SAPS GUARDRAIL CONCRETE The SAPS guardrail for concrete applications attaches to an embedded anchor and provides a 5000 lb point of tie-off. The 42 inch and 60 inch models meet OSHA height requirements. Made in the United States with heavy-duty steel, this guardrail system can be reused time over time. Installs in under a minute without the need for any tools. Rotatable rail member brackets with vise clamping Braced base plate for maximum support Use with SAPS Spider Anchor or SAPS Dualie Anchor SAP21D 2 0.5 H 21 Inch Guardrail with D-Ring 5000 lb point of tie-off SAP42D 3 9.5 H 42 Inch Guardrail with D-Ring 5000 lb point of tie-off SAP60D 5 3.5 H 60 Inch Guardrail with D-Ring 5000 lb point of tie-off SAPS Spider Anchor 6-24 H Guardrail anchor embed SAPS Toeboard 10 Inch 10 W x 10 D Toeboard attachment for SAP21D & SAP42D SAPS Toeboard 14 Inch 14 W x 14 D Toeboard attachment for SAP60D
SAPS GUARDRAIL CONCRETE - WIRE CABLE The SAPS guardrail for concrete applications attaches to an embedded anchor and provides a 5000 lb point of tie-off. Used with wire rope cable. Featuring a permanent D-ring and a braced base plate for maximum support. Meets OSHA height requirements. Made in the United States with heavy-duty steel, this guardrail system can be reused time over time. Braced base plate Use with SAPS SpiderAnchor or Dualie Anchor SAP60DW 5 4 H 60 Inch Wire Cable Guardrail with D-Ring SAP60DWC 5 4 H 60 Inch Wire Cable Guardrail with D-Ring (Corner) SAPS Kicker Brace one size Replacement part for SAP60DWC SAPS Spider Anchor 6-24 H Guardrail anchor embed SAPS Toeboard 14 Inch 14 W x 14 D Toeboard attachment
SAPS DUALIE ANCHOR The SAPS Dualie Anchor embeds directly into a concrete slab. Available in 5 inch through 24 inch heights to match any slab depth. Use a SAPS guardrail along with a swivel d-ring on the ceiling below. The SAPS Dualie Anchor can also be embedded directly into a concrete wall and used with up to (2) swivel d-rings at the same time. 5000 lb tie-off anchor Embeds directly into concrete slab Dual point of tie-off SAPS Dualie Plug one size Replacement part SAPS Swivel D-Ring one size D-Ring 5000 lb point of tie-off SAP21D 2 0.5 H 21 Inch Guardrail with D-Ring 5000 lb point of tie-off SAP42D 3 9.5 H 42 Inch Guardrail with D-Ring 5000 lb point of tie-off SAP60D 5 3.5 H 60 Inch Guardrail with D-Ring 5000 lb point of tie-off
SAPS HANDRAIL CONCRETE - SIDE MOUNT Designed for limited space edge of deck concrete applications such as stairs, bridges and parapet or retaining walls. The SAPS side mount handrail bolts onto a preset embed to provide rigid support. The 60 inch model meets OSHA height requirements and provides 2 3/8 of space between the face of the wall and the post, allowing room for an edge of deck form. Made in the United States with heavy-duty steel, this guardrail system can be reused time over time. Rotatable rail member brackets with vise clamping Use with Flared Thin Slab Coil Insert SAP30HS 2 6 H 30 Inch Side Mount Handrail SAP60HS 5 H 60 Inch Side Mount Handrail Flared Thin Slab Coil Insert 3.5 H x 6 L Handrail anchor embed
SAPS GUARDRAIL STRUCTURAL STEEL CONSTRUCTION The SAPS guardrail for structural steel applications is surface mounted on a welded embed and provides a 5000 lb point of tie-off. The 42 inch model meets OSHA height requirements. Made in the United States with heavy-duty steel, this guardrail system can be reused time over time. Meets OSHA height requirements Use with SAPS Structural Steel Anchor SAPM42DW 3 9.5 H 42 Inch Structural Steel Guardrail with D-Ring SAPM42DWC 3 9.5 H 42 Inch Structural Steel Guardrail with D-Ring (Corner) SAPS Structural Steel Kicker Brace one size Replacement part for SAPM42DWC SAPS Structural Steel Anchor 2 H x 9.5 D x 9.5 W Guardrail welded embed (Call for custom sizes) SAPS Structural Steel Toeboard 3 H x 6 D x 3 W Toeboard attachment for SAPM42DW & SAPM42DWC