www.hafele.com.au ALTO DRAWER SYSTEMS exclusively Brought to you by Häfele
Häfele - ALTO DRAWER SYSTEMS / 07.16 Drawer front installation and removal Adjustment Smooth and effortless The Alto drawer system offers an affordable solution coupled with quietness, smoothness and ease of use. The synchronised opening action of the Alto drawer is supremely comfortable, thanks to proven knowledge behind this soft-closing technology, leaving you in no doubt of its quality. Options aplenty With a wide variety of drawer options available - including 86mm and 1mm standard drawer options, and 164mm and 4mm pot drawer options - the Alto drawer system suits almost every application. Combined with length options from 270mm to 500mm, and multiple Alto-Box infill panels, the Alto drawer ticks all of the boxes. Tried and tested The Alto drawer system has been independently tested and passed the exacting European DIN EN15338 Level 3 standards. This was achieved with a full 35 kg weight capacity over 60,000 opening and closing cycles. > Load capacity (kg): 35 > Material: steel drawers > Finish: Powder coated, white > Version: full extension, with integrated soft-close > Adjustment: front: 2 dimensional, also tilt for drawer front adjustment with railing system Adjustment horizontally ± 1 mm, Adjustment vertically ± 2 mm > Mounting: front fix brackets snap into drawer sides with knock-in mounting on adjustment tighten loosen Drawer insertion and removal 2
ALTO DRAWER SETS 86MM 1 mm > Height (mm): 86 drawer sides and cover caps > Includes: Drawer sides, runners, knock-in front fixing brackets, back panel brackets and white cover caps. Mounting > Height (mm): 1 drawer sides and cover caps > Includes: Drawer sides, runners, knock-in front fixing brackets, back panel brackets and white cover caps. Mounting 44.5 min. 107 cabinet 56 102 37* min. 54 drawer runner Packing: 1 set 12 224 min. 56 back min. 54 270 552.66.760 300 552.66.761 350 552.66.762 400 552.66.763 450 552.66.764 500 552.66.765 min. 141 cabinet 56 136 37* min. 54 drawer runner Packing: 1 set 12 min. 56 224 back 270 552.67.760 300 552.67.761 350 552.67.762 400 552.67.763 450 552.67.764 500 552.67.765 min. 54 3
Häfele - ALTO DRAWER SYSTEMS / 07.16 ALTO DRAWER SETS 164MM 4 mm > Height (mm): 164 drawer sides and cover caps > Includes: Drawer sides, runners, knock-in front fixing brackets, back panel brackets, gallery rails and white cover caps. Mounting 44.5 > Height (mm): 4 drawer sides and cover caps > Includes: Drawer sides, runners, knock-in front fixing brackets, back panel brackets, gallery rails and white cover caps. Mounting 44.5 min. 185 180 cabinet 56 10 37* 2 min.54 drawer runner Packing: 1 set 12 min. 56 224 64 back min. 54 270 552.63.760 300 552.63.761 350 552.63.762 400 552.63.763 450 552.63.764 500 552.63.765 min 225 2 cabinet 56 10 12 1 min 54 37* drawer runner Packing: 1 set min 56 224 64 64 back 1.5 min 54 270 552.64.760 300 552.64.761 350 552.64.762 400 552.64.763 450 552.64.764 500 552.64.765 4
Alto-box Single Metal Hanging Panel Double Metal Hanging Panel powder coated, steel > To suit: 164 mm drawer sets powder coated, steel > To suit: 4 mm drawer sets 400 552.6.753 450 552.6.754 500 552.6.755 Packing: 1 pair 400 552.6.763 450 552.6.764 500 552.6.765 Packing: 1 pair 5
Häfele - ALTO DRAWER SYSTEMS / 07.16 Standard Internal Front Panel 86 mm Drawer Set Tall Internal Front Panel 4 mm Drawer Set Standard internal front panel Tall internal front panel and cross rail Front panel, 1074 mm 552.6.780 Packing: 1 piece Front panel, 1074 mm 552.6.780 Cross rail, 1074 mm 552.6.786 Packing: 1 piece STANDARD front panel connectors Tall front panel connectors Packing: 1 pair Assembly Note: Panel width = Internal cabinet width less 87 mm 552.6.70 Packing: 1 pair Handle for internal front panel Packing: 1 piece Assembly Adjustment Note: Panel width = Internal cabinet width less 87 mm Cross rail width = Internal cabinet width less 70 mm 552.6.71 552.6.7 6
Back Brackets Gallery Rails Drawer height (mm) Packing (pairs) 86 50 552.71.71 1 50 552.6.72 164 50 552.6.74 4 40 552.6.75 Packing: 40-50 pairs > Version: for 164 or 4 mm drawer sets > Includes: includes both knock-in and screw-on front fixings 270 552.6.770 300 552.6.771 350 552.6.772 400 552.6.773 450 552.6.774 500 552.6.775 Packing: 25 sets 7
Häfele - ALTO DRAWER SYSTEMS / 07.16 Drawer Front Marker Jig Accessories! " $ %, plastic > Area of application: used to mark the front fix bracket drilling positions on the. Packing: 1 pair Gallery Rail Marking Jig 552.6.! Screw-on front fix bracket 558.50.0 " Knock-in front fix bracket 552.6.7 Expanding dowel front fix bracket 552.6.5 $ Knock-in gallery rail connector 552.6.8 % White cover cap 552.61.770 Packing: 100 pieces Note: Customised cover caps are available upon request (MOQ = 2,000 pieces), plastic > Area of application: Place over installed front fix bracket to determine gallery rail position on drawer front Packing: 1 piece 552.6.0 8
Technical information Cutting dimensions - Alto 86 Drawer Cutting dimensions - Alto 1 Drawer 1 Bottom panel width = ICW - 75 + 0.5 mm Bottom panel length = Runner length - 5 mm 1 Bottom panel width = ICW - 75 + 0.5 mm Bottom panel length = Runner length - 5 mm 2 Panel height = 70 mm Back panel width = ICW - 8 + 0.5 mm 2 Panel height = 104 mm Back panel width = ICW - 8 + 0.5 mm ICW 16 mm material thickness ICW: Internal cabinet width ICW 16 mm material thickness ICW: Internal cabinet width Cutting dimensions - Alto 164 Drawer Cutting dimensions - Alto 4 Drawer 1 Bottom panel width = ICW - 75 + 0.5 mm Bottom panel length = Runner length - 5 mm 2 Panel height = 148 mm Back panel width = ICW - 8 + 0.5 mm 1 Bottom panel width = ICW - 75 + 0.5 mm Bottom panel length = Runner length - 5 mm 2 Panel height = 188 mm Back panel width = ICW - 8 + 0.5 mm ICW 16 mm material thickness ICW: Internal cabinet width Drawer Base Drilling (Varianta Screws) 424mm 26mm 168mm 40mm 10mm Ø5mm for Varianta Screw ICW 16 mm material thickness ICW: Internal cabinet width
Häfele - ALTO DRAWER SYSTEMS / 07.16 Drawer Front Drilling Dimensions (mm) Gallery rail for Alto 4 Drawer Gallery rail for Alto 164 Drawer 2 1 54 plus Overlay plus overlay ø10 Cabinet End Panel Drilling Dimensions (mm) D C B A 37 224 Runner Drilling Dimensions (mm) 37* 224 56 *Dimension is 42 mm for internal drawer application Dimension A = 56 mm plus overlay Dimension B = Dimension A plus drawer front plus gap Dimension C = Dimension B plus drawer front plus gap Dimension D = Dimension C plus drawer front plus gap 10
index 552. 552.61.770... 8 552.63.760... 4 552.63.761... 4 552.63.762... 4 552.63.763... 4 552.63.764... 4 552.63.765... 4 552.64.760... 4 552.64.761... 4 552.64.762... 4 552.64.763... 4 552.64.764... 4 552.64.765... 4 552.66.760... 3 552.66.761... 3 552.66.762... 3 552.66.763... 3 552.66.764... 3 get up to date stock & pricing Information, on all the products In this catalogue. plus much more! 552.66.765... 3 552.67.760... 3 552.67.761... 3 552.67.762... 3 552.67.763... 3 552.67.764... 3 552.67.765... 3 552.6.753... 5 552.6.754... 5 552.6.755... 5 552.6.763... 5 552.6.764... 5 552.6.765... 5 552.6.770... 7 552.6.771... 7 552.6.772... 7 552.6.773... 7 552.6.774... 7 552.6.775... 7 552.6.780... 6 552.6.780... 6 552.6.786... 6 552.6.70... 6 552.6.71... 6 552.6.72... 7 552.6.74... 7 552.6.75... 7 552.6.7... 6 552.6.0... 8 552.6.5... 8 552.6.7... 8 552.6.8... 8 552.6... 8 552.71.71... 7 558. 558.50.0... 8 the new hafele.com.au! register now!
7.04.52 ALTO DRAWER SYSTEMS - 07.16 Häfele Australia Pty. Ltd. 8 Monterey Road Dandenong Victoria 3175 Phone: 1300 65 728 Fax: (03) 212 01 Email: info@hafele.com.au www.hafele.com.au Häfele New Zealand Ltd. 16 Accent Drive East Tamaki Auckland 13 Phone: 0800 442 335 Email: info@hafele.co.nz www.hafele.co.nz HÄFELE LOCATIONS: Australia I MELBOURNE I SYDNEY I NEWCASTLE I BRISBANE I ADELAIDE I LAUNCESTON I HOBART I PERTH New Zealand I AUCKLAND I WELLINGTON I CHRISTCHURCH