Numerical Standards Listing ISA-RP2.1-1978 - Manometer Tables ISA-5.1-1984 (R1992) - Instrumentation Symbols and Identification (Formerly ANSI/ISA-5.1-1984 [R1992]) ISA-5.2-1976 (R1992) - Binary Logic Diagrams for Process Operations (Formerly ANSI/ISA- 5.2-1976 [R1992]) ISA-5.3-1983 - Graphic Symbols for Distributed Control/Shared Display Instrumentation, Logic and Computer Systems ISA-5.4-1991 - Instrument Loop Diagrams (Formerly ANSI/ISA-5.4-1991) ISA-5.5-1985 - Graphic Symbols for Process Displays ANS/ISA-5.06.01-2007 - Functional Requirements Documentation for Control Software Applications ANSI/ISA-7.0.01-1996 - Quality Standard for Instrument Air ANSI/ISA-60079-0 (12.00.01)-2005 - Electrical Apparatus for Use in Class I, Zones 0, 1 & 2 Hazardous (Classified) Locations: General Requirements [Supercedes ANSI/ISA-12.00.01-2002 (IEC 60079-0 Ed 3 Mod)] ANSI/ISA-12.01.01-1999 - Definitions and Information Pertaining to Electrical Apparatus in Hazardous (Classified) Locations ANSI/ISA-60079-11 (12.02.01)-2002 [Formerly ANSI/ISA-12.02.01-2002 (IEC 60079-11 Mod)] - Electrical Apparatus for Use in Class I, Zones 0, 1, and 2 Hazardous (Classified) Locations - Intrinsic Safety i ANSI/ISA-60079-27 (12.02.04) -2006, Fieldbus Intrinsically Safe Concept (FISCO) and Fieldbus Non-Incendive Concept (FNICO) ISA-TR12.2-1995 - Intrinsically Safe System Assessment Using the Entity Concept ISA-RP12.2.02-1996 - Recommendations for the Preparation, Content, and Organization of Intrinsic Safety Control Drawings ANSI/ISA-12.04.01-2004 (IEC 60079-2 Mod) - Electrical Apparatus for Explosive Gas Atmospheres - Part 2 Pressurized Enclosures p" ISA-RP12.4-1996 - Pressurized Enclosures ANSI/ISA-RP12.06.01-2003 - Recommended Practice for Wiring Methods for Hazardous (Classified) Locations Instrumentation Part 1: Intrinsic Safety (Formerly ANSI/ISA-RP12.06.01-1995 [R2002]) ANSI/ISA-TR12.06.01-1999 - Electrical Equipment in a Class I, Division 2/Zone 2 Hazardous Location ISA-12.10-1988 - Area Classification in Hazardous (Classified) Dust Locations ANSI/ISA-61241-0 (12.10.02)-2006 -Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - General Requirements
ANSI/ISA-61241-1 (12.10.03)-2006 - Electrical Apparatus for Use in Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Enclosures td ANSI/ISA-61241-11 (12.10.04)-2006, Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Intrinsic Safety id ANSI/ISA-61241-10 (12.10.05-2004) - Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - Classification of Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations ANSI/ISA-61241-2 (12.10.06)-2006 - Electrical Apparatus for Use in Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Pressurization pd ANSI/ISA-61241-18 (12.10.07)-2006 - Electrical Apparatus for Use in Zone 20, Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection by Encapsulation md ANSI/ISA-12.12.01-2007 - Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations ANSI/ISA-60079-15 (12.12.02)-2003 - Electrical Apparatus for Use in Class I, Zone 2 Hazardous (Classified) Locations - Type of Protection n ISA-RP12.12.03-2002 - Recommended Practice for Portable Electronic Products Suitable for Use in Class I and II, Division 2, Class I Zone 2 and Class III, Division 1 and 2 Hazardous (Classified) Locations ANSI/ISA-12.13.01-2003 (IEC 61779-1 through 5 Mod), Performance Requirements for Combustible Gas Detectors ANSI/ISA-TR12.13.01-1999 (R2005) - Flammability Characteristics of Combustible Gases and Vapors ANSI/ISA-RP12.13.02 (IEC 61779-6 Mod), Recommended Practice for the Installation, Operation, and Maintenance of Combustible Gas Detection Instruments (Formerly ISA- RP12.13, Part II-1987) ANSI/ISA-TR12.13.02-1999 (R2005) - Investigation of Fire and Explosion Accidents in Fuel- Related Industries - A Manual by Kuchta ANSI/ISA-12.13.04-2007, Performance Requirements for Open Path Combustible Gas Detectors ANSI/ISA-60079-7 (12.16.01)-2002 [Formerly ANSI/ISA-12.16.01-2002 (IEC 60079-7 Mod)] - Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations Type of Protection - Increased Safety e ANSI/ISA-TR12.21.01-2004 - Use of Fiber Optic Systems in Class I Hazardous (Classified) Locations ANSI/ISA-60079-1 (12.22.01) -2005 - Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations Type of Protection - Flameproof d [Supercedes ANSI/ISA- 12.22.01-2002 (IEC 60079-1 Ed 3 Mod)] ANSI/ISA-60079-18 (12.23.01) -2005 - Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations Type of Protection - Encapsulation m [Supercedes ANSI/ISA-12.23.01-2002 (IEC 60079-18 Mod)]
ANSI/ISA-TR12.24.01-1998 (IEC 60079-10 Mod) - Recommended Practice for Classification of Locations for Electrical Installations Classified as Class I, Zone 0, Zone 1, or Zone 2 ANSI/ISA-60079-5 (12.25.01)-1998 [Formerly ANSI/ISA-12.25.01-1998 (IEC 60079-5 Mod)] - Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations Type of Protection - Powder Filling q ANSI/ISA-60079-6 (12.26.01)-1998 [Formerly ANSI/ISA-12.26.01-1998 (IEC 60079-6 Mod)] - Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations Type of Protection - Oil-Immersion o ANSI/ISA-12.27.01-2003, Requirements for Process Sealing Between Electrical Systems and Flammable or Combustible Process Fluids ISA-18.1-1979 (R2004) - Annunciator Sequences and Specifications (Formerly ANSI/ISA- 18.1-1979 [R1992]) ISA-20-1981 - Specification Forms for Process Measurement and Control Instruments, Primary Elements and Control Valves ISA-TR20.00.01-2001 - Specification Forms for Process Measurement and Control Instruments - Part 1: General Considerations - Updated with 27 New Specification forms in 2004-2006 (also includes ISA-20.00.03-2001, Specification Forms for Process Measurement and Control Instruments - Part 3: Form Requirements and Development Guidelines) ISA-RP31.1-1977 - Specification, Installation and Calibration of Turbine Flowmeters ISA-37.1-1975 (R1982) - Electrical Transducer Nomenclature and Terminology (Formerly ANSI MC6.1-1975) ISA-RP37.2-1982 (R1995) - Guide for Specifications and Tests for Piezoelectric Acceleration Transducers for Aerospace Testing ISA-37.3-1982 (R1995) - Specifications and Tests for Strain Gage Pressure Transducers ISA-37.5-1982 (R1995) - Specifications and Tests for Strain Gage Linear Acceleration Transducers ISA-37.6-1982 (R1995) - Specifications and Tests for Potentiometric Pressure Transducers ISA-37.8-1982 (R1995) - Specifications and Tests for Strain Gage Force Transducers ISA-37.10-1982 (R1995) - Specifications and Tests for Piezoelectric Pressure and Sound- Pressure Transducers ISA-37.12-1982 (R1995) - Specifications and Tests for Potentiometric Displacement Transducers ISA-37.16.01-2002 - A Guide for the Dynamic Calibration of Pressure Transducers ISA-RP42.00.01-2001 - Nomenclature for Instrument Tube Fittings ISA-TR50.02, Parts 3 & 4-2000 - Fieldbus Standard for Use in Industrial Control Systems, Parts 3 & 4: Technical Report for Fieldbus Data Link Layer - Tutorial ISA-TR50.02, Part 9-2000 - Fieldbus Standard for Use in Industrial Control Systems: User Layer Technical Report
ANSI/ISA-50.00.01-1975 (R2002) - Compatibility of Analog Signals for Electronic Industrial Process Instruments (Formerly ISA-50.1-1982 [R1992]) ISA-51.1-1979 (R1993) - Process Instrumentation Terminology ISA-TR52.00.01-2006 - Recommended Environments for Standards Laboratories [Supersedes: ISA-RP52.1-1975] ISA-RP60.1-1990 - Control Center Facilities ISA-RP60.2-1995 - Control Center Design Guide and Terminology ISA-RP60.3-1985 - Human Engineering for Control Centers ISA-RP60.4-1990 - Documentation for Control Centers ISA-RP60.6-1984 - Nameplates, Labels, and Tags for Control Centers ISA-RP60.8-1978 - Electrical Guide for Control Centers ISA-RP60.9-1981 - Piping Guide for Control Centers ISA-RP60.11-1991 - Crating, Shipping and Handling for Control Centers ANSI/ISA-67.01.01-2002 - Transducer and Transmitter Installation for Nuclear Safety Applications (Formerly ANSI/ISA-67.01-1994) ANSI/ISA-67.02.01-1999 - Nuclear Safety-Related Instrument-Sensing Line Piping and Tubing Standard for Use in Nuclear Power Plants ISA-67.03-1982 - Standard for Light Water Reactor Coolant Pressure Boundary Leak Detection ANSI/ISA-67.04.01-2000 - Setpoints for Nuclear Safety-Related Instrumentation ISA-RP67.04.02-2000 - Methodologies for the Determination of Setpoints for Nuclear Safety- Related Instrumentation ANSI/ISA-TR67.04.08-1996 - Setpoints for Sequenced Actions ISA-TR67.04.09-2005 - Graded Approaches to Setpoint Determination ANSI/ISA-67.06.01-2002 - Performance Monitoring for Nuclear Safety-Related Instrument Channels in Nuclear Power Plants (Formerly ISA-67.06-1984) ANSI/ISA-67.14.01-2000 - Qualifications and Certification of Instrumentation and Control Technicians in Nuclear Facilities ISA-71.01-1985 - Environmental Conditions for Process Measurement and Control Systems: Temperature and Humidity ISA-71.02-1991 - Environmental Conditions for Process Measurement and Control Systems: Power ANSI/ISA-71.03-1995 - Environmental Conditions for Process Measurement and Control Systems: Mechanical Influences ISA-71.04-1985 - Environmental Conditions for Process Measurement and Control Systems: Airborne Contaminants ISA-RP74.01-1984 - Application and Installation of Continuous-Belt Weighbridge Scales
ANSI/ISA-75.01.01-2002 (IEC 60534-2-1 Mod) - 2007 - Flow Equations for Sizing Control Valves ANSI/ISA-75.02-1996 - Control Valve Capacity Test Procedures ISA-TR75.04.01-1998 (R2006) - Control Valve Position Stability ANSI/ISA-75.05.01-2000 (R2005) - Control Valve Terminology ISA-75.07-1997 - Laboratory Measurement of Aerodynamic Noise Generated by Control Valves ANSI/ISA-75.08-1999 - Installed Face-to-Face Dimensions for Flanged Clamp or Pinch Valves ANSI/ISA-75.08.01-2002 (R2007) - Face-to-Face Dimensions for Integral Flanged Globe- Style Control Valve Bodies (Classes 125, 150, 250, 300, and 600) ANSI/ISA-75.08.02-2003 - Face-to-Face Dimensions for Flangeless Control Valves (Classes 150, 300 and 600) (Formerly ANSI/ISA-75.04-1995) ANSI/ISA-75.08.03-2001 (R2007) - Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500, and 2500) ANSI/ISA-75.08.04-2001 (R2007) - Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Class 4500) ANSI/ISA-75.08.05-2002 (R2007) - Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500, and 2500) ANSI/ISA-75.08.06-2002 (R2007) - Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900, 1500, and 2500) ANSI/ISA-75.08.07-2001 (R2007) - Face-to-Face Dimensions for Separable Flanged Globe- Style Control Valves (Classes 150, 300, and 600) ANSI/ISA-75.08.08-1999 (R2007) - Face-to-Centerline Dimensions for Flanged Globe-Style Angle Control Valve Bodies (Classes 150, 300, and 600) ANSI/ISA-75.08.09-2004 - Face-to-Face Dimensions for Sliding Stem Flangeless Control Valves (Classes 150, 300, and 600) ANSI/ISA-75.11.01-1985 (R2002) [Formerly ANSI/ISA-75.11-1985 (R1997)] - Inherent Flow Characteristic and Rangeability of Control Valves ANSI/ISA-75.13.01-1996 (R2007) - Method of Evaluating the Performance of Positioners with Analog Input Signals and Pneumatic Output ISA-75.17-1989 - Control Valve Aerodynamic Noise Prediction ANSI/ISA-75.19.01-2007 - Hydrostatic Testing of Control Valves ISA-RP75.21-1989 (R1996) - Process Data Presentation for Control Valves ISA-RP75.23-1995 - Considerations for Evaluating Control Valve Cavitation ANSI/ISA-75.25.01-2000 - Test Procedure for Control Valve Response Measurement from Step Inputs ANSI/ISA-TR75.25.02-2000 - Control Valve Response Measurement from Step Inputs
ANSI/ISA-75.26.01-2006, Control Valve Diagnostic Data Acquisition and Reporting ISA-RP76.0.01-1998 - Analyzer System Inspection and Acceptance ANSI/ISA-76.00.02-2002 - Modular Component Interfaces for Surface-Mount Fluid Distribution Components - Part 1: Elastomeric Seals ANSI/ISA-77.13.01-1999 - Fossil Fuel Power Plant Steam Turbine Bypass Systems ANSI/ISA-77.20-1993 (R2005) - Fossil Fuel Power Plant Simulators - Functional Requirements ANSI/ISA-77.41.01-2005 - Fossil Fuel Power Plant Boiler Combustion Controls ANSI/ISA-77.42.01-1999 (R2006) - Fossil Fuel Power Plant Feedwater Control System - Drum Type ANSI/ISA-77.43.01-1994 (R2002) - Fossil Fuel Power Plant Unit/Plant Demand Development - Drum Type (Formerly ANSI/ISA-77.43.01-1994) ANSI/ISA-77.44.01-2007 - Fossil Fuel Power Plant - Steam Temperature Controls ISA-RP77.60.02-2000 (R2006) - Fossil Fuel Power Plant Human-Machine Interface: Alarms ISA-TR77.60.04-1996 (R2004) - Fossil Fuel Power Plant Human-Machine Interface - Electronic Screen Displays ISA-RP77.60.05-2001 - Fossil Fuel Power Plant Human-Machine Interface: Task Analysis ANSI/ISA-77.70-1994 (R2005) - Fossil Fuel Power Plant Instrument Piping Installation ANSI/ISA-61010-1 (82.02.01) CSA C22.2 No. 1010.1 and ANSI/UL 61010-1 - Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1: General Requirements (Updated with Annex DV US 22 July 2005) ANSI/ISA-61010-031 (82.02.02)-2007 - Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test ISA-82.03-1988 - Safety Standard for Electrical and Electronic Test, Measuring, Controlling, and Related Equipment (Partial Revision and Redesignation of ANSI C39.5-1974) ANSI/ISA-84.00.01-2004 Part 1(IEC 61511-1 Mod) - Functional Safety: Safety Instrumented Systems for the Process Industry Sector - Part 1: Framework, Definitions, System, Hardware and Software Requirements ANSI/ISA-84.00.01-2004 Part 2 (IEC 61511-2 Mod) - Functional Safety: Safety Instrumented Systems for the Process Industry Sector - Part 2: Guidelines for the Application of ANSI/ISA- 84.00.01 Part 1 (IEC 61511-1 Mod) - Informative ANSI/ISA-84.00.01-2004 Part 3 (IEC 61511-3 Mod) - Functional Safety: Safety Instrumented Systems for the Process Industry Sector - Part 3: Guidance for the Determination of the Required Safety Integrity Levels - Informative ISA-TR84.00.02-2002 - Part 1: Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 1: Introduction
ISA-TR84.00.02-2002 - Part 2: Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 2: Determining the SIL of a SIF via Simplified Equations ISA-TR84.00.02-2002 - Part 3: Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 3: Determining the SIL of a SIF via Fault Tree Analysis ISA-TR84.00.02-2002 - Part 4: Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 4: Determining the SIL of a SIF via Markov Analysis ISA-TR84.00.02-2002 - Part 5: Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 5: Determining the PFD of SIS Logic Solvers via Markov Analysis ISA-TR84.00.03-2002 - Guidance for Testing of Process Sector Safety Instrumented Functions (SIF) Implemented as or Within Safety Instrumented Systems (SIS) ISA-TR84.00.04-2005 Part 1, Guidelines for the Implementation of ANSI/ISA-84.00.01-2004 (IEC 61511 Mod) ISA-TR84.00.04-2005 Part 2, Example Implementation of ANSI/ISA-84.00.01-2004 (IEC 61511 Mod) ISA-88.01-1995 (R2006) - Batch Control Part 1: Models and Terminology ANSI/ISA-88.00.02-2001 - Batch Control Part 2: Data Structures and Guidelines for Languages ANSI/ISA-88.00.03-2003 - Batch Control Part 3: General and Site Recipe Models and Representation ISA-TR88.0.03-1996 - Possible Recipe Procedure Presentation Formats ANSI/ISA-88.00.04-2006, Batch Control Part 4: Batch Production Records ANSI/ISA-91.00.01-2001 - Identification of Emergency Shutdown Systems and Controls That Are Critical to Maintaining Safety in Process Industries ISA-TR91.00.02-2003, Criticality Classification Guideline for Instrumentation ISA-92.0.01, Part I-1998 - Performance Requirements for Toxic Gas-Detection Instruments: Hydrogen Sulfide ISA-RP92.0.02, Part II-1998 - Installation, Operation, and Maintenance of Toxic Gas- Detection Instruments: Hydrogen Sulfide ANSI/ISA-92.02.01, Part I-1998 (R2007) - Performance Requirements for Carbon Monoxide Detection Instruments (50-1000 ppm Full Scale) ISA-RP92.02.02, Part II-1998 - Installation, Operation, and Maintenance of Carbon Monoxide Detection Instruments (50-1000 ppm Full Scale) ISA-92.03.01-1998 - Performance Requirements for Ammonia Detection Instruments (25-500 ppm) ISA-RP92.03.02-1999 - Installation, Operation, and Maintenance of Ammonia Detection Instruments (25-500 ppm Full Scale) ANSI/ISA-92.04.01, Part I-2007 - Performance Requirements for Instruments Used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres
ISA-RP92.04.02, Part II-1996 - Installation, Operation, and Maintenance of Instruments Used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres ISA-92.06.01-1998 - Performance Requirements for Chlorine Detection Instruments (0.5-30 ppm Full Scale) ISA-RP92.06.02-1999 - Installation, Operation, and Maintenance of Chlorine Detection Instruments (0.5-30 ppm Full Scale) ANSI/ISA-TR92.06.03-1999 - Feasibility of Chlorine Detection Instrument Testing ANSI/ISA-93.00.01-1999 - Standard Method for the Evaluation of External Leakage of Manual and Automated On-Off Valves ANSI/ISA-95.00.01-2000 - Enterprise-Control System Integration - Part 1: Models and Terminology ANSI/ISA-95.00.02-2001 - Enterprise-Control System Integration - Part 2: Object Model Attributes ANSI/ISA-95.00.03-2005 - Enterprise-Control System Integration - Part 3: Activity Models of Manufacturing Operations Management ANSI/ISA-95.00.05-2007 - Enterprise-Control System Integration - Part 5: Business-to- Manufacturing Transactions ISA-MC96.1-1982 - Temperature Measurement Thermocouples ANSI/ISA-98.00.01-2002 - Qualifications and Certification of Control Systems Technicians ISA-TR98.00.02-2006, Skill Standards for Control System Technicians ANSI/ISA-TR99.00.01-2004 - Security Technologies for Manufacturing and Control Systems ANSI/ISA-TR99.00.02-2004 - Integrating Electronic Security into the Manufacturing and Control Systems Environment ISA-TR100.00.01-2006 - The Automation Engineer s Guide to Wireless Technology Part 1 -- The Physics of Radio, a Tutorial ANSI/ISA-61804-3 (104.00.01)-2007, Function Blocks (FB) For Process Control Part 2: Electronic Device Description Language ANSI/ISA-TR61804-4 (104.00.02)-2007, Function Blocks (FB) for Process Control Part 4: EDD Interoperability Guideline