Laboratory Equipment

Laboratory Equipment All Stuart equipment is supplied with the anti-microbial protection BioCote inhibiting the ability of bacteria to reproduce. Dunn Labortechnik GmbH Thelenberg 6 53567 Asbach Tel. +49 (0) 26 83 / 4 30 94 Fax +49 (0) 26 83 / 4 27 76 e-mail: info@dunnlab.de Internet: www.dunnlab.de

Contents Product Page Accessories for Hotplates and Magnetic Stirrers 9 Aluminium Blocks for Block Heaters 3 Block Heaters 3 Bottle Top Dispensers 23 Centrifuges (Mini Centrifuges) 4 Colony Counters 13 Digital Burettes 23 Flask Shakers 16 Flocculators and Accessories 21 Heating Blocks for Round Bottom Flasks 8 Heating Mantles 21 Hotplates 5 Homogenisers and Accessories 19 Hybridisation Incubator and Bottles 11 Incubators (for multi-well plates, with shakers, rockers, rotisserie, for hybridisation, for total visibility, with cooling etc.) 11-13 Infrared Hotplate 5 Magnetic Stirrers with or without Hotplate 6-7 Melting Point Apparatus with Accessories 20 Mini Centrifuges 4 Overhead Stirrers 14 Protective Covers, Heating Blocks, and Baths for Hotplates 9 Recirculating Coolers 21 Rockers (3D gyratory or see-saw wave motion) 14 Roller Mixers 17 Rotary Evaporators and Accessories 22 Rotators 16-17 Retort Rods and Temperature Probes for Hotplates and Magnetic Stirrers with Hotplate Sample Concentrator 4 Shakers 15 Stirrers with or without Hotplate 6-7 PTFE-Hotplate 5 Temperature Controller for Hotplates and Magnetic Stirrers with Hotplate 9 Vortex Mixers 4 Water Baths (also with shaking feature) 10 Water Stills 18-19 Also available - further information on request: 9 Spectrophotometers Bibby Scientific Jenway ph Meters Bibby Scientific Jenway Thermocyclers Bibby Scientific Techne 2

Block Heaters Temperature: up to 130 C or 200 C Heater with digital or analogue control available 2 heaters available with independent dual temperature control for 2 blocks (SBH130DC, SBH200DC) Aluminum blocks are not included and have to be ordered separately SBH130 SBH130DC SBH130 SBH130D SBH200D SBH130D/3 SBH200D/3 SBH130DC SBH200DC SBH/2 SBH/3 SBH/4 Block heater, analogue control, Hot warning light, temperature range: ambient + 8 C to 130 C C, ± 0.1 C, 2 blocks required (have to be ordered separately) Block heater, digital control and display, temperature range: ambient + 8 C to 130 C C, ± 0.1 C, 2 blocks required (have to be ordered separately) See SBH130D, but temperature range: ambient + 8 C to 200 C, ± 0.1 C, 2 blocks required (have to be ordered separately) See SBH130D, temperature range: ambient + 8 C to 130 C, ± 0.1 C, 3 blocks required (have to be ordered separately) See SBH130D, but temperature range: ambient + 8 C to 200 C, ± 0.1 C, 3 blocks required (have to be ordered separately) Block heater, with independent dual temperature control for 2 blocks, digital control and display, temperature range: ambient + 8 C to 130 C, ± 0.1 C, 2 blocks required (have to be ordered separately) Block heater, with independent dual temperature control for 2 blocks, digital control and display, temperature range: 50 C to 200 C, ± 0.1 C, 2 blocks required (have to be ordered separately) Safety cover for 2 block models Safety cover for 3 block and dual control models Block extraction tool Aluminium Blocks for use with Stuart Block Heaters Blocks can be used in different combinations. They all have a separate hole to accommodate a thermometer if desired. Dimensions of all blocks (w x d x h) 75 x 95 x 50 mm except SHT/96 and SHT1/384 with 150 x 95 x 61 mm. Please note all Block Heaters will only operate effectively if the full compliment of blocks is present. SHT1/0 SHT1/10 SHT1/12 SHT1/12/33 SHT1/13 SHT1/16 SHT1/19 SHT1/20 SHT1/21 SHT1/22 SHT1/25 SHT1/28 SHT1/30 SHT1/30/1 SHT1/33 SHT1/48 SHT1/80 SHT1/96 SHT1/384 Plain block For 20 tubes with a diameter of 10 mm, hole size (Ø x D): 10.5 x 47 mm For 20 tubes with a diameter of 12 mm, hole size (Ø x D): 12.6 x 47 mm For 20 tubes with a diameter of 12 mm, hole size (Ø x D): 12.6 x 33 mm For 20 tubes with a diameter of 13 mm, hole size (Ø x D): 13.5 x 47 mm For 12 tubes with a diameter of 16 mm, hole size (Ø x D): 16.5 x 47 mm For 8 tubes with a diameter of 19 mm, hole size (Ø x D): 19.5 x 47 mm For 20 x 2 ml tubes, hole size (Ø x D): 10.5 x 33 mm Block with removable channels for glass and disposable cuvettes For 20 x 1,5 ml tubes, hole size (Ø x D): 10.7 x 35 mm, 9 taper For 6 tubes with a diameter of 25 mm, hole size (Ø x D): 25.5 x 47 mm For 6 tubes with a diameter of 28 mm, hole size (Ø x D): 28.0 x 47 mm For 30 x 0.5 ml tubes, hole size (Ø): 7.8 mm, 9 taper For 4 tubes with a diameter of 30 mm, hole size (Ø x D): 30.1 x 47 mm For 4 tubes with a diameter of 33 mm, hole size (Ø x D): 33.2 x 47 mm For 48 x 0.2 ml tubes, hole size (Ø): 6.1 mm, 9 taper For 10 x 8 0.2 ml tube strips For one 96 well plate For one 384 well plate 3

Sample Concentrator SBH CONC/1 Fast and convenient way of concentrating multiple samples in a block heater at once Simple gas delivery system to pass gas over the sample surface via stainless steel needles. In combination with the heat from the block heater below this results in a fast, efficient evaporation. Adjustable stand for accurate height control Different gas delivery needles available Compatible only with Stuart block heaters SBH130D/3 and SBH200D/3 SBH CONC/1 with SBH200D/3 SBH CONC/1 Sample concentrator (without needles and block heater, have to be ordered separately) SBH130D/3 Block heater, see page 4 SBH200D/3 Block heater, see page 4 Gas delivery needles for SBH CONC/1 F7209 Needles, 76 mm (pack of 100) F7210 Needles, 127 mm (pack of 100) FSC4NCS Needles, PTFE coated, 76 mm (pack of 100) FSC4NCL Needles, PTFE coated, 127 mm (pack of 100) Vortex Mixers SA3 SA7 SA8 SA8/1 SA3 SA7 SA8 + SA8/1 Mini vortex, fixed speed: 2500 rpm, suited for use with tubes up to 16 mm diameter Vortex mixer, fixed speed: 2500 rpm, starts automatically when rubber cup is pressed and stops once vessel is removed Vortex mixer, variable speed: 200-2500 rpm, intermittent or continuous mode Accessory pack for SA8: plastic cradle for multi well plates (speed limit: 800 rpm), circular foam insert for beakers and flasks (up to 500 ml), rectangular foam insert (8 x 0.2 ml, 8 x 0.5 ml and 16 x 1.5 ml tubes), solid rectangular foam insert (blank for custom holes) Mini Centrifuges SCF1 SCF2 SCF2/2 SCF2/1/02 SCF2/1/05 SCF1 SCF2 Centrifuge with fixed speed: 6000 rpm, including 2 rotors (can be easily installed without tools): 1 rotor for 8 x 1.5 ml or 2.2 ml tubes and 1 rotor for 2 strips of 8 x 0.2 ml tubes, auto start/stop (close or open lid), can also be operated via mains on/off switch. Centrifuge with variable speed: 0 to 13500 rpm, including 1 rotor for 12 x 1.5 ml/2.2 ml tubes (optional rotor available, see below), timer and pulse start, for safety, the lid remains locked while motor is in motion. Accessories for SCF2 Strip tube rotor, 4 x 0.2 ml 8-tube strip 0.2 ml tube adapters 0.5 ml tube adapters 4

Hotplates Available with silicon metal alloy (robust for daily use) or ceramic platform-surface (better chemical resistance, higher temperatures) Analogue or digital control Microprocessor controlled temperature US150 UC150 CB500 SB500 US150 UC150 SD160 CB300 SB300 CB500 SB500 SD300 SD500 Hotplate with aluminium/silicon alloy top, analogue, LED display, max. temperature: 325 C, platform/heated area: 150 x 150 mm, flashing hot warning light, compatible with SCT1 temperature controller (see page 9), integral fitting for optional retort rod (SR1), shaped bottom to place optional retort base underneath the unit Hotplate with glass ceramic top, analogue, LED display, max. temperature: 450 C, platform: 150 x 150 mm, heated area: 120 x 120 mm, flashing hot warning light, compatible with SCT1 temperature controller (see page 9), integral fitting for optional retort rod (SR1), shaped bottom to place optional retort base underneath the unit Hotplate with robust aluminium top, digital, accurate temperature (± 0.2 C at 37 C), max. temperature: 325 C, platform/heated area: 160 x 160 mm, flashing hot warning light, integral fitting for optional retort rod (SR1) Hotplate with glass ceramic top, analogue, max. temperature: 450 C, platform: 300 x 300 mm, heated area: 200 x 200 mm, flashing hot warning light, integral fitting for optional retort rod (SR1) Hotplate with aluminium/silicon alloy top, analogue, max. temperature: 300 C, platform/heated area: 300 x 300 mm, flashing hot warning light, integral fitting for optional retort rod (SR1) Large hotplate with glass ceramic top, analogue, for up to 30 x 100 ml beakers, max. temperature: 375 C, platform: 300 x 500 mm, heated area: 250 x 450 mm, flashing hot warning light Hotplate with aluminium/silicon alloy top plate, analogue, for up to 30 x 100 ml beakers, max. temperature: 300 C, platform/heated area: 300 x 500 mm, flashing hot warning light Hotplate with metal top, digital, max. temperature: 300 C, platform/heated area: 300 x 300 mm, flashing hot warning light, integral fitting for optional retort rod (SR1) Hotplate with metal top, digital, max. temperature: 300 C, platform: 300 x 500 mm, heated area: 300 x 500 mm, flashing hot warning light, integral fitting for optional retort rod (SR1) Infrared Hotplate Hotplate, PTFE body with glass ceramic plate CR300 CP300 CR300 CP300 Infrared hotplate with ceramic top, saving energy and time, ideal for heating large volumes of liquid, platform: 300 x 300 mm, heated area: 140 mm diameter, flashing hot warning light PTFE construction with glass ceramic plate, analogue, max. temperature: 400 C, platform: 300 x 300 mm, heated area: 200 x 200 mm, flashing hot warning light, highly acid resistant, sealed construction, separate controller 5

Magnetic Stirrers with Hotplate UC152D UC152 CR302 SB162-3 US152 UC152 US152D UC152D CD162 SD162 SB162-3 CB302 SB302 CR302 Magnetic stirrer with aluminium/silicon alloy top hotplate, analogue, LED display, max. temperature: 325 C, platform/heated area: 150 x 150 mm, flashing hot warning light, stirrer speed: 100-2000 rpm, max. stirring capacity: 15 l, compatible with SCT1 temperature controller (see page 9), integral fitting for optional retort rod (SR1), shaped bottom to place optional retort base underneath the unit Magnetic stirrer with glass ceramic top hotplate, analogue, LED display, max. temperature: 450 C, platform: 150 x 150 mm, heated area: 120 x 120 mm, flashing hot warning light, stirrer speed: 100-2000 rpm, max. stirring capacity: 15 l, compatible with SCT1 temperature controller (see page 9), integral fitting for optional retort rod (SR1), shaped bottom to place optional retort base underneath the unit Magnetic stirrer with aluminium/silicon alloy top hotplate, digital, LED display, max. temperature: 325 C, platform/heated area: 150 x 150 mm, flashing hot warning light, stirrer speed: 100-2000 rpm, max. stirring capacity: 15 l, compatible with SCT1 temperature controller (see page 9), integral fitting for optional retort rod (SR1), shaped bottom to place optional retort base underneath the unit Magnetic stirrer with glass ceramic top hotplate, digital, LED display, max. temperature: 450 C, platform: 150 x 150 mm, heated area: 120 x 120 mm, flashing hot warning light, stirrer speed: 100-2000 rpm, max. stirring capacity: 15 l, compatible with SCT1 temperature controller (see page 9), integral fitting for optional retort rod (SR1), shaped bottom to place optional retort base underneath the unit Magnetic stirrer with glass ceramic top hotplate, digital, max. temperature: 450 C, platform: 160 x 160 mm, heated area: 120 x 120 mm, flashing hot warning light, stirrer speed: 200-1300 rpm, max. stirring capacity: 15 l, integral fitting for optional retort rod (SR1), supplied with PTFE coated probe and 2 x 25 mm PTFE coated stirrer bars Magnetic stirrer with aluminium/silicon alloy top hotplate, digital, max. temperature: 300 C, platform/heated area: 160 x 160 mm, flashing hot warning light, stirrer speed: 200-1300 rpm, max. stirring capacity: 15 l, integral fitting for optional retort rod (SR1), supplied with PTFE coated probe and 2 x 25 mm PTFE coated stirrer bars 3-Position magnetic stirrer with aluminium/silicon alloy top hotplate, analogue, space saving unit with 3 independently controlled stirring/heating positions, max. temperature: 325 C, each platform/heated area: 160 x 160 mm, separate Hot warning lights for each plate, stirrer speed: 100-1500 rpm, max. stirring capacity: 15 l, integral fitting for optional retort rod (SR1) for each position, supplied with 2 x 25 mm PTFE coated stirrer bars Magnetic Stirrer with large glass ceramic top hotplate, analogue, designed for big beakers, max. temperature: 450 C, platform: 300 x 300 mm, heated area: 200 x 200 mm, flashing hot warning light, stirrer speed: 100-1500 rpm, max. stirring capacity: 15 l, integral fitting for optional retort rod (SR1), supplied with 2 x 25 mm PTFE coated stirrer bars Magnetic stirrer with aluminium/silicon alloy top hotplate, analogue, designed for big beakers, max. temperature: 300 C, platform/heated area: 300 x 300 mm, flashing hot warning light, stirrer speed: 100-1500 rpm, max. stirring capacity: 15 l, integral fitting for optional retort rod (SR1), supplied with 2 x 25 mm PTFE coated stirrer bars Magnetic stirrer with ceramic top infrared hotplate, saves time and energy, fast heating of big volumes, platform: 300 x 300 mm, heated area: 140 mm diameter, flashing hot warning light, stirrer speed: 100-1500 rpm, max. stirring capacity: 15 l, integral fitting for optional retort rod (SR1), supplied with 2 x 25 mm PTFE coated stirrer bars Retort rods, probes, covers and further accessories see page 9. 6

Magnetic Stirrers without Hotplate Compact and large models available Available with silicon metal alloy (robust for daily use) or ceramic platform-surface (better chemical resistance, higher temperatures) SM5 US151 SM27 SB161-3 SM5 US151 UC151 SB161-3 SB301 SM4 Mini magnetic stirrer (w x d x h: 143 x 143 x 66 mm), analogue, polypropylene body with chemical resistant polycarbonate top, stirrer speed: 350-2000 rpm, max. stirring capacity: 1l, available in a choice of designs, further details on request Magnetic stirrer with stainless steel plate, platform: 150 x 150 mm, stirrer speed: 100-2000 rpm, max. stirring capacity: 15 l, integral fitting for optional retort rod (SR1), shaped bottom to place optional retort base underneath the unit Magnetic stirrer with glass ceramic platform, platform: 150 x 150 mm, stirrer speed: 100-2000 rpm, max. stirring capacity: 15 l, integral fitting for optional retort rod (SR1), shaped bottom to place optional retort base underneath the unit 3-Position magnetic stirrer with stainless steel platform, analogue, unit with 3 independently controlled stirring positions, platform: 550 x 210 mm, stirrer speed: 100-1500 rpm, max. stirring capacity: 3 x 2 l or 15 l in a flat bottomed 20 l beaker, integral fitting for optional retort rod (SR1) for each position, supplied with 3 x 25 mm PTFE coated stirrer bars Large and powerful magnetic stirrer for max. stirring capacity of 30 l, with stainless steel platform, robust construction, platform: 300 x 300 mm, stirrer speed: 100-600 rpm, electronic feedback speed control which accurately maintains the set speed, supplied with 1 x 100 mm PTFE coated stirrer bar, integral fitting for optional retort rod (SR1) Mini magnetic stirrer (w x d x h: 90 x 160 x 90 mm), compact and light weight, stirrer speed 80-1300 rpm, integral fitting for optional retort rod up to 16 mm diameter SM27 Portable magnetic stirrer, chemically resistant ABS case, powered by battery or mains power (mains and car battery adaptor has to be ordered separately, see below), tough, compact and light weight, variable speed up to 1300 rpm, ideal for use inside incubators, glove boxes or in the field, supplied with 4 alkaline batteries and 1 x 25 mm PTFE coated stirrer bar Accessories for SM27 SM27/2 Mains adapter for 230 V SM27/3 Mains adapter for car battery (12 V) Further hotplates and magnetic stirrers with or without hotplates on request. 7

Accessories for Hotplates and Magnetic Stirrers Heating Blocks for Round Bottom Flasks Compatible with hotplates US150 and UC150 (see page 5) and with the magnetic stirrers with hotplate US152, UC152, US152D and UC152D (see page 6) Designed to turn your hotplate into a heating mantle Range of sizes available up to 500 ml Flexible modular system, suitable for many applications Good chemical resistance SHB100KIT9 SHB100KIT3 SHB250KIT6 SHB250KIT3 Heating blocks kit, including flat base plate SHB100BASE and inserts for 3 x 25 ml, 3 x 50 ml and 3 x 100 ml round bottom flasks Heating blocks kit, including flat base plate SHB100BASE and inserts for 1 x 25 ml, 1 x 50 ml, and 1 x 100 ml round bottom flasks Heating blocks kit, including flat base plate SHB250BASE and inserts for 3 x 100 ml and 3 x 250 ml round bottom flasks Heating blocks kit, including flat base plate SHB250BASE and inserts for 3 x 250 ml round bottom flasks SHB100BASE Heating blocks flat base for inserts for up to 100 ml round bottom flasks SHB250BASE Heating blocks flat base for inserts for up to 250 ml round bottom flasks SHB5ML 3 Inserts for SHB100BASE and SHB250BASE, for 5 ml round bottom flasks SHB10ML 3 Inserts for SHB100BASE and SHB250BASE, for 10 ml round bottom flasks SHB25ML 3 Inserts for SHB100BASE and SHB250BASE, for 25 ml round bottom flasks SHB50ML 3 Inserts for SHB100BASE and SHB250BASE, for 50 ml round bottom flasks SHB100ML 3 Inserts for SHB100BASE and SHB250BASE, for 100 ml round bottom flasks SHB250ML 3 Inserts for SHB100BASE and SHB250BASE, for 250 ml round bottom flasks SHB100CLAMP 3-Position clamp for use with SHB100BASE SHB250CLAMP 3-Position clamp for use with SHB250BASE SHB1000KIT SHB1000BASE SHB50C SHB100C SHB250C SHB500C Large heating blocks kit, including flat base plate SHB1000BASE and inserts for 1 x 50 ml, 1 x 100 ml, 1 x 250 ml, and 1 x 500 ml round bottom flasks Heating blocks flat base for a single insert, for up to 500 ml round bottom flasks, with heat resistant handle 1 Insert for SHB1000BASE, for 50 ml round bottom flasks 1 Insert for SHB1000BASE, for 100 ml round bottom flasks 1 Insert for SHB1000BASE, for 250 ml round bottom flasks 1 Insert for SHB1000BASE, for 500 ml round bottom flasks Wide range of round bottom flasks in our portfolio. Further information on request. 8

Accessories for Hotplates and Magnetic Stirrers SCT1 Temperature Controller For the accurate temperature control of aqueous or oil based samples up to a maximum of 200 C. Usable with US150, UC150, US152, UC152, US152D and UC152D. The SCT1 is automatically recognized by these units as soon as the SCT1 is connected. Bright, easy to read LED display. The SCT1 features an in-built clamp allowing the controller to be mounted either on a horizontal or vertical retort rod. SCT1 SCT1 with US152 SCT1 SCT1/1 SCT1/2 SCT1/1/MP Temperature controller for US150, UC150, US152, UC152, US152D, and UC152D, supplied as standard with stainless steel probe, type of sensor PT100, temperature range: 20 C - 200 C, accuracy: ± 0,5 C, resolution: 1 C Probe holder PTFE probe Stainless steel probe Retort rods and temperature probes SR1 SR2 SR3 SRC Retort rod, 600 mm length x 12 mm diameter Retort rod, 300 mm length x 12 mm diameter Retort rod bracket Retort rod, 600 mm length, with bracket CD162/1 Stainless steel probe for CD162 and SD162 (see page 6) CD162/2 PTFE probe for CD162 and SD162 (see page 6) Protective covers, heating blocks and baths for hotplates and magnetic stirrers with hotplate SB16/3 Protective cover for magnetic stirrer with hotplate SD162 (see page 6) SB16/4 Protective cover for SD160 (see page 5) SB16/6 SB16/7 Heating block for 25 ml, 50 ml, 100 ml, and 250 ml round bottom flasks Sand bath for aluminium top hotplates, for tubes and small flasks 9

Water Baths Temperature range: Ambient + 5 C - 99,9 C Temperature stability: ± 0.5 C Digital display and selection of temperature Integral drain Heater mounted underneath the tank to allow easy cleaning Low level water sensor Supplied with robust polycarbonate lid SWB6D SWB15D SWB24D Water Bath, digital, 6 Liters, internal dimensions (w x d x h): 300 x 150 x 200 mm Water Bath, digital, 15 Liters, internal dimensions (w x d x h): 300 x 325 x 200 mm Water Bath, digital, 24 Liters, internal dimensions (w x d x h): 300 x 500 x 200 mm SWB6D Shaking Water Bath and Accessories Digital display and selection of temperature Choice of linear or orbital shaking action (depending on used platform) Temperature range: Ambient + 5 C - 100 C / ± 0,25 C Capacity: 24 Liters Shaking speed: 20-200 rpm Shaking orbit/amplitude: 20 mm Low-level water sensor Integral drain Heater mounted underneath the tank to allow easy cleaning Internal dimensions (w x d x h): 300 x 500 x 200 mm SBS40 SBS40 SBS40/1 SBS40/2 SBS40/3 SBS40/4 SWB3/1 SBS40/5 SBS40/6 SBS40/7 SBS40/8 SBS40/9 SBS40/10 Digital shaking water bath without platform (platform has to be ordered separately) Platforms for SBS40 Platfrom, linear shaking action Platform, orbital shaking action Platform, perforated, only required to use SBS40 as static bath Covers for SBS40 Polycarbonat cover, hinged Stainless steel cover Test tube racks for SBS40 (2 racks can be used on a platform) Test tube rack, for 143 x 1.5 ml micro tubes Test tube rack, for 120 x 13 mm culture tubes Test tube rack, for 72 x 16 mm culture tubes Test tube rack, for 56 x 15 ml centrifuge tubes Test tube rack, for 30 x 26 mm culture tubes Test tube rack, for 25 x 50 ml centrifuge tubes SBS40/1 SBS40/2 SBS40 Accessory tube racks Further water baths in our product range. 10

Incubator for Multi-well Plates and Petri Dishes Compact unit with stainless steel interior Dimensions overall/internal (w x d x h): 380/250 x 380/230 x 435/200 mm Laminar flow air circulation, water tray to increase humidity Water tray that avoids drying out of samples Temperature range: Ambient + 8 C - 80 C, ± 0.5 C (at 37 C) Nominal capacity: 20 Liters, for 24 plates (or 48 plates if stacked in 2 layers) Digital setting and display of temperature (display resolution 0.1 C) Over temperature protection Upward opening door SI19 SI19 Incubator for multi-well plates and petri dishes, supplied with 4 shelves and water tray Hybridisation Incubator (with combined rocker shaker) Temperature range: Ambient + 8 C - 80 C, ± 0.1 C (at 37 C) Stainless steel interior, nominal capacity: 20 Liters Digital setting and display of temperature (resolution: 0.1 C), analogue setting of speed Over temperature protection Supplied with rotisserie for 7 x 40 mm diameter hybridisation bottles, further rotisserie for 2 x 75 mm diameter hybridisation bottles available Easy conversion to rocker shaker: remove rotisserie, pull forward rear platform Rotational speed range: 2-10 rpm, rocker speed range: 5-70 oscillations/minute Upward opening door Dimensions overall/internal (w x d x h): 380/286 x 380/230 x 435/200 mm SI30H SI30H SI20H/1 SI20H/2 SI20H/3 SI20H/4 SI20H/5 Hybridisation incubator, supplied with rocker and rotisserie SI20H/1 (see below) Rotisserie for 7 x 40 mm diameter hybridisation bottles (without bottles!) Rotisserie for 2 x 75 mm diameter hybridisation bottles (without bottles!) Hybridisation bottles made from Pyrex borosilicate glass, polyester caps, PTFE seals Hybridisation bottle, length 260 mm, outer/inner diameter 40 mm / 33.6 mm Hybridisation bottle, length 260 mm, outer/inner diameter 75 mm / 68.6 mm Hybridisation bottle, length 170 mm, outer/inner diameter 40 mm / 33.6 mm Incubators for Total Visibility Constructed from clear Acrylic polymer, analogue or digital model Incubators without base (optional available), to place units easily over complete instruments Forced air circulation and electronic temperature control ensure accurately maintained conditions Temperature range: Ambient + 5 C - 60 C, ± 0,1 C (at 37 C) Nominal volume: 60 liters Temperature safety cut-out set at 72 C Upward opening door, can be opened completely or only the front Dimensions overall/internal (w x d x h): 600/450 x 390/380 x 390/380 mm SI60D with SI60/2 SI60 SI60D SI60/1 SI60/2 SI60/5 Visibilty Incubator with analogue control Visibility Incubator with digital control and LCD display Acrylic base plate Plastic coated shelf/rack system with 2 shelves Water tray for SI60 and SI60D 11

Incubators with Shakers SI500 SI600 SI505 SI500 SI600 Incubator with orbital shaker, supplied with retractable platform (with securing bars) for easy loading and unloading, for 12 x 250 ml, 9 x 500 ml, or 6 x 1000 ml flasks, temperature range: ambient + 5 C - 60 C (± 0.5 C), speed range: 30-300 rpm, orbit diameter: 16 mm, digital display for temperature and speed (temperature display resolution: 0.1 C), integrated timer with alarm (1 second to 9 days), platform size: 335 x 335 mm, max. load: 10 kg, USB connection, dimensions overall/internal (w x d x h): 450/422 x 474/408 x 522/297 mm Incubator also available with IQ/OQ documentation, price on request. Incubator with orbital shaker, supplied with retractable platform (with securing bars) for easy loading and unloading, for 15 x 500 ml, 9 x 1000 ml, or 2 x 2000 ml flasks, temperature range: ambient + 5 C - 60 C (± 0.5 C), speed range: 30-300 rpm, orbit diameter: 16 mm, digital display for temperature and speed (temperature display resolution: 0.1 C), integrated timer with alarm (1 second to 9 days), platform size: 526 x 390 mm, max. load: 10 kg, USB connection, dimensions overall/internal (w x d x h): 675/623 x 542/465 x 642/395 mm Incubator also available with IQ/OQ documentation, price on request. Stainless steel tube racks with Magnalock coupling system for SI500 and SI600 SI500/1 Tube rack for 64 x 1.5 ml micro tubes, adjustable angle: up to 30 SI500/2 Tube rack for 25 x 15 ml centrifuge tubes, adjustable angle: up to 30 SI500/3 Tube rack for 12 x 50 ml centrifuge tubes, adjustable angle: up to 30 SI500/4 Tube rack for 16 x 30 ml universal plastic containers, adjustable angle: up to 30 SI505 Incubator shaker with high speed shaking action 250 1250 rpm ideal for multi-well plates and micro tubes, supplied with retractable stainless steel platform (220 x 220 mm) for easy loading and unloading, for 4 multi-well plates or 2 tube racks (see below), temperature range: ambient + 7 C - 60 C (± 0.5 C at 37 C), orbit diameter: 1.5 mm, digital display for temperature and speed (temperature display resolution: 0.1 C), integrated timer with alarm (1 second to 9 days), max. load: 1.5 kg, USB connection, stainless steel water trays to reduce evaporation, dimensions overall/internal (w x d x h): 361/307 x 405/300 x 430/190 mm Tube racks for SI505 SSM5/1 SSM5/2 SSM5/3 Tube rack for 50 x 1.5 ml tubes Tube rack for 50 x 0.5 ml tubes Tube rack for 50 x 0.2 ml tubes 12

Cooled Incubator with Shaker Compact unit with acrylic windows in the door and on both sides In combination with the SRC4 recirculating cooler (optional available, see page 21) or an equivalent recirculating cooler, the incubator can operate at temperatures down to 15 C below ambient (min. 5 C) Temperature range (when used with recirculating cooler, page 21): Ambient - 15 C to 60 C, ± 0,5 C Speed range: 30-300 rpm (orbital motion) Retractable platform with securing bars (520 x 390 mm) for easy loading and unloading Platform suitable for 6 x 2000 ml, 9 x 1000 ml or 15 x 500 ml flasks, max. load 10 kg, max. flask height: 320 mm Optional available stainless steel racks with Magnalock coupling system for use with 1.5 ml, 15 ml, and 50 ml tubes Integrated timer with alarm (1 second - 9 days) Digital display for temperature and speed USB connection with dedicated software for temperature monitoring Dimensions overall/internal (w x d x h): 675/625 x 562/455 x 640/380 mm SI600C Cooled incubator with orbital shaker SRC4 Recirculating cooler, bath capacity 3 liters, pump rate 9 liters/minute (see also page 21) SI500/1 Tube rack for 64 x 1.5 ml micro tubes, adjustable angle: up to 30 SI500/2 Tube rack for 25 x 15 ml centrifuge tubes, adjustable angle: up to 30 SI500/3 Tube rack for 12 x 50 ml centrifuge tubes, adjustable angle: up to 30 SI500/4 Tube rack for 16 x 30 ml universal plastic containers, adjustable angle: up to 30 Further incubators in our product range. Information on request. Colony Counter Pressure sensitive counting, confirmation by audible tone (can be turned on/off) Digital display (3 digit LED for up to 999 counts) Bright white energy saving LED lighting Choice of light or dark background Supplied with two Wolffhuegel graticules and dish centering adapters to facilitate use with 50 mm to 90 mm dishes Averaging facility calculates average count over multiple plates Connectivity to printer or computer, USB cable supplied Optional magnifiers 1.7 x or 3 x (hast o be ordered separately) Dimensions (w x d x h): 310 x 300 x 140 mm Also available with IQ/OQ documentation, price on request SC6PLUS with SC6/1 SC6PLUS Pressure sensitive digital colony counter, for simple and accurate counting SC6/1 1.7 x magnifier SC6/1/3 3.0 x magnifier SC6/2 Wolffhuegel graticule and segmentation discs (pack of 10) SC6/3 Dish centering adapters (pack of 2) SC6/4 Clear protective discs (pack of 5) Wide range of petri dishes also available from us. Separate price lists on request. 13

Overhead Stirrers SS10 SS10/1 & SS10/2 SS10/11 SS10/14 SS10/10 SS10/12 SS10/13 SS10 SS20 SS30 SS10/1 SS10/2 SS10/5 SS10/6 SS10/10 SS10/11 SS10/12 SS10/13 SS10/14 Overhead stirrer, general purpose, for 15 l aqueous to low viscosity liquids, 100-2000 rpm Overhead stirrer, high performance, for 25 l low to medium viscosity liquids, 100-2000 rpm Overhead stirrer, dual torque, for 40 l medium to high viscosity liquids, 50-500 rpm (mode 1, high torgue), 100-2000 rpm (mode 2, low torque) Stand, general purpose Stand, heavy duty Paddle rod, 350 mm Paddle rod, 550 mm Small paddle head, width: 60 mm Large paddle head, width: 94 mm Large propeller head, (2 blade), width: 80 mm Small propeller head (4 blade), width: 50 mm Anchor paddle head, width: 60 mm Rockers All units can be used in incubators with max. temperature of 40 C and max. humidity of 80 %. SSM3 with SSM3/1 SSM4 SSL3 SSL4 SSM3 Mini-Rocker, 3D gyratory motion, speed range: 5-70 rpm, angle of tilt: 3-12, platform with non-slip mat: 235 x 235mm, max. load: 3 kg, optional accessory tier system available (see below), dimensions (w x d x h): 240 x 300 x 165 mm SSM4 Mini-Rocker, see-saw wave motion, speed range: 5-70 rpm, angle of tilt: 7, platform with non-slip mat: 235 x 235mm, max. load: 3 kg, optional accessory tier system available (see below), dimensions (w x d x h): 240 x 300 x 150 mm SSL3 Rocker, 3D gyratory motion, speed range: 5-70 rpm, angle of tilt: 3-12, platform with non-slip mat: 355 x 355mm, max. load: 10 kg, optional accessory tier system available (see below), dimensions (w x d x h): 360 x 420 x 170 mm SSL4 Rocker, see-saw wave motion, speed range: 5-70 rpm, angle of tilt: 7, platform with non-slip mat: 335 x 335 mm, max. load: 10 kg, optional accessory tier system available (see below), dimensions (w x d x h): 360 x 420 x 160 mm SSM3/1 SSL3/1 Tier system for rockers Tier system, 2 platforms plus 8 bars, for SSM3 and SSM4 Tier system, 2 platforms plus 8 bars, for SSL3 and SSL4 14

Shakers All units can be used in incubators with max. temperature of 40 C and max. humidity of 80 %. SSM1 SSM5 SSL5 SSL1 SSL2 SSM1 SSM1/1 SSM1/2 SSM1/3 Orbital shaker, smooth shaking action ideal for samples of 0.5-5 ml in multi-well plates, dishes, and petri dishes, speed range: 30-300 rpm, orbit diameter: 16 mm, platform with non-slip mat: 220 x 220 mm, max. load: 3 kg, digital timer (1 second - 9 hours, or continuous operation), with optional available platform SSM1/1 (see below) also usable with flasks, dimensions (w x d x h): 240 x 300 x 140 mm Optional accessories for SSM1 Accessory cradle with 4 securing bars, for 4 x 250 ml, or 2 x 500 ml, or 1 x 1000 ml flasks Large platform, holds up to 8 plates, 345 x 259 mm Clear acrylic lid SSM5 SSL5 SSM5/1 SSM5/2 SSM5/3 Orbital shaker for up to 4 multi-well plates, speed range: 250-1250 rpm, orbit diameter: 1.5 mm, platform with non-slip mat: 220 x 220 mm, max. load: 1 kg, digital timer (1 second - 9 hours, or continuous operation), with optional available tube holders (see below) usable with 0.2-1.5 ml tubes, dimensions (w x d x h): 240 x 300 x 160 mm Orbital shaker for up to 8 multi-well plates, speed range: 250-1250 rpm, orbit diameter: 1.5 mm, platform with non-slip mat: 306 x 306 mm, max. load: 2 kg, digital timer (1 second - 9 hours, or continuous operation), with optional available tube holders (see below) usable with 0.2-1.5 ml tubes, dimensions (w x d x h): 360 x 420 x 160 mm Optional accessories for SSM5 and SSL5 Tube holder for 50 x 1.5 ml tubes Tube holder for 50 x 0.5 ml tubes Tube holder for 50 x 0.2 ml tubes SSL1 SSL1/1 SSL1/2 Orbital shaker for bottles, flasks, and similar types of vessels, speed range: 30-300 rpm, orbit diameter: 16 mm, supplied with cradle type platform (335 x 335 mm) with 4 securing bars, suitable for 12 x 250 ml, or 9 x 500 ml, or 6 x 1000 ml, or 2 x 2000 ml flasks, max. load: 10 kg, digital timer (1 second - 9 hours, or continuous operation), platform capacity can be increased by using optional available platform SSl1/1 (see below), dimensions (w x d x h): 360 x 420 x 270 mm Optional accessories for SSl1 Large platform (510 x 510 mm) with 6 securing bars, suitable for 30 x 250 ml, or 16 x 500 ml, or 9 x 1000 ml, or 4 x 2000 ml flasks Note: the use of this platform reduces the speed of SSl1 to a max. of 150 rpm Flat platform with non-slip mat, without cradle, 350 x 350 mm SSL2 Reciprocating shaker for bottles, flasks, and similar types of vessels, construction and control identical to SSL1 (see above), speed range: 25-250 rpm, orbit diameter: 20 mm, max. load: 10 kg, digital timer (1 second - 9 hours, or continuous operation), dimensions (w x d x h): 360 x 420 x 270 mm 15

Flask Shaker Ideal for extractions For up to 8 x 500 ml flasks Vigorous shaking action: 8-800 oscillations/minute Maximum load: 3 kg Electronic feedback control for constant speed irrespective of load Timer (10-60 minutes) or continuous operation 4 rubber feet to absorb vibration SF1 SF1/1 SF1/2 Flask shaker, supplied with 2 side-arms, eight clamps, and Allen key Spare clamp Optional: 2 accessory side-arms and 4 clamps, allows shaker to hold up to 12 vessels Rotator Drive Unit with Drums STR4 STR4 with STR4/1 STR4 with STR4/2 STR4 with STR4/3 STR4 with STR4/4 STR4 with STR4/5 STR4 Rotator drive unit, highly versatile, accepts a choice of 5 drums (not included, have to be ordered separately, see below), rotation speed 6-60 rpm, max. load: 3kg, built-in timer: 10 60 minutes, or continuous operation STR4/1 Drum to hold test tube clip plates, end-over-end rotation of tubes, can hold up to 4 plates fitted with tube clips (not included have to be ordered separately, see below) STR1/1 2 clip plates for 12 x 12 mm tubes STR1/2 2 clip plates for 10 x 16 mm tubes STR1/3 2 clip plates for 8 x 19 mm tubes STR1/4 2 clip plates for 7 x 24 mm STR4/2 STR4/3 STR4/4 STR4/5 SW2/1 Drum with 2 platforms to hold bottles or flasks, end-over-end mixing of 2 bottles up to 250 ml Drum with figure 8 mixing action, for one vessel up to 200 mm in length and 120 mm diameter, vessel is held at a 45 angle so it is rolled and turned end-over-end at the same time giving a vigorous figure 8 of mixing action Drum with 4 segment cradles holding up to 4 bottles or containers up to 300 mm in length and 120 mm diameter, drum holds vessel in horizontal position Drum for 1.5 ml tubes, with 4 segment cradles and 4 tube racks (each for 60 x 1.5 ml tubes, end-over-end movement Spare rack for 60 x 1.5 ml tubes, for STR4/5 16

Rotators Can be used in incubators up to 60 C and in cool rooms down to 4 C. SB2 with SB3/2 Tube holders SB2 SB3 SB3/1 SB3/2 SB3/3 SB3/4 SB3/5 SB3/6 SB3/DUAL SB3/1/PC Rotator for tubes (1.5-50 ml), fixed speed: 20 rpm, fully adjustable mixing angle, tube holders not included, have to be ordered separately (see below) Rotator for tubes (1.5-50 ml), digital speed control, variable speed: 2-40 rpm, fully adjustable mixing angle, digital timer, tube holders not included, have to be ordered separately (see below) Tube holders for SB2 and SB3 Tube holder, end-over-end action, for 40 micro tubes with Ø = 10-11.5 mm Tube holder, end-over-end action, for 20 test/blood tubes with Ø = 9-20 mm Tube holder, end-over-end action, for 12 x 50 ml centrifuge tubes with Ø = 25-35 mm Tube holder, rolling action, for 63 culture tubes with Ø =12 mm Tube holder, rolling action, for 36 culture tubes with Ø = 16 mm Tube holder, rolling action, for 30 culture tubes with Ø = 26 mm Multiple tube holder accessory Spare clips for SB3/1 holder (20 clips) Roller Mixers For a gentle, but highly efficient, rocking and rolling action. With removable rolls to adjust the unit also for bigger vessels and removable side panels that ensure the sample bottles do not slide off the roller mixers during operation. All models can be used in incubators up to 60 C and humidity up to 80 % or in cooling rooms down to 4 C SRT6D with removable side panels and detachable roller tubes SRT9D SRT6D & SRT9 stacked with SRT/STACK SRT6 SRT6D SRT9 SRT9D SRT/STACK Roller mixer, 6 rollers, analogue control, fixed speed: 33 rpm, max. load: 5 kg, without timer, usable for continuous operation, dimensions (w x d x h): 565 x 240 x 110 mm Roller mixer, 6 rollers, digital control, variable speed: 5-60 rpm, max. load: 5 kg, with timer, usable for continuous operation, dimensions (w x d x h): 565 x 240 x 110 mm Roller mixer, 9 rollers, analogue control, fixed speed: 33 rpm, max. load: 5 kg, without timer, usable for continuous operation, dimensions (w x d x h): 565 x 360 x 110 mm Roller mixer, 6 rollers, digital control, variable speed: 5-60 rpm, max. load: 5 kg, with timer, usable for continuous operation, dimensions (w x d x h): 565 x 360 x 110 mm Stacking system for roller mixers, works by magnets no need for any tools, comprises 4 magnetised stacking blocks, up to 3 roller mixers can be stacked Note: In order to stack 3 roller mixers, 2 x SRT/STACK are required Analogue and digital roll only versions available on request. (SRT6ROLL, SRT6DROLL, SRT9ROLL, and SRT9DROLL) 17

Water Stills Aquatron Fully automatic operation Safety features allow unattended operation High quality borosilicate glassware coupled with silica sheathed heaters gives pyrogen-free distillate of the highest purity Low temperature distillate 3 versions available: for 4 l or 8 l single distilled water per hour, or for 4 l double distilled water per hour Operates from any raw water supply Reservoir level control Simple conversion to pre-treated feed (see WCK/N) Supplied with wall mounting bracket Simple to clean ph: 5.0 6.5 A4000/220 A4000 A8000 A4000D Aquatron, 4 l single distilled water/hour, w x d x h: 550 x 240 x 410 mm Aquatron, 8 l single distilled water/hour, w x d x h: 550 x 240 x 410 mm Aquatron, 4 l double distilled water/hour, w x d x h: 550 x 410 x 410 mm Accessories for Aquatron ADH with ADI AFH with AFI Aquatron connected with AFH and ADH Deioniser (consists of ADH and ADI) Simple, portable deionizer giving good quality water, max. flow rate up to 60 l/hour, free standing or wall mounted, colour change indicates resin condition at a glance, ideal as pre-treatment for Aquatron water stills ADH Deioniser housing ADI Ion exchange cartridges (pack of 3) WCK/N Conversion kit for pre-treated feed Filter (consists of AFH and AFI) Simple but effective filter unit ideal for removing particulate matter from water supply to protect sensitive equipment from damage, max. flow rate up to 25 l/hour, pore size: 25 µm AFH Filter housing AFI Filter elements (pack of 3) AFD ALC Wall mounting bracket Coupling to connect filter unit and deioniser unit 18

Water Stills D4000/EURO W4000/EURO D4000 W4000 Distinction Water Still, 220V, 4 l single distilled water/hour, all glass construction silica sheated heaters, 2 independent safety thermostats prevent overheating, control device turns off heater when collecting reservoir is full, wall mountable, produces pyrogen-free water, ph 5.0-6.5, w x d x h: 540 x 160 x 410 mm Merit Water Still, 220V, 4 l single distilled water/hour, glass construction with long life metal heater, 2 independent safety thermostats prevent overheating, wall mountable, produces pyrogen-free water, ph 5.0-6.5, w x d x h: 500 x 150 x 450 mm Accessories for Aquatron, Distinction, and Merit WR20 WS20 Pyrex glass reservoir bottle (20 l) supplied complete with PTFE stopcock, bottle closure fitted with connections for distillate inlet pipe, reservoir level control and a 0.2 µm filter on the air inlet. Autoclavable at 121 C Stand for WR20, height: 43 cm Homogenisers and Accessories SHM1 SHM2 Accessories SHM1/EURO SHM2/EURO SHM/5 SHM/7 SHM/10 SHM/20 SHM/DISP SHM/ADAPT SHM/STAND Handheld homogeniser, variable motor speed: 5,000-35,000 rpm, for 0.03 ml -100 ml, can be used with polycarbonate disposable probes or stainless steel probes, net weight: 0.5 kg, dimensions (h x Ø): 160 x 55 mm Laboratory homogeniser, variable motor speed: 5,000-28,0000 rpm, for 0.03 ml - 2000 ml, weight 1.6 kg, dimensions (h x Ø = 220 x 70 mm Homogeniser probe, stainless steel, l x Ø: 75 x 5 mm, flat head, for 0.03-5 ml Homogeniser probe, stainless steel, l x Ø: 115 x 7 mm, saw tooth, for 0,25-30 ml Homogeniser probe, stainless steel, l x Ø: 115 x 10 mm, saw tooth, for 1.5-100 ml Homogeniser probe, stainless steel, l x Ø: 195 x 20 mm, saw tooth, for 50-2000 ml Disposable probes (pack of 25), plastic, l x Ø: 110 x 7 mm, saw tooth, for 0.25-30 ml Adapter for disposable probes Stand compatible with SHM1/EURO and SHM2/EURO, heavy duty, base (w x d xh): 220 x 304 x 11 mm, rod (h x Ø: 610 x 16 mm, net weight: 3.6 kg 19

Melting Point Apparatus and Accessories SMP10 SMP11 SMP20 SMP30 SMP40 SMP40 (split design) SMP10 SMP11 SMP20 SMP30 SMP40 Melting point apparatus, digital selection and display of temperature, temperature range: ambient to 300 C, display resolution 1 C, up to 2 samples can be tested simultaneously, unit heats at a fixed rate of 2 C/minute, supplied with 1 x melting point tubes SMP10/1 (see below) Melting point apparatus, analogue, temperature range: 50 C - 300 C, up to 3 samples can be tested simultaneously, manually adjustable heating rate: 1 C to 10 C per minute, supplied with 1 x melting point tubes SMP1/4 (see below) and thermometer Melting point apparatus, digital selection and display of temperature, temperature range: ambient to 300 C, display resolution 0.1 C, up to 2 samples can be tested simultaneously, adjustable heating rate: 1 C to 10 C per minute, supplied with 1 x melting point tubes SMP10/1 (see below) Melting point apparatus, large alphanumeric LCD display, two stage head adjustment for comfortable viewing angle, head up display shows temperature, temperature range: ambient to 400 C, display resolution 0.1 C, up to 3 samples can be tested simultaneously, adjustable heating rate: 0.5 C to 10 C per minute in 0.1 C increments, records up to 8 events in memory for each of the 3 sample tubes, supplied with 1 x melting point tubes SMP10/1 (see below) Automatic melting point apparatus, 5.7 colour VGA touch screen display, unique split design concept, temperature range: ambient to 400 C, display resolution 0.1 C, up to 3 samples can be tested simultaneously, adjustable heating rate: 0.1 C to 20 C per minute in 0.1 C increments, memory: up to 200 results with video, USB port, supplied with 1 x melting point tubes SMP2/1 (see below) SMP40 also available with IQ/OQ documentation price on request. Accessories for melting point apparatus SMP11/1 Spare thermometer for SMP11, spirit filled, 0 C - 250 C SMP1/2 Cooling plug (brass) for rapidly reducing heating block temperature after use SMP10/1 Melting point tubes, sealed at one end (pack of 100) SMP1/4 Melting point tubes, open both ends (pack of 100) SMP2/1 Melting point tubes, sealed both ends (pack of 100) 20

Heating Mantles Controlled up to 450 C For round bottom flasks from 50 ml to 2000 ml Robust lightweight, easy to clean aluminium casing Integrated clamp fitting Emergency switch off which will automatically trigger in the event of a spillage HM50C HM100C HM250C HM500C HM1000C HM2000C Heating mantle for 50 ml round bottom flasks Heating mantle for 100 ml round bottom flasks Heating mantle for 250 ml round bottom flasks Heating mantle for 500 ml round bottom flasks Heating mantle for 1000 ml round bottom flasks Heating mantle for 2000 ml round bottom flasks Flocculators and Accessories For flocculation test on water and effluent samples Digital displays for speed and, for SW6 only, time Two pre-set programs allow routine speed and time parameters input and executing by simply pressing one button Speed range: 25-250 rpm Built-in illumination for easy viewing of samples Without beakers (available on request) SW5 SW6 SW5 SW6 SW6/2 Flocculator for 2 samples, speed range: 25-250 rpm, portable, LCD display, dimensions (w x d x h): 320 x 210 x 500 mm Flocculator for 6 samples, speed range: 25-250 rpm, timer: 0-99 minutes, LED display, dimensions (w x d x h): 750 x 210 x 460 mm Simultaneous coagulant doser (SW6 only) Recirculating Coolers Powerful cooling for external device e.g. electron microscopes LED display Temperature range: -20 C to 30 C (± 2 C) Quiet operation Safety alarm to indicate an overload relay for the refrigeration unit Dedicated drain for easy emptying and cleaning Incorporated dust filter, can easily be accessed by removable front panel SRC4 SRC14 SRC4 SRC14 Recirculating cooler, bath capacity: 3 l, pump rate: 9 l/minute Recirculating cooler, bath capacity: 14 l, pump rate: 18 l/minute 21

Rotary Evaporators and Accessories Speed range: 20-190 rpm Simple, counterbalanced lift mechanism, lift distance 150 mm PTFE/glass liquid pathway for chemical inertness Long life graphite impregnated PTFE vacuum seal Efficient flask and vapour tube ejection system Optional digital baths (3 l or 6.2 l) for rotary evaporators available (see below) RE300 with RE300DB RE300 RE301 RE302 RE300P RE301P RE302P RE300DB RE300OB RE3022C RE200/SA RE100/EA FD50/4RE/1 FD100/4RE/1 FD250/4RE/1 FD500/4RE/1 FD500/4REP FD1L/4RE/1 FD1L/4REP FD2L/4RE/1 FD2L/4REP RE100/RF/50 RE100/RF/100 RE100/RF/250 RE100/RF/500 RE100/RF/500P RE100/RF/1L RE100/RF/1LP RE100/CO RE100/COP RE200/VC RE200/VCP RE200/CF RE200/CFP RE200/CFD RE100/VR RE100/VT RE100/VT/CF RE100/VS JC35/1 Rotary evaporator with diagonal coil condenser, vapour tube for diagonal condenser, receiving flask 1 l, Florentine flask 1 l, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip Rotary evaporator with vertical coil condenser, vapour tube for vertical condenser, receiving flask 1 l, Florentine flask 1 l, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip Rotary evaporator with cold finger condenser, drain for cold finger condenser, vapour tube for cold finger condenser, receiving flask 1 l, Florentine flask 1 l, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip Rotary evaporator with diagonal coil condenser plastic coated, vapour tube for diagonal condenser, receiving flask 1 l plastic coated, Florentine flask 1 l plastic coated, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip Rotary evaporator with vertical coil condenser plastic coated, vapour tube for vertical condenser, receiving flask 1 l plastic coated, Florentine flask 1 l plastic coated, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip Rotary evaporator with cold finger condenser plastic coated, drain for cold finger condenser, vapour tube for cold finger condenser, receiving flask 1 l plastic coated, Florentine flask 1l plastic coated, feed tube with stopcock, vacuum seal, conical joint clip, spherical joint clip Digital water bath, temperature: ambient to 95 C, capacity: 3 l Digital high temperature oil bath, temperature: ambient to 180 C, capacity: 6,2 l Vacuum pump, ultimate pressure: 12 mbar, flow rate: 21 l/minute Anti-splash protector Extension adapter (for 50 ml or 100 ml flasks) Evaporating flasks, 2 x 50 ml Evaporating flask, 1 x 100 ml Evaporating flask, 1 x 250 ml Evaporating flask, 1 x 500 ml Evaporating flask, 1 x 500 ml, plastic coated Evaporating flask, 1 x 1000 ml Evaporating flask, 1 x 1000 ml, plastic coated Evaporating flask, 1 x 2000 ml Evaporating flask, 1 x 2000 ml, plastic coated Receiving flasks, 2 x 50 ml Receiving flasks, 2 x 100 ml Receiving flasks, 2 x 250 ml Receiving flask, 1 x 500 ml Receiving flask, 1 x 500 ml, plastic coated Receiving flask, 1 x 1000 ml Receiving flask, 1 x 1000 ml, plastic coated Diagonal condenser Diagonal condensor, plastic coated Vertical condenser Vertical condenser, plastic coated Cold finger condenser Cold finger condenser, plastic coated Drain for cold finger condenser Feed tube / vacuum release Vapour tube for diagonal condensers Vapour tube for vertical coil and cold finger condensers Vacuum seal Spherical joint clip for receiving flask (2 per pack) Recirculating coolers see page 21. 22

Bottle Top Dispensers and Digital Burettes BibbyPet Pressmatic PP Pressmatic R Pressmatic HF Digital Burette BD10 BD25 PD10P PD60P BibbyPet, bottle top dispensers, for non-aggressive liquids, simple to operate, easy cleaning and maintenance BibbyPet, bottel top dispenser, 1-10 ml BibbyPet, bottle top dispenser, 2.5-25 ml Pressmatic PP, bottle top dispensers, simple click stop ring for fast and accurate volume setting, fully autoclavable, clear viewing window, fits directly onto a 32 mm bottle, supplied with 3 bottle adapters (28 mm, 40 mm, 45 mm) Pressmatic PP, bottle top dispenser, 2-10 ml Pressmatic PP, bottle top dispenser, 10-60 ml PD1R PD2R PD5R PD10R PD30R PD60R Pressmatic R, bottle top dispensers, glass and ceramic mechanism, high chemical resistance, autoclavable (121 C), fully rotational on bottle for optimum positioning, fits directly onto a 45 mm bottle, supplied with 3 bottle adapters (28 mm, 32 mm, 40 mm) Pressmatic R, bottle top dispenser, 0.2-1 ml Pressmatic R, bottle top dispenser, 0.4-2 ml Pressmatic R, bottle top dispenser, 1-5 ml Pressmatic R, bottle top dispenser, 2-10 ml Pressmatic R, bottle top dispenser, 5-30 ml Pressmatic R, bottle top dispenser, 10-60 ml PD10R/HF Pressmatic HF, bottle top dispensers, chemically inert ceramic and PTFE mechanism, fully rotational for optimum positioning, fits directly onto a 45 mm bottle, supplied with 3 bottle adapters (28 mm, 32 mm, 40 mm) Pressmatic HF, bottle top dispenser, 2-10 ml BT30 BT50 DB1400A DB2500A Digital burettes, LCD display, continuous display of volume dispensed, zero reset allows multiple titrations, borosilicate glass barrel allows inspection of liquid, lifetime battery for more than 60,000 titrations with auto-off Digital burette, 30 ml, supplied with 3 bottle adapters (33 mm, 38 mm, 45 mm) Digital burette, 50 ml, supplied with 3 bottle adapters (33 mm, 38 mm, 45 mm) Reservoir with side filling port chamber, 1,400 ml Reservoir with side filling port chamber, 2,500 ml Accessories for bottle top dispensers and digital burettes on request. 23

Also part of our product range: The Specialist for Microplates Microplates with solid, clear or glass bottom Filtration Plates Deep Well Bacti-Growth PCR Plates Reservoir Trays Solid Phase Extraction (SPE) 96-well / 384-well Pin-Tool (Replicator) Laboratory Plasticware Aspirator and wash bottles Narrow and wide neck bottles, dropping or dispensing bottles, square bottles etc. Wide range of different measuring cylinders and beakers Volumetric flasks Petri dishes, pipettes, tubes, plates etc. and much more.. Laboratory Glassware for Chemistry, Industry, and Life Sciences PYREX, MBL and Quickfit CHEMGLASS, AIRFREE and MINUM-WARE PIE-BLOCK, OPTICHEM and CHEMVAC and much more... 24