OWNER S GUIDE NV750REF www.poweredliftaway.com 800.798.7398
Thank you for purchasing the Shark Rotator Powered Lift-Away. If you should have a question about your Shark Rotator, please call the Shark Customer service line at 800-798-7398. This Owner s Guide is designed to help you get a complete understanding of your new vacuum cleaner. Please read it carefully and keep it future reference. REGISTER YOUR PURCHASE: www.poweredliftaway.com 800-798-7398 RECORD THIS INFORMATION: Model Number: Date of Purchase (Keep receipt): TECHNICAL SPECIFICATIONS: Voltage: 120V., 60Hz Watts: 1150W Amps: 9.5A RECOMMENDED FILTER CLEANING SCHEDULE: See the MAINTENANCE section for filter cleaning instructions Foam filter: XFF650 Every 3 months Felt Filter: XFF650 Every 3 months HEPA Filter: XHF650 Every 12 months 2 www.poweredliftaway.com
READ ALL INSTRUCTIONS BEFORE USE IMPORTANT SAFEGUARDS When using an electrical appliance, basic safety precautions should always be observed, including the following: WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY: 1 DO NOT use outdoors or on wet surfaces. 2 Unplug from electrical outlet when not in use and before servicing. 3 DO NOT use vacuum cleaner with a damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to SharkNinja Operating LLC for examination, repair, or adjustment. 4 DO NOT pull or carry vacuum cleaner by the cord or use the cord as a handle. 5 DO NOT unplug by pulling on cord; to unplug, grasp the plug, not the cord. 6 DO NOT handle plug or vacuum cleaner with wet hands. 7 DO NOT run the vacuum cleaner over the power cord, close a door on the cord or pull cord around sharp corners. 8 The use of an extension cord is not recommended. 9 DO NOT leave vacuum cleaner when plugged in. 10 Keep cord away from heated surfaces. 11 Turn off all controls before plugging or unplugging the vacuum cleaner. 12 Always turn off the vacuum cleaner before connecting or disconnecting motorized nozzle. 13 Store your vacuum cleaner with the power cord secured around the two cord holders - as shown in the storage instructions. GENERAL USE 14 Use only as described in this manual. 15 DO NOT put any objects into openings. DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow. 16 Keep your work area well lit. 17 Keep the vacuum cleaner moving over the carpet surface at all times to avoid damaging the carpet fibers. 18 DO NOT place vacuum cleaner on unstable surfaces such as chairs or tables. 19 DO NOT allow young children to operate the vacuum cleaner or use as a toy. Close attention is necessary when used near children. 20 DO NOT use without dust cup and/or filters in place. HOSE ATTACHMENTS 21 DO NOT use if air flow is restricted; if the air paths, the hose, or the accessories become blocked, turn the vacuum cleaner off. Remove all obstructions before you turn on the unit again. 22 Keep the end of the hose and accessory openings away from face and body. 23 Keep cleaning tools and hose suction openings away from hair, face, fingers, uncovered feet, or loose clothing. 24 Only use manufacturer s recommended attachments. DUST CUP/FILTERS/ACCESSORIES Before turning on the vacuum: 25 Make sure that all filters are thoroughly dry after routine cleaning. 26 Make sure that dust cup and all filters are in place after routine maintenance. 27 Make sure accessories are free of blockages. 28 Only use filters and accessories provided by SharkNinja Operating LLC. [Failure to do so will void the warranty.] GENERAL CLEANING 29 DO NOT pick up large-sized objects. 30 DO NOT pick up hard or sharp objects such as glass, nails, screws or coins that could damage the vacuum cleaner. 31 DO NOT pick up smoking or burning objects such as hot coals, cigarette butts, fireplace ash or matches. 32 DO NOT use to pick up drywall dust. 33 DO NOT pick up flammable or combustible materials such as lighter fluid, gasoline, or kerosene or use vacuum in areas where they may be present. 34 DO NOT pick up toxic solutions such as chlorine bleach, ammonia, or drain cleaner. 35 DO NOT use in an enclosed space where vapors are present from paint, paint thinner, moth-proofing substances, flammable dust or other explosive or toxic materials. 36 DO NOT vacuum up any liquids. 37 DO NOT immerse vacuum cleaner in water or other liquids. 38 DO NOT use outdoors or on wet surfaces; use only on dry surfaces. 39 Use extra care when cleaning on stairs. SAVE THESE INSTRUCTIONS POLARIZED PLUG To reduce the risk of electric shock, this vacuum cleaner has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT force into outlet or try to modify to fit. FOR HOUSEHOLD USE ONLY 800.798.7398 3
ASSEMBLY 1 Place the nozzle on the floor and insert the wand. 2 Insert the handle into the wand. 3 Slide the POD onto the wand. 4 Attach the hose to the back of the pod. 5 Insert the duster crevice tool and upholstery tool into the accessory clips as shown. 2 1 3 5 4 4 www.poweredliftaway.com
UPRIGHT CLEANING 1 Press POWER and push the surface selector to THICK CARPET/AREA RUG for the best setting for High Pile and Thick Carpets, Area Rugs, and Specialty Carpets if the vacuum is difficult to push or pull due to high suction. This setting produces reduced suction with motorized brush roll. 2 Press POWER and push the surface selector to CARPET/LOW PILE for the best setting for low pile and normal carpet types. High suction with motorized brush roll. This is the default carpet setting. 3 Press POWER and push the surface selector to HARD FLOOR for the best setting for hard floors and accessories. High suction and brush roll off. 4 Place your left foot gently on the floor nozzle and tilt the handle back to start cleaning. Note: The brushroll will only spin once the vacuum is reclined back. NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please set to CARPET/LOW PILE. THEN 1 Best setting for High Pile Carpet, Area Rugs, and Specialty Carpets if the vacuum is difficult to push or pull due to high suction. Low suction with motorized brushroll. 2 Best setting for Low Pile Carpet, and Normal Carpet Types. High suction with motorized brushroll. This is the default carpet setting. 3 Best setting for Hard Floors and Accessories. High suction and brushroll off. 4 800.798.7398 5
ABOVE FLOOR CLEANING 5 To clean with the hose, press the WAND or HANDLE release button (depending on the amount of reach required) then lift handle up. 6 Insert wand or handle directly into desired tool. Handle OR 5 OR Release Wand 6 6 www.poweredliftaway.com
LIFT-AWAY CLEANING Use for portable cleaning on stairs or anywhere 1 Press LIFT-AWAY to lift the pod off the wand. 2 To clean with hose, press the WAND or HANDLE release button then lift handle up. 3 Attach desired cleaning tool. 4 For best suction, push the surface selector to HARD FLOOR setting. NOTE: Select cleaning accessories are included with this model. Additional accessories are available for purchase at www.poweredliftaway.com or by calling 800 798-7398. 2 4 3 1 2 800.798.7398 7
ACCESSORIES NOTE: Select cleaning accessories are included. Others are available for purchase at www.poweredliftaway.com or by calling 800 798-7398. Duster Crevice Tool 158FLI650 Two cleaning tools in one. The crevice tool gives you extended cleaning reach for small spaces, while the dusting brush cleans a multitude of surfaces. Upholstery Tool 159FLI650 Power Brush 150FLI340 Designed for removal of pet hair and ground in dirt from carpeted stairs and upholstery. Caddy XCAD650 Transform your Rotator into a fully powered canister, giving you the freedom to roll the pod along while keeping cleaning tools close by. Hard Floor Genie XHFG650 Durable enough for big crumbs and thumbtacks, but gentle enough for the most delicate dusting on hardwood and tile floors. Dusting Brush 134FLI480 Cleans hard surfaces and upholstery. 8 www.poweredliftaway.com
HELPFUL TIPS POWER BUTTON 1 The POWER button turns the vacuum on. SURFACE SELECTOR 2 Selecting the Hard Floor setting will stop the brushroll from spinning and allow you to clean bare floor and above floor surfaces with ease. Thick Carpet/Area Rug and Carpet/Low Pile settings refer to the strength of the suction power. Carpet/ Low Pile is the default carpet setting and gives you the greatest suction and deep cleaning power. Thick Carpet/Area Rug deep cleans higher pile, thicker carpets, specialty carpets, and area rugs with less suction. If the vacuum is difficult to push or pull on certain carpets or area rugs, you can either disengage the brush roll and use the suction only setting or switch the surface selector to Thick Carpet/Area Rug mode. NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please set to CARPET/LOW PILE. CORD HOOKS 3 For quick cord access, rotate upper hook 180 and remove cord. Rotate it back for cord storage. HEADLIGHTS 4 Illuminozzle designed to illuminate debris in dark areas, the headlights illuminate any time the power is on. The headlights are long-lasting and designed to last the life of the vacuum. FILTERS The LED light on the Illuminator handle will enable you to see dark areas when using the handheld accessories. 5 Remember to clean your filters regularly under normal use. Also, for optimal performance, tap clean filters between washes as needed. 1 2 3 5 4 800.798.7398 9
MAINTENANCE EMPTY THE DUST CUP 1 Pull up on the dust cup release latch and lift the dustcup off the pod. 2 Holding the dust cup over a garbage bag or can, press the bottom empty release latch. 3 Press the top dust cup release latch to access the dust screen and remove built-up debris as required. 1 3 2 10 www.poweredliftaway.com
MAINTENANCE CLEAN THE FILTERS See cleaning schedule on page 2 4 With the dust cup removed, remove and rinse the foam and felt filters every 3 months. Let air dry completely before replacing. Hand wash only. Tap loose dirt off filters between washes as needed. 5 Once a year open the filter grill and remove and rinse the HEPA filter. Let air dry completely before replacing. Hand wash only. FOAM FILTER 4 FILTER FRAME FELT FILTER HEPA 5 800.798.7398 11
MAINTENANCE CHECK FOR BLOCKAGES REMOVE AND INSPECT: 1 HOSE AND TUBES Remove floor nozzle and extension wand and shine a flashlight up from the bottom to check for possible blockage. Remove dustcup and hose to check intake opening and hose elbow. 2 BOTTOM OF FLOOR NOZZLE a b Using a coin, turn the locking screws to the unlock position and pull up to expose the airway. Remove any obstructions, close and relock. Remove any string, carpet fibers or hair that may be wrapped around the brushroll. a a 12 www.poweredliftaway.com
TROUBLE-SHOOTING GUIDE Vacuum is not picking up dirt. No suction or light suction Check filters to see if they need cleaning. Follow instructions for rinsing and drying the filters before re-inserting back into the vacuum. Dust cup may be full; empty dust cup. Check hose, hose connections, nozzles and accessories for blockages; clear blockages if required. Vacuum lifts area rugs Turn off the unit to disengage the brush roll and restart with the POWER button for suction only cleaning. Brush roll does not spin Pull the handle toward you and release the floor nozzle to disengage the auto-off feature. Make sure that the carpet height selector is not on the HARD FLOOR setting. Immediately turn off and unplug vacuum, disconnect the nozzle and remove blockage before reconnecting and turning vacuum back on. Vacuum turns off on its own If the hose connection is not properly latched, it can cause a poor electrical connection and the hose can come loose and power vacuum OFF. 1. Turn the unit off; unplug the vacuum. 2. Empty the dust cup and clean filters. 3. Check for blockages in hose, accessories and inlet openings. 4. Remove cord from cord hook so hose latch can be seen and engaged. Reassemble. 5. Ensure hose latch makes an audible click where the hose meets the back of the vacuum. Also, make sure the hose latch makes a click where the wand plugs into the neck of the floor nozzle, and where the handle plugs into the wand. The connection of the back of the dust cup to the hose often requires additional force. Ensure you hear the audible click. 6. Pull on hose to ensure latch is fully engaged. 7. If latch is not flush to hose connector, hose is not fully engaged. 8. Plug in the vacuum. 9. Restart the vacuum. This vacuum cleaner is equipped with a motor protective thermostat. If for some reason your vacuum overheats, the thermostat will automatically turn the unit off. Should this occur, perform the following steps to restart the motor thermostat: 1. Turn the unit off. 2. Unplug the vacuum. 3. Empty the dust cup and clean filters. 4. Check for blockages in hose, accessories and inlet openings. 5. Allow the unit to cool for a minimum of 45 minutes. 6. Plug in the vacuum. 7. Restart the unit. Note: If vacuum still does not start, contact Customer Service at: 800 798-7398. 800.798.7398 13
NOTES 14 www.poweredliftaway.com
ONE HUNDRED EIGHTY (180) DAY REFURBISHED PRODUCT LIMITED WARRANTY SharkNinja Operating LLC warrants this product to be free from material defects and workmanship for a period of one hundred eighty (180) days from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and exceptions. The liability of SharkNinja Operating LLC is limited solely, at our option, to either: 1) the cost of the repair or replacement of the unit with a refurbished unit; or 2) an upgrade to a similar model refurbished unit of equal or greater value. Replacement units/parts will be warranted for the remaining portion of the original (180) one hundred eighty day warranty period. This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. This Limited Warranty does not cover damage caused by accident, misuse, abuse, negligent handling, incorrect voltage, vandalism, unsuitable environments, damage due to faulty packaging or mishandling in transit, natural disasters or other damages beyond SharkNinja Operating LLC s control. This Limited Warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been performed by a repair person not authorized by SharkNinja Operating LLC. Since this unit has been represented and sold as a refurbished item, this Limited Warranty does not apply to cosmetic damages or defects, including, but not limited to, scratches, scuffs, dents, or dings. Operating the unit in violation of the instructions in the owner s manual will void the warranty terms. If your appliance fails to operate properly while in use under normal household conditions within the Limited Warranty period, you may return the complete appliance and accessories with proof of purchase and date, freight prepaid. For Customer Service support and product specialists, call 1-800-798-7398 or visit our website sharkclean.com. If the appliance is found by SharkNinja Operating LLC to be defective, in SharkNinja Operating LLC s sole discretion, we will repair or replace it as set out in the second paragraph above, free of charge. Proof of purchase date and a check made payable to SharkNinja Operating LLC in the amount of $19.95 to cover the cost of return shipping and handling must be included.* Non-durable parts including, but not limited to, filters, brushes and electrical parts which normally require replacement are specifically excluded from this Limited Warranty. This Limited Warranty is extended to the original purchaser of this refurbished unit and excludes all other legal, implied and/or conventional warranties. The responsibility of SharkNinja Operating LLC, if any, is limited to the specific obligations expressly assumed by it under the terms of this Limited Warranty. In no event is SharkNinja Operating LLC liable for incidental or consequential damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you. This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from province to province. *IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and to attach tag to item before packing with your name, complete address and phone number with a note giving purchase information, model number and what you believe is the problem with the item. We recommend you insure the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package ATTENTION CUSTOMER SERVICE. 800.798.7398 15
WE WANT TO HEAR FROM YOU! JOIN THE CONVERSATION WATCH AND LEARN MORE www.sharkrocket.com 1.800.798.7398 @sharkcleaning youtube.com/shark SharkNinja Operating LLC Newton, MA USA 02459 Ville St. Laurent, Québec Canada H4S 1A7 NV750REF_31_IB_160518_5 2016 SharkNinja Operating LLC Illustrations may differ from actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice. For SharkNinja U.S. Patent information visit sharkninja.com/uspatents. Lift-Away, Rotator and Shark are registered trademarks of SharkNinja Operating LLC. www.poweredliftaway.com 800.798.7398