ZEN MIRROR. Install / Operating Manual. Table of Contents

ZEN MIRROR Install / Operating Manual Single-sided wall mounting ZEN MIRROR ⑥ ①Double-sided free-standing frame ②Single-sided free-standing frame ③Single-sided wall mounting frame ④Double-sided free-standing mirror ⑦⑧⑨ ⑤Single-sided free-standing mirror ⑥Single-sided wall mounting mirror ⑦Top board - White ⑧Top board - Natural brown ③ ⑨Top board - Natural Single-sided free-standing Double-sided free-standing ⑤ Table of Contents Description of Warning Symbols Safety Precautions Precautions for Use Before Using This Product Accessories Name of Each Part Dimensions Before installation Installation Daily maintenance Daily Inspection Standard Duration of Use Consumable Supplies Disposing of the Product After-sales Service Speciﬁcations MEMO Information ２２４５５５６９９１２１３１３１３１３１３１４１５１６ ④ To the installer The instructions should be thoroughly read and understood before installation to ensure that ZEN Mirror UNIT is installed correctly. After installation, give these instructions to the customer. To the customers ⑦⑧⑨ ② Customers must ask professional to install ZEN Mirror UNIT. Customers must not install ZEN Mirror UNIT by themselves. Customers must store these instructions in a safe place so as not to lose them. * The actual shape of ZEN Mirror UNIT and the images and dimensions listed in these instructions may be modiﬁed and are subject to change without notice. ⑦⑧⑨ Thank you for purchasing this Takara Belmont product. The instructions contained in this booklet should be thoroughly read and understood before use. Using this product before reading this operating instructions may result in an accident. This product is an industrial mirror unit designed for barbers and hair salons. Only use this product for its intended purpose and do not use it for non-hairdressing work. Keep this instruction and refer back to them when required. ① Version 1 1 February 2018

Description of Warning Symbols Before the use of the product The "Safety Precautions" and "Precautions for Use" contained in this booklet should be thoroughly read and understood before use. Precautions listed here The precautions listed here are to ensure that this product can be used safely, and to prevent any danger or risk to the person using this product or those around them. These precautions are important for ensuring safety. Adhere to these precautions at all times. Takara Belmont is not responsible for any danger or risk to the person using this product or those around them due to accidents if this product is used without adhering to the "Safety Precautions"and "Precautions for Use". In this case, the person failing to adhere to the "Safety Precautions" and "Precautions for Use" will be responsible for any danger or risk incurred. Detailed descriptions of symbols are provided below. Read and understand these symbols thoroughly before reading this manual. Symbols Warning If this symbol is ignored and the product is used, "there is the risk of death or serious injury to the user". Caution If this symbol is ignored and the product is used, "there is the risk of light or moderate injury or physical damage". Note Description of "ideal points to adhere to for safety". Common danger, warning and caution notiﬁcations Prohibited disassembly or repairs/modiﬁcations Common prohibited actions Guidance or instruction regarding common user actions Safety Precautions Warning Clean by standing on a steady stepping stool or ladder. Do not push, lean on, stand on or hang from the product. While cleaning the upper part of the product, use stable step ladder. Beware of falling and injuring yourself. Do not push, lean on, stand on and hang from the product. It may cause accidents such as a fall which could cause injuries or breakage of the product. Install in a stable place. Do not use this mirror for purposes other than hair-cutting, beauty treatment, or esthetic treatment. Ensure that the product is installed and ﬁrmly attached onto a ﬂat and solid ﬂoor or wall. Beware of the danger of the product falling and injuring you. This product is speciﬁcally designed for use in barbershops, beauty salons, and esthetic salons. Do not use this mirror for purposes other than using it in combination with hair heaters, shampoo machines, or other devices for hair-cutting, shampooing, hair coloring, perming, or esthetic treatment. It may damage the mirror or result in accidents. Make the wall with adequate strength. This product is ﬁxed with tapping screw directly onto the wall. In the case of the wall mounted version, prepare a concrete panel of more than 12mm thickness or a base batten cleat with the equivalent strength. 2

Safety Precautions Warning Hold the mirror frame when wiping the mirror. Do not disassemble, repair, or modify the mirror. If you do not hold mirror frame when wiping the mirror, it may cause accidents and injuries. Only customer service staﬀ are permitted to disassemble or repair the product. Neglecting this caution may cause accidents or injuries. Do not allow persons other than barbers, hair dressers, or estheticians to use this mirror. Shocks to the equipment in operation. Do not expose the product to shocks or impacts during operation. Neglecting this warning may result in falling of the product, thus causing breakage, or injuries This product is speciﬁcally designed for use in barbershops, beauty salons, and esthetic salons. People other than licensed barbers, hairdressers, or estheticians should not use this mirror. Do not sprinkle water on the product. Pay attention for carrying. Be careful to not sprinkle water on the product. If water comes into contact with the product, wipe it oﬀ immediately. Do not hold the bottom part of the product when installing or moving the product. This could cause the product to be imbalanced and fall. Slide the tray in/out slowly. Be careful of product sharp edges, corners and irregularities. When opening and closing the tray do so slowly, or it may break the tray. When cleaning the product be careful of the corners, edges and irregularities as it might cause injury. Do not overload on the sliding tray. Do not weigh the sliding tray down. (Static load is up to 2kg only) Do not drop objects from a height, lean on or put an excessive weight on it. It may cause damage or breakages of the product. The product may fall and cause injury. Do not use any other item except a hairdryer in the allocated storage compartment. If storing more than the weight of a hairdryer in the holder, it may cause damage or injury. 3

Precautions for Use Caution Avoid direct sunlight or heat from a heater. If chemicals adhere, wipe it off immediately. Neglecting this caution may result in deformation,discoloration, or deterioration of the upholstery and surfaces. If chemicals such as hair color adhere, immediately wipe them oﬀ. Failure to follow this caution may cause discoloration or deterioration of the product, or discoloration or damage of sewing threads and surfaces. Wipe the mirror to remove any water from the mirror after use. Do not apply chemicals or heat to the mirror. Leaving water on the mirror may cause malfunction,discoloration, or damage to the mirror, or stains may remain permanently on the mirror. Do not wipe the mirror with chemicals when cleaning. Do not apply heat. It may cause damage or discoloration. If a chemical adheres on the leather or metal part, immediately wipe it oﬀ. Do not use a strong acid and strong alkaline detergent. Do not use any harsh chemicals when cleaning the product, it may cause damage. Do not use any abrasive. Do not place a sharp object on the mirror. Do not use any abrasives when cleaning. Do not use a harsh cleaning tool such as an abrasive or a sponge containing an abrasive, a metal scourer, or a nylon sewage. It may cause scratches. The mirror may be damaged if a sharp object such as scissors touches the mirror. Do not use the mirror outdoors. Do not put any products with a rough base directly on the shelf. The mirror is designed for indoor use only. Do not place it outdoors or in vehicles. Always use the mirror inside barbers, hair salons, and sthetic salons. Using the mirror outdoors may cause damage to the mirror. Do not place any products that have a rough base or edges directly on the shelf as this may cause damage to the surface, which could cause injury. 4

Before Using This Product The JIS standard is applied when manufacturing the mirrors. Due to this, some unevenness within the mirror may occur on the surface of glass. Please note there may be some image distortion due to this process. The full mirror is not ﬁxed with the frame, only the middle. Because of this, the top and bottom parts of the mirror (when touching it) will appear to be loose, this is done intentionally. Accessories Conﬁrm the bundled items below. Install / Operating Manual Single-sided wall mounting Single-sided free-standing Double-sided free-standing Dryer holder １１２ Slide table １１２ Rubber for slide table １１２ Wall hook metal １ Code rail １ M6 15 truss screw... 10 M5 20 pan head screw...2 M5 hex nut...2 4 40 truss tapping screw...6 M4 20 pan head screw...1 Fastening parts M6 12 countersunk screw... 4 M6 15 truss screw... 8 M5 20 pan head screw.. 2 M5 hex nut... 2 M4 20 pan head screw... 1 M6 12 countersunk screw...4 M6 15 truss screw... 16 M4 12 truss screw...2 M5 20 pan head screw...4 M5 hex nut...4 M4 20 pan head screw...2 Name of Each Part <Single-sided wall mounting> <Single-sided free-standing> mirror frame mirror frame mirror mirror <Double-sided free-standing> mirror extension cord hook top board top board top board extension cord hook hole for extension cord dryer holder hole for extension cord dryer holder slide table adjuster dryer holder adjuster lower frame slide table mirror frame slide table lower frame 5

Dimensions 286 150 87 71 254 67 <Single-sided wall mounting> 205 650 730 When installing the product, use the adjuster to make the top board horizontal. The factory default position of the adjuster is the lowest position of the product. The height range of the adjuster is 14 mm, this means the height can be adjusted up to 14 mm. The ﬁgure shows the dimension that the adjusters are 7mm higher from the lowest position (Midway position). 71 640 200 120 32 7 (distance between the mirror and the lower frame) 82 200 1575 907 position of screws to fix the wall hook metal 225 225 98 6 709 750 670 655 114 30 20 1657 position of screws to fix the lower frame

254 358 150 71 87 67 <Single-sided free-standing> 205 650 71 730 640 121 7 646 709 750 114 30 20 1650 900 32

254 150 71 87 67 540 71 843 67 254 87 <Double-sided free-standing> 71 640 237 66 750 114 30 20 1650 900 32 8 646 205 709 650 808

Before installation Before installing, refer to the product dimensions on pages 6 to 8 and to decide the best mounting position. In the case of the wall mounted version, the wall surface requires at least a 12 mm thick concrete panel. In the case of plaster boards or plywood boards of 12 mm or less, please reinforce them by inserting the girder at the wall ﬁxing screw position. Please ensure that 2 sets per dryer holder, combining M5 x 20 pan head screws and M5 hex nut M5 hex nuts as shown on the right. Required tools 8mm Spanner M5 20 pan head screw (+) Phillips screwdriver Installation <Single-sided free-standing / double-sided free-standing > ①Attach the dryer holder referring to page 11. ②Insert the mirror frame into the lower frame and ﬁx it ﬁrmly with M6 countersunk screw. ③Attach the cord rail to the lower frame with 2x M4 truss screws. (Only for double-sided free-standing ) mirror frame ④Attach the rubber for slide table to the top board with M4 pan head screw. Then attach the slide table to the top board with 4x M6 truss screws. ② ⑤Attach the top board to the lower frame with 4x M6 truss screws. ⑥Turn the adjuster to make the top board horizontal and to prevent rattling. top board ⑤ ③ cord rail rubber for slide table slide table ④ ② ② lower frame ① ⑤ ⑤ ⑥adjuster 9 ①dryer holder ⑥adjuster

<single-sided wall mounting> Attach the lower frame to the wall as shown in the ﬁgure below and temporarily ﬁx with 3x screws as shown. Use the adjuster to make the top of the lower frame horizontal. Then tighten the 3x screws ﬁrmly. The factory default position of the adjuster is the lowest position of the product. The height range of the adjuster is 14 mm, this means the height can be adjusted up to 14 mm. The ﬁgure shows the dimension that the adjusters are 7mm higher from the lowest position (midway position). Hold the wall hook metal horizontally and ﬁx it with 3x tapping screws provided at the position shown. After that, ﬁx the dryer holder, the mirror frame, the sliding tray, the top board with the provided screws the same way as the free-standing type in page 9. center line wall hook metal 20 0 20 0 25 0 820 25 0 323 323 lower frame adjuster 10 670 655 ﬁxing screws 1575 2 25 1540 2 25

How to install hairdryer holder frame ①Insert the hairdryer holder all the way into the frame. Fig. 1 ① ②Attach the prepared sets of a screw and nuts to the frame as shown in Figure 1. (2 sets for each dryer holder ) ② ③Adjust the end of screw reaching the concave surface of the dryer holder as shown in Fig. 2. Then adjust nuts stick to each other. When the position is decided at both places, hold the screw with the (+) Phillips screwdriver and fully tighten the nut with 8mm Spanner. ④Conﬁrm the dryer holder is attached ﬁrmly. If there is lack of ﬁrmness, repeat process ③ again and tighten securely. In case of double-sided free-standing, attach the other dryer holder in the same way. dryer holder set of a screw and nuts concave surface of the dryer holder Fig. 2 M5 hex nut M5 20 pan head screw After installation Check the following items. Conﬁrm that there is no rattling of the product Push the product gently to check if the installation of the product is unstable or if there is any movement. If it seems unstable or there is a lot of movement, check the screws of the mounted parts once again. Check the appearance part for damage such as scratches 11

Daily maintenance Clean the mirror every day at the end of the day. Leaving it unclean may cause unremovable stains or mold to grow. Alcohol Caution Do not use volatile chemicals such as thinners, alcohol, benzene, nail polish remove, gasoline or kerosene, abrasive wax, abrasive sponges and so on. Thinner Wax with Abrasive Kerosene Chemicals Mirror part Wipe with a dry soft cloth. If the dirt is severe, wipe oﬀ the dirt with a neutral detergent diluted to about 10% with water. After wiping oﬀ with detergent, wipe with a soft cloth squeezed, wipe dry. If water or chemicals are applied, wipe oﬀ moisture immediately even if it is not after the end of the day's work. If left unattended, it may cause alteration or corrosion. Warning When cleaning with a step ladder etc, use a stable footstep. Falling may result in injury. When wiping the mirror, hold down the mirror frame. Failure to do so may cause accidents or injuries such as falling or breakage of the product. Wood pieces of the product Wipe gently with a dry soft cloth. In case of heavy contamination, wipe with a soft cloth with water or lukewarm water, wipe it ﬁrmly, wipe oﬀ moisture thoroughly with dry cloth. If water or chemicals are applied, wipe it oﬀ immediately. There is a risk of damage if left unattended. Caution The use of harsh chemicals such as thinner, alcohol, gasoline, kerosene or wax, or an abrasive, sponge with abrasive and detergent containing organic solvent, acidic, alkaline, chlorine based detergent may cause the wood surface coating to wear down. Do not use abrasive substances or sponges. Metal parts Lightly wipe the metal part with a soft and dry cloth. No Wet. No Water. Wipe oﬀ water or chemical splashes immediately. Do not leave a stain until the end of the day. Water or chemical causes rust on the metal. If the metal part is extremely dirty, wipe with a Neutral detergent diluted 10 times with water. Then wipe with a wet cloth and a dry cloth in order. Caution Be aware and pay attention to the metal parts on the back side of the mirror top. Neglecting this caution may result in harming or other parts. 12

Daily inspection To ensure safe use of the product, do the following check once a month. Inspection Conﬁrm that there is no shake / tilt of the main body of the product, rattling of the mirror, no ﬂoating due to peeling of the adhesive. It may cause the product body to tip over or cause the mirror to fall. If any of the above occurs, discontinue use and contact the call center. Standard Duration of Use The standard duration of use for this product is seven years. The standard duration of use is a guide for the standard duration that this product can be used properly from a safety perspective with conducting appropriate maintenance and inspections (including replacement of parts) and the standard usage conditions for each product. This is not the same as the warranty duration. Consumable Supplies The following parts are "consumable supplies" and wear, degradation, changes in external appearance and damage are expected. (* The level and period of wear, degradation or damage may diﬀer depending on the environment and conditions that the customer uses this product in) Inspections or replacement of parts will be required if there is extensive wear, degradation or damage. The warranty is against manufacturing faults. Not against misuse. External scratches or dirt, degradation or fading of the following external parts are not covered by warranty. mirror mirror frame top board slide table dryer holder lower frame adjuster Disposing of This Product When disposing of this product or the replaced parts, obey the appropriate laws and regulations at the time and the place to dispose of them. After-sales Service To request after-sales service, contact your closest dealer. 13

Specifications Weight Usage environment ① Double-sided free-standing frame ② Single-sided free-standing frame ③ Single-sided wall mounting frame ④ Double-sided free-standing mirror ⑤ Single-sided free-standing mirror ⑥ Single-sided wall mounting mirror ⑦ Top board - white ⑧ Top board - natural brown ⑨ Top board - natural Operating temperature of ５３５ Operating humidity of ４５８５ 14 １５５１４５１００２１５１８５１４５３０３０３０

MEMO 15

TAKARA BELMONT CORPORATION 1-1, 2-Chome, Higashi-shinsaibashi,Chuo-ku,Osaka,Japan TEL : (06) 6213-5945 FAX : (06) 6212-3680 Printed in Japan 1E06DPA0 16