Cornered Ci2 FEATURES 2 1/2 woofer 3/4 dome tweeter Triangular ABS cabinet IP54 rated Mounts without brackets Hidden cable connection COLOURS Description DATA Ci2 is an ultra compact 2-way full-range speaker with a full-bodied sound. Featuring a tweeter with highly uniform dispersion, coverage is very wide and as such the speaker does not need to be angled, but will cover the entire room with sound while placed in the corner. The waveguide of the tweeter contributes to the very controlled dispersion and increases sensitivity. The cabinet design is exceptionally discreet while offering natural, clean sound. With the patented triangular Cornered design, installation is fast and easy. The integrated mounting points allows the cabinet to mount flush in corners or onto walls and ceilings without brackets. Two cabinets can be mounted together to increase coverage to 180 degrees. The cable terminal is hidden behind the grille with the cable mounted from the rear of the cabinet, making cables invisible both in vertical and horizontal applications. Ci2 plays well beyond its size and is very well suited for background sound in coffee shops, hotels and retail outlets. 102 mm 181 mm 85 mm 135 mm Power handling, IEC268: 30 watt Power handling, peak: 120 watt Sensitivity, 2,83V/1m: 84 db Maximum SPL, long term: 99 db Maximum SPL, peak: 105 db Frequency response: 140-20.000 Hz Nominal impedance: 8 ohm Dispersion: 100x100 degrees Measurements: (HxWxD) 181x135x102mm Weight: 0,75 kg Datasheet Ci2 page 01
Cornered Ci2 Architectural Specifications The loudspeaker system shall consist of a 2 ½ woofer and a ¾ tweeter coupled to a wave guide with an even dispersion of nominal 100 by 100 degree. FREQUENCY RESPONSE Specifications of a typical production shall be as follows: SPL at 1 m with 2.83 V input shall be at least 84 db. Nominal impedance shall be 8 ohms, with minimum impedance being 8 ohm @15 khz. Rated power handling according to IEC 268-5 shall be at least 30 watt. Frequency response shall be from 140-20kHz +/ - 3 db. The enclosure shall be triangular in shape with no visible cable terminals and with a 90 degree angle allowing the speaker to be mounted flush in corners or onto wall and ceiling without brackets using the integrated mounting points. It shall be manufactured of ABS plastic with EN54 fireproof certification and IP54 outdoor rating. For theft deterrence, the installation points shall be hidden behind the grille. Speaker cable terminals shall be push terminals placed on the front baffle. IMPEDANCE Cabinet finish shall be white or black. Outside dimensions shall be no greater than 181mm (height) x 135mm (width) x 102mm (depth) and weight shall be 0,75 kg. The loudspeaker system shall be the Cornered Audio Ci2. CORNERED Audio ApS Rosenkæret 13, 2. th. 2860 Søborg Denmark Mail info@cornered.dk Tel +45 43 66 10 88 Web www.cornered.dk Datasheet Ci2 page 02
Cornered Ci4 and Ci4-V FEATURES 4 woofer + 4 passive woofer 1 silk dome tweeter Triangular ABS cabinet IP54 rated Switchable limiting circuit for tweeter Mounts without brackets or with hidden sliders Hidden cable connection Ci4: 8 ohm Ci4-V: Switchable 100/70V mode/8 ohm mode COLOURS Description Ci4-V is a feature packed compact 2-way full-range speaker with medium output and full-range bass performance. The cabinet design is exceptionally discreet while offering great sound. With a wide and uniform dispersion, full coverage can be achieved by installing relatively few speakers, which makes the Ci4-V especially suited for in-door and outdoor commercial installations. The patented triangular Cornered design ensures fast and easy installation. The integrated mounting points allows the cabinet to mount flush in corners or onto walls and ceilings without brackets. Or for an even easier and more flexible installation - the cabinet can be mounted on two slider brackets. Cabinets can be coupled together to increase coverage to 180, 270 or 360 degree. The cable terminal is hidden behind the grille with the cable mounted from the rear of the cabinet, making the cable connection invisible both in vertical and horizontal applications. The tweeter features a switchable protection circuit for added safety and the Ci4-V model can be run in either 8 ohm or 70/100 volt. In high-impedance mode, tap settings for 3,5-7,5 or 15 watt output is conveniently located on the front baffle. Ci4-V is the perfect elegant speaker solution for back ground sound in commercial installations such as cafes, hotels and shops. DATA 145 mm 400 mm 130 mm 190 mm Power handling, IEC268: 60 watt Power handling, peak: 240 watt Sensitivity, 2,83V/1m: 86 db Maximum SPL, long term: 104 db Maximum SPL, peak: 110 db Frequency response: 70-20.000 Hz Nominal impedance: 8 ohm Dispersion: 100x100 degree Measurements: (HxWxD) 400x190x145mm Weight: 2,4 kg (Ci4 2,35 kg) Datasheet Ci4 and Ci4-V page 01
Cornered Ci4 and Ci4-V Architectural Specifications The loudspeaker system shall consist of a 4 woofer, a 4 passive woofer for extended bass performance and a 1 tweeter coupled to a wave guide with an even dispersion of nominal 100 by 100 degree. The tweeter shall be protected against damage from overpowering via a switchable limiting circuit that limits the power to the tweeter. FREQUENCY RESPONSE Specifications of a typical production shall be as follows: SPL at 1 m with 2.83 V input shall be at least 86 db. Nominal impedance shall be 8 ohms, with minimum impedance being 7 ohm @240 Hz. Rated power handling according to IEC 268-5 shall be at least 60 watt. Frequency response shall be from 70-20kHz +/ - 3 db. The enclosure shall be triangular in shape with no visible cable terminals and with a 90 degree angle allowing the speaker to be mounted flush in corners or onto wall and ceiling without brackets using the integrated mounting points or the integrated slider system. It shall be manufactured of ABS plastic with EN54 fireproof certification. The entire loudspeaker shall have IP54 outdoor rating. For theft deterrence, the installation points shall be hidden behind the grille. The input shall be switchable for use either at nominal 8 ohms, or on a 70V or 100V distributed speaker line via a built-in 15W transformer. Selectable taps shall allow operation at 7,5W, 15W from a 100V distributed speaker line, plus 3.75W, from a 70V line only. Speaker cable terminals shall be push terminals placed on the front baffle. Cabinet finish shall be white or black. Outside dimensions shall be no greater than 400mm (height) x 190mm (width) x 145mm (depth) and weight shall be 2,4 kg. The loudspeaker system shall be the Cornered Audio Ci4-V (or Ci4 without high impedance mode). IMPEDANCE CORNERED Audio ApS Rosenkæret 13, 2. th. 2860 Søborg Denmark Mail info@cornered.dk Tel +45 43 66 10 88 Web www.cornered.dk Datasheet Ci4 and Ci4-V page 02
Cornered Ci5 and Ci5-V FEATURES 5 ¼ woofer + 5 ¼ passive woofer 1 silk dome tweeter Triangular ABS cabinet IP54 rated Switchable limiting circuit for tweeter Mounts without brackets or with hidden sliders Hidden cable connection Ci5: 8 ohm Ci5-V: Switchable 100/70V mode/8 ohm mode COLOURS Description Ci5-V is a feature packed compact 2-way full-range speaker with medium output and solid full-range bass performance. The cabinet design is exceptionally discreet while offering true pro audio sound. With a wide and uniform dispersion, full coverage can be achieved by installing relatively few speakers, which makes the Ci5 especially suited for in-door and outdoor commercial installations. The patented triangular Cornered design ensures fast and easy installation. The integrated mounting points allows the cabinet to mount flush in corners or onto walls and ceilings without brackets. Or for an even easier and more flexible installation - the cabinet can be mounted on two slider brackets. Cabinets can be coupled together to increase coverage to 180, 270 or 360 degree. The cable terminal is hidden behind the grille with the cable mounted from the rear of the cabinet, making the cable connection invisible both in vertical and horizontal applications. The tweeter features a switchable protection circuit for added safety and the Ci5-V model can be run in either 8 ohm or 70/100 volt. In high-impedance mode, tap settings for 3,5-7,5-15 or 30 watt output is conveniently located on the front baffle. Ci5-V is the perfect elegant speaker solution for mid-sized commercial installations in bars, hotels and shops. DATA 150 mm 450 mm 139 mm 209 mm Power handling: IEC268: 80 watt Power handling: Peak: 320 watt Sensitivity: 2,83V/1m: 88 db Maximum SPL: Long term: 107 db Maximum SPL: Peak: 113 db Frequency response: 65-20.000 Hz Nominal impedance: 8 ohm Dispersion: 100x100 degree Measurements (HxWxD) 450x209x150mm Weight: 3,6 kg (Ci5 3,55 kg) Datasheet Ci5 and Ci5-V page 01
Cornered Ci5-V Architectural Specifications The loudspeaker system shall consist of a 5 ¼ woofer, a 5 ¼ passive woofer for extended bass performance and a 1 tweeter coupled to a wave guide with an even dispersion of nominal 100 by 100 degree. The tweeter shall be protected against damage from overpowering via a switchable limiting circuit that limits the power to the tweeter. FREQUENCY RESPONSE Specifications of a typical production shall be as follows: SPL at 1 m with 2.83 V input shall be at least 88 db. Nominal impedance shall be 8 ohms, with minimum impedance being 7 ohm @205 Hz. Rated power handling according to IEC 268-5 shall be at least 80 watt. Frequency response shall be from 70-20kHz +/ - 3 db and sensitivity shall be minimum 88 db @2,83V. The enclosure shall be triangular in shape with no visible cable terminals and with a 90 degree angle allowing the speaker to be mounted flush in corners or onto wall and ceiling without brackets using the integrated mounting points or the integrated slider system. It shall be manufactured of ABS plastic with EN54 fireproof certification. The entire loudspeaker shall have IP54 outdoor rating. For theft deterrence, the installation points shall be hidden behind the grille. The input shall be switchable for use either at nominal 8 ohms, or on a 70V or 100V distributed speaker line via a built-in 30W transformer. Selectable taps shall allow operation at 7,5W, 15W or 30W from a 100V distributed speaker line, plus 3.75W, from a 70V line only. Speaker cable terminals shall be push terminals placed on the front baffle. IMPEDANCE Cabinet finish shall be white or black. Outside dimensions shall be no greater than 450mm (height) x 209mm (width) x 150mm (depth) and weight shall be 3,6 kg. The loudspeaker system shall be the Cornered Audio Ci5-V (or Ci5 without high impedance mode). CORNERED Audio ApS Rosenkæret 13, 2. th. 2860 Søborg Denmark Mail info@cornered.dk Tel +45 43 66 10 88 Web www.cornered.dk Datasheet Ci5 and Ci5-V page 02