Introduction to Mil-tek - PDF Free Download

Minimize your waste

TABLE OF CONTENTS 4 ABOUT MIL-TEK 7 MACHINE LINE-UP 8 EN16500 STANDARD 11 BLUE IS GREEN 12 HEALTH & SAFETY 14 QUALITY & ENVIRONMENTAL POLICY 15 GLOBAL NETWORK

ABOUT MIL-TEK In the beginning Denmark, 1992. A Supermarket Manager named Kristian Skannerup had become increasingly frustrated that cardboard and plastic waste was cluttering his workspace. He set about designing a machine that would resolve this issue. Within 2 years, demand for the solution rocketed as businesses around the world sought to optimize their workspace with a simple, low-energy solution. Large mill-size balers became increasingly unpopular in favour of smaller, quieter machines. Mil-tek s growth has seen it s expansion to a wide range of balers, waste compactors, polystyrene compactors, can crushers, hydraulic presses and accessories. Mil-tek continues to go from strength to strength. With over 60 sales and distribution channels around the world, we continue our commitment to produce environmentally friendly balers and compactors for an environmentally conscious market. Mil-tek was founded in 1992 in Denmark. From there it expanded to over 60 locations in 30 countries. 4 ABOUT MIL-TEK

ABOUT MIL-TEK 5

Model 2101 Model 2305 6 MACHINE LINE-UP Model 2102 Model 2205 Model 2306 Model 2509

XP - Series EPS Compactors Mill Size Balers MACHINE LINE-UP A baler or compactor for every task Mil-tek are the leading supplier of balers and compactors specializing in recycling solutions designed to minimize waste for companies of all shapes and sizes. From our smallest baling machines which have a floor space footprint of just 52cm² to our largest covering 7.5 m², our balers make cardboard bales from 40kg to 450kg in weight. Mil-tek s machinery can process a number of different materials from cardboard & plastic to EPS, food and hazardous waste. Whatever the size and scale of your operation, Miltek has a financial and environmental solution that will suit your workplace, your working environment and your working requirements. MACHINE LINE-UP 7

EN16500 STANDARD New standard for vertical balers Over the past number of years, Mil-tek has worked wit the HSE (Health and Safety Executive) committee that has been committed to creating new and improved standards for the safe use of vertical balers. As a result of these regular committee meetings, the CEN (the European Committee for Standardization) have introduced the new EN16500:2014 standards, which are designed to rigorously protect users through all aspects of the machines operation. These standards cover all aspects of use including but not exclusive to the bale chamber, the bale ejection area, the controls actuators and devices, emergency stop systems, noise reduction, instruction manuals and labels and any other potential hazards a user could face. The design of the machine is entirely committed to ergonomic and safe use. In accordance with these new standards, Mil-tek has updated its range of balers (models 2102, 2205, 2305, 2306 and 2509) with key changes and improvements to comply with these standards. In addition, though not a baler, our new 2101 Can Crusher has been designed to meet this new safety standard. Vital Health and Safety Requirements Due to the nature of machinery used in the waste and recycling industry, it is vital to stay ahead of health and safety requirements to minimize the risk of accidents and to ensure safe instructions are available for the users of waste handling equipment. Mil-tek have been manufacturing Balers and Compactors since 1992 and have been at the forefront of compliance and proactivity in improving health and safety standards since this time. Our machines have been certified by CE (Europe), ANSI (American National Standards Institute) and AS/NZ 4024.1, (Australia & New Zealand). The Danish headquarters have been certified by DNV in both ISO 14001 and ISO9001. Our commitment to safety in general and safe machine use is unparalleled. 8 EN16500 STANDARD

EN16500 STANDARD 9

10 BLUE IS GREEN

BLUE IS GREEN By minimizing waste, you help improve the environment Mil-tek range of blue, air-powered balers are also green, in the sense that they are made to optimize waste handling and help our customers manage and dispose of their waste in a responsible and environmentally-friendly manner. In our production, we seek to minimize waste and to maximise the efficient use of materials and resources. Mil-tek air-powered balers are equipped with our world-patented ECOdrive low-energy system, reducing energy consumption by up to 60%. Mil-tek s blue balers encourage green behaviour and can be part of your environmental and sustainability program. Minimizing waste means the world to us. BLUE IS GREEN 11

HEALTH & SAFETY Mil-tek balers and compactors are simple, easy and safe to operate with built-in fail-safe mechanisms. They go through rigorous tests to conform to global safety standards. You re in safe hands In over 24 years of business, Mil-tek have an untested product liability insurance. That s a 100% safety record. How? At Mil-tek, our Health & Safety guarantee isn t just about the Mil-tek machinery. Years of experience are built into the Mil-tek solution to create a safer working experience where heavy lifting is avoided, bales are strapped safely and securely at working height and the noise of the machine is minimal. Safety is as important to us as it is to our customers. Waste handling in many working environments is performed on a daily basis by a diverse group of employees of varying ages and backgrounds and can include a large number of short-term staff. Mil-tek balers and compactors are simple, easy and safe to operate with built-in fail-safe mechanisms. They go through rigorous tests to conform to global safety standards. Compact at source A carefully analysed and planned sorting process minimizes the risk of injuries caused by waste congestion in the workplace, or of injury from moving bulky uncompacted waste. Quality-safety banding To provide additional safety at the workspace, we provide our very own Mil-tek banding. The Mil-tek produced banding is manufactured in-house at our headquarters in Denmark and is available for purchase on our web-shop in many locations around the world. Our Banding is safety tested to withstand more than the bale weights our balers can produce, ensuring that dense bales remain intact for transportation and offering peace of mind to the user that they will not break during the baling process. 12 HEALTH & SAFETY

MIL-TEK OFFICIAL 3-YEARS SERVICE LICENSE Valid from the 23rd October 2015. Rene Artelt, Mil-tek Nordrhein has successfully participated in the Mil-tek Academy Technical Training. He/she is hereby qualified to carry out Service Training on the covered Mil-tek Products. /S Jesper Skannerup, Head of Technical Education ressors Comp c le 1: al eumati Modu 2: Pn ro-mechanic le u d ct Mo le E : le 3 lic u ra d Modu Hy le 4: Modu EPS o le 5: al Intr Modu Technic : 6 le Modu A 23/10/2015 Aut ho Mil-tek Danmark A/S Mil-tek Technician ed riz Mi l-te ar k Danm k Mil-tek Danmark A/S - Torstedvej 4-8 - 6990 Ulfborg, Denmark - info@miltek.dk www. Mil-tek.com HEALTH & SAFETY 13

QUALITY & ENVIRONMENTAL POLICY A commitment to quality and environmentallyfriendly business conduct Mil-tek A/S wish to develop and produce products in line with both our customers and the authorities expectations and requirements. To meet these demands, Mil-tek have created a management system that meets the requirements of both DS/ EN ISO 9001* and DS/EN ISO 14001. Our vision is to be a leading supplier of waste balers and compactors, with comprehensive expertise in waste, waste handling and recycling, technology and economy, in a safe, healthy and secure environment. Mil-tek s main task is to offer solutions for waste compaction and recycling on a quality, environmental and economic basis with high competitive ability. Mil-tek is aware that the handling, treatment and recycling of waste pose environmental and safety impacts. Therefore we focus on the environment and a safe working-environment as a priority in resolving all Mil-tek tasks. The Quality and Environmental Policy applies to the entire organisation, and to the people who work on behalf of Mil-tek who are, where appropriate, observed by all employees in their daily functions, tasks and actions. 14 QUALITY & ENVIRONMENTAL POLICY

GLOBAL NETWORK Mil-tek trained personnel offer a full consultancy service, offering a full waste audit including time and motion studies to ensure you adopt the leanest waste handling process. Committed to excellence Mil-tek s global network operates out of 30 countries around the world, providing a national solution in all territories we enter. Our Franchise Partners and Distributors go through regular, rigorous training programs to ensure they understand the products and business ethics that are so important to mil-tek. Regular technical improvements ensure that Mil-tek can continue to build machines for today and future business requirements. Whatever business segment you are in, Mil-tek trained personnel offer a full consultancy service, offering a full waste audit including time and motion studies to ensure you adopt the leanest waste handling process in order to minimize your overall waste costs and maximise your efficiency. To contact Mil-tek, log on to www.mil-tek.com and select the contact page which lists all territories where our products are available. Our individual territory websites will then point you in the direction of your nearest supplier. We strive to respond to all contact requests on our website within 24 hours. GLOBAL NETWORK 15

For Marketing & Press, contact: Mil-tek Marketing Dept. at marketing@miltek.dk For Sales & Products, contact: Mil-tek Sales Dept. at products@miltek.dk If you would like to become a Distributor, contact: Mil-tek Headquarters at distributor@miltek.dk 2016 Mil-tek A/S. All Rights Reserved. Mil-tek, Miltek and Mil-tek logo is registered trademarks of Mil-tek Denmark A/S.