NÁVRHY NORIEM IEC PREDLOŽENÝCH NA VEREJNÉ PREROKOVANIE za obdobie od 1. 1. 2018 do 31. 1. 2018 Documents Title Closing date 13/1755/FDIS IEC 62055-41 ED3: Electricity metering - Payment systems - Part 41: Standard transfer specification (STS) - Application layer protocol for one-way token carrier systems 14/947/FDIS IEC 60076-3/AMD1 ED3: Amendment 1 - Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air 20/1781/FDIS IEC 60331-1 ED2: Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830 C for cables of rated voltage up to and including 0,6/1,0 kv and with an overall diameter exceeding 20 mm 20/1782/FDIS IEC 60331-3 ED2: Tests for electric cables under fire conditions - Circuit integrity - Part 3: Test method for fire with shock at a temperature of at least 830 C for cables of rated voltage up to and including 0,6/1,0 kv tested in a metal enclosure 20/1783/FDIS IEC 60331-2 ED2: Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830 C for cables of rated voltage up to and including 0,6/1,0 kv and with an overall diameter not exceeding 20mm 20/1784/FDIS IEC 60754-3 ED1: Test on gases evolved during combustion of materials from cables - Part 3: Measurement of low level of halogen content by ion chromatography 21/952/CDV IEC 62902 ED1: Secondary batteries: Marking symbols for identification of their chemistry 26/642/CDV IEC 60974-14 ED1: Arc welding equipment - Part 14: Calibration, validation and consistency testing 31/1358/CDV IEC 60079-31 ED3: Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" 34/481/FDIS IEC 62386-217 ED1: Digital addressable lighting interface - Part 217: Particular requirements for control gear - Thermal gear protection (device type 16) 34/482/FDIS IEC 62386-218 ED1: Digital addressable lighting interface - Part 218: Particular requirements for control gear - Dimming curve selection (device type 17) 34/483/FDIS IEC 62386-207 ED2: Digital addressable lighting interface - Part 207: Particular requirements for control gear - LED modules (device type 6) 34/484/FDIS IEC 62386-222 ED1: Digital addressable lighting interface - Part 222: Particular requirements for control gear - Thermal lamp protection (device type 21) 34B/1955/FDIS IEC 60061-4/AMD16 ED1: Amendment 16 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information 46F/397/CD IEC 61169-15 ED1: Radio-frequency connectors. Part 15: R.F. coaxial connectors with inner diameter of outer conductor 4.13 mm (0.163 in) with screw coupling - Characteristic impedance 50 ohms (Type SMA) 46F/398/CD IEC 61169-64 ED1: Radio Frequency Connectors Part 64: Sectional specification for RF coaxial connectors with 0.8 mm inner diameter of outer conductor characteristic impedance 50 Ω (type-0.8) 46F/399/CD IEC 63138-2 ED1: Multi radio frequency channel connector - Part 2: Sectional specification for MQ4 series circular connector Page 1 of 8
47/2456/CD IEC 62779-4 ED1: Semiconductor devices - Semiconductor interface for human body communication- Part 4: Semiconductor interface for capsule endoscopy using human body communication 51/1217/FDIS IEC 63093-7 ED1: Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 7: EER-cores 56/1763/CD IEC 62960 ED1: Dependability reviews during the life cycle 62A/1236/DTR IEC TR 60601-4-3 ED2: Medical electrical equipment - Part 4-3: Guidance and interpretation - Considerations of unaddressed safety aspects in the third edition of IEC 60601-1 and proposals for new requirements 62A/1237/CD IEC 60601-1/AMD2 ED3: Medical electrical equipment - Part 1: General requirements for basic safety and essential performance 62A/1239/CD IEC 60601-1-11/AMD1 ED2: Amendment 1 Medical electrical equipment Part 1-11: General requirements for basic safety and essential performance Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment 62D/1554/FDIS IEC 60601-2-76 ED1: Medical Electrical Equipment - Part 2-76: Particular requirements for the basic safety and essential performance of low energy ionized gas haemostasis equipment 65E/582/FDIS IEC 62714-1 ED2: Engineering data exchange format for use in industrial automation systems engineering - Automation Markup Language - Part 1: Architecture and general requirements 66/652/CDV IEC 61010-2-081 ED3: Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes 69/554/DTS IEC TS 61980-3 ED1: Electric vehicle wireless power transfer (WPT) systems - Part 3 Specific requirements for the magnetic field wireless power transfer systems 72/1114/CDV IEC 60730-2-14/AMD1 ED2: Automatic electrical controls - Part 2-14: Particular requirements for electric actuators 78/1203/CD IEC 61318 ED4: Live working - Conformity assessment applicable to tools, devices and equipment 80/878/CD IEC 61108-5 ED1: Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 5: BeiDou satellite navigation system (BDS) - Receiver equipment - Performance requirements, methods of testing and required test results 86B/4117/CD IEC 61300-3-54 ED1: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-54: Examinations and measurements - Angular misalignment between ferrule bore axis and ferrule axes for cylindrical ferrules 86C/1493/CDV IEC 62148-21 ED1: Fibre optic active components and devices Package and interface standards Part 21: Design guide of electrical interface of PIC packages using Silicon Fine-pitch Ball Grid Array (S-FBGA) and Silicon Fine-pitch Land Grid Array (S-FLGA) 105/677/CDV IEC 62282-6-400 ED1: Fuel cell technologies - Part 6-400: Micro fuel cell power systems - Power and data interchangeability 114/244/CD IEC TS 62600-2 ED2: Marine energy - Wave, tidal and other water current converters - Part 2: Design requirements for marine energy systems 115/181/CD IEC TR 63179 ED1: Planning of HVDC systems Part 1: HVDC systems with line commutated converters 1/2354/CDV IEC 60050-485 ED1: International Electrotechnical Vocabulary - Part 485: Fuel cell technologies 20/1781A/FDIS IEC 60331-1 ED2: Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830 C for cables of rated voltage up to and including 0,6/1,0 kv and with an overall diameter exceeding 20 mm Page 2 of 8
20/1782A/FDIS IEC 60331-3 ED2: Tests for electric cables under fire conditions - Circuit integrity - Part 3: Test method for fire with shock at a temperature of at least 830 C for cables of rated voltage up to and including 0,6/1,0 kv tested in a metal enclosure 20/1783A/FDIS IEC 60331-2 ED2: Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830 C for cables of rated voltage up to and including 0,6/1,0 kv and with an overall diameter not exceeding 20mm 27/1057/CD IEC 63078 ED1: Installations for electroheating and electromagnetic processing - Test methods for induction throughheating installations 32B/673/CDV IEC 60269-6/AMD1 ED1: Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems 34B/1959/CD IEC 60400/AMD1 ED8: Lampholders for tubular fluorescent lamps and starterholders 34B/1960/CD IEC 60838-1/AMD2 ED5: Miscellaneous lampholders - Part 1: General requirements and tests 34C/1382/CD IEC 62384 ED2: DC or AC supplied electronic control gear for LED modules - Performance requirements 40/2579/CDV IEC 60384-21 ED3: Fixed capacitors for use in electronic equipment - Part 21: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 40/2580/CDV IEC 60384-22 ED3: Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 40/2588/CD IEC 60115-1 ED5: Fixed resistors for use in electronic equipment - Part 1: Generic specification 44/803/FDIS IEC 62046 ED3: Safety of machinery Application of protective equipment to detect the presence of persons 45/842/CDV IEC 63047 ED1: Nuclear instrumentation - Data format for list-mode digital data acquisition used in radiation detection and measurement 45B/886/CDV IEC 62244 ED2: Radiation protection instrumentation - Installed radiation portal monitors (RPMs) for the detection of illicit trafficking of radioactive and nuclear materials 46C/1093/CDV IEC 61156-11: MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS Part 11: Symmetrical single pair cables with transmission characteristics up to 600 MHz horizontal floor wiring Sectional specification 47/2448/CDV IEC 63150-1 ED1: Semiconductor devices - Measurement and evaluation methods of kinetic energy harvesting devices under practical vibration environment - Part 1: Arbitrary and random mechanical vibrations 48B/2619/CDV IEC 61076-3-124/Ed1: Connectors for electronic equipment - product requirements Part 3-124: Rectangular connectors Detail specification for 10way, shielded, free and fixed rectangular connectors for I/O and data transmission capability with frequencies up to 500 MHz. 48D/664/FDIS IEC 62610-2 ED1: Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 2: Method for the determination of forced air cooling structure 57/1954/FDIS 57/1955/FDIS 61/5589/CDV IEC 61970-302 ED1: Energy Management System Application Program Interface (EMS-API) - Part 302: Common information model (CIM) dynamics IEC 62325-451-6 ED2: Framework for energy market communications - Part 451-6: Publication of information on market, contextual and assembly models for European-style markets IEC 60335-2-116 ED1: Household and similar electrical appliances - Safety - Part 2-116: Particular requirements for furniture with electrically motorized parts Page 3 of 8
62A/1241/CD IEC 60601-1-8/AMD2 ED2: Amendment 2 Medical electrical equipment Part 1-8: General requirements for basic safety and essential performance Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems 62B/1076/CD IEC 60336 ED5: Medical electrical equipment - X-ray tube assemblies for medical diagnosis - Characteristics of focal spots 64/2259/CD IEC 60364-4-43 Ed. 4: Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against 2018-05-11 overcurrent 65B/1110/FDIS IEC 62828-3 ED1: Reference conditions and procedures for testing industrial and process measurement transmitters - Part 3: Specific procedures for temperature transmitters 65B/1111/DTR IEC TR 63176 ED1: PROCESS ANALYSIS TECHNOLOGY SYSTEMS AS PART OF PROCESS CONTROL SAFETY EQUIPMENT 78/1205/FDIS IEC 61482-2 ED2: Live working - Protective clothing against the thermal hazards of an electric arc - Part 2: Requirements 80/879/FDIS IEC 61162-460 ED2: Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 460: Multiple talkers and multiple listeners - Ethernet interconnection - Safety and security 82/1390/CD IEC TS 63019 ED1: Information model for availability of photovoltaic (PV) power systems 95/375(F)/CDV IEC 60255-181 ED1: Measuring relays and protection equipment - Part 181: Functional requirements for frequency 2018-03-30 protection 107/320/CDV IEC 62239-1 ED1: Process management for avionics - Management plan - Part 1: Preparation and maintenance of an electronic components management plan 107/325/DTR IEC TR 62240-2 ED1: Process management for avionics Electronic components capability in operation Part 2: Semiconductor microcircuit lifetime 110/949/CD IEC 62906-5-6 ED1: Laser display devices Part 5-6: Measuring methods for optical performance of screens 114/244A/CD IEC TS 62600-2 ED2: Marine energy - Wave, tidal and other water current converters - Part 2: Design requirements for marine energy systems 116/359/CDV IEC 62841-3-7 ED1: Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-7: Particular requirements for transportable wall saws 122/54/CD IEC TS 63042-201 ED1: UHV AC transmission systems: Part 201: UHV AC substation design CIS/A/1244/FDIS CISPR 16-1-1/ISH1 ED4: Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus 8/1485/CD IEC TS 62749 ED2: Assessment of power quality - Characteristics of electricity supplied by public networks 9/2371/CD IEC 60077-3 ED2: Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components - Rules for DC circuit-breakers 9/2372/CD IEC 60077-4 ED2: Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components - Rules for AC circuit-breakers 9/2373/CD IEC 60077-5 ED2: Railway applications - Electric equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses 13/1756/CD IEC 62052-11 ED2: Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment 13/1757/CD IEC 62053-21 ED2: Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2) Page 4 of 8
13/1758/CD IEC 62053-22 ED2: Electricity metering equipment (a.c.) - Particular Requirements - Part 22: Static meters for active energy (classes 0,1 S, 0,2 S and 0,5 S) 13/1759/CD IEC 62053-23 ED2: Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3) 23H/397/CD IEC 61316/AMD1 ED2: Industrial cable reels 2018-05-18 31M/128/CD ISO/IEC 80079-41 ED1: Explosive atmospheres - Part 41: Reciprocating internal combustion engines 34/489/CD IEC 62386-105 ED1: Digital addressable lighting interface Part 105: Particular requirements for control gear Firmware Transfer 45A/1183/FDIS IEC 61500 ED3: Nuclear power plants - Instrumentation and control systems important to safety - Data communication in systems performing category A functions 45A/1185/FDIS IEC 60709 ED3: Nuclear power plants - Instrumentation, control and electrical power systems important to safety - Separation 47D/899/CDV IEC 60191-2/FRAG72 ED1: Proposed new package outline - P-UMP-Ax 48B/2626/FDIS IEC 62946-01 ED1: Connectors for electronic equipment - Part 01: Rectangular connectors - Detail specification for 8- way, shielded, free and fixed high density connectors for data transmission with frequencies up to 100 MHz and with current carring capacity up to 1A. 59L/154/CD IEC 60704-2-7 ED2: Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-7: Particular requirements for fans 59L/155/CD IEC 60704-2-8 ED2: Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-8: Particular requirements for electric shavers and clippers or trimmers 61/5625/FDIS IEC 60335-2-114 ED1: Household and similar electrical appliances - Safety - Part 2-114: Particular requirements for self-balancing personal transport devices for use with batteries containing alkaline or other non-acid electrolytes 62A/1244/CD IEC 80001-1 ED2: Safety, effectiveness and security in the implementation and use of connected medical devices or connected health software - Part 1: Application of risk management 62C/710/CD IEC TR 62926 ED1: Medical electrical system - Recommendations for safe integration and operation of adaptive external-beam radiotherapy system for intra-fractionally moving target volumes 62D/1557/FDIS IEC 60601-2-16 ED5: Medical electrical equipment - Part 2-16: Particular requirements for basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment 62D/1558/FDIS IEC 60601-2-39 ED3: Medical electrical equipment - Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment 65B/1110A/FDIS IEC 62828-3 ED1: Reference conditions and procedures for testing industrial and process measurement transmitters - Part 3: Specific procedures for temperature transmitters 69/550/CDV ISO 15118-1 ED2: Road vehicles - Vehicle to grid communication interface - Part 1 General information and use case definition 69/556/CD IEC 61851-23-1 ED1: Electric vehicle conductive charging system - Part 23-1: D.C. electric vehicle charging station with an autoconnect charging device 82/1391/CD IEC 62788-1-6/AMD1 ED1: Measurement procedures for materials used in photovoltaic modules - Part 1-6: Encapsulants - Test methods for determining the degree of cure in Ethylene-Vinyl Acetate 85/620/CDV IEC 60051-9 ED5: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 9: Recommended test methods 86A/1845/CDV IEC 60793-1-32 ED3: Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability Page 5 of 8
86A/1846/CDV IEC 60793-2-50 ED6: Optical fibres - Part 2-50: Product specifications - Sectional specification for class B singlemode fibres 86A/1847/CDV IEC 60793-1-31 ED3: Optical fibres - Part 1-31: Measurement methods and test procedures - Tensile strength 86C/1505/FDIS IEC 61290-4-3 ED2: Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control 91/1489/CDV IEC 61188-6-4 ED1: Printed boards and printed board assemblies - Design and use - Part 6-4: Generic requirements for dimensional drawings of SMD from viewpoint of land pattern design 105/678/CD IEC 62282-8-102 ED1: Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for proton exchange membrane single cell and stack performance including reversing operation 105/679/CD IEC 62282-8-201 ED1: Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Power-to-power systems- Performance 113/405/DTS IEC TS 62607-4-7 ED1: Nanomanufacturing - Key control characteristics - Part 4-7: Anode nanomaterials for nanoenabled electrical energy storage- Determination of magnetic impurities, ICP-OES method 9/2374/FDIS IEC 61375-2-6 ED1: Electronic railway equipment - Train communication network (TCN) - Part 2-6: On-board to ground communication 22F/479/CDV IEC 62751-2/AMD1 ED1: Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular multilevel converters 22F/480/CDV IEC 60633 ED3: Terminology for high-voltage direct current (HVDC) transmission 22F/481/CDV IEC 62747/AMD1 ED1: Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systems 25/620/FDIS IEC 60375 ED3: Conventions concerning electric circuits 26/648/FDIS IEC 60974-9 ED2: Arc welding equipment - Part 9: Installation and use 27/1058/CD IEC 60519-1 ED6: Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements 32B/677/CD IEC TR 60269-5/AMD1 ED2: Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses 2018-03-30 34/491/FDIS IEC 62386-216 ED1: Digital addressable lighting interface - Part 216: Particular requirements for control gear - Load referencing (device type 15) 34D/1359/CD IEC 60598-1/AMD2/FRAG14 ED8: Luminaires - Part 1: General requirements and tests 34D/1360/CD IEC 60598-1/AMD2/FRAG15 ED8: Luminaires - Part 1: General requirements and tests 45A/1179/CDV IEC 61225 ED3: Nuclear power plants - Instrumentation, control and electrical power systems - Requirements for static uninterruptible DC and AC power supply systems 45B/894/CD IEC 63085 ED1: Radiation protection instrumentation System of spectral identification of liquids in transparent and semitransparent containers 46/679/FDIS IEC 62153-4-7/AMD1 ED2: Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance ZT and screening attenuation as or coupling attenuation ac of connectors and assemblies up to and above 3 GHz - Triaxial tube in tube method 48B/2632/CD IEC 60352-3 ED2: Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance 48B/2633/CD IEC 60352-4 ED2: Solderless connections - Part 4: Solderless non-accessible insulation displacement connections - General requirements, test methods and practical guidance Page 6 of 8
48B/2635/CD IEC 60352-5 ED5: Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance 51/1212/CDV IEC 63093-5 ED1: Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 5: EP-cores and associated parts for use in inductors and transformers 51/1213/CDV IEC 63093-8 ED1: Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 8: E-cores 51/1214/CDV IEC 63093-11 ED1: Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 11: EC-cores for use in power supply applications 51/1215/CDV IEC 63093-6 ED1: Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 6: ETD-cores for use in power supplies 59K/297/FDIS IEC 60705/AMD2 ED4: Amendment 2 - Household microwave ovens - Methods for measuring performance 59M/94/CDV IEC 60704-2-14/AMD1 ED2: Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers 61C/730/FDIS Interpretation Sheet for Amendment 2 to IEC 60335-2-24 ED7: Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers 61H/363/FDIS IEC 60335-2-86 ED3: Household and similar electrical appliances - Safety - Part 2-86: Particular requirements for electric fishing machines 62C/713/CD IEC TR 63183 ED1: RADIOTHERAPY SYSTEMS AND SOFTWARE GUIDANCE ON ERROR AND WARNING MESSAGES 62C/714/DTR IEC TR 61948-2 ED2: Nuclear medicine instrumentation - Routine tests - Part 2: Scintillation cameras and single 2018-03-30 photon emission computed tomography imaging 62C/715/DTR IEC TR 61948-4 ED2: Nuclear medicine instrumentation - Routine tests - Part 4: Radionuclide calibrators 2018-03-30 86A/1849/CDV IEC 60793-1-40 ED2: Optical fibres - Part 1-40: Attenuation measurement methods 86C/1501/CDV IEC 62149-10 ED1: Fibre optic active components and devices - Performance standards - Part 10: RoF (radio over fiber) transceivers for mobile fronthaul 86C/1506/FDIS IEC 62343-3-4 ED1: Dynamic modules - Part 3-4: Performance specification templates - Multicast optical switches 100/3047/CD IEC 60728-11 ED5: Cable networks for television signals, sound signals and interactive services - Part 11: Safety (TA 2018-03-30 5) 100/3048/DTS IEC TS 62312-1-1 ED2: Guideline for synchronization of audio and video - Part 1-1: Measurement methods for synchronization of audio and video equipment and systems - General (TA 11) 100/3049/DTS IEC TS 62312-2 ED2: Guideline for synchronization of audio and video - Part 2: Methods for synchronization of audio and video systems (TA 11) 100/3027/CDV IEC 63006 ED1: Wireless Power Transfer (WPT) Glossary of Terms (TA 15) 104/787/CD IEC 60068-3-3 ED2: Environmental testing - Part 3-3: Guidance - Seismic test methods for equipments 107/329/CD IEC 62668-1 ED1: Process management for avionics - Counterfeit prevention - Part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic components 110/951/FDIS IEC 62715-6-1 ED2: Flexible display devices - Part 6-1: Mechanical test methods Deformation tests 114/255/CD IEC TS 62600-40 ED1: Marine energy - Wave, tidal and other water current converters - Part 40: Acoustic characterization of marine energy converters Page 7 of 8
115/183/CD IEC TR 63127 ED1: Guideline for the System Design of HVDC Converter Stations with Line-commutated Converters (LCC) 120/120/CD IEC 62933-5-2 ED1: Electrical energy storage (EES) systems Part 5-2: Safety requirements for grid integrated EES systems - electrochemical based systems CIS/A/1246/CD CISPR 16-1-4/AMD1/FRAG3 ED4: Fragment 3: Amendment of the large loop antenna system (LLAS) validation and conversion factors and addition of tabular values JTC1-SC25/1/CDV ISO/IEC 15067-3-3 ED1: Information technology -- Home Electronic System (HES) application model -- Part 3-3: Model of distributed energy management agent (EMA) for demand response energy management 2018-03-30 Page 8 of 8