MAKING GREEN WORK. 2014 BIO-CIRCLE System Bio-Circle Surface Technology GmbH BIO-CIRCLE komb Fly12 2014 EN Subject to technical alterations. Any liability for misprints excluded. All texts and illustrations contained herein are copyrighted. VOC free! Natural, organic parts washing. The perfect solution to every requirement. bio-chem.de bio-circle.de
2 BIO-CIRCLE The trendsetting parts-washing system designed by bio-chem. The BIO-CIRCLE is comfortable to use and ecofriendly, and it offers the optimal solution to any cleaning requirement. It is easy to use; even heavily contaminated parts are cleaned in a fast, secure and eco-friendly way; the VOC free liquid has a very long lifetime; the BIO-CIRCLE cost-effectiveness cannot be beaten. The BIO-CIRCLE runs without solvents and helps you meet the high requirements of the currently effective solvent regulation* (Germany: 31. BImSchV [31st Federal Immission Control Regulation], Austria: VOC-Anlagen-Verordnung [VOC Plant Regulation] VAV). Replace your cold cleaner parts washer with the BIO-CIRCLE and make an active contribution towards increasing occupational safety for your staff, and towards protecting the environment. Environmental protection and quality Conscious that we bear responsibility for the environment, as long ago as 1996 we implemented a fully integrated environmental management system, which was certifi ed by LRQA in accordance with the globally valid DIN ISO 14.001 standard. As an ecologically oriented enterprise we not only attach greatest importance to optimum product performance but also to optimum environmental compatibility. The certifi cation attests that we deal sensibly with resources, with raw materials for the production as well as with energy and water, and that we also handle waste responsibly. In our opinion, voluntary participation in this environmental management system is the right way towards continuous improvement of environmental protection, says Birgit Große, GM Germany. For documentations, certifi cates, application examples, and videos please refer to our web page www.bio-circle.de. We will be happy to provide you with the documents required also by post, fax or E-mail. * The solvent regulation governs the requirements concerning surface cleaning devices. The operators of such devices have to give proof of their observing the established VOC emission limit values because solvent fumes are hazardous to health and pollutive, and they carry a fire- and explosion hazard.
33 BIO-CIRCLE Mini BIO-CIRCLE Maxi BIO-CIRCLE GT Compact Parts washing is supposed to be simple and safe. What matters here are reliable aides. BIO-CIRCLE offers an extensive range of parts washing devices that meet even the highest requirements on ease of use, reliability, and suitability for daily use. The advantages: Ergonomic, user-friendly design VOC free! Sturdy, robust device made from synthetic material (PE), no risk of corrosion Triple fi lter system: coarse fi lter, fi ne fi lter, magnet Particularly maintenance-friendly the control box contains the entire control- and pump system, and can be exchanged easily and fast in case of malfunctions. Furthermore the electricity is splash-proof. The tank is double-walled which affects as isolation. Loss of heat is reduced. You re welcome to benefit from our long experience in the field of natural, biological parts washing. Our trained staff will be happy to assist you competently with their specialist knowledge. Telephone: +49 (0)5241 9443-0 E-mail: service@bio-circle.de
4 BIO-CIRCLE Maxi The sturdy one The BIO-CIRCLE Maxi is a high-performance, sturdy and durable parts washer. It scores with its ease of use and high payload. Large effective surface, plenty of space even for cumbersome parts that can be cleaned perfectly with the long hose on the brush Easy handling with push-button switch The hinged upper section with its gas spring guarantees easy servicing, maintenance and repair Lid (optional feature) protects from contamination NEw The compact one in a new design In place of our proven BIO-CIRCLE Compact and in a modern style the BIO-CIRCLE GT Compact captivates with its compact design and fl exibility. GT Compact Optimized depth of the basin ensures good splash protection Easy transport by means of a lift truck or a rail system with castors (optional) Newly designed control box with easier access to the components Filter system in the basin drain (coarse-, fine- and bag filter plus magnet)
55 Mini The flexible one The BIO-CIRCLE Mini makes you mobile and fl exible, and you can work comfortably in changing locations. Tried and tested reliable parts washing system in a flexible design Integrated trolley with two stationary and two steering castors Manoeuvrable and easy to push, can be utilized quickly in changing locations Maximum filling capacity: 80 L BIO-CIRCLE Mini BIO-CIRCLE GT Compact BIO-CIRCLE Maxi Work surface (W x D) 610 x 500 mm 700 x 480 mm 880 x 580 mm Payload 90 kg 100 kg 220 kg Working height 1010/820 mm 970/800 mm 960/820 mm Operating temperature 15 45 C, Factory-set 15 45 C, Factory-set 15 45 C, Factory-set at approx. 41 C at approx. 41 C at approx. 41 C Heating approx. 700 W approx. 650 W approx. 700 W Pump 40 W 40 W 40 W Optimum filling quantity 80 litres 90 litres 100 litres Material LDPE LDPE LDPE Empty weight approx. 40 kg approx. 45 kg approx. 60 kg Power supply 230 V, 50 Hz 230 V, 50 Hz 230 V, 50 Hz Order number G70026 G50026 G60026
6 BIO-CIRCLE Turbo 2 in 1 automatic and manual cleaning The BIO-CIRCLE Turbo stainless steel the effective combination of fully automated and manual cleaning. A maintenance-friendly high-pressure spray system in combination with the bioremedial cleaning medium BIO-CIRCLE L Turbo provides for thorough cleaning and degreasing of work pieces. With its powered rotating rack and the high spray pressure of 4 bars BIO-CIRCLE L Turbo has an optimal effect on the items to be cleaned. For fast and precise manual cleaning the brush or the nozzle can be used instead of automatic cleaning. Sturdy V2A stainless steel design with a payload of 350 kg, heatable, factory-set at 50 C Robust stainless steel basket with mechanical rotation, momentary switch for rotating the basket in idle state for easy loading/unloading and manual cleaning A circuit breaker prevents the pump motor from running while the lid is open safe handling guaranteed We have been conferred the 2008 Industrial Award Environmental Technology by the Initiative Mittelstand. Ergonomic hand spray gun with quick release fastener for cleaning brush and variable cleaning nozzle (generates a precision jet removes contaminations from inaccessible spots, or an area jet cleans smooth surfaces) fast drying possible by means of a pneumatic spray gun Tank with slightly tilted bottom for faster emptying, tank cover with filter elements beneath the basket, with dry running protection A time switch controls the duration of the automatic cleaning and provides optimal ease of use BIO-CIRCLE Turbo: 2 in 1 automatic and manual cleaning
77 BC Turbo 800 BC Turbo 1000 BC Turbo 1200 Overall width (mm) x Depth (mm) 1060 x 1140 1250 x 1340 1470 x 1575 Scan the QR code Height, lid closed / open (mm) 1560/1965 1560/1965 1800/2300 with your smartphone Internal diameter basket (mm) 775 975 1175 and see Hight max. pag (mm) 450 450 650 BIO-CIRCLE Turbo Payload (kg) 150 250 350 live at work. Empty weight (kg) 330 380 430 Electric outlet (kw) 6,7 9 9 Power supply (V/Hz) 4 / 12 4 / 12 4 / 12 Heater output (kw) 4,5 6 6 Tank capacity (L) 160 275 380 Air supply (bar) max. 6 max. 6 max. 6 Order number G40027 G42027 G43027 Stainless steel top piece for BIO-CIRCLE The convincing features of the stainless steel top piece for the BIO-CIRCLE are its large work surface and high payload (up to 1000 kg). It is ideally suited for the cleaning of big and heavy parts. Available for BIO-CIRCLE Maxi. Particularly large work surface (approx 1500 x 950 mm) that can be used by two operators at the same time Conical drain with sieve filter and filter bag (25 µm) Easy loading possible by means of a crane PE grids (optional) for protection Maximum load without base frame 220 kg, Maximum load with base frame (square tube frame) 500 kg or 1000 kg load G60026-17 Stainless steel top piece with base frame BC Maxi Load 500 kg, 1504 x 1004 x 300 mm G60026-18 Stainless steel top piece for BC Maxi Load 220 kg, 1500 x 950 x 300 mm G60026-19 Stainless steel top piece with base frame BC Maxi Load 1000 kg, 1504 x 1004 x 300 mm
8 BIO-CIRCLE Liquid Five high-performance BIO-CIRCLE Liquids guarantee optimum results in parts washing. + Apple BIO-CIRCLE Smell BIO-C original Smell Dermatologically tested! The new BIO-CIRCLE Liquid range the right solution for any application! The BIO-CIRCLE Liquids are specialists in clean solutions. They stand out for their fast and thorough cleaning performance. The natural micro-organisms they contain degrade the oil ingressed and guarantee long durability and a long serviceable life with a constantly high cleaning performance. The aqueous BIO-CIRCLE Liquids do not contain any solvents, thus avoiding VOC emissions, and meet the requirements of the solvent directive. They do not require placarding/labelling under the Ordinance on Hazardous Substances and EU Directive, and are therefore easy and safe to use, store, and transport. We will be happy to advise you on which BIO-CIRCLE Liquid is the right one for you. We give competent advice and valuable tips on technically correct parts washing. VOC frei! natural The BIO-CIRCLE benefits from the powers of Nature in order to provide for userfriendly, ecofriendly, and economical parts washing. They clean without any solvents or cold cleaners, thus protecting the employee and the environment from highly volatile vapours. The ph-adjusted cleaning medium BIO-CIRCLE Liquid dissolves processing oils, cutting coolants, anti-corrosion products, light greases and similar contaminations as well as particle contaminations from the parts. The easy-to-clean fi lter system separates coarse and fi ne contaminations, and the natural micro-organisms biodegrade the greases and oils, thus maintaining the cleaning performance. simple The BIO-CIRCLE Liquids are ready to use, which eliminates the risk of incorrect dilution and variations in quality, and the necessity of regular bath analyses. The aqueous BIO-CIRCLE Liquids do not pit the surfaces; all materials from plastics to steel can be cleaned. profitable BIO-CIRCLE Liquid features a bath lifetime that is up to four times as long as with cold cleaners. Even with a higher contamination input a constantly good cleaning result is achieved. BIO-CIRCLE Liquid means no hazard to humans and the environment, paired with high efficiency and cost effectiveness. * The used micro-organism are non-pathogen bacteria of group 1 acc. to Directive 2000/54/EC. (Group 1 means that it is unlikely to cause human disease).
99 BIO-CIRCLE L Product description in accordance with ÖNORM B 5105: Optimally adjusted to everyday soiling Oil separator compatible TESTED IN ACCORDANCE WITH ÖNORM B 5105 Registration number: ON-N 2011 140 Fresh apple scent Special corrosion inhibitors guarantee temporary protection after cleaning NSF certified Improved skin protection through panthenol Skin-friendliness has been dermatologically tested Surfactants on the basis of renewable resource A02026 20 L jerrycan A20026 200 L drum A10026 1000 L IBC BIO-CIRCLE L Ultra Remove strong contaminations, such as bitumen, anti-rust waxes, burned-in grease, oil, oil carbon, coloured pigment Special corrosion inhibitors guarantee temporary protection after cleaning NSF certification Works on basis of renewable raw materials A02072 20 L jerrycan A20072 200 L drum A10072 1000 L IBC BIO-CIRCLE Apple BIO-C Smell original Smell NATURE BOOST BIO-CIRCLE L Heavy Duty Removes even heavy oils and greases Improved cleaning performance especially for tenacious soiling Without scent can be added as required Special corrosion inhibitors guarantee temporary protection after cleaning Skin-friendliness has been dermatologically tested For temperatures of up to 45 C Surfactants on the basis of renewable resource A02098 20 L jerrycan A20098 200 L drum A10098 1000 L IBC BIO-CIRCLE L Aluminium For the cleaning of sensitive materials, such as aluminium Virtually residue-free Without scent can be added as required NSF certification Surfactants on the basis of renewable resources Skin-friendliness has been dermatologically tested A02099 20 L jerrycan A20099 200 L drum A10099 1000 L IBC BIO-CIRCLE L Turbo Low foaming for mechanical cleaning in the BIO-CIRCLE Turbo For temperatures of up to 50 C With corrosion protection A02082 20 L jerrycan A20082 200 L drum A10082 1000 L IBC CLEANING CONSISTENCY Cleaning performance (%) Week 1 Week 2 Week 3 Week 4
10 BIO-CIRCLE BIO-CIRCLE accessories BIO-CIRCLE general Brushes (flooded with cleaning agent solution) G20726 Washing brush Supports cleaning G20729 Washing brush with medium-hard bristles, straight G28526 Washing brush, angled Supports cleaning in angular and hard-to-reach corners. G20727 Washing brush, broad, angled G27326 Washing brush with soft bristles (nylon 0.3 mm) With this washing brush sensitive parts can be cleaned without harming the material. Tube cleaning nozzles (Application in all BIO-CIRCLE units) For uniform wetting, rinsing, and cleaning of interior tube surfaces. G21226 approx. 600 mm with hose attachment G21326 approx. 600 mm with quick-action coupling G21426 approx. 800 mm with brush head and hose attachment G21526 approx. 800 mm with brush head and quick-action coupling Pumps BC pump for 230 V Hose G29126 Liquid hose for BIO-CIRCLE, sold by the metre, 8 mm interior The feed line to the washing brush can be extended for big parts. Filters Inserts for fi lter casings (nylon fi lter, washable; Wound cartridge fi lter, non-washable) G22026 Nylon fi lter support core Holds the replaceable nylon fi lter G28326 Nylon fi lter 100 μm, blue G28726 Nylon fi lter 150 μm, brown G28426 Nylon fi lter 200 μm, green G21926 Nylon fi lter 350 μm, grey G22726 Wound cartridge fi lter 100 μm Trading unit: 6 pieces G22826 Wound cartridge fi lter 200 μm Trading unit: 6 pieces Foot switch For comfortable and easy handling. The washing process is initiated by means of a foot switch. G26126 Foot switch (electro-pneumatic) G29827 Pump with increased flow rate. Recommended for stainless steel top. 330 W G27926 Pump for acidic media With this pump and an acidic cleaner (e.g. bio-chem Power Cleaner) in the BIO-CIRCLE you can derust and/or descale parts, or remove other mineral contaminations from the parts. 45 W Filter accessories For Mini, GT Compact and Maxi. G54126 Opening key for fi lter casings Filter bags The filter bags are fastened under the basin discharge by means of a bracket. G54626 Filter bag nylon 50 µm washable G54726 Filter bag nylon 100 µm washable G54426 Filter bag polypropylene needle felting 5 µm G54526 Filter bag polypropylene needle felting 25 µm G54826 Add-on bracket for filter bags on GT Compact and Maxi, with 3 screws Floating spheres (polypropylene) To reduce evaporation losses They are afl oat on the cleaner surface. G27726 1000 g in a 10 L pail
11 BIO-CIRCLE Mini BIO-CIRCLE GT Compact Lid Protects from pollution and reduces evaporation of the cleaning liquid. G552039 for BIO-CIRCLE Mini Lid Protects from pollution and reduces evaporation of the cleaning liquid. G50327 for BIO-CIRCLE GT Compact Inox protection grid Made from perforated stainless steel, facilitates work without canting and protects the cleaning basin from sharp-edged parts. G70326 for BIO-CIRCLE Mini Inox protection grid Made from perforated stainless steel, facilitates work without canting and protects the cleaning basin from sharp-edged parts. G50326 for BIO-CIRCLE GT Compact BIO-CIRCLE Maxi Lid Protects from pollution and reduces evaporation of the cleaning liquid. G5520323 for BIO-CIRCLE Maxi Inox protection grid Made from perforated stainless steel, facilitates work without canting and protects the cleaning basin from sharp-edged parts. G60226 for BIO-CIRCLE Maxi Mobility kit BIO-CIRCLE Turbo The sturdy rails equipped with one lockable and one swivel castor each make the device mobile and hence fl exible in use. G50427 Mobility kit for BIO-CIRCLE GT Compact 2 SS rails with lockable/swivel castors Gloves G42207 Gloves size 11 Trolley The sturdy trolley makes the device mobile and hence versatile. G60326 for BIO-CIRCLE Maxi, galvanized (W 1000 x D 1000 x H 200 mm) Jerrycan cap spanner, Deheader for bung holes H00016 Jerrycan cap spanner for both DIN 51 and DIN 61, plastic, colour: green Advice: The corrosion protection provided does not meet the requirements of your application? The bio-chem corrosion protection for aqueous systems is the solution. It can be added to the BIO-CIRCLE parts washers at any time. Contains 100 % active ingredients Very economical a low application concentration is suffi cient Nitrite-free Corrosion protection for aqueous systems A00111 1000 ml plastic bottle Trading unit: 12 x 1000 ml (1 cardboard box) A01011 10 L jerrycan A03011 30 L jerrycan A12011 120 L drum
12 BIO-CIRCLE White Biotechnology squares human economic management with the natural cycles of materials. There are plenty of products the application of which helps improve our quality of life. The BIO-CIRCLE is a representative example of the success story of White Biotechnology. www.weisse-biotechnologie.net Our BIO-CIRCLE systems distinguish themselves for the following: Comparison between a conventional parts cleaner with cold cleaner and BIO-CIRCLE What happens in case of increased pollution input? What contaminations can be removed? Organic, unpolar (greases, oils) Inorganic, polar (salts) Inorganic, unpolar (chippings, dust) What materials can be cleaned? Stainless steel Steel Aluminium Non-ferrous metals Occupational safety and health Parts cleaner with cold cleaner Saturation of the rinsing solution Deterioration of cleaning performance Modest Modest BIO-CIRCLE BIO-CIRCLE L Results remain the same over the entire period Good excellent cleaning performance thanks to an optimum combination of mechanics, temperature, chemistry and nature Impairments to health (Source: Gefahrstoffe Kaltreiniger, M043, 02/2007, BG Chemie)) Parts cleaner with cold cleaner BIO-CIRCLE BIO-CIRCLE L no solvents, no cold cleaners no fi re hazard aqueous cleaning medium no hazardous substance, no hazardous material, hence no special regulations regarding storage, handling, and transportation cleaned parts are protected from corrosion long service life because of biological oil degradation Nerve damage Skin damage Liver damage Kidney damage Blood cell damage Mutagenic and fecundity-endangering effects Carcinogenic effects Toluene, xylene, trichloroethylene, n-hexane, petroleum ethers (hexanal isomers, pentane, heptane, octane) Yes Methylene chloride, trichloroethylene, toluene, xylene, methanol, ethanol Trichloroethylene, petroleum, fuel mixtures, hexane, heptane, toluene, xylene, alcohols Toluene, benzene Organic solvents Benzene BIO-CIRCLE on the road We put the BIO-CIRCLE parts cleaner into motion and it comes directly to your door. Get an idea on site and assure yourself of the functionality, and its excellent cleaning performance paired with best possible user- and environmental protection. Examine the high-quality workmanship and optimized ease of use, and compare your demands on a parts cleaner with integrated brush to the BIO-CIRCLE system. Experience the BIO-CIRCLE at fi rst hand during an application test on your premises. For more detailed information on renting conditions please call the number below. Are you interested? We ll be happy to make an appointment with you. Telephone: +49 (0)5241 9443-0 E-mail: service@bio-circle.de Bio-Circle Surface Technology GmbH Berensweg 200 D-33334 Gütersloh Telefon: +49 (0)5241 9443-0 Telefax : +49 (0)5241 9443-44 E-Mail: service@bio-circle.de www.bio-circle.de