GLOBAL WARNING WWW.HAZTEC.UK sirens speakers and programmable controls 3 march 2016 1 warning lights, work lights and ancillaries see separate brochure (1) 2 lightbar range overview see separate brochure (2) 4 warning beacons see separate brochure (4)
eurosmart - multiplex siren & control system Introduction Eurosmart is a very advanced modular system that can be used for a wide variety of switching, control and siren requirements. At the heart of the system is a range of hand held and dash mounted switch panels. These communicate with switching modules, lightbars and sirens via a data cable. Users can select the required components which then simply plug together to provide the required functionality. All the devices are fully programmable so can be configured to suit the required system functions. Units can either be programmed at Haztec prior to despatch or software is available that allows users to configure systems as needed. Programmable switch panels can be either dash mounted type or hand held units. External control modules can be added as required, these can function as simple switching relays, headlamp flashers, runlock modules etc. Eurosmart handsets can also communicate directly with Eurosmart sirens as well as many of the latest Haztec LED lightbar flash controllers. A single Eurosmart system can control all of the audio visual warning equipment on a vehicle as well as ancillary equipment such as work and scene lighting. The system is fully programmable and can be re-configured at any time to suit changing requirements. 8-82613-8 Siren with 8 x 10A switched outputs Siren with built in switched outputs to control grille lights, headlights etc. Lightbar, siren, and auxiliary lights all controlled by handset. Handset contains a microphone providing full PA functionality Optional additional remote mounted switch module can be added if required OPTIONAL remote module with 4 or 8 x 10A switched outputs. Dash mount switch panel controls all lightbar functions, optional remote mounted switch module provides up to 8 switched outputs all controlled by common switch panel. Up to 3 modules can be linked giving maximum 24 separately controlled outputs if required = Speaker Cable Handset plugs directly into lightbar providing full control of all lightbar functions with just a single data cable connection. User interface The Eurosmart range includes 5 dash mount and 2 handheld controllers. Handheld controllers have a built in microphone to provide PA functionality when used with a Eurosmart siren and speaker. Dash mount controllers can be supplied with a plug in standard or speech record microphone if required. Eurosmart supports complex switching requirements, multiple modes can be programmed and stored for activation by a single push-button. For example, common modes such as responding or arrival can be pre-programmed into Eurosmart, so pressing a single button sets each system component to its appropriate operation For example pressing a single button could cause the lightbar to activate in a particular flash mode, the siren to activate in a specific tone and external lights such as grille lights, headlights, etc to come on. In addition buttons can be assigned to activate alley lights, takedown lights, other lighting etc. Hand held controllers are supplied with a magnetic mount quick release bracket to attach the controller to the dashboard when not in use. See overleaf for details of the available hand held and dash mount controllers. 1
hand held switch units with built in microphones 8-82121 10 button Hand-held switch unit Built in noise cancelling microphone Thumb wheel volume control for P.A. Supplied with quick release panel mount Backlit buttons (brightness increases when pressed 8-82116 16 button Hand-held switch unit Custom printed buttons legends Fully programmable Tamper proof legend covers Built in noise cancelling microphone Thumb wheel volume control for P.A. Supplied with quick release panel mount Backlit buttons (brightness increases when pressed Legends for 8-82121 are screen printed, various different versions are available 8-82121 & 8-8116 are supplied with a plug in coiled lead cable and a junction box for simple installation 50W x 113H x 19D 75W x 146H x 25D 2 Order code 8-82121KIT 10 button Eurosmart hand held controller with built in microphone Order code 8-82116KIT 16 button Eurosmart hand held controller with built in microphone
dash mount switch units (optional microphones) 8-82208 / 8-2210 Dash mount programmable switch panel. 8 / 10 button panels Fully programmable DIN slot or surface mount Custom printed buttons legends Tamper proof legend covers Side mounted socket for fist microphone 8-82208 / 8-2210 Dash mount accessories 8-82002 Fist microphone. Supplied with dash clip Plugs into switch unit 8-82002 Fist microphone 8-82003 / 8-82004 Speech record microphones Speech record and playback Record message then set to continuous playback Live broadcast facility 8-82208 & 8-82210 are both supplied with U bracket for simple on or under dash installation Order code 8-82003 8-82004 Speech record / playback microphone for direct connection to amplifier Speech record / playback microphone for connection via a switch panel Dimensions (mm) 8-82208 - 128W x 46H x 56D 8-82210 - 187W x 46H x 56D 8-82208 8 Button programmable switch unit. 8-82210 10 Button programmable switch unit. 8-82010 Din fixing bracket for 8-82210 8-82011 Din fixing bracket for 8-82208 (includes cut out for additional power outlet) 3
dash mount siren controllers 8-82103 Dash mount siren / PA controllers Simple dash mount controller Rotary siren tone selector Includes PA microphone PA volume control U bracket for on / under dash mount 8-82103 with siren control buttons 8-82103-B with lighting control buttons Dash mount switch unit with rotary tone selector, a PA input with volume control and horn ring transfer function. Data cable connections are provided at the rear and underneath the controller allowing the unit to be mounted in, on or under the dash. Dimensions (mm) 110L x 50H x 20D 8-82103 can be supplied with 2 siren control buttons that provide momentary air horn or siren operation, or it can be supplied with 2 lighting control buttons. If specified with lighting control buttons, 2 or more programmable outputs will be required, these can be included within the siren or they can be in an external control module (see later pages) The volume control can be programmed to control for the PA or siren volume as required. The volume can be programmed to be fully variable or only variable between preset upper and lower limits. 8-82103 Dash mount controller (siren buttons) 8-82103-B Dash mount controller (lighting buttons) 4
dash mount siren controllers 8-82104 Dash mount controller Rotary tone selector Volume control Momentary siren / airhorn button 2 Lighting control switches Radio rebroadcast button U bracket for on / under dash mount Radio rebroadcast switch & 2 x 10A rated switches for controlling external equipment e.g. lights. 4 Tone rotary selector switch & momentary rocker switch for air horn or siren. Volume control for PA volume or PA and siren volume depending on model selected 8-82104 is a dash mount controller that includes a rotary tone selector, volume control. momentary siren and airhorn buttons plus 2 additional switches for controlling external circuits such as lighting. 141L x 45H x 27D 8-82104 Dash mount Eurosmart controller To use the switching buttons, 2 or more programmable outputs will be required, these can be included within the siren or they can be in an external control module (see later pages) The volume control can be programmed to control for the PA or siren volume as required. The volume can be programmed to be fully variable or only variable between preset upper and lower limits. 5
Eurosmart control modules Eurosmart control modules Latest generation Haztec lightbars and Eurosmart siren amplifiers can be directly controlled by sending software commands from the controller, thus avoiding the need to switch heavy power. Where the devices are required that cannot be controlled by software commands (e.g. grille lights), Eurosmart control modules can be used instead to switch the supply to the device. Up to 3 x 8-82714 or 8-82718 modules can be linked via a data cable providing up to 24 outputs that can all be controlled via a single handset or switch panel. 8-82714 / 8-82718 Control modules 4 or 8 Independent 10A outputs Fused input protection Data lead connects handset to first module Dimensions (mm) Mini USB socket to link multiple modules 75L x 30H x 65D 8-82714 4 Output programmable control module 8-82718 8 Output programmable control module Provides 4 or 8 x 10A outputs that can each be independently controlled from any of the Eurosmart switching units. Typically used to control grille lights, lightbars that do not have a data communication facility, scene lighting equipment or stand alone vehicle lighting / aux equipment. 2 separate 16A rated inputs are provided. Maximum connected load is 10 A per output / max 32A total connected load. 4 programmable inputs are provided these can be used to control the outputs using simple low power 12 / 24V signals. The programmable inputs can either be configured by Haztec prior to shipping or by the installer using the Haztec Eurosmart software. Outputs 1-8, Max 10A per indivudual output / 16A per group of outputs Input 1 - Max 16A Input 2 - Max 16A Any of the above controllers will plug directly into the 8-82714 / 8-82718 and 8-82613 and control all outputs as required. See pages 2-5 for more information 6
Eurosmart siren Eurosmart Siren 20-200W variable output Up to 8 built in switched outputs Class D design Programmable output to match speaker. Compact size Works with Eurosmart switch units or stand alone 12 or 24V operation 8-82613-8 c/w 8 switched outputs The Eurosmart siren amplifier holds a large library of siren tones and can drive a wide selection of different speaker combinations. The Siren output is programmed to suit the required speaker quantity and wattage, it is protected to prevent damage to the Eurosmart siren amplifier in the event of an external short circuit. The unit includes many advanced functions such as an interlock to ensure the siren can only be activated when a designated beacon is also operating. Additionally full data logging facilities are available. Horn ring transfer control is also included allowing the siren to be started and stopped as well as the tone changed via the vehicle horn. Units are supplied as standard as either 12 or 24V, but this can be altered by the user if required by changing internal switch settings. All Haztec Eurosmart handsets and switch panels are compatible with the Eurosmart siren. Alternatively the unit can operate as a stand alone siren controlled by the programmable inputs. 4 programmable inputs are included that allow required functions to be controlled by simple low voltage signals if required. These could be used to start / stop siren, change tone, operate at reduced volume for night time use, activate a low volume system test etc. Up to 8 x 10A rated switched outputs can be included, offering the same functionality as the 8-82718 switch module but without the need for a separate external device. Dimensions (mm) 131L x 125D x 44H 8-82613 12V Eurosmart siren unit 8-82613-2 12V Eurosmart siren unit c/w 2 outputs 8-82613-4 12V Eurosmart siren unit c/w 4 outputs 8-82613-8 12V Eurosmart siren unit c/w 8 outputs 8-82613-24 24V Eurosmart siren unit 8-82613-2-24 24V Eurosmart siren unit c/w 2 outputs 8-82613-4-24 24V Eurosmart siren unit c/w 4 outputs 8-82613-8-24 24V Eurosmart siren unit c/w 8 outputs Programming Software Eurosmart systems can be supplied pre programmed to suit users precise needs or alternatively the Haztec Eurosmart software package can be used by the installer or maintenance engineer to configure and upgrade systems as required. The software kit consists of PC software and a USB adaptor that allows the range of haztec Eurosmart handsets and devices to be connected a USB port on the PC. The software allows configuration of lightbar flash controllers, Eurosmart sirens and Eurosmart switching units. It can be used to assign any button to control any required siren or switching function. Group buttons can also be created whereby pressing a single button automatically starts or cancels a number of other functions. e.g. pressing a response button can result in the lightbar, siren and grille lights all being activated. In addition to the programmable output settings, the class D design of the new Eurosmart siren also results in a compact lightweight design. A cooling fan is fitted to the unit to ensure reliable operation even in the event of prolonged operation in elevated ambient temperatures. 2 Radio rebroadcast inputs are provided as standard Any of the above controllers will plug directly into the 8-82613 and control all tones and switched outputs as required. See pages 2-5 for more information 7
8-82413 New generation eurosmart compact Ultra compact Low current draw High output 77mm 29mm 75mm The new Eurosmart compact is a simple, low cost, very compact siren. The use of latest components and control techniques allows this new generation siren to be small, light and very competitively priced, yet still offering excellent output volume and with a low current consumption. Designed to work with either 1 or 2 of the latest generation lightweight low impedance speakers such as the 8-7050-SC. It can produce up to 118dB(A) from a single speaker at 2M. The intelligent siren can drive either one or two speakers and is compatible with the full range of Haztec Eurosmart handsets, alternatively it can be controlled by using switches to provide 12V or 24V feeds to the relevant programmable inputs. With dimensions of just 75mmD x 77mmW x 29mmH the extremely compact siren is easy to install using a plug in connector to make installation and maintenance simple and quick. The 8-82413 compact siren also includes dual data sockets allowing the siren to be quickly and easily connected to both a Eurosmart handset / controller and a number of Haztec 4 way and 8 way switching modules. This allows the 8-82413 siren to easily become part of a sophisticated siren and control system. 8-82413 can contain up to 28 different siren tones. Individual tones are selected using the programmable inputs or using any of the Haztec Eurosmart handsets or dash mount controllers. The siren includes 2 programmable inputs, these are configured via PC software to carry out user selected functions such as siren stop / start, tone change etc. The 8-82413 has dual oscillator technology. When used with 2 speakers, this allows it to produce 2 different siren tones at the same time, or alternatively to generate very piercing fanfare versions of standard tones. This is extremely effective for attracting maximum attention at high risk times. Dimension: 75mmD x 77mmW x 29mmH Weight 0.2KG New generation compact siren amplifier 8-82413 suitable for 12 or 24V use. 8-82413 has been designed specifically to operate with 8-7050-RC and 8-7050-SC speakers (see P12) 8 8-7050-RC 8-7050-SC
8-8114 universal dash / remote mount siren Suitable for dash mount or separate remote mount All hardware for dash and remote mount included. 2 x Integral 10A auxiliary control switches (for lights etc) Variable siren volume versions with programmable minimum volume setting. Non destructive reverse polarity protection Ambient temperature range -20 o C to +50 o C Rugged heavy duty removable connectors ensure ease of installation. Connector design prevents incorrect insertion. 4 Tone rotary selector switch & momentary rocker switch for air horn or siren. Radio rebroadcast switch & 2 x 10A rated switches for controlling external equipment e.g. lights. Volume control for PA volume or PA and siren volume depending on model selected Designed for combined dash mount or separated remote mount. Front panel is easily separated allowing amplifier to be remote mounted. All hardware for combined and separate mounting is supplied as standard, including extended (5 Metre) data cable to connect between the amplifier and control panel when remote. Other included functions include intelligent horn ring transfer to activate siren and change tones using the vehicle horn signal. Can be configured to disable the normal vehicle horn operation when siren is in active. A / B mode switch allows horn to select next tone or provide a brief (5 second) tone change - ideal for use at junctions and obstructions. Siren includes an optional interlock function to prevent the siren from operating unless warning lights are also operating. Automatic over voltage production - reduces siren power to compensate for overvoltage, avoiding speaker damage Dimensions: Combined unit (excl buttons) 143mmW x 177mmD x 45mmH Controller only (excl buttons) 141mmW x 27mmD x 45mmH 8-8114-12 12V 100W siren, dash or remote mount with variable PA volume 8-8114-V-12 Weight: Siren amplifier 1.1KG Shipping weight (inc looms etc) 2.3KG 12V 100W siren, dash or remote mount,variable PA and siren tone volume (programmable minimum siren tone value) 8-8114-24 24V 100W siren, dash or remote mount with variable PA volume 8-8114-V-24 24V 100W siren, dash or remote mount, variable PA and siren tone volume (programmable minimum siren tone value) 9
euromax remote mount sirens Euromax range overview Various Euromax models are available, Some systems are available without a separate controller, instead an additional push-button on the microphone or the horn ring transfer allows the siren to be activated and tone selected. Other systems incorporate a control panel, this is either integrated with the amplifier as a single dash mount unit, With remote mount units, the controller is mounted on the dash but the amplifier is fitted remotely and connected to the controller via a data lead. Some models have PA functionality and some models have switched outputs for controlling external equipment such as lighting. General range features: Units are reverse polarity protected Push buttons are backlit with additional indication when activated Additional light switches (if fitted) are normally rated at 200mA max. Use external relay units for power switching (see 8-60620) - 8-8113 & 8-8114 has 10A rated switch contacts. Basic amplifiers (no control panel) 8-8010 & 8-8000 Choice of 80W or 100W versions Control via horn Separate external controller available 8-8001 / 8-8100-A Siren 4 tones Horn ring transfer Available with 80 or 100W remote amplifier. Simple to operate compact siren controller. Rotary control for tone selection plus horn ring transfer for additional hands free tone selection / siren stop start control (horn ring stop start on 8-8100-A only.) Separate non latching push button for momentary air horn operation. Controller 68W x 52H x 34D Amplifier 142W x 46H x 149D 8-8001 12V controller & remote 80W Amplifier 8-8100-A-12 12V controller & remote 100W Amplifier Start / stop horn ring control 8-8100-A-24 24V controller & remote 100W Amplifier Start / stop horn ring control 8-8081 / 8-8101 Siren with PA facility 2 Tones No need for dash mounted controller 100W remote amplifier For applications where just basic siren operation is required, amplifiers can be wired to be controlled via the horn ring transfer. A single press is used to start the siren & change tone with a double press being used to stop the siren. Alternatively switch units can be supplied to control the siren operation and tones. Simple to operate Siren and PA system. Red button is used for siren activation and tone selection, black button is used for PA. Controller 68W x 52H x 34D Amplifier 142W x 46H x 149D 8-83101 Amplifier 150W x 46H x 140D 8-8081 12V controller & remote 80W Amplifier 8-8101-12 12V controller & remote 100W Amplifier 8-8101-24 24V controller & remote 100W Amplifier 10 8-8010 12V 80W Siren amplifier 8-8000-A-12 12V 100W Siren Amplifier 8-8000-A-24 24V 100W Siren Amplifier 8-83010 Switch panel for on/off control of 1 tone 8-83100 Switch panel on/off/on for control of 2 tones 8-83101 Switch panel on/off + 3 position tone switch
euromax remote mount sirens 8-8002 & 8-8102 Speech record and playback PA systems (no siren) Live PA or pre-recorded messages Message recording and play back Choice of 80W or 100W amplifier 8-8113 Siren with PA and switching facilities 100W output 4 Tones as standard 2 additional 10A rated outputs Optional siren / lightbar interlock function. 8-8001 & 8-8102 are Remote mount PA amplifiers that incorporate a 20 second speech record facility. Once recorded, messages can be set to play back repeatedly. The units can also be used for live PA broadcasts. Amplifier 145W x 60H x 78D Order code 8-8002-12 8-8102-12 8-8102-24 12V remote mount 80W PA amplifier with speech record facility 12V remote mount 100W PA amplifier with speech record facility 12V remote mount 100W PA amplifier with speech record facility 8-8180 / 8-8181 80W Compact siren amplifier Compact Simple to install PA facility on 8-8181 8-8113 incorporates a neat, simple to fix siren / PA controller that has a rotary switch for tone selection, a separate PA volume control and 3 additional pushbuttons. The unit is available in two formats, 8-8113-2 is configured to use 2 of the additional buttons as controls for Lightbar switching. With 8-8113-1 the 2 buttons are configured for momentary air horn or siren tone activation. Both versions have a third button which is programmed to provide a radio re-broadcast function. An optional interlock function can be used to ensure that the siren cannot be activated unless the lights are activated first. 8-8113 is supplied with a handheld microphone which plugs into a socket in the front of the panel. The high quality amplifier provides excellent microphone sensitivity. Horn ring transfer is incorporated with slide switch to select sequential tone change on horn operation or timed tone change with auto-revert. Data cable connections are provided at the rear and underneath the controller. This allows the unit to be mounted in, on or under the dash. For ease of installation integral relays are provided enabling the switches to directly control loads of up to 10A 3 tones ( wail, yelp, hi / lo as standard, other tones to special order.) With 8-8180, tones are activated by connecting the required tone trigger wire to the activation wire, with 8-8181 tones are selected using buttons on the microphone. Amplifier 110L x 48H x 110D Order code 8-8180 12V remote mount 80W siren amplifier 8-8181 12V remote mount 80W siren amplifier with PA Controller 126W x 44H x 31D Amplifier 170W x 55H x 150D 12V / 24V controller (siren buttons) & 8-8113-1-XX remote 100W amplifier 12V / 24V controller (siren buttons) & 8-8113-1-V-XX remote 100W amplifier c/w variable siren volume 12V / 24V controller (light switches) & 8-8113-2-XX remote 100W amplifier 12V / 24V controller (light switches) & 8-8113-2-V-XX remote 100W amplifier c/w variable siren volume Replace xx with 12 or 24 to signify 12 or 24V version 11
speakers Haztec offers a range of speakers that are designed to be coupled to any of the Haztec siren systems. Ensure that the chosen speaker has a rating that is at least equal to and ideally greater than the maximum output of the amplifier unit. For an 80W amplifier, 80 or 100W speakers can be selected, for 100W amplifiers 100W speakers must be used. 7000 Series speakers 7000 speakers are suitable for all general purpose applications, they are robust and available in a choice of ratings, sizes and designs. T type versions are manufactured from cast metal for maximum resilience. Apart from T style versions, speakers are available with a with a choice of different cowl shapes. The speakers have similar performance characteristics, select the preferred shape to best fit the application. Concealed (C type) speakers have a profile designed for ease of installation in confined spaces, they have a small front to back dimension with a clever acoustic design to direct the sound forwards. Order code H x W x D 8-7050-RC 50W compact 110 x 110 x 72 8-7050-SC 50W compact acoustic cowl 105 x 130 x 90 8-7080-R 80W - Round 150 x 150 x 160 8-7080-S 80W - Square 8-7080-F 80W compact slimline 103 x 132 x 50 8-7100-R 100W - Round 155 x 150 x 170 8-7100-S 100W - Square 130 x 202 x 190 8-7100-C 100W - Concealed 245 x 152 x 115 8-7100-F 100W compact slimline 134 x 137 x 65 8-7200-S 200W - Square 120 x 230 x 220 8-7100-RC 100W round compact 118 x 118 x 165 8-7100-T 100W slimline cast 150* x 180 x 76* * = Excluding mounting bracket 8000 Series speakers 8000 series speakers are high specification speakers, suitable for all siren applications, 8000 series speakers feature a compact design philosophy. In particular the 8-8100-MT has a depth of just 85mm. 8000 series speakers are designed to premium performance offering excellent high output with heavy duty components. R Type S Type 8-8120-S 8-8075-R F Type 8-7100-RC 8-8120-R 8-8120-MT C type 8-7100-T Order code H x W x D 8-8075-R 75W Slimline driver 146 x 146 x 153* 8-8120-MT 100W Compact 179 x 160 x 85 8-8120-R 120W Slim driver round 155 x 150 x 148 8-8120-S 120W Slim driver square 130 x 202 x 168 * = Excluding mounting bracket 8-7200 series 8-7050-SC 12 8-7050-RC
speakers 9000 series speakers 9000 series speakers are designed to be mounted into Haztec lightbars. Two types are available, low profile and acoustic. Acoustic types are designed to protrude from the lightbar, whereas low profile types are designed to be mounted within the lightbar. When low profile speakers are fitted within the lightbar, a speaker grille is included incorporating a weather resistant foam barrier to allow the sound to be transmitted whilst providing protection against water ingress. Acoustic type speakers can also be used as stand alone speakers if required, the design is weather resistant without the need for additional protection. 8-9080 / 8-9100 80W / 100W Acoustic (designed to be installed with an exposed front face) or internal (designed to be mounted behind a grille) Designed primarily for use in Xpress Lightbars. 8-9102-B 100W very low profile lightbar speaker designed primarily for use in Xpert lightbars. Requires suitable speaker grille to suit application Order codes H x W x D 8-9102-B 100W Low profile 60 x 272 x 198 Lightbar Speaker installation Where low profile speakers are installed, there are various options for configuring the lightbar to ensure adequate sound transmission. A speaker grille can be added to the centre section allowing lettering to also be incorporated or a purpose designed speaker grille centre can be used. Please contact technical sales to discuss the various options available for different lightbar types. Order codes H x W x D 8-9080A 80W Acoustic 83 x 180 x 251 8-9100A 100W Acoustic 83 x 180 x 251 8-9080B 80W Internal 69 x 182 x 245 8-9100B 100W Internal 69 x 182 x 245 Xpress with speaker grille in centre section 8-9100-SLA 100W ultra low height, lightweight speaker for use in Xpert SL slimline lightbars. c/w acoustic cowl Xpress with dedicated stainless steel speaker grille. Order codes H x W x D 8-9100-SLA 100W Internal 45 x 227 x 215 8-9100-U 50W or 100W under mount speaker, for use in a variety of lightbars, the speaker cowl protrudes below the lightbar base, reducing the space requirement inside the lightbar. Xpert SL with integrated acoustic cowl speaker. Xpress with 8-9100-U speaker Order codes H x W x D 8-9100-U 100W under-mount 85 x 226 x 100 8-9050-U 50W under-mount 85 x 226 x 100 Xpert with 2 x 8-7050-SC speakers 13
WWW.HAZTEC.UK Haztec International Limited Moorfield Estate, Leeds LS19 7BN, England T +44 (0) 113 202 9115 F +44 (0)113 202 9158 E info@haztec.uk www.haztec.uk V3.2