TM Precise Quality with Prompt service BOSON MACHINERY A Unit of Manufacturer & Exporter of Pharmaceutical Machineries
Our Range of Machineries include: Pharmaceuticals, Bulk Drugs, Fertilizer, Chemical, Food Roll Compactor TECHNICAL SPECIFICATIONS Model BMRC200/50 BMRC 200/75 BMRC 200/100 BMRC 200/150 BMRC 200/200 Output Kgs./Hr.* 20 to 60 75 to 100 100 to 250 100 to 350 150 to 400 Roll size Dia X Width mm Ø 200 x 50 Ø 200 x 75 Ø 200 x 100 Ø 200 x 150 Ø 200 x 200 Roll Speed - AC Drive 5 to 25 RPM 5 to 25 RPM 5 to 25 RPM 5 to 25 RPM 5 to 25 RPM Feed screw Speed AC Drive 10-60 RPM 10-60 RPM 10-60 RPM 10-60 RPM 10-60 RPM Roll drive Motor 5 Hp / 960 5 Hp / 960 5 Hp / 960 10 Hp. / 960 10 Hp. / 960 rpm / 3 Ph rpm / 3 Ph rpm / 3 Ph rpm / 3 Ph rpm / 3 Ph Feed Screw Drive motor 3 HP / 1440 3 HP/ 1440 3 HP / 1440 5 Hp. / 1440 5 Hp. / 1440 rpm / 3 Ph rpm / 3 Ph rpm / 3 Ph rpm / 3 Ph. rpm / 3 Ph SALIENT FEATURES Contact Parts SS-316 & Non Contact Parts SS-304 Material. Roll Surface Selection depends upon material characteristics Roll Type Corrugated / Plain / Knurled / Briquetted (Any One ) Very compact design available in Plain, Water Jacketed or Flameproof Model. Screw is driven through ACVF Drive. Safety slipping clutch between gearbox and feed screw. Rolls drive through twins shaft gearbox with speed drive unit coupled to it using coupling, which ensures synchronization of the rolls with a steady torque loading. Pre-densifier screw comprises of cylindrical or conical shape, which is well polished and made of AISI SS-316 quality material. Compacting rolls sleeves are made out of tool steel, hardened to 55 HRC approximately, and are keyed in to shafts and thus protected against axial slipping by thrust plates and bolts. The feed screw assembly can be lifted by hand-operated hydraulic pump. This facilitates ease in cleaning. Scrapper assembly also designed to dismantle for ease of cleaning. Pre-compression chamber guides the powder without any slippage or leakage. A separate panel board which consist all controls and indicators of the compactor are permanently built in namely, on/off rolls, on/off feed screw, main switch, forward/reverse switch, ammeters for rolls and feed screw and emergency stop to avoid short circuit or fire hazard at the time of cleaning with water. Out Put Depending on the material characteristics.
Our Range of Machineries include: Pharmaceuticals, Bulk Drugs, Fertilizer, Chemical, Food Mass Mixer cgmp Model BMM 50 BMM 100 BMM 150 BMM 200 Capacity 50 Kgs. 100 Kgs. 150 Kgs. 200 Kgs. Over flow capacity 110 Ltrs. 220 Ltrs. 330 Ltrs. 440 Ltrs. Working capacity 88 Ltrs. 156 Ltrs. 234 Ltrs. 309 Ltrs. Speed of stirrer 35 RPM 35 RPM 30 RPM 30 RPM Main Electric Motor 3 HP / 3 Ph. 5 HP / 3 Ph. 7.5 HP / 3 Ph. 7.5 HP / 3 Ph. All contact parts are made of SS 316. Thrust bearings are provided to carry rigid and thrust load. Easy for cleaning and operating. Interlocked acrylic dust cover for inspecting the mixing process. The tilting device provided for easy unloading of the material. Available model 300Kg., 500Kg.,1000Kg. Octagonal Blender cgmp Gross Working Motor RPM Volume Volume (HP) (Ltr.) (Ltr.) 15 13 0.5 12 25 20 0.5 12 50 40 0.5 12 125 100 0.5 8 250 200 1 8 375 300 1.5 5-10 500 400 2 5-10 Salient Features of Double Cone Blenders: Suitable for rapid mixing of all types of free flowing powders and granules. The uniform, multidimensional offset arrangement of the cone ensures good mixing It is made from high quality stainless steel to prevent from rust & corrosion. It is easy to load and discharge materials in double cone mixer as its servers as excellent batch mixer machine. Provision is made for steam, chemicals, and hot water arrangements as required by customer. Available in all capacities ranging from 500 liters to 4000 liters. Chain drive arrangement provides minimum slippage and maximize load bearing capacity. Double Cone Blender cgmp Model Gross Working Motor Volume Volume HP (Ltr) Ltrs. BM-DCB-5 15 9 0.5 BM-DCB-10 30 18 0.5 BM-DCB-15 45 27 0.5 BM-DCB-25 75 45 1 BM-DCB-50 150 90 2 BM-DCB-100 300 180 3 BM-DCB-150 450 270 3 BM-DCB-200 600 360 5 BM-DCB-250 750 450 5 BM-DCB-300 900 540 7.5 BM-DCB-350 1050 630 7.5 BM-DCB-400 1200 720 10 BM-DCB-500 1500 900 10 Ribbon Mixer cgmp The shape of container and mixing stirrer gives sufficient contineous movement to the powder / granules, result in good quality. All contact parts are made of SS316. Full cover on top side of the container. Discharge height must be adjusted, if confirm with order. Operating panel provided for safe operation of blender. Centrally located material Discharge valve. ( Butter fly / Sliding Valve ) Safety Guards & Covers made out of SS304 in GMP Model. Legs made of Model SS304 in GMP Model. Panel provided with following facilities in 500 Liters & bigger model. In Small model only D.O.L. starter provided for On-Off operation of the motor. Limit switch provided at top cover for safety purpose.
Our Range of Machineries include: Pharmaceuticals, Bulk Drugs, Fertilizer, Chemical, Food Oscillating Granulator cgmp Model Available from Single Stiral & Double Stiral Model BMOG - 200 Hopper capacity 33 Liters Screen area 388 mm (W) x 762 mm (L) Stirrer size Ø 138 mm x 368 mm Length Oscillation 110 Per Minute. Output * 30 to 200 Kgs./Hr. Charging height 1135 + 5 mm Discharging height 655 + 5 mm Main Electric Motor 1 HP / 1440 RPM / 3 Ph. * Varies according to product characteristic & and screen type. Sturdy and noiseless design. Easy to operate & maintain. Higher ratio of desired size granules can be obtained Continuous oscillating stirrer drive. Simple screen holding and tensioning device. Multi Mill cgmp BMMM - 200 750 / 1500 / 2300 / 2800 RPM Comminuting Mill cgmp Model BMCM - 300 Rotor speed Output * Main Electrical Motor 1000 / 2250 / 4500 RPM 25-300 Kgs. / Hr. 7.5 HP / 1440 RPM / 3 Ph. *Varies according to product characteristic, rotor speed and screen type. Designed to suit high speed milling needs with plain, water jacketed. Contact parts made of SS316 & Non contact parts made of SS304. Beater assembly bearings are housed in separate pillow blocks for ease in maintenance. Dynamically balanced fixed beater assembly as standard supply. Minimum downtime required to change direction. Fabricated to work long with very low heat, vibration & noise generation. Castors provided for mobility. Vibro Sifter cgmp Model BMS 20 BMS 30 BMS 36 BMS 48" Screen Dia. 503 mm. 752 mm. 914 mm. Capacity/Hour 20 to 200 Kgs. 30 to 300 Kgs. 30 to 325 Kgs. Charging height 1200 mm without Lid 1050 mm without Lid 1050 mm without Lid Discharging height 720 mm. 670 mm. 670 mm. Main Electric Motor 0.25 HP 0.5 HP 1 HP *Varies according to product characteristic and screen type. Compact vibratory design for high speed & dust free sieving. Noiseless and maintenance free machine. All contact parts and screen made of SS 316. Low power consumption compared to reciprocating vibratory system. Easy dismantling and cleaning of contact parts. Machine available with flame proof and Double Deck & Triple Deck (optional) 1200 mm 200 to 400 kgs. 1340 mm 850 mm 1.5 HP
Our Range of Machineries include: Pharmaceuticals, Bulk Drugs, Fertilizer, Chemical, Food Fluid Bed Dryer *Batch Size depends upon the product Bulk Density. (above@o.5 grams / cc) **The Blower motor of higher capacity will require in machine supplied with Hepa filter. ***Electric Heater provided up to 60kg max without FLP machine. Rapid Mixer Granulator Specifications BMRMG-150 BMRMG-250 BMRMG-400 BMRMG-600 Gross Capacity (Ltr) 150 250 400 600 Net Capacity (Ltr) 120 200 320 480 Mixer Motor 10/15 HP 22.5/30 HP 30/40 HP 40/50 HP Granulator Motor 3/5 HP 3/5 HP 5/7.5 HP 7.5/10 HP Over all Dimension L x W x H (mm) 2400 x 2100 x 2000 2700 x 2200 x 2100 2800 x 2400 x 2150 2950 x 2500 x 2200 Net Weight (kg) 1600 1800 2400 3000 Salient Features Excellent Mixing Consistent Granulation Higher Productivity Safe Operation MODEL BMFBD-30 BMFBD-60 BMFBD-120 BMFBD-200 BMFBD-300 Product Container Volume (ltrs) 71 142 288 475 650 Batch Size (kg)* Min / Mix. 25 to 35 50 to 70 100 to 120 180 to 200 270 to 300 Blower Motor HP** 5 HP 10 HP 15 HP 20 HP 30 HP Air Flow (CFM) 706 1059 1882 3235 5588 Electric Heater(kw)*** 18 36 ( STEAM HEATING ) Compressed air Pressure(bar) 6 bar Drying Temperature 35O to 80OC Power 3 PH 415V & 50Hz Easy Thorough Cleaning Facility Improves Product Quality Lowers Operating Cost. Construction as per GMP standards. All contact parts in SS 316. Closed Temperature control for consistency of process. Explosion relief vent to withstand up to 2 bar pressure. Pneumatic Shaking for filter bags & Pneumatic bowl lifting air control damper at inlet & outlet for consistent & controlled fluidzation pattern. Tray Dryer Machine (24/48/96 Tray) CABINET: Made of SS 316 / SS 304 inside S.S.18 SWG SS-304 16 SWG outside with thick S.S. sheet insulated with 75-mm glass wool insulation. Chamber Provided with single door with Heavy-duty hinges and locked with the help of spring loaded ball latch with suitable locking pressure. TRAYS & TROLLEY: Fabricated from SS 316 / SS 304 sheet Having Size: 16 x 32 x 1¼. 1NO Trolley Fabricated from 25mm. square pipe of S.S. 316 Vertically & 25mm. angle guides of SS 304. and Provided With two nos. of revolving wheel & two nos. of fixed castor wheels STEAM CIRCULATION: Fabricated from SS-304 pipes, Radiator with S. S. fins. Fitted with 20-micron air filter & suction chamber. IMPELLOR: SS-316 with S.S. bush to attain uniform air circulation in the chamber with dampers to control air flow. SAFETY WINDOW: 1 x 1 on backside. CONTROL PANEL: Digital control panel with PT-100 sensor & digital controller, MCP, RYB, Relay, contactors, etc Coating Pan Machine cgmp De-Burring & De-Dusting Machine cgmp Dust Extractor Machine cgmp
Our Range of Machineries include: Pharmaceuticals, Cosmetic, Agrochemical, Food & Beverage, Oil-Edible & Lube Air Jet Cleaning Machine Bottle Washing Machine Model BMWM-64 BMWM-96 Out put / Hour* 2600 to 6000 4300 to 9000 No. of Container Holder 64 96 Direction of Machine Clock wise Electric Specifications Main Motor 0.5 HP / 415 Volts / 50 Hz Pump (2 Nos.) 1 HP / 415 Volts / 50 Hz X 2 Nos. Electric Heaters 3 kw. Tank Capacity 75 Ltrs. S.S. 316 (2 Nos.) Wash Cycle 4 Inner+1 Outer Working Height Change parts required Washing Filling Capping Labeling Inspection 860 mm ± 50 mm (1) Neck Dia.: Neck holding pocket (2) Flat Containers : Special type of cups Bottle Liquid Filling Machine Model BMLF-50 BMLF-100 BMLF-150 BMLF-200 Output PerHour 1200 to 3000 2400 to 6000 3600 to 9000 5000 to 12000 Direction of Movement Left to Right Number of head/syringe 2 Nos. 4 Nos. 6 Nos. 8 Nos. Fill Size 5 ml to 1000 ml Main Motor 1 HP / 415 Volts / 50 Hz. (1.5 HP for 1000 ml filling) 2 HP Conveyor Motor 0.5 HP / 415 Volts / 50 Hz. Height of Conveyor 860 mm ± 50 mm Adjustable. Change parts required (A) Syringes, (B) Nozzle, (C) Inlet & outlet hose pipe. Bottle Capping Machine Model BMCS 100 BMCS 150 BMCS200 No. of sealing head 4 6 8 Output / Hour * 3600 to 6000 3600 to 9000 4000 to 12000 Direction of Movement Left to Right Electric Specifications Main Motor 1.5 HP / 415 Volts / 50 Hz. 2 HP / 415 Volts / 50 Hz. Cap Feeding Bowl 0.25 HP / 415 Volts / 50 Hz. Height of Conveyor 860 ± 50 mm Change parts required (A) Container: Star Wheel, Center guide, Feed Worm (B) Cap: Die & Delivery Chute Bottle Labeling Machine Model BML-150 Direction of Movement Left to Right Output/Hour* 3600 to 9000 Electric Specifications Main Motor 0.75 HP/415 Volts/ 50 Hz Vacuum Pump 0.5 HP/ 415 Volts/ 50 Hz Height of Conveyor 860 ± 50 mm Change parts required (A) Container: Feed Worm (B) Label: Label Muster, Upper-Lower Plates, Pusher Plate
Our Range of Machineries include: Pharmaceuticals, Cosmetic, Agrochemical, Food & Beverage, Oil-Edible & Lube Washing Filling Capping Labeling Inspection Bottle Inspection Machine Model BMBI-100 BMBI-150 BMBI-200 Direction of Movement Left to Right Output / Minute* Up to 100 Up to 150 Up to 220 Number of operator Four (2 x 2, Two Six (3 x 2, Two Six (4 x 2, Two side seated) side seated) side seated) Electric Specifications 0.5 HP/220 V/50 Hz Height of Conveyor 860 ± 50 mm Bottle Turn Table Machine Model BTT-36 BTT 30 BTT-42 Direction Clockwise / Anti clock wise as per requirement RPM of Disk Through ACVFD Electric Specifications 0.5 HP/220 V/50 Hz Height of Table 860 ± 50 mm Colloid Mill cgmp (Model Available from 15 Ltr to 35 Ltr) Model BMCM - 15 Output * 150 to 1500 Liters. Particle size reduction * 5 to 15 Microns. Hopper capacity 15 Liters Main Electrical Motor 3 HP / 2850 RPM / 3 Ph. * Depending upon material characteristics viscosity, density & micron size. R&D Model Available on Customer Demand. Totally leak proof design. Unique for small volume micronization. Modified design of stator-rotor assembly. Available in plain, water jacketed & flame proof options. Easy to dismantle for cleaning and maintenance. Filter Press Triple Roller Mill Machine Kharal / Edge Runner Capsule Filling 300
Tracks & Upper Cam Disc Sifter Sieves Worm & Feed Frame Multi Mill & Granulator Sieves Tube Filling Turret & Variable Speed Pully Die Punch Cabinet BOSON TECHNOLOGY Let s Learn More... BOSON AGARBATTI BOSON MACHINERY A Unit of Manufacturer & Exporter of Pharmaceutical Machineries Regd. Office: B4/51, Alok-5, Nr. Arpan School, Nirant 4 ways Cross Road, Vastral, Ahmedabad. (Guj.) INDIA. Phone: +91 79 22893649 Cell: +91 9727466622 E-mail: sales@bosonmachinery.com, exports@bosonmachinery.com Website: Works: Plot-12-A, Jaylaxmi Indl. Estate, Nr. Anup Eng. Road, Soni Ki Chal, Odhav, Ahmedabad-382415 USA Branch: First Empire Group, Warren NJ-07059, Phone: 732-369-6626, exports@bosonmachinery.com