTG- 1633 Large Brushes UTG- 1680 Hair Brush UTG- 1685 Wire Brush UTG- 1673/G Double ended 3 hair/ wire brush Scoops UTG- 1601 Small UTG- 1602 Medium UTG- 1603 Large 22

AGREGATE Laboratory Glassware Product Code: Beaker UTG-1071 Beaker 50 ml UTG-1072 Beaker 100 ml UTG-1073 Beaker 250 ml UTG-1074 Beaker 500 ml UTG-1075 Beaker 1000 ml UTG-1075/1 Beaker 2000 ml Measuring Cylinder UTG 1002 Measuring Cylinder 50 ml UTG 1003 Measuring Cylinder 100 ml UTG 1004 Measuring Cylinder 250 ml UTG 1005 Measuring Cylinder 500 ml UTG 1006 Measuring Cylinder 1000 ml UTG 1007 Measuring Cylinder 2000 m A comprehensive range of laboratory glassware is available. Vacuum Dessicator UTG-1112 Vacuum Dessicator Ø210 mm UTG-1112/A Vacuum Dessicator Ø240 mm UTG-1113 Vacuum Dessicator Ø300 mm Volumetric Flask UTG-1058 Volumetric Flask 50 ml UTG-1059 Volumetric Flask 100 ml UTG-1060 Volumetric Flask 250 ml UTG-1061 Volumetric Flask 500 ml UTG-1062 Volumetric Flask 1000 ml UTG-1063 Volumetric Flask 2000 ml Pycnometer UTG-1126 Pycnometer 50 ml UTG-1126 Pycnometer 100 ml UTG-1126 Pycnometer 250 ml UTG-1126 Pycnometer 500 ml UTG-1126 Pycnometer 1000 ml UTG-1126 Pycnometer 2000 ml Conical Flask - Erlenmayer UTG-1030 Conical Flask - Erlenmayer 100 ml UTG-1031 Conical Flask - Erlenmeyer 300 ml UTG-1032 Conical Flask - Erlenmayer 500 ml UTG-1033 Conical Flask - Erlenmayer 1000 ml UTG-1034 Conical Flask - Erlenmayer 2000 ml Dessicator UTG-1110 Dessicator Ø210 mm UTG-1110/A Dessicator Ø240 mm UTG-1111 Dessicator Ø300 mm Porcelain / Mortar and Pestles Product Code: UTG- 1170 Evaporating Dish Ø10 cm UTG- 1171 Evaporating Dish Ø12 cm UTG-1180/A Porcelain Mortar and Pestle Ø12 cm UTG-1180/B Porcelain Mortar and Pestle Ø16 cm UTG-1187 Porcelain Crucible 25 ml 23

AGREGATE Sieve Shaker Product Code: UTG-0411 UTG-0411/Z Frequency controlled Standards: EN 932-5, ISO 3310-1 The sieve shaker imparts a circular motion to the material being sieved so that it makes a slow progression over the surface of the sieve. At the same time a feature of the rapid vertical movement agitates the sample which helps to clear the sieve apertures and avoid them blinding. The shaker is fitted with timer which can be pre-set for any duration up to 60 minutes. This unit will accept 200mm and 300mm diameter sieves. Wet sieving kits in the appropriate sizes may be used with this shaker. 220 V, 50-60 Hz, 1 ph Dimensions : UTG-0411 510 510 370 mm (wxlxh) UTG-0411/Z 510 510 370 mm (wxlxh) Weight (approx.) : UTG-0411 86 kg UTG-0411/Z 86 kg Drying Oven Product Code: UTG-1390 50 liters UTG-1391 120 liters UTG-1396250 liters UTG-1397 500 liters UTG-1398 750 liters Standards: EN 932-5, EN 1097-5, ASTM C 127- C136-D558, D559, D560, D698, D1557, D1559, BS 1377:1-1924:11 UNE 103300 These ovens have been designed for drying asphalt, soil, rock, concrete and aggregate specimens. The models we propose are available in 50,120,250,500,750 liter capacities. Temperature range is from ambient to 250 C with precision of 1 ºC. The interior is made from stainless steel and the exterior is robustly constructed from sheet steel finished in powder coated paint. The insulated chambers are made from clad mild steel. All units are fan circulated and fitted with direct reading digital control unit. 2,3 or 4 shelves supplied according to oven capacity. 220V / 50Hz or 380V / 50Hz Weight (approx.) : UTG-1390 35 kg UTG-1391 50 kg UTG-1396 70 kg UTG-1397 100 kg UTG-1398 140 kg 24

AGREGATE Vacuum Pump Ideal for field and laboratory use to produce vacuum. 220 V, 50-60 Hz, 1 ph Casagrande Product Code: UTS- 0030/E Hand Operated Liquid Limit Device BS1377:2 UTS- 0030/F Hand Operated Liquid Limit Device ASTM D4318 UTS- 0031/E Motorized Liquid Limit Device BS1377:2 UTS- 0031/F Motorized Liquid Limit Device ASTM D4318 UTS- 0032/P Plastic Grooving Tool BS1377:2 UTS- 0032/AP Plastic Grooving Tool ASTM D4318 UTS- 0032/A Metal Grooving Tool ASTM D4318 UTS- 0033 Brass Grooving Tool UNI 10014 Standards: ASTM D4318, BS 1377:2, UNE 7377, 7002, UNI 10014 Used to determine the moisture content at which clay soils pass from a plastic to a liquid state. Comprises removable brass cup, adjustable crank and cam mechanism, blow counter, and base. Two versions available: hand operated and motor operated. Supplied complete with grooving tool according to the reference standard. The grooving tool has to be ordered separately. Sand Cone Density Set Product Code: UTS -0129 Sand Cone Set 6.5 UTS-0133 Sand Cone Set 12 UTS-0130/2 Plastic Sand Jar 5 lt Standards: ASTM D1556, AASHTO T191 For the on site determination of the degree of compaction. Complete set includes double cone, plastic sand jar 5lt capacity and metal tray. 25

AGREGATE Sand Equivalent Shaker General Properties The shaker is used for uniform shaking of Sand Equivalent Measuring Cylinders. Provides shaking action at the specified rate and stroke. Supplied complete with built in timer. Product Code: UTA-0056 Sand Equivalent Shaker UTA-0056/A Sand Equivalent Shaker with safety cover Standards: EN 933 8, ASTM D2419, AASHTO T176, UNI 8520 15, UNE 83131, CNR No. 27 220V, 50 60 Hz, 1 ph Stroke Travel : 200mm ± 1mm (EN) 203.2mm ± 1.02mm (ASTM) Rate : 180mm ± 2/min (EN) 175mm ± 2/min (ASTM) Dimensions : UTA 0056 220x600x320 mm (wxlxh) Weight: 24,7 kg UTA 0056/A 240x800x340 mm (wxlxh) Weight: 27,5 kg Flakiness Sieves General Properties Used to determine particle size shape or geometrical characteristics of the aggregates. Each sieve made from heavy gauge steel sheets in dimensions specified in the standards and coated with electrostatic paint. Product Code: UTA-0415/1, UTA-0415/2, UTA-0415/3, UTA-0415/4, UTA-0415/5, UTA-0415/6, UTA-0415/7 Standards: BS 812 Stroke Travel : 200mm ± 1mm (EN) 203.2mm ± 1.02mm (ASTM) Rate : 180mm ± 2/min (EN) 175mm ± 2/min (ASTM) Dimensions : UTA 0056 220x600x320 mm (wxlxh) Weight: 24,7 kg UTA 0056/A 240x800x340 mm (wxlxh) Weight: 27,5 kg Product Code Slot Size Weight Dimensions UTA-0415/1 4.9 mm slot size 1.6 kg 320x195x30mm UTA-0415/2 UTA-0415/3 7.2 mm slot size 1.7 kg 340x215x40mm 10.2 mm slot size 1.8 kg 360x235x50mm UTA-0415/4 14.4 mm slot size 2.0 kg 380x255x60mm UTA-0415/5 19.7 mm slot size 2.1 kg 400x275x70mm UTA-0415/6 26.3 mm slot size 2.6 kg 420x295x80mm UTA-0415/7 33.9 mm slot size 3.1 kg 470x330x100mm 26

AGREGATE Product Code : UTA-0418/1 UTA-0418/2 UTA-0418/3 UTA-0418/4 UTA-0418/5 UTA-0418/6 UTA-0418/7 UTA-0418/8 UTA-0418/9 UTA-0418/10 UTA-0418/11 UTA-0418/12 UTA-0418/13 Standards: EN 933-1, NF P18-561, UNI 8520, NLT 354 Used to determine the flakiness index of the aggregates. Consists of electrostatic painted frame and 5 mm diameter stainless steel bars. Dimensions : 380x320x80 mm Grid Sieves Product Code Aperture (mm) Weight (kg) Product Code Aperture (mm) Weight (kg) UTA-0418/1 2,5 3,3 kg UTA-0418/2 3.15 3.3 kg UTA-0418/3 4 3.8 kg UTA-0418/4 5 3.8 kg UTA-0418/5 6.30 3.7 kg UTA-0418/6 8 3.6 kg UTA-0418/7 10 3.4 kg UTA-0418/8 12.5 3.2 kg UTA-0418/9 16 4 kg UTA-0418/10 20 3.2 kg UTA-0418/11 25 3.2 kg UTA-0418/12 31.5 2.9 kg UTA-0418/13 40 2.7 kg Automatic Soil Compactor Product Code: UTS -8502 Automatic Soil Compactor UTS -8502/1 ASTM Rammer UTS -8502/2 EN Rammer Standards: EN 13286-2, EN 13286-47, ASTM D698, D1557, AASHTO T99, T180, T193, BS 1377 4, 1990 The Automatic Soil Compactors is designed to provide a fully automatic uniform compaction of Standard / Modified and CBR specimens assuring conformity with the reference standard. Compactor is equipped with programmable digital counter which allows machine to stop at the preset numbers of blows. The height and weight of the rammer is adjustable to suit test requirements. The drop weight is adjustable to 300 mm drop height and is also adjustable to 450 mm drop height. The rammer is circular faced with a 50 mm diameter and is adjustable to 2.5 kg. or 4.5 kg. An automatic blow pattern ensures effective compaction for each layer of soil and the rammer travels across the mould. The table rotates the mould in equal steps and the number of blows per layer can be set at the beginning of the test by the digital counter. User defined blow number and in-out distribution is also available. A standard proctor / CBR switch, emergency stop and start push buttons are located beside the blow counter. 220 V, 50-60 Hz, 1 ph Drop Height : 300 mm, 305 mm, 450 mm, 457 mm (adjustable) Rammer Weight : 2.5 kg, 4.5 kg Dimensions : 640x340x1506 mm (wxlxh) Power : 370 W Weight (approx.) : 135 kg 27

AGREGATE Sand Replacement Test Set Product Code: UTS -0125 Sand Replacement Test Set 100 mm UTS -0126 Sand Replacement Test Set 150 mm UTS -0127 Sand Replacement Test Set 200 mm Standards: BS 1377:9, 1924:2 For the on site determination of the degree of compaction. Complete set consists of pouring cylinder, calibration container and tray. The sand pouring cylinder is made of cast aluminium and precisely machined; the calibration container and tray are made of plated sheet steel. The test set is available in three different sizes. Standard / Modified Proctor Mould and Rammer Product Code: UTS -0070 Standard Proctor Mould UTS -0071 Modified Proctor Mould UTS -0076 Standard Proctor Rammer UTS -0077 Modified Proctor Rammer Standards:ASTM D558, D698, D1557, AASHTO T99, T134, T180 Moulds are used for determining the relationship between the moisture content and density of compacted soil. Made of plated steel, includes collar, mould body and base plate. Rammers are used to compact the soil sample in the Proctor Moulds. Made of plated steel. Guide sleeve with vent holes. Different models are available conforming to the relevant standards. Product Code Description Int. dia. mm Rammer dia. mm Height mm Weight kg UTS -0070 Standard Proctor Mould 101.6 ------------- 175 4,3 UTS -0071 Modified Proctor Mould 152.4 ------------- 175 7 UTS -0076 Standard Proctor Rammer ----------- 50,8 538 4,36 UTS -0077 Modified Proctor Rammer ----------- 50,8 805 7,55 28

ASPHALT Marshall Stability Machine Product Code: UTAS-0038 Marshall Stability Machine UTAS-0033 Breaking Head 100 mm UTAS-0033/C Breaking Head 150 mm UTAS-0078 Indirect tensile assembly 100 mm Standards: EN 12697-12, EN 12697-23, EN 12697-34 The Marshall Stability Test Machine is used to determine the load and flow values of bituminous mixtures. The UTAS-0038 is composed by a robust and compact two column frame with adjustable upper cross beam driven by an electromechanical ram with a maximum capacity of 50 kn and a data acquisition and processing system. The machine can be hand operated by a lateral hand wheel for calibration purposes. The mechanical jack raises the lower cross beam at a constant speed of 50,8 mm/min. The limit switches are provided for the both, bottom and top limit of travel. The measuring system consists of a 50 kn capacity strain gauge load cell is fitted to the upper cross beam to read stability values and 25 mm x 0.001 mm displacement transducer fitted to the Breaking Head. Data Acquisition And Control System LCD graphics data acquisition and controls system BC100 is designed to control the machine and to process the data from linear potentiometric transducers, Load Cells, installed on the CBR machine frame. The BC100 is contained in a light alloy housing and its design satisfies the ergonomic requirements for various use. The BC100 digital graphic display allows real time flow / stability graph and value readout. At the end of the test cycle the results can be stored in the large memory or to a PC by using UTEST Marshall software. Dedicated real time Marshall software package is available for testing and further data processing, database management and certificate printing. The main characteristics are: High resolution: 65.000 points Large permanent memory up to 100 test results RS232C (optional Ethernet) connection at 57600 band Language select; English, Turkish, Russian CPU card by microprocessor 32 bit ARM risk architecture One RS232 serial port for connecting either PC or printer for data transmission Two analogical channels, one for Load Cell and one for Linear potentiometric transducer Blue-white graphical display 18 key touch membrane keyboard 6 main function keys 50 kn Load Cell, flow transducer, breaking head, calibration handle, RS232 cable and PC software are supplied complete with the machine. 220 V, 50 60 Hz, 1 ph Dimensions : 470x610x950 mm (wxlxh) Power : 1100 W Weight (approx.) : 88.5 kg 29

ASPHALT Asphalt Mixer (5lt) Product Code: UTAS-0005 Asphalt Mixer 5 liter capacity UTAS-0005/H Isomantle Heater for 5 liter capacity mixer UTAS-0005/1 Mixing Bowl 5 lt. UTAS-0005/2 Mixing Whisk Standards: EN 12697-35 The 5 liter capacity mixer is designed for mixing of samples to be used for mechanical tests as for example compaction, indirect tensile, Marshall etc. The bituminous mix must be prepared at prescribed temperature for this reason the mixer can equipped with thermostatically controlled heater. The mixing head rotates in the speed of 62 and 125 r.p.m. and the beater 140 and 285 r.p.m. The user can choose speeds easily by using switch fitted to the machine. The mixer is supplied complete with 5lt capacity bowl and the beater. Isomantle heater should be ordered separately. 220 V, 50-60 Hz, 1 ph Dimensions : UTAS-0005 300 555 610 mm (w l h) Weight : 54 kg Asphalt Mixer (10lt) Product Code: UTAS-0072 Asphalt Mixer 10 liter capacity UTAS-0072/H Isomantle Heater for 10 liter capacity mixer UTAS-0072/1 Mixing Bowl 10 lt. UTAS-0072/2 Mixing Whisk Standards: EN 12697-35 The 10 liter capacity mixer is designed for mixing of samples to be used for mechanical tests as for example compaction, indirect tensile, Marshall etc. The bituminous mix must be prepared at prescribed temperature for this reason the mixer can equipped with thermostatically controlled heater. The mixing head rotates in the 11 different speed positions from 10 to 240 r.p.m. and the beater from 20 to 480 r.p.m. The user can choose speeds easily by using switch fitted to the machine. The mixer is made of stainless steel and supplied complete with 10lt capacity bowl and the beater. Isomantle heater should be ordered separately. 220 V, 50-60 Hz, 1 ph Dimensions : UTAS-0072 650 600 380 mm (w l h) Weight : 100 kg Bitumen Penetrometer Product Code: UTAS-0101 Semi Automatic Penetrometer UTAS-0113 Penetration Needle; UTAS-0109 Transfer Dish; UTAS-0110 Penetration Tin Standards: EN 1426, ASTM D5, AASHTO T 49 Used for determination of penetration of bituminous samples under constant load, time and heat. The penetrometer consists of cast iron base with levelling screws, digital penetration measurement gauge 0.01 mm precision - Release button - Automatic zeroing. Needle, transfer dish and penetration moulds are supplied complete with the apparatus. The number of penetration tins can be increased upon to request. 220 V, 50-60 Hz, 1 ph Weight (approx.) : UTAS-0101 9,7 kg 30

ASPHALT Ductility Testing Machine Product Code:UTAS -0140 Ductility Testing Machine UTAS-2030 Ductility Testing Machine with Cooling Machine UTAS-0141 Ductility Mould UTAS-0142 Ductility Mould Plate Standards: EN 13398, ASTM D113, AASHTO T51, NF T66-006, NLT 126 The device is used for determining the ductility of bituminous materials by measuring the elongation of briquette mould with molten bitumen in it. It is designed for testing 3 specimens simultaneously. Internal tank is made of stainless steel. The bath is fitted with an immersion heater in order to obtain, in normal conditions, the 25 C test temperature using, as stabilizing element, the cold water circulation in the stainless steel interspace. Comprises digital control unit and circulator to maintain the homogenous water temperature. The device is supplied complete with 3 sample preparation plates and 3 briquette moulds. The cooling unit can be ordered separately. 220 V, 50-60 Hz, 1 ph Dimensions : 360x2150x340 mm (wxlxh) Power : 350W Weight (approx.) : 150kg Softening Point (Ring and Ball) Apparatus Product Code: UTAS-0145 Ring and Ball Apparatus UTAS-0145/C Hot Plate with Magnetic Stirrer UTAS-0145/1 Ring UTAS-0145/2 Steel Ball UTAS-0145/3 Ball centering guide UTAS-0145/4 Glass Beaker UTAS-1200/1 Thermometer Standards: EN 1427, ASTM D36, AASHTO T 53 Used for determining softening point of bituminous materials by ring and ball method. Softening Point (Ring and Ball) Apparatus comprises hotplate with magnetic stirrer, 2 steel balls, ball centering guide, 2 rings, glass vessel and thermometer. 220 V, 50 60 Hz, 1 ph 220 V, 50-60 Hz, 1 ph Weight (approx.) : 4,5 kg 31

ASPHALT Loss on Heating Oven (TFOT) Product Code: UTAS -0160 Loss on Heating Oven UTAS 0160/1 Sample container Standards: EN 12607-2, EN 13303, ASTM D6, D1754, AASHTO T47, T179, BS 2000, CNR No.50, UNE 7110, NF T66-011 Test method is used for determining the loss in mass, the effect of heat and air on a film of semisolid bituminous materials. Loss on Heating / Thin Film Oven is supplied complete with rotating shelf and 9 sample containers. 220 V, 50 60 Hz, 1 ph Internal Dimensions : 350x350x500 mm (wxlxh) External Dimensions : 690x410x660 mm (wxlxh) Power : 40 W Weight (approx.) : 38 kg "Vialit Plate" Adhesion Test Apparatus Product Code: UTAS- B0178/A Standards: EN 12272-3, NF P98-274-1 General Properties Vialit plate adhesion test apparatus is used to assess the adhesion property of aggregates to bitumen. The apparatus consists of a metal basement with three vertical pointed rods to hold the test plate; vertical rod 50 cm high with a shot at the upper end for the steel ball to drop; a 512 g steel ball; 6 metal test plates, hand operated rubber lined roller with lead shots ballast. Weight : 40 kg Core Drilling Machine Product Code: UTAS -0202 Core Drill with petrol engine UTAS 0202/1 Coring Bit 50mm dia; UTAS 0202/2 Coring Bit 100mm dia. UTAS 0202/3 Coring Bit 150mm dia. General Properties Standards: EN 12697-27 The compact and portable core drilling machine is designed to cut cores up to 150 mm diameter from concrete, asphalt and similar hard construction material. The machine comprises a vertical support column which carries the drill head/motor assembly. The motor assembly comprises 3 Hp petrol engine. A ball screw mechanism enables close control over drilling pressure and rapid return when drilling is completed. Water spraying assembly is mounted on the machine. The complete assembly supplied on a rigid wheel mounted metal base frame with leveling and fixing facility during the operation. Core Bits should be ordered separately. Weight (approx.) : 80 kg 32

ASPHALT Centrifuge Extractor Product Code:UTAS-2212 Centrifuge Extractor 1500 gr. capacity UTAS-0022/1 Filter Paper for 1500 gr. UTAS-2312 Centrifuge Extractor 3000 gr. capacity UTAS-0023/1 Filter Paper for 3000 gr. Standards: EN 12697-1, ASTM D2172, AASHTO T164A The centrifuges are used for the determination of bitumen percentage in bituminous mixtures. All models comprise a removable precision-machined rotor bowl housed in a cylindrical aluminium box. They are driven by an electric motor fitted with AC drive (inverter) with the double function of speed control up to 3600 r.p.m. regardless of the frequency (50 or 60 Hz) and electrical braking. The rotating unit is suspended on the base by four calibrated springs, which assure a perfect stability all over the test. The cover is precisely machined and fitted with solvent resistant gasket to avoid leakages. The control panel includes: Start/Stop button, speed control knob. The Centrifuge Extractor is available in two, 1500 g and 3000 g capacity models. The apparatus is supplied complete with 100 filter papers. 220 V, 50 60 Hz, 1 ph Manual Marshall Hammer Assembly Automatic Marshall Compactor Product Code:UTAS-4012 Automatic Marshall Compactor Standards: EN 12697-10, 12697-30 This automatic compactor provides a consistent and even degree of compaction. The unit incorporates a compaction pedestal, comprising a laminated hardwood block secured to a concrete base by a 300 mm square x 25 mm thick steel plate. The mechanism lifts the 4550 g ±20 g hammer and automatically releases it at the specified height of 460mm ±3mm. The conveniently positioned control fascia panel comprises of a mains light, start and stop buttons and a direct reading counter used to set the required number of blows. Dual rammer pick-ups have been incorporated reducing stress on the machine's internal mechanism. Particular attention has been paid to operator safety by the inclusion of various in-built safety features. Dimensions : 550x550x1950 mm (wxlxh) Power : 370 W Weight (approx.) : 224 kg 33

ASPHALT Saybolt Viscometer Product Code: UTAS-0121 Saybolt Viscometer UTAS-0125/T Set of Glass Thermometers, 6 pcs. (19-27C, 34-42C, 49-57C, 57-65C, 79-87C, 95-103C) UTAS-0125/1 Saybolt Viskosity Flask 60 ml Standarts: ASTM D88, AASHTO T72 General Properties Viscometer is 2 sample testing capacity with digital display. The apparatus is supplied complete with viscosity tube, thermometer set and 2 saybolt viscosity flasks. 220 V, 50 60 Hz, 1 ph Dimensions : 260x420x500 mm (wxlxh) Power : 500 W Weight (approx.) : 10 kg Marshall Mould Product Code:UTAS-0057 Marshall Mould (Base plate, mould body, filling collar) To produce the Marshall specimens with automatic or hand compactors. Comprising base plate, mould body and collar. Weight (approx.) : 4kg Universal Extruder 34