Navion LED Area, Site and Roadway Luminaire

Navion LED Area, Site and Roadway Luminaire

Roadway Lighting Redefined A New Performance Standard in LED Roadway Lighting With industry-leading, patented optics in a scalable package, the Navion LED area, site and roadway luminaire delivers state-of-the-art optical control, low maintenance costs, rugged construction and modern styling. The Navion fixture is designed for years of operation with minimal service requirements. Its superior performance and configurability provide uniform, glare-free, energy-efficient light for commercial, industrial and municipal parking lots as well as roadway applications. Customer-Focused Design Designed to meet the full range of outdoor lighting challenges in area, site and roadway applications, the Navion luminaire is available with a wide array of optics and specification performance features. A tool-less, removable power tray door and quick electrical disconnects make installation and maintenance a snap. 10kV common (line-to-ground) and differential (line-to-line) surge protection is standard. Four-bolt mounting with cast-in leveling steps ensures simple installation, while a Super TGIC polyester powder-coat finish provides years of worry-free ownership. Long Life with Low Maintenance Costs Superior illumination, low maintenance, long life, and low cost of ownership are critical factors when lighting roads and public spaces. Ideal for retrofit and new construction applications, the Navion luminaire can be tailored to meet your most important needs without compromising on specification features. The five configurations of the Navion fixture allow scalability from 3,600 to 22,000 delivered lumens. 4000K / 70 CRI is standard, with 6000K / 70 CRI and 3000K / 80 CRI options available. LED components are IP66 rated and the fixture is wet-location listed, with an IP66 housing option available. 1

Each of the patented Cooper Lighting AccuLED Optics in the LED Light Square renders the entirety of the pattern. As the number of LEDs increases, so does the illuminance, allowing lumen output and energy consumption to be scaled and optimized for each application. The AccuLED optic ensures that every lumen produced by the LED is delivered where needed. Uplight, glare, obtrusive spill light and overlit hot spots are replaced by uniform, application-tailored illumination. 2

Navion Design Excellence Stepping Up to the Challenge The Navion luminaire is designed to provide superior optical performance in a package that is easy to install and maintain. With HID equivalents from 70W HPS up to 400W MH, and Cooper Lighting s industry-leading AccuLED Optics TM system, the Navion fixture is designed to meet the toughest lighting challenges. Construction Tool-less entry with hinged removable power door for easy maintenance 3G vibration rated IP66 LED Light Squares Wet location rated housing (IP66 housing optional) Extruded aluminum heat sink scaled to lumen package Rugged, die-cast aluminum housing Electrical Operates in -40 C to 40 C ambient temperatures with optional 50 C high ambient configuration 10kV common (line-to-ground) and differential (line-to-line) surge protector L90, 60,000 hours at 40 C, compliant with IESNA TM-21 LED driver mounted directly to removable door for optimal heat sinking 120-277V 50/60Hz, 347V 60Hz, or 480V 60Hz operation Quick-disconnects for tool-less removal of power door Finish Five-stage super TGIC paint resists extreme weather conditions while providing optimal color and gloss retention. Available in standard grey or optional bronze, black, dark platinum, graphite metallic or white. Grey Dark Platinum Bronze Warranty Five-year limited warranty Graphite Metallic Black White Tool-less Entry Stainless steel latches provide easy, tool-less access to electrical compartment, even with lineman s gloves. Quick Disconnects Connections between power door and housing are made with tool-less quick disconnects. Power door removes in seconds. Bird Guard Standard bird guard fits securely around 1-1/4" and 2" pipe (1-5/8" to 2-3/8" O.D.). Four-Bolt Mounting Sturdy four-bolt mounting brackets fit 1-1/4" to 2" pipe (1-5/8" to 2-3/8" O.D.). Available with optional built-in level indicator for a secure, level installation. 3

...Extruded Aluminum Heat Sinks...Tool-less Entry Scalable Lumen Package... Self-Cleaning Heat Sinks Optional Features NEMA Photocontrol Receptacle Gasketed receptacle for mounting standard NEMA photocontrol (order separately). Surge Protection Standard 10kV common (line-to-ground) and differential (line-to-line) mode protection. Occupancy Sensor Optional motion sensor reduces energy use for site lighting applications. IP66 Rating Housing available with IP66 rating for dust and water. 4

5

Versatility and Simplicity The Navion luminaire is designed to meet a wide range of outdoor lighting needs, from single-fixture applications to large-scale parking lots. Commercial customers will find it ideal for office buildings and shopping centers. Its higher-lumen configurations excel in large parking applications, such as institutions, retail, airports, manufacturing and distribution facilities. Whatever the application, the Navion luminaire delivers superior optical performance in a durable, modern design, while providing 30-70% less energy usage compared to typical HID luminaires. With 90% lumen maintenance at 60,000 hours (over 16 years at 10 hours daily use), the Navion fixture offers a long life and additional savings in maintenance costs. The Navion luminaire is offered in ten optical packages to meet the exact needs of the illuminated area, and the fixture s size and construction are scaled to the specific lumen package. Designed to withstand harsh environments, its rugged, die-cast aluminum construction and 2.5-mil polyester powder-coat finish provide superior protection. 3G vibration rating and 10kV dual-mode surge protection are standard. The Navion luminaire s performance comes with years of low-cost, low-hassle ownership. With lumen maintenance and life expectancy far beyond traditional HID light sources, regular and time-consuming service visits are a thing of the past. The simple and spacious Navion fixture housing is designed to fit lineman s gloves and can be installed with simple tools. Key electrical components are mounted on the power door, so service is tool-less. The door is small enough to hold in one hand, making field replacement a snap. 6

Scalable Illumination with LED Light Squares Energy Savings and Environmental Stewardship The simplest and most effective way to reduce a lighting fixture s impact on the environment is to minimize its energy consumption. By incorporating Cooper Lighting s Light Squares, the Navion luminaire provides energy savings from 30% to 70% compared to standard HID solutions. Long Life With a 60,000+ hour rated life (at 90% lumen maintenance), the Navion fixture operates six times longer than traditional metal halide solutions. Low Maintenance With simple quick disconnects, Light Squares are easily removed in the field for replacement or rotation of optics. Superior Efficiency and Control With efficiencies as high as 95%, the patented AccuLED Optics TM system is up to 30% more efficient than traditional HID optical systems. Available in ten beam distributions, the AccuLED Optics system provides the flexibility and performance required for any outdoor application. Ten Optical Distributions Five Asymmetric Distributions Type 2 Type 3 Type 4 Rectangular Wide Warm White Color Lighting designers, architects and specifying engineers have long preferred light sources that provide a balanced spectral power distribution and warm white light. Many LED solutions standardize on a cold blue 6000-6500K correlated color temperature (CCT) to maximize lumen output. The Navion LED provides warm white light at a standard 4000K CCT with no sacrifice in lumen output. Three Spill Light Eliminator Distributions SL2 SL3 SL4 4000K nominal Three Symmetric Distributions Type 5 Square Extra Wide Type 5 Square Wide Type 5 Square Medium 2700K High Pressure Sodium [2000K] 3000K 4500K 6500K Metal Halide [Quartz, Ceramic] Cooper LED Squares [4000K] Cold LED [6000-6500K] 7

Performance and Versatility The Navion luminaire is built around LED technology and designed to accommodate ongoing improvements in LED chips and drivers, making it the ideal solution for both current and future lighting requirements. Power and Lumens by Light Square Count Number of Light Squares 1 2 3 4 6 Power (Wattage) 51 103 154 206 309 Current @ 120V (A) 0.43 0.86 1.29 1.72 2.58 Current @ 277V (A) 0.19 0.38 0.57 0.76 1.14 Optics T2 T3 T4 SL2 SL3 SL4 RW 5MQ 5WQ 5XQ Lumens 3762 7557 11367 14831 22196 BUG Rating 1-0-1 2-0-2 3-0-3 3-0-3 3-0-3 Lumens 3748 7548 11324 14774 22111 BUG Rating 1-0-1 2-0-2 3-0-3 3-0-3 3-0-3 Lumens 3593 7236 10856 14164 21197 BUG Rating 1-0-1 1-0-2 2-0-2 2-0-3 3-0-4 Lumens 3686 7423 11156 14529 21744 BUG Rating 1-0-1 1-0-2 2-0-2 2-0-2 3-0-3 Lumens 3640 7331 10999 14351 21477 BUG Rating 1-0-1 1-0-2 2-0-2 2-0-3 3-0-4 Lumens 3702 7455 11184 14592 21838 BUG Rating 1-0-1 1-0-2 2-0-2 2-0-3 3-0-4 Lumens 3756 7565 11350 14808 22161 BUG Rating 2-0-2 3-0-3 3-0-3 3-0-3 4-0-4 Lumens 3954 7962 11945 15585 23324 BUG Rating 2-0-1 3-0-2 4-0-2 4-0-2 5-0-3 Lumens 3930 7914 11874 15492 23185 BUG Rating 3-0-1 3-0-2 4-0-2 4-0-2 5-0-3 Lumens 3834 7721 11584 15113 22618 BUG Rating 2-0-2 3-0-3 4-0-3 4-0-3 5-0-4 Power (Watts) Number of Light Squares Power (Watts) Typical Equivalent 1 51W 70-100W HPS, 175W MV 2 103W 100-200W HPS, 175-200W MH 3 154W 200-250W HPS, 200-250W MH 4 206W 250-400W HPS, 250-350W MH 6 309W 400W HPS, 350-400W MH NOTE: Light squares are standard 4000K CCT and nominal 70 CRI. Lumen Maintenance Ambient Temperature TM-21 Lumen Maintenance (60,000 Hours) Theoretical L70 (Hours) 25 C > 94% > 350,000 40 C > 93% > 250,000 50 C > 90% > 170,000 8

Ordering Information Sample Number: NAV-AA-01-E-UNV-T3-10K-AI-AP Product Family NAV=Navion LED Light Engine AA=1050mA, UL Class 2 Number of Light Squares 1 Driver Voltage Distribution Surge Protection 01=1 02=2 03=3 04=4 06=6 E=Non-Dimming D=Dimming UNV=Universal 120-277V 347=347V 480=480V T2= Type II Area T3= Type III Area T4= Type IV Short SL2= Type II with Spill Control SL3= Type III with Spill Control SL4= Type IV with Spill Control RW=Rectangular Wide 5MQ= Type V Square Medium 5WQ= Type V Square Wide 5XQ= Type V Square Extra Wide 10K= Cooper 10kV Surge Module (Standard) X= Driver Surge Protection Only 2 Options (Add as Suffix) AI=Arm Included 3 PER= NEMA Twistlock Photocontrol Receptacle K=Level Indicator 7060=70 CRI 6000K 4 8030=80 CRI 3000K 4 2L=Two Circuits 5 IP66=IP66 Rated HA=50 C High Ambient Accessories (Order Separately) OA/RA1016= NEMA Photocontrol - Multi-Tap OA/RA1027= NEMA Photocontrol - 480V OA/RA1201=NEMA Photocontrol - 347V OA/RA1013=Photocontrol Shorting Cap OA/RA1014=NEMA Photocontrol - 120V OA1223=10kV Surge Module Replacement MA1010-XX=Single Tenon Adapter for 3-1/2" O.D. Tenon LCF= Light Square Cover Plate Matches Housing Color MS-L08= On/Off Motion Sensor, Maximum 8' Mounting Height 6 MS-L20= On/Off Motion Sensor, 9'-20' Mounting Height 6 MS-L40= On/Off Motion Sensor, 21'-40' Mounting Height 6 MS/X-L08= Bi-Level Motion Sensor, Maximum 8' Mounting Height 7 MS/X-L20= Bi-Level Motion Sensor, 9'-20' Mounting Height 7 MS/X-L40= Bi-Level Motion Sensor, 21'-40' Mounting Height 7 MA1011-XX=2 @ 180 Tenon Adapter for 3-1/2" O.D. Tenon MA1012-XX=3 @ 120 Tenon Adaptor for 3-1/2" O.D. Tenon MA1013-XX=4 @ 90 Tenon Adapter for 3-1/2" O.D. Tenon MA1014-XX=2 @ 90 Tenon Adapter for 3-1/2" O.D. Tenon MA1015-XX=2 @ 120 Tenon Adapter for 3-1/2" O.D. Tenon MA1016-XX=3 @ 90 Tenon Adapter for 3-1/2" O.D. Tenon Color AP=Grey (Standard) BZ=Bronze BK=Black DP=Dark Platinum GM=Graphite Metallic WH=White MA1017-XX=Single Tenon Adapter for 2-3/8" O.D. Tenon MA1018-XX=2 @ 180 Tenon Adapter for 2-3/8" O.D. Tenon MA1019-XX=3 @ 120 Tenon Adapter for 2-3/8" O.D. Tenon MA1045-XX=4 @ 90 Tenon Adapter for 2-3/8" O.D. Tenon MA1048-XX=2 @ 90 Tenon Adapter for 2-3/8" O.D. Tenon MA1049-XX=3 @ 90 Tenon Adapter for 2-3/8" O.D. Tenon NOTES: 1 Standard 4000K CCT and nominal 70 CRI. 2 Consult factory for driver surge protection values. 3 22 upsweep arm. Round pole adapter and mounting hardware included, M drill pattern. 4 Consult factory for lead times and lumen multiplier. 5 Low-level output varies by number of light squares specified. Consult factory. Requires 2 or more light squares. No terminal block with 2L option. 6 Sensor mounted internally for 1, 2, 4 and 6 light square configurations. Sensor mounted externally 3 light square configuration. Consult factory for additional information. 7 Sensor mounted internally for 1, 2, 4 and 6 light square configurations. Sensor mounted externally 3 light square configuration. Factory set to 50% dimming of light output of all light squares after five minutes of inactivity. Available with D dimming driver only. Consult factory for additional information. Dimensions 1, 2 or 3 Light Squares 1 Light Square 5-7/32" [132mm] 4 or 6 Light Squares 4 Light Squares 5-7/32" [132mm] 8-7/8" [225mm] 21-1/2" [546mm] 2 Light Squares 15" [381mm] 6 Light Squares 27-5/8" [701mm] 3 Light Squares 27-5/8" [701mm] 33-5/8" [854mm] Lumen Multiplier Arm Drilling Type "M" Additional Information Compliances 2-5/16" [59mm] 3/4" [19mm] Dia. Hole 2-7/16" [62mm] 4-7/8" [124mm] (2) 5/8" [16mm] Dia. Holes UL and cul Wet Location Listed IP66 Light Squares 3G Vibration Rated ARRA Compliant DLC Compliant* ISO 9001 Optional Arm 22" Upsweep Arm 7" [178mm] 33-5/8" [854mm] Technical Data (Electronic Driver) +40 C Ambient Temperature Rating -40 C Ambient Temperature Rating Optional 50 C (HA) Ambient Temperature Rating 0.9 Power Factor <20% Total Harmonic Distortion 120V-277V/50 and 60 Hz 347V/60 Hz, 480V/60 Hz 22" [559mm] EPA (Effective Projected Area - Square Feet) Number of Light Squares 1 Square 2 Square s 3 Square s 4 Square s 6 Square s Rise 8" [203mm] 2-3/8" [60mm] 9-3/4" [246mm] Without Arm 0.8 1.0 1.2 1.2 1.4 With Arm 1.2 1.3 1.5 1.5 1.7 Ambient Temperature Shipping Data (Approximate Net Weight) 1 Square 17 lbs. (7.7 kgs.) 2 Square 22 lbs. (10.0 kgs.) 3 Square 26 lbs. (11.8 kgs.) 4 Square 31 lbs. (14.1 kgs.) 6 Square 36 lbs. (16.3 kgs.) Lumen Multiplier 10 C 1.04 15 C 1.03 25 C 1.00 40 C 0.96 50 C 0.92 Lumen Maintenance Ambient Temperature TM-21 Lumen Maintenance (60,000 Hours) Theoretical L70 (Hours) 25 C > 94% > 350,000 40 C > 93% > 250,000 50 C > 90% > 170,000 * www.designlights.org 9 NOTE: Specification and dimensions subject to change without notice.

The World of LED Innovation Cooper Lighting s Innovation Center boasts 60,000 square feet of the most advanced equipment and brightest talent. The multi-million dollar facility is home to the research, development, design, validation, and manufacturing of proprietary LED and other advanced lighting technologies. Teams of highly-skilled mechanical, electrical, thermal, optical and reliability engineers work side-by-side with industrial designers, lab technicians and manufacturing personnel to accelerate the development and commercialization of industry-leading LED solutions. Performance Testing Laboratory Cooper Lighting s Reliability and Thermal Laboratory ensures our LED luminaires meet stated performance ratings over their lifetime. Our lab experts use the most advanced environmental and thermal mapping test equipment, along with rigorous testing protocol and statistical analysis tools, to ensure long-term performance of LED components, systems and finished luminaires. Research and Development The Research and Development Prototyping area houses world-class rapid prototype equipment and lean manufacturing work-cells to reliably deploy new advanced lighting technologies. The modernized rapid prototyping lab includes the latest milling and Computer Numeric Control equipment and an advanced quality lab for layout and validation. Quality Testing and Assurance Facility By involving the Innovation Center operations team throughout the design process, utilizing tools like Failure Modes and Effects Analysis, we have optimized our manufacturing process and mitigated the risks of premature failure. Our state-of-the-art Pilot Production area incorporates modular and transferable cell construction, a temperature and humidity controlled environment, and ESD protection for a well manufactured fixture each and every time. Electrical and Optical Laboratory Cooper Lighting s Certified Test Laboratory conducts extensive testing of electrical, optical and thermal properties for robustness in application and intended performance over rated life. The testing performed is capable of validating products to industry standards such as LM-79, LM-80, ENERGY-STAR and UL. The Photometric Laboratory has received continuing National Voluntary Laboratory Accreditation Program (NVLAP) accreditation (NVLAP Lab Code 200050-0) for solid-state lighting (SSL) test methods in Energy Efficient Lighting Products. 10

Cooper Lighting Headquarters 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.cooperlighting.com International Sales Cooper Lighting 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 F: 770-486-4801 Canada Sales Cooper Lighting 5925 McLaughlin Road Mississauga, Ontario L5R 1B8 P: 905-501-3000 F: 905-501-3172 The Cooper Lighting Family Halo Halo Commercial Portfolio IRiS RSA Metalux Corelite Neo-Ray Fail-Safe MWS Ametrix Shaper io Lumark McGraw-Edison Invue Lumière Streetworks AtLite Sure-Lites Domestic Distribution Facilities Cranbury, New Jersey Elk Grove Village, Illinois Irving, Texas Bloomington, California Peachtree City, Georgia Canadian Distribution Facilities Calgary, Alberta T2E 7V9 Mississauga, Ontario L5R 1B8 The Cooper Controls Family Greengate ilumin Zero 88 Fifth Light Technology ilight (International Only) 25% PCRF Cooper Lighting, Innovation you can rely on, Lumark and Navion are valuable trademarks of Cooper Industries in the United States and other countries. You are not permitted to use the Cooper Trademarks without the prior written consent of Cooper Industries. Cooper Industries plc 600 Travis, Ste. 5600 Houston, TX 77002-1001 P: 713-209-8400 www.cooperindustries.com ADH121225 Printed in USA