STARTER SHELVING UNITS DOCUMENT HOLDER LEDGES

Nexel 24428Z5 Item #101 STARTER SHELVING UNITS Starter Unit consists of 4 posts, 4 shelves and plastic shelf clips in the height and shelf size indicated. Select from 4 shelf or 5 shelf units in choice of finishes: Poly-Z-Brite, Chrome or Nexelon. SHELF DIVIDERS Installs easily without the use of bolts, nuts or clips. Attaches at any point along shelf. 8" high. Chrome finish. DOCUMENT HOLDER Hooks onto wire shelf in any location. Chrome finish. 12 3 /8" x 2" x 8 5 /8". Size" Model No. 14 AD814C 18 AD818C 21 AD821C 24 AD824C 30 AD834C 36 AD830C UTILITY BASKET Organizes files and manuals. Open mesh design provides high visibility. Chrome finish. 17 3 /8" x 7 1 /2" x 10". Model No. AH LEDGES Model No. ASW177 Snaps onto perimeter of shelf providing 4"H retaining ledge. If higher ledge is required, stack for 8", 12", etc. Chrome finish. Model No. 18366N NSF Size" Model No. 14 AL414C 18 AL418C 21 AL421C 24 AL424C 30 AL430C 36 AL436C Size" Model No. 42 AL442C 48 AL448C 54 AL454C 60 AL460C 72 AL472C 4 SHELVES - 63"H 4 SHELVES - 74"H 4 SHELVES - 86"H Size CHROME CHROME CHROME W" x L" Model No. Model No. Model No. Model No. Model No. Model No. Model No. Model No. Model No. 18 x 24 18246Z 18246C 18246N 18247Z 18247C 18247N 18248Z 18248C 18248N 18 x 30 18306Z 18306C 18306N 18307Z 18307C 18307N 18308Z 18308C 18308N 18 x 36 18366Z 18366C 18366N 18367Z 18367C 18367N 18368Z 18368C 18368N 18 x 42 18426Z 18426C 18426N 18427Z 18427C 18427N 18428Z 18428C 18428N 18 x 48 18486Z 18486C 18486N 18487Z 18487C 18487N 18488Z 18488C 18488N 18 x 54 18546Z 18546C 18546N 18547Z 18547C 18547N 18548Z 18548C 18548N 18 x 60 18606Z 18606C 18606N 18607Z 18607C 18607N 18608Z 18608C 18608N 18 x 72 18726Z 18726C 18726N 18727Z 18727C 18727N 18728Z 18728C 18728N 21 x 24 21246Z 21246C 21246N 21247Z 21247C 21247N 21248Z 21248C 21248N 21 x 30 21306Z 21306C 21306N 21307Z 21307C 21307N 21308Z 21308C 21308N 21 x 36 21366Z 21366C 21366N 21367Z 21367C 21367N 21368Z 21368C 21368N 21 x 42 21426Z 21426C 21426N 21427Z 21427C 21427N 21428Z 21428C 21428N 21 x 48 21486Z 21486C 21486N 21487Z 21487C 21487N 21488Z 21488C 21488N 21 x 54 21546Z 21546C 21546N 21547Z 21547C 21547N 21548Z 21548C 21548N 21 x 60 21606Z 21606C 21606N 21607Z 21607C 21607N 21608Z 21608C 21608N 21 x 72 21726Z 21726C 21726N 21727Z 21727C 21727N 21728Z 21728C 21728N 24 x 24 24246Z 24246C 24246N 24247Z 24247C 24247N 24248Z 24248C 24248N 24 x 30 24306Z 24306C 24306N 24307Z 24307C 24307N 24308Z 24308C 24308N 24 x 36 24366Z 24366C 24366N 24367Z 24367C 24367N 24368Z 24368C 24368N 24 x 42 24426Z 24426C 24426N 24427Z 24427C 24427N 24428Z 24428C 24428N 24 x 48 24486Z 24486C 24486N 24487Z 24487C 24487N 24488Z 24488C 24488N 24 x 54 24546Z 24546C 24546N 24547Z 24547C 24547N 24548Z 24548C 24548N 24 x 60 24606Z 24606C 24606N 24607Z 24607C 24607N 24608Z 24608C 24608N 24 x 72 24726Z 24726C 24726N 24727Z 24727C 24727N 24728Z 24728C 24728N NOTE: FOR 5 SHELF UNITS PLEASE CONSULT YOUR NEXEL PRICE LIST. 6 Nexel Industries Inc. Nexelwire.com Palm Beach Tennis Second Floor Profitable Food Facili es Page: 1

Advance Tabco WS 15 60 Item #102 STAINLESS STEEL WALL SHELVES Item #: Qty #: Model #: Project #: FEATURES: Brackets can be positioned to accommodate wall studs. Furnished with a 1-5/8 Bullnose edge with a 1-1/2 turn-up edge at rear. Ends are turned down square. MATERIAL: 16 Gauge Series - 304 stainless steel polished to a satin finish. 18 Gauge Series - 430 stainless steel polished to a satin finish. CONSTRUCTION: Secured to wall by means of bolts through support brackets. Units 7 ft. and larger are furnished with 3 brackets. 10 Wide 12 Wide 15 Wide 18 Wide L 16 Ga. 18 Ga. Approx. Wt. 16 Ga. 18 Ga. Approx. Wt. 16 Ga. 18 Ga. Approx. Wt. 16 Ga. 18 Ga. 24 WS-10-24-16 WS-10-24 8 lbs. WS-12-24-16 WS-12-24 9 lbs. WS-15-24-16 WS-15-24 11 lbs. WS-18-24-16 WS-18-24 14 lbs. 3 36 WS-10-36-16 WS-10-36 10 lbs. WS-12-36-16 WS-12-36 12 lbs. WS-15-36-16 WS-15-36 15 lbs. WS-18-36-16 WS-18-36 21 lbs. 4 48 WS-10-48-16 WS-10-48 12 lbs. WS-12-48-16 WS-12-48 14 lbs. WS-15-48-16 WS-15-48 18 lbs. WS-18-48-16 WS-18-48 24 lbs. 5 60 WS-10-60-16 WS-10-60 15 lbs. WS-12-60-16 WS-12-60 17 lbs. WS-15-60-16 WS-15-60 23 lbs. WS-18-60-16 WS-18-60 28 lbs. 6 72 WS-10-72-16 WS-10-72 17 lbs. WS-12-72-16 WS-12-72 21 lbs. WS-15-72-16 WS-15-72 28 lbs. WS-18-72-16 WS-18-72 32 lbs. 7 84 WS-10-84-16 WS-10-84 20 lbs. WS-12-84-16 WS-12-84 25 lbs. WS-15-84-16 WS-15-84 32 lbs. WS-18-84-16 WS-18-84 36 lbs. 8 96 WS-10-96-16 WS-10-96 23 lbs. WS-12-96-16 WS-12-96 28 lbs. WS-15-96-16 WS-15-96 36 lbs. WS-18-96-16 WS-18-96 42 lbs. 10 108 WS-10-108-16 WS-10-108 28 lbs. WS-12-108-16 WS-12-108 32 lbs. WS-15-108-16 WS-15-108 40 lbs. WS-18-108-16 WS-18-108 48 lbs. 11 120 WS-10-120-16 WS-10-120 32 lbs. WS-12-120-16 WS-12-120 36 lbs. WS-15-120-16 WS-15-120 44 lbs. WS-18-120-16 WS-18-120 54 lbs. 12 132 WS-10-132-16 WS-10-132 36 lbs. WS-12-132-16 WS-12-132 42 lbs. WS-15-132-16 WS-15-132 49 lbs. WS-18-132-16 WS-18-132 60 lbs. 13 144 WS-10-144-16 WS-10-144 40 lbs. WS-12-144-16 WS-12-144 48 lbs. WS-15-144-16 WS-15-144 55 lbs. WS-18-144-16 WS-18-144 66 lbs. 14 Approx. Wt. Approx. Cu. Ft. www.advancetabco.com Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T. For Orders & Customer Service: Email: customer@advancetabco.com or Fax: 631-242-6900 For Smart Fabrication Quotes: Email: smartfab@advancetabco.com or Fax: 631-586-2933 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 2 REF-L

TOL ±.500 Advance Tabco WS 15 60 Item #102 DETAILS and SPECIFICATIONS ALL DIMENSIONS ARE TYPICAL Width 10 12 15 18 A 8 1/2 10 1/2 13 1/2 16 1/2 Wall Shelf Options PRT-1... Printer Shelf TA-22A... Square Edge Shelf TA-26... Welded Shelf Brackets TA-49... Wall Shelf 2 Offset TA-71... Heat Lamp Provision TA-77... Check Minder TA-77A... Concealer for Heat Lamp (Requires TA-77) TA-99A... 14 Ga. S/S 304 Upgrade for Overshelves TA-100A... Bullnose Edge On All 4 Sides of Shelf TA-102... 6 Cantilever Shelf Offset TA-49 Wall Shelf Offset 2" WALL PRT-1 Requirements for NSF Installations 1. Install at least 60 above floor. 2. Limit to dry storage. 3. Avoid contact with liquids. 4. For Ganging-Up installation, allow at least 2 between units or mount units side by side and seal joints with an approved sealant. REF-L 200 Heartland Boulevard, Edgewood, NY 11717-8380 ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, DECEMBER 2016 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 3

Advance Tabco DT 6R 12 Item #103 DISHTABLE SORTING SHELVES Item #: Qty #: Model #: Project #: TRADITIONAL DESIGN FEATURES: A solid die formed wall mounted rack shelf with solid end brackets. CONSTRUCTION: TIG-welded with exposed areas blended to a satin finish. MATERIAL: Brackets are 16 gauge type 300 series stainless steel. Shelf is 16 gauge type 300 series stainless steel. MODEL # DT-6R-11 DT-6R-12 DT-6R-13 DT-6R-14 # of Racks 1 2 3 4 L 22 42 62 82 Wt 20 lbs. 30 lbs. 40 lbs. 50 lbs. KD TUBULAR DESIGN FEATURES: A dual purpose open tubular design wall mounted rack shelf with solid end brackets bolted in field. Unit completely knock down. CONSTRUCTION: No welds. Unit is supplied with assembly hardware. MATERIAL: Brackets are 16 gauge type 300 series stainless steel. Tubing is 1 5/8 diameter stainless steel 18 gauge tubing. Stainless steel bolts (included). MODEL # DT-6R-21 DT-6R-22 DT-6R-23 DT-6R-24 # of Racks L Wt 1 2 3 4 22 42 62 82 15 lbs. 23 lbs. 30 lbs. 38 lbs. Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T. Email Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933 www.advancetabco.com NEW YORK GEORGIA TEXAS NEVADA Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 4 Q-3

Advance Tabco DT 6R 12 Item #103 DTA-79 DISHTABLE RACK SHELF & UNDERSHELVES Recommended for D, G and U-Shaped Series Dishtables Only. OPTION 1: Lower Angle (Racks cannot be back to back) OPTION 2: Higher Angle For back to back storage (For maximum rack storage) TABLE MOUNTED TUBULAR, DOUBLE SIDED DESIGN Mounts to backsplash and end roll of dishtable FEATURES: A dual purpose double sided open tubular design table mounted rack shelf with solid end plates. CONSTRUCTION: All stainless steel posts, cross-tubes & end plates. Mounts to dishtable with stainless steel bolts Ships Knocked Down*. Easily assembles with simple tool. MATERIAL: End Plates are 14 gauge type 304 series stainless steel. Tubing is 1 5/8 diameter 18 gauge type 300 stainless steel tubing. CENTER SUPPORT PROVIDED FOR 9 AND LONGER SHELVES Shelf shipped separated from table to reduce freight costs and chance of shipping damage. Center support can be positioned to accommodate rack size. MODEL # DTA-79 Qty. Per Linear Foot. Minimum Length 48 *May ship pre-assembled from factory where special applications exist When using DTA-79 as a pass-thru for a glass rack, use OPTION 2 (see above). This will allow the rack to pass through the middle (10 Clearance). 27" 13" 15" O.C. 17" + + + L 10" 1 5/8 S/S Tubing Rolled Rim Back Splash + 10" 20" STAINLESS STEEL UNDERSHELVES FEATURES: Stainless steel construction featuring the adjustable die cast leg clamp. CONSTRUCTION: No welds. Shelf completely die formed. MATERIAL: Stainless steel. MODEL # L MODEL # DTA-SS-18 DTA-SS-24 DTA-SS-30 DTA-SS-42 DTA-SS-54 DTA-SS-66 18 24 30 42 54 66 Wt. 11 lbs. 13 lbs. 15 lbs. 20 lbs. 23 lbs. 30 lbs. DTA-SS-78 DTA-SS-90 DTA-SS-102 DTA-SS-114 DTA-SS-126 DTA-SS-138 Wt. 78 L 35 lbs. 90 39 lbs. 102 45 lbs. 114 50 lbs. 126 55 lbs. 138 59 lbs. Size Undershelf to be at least 6 shorter than dishtable. ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. Q-3a 200 Heartland Boulevard, Edgewood, NY 11717-8380 ADVANCE TABCO, SEPTEMBER 2016 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 5

Advance Tabco CUSTOM Item #104 Description: Sink, (3) Three Compartment Notes: Palm Beach Tennis Second Floor Prof itable Food Facilit ies Page: 6

Advance Tabco 94 K6 18D Item #104 STAINLESS STEEL REGALINE CORNER SINKS NEW Tile Edge Design Item #: Qty #: Model #: Project #: All units furnished with 2 integral drainboards Optional Poly-Vance Cutting Boards Available FEATURES: Tile edge for ease of installation. One piece Deep Drawn sink bowls with integral drainboards with splash. Featuring the single bowl unit design. All sink bowls have a large liberal 3 radius (10 x14 bowls have 2 Radius). Placement of the welded leg assembly ensures stability and furnishes direct support of the column load requirement for the entire sink unit. CONSTRUCTION: All TIG welded. Welded areas blended to match adjacent surfaces and to a satin finish. Gussets welded to a die-embossed reinforcing channel. MATERIAL: Unit is 16 gauge, type 304 stainless steel. Legs are 1 5/8 diameter heavy gauge tubular stainless steel with stainless steel gussets. 1 adjustable stainless steel bullet feet. YES! It's SeaM ess! MODEL # # of Comp. Wall Dimension Optional Poly-Vance Cutting Board 94-K2-24D 94-K4-24D 94-K5-18D 94-K6-18D 94-K8-30D 94-K3-11D 94-K5-11D 3 3 4 3 3 3 3 71 x 71 79 x 79 79 1/2 x 61 61 x 61 85 x 85 54 x 54 42 x 42 K-2E K-2F K-2E K-2E K-2E K-2H K-2H ACCESSORIES Model # Qty FAUCETS All Units Require 2 Sets of Faucets www.advancetabco.com Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T. Email Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933 NEW YORK GEORGIA TEXAS NEVADA Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 7 D-2

TOL Overall: ±.500 Interior: ±.250 Advance Tabco 94 K6 18D Item #104 DIMENSIONS and SPECIFICATIONS ALL DIMENSIONS ARE TYPICAL 94-K2-24D 94-K5-18D 94-K6-18D 94-K4-24D 94-K8-30D 94-K3-11D MECHANICAL: Supply is 1/2 IPS hot & cold. Faucet holes on 8 centers. Faucets are not included (see accessories). Waste drains are 1 1/2 IPS S/S basket type, located in center of sink bowl, and are included. 94-K5-11D PLUMBING ROUGH-IN SECTION Model # A B C D E Y 94-K2-24D 94-K4-24D 94-K5-18D 94-K6-18D 94-K8-30D 94-K3-11D 94-K5-11D 15 15 15 15 15 15 13 12 12 12 12 12 10 27 20 31 24 27 20 27 20 27 20 21 14 21 14 13 5/8 15 5/8 13 5/8 13 5/8 13 5/8 10 5/8 10 5/8 22 22 22 22 22 22 24 D-2a 200 Heartland Boulevard, Edgewood, NY 11717-8380 ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, MARCH 2014 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 8

Advance Tabco K 101 Item #104 K-101 8 SWING SPOUT SPLASH MOUNT FAUCET Meets All Federal Lead Free Standards Item #: Qty #: Model #: Project #: FAUCET AERATOR CONFORM TO ASTM.A112.18.1M 1.0 GPM/3.8 LP THREAD: 55/64-27 FEMALE Click This Link To View Assembly Sheet FEATURES: 8 swing spout. 8 O.C. water supply. Quarter-turn wedge style handles. Colored hot & cold Indexes. 1.0 GPM/3.8 LPM Aerator. 60 PSI. MATERIAL: Brass chrome plated body & spout. Chrome plated handles. Replacement Spout For K-101 Faucet Options & Accessories Wrist Handles For Existing K-101 Faucet 8 Swing Spout. * Can Only Be Used On Faucets Purchased After January 2016. For Older Faucets, Consult Customer Service. K-101SP K-416-LUHA (Set of 2) Replacement Cartridges For K-101 Faucet * Can Only Be Used On Faucets Purchased After January 2016. For Older Faucets, Consult Customer Service. K-00HB (Set of 2) Splash Mount Faucet Mounting Kit K-06 DIMENSIONS and SPECIFICATIONS D A C C L B A Length B Height C D On Center Dimensions 8 4 1/4 2 1/4 10 8 O.C. C L www.advancetabco.com Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T. For Orders & Customer Service: Email: customer@advancetabco.com or Fax: 631-242-6900 For Smart Fabrication Quotes: Email: smartfab@advancetabco.com or Fax: 631-586-2933 ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, JULY 2017 REF-G Palm Beach Tennis Second Floor Profitable Food Facili es Page: 9

Advance Tabco K 5 Item #104 SINK DRAINS & ACCESSORIES Twist Handle Operated Drain Twist Handle Operated Drain With Overflow K-5 K-15 Lever Operated Drains For Hand Sinks SPEC-LINE Twist Handle Operated Drain All Stainless Steel with Overflow No Overflow K-26 K-67 K-40 3-1/2 Basket Drain Replacement Drain Basket For K-6 2 Drain with Strainer Plate Replacement O Rings For Twist Handle Drains (For K-5 & K-15 Drains) Stopper Washer Twist Handle Washer K-6 K-310 K-63 K-05 Twist Drain Support Bracket Replacement Strainer For 3-1/2 Drains Replacement Strainer For 2 Drains Replacement Washers For 3-1/2 Drains (Set of 2) K-4 K-410 K-411 K-67F www.advancetabco.com Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T. For Orders & Customer Service: Email: customer@advancetabco.com or Fax: 631-242-6900 For Smart Fabrication Quotes: Email: smartfab@advancetabco.com or Fax: 631-586-2933 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 10 G-5

Advance Tabco K 5 Item #104 DIMENSIONS and SPECIFICATIONS TOL ±.125 ALL DIMENSIONS ARE TYPICAL S/S Basket Strainer S/S Strainer Plate Metal Post S/S Locking Ring Rubber Washer 4 1/2" S/S Drain Body Fiber Washer 2 1/4" 1 1/2" NPS Rubber Washer Stainless Steel Handle with Plastic Knob 4 5/16" End Cap 4 1/2" Brass Nut Fiber Washer Zinc Locking Nut Plastic Washer 12" Standard Washer 2" NPT Extended Thread K-6 K-5 S/S Strainer Plate S/S Locking Ring Rubber Washer Fiber Washer less Steel Handle with Plastic Knob K-15 4 1/2" 12" Standard 4 5/16" Overflow Head 1 1/4" Chrome Overflow Pipe Lock Nut & Washer 2" NPT Extended Thread Plastic Overflow Head Assembly Metal Clamp S/S Strainer Plate Rubber Overflow Tube 2 1/4" Metal Clamp 4 1/2" Tail Piece W/ Overflow Connection O-Ring Plastic Plunger S/S Drain Body 1 1/2" NPS Rubber Washer Fiber Washer Zinc Locking Nut Plastic Washer Chrome Nut Locking Ring Plastic Washer K-26 & K-67 For Hand Sinks (K-67 Excludes Overflow) Plastic Knob S/S Basket Strainer S/S Drain Body 4 1/2" O-Ring S/S Locking Ring S/S Locknut Plastic Knob 4 3/16" K-40 1 1/4" S/S Cap Nut Rubber Washer 2" NPT External Thread Plastic Bushing S/S Washer 1 1/2" FPT Internal Thread 12" Rubber Washer Plastic Washer S/S Locking Nut S/S Handle ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. G-5a 200 Heartland Boulevard, Edgewood, NY 11717-8380 ADVANCE TABCO, JANUARY 2018 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 11

Advance Tabco K 455C Item #104 SINK MODIFICATIONS & ACCESSORIES K-499 K-480 K-37 Anti-Siphon Vacuum Braker Holes K-72 Leg-To-Wall Brace K-500 K-440 K-610 K-460A Disposal Cone w/ Control Bracket & Faucet Holes K-461A Install Collar w/ Control Bracket K-494 K-550 MODIFICATIONS K-4 Support Bracket for Lever Waste Drain Handle K-23Welded Set-Up/Crated K-24 Shell Crating K-37 Anti-Siphon Vacuum Breaker Holes K-57 Welded field Joint (Welded in field by others) K-76 Paint on Sound Deadening K-77 Splash Cutout (Pipe Chase) K-106 Mirror Highlite Edge for Sink K-440 Waste Trough with 2 deep removable basket K-447 High Backsplash up to 18 K-448 High Backsplash up to 13 K-450 Extra Drainboard K-451 Drainboard Corner Turn K-452 Control Bracket 8 x 12 K-452S Splash Mounted Control Bracket 8 x 12 K-453 Control Bracket 14 x 16 K-453S Splash Mounted Control Bracket 14 x 16 K-454 Sidesplash K-456 Scrap Block Installed K-460 Installation of Disposal Cone with 8 x 12 Control Bracket, Faucet Holes (Cone supplied by others) K-460A Installation of Disposal Cone with 14 x 16 Control Bracket, Faucet Holes (Cone supplied by others) K-30 Faucet Wall Mounting Bracket K-72 Leg To Wall Brace K-350 Residential Finish & Packaging ACCESSORIES K-397 Wall Brackets for Sink (Brackets Included with K-495) K-457 Replacement Rubber Scrap Block (See K-456 for install cost) K-474 16 ga., 304 Series S/S Leg with S/S Foot K-475 S/S Legs with S/S Foot K-478 Stainless Steel Bullet Foot K-488 Flanged S/S Bullet Foot K-493 16 ga., 304 Series S/S Welded Leg Assembly with S/S Feet K-494 S/S Welded Leg Assembly with S/S Feet K-497 Galv. Welded Leg Assembly with Plastic Feet K-497A K-496 Galv. Individual Legs with Plastic Feet Leg Assembly For Grease Interceptor w/ Adj. Cross-Bracing & S/S Feet (For Grease Interceptors with 15 Ht. or less. Consult factory for larger Grease Interceptors) K-610 Perforated Stainless Steel Sink Grid (Specify Bowl Size) K-461 Install Collar with 8 x 12 control bracket (Collar by others) K-461A Install Collar with 14 x 16 control bracket (Collar by others) K-470 Modify Bowl Depth K-472 Faucet Hole Revision K-473 Working Height Revision K-476 Punch for Over Flow Holes (Holes Only. N/C when ordering K-15) K-479 Undershelf Under Drainboard K-480 Stainless Steel 12 Wide Shelf (min. of 3 ft.) K-480A Stainless Steel 15 Wide Shelf (min. of 3 ft.) K-490 Provision for Pot Washer (For Wells-PW-106 only) K-491 Provision for Hatco Heater K-495 Turn Down Backsplash (Includes 2 Brackets. See K-397 Addt l Sets) K-498 Tubular Overshelf 12 wide (Min. 3 Ft.) K-499 Stainless Steel Pot Rack K-500 Stainless Steel Apron to Cover Sink Bowls K-500A 17 Stainless Steel Apron to Cover Sink Bowls and Support Lever Drain Handles K-508 Special Sizing Charge (Larger size cut down to smaller size K-508A Special Modification Charge K-510 Prepare Sink for Undercounter Dishwasher (24 drainboard or larger) K-520 Poly Board/Stainless Steel Cover Holder K-550 Stainless Steel Tubular Rack Storage SINK COVERS Choose Model # & Add The Proper Letter In Place Of The Underscore (_). Example: K-2A or FC-455H FOR DEEP DRAWN BOWLS FOR FABRICATED BOWLS Bowl Size Poly Covers S/S Covers Poly Covers S/S Covers Model K-2_ Model K-455_ Model K-2_ Model FC-455_ 16" x 20" C C CF C 20" x 20" E E EF E 24" x 24" F F FF F 10" x 14" A A AF A 20" x 28" G G GF G 14" x 16" B B BF B 18" x 24" D D DF D 18" x 18" Not Available Not Available JF J 20" x 24" Not Available Not Available PF P 24" x 36" Not Available Not Available RF R 20" x 30" Not Available Not Available SF S 24" x 30" Not Available Not Available TF T 15" x 15" Not Available Not Available MF M 14" x 14" H H HF H 12" x 20" I I IF I Custom Covers Available. Consult Factory. www.advancetabco.com Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T. For Orders & Customer Service: Email: customer@advancetabco.com or Fax: 631-242-6900 For Smart Fabrication Quotes: Email: smartfab@advancetabco.com or Fax: 631-586-2933 ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, DEC. 2016 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 12 REF-F

Champion 44 DR Item #105 CH070 STANDARD FEATURES ENERGY STAR Qualified Exclusive DualRinse Technology Dual-pawl cradle drive system One-piece cast stainless steel upper & lower spray arm assemblies Internal removable scrap basket and two-piece scrap screen Standard vertical opening accommodates 18" x 26" sheet pans Wide leakproof swing out insulated hinged doors on wash tank Anti-jam conveyor drive system Energy Sentinel (Idle pump shut-off) Convenient top-mounted controls Automatic tank fill Door safety switch Never leak, ball valve drain closure Enclosure panels (front and sides) Stainless steel heavy-gauge construction, including base and feet Electric tank heat Wash pump 2 Hp motor Stainless steel pump and impeller Single-point electrical connection Self-diagnostic controls Vent fan control switch Stainless steel rear manifolds PREWASH MODELS ONLY External prewash scrap basket Prewash pump 1 Hp motor 22" Prewash 26" Prewash 36" Prewash The DualRinse feature offers the Lowest Water/Utility/Chemical Consumption while circulating a generous 300+ gallons of water for Consistently Good Results Champion Industries, Inc. 2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 Tel: 905/562-4195 Fax: 905/562-4618 (NRA) 7/14 Printed in U.S.A. Project Item No. Quantity 44 DR SERIES 44 DR, 66 DRPW, 70 DRFFPW, 80 DRHDPW High-Temperature Rack Conveyor Dishwashing Machine with Dual Stage Rinse Model 44 DR Shown with Vent Cowl and Damper Option SPECIFIER STATEMENT Photo is for general visual representation only. Please refer to specifications for the latest detailed product information. Specified unit will be Champion Model 44 DR Series high temperature dual rinse rack conveyor dishwashing machine. Features top mounted control cabinet; upper and lower one-piece stainless steel spray arm assemblies, removable internal scrap basket with two-piece scrap screen. Swing out insulated front access doors. Anti-jam conveyor drive system. 1 year parts and labor warranty. Champion Industries, Inc. 3765 Champion Blvd., Winston-Salem, NC 27105 Tel: 336/661-1556 Fax: 336/661-1979 www.championindustries.com 44 DR SERIES RACK CONVEYOR Palm Beach Tennis Second Floor Profitable Food Facili es Page: 13

-A- -DTM3- -B- -A- -A- -A- -A- -DTM3- -B- -A- -DTM3- -B- -A- 26-1/2" 22" Door Clearance Champion 44 DR Item #105 6 16" 44 DR SERIES 3-1/4" 15" 44 DR, 66 DRPW, 70 DRFFPW, 80 DRHDPW High-Temperature Rack Conveyor Dishwashing Machine with 34-3/4" Dual Stage Rinse Inside 7 15" 7 1B 3-1/4" 6 36-3/8" 34-3/4" Inside 16" 26-1/2" 22" Door Clearance 34 MODEL 44 DR Shipping weight crated: 600 lbs. 48-1/4" Dimensions shown in inches Vent Stack [mm] Distance 2" 2" 13" Plumbing Clearance 8" 8A 4" 2 3" 44" 1A 4" 6" 8" 8B 8" 8A 70-1/4" Vent Stack 4" Distance 2 3" 44" 4-1/2" 4" 1A 2 6" 8" 8B 2" 2 32-1/8" 13" 1A Plumbing Clearance 1B 7-3/8" 6 Ven 4-3/4" D 3-1/4" 7-1/4" 20" Clearance 26-1/2" 16" 7-1/4" 20" Clearance 3-1/4" 6 3-2 O 58-1/8" Machine Height 22" Door Clearance 58-1/8" Machine Height 34" Load Height 34" Load Height 34-3/4" Inside 4-1/4" Front View Left to Right Suggested Table Construction 5 5 7 8" 6 4A 4B 21-7/8" 28-5/8" 9-3/8" 10-7/8" 14-1/4" 11-1/4" 16-1/4" 5-7/8" 7 1-3/4" 4A 1-1/2" Can be up to 10" 5/8" 6 4B 16-1/4" 14-1/4"11-1/4" 5-7/8" 4B 6 4A 5 7 6-1/2" 21-7/8" Opening 2-1/2" 20" 3-1/4" Inside Track 4A 4-1/4" 5 8-5/8" 5 5 9-3/8" 4B 8" 44" 8" 29 10-7/8" 66" 6 70" 8A 8B 21-7/8" 7 13" Plumbing Front View 4" 4" Clearance 28-5/8" 5 Right to 2Left 3" 1A 6" 6" 7-1/4" E44DR End View 58-1/8" Machine Height 20" Clearance 34" Load Height 16" Door Clearance 11-1/ 5-7/8" 21" 2-1/4" 6" Nominal Wall Clearance 8-3/4" 5 29-3/4" 4-1/4" 5 4A 4B 6 9-3/8" 10-7/8" 7 4A 2" 48-1/4" Vent Stack Distance 2" 48-1/4" Vent Stack Distance 2" 2" 5 7 21-7/8" 28-5/8" 4-1/2" 2 2" 2 32-1/8" 1A 1B 7-3/8" 1A 4-3/4" 1B 1A 1B 4-3/4" 2 1A 1B 11-3/4" 7-3/8" 2 2" 4-1/2" 26-1/2" 16" 6 3-1/4" 15" 7 15" 7 3-1/4" 6 16" 26-1/2" 22" Door Clearance 22" Door Clearance 34-3/4" Inside Plan View Left to Right 36-3/8" 34-3/4" Inside Plan View Right to Left 34-1/4" Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice. Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 336/661-1556 Fax: 336/661-1979 www.championindustries.com 8" 44" 8" 8A 13" Plumbing Clearance 8B 2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 905/562-4195 70-1/4" 8" Fax: 905/562-4618 44" 8" 4" 4" Vent Stack Distance 8A 8B Palm Beach Tennis Second 2Floor 3" 1A 6" Profitable Food Facili es 4" 4" Page: 14 13" Plumbing Clearance 67-5/8" Vent Stack Distance

-A- -DTM3- -B- -A- -A- -DTM3- -B- -A- -A- -A- -A- -DTM3- -B- -A- -A- -A- -DTM3- -B- 48-1/4" Vent Stack Distance 2" 2" 2 32-1/8" 1A 1B 26-1/2" 16" 44 DR SERIES 22" 44 DR, 66 Door DRPW, 70 DRFFPW, 80 DRHDPW Clearance High-Temperature Rack Conveyor Dishwashing Machine with 34-3/4" Inside Dual Stage Rinse Dimensions shown in inches [mm] MODEL 66 E22PW DRPW WITH 22" PREWASH E26FFPW E36HDPW Shipping weight crated: 7-3/8" 21-7/8" Opening 20" /2" 2-1/2" 3-1/4" Inside 3-1/4" 15" Track 6 58-1/8" 7Machine Height 2 2" 4-1/2" 1B 4-3/4" 1B Champion 44 DR Item #105 4-3/4" 1A 1B 36 3 8 " 34 4 1 " 36-3/8" 36 3 8 " 70-1/4" 13" Plumbing Vent Clearance Stack Distance 7-1/4" 20" Clearance 8" 800 lbs. 8A 4" 2 3" 44" 1A 4" 6" 8" 8B 6 3-1/4" 15" 7 16" Door Clearance 26" 67-5/8" DOOR Vent Stack Distance CLEARANCE Front View 70-1/4" Vent Stack Distance 84-1/4" Vent Stack Distance 34" Load Height 6" ominal Wall ominal earance Wall learance 4" 2 34-3/4" Inside8-3/4" 3" 44" 1A 5 29-3/4" 4" 7 MODEL 70 E26FFPW DRFFPW WITH 5 26" 28-5/8" FRONT FEED E36HDPW PREWASH Shipping 8" weight crated: 6" 8B 16" Door Clearance 34 1 66" 4 " 67-5/8" Vent Stack Distance 4-1/4" 2-1/2" 5 5 850 lbs. 26" DOOR E66DRPW CLEARANCE 6 4A 4B Right 10-7/8" to Left 21-7/8" 9-3/8" 36-3/8" 70-1/4" Vent Stack Distance 14-1/4" 11-1/4" 16-1/4" 5-7/8" 7 4A 6 4B 70" 36 3 8 " 84-1/4" Vent Stack Distance 4-5/8" E70DRFFPW 6-1/2" 5 34-1/4" 66" 67-5/8" Vent Stack Distance 26" Door Clearance Left to Right 80" E80DRHDPW 8-5/8" 5 14-1/2" Front View 5 4A 4B 36-3/8" 6 7 70-1/4" Vent Stack Distance 21-7/8" 28-5/8" 9-3/8" 10-7/8" 14-1/4" 11-1/4" 16-1/4" 5-7/8" 7 4A 4B MODEL 80 E36HDPW DRHDPW WITH 36" HEAVY DUTY PREWASH Shipping weight crated: 6 70" 36 3 8 " 8-5/8" 4-5/8" 5 5 8-1/2" 5 5 5 6-1/2" 14-1/2" Right to Left Left to Right 34-1/4" 66" 36-3/8" 70" 80" 950 lbs. 84-1/4" Vent Stack Distance E70DRFFPW 67-5/8" Vent Stack Distance E80DRHDPW 84-1/4" Vent Stack Distance Front View 8-5/8" 5 8-1/2" 5 5 14-1/2" Right to Left 66" 70" 80" 80" Left to Right NOTE: For complete machine dimensions, plan view, end view, specifications and table construction see 44 DR drawing page. Palm Beach Tennis Second Floor Profitable Food Facili es Page: 15

Champion 44 DR Item #105 44 DR SERIES 44 DR, 66 DRPW, 70 DRFFPW, 80 DRHDPW High-Temperature Rack Conveyor Dishwashing Machine with Dual Stage Rinse Utilities 1 Electrical Connection A Machine electrical connection B Booster electrical connection 2 Hot Water Main connection 3/4" NPT 3 Cold Water Contact Factory 4 Hot Water Tank A Heat inlet connection 1" NPT B Heat return connection 1" NPT 5 Drain Connection 1 1/2" NPT 6 Steam Inlet connection 1 1/4" NPT 7 Condensate Connection 1" NPT return to boiler 8 Vents A Stack connection - Load end 200 CFM @ 1/4" static pressure B Stack connection - Unload end 400 CFM @ 1/4" static pressure Warning: Plumbing and electrical connections should be made by qualified personnel who will observe all the applicable plumbing, sanitary, safety codes and the National Electrical Code. Note: Water Hammer Arrestor (meeting ASSE-1010 standard or equivalent) to be supplied (by others) in common water supply line at service connection. Plumbing Notes: Because of the variation in house-supplied steam and water pressures, steam and water pressure regulating valves (PRVs) may be needed. (Water PRV is standard on machines with booster.) The PRVs can either be purchased from Champion or obtained locally. Venting Notes: Fabricated duct size: 3-7/8" x 15-7/8" (Outside dimensions) Contact factory for single phase information. 44 DR Only TABLE A - Machine Connection Machine only Elec. Specs. 44 DR Only TABLE B - Machine & Booster Connection 40 F/22 C Rise 12kW Machine and Electric built-in booster Elec. Specs. Rated Amps Minimum Supply Ckt. Conductor Ampacity Minimum Overcurrent Protective Device 208/60/3 104 150 150 240/60/3 91 125 125 480/60/3 46 60 60 575/60/3 37 50 50 70 F/39 C Rise 22 kw Machine and Electric built-in booster Elec. Specs. Rated Amps Minimum Supply Ckt. Conductor Ampacity Minimum Overcurrent Protective Device 208/60/3 131 175 175 240/60/3 115 150 150 480/60/3 58 80 80 575/60/3 47 60 60 Machine and steam built-in booster Elec. Specs. Rated Amps Rated Amps Minimum Supply Ckt. Conductor Ampacity Minimum Supply Ckt. Conductor Ampacity Minimum Overcurrent Protective Device 208/60/3 70 90 90 240/60/3 62 80 80 480/60/3 31 40 40 575/60/3 24 35 35 Minimum Overcurrent Protective Device 208/60/3 25 35 35 240/60/3 22 30 30 480/60/3 12 15 15 575/60/3 9 15 15 Dimensions shown in inches 66 DRPW, 70 DRFFPW, 80 DRHDPW TABLE A - Machine Connection Machine only Elec. Specs. Rated Amps Minimum Supply Ckt. Conductor Ampacity Minimum Overcurrent Protective Device 208/60/3 74 100 100 240/60/3 65 90 90 480/60/3 33 45 45 575/60/3 25 35 35 66 DRPW, 70 DRFFPW, 80 DRHDPW TABLE B - Machine & Booster Connection 40 F/22 C Rise 12kW Machine and Electric built-in booster Elec. Specs. 70 F/39 C Rise 22 kw Machine and Electric built-in booster Elec. Specs. Rated Amps Rated Amps Minimum Supply Ckt. Conductor Ampacity Minimum Supply Ckt. Conductor Ampacity Minimum Overcurrent Protective Device 208/60/3 108 150 150 240/60/3 94 125 125 480/60/3 47 60 60 575/60/3 37 50 50 Minimum Overcurrent Protective Device 208/60/3 136 175 175 240/60/3 118 150 150 480/60/3 60 80 80 575/60/3 47 60 60 Machine and steam built-in booster Elec. Specs. Rated Amps Minimum Supply Ckt. Conductor Ampacity Minimum Overcurrent Protective Device 208/60/3 29 40 40 240/60/3 26 35 35 480/60/3 15 20 20 575/60/3 10 15 15 12 kw Booster Only 22 kw Booster Only Elec. Specs. Rated Amps Minimum Supply Ckt. Conductor Ampacity Minimum Overcurrent Protective Device 208/60/3 33 45 45 240/60/3 29 40 40 480/60/3 14 20 20 575/60/3 12 15 15 Elec. Specs. Rated Amps Minimum Supply Ckt. Conductor Ampacity Minimum Overcurrent Protective Device 208/60/3 61 80 80 240/60/3 53 70 70 480/60/3 26 35 35 575/60/3 22 30 30 Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice. Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 336/661-1556 Fax: 336/661-1979 www.championindustries.com 2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 905/562-4195 Fax: 905/562-4618 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 16

Champion 44 DR Item #105 44 DR SERIES 44 DR, 66 DRPW, 70 DRFFPW, 80 DRHDPW High-Temperature Rack Conveyor Dishwashing Machine with Dual Stage Rinse SPECIFICATIONS Capacity Racks per hr. (NSF rated) 208 Wash tank (US gal.) 21 Conveyor speed (ft/min.) 5.8 Motor Horsepower Drive 1/6 Wash 2 Dual Rinse 1/10 Water Consumption US Gal. per hr. (max. use) 112 US Gal. per rack.54 Heating Tank Heat, electric (kw) 15 DualRinse Tank Heat, electric (kw) 3 Tank heat, steam (lbs/hr. required at 15 PSI flow pressure) 75 Electric booster (built-in) (kw supplied for 40 F rise) 12 Electric booster (built-in) (kw supplied for 70 F rise) 22 Steam booster (lbs./hr. required for 40 F rise) 60 Steam booster (lbs./hr. required for 70 F rise) 110 Booster heaters completely inter plumbed, Controls are interwired Venting Load end (minimum CFM) 200 Unload end (minimum CFM) 400 Standard 20" x 20" rack complement Peg 2 Flat 1 NEW Exclusive Digital Gauges One-Piece Cast Stainless Steel Spray Assembly NEW Durable Stainless Steel Start/Stop Switches Stainless Steel Built-in Nested Booster Two-Piece Scrap Screen Built-in Scrap Basket for ease of cleaning LESS IS MORE WITH CHAMPION S DUAL RINSE MODEL 44 DR SERIES Check our NSF listings and you ll see the Dual Rinse offers the lowest water consumption in its class with less than.54 US gallons per rack. This ENERGY STAR qualified product brings energy savings. Our 40 F rise booster only requires 12 kw and 70 F rise is only 22 kw. What the numbers don t show you is the advantage that our Dual Rinse technology provides by making sure all wares are fully rinsed with more than 300 gallons per hour while actual fresh water consumption is only 112 gallons per hour. www.championindustries.com Palm Beach Tennis Second Floor Profitable Food Facili es Page: 17

44 DR SERIES RACK CONVEYOR Champion 44 DR Item #105 44 DR SERIES 44 DR, 66 DRPW, 70 DRFFPW, 80 DRHDPW High-Temperature Rack Conveyor Dishwashing Machine with Dual Stage Rinse OPTIONS & ACCESSORIES :: Tank heat: choice of steam coil, steam injector, hot water coil :: 2 Hp prewash motor :: 48" Blower-dryer - steam or electric :: Booster Heaters (completely interplumbed, controls are interwired) :: Steam: 40 F or 70 F rise :: Electric: 12 kw (40 F rise) (built-in only) :: Electric: 22 kw (70 F rise) (built-in only) :: Heat Recovery Cantilever sideloader (with or without hood) for 90 load operation :: 24" Sideload :: 30" Sideload (accepts sheet pans) :: Extended pawl bar (extended drive unit) for use with load tabling :: Racks: peg or flat racks (specify type) :: Steam pressure regulating valve (unmounted) :: Table limit switch, unmounted (recommended on all rack conveyor installations) :: Vent cowl, stainless steel with 7" stack and locking damper :: Extended vent hood, stainless steel with 7" stack and locking damper :: Water pressure regulating valve (unmounted) (standard with booster) :: Two-point electrical connection :: Water hammer kit :: Drain tempering kit :: Vertical clearance through machine: 24" (instead of standard 20") for larger ware :: Model CCT 180 (180 Corner Conveyor Table) :: Model CCT 90 (90 Corner Conveyor Table) :: Model RCT 64 or RCT 84 Roller Conveyor Table (See factory for custom length) :: Splash shields Model RCT 64 or RCT 84 Roller Conveyor Table NEW CCT 90 90 Corner Conveyor Table (shown) NEW CCT 180 180 Corner Conveyor Table also available Cantilever Sideloader (No hood) Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice. USGBC and related logo is a trademark owned by the U.S. Green Building Council and is used by permission. Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 336/661-1556 Fax: 336/661-1979 www.championindustries.com 2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 905/562-4195 Fax: 905/562-4618 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 18

Advance Tabco CUSTOM Item #106 Description: Dishtable, Soiled Notes: Palm Beach Tennis Second Floor Prof itable Food Facilit ies Page: 19

Advance Tabco DTS K30 84L Item #106 STAINLESS STEEL DISHTABLES KORNER SOIL NEW Tile Edge Design Item #: Qty #: Model #: Project #: DTS-K30-60R Shown Spec-Line: 14 ga. 304 Series Stainless Steel Top. 16 ga. 304 Stainless Steel Legs Stainless Steel Legs with Welded Cross Bracing & Stainless Steel Bullet Feet. UPGRADED! 16 ga. 304 Series Stainless Steel Top. Standard: 16 ga. 304 Stainless Steel Legs Stainless Steel Legs with Welded Cross Bracing & Stainless Steel Bullet Feet. Super Saver: 16 ga. 304 Series Stainless Steel Top. Galvanized Legs with Plastic Bullet Feet. 10-1/2 EXTRA LARGE Bold Looking Backsplash with 2 return and tile edge ACCESSORIES Model # Qty Faucet Wall Shelf Undershelf FEATURES: Tile edge for ease of installation. STANDARD & SUPERSAVER SOIL section features 5 deep sink bowl. SPEC-LINE SOIL section features 8 deep sink bowl. Dishtable system consists of SOIL and CLEAN sections. Table is furnished with 10-1/2 splash with a 2 return. CONSTRUCTION: All TIG welded. Welded areas blended to match adjacent surfaces and to a satin finish. Stainless Steel Gussets welded to a stainless steel support channel. MECHANICAL: Faucet holes in SPLASH punched on 8 centers, faucet not included. Waste drain is 1 1/2 IPS basket type and is included. Nominal sizing on all dishtables for ease of installation. Nominal Size 4 Ft. 5 Ft. 6 Ft. 7 Ft. 8 Ft. 9 Ft. 10 Ft. 12 Ft. L 47 59 71 83 95 107 119 143 14 Gauge 304 16 Gauge 304 16 Gauge 304 16 Ga. Stainless Steel Legs Stainless Steel Legs Galvanized Legs SPEC-LINE STANDARD SUPER SAVER DTS-K30-48L or R DTS-K30-60L or R DTS-K30-72L or R DTS-K30-84L or R DTS-K30-96L or R DTS-K30-108L or R DTS-K30-120L or R DTS-K30-144L or R DTS-K70-48L or R DTS-K70-60L or R DTS-K70-72L or R DTS-K70-84L or R DTS-K70-96L or R DTS-K70-108L or R DTS-K70-120L or R DTS-K70-144L or R DTS-K60-48L or R DTS-K60-60L or R DTS-K60-72L or R DTS-K60-84L or R DTS-K60-96L or R DTS-K60-108L or R DTS-K60-120L or R DTS-K60-144L or R Approx. Wt. 165 lbs. 190 lbs. 215 lbs. 225 lbs. 240 lbs. 355 lbs. 380 lbs. 390 lbs. www.advancetabco.com Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T. Email Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933 NEW YORK GEORGIA TEXAS NEVADA Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 20 P-3

TOL ±.500 Advance Tabco DTS K30 84L Item #106 DIMENSIONS and SPECIFICATIONS ALL DIMENSIONS ARE TYPICAL SEE DISH MACHINE COMPATIBILITY CHART TO ENSURE PROPER FIT Dish Machine Compatibility Chart can be found on our website at www.advancetabco.com under Product Support 2" 59" DISH MACHINE 6" 6" 20" 20" 59" 2" 20" 21 3/8" 30" 30" 21 3/8" 20" L L 1 1/2" OPERATOR 1 1/2" 30" 30" KORNER SOIL LEFT KORNER SOIL RIGHT SPEC-LINE STANDARD & SUPER SAVER 1 1/2" 26 1/2" 2" 1 1/2" 26 1/2" 2" 3" 20x20x8" Sink 10 1/2" Faucet LC 3" 20x20x5" Sink 10 1/2" LC 34" Cross Brace 37" 44 1/2" 34" Cross Brace 44 1/2" 37" 10" (Standard Series Only) 10" LC 17" LC 17" CUSTOMIZE YOUR OWN SYSTEM by Ordering Optional Accessories from our PRODUCT & PRICE GUIDE Splash Detail Description SPEC-LINE STANDARD SUPER SAVER Material 1 5/8 Dia. Legs Gussets Bullet Feet (1 adj.) Cross Bracing Prerinse Bowl Depth Prerinse Basket 14 Ga. 304 Series Stainless Steel Stainless Steel Stainless Steel Welded 8 Included 16 Ga. 304 Series Stainless Steel Stainless Steel Stainless Steel Welded 5 Optional 16 Ga. 304 Series Galvanized Stainless Steel Plastic Optional 5 Optional ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. P-3a 200 Heartland Boulevard, Edgewood, NY 11717-8380 ADVANCE TABCO, DECEMBER 2009 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 21

Advance Tabco DTA 53 Item #106 DTA-53 SPLASH MOUNT PRERINSE FAUCET Meets All Federal Lead Free Standards Item #: Qty #: Model #: Project #: Click This Link To View Assembly Sheet FEATURES: 8 O.C. water supply. Quarter-turn wedge style handles. Colored hot & cold Indexes. Spray head with continuous water flow ring. Heavy duty hose spring. Wall mount bracket. Adjustable spray head hook. MATERIAL: Brass chrome plated body. Chrome plated handles. DIMENSIONS and SPECIFICATIONS C L A D Options & Accessories Replacement Hose Handle Not Included. K-113 Replacement Spray Head and Handle K-114 B 12 Add-A-Faucet For DTA-53 Prerinse Faucet K-117 C C L C L C L C L A Length B Height C D On Center Dimensions 15 34 5 15 8 O.C. www.advancetabco.com Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T. For Orders & Customer Service: Email: customer@advancetabco.com or Fax: 631-242-6900 For Smart Fabrication Quotes: Email: smartfab@advancetabco.com or Fax: 631-586-2933 ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, JULY 2017 REF-G Palm Beach Tennis Second Floor Profitable Food Facili es Page: 22

Advance Tabco K 117 Item #106 K-117 ADD-A_FAUCET Meets All Federal Lead Free Standards Item #: Qty #: Model #: Project #: K-117 Shown on a DTA-53 Prerinse Faucet Click This Link To View Assembly Sheet FEATURES: Fits Advance Tabco K-116, K115 & DTA-53. Quarter-turn wedge style handle. Colored hot & cold Indexes. Spray head with continuous water flow ring. Heavy duty hose spring. Wall mount bracket. Adjustable spray head hook. MATERIAL: Brass chrome plated body. Chrome plates handles. Options & Accessories DIMENSIONS and SPECIFICATIONS Replacement Spout For K-117 Faucet 12 Swing Spout. K-1SP Low Flow Aerator.5 GPM K-08 A Length B Height C D 12 8 13/16 6 3/8 10 7/16 www.advancetabco.com Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T. For Orders & Customer Service: Email: customer@advancetabco.com or Fax: 631-242-6900 For Smart Fabrication Quotes: Email: smartfab@advancetabco.com or Fax: 631-586-2933 ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, JULY 2017 REF-G Palm Beach Tennis Second Floor Profitable Food Facili es Page: 23

Advance Tabco 7 PS 20 Item #108 STAINLESS STEEL HAND SINKS STANDARD SPLASH MOUNTED FAUCETS Wrist Handles Item #: Qty #: Model #: Project #: 7-PS-60 7-PS-68 Keyhole Bracket for easier installation and greater stability. 7-PS-50 7-PS-71 Features Large Size Sink Bowl 16 x 20 x 8 7-PS-67 SINGLE HOLE PUNCH Faucet omitted 7-PS-54 DECK MOUNTED FAUCET 7-PS-70 7-PS-20 LARGE SINK BOWLS Features Large Size Sink Bowl 16 x 14 x 8 7-PS-20-NF Faucet omitted DOUBLE HOLE PUNCH Faucet omitted FEATURES: One piece Deep Drawn sink bowl design. Sink bowl is 10 x 14 x 5. 7-PS-45 sink bowl size is 16 x 20 x 8. 7-PS-49 sink bowl size is 16 x 14 x 8. All sink bowls have a large liberal radii with a minimum dimension of 2 and are rectangular in design for increased capacity. Keyhole wall mount bracket. Stainless steel basket drain 1-1/2 IPS. Additional Features: 7-PS-20 4 O.C. deck mounted centerset faucet. 7-PS-20-NF Deck mounted faucet omitted. 4 O.C. hole punch. 7-PS-45 Same as above plus 2 Support Brackets (Hardware Included). 7-PS-49 4 O.C. splash mounted gooseneck faucet. 7-PS-50 Lever operated drain and built-in overfl ow with plastic overfl ow tube and spring clamps. 1-1/2 P-Trap. 4 O.C. splash mounted gooseneck faucet. 7-PS-54 4 O.C. splash mounted gooseneck faucet. Features 1-1/2 P-Trap. 7-PS-60 4 O.C. splash mounted gooseneck faucet. 7-PS-67 Features lever operated drain. 7-PS-68 4 O.C. splash mounted gooseneck faucet with Wrist Handles. 7-PS-70 Splash mounted faucet omitted. 4 O.C. hole punch. 7-PS-71 Splash mounted faucet omitted. Single center hole. CONSTRUCTION: All TIG welded. Welded areas blended to match adjacent surfaces and to a satin fi nish. Die formed Countertop Edge with a No-Drip offset. One sheet of stainless steel - No Seams. MATERIAL: Heavy gauge type 304 series stainless steel. Wall mounting bracket is Galvanized and of offset design. All fi ttings are brass / chrome plated unless otherwise indicated. MECHANICAL: Faucet supply is 1/2 IPS male thread hot and cold. 7-PS-45 7-PS-49 Standard Faucet conforms to NSF 61 Standard 9. Faucets Are AB1953 Lead Free Compliant. For Replacement Faucets & Upgrades, Drains & Accessories Visit our website at www.advancetabco.com www.advancetabco.com Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T. For Orders & Customer Service: Email: customer@advancetabco.com or Fax: 631-242-6900 For Smart Fabrication Quotes: Email: smartfab@advancetabco.com or Fax: 631-586-2933 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 24 REF-B

Advance Tabco 7 PS 20 Item #108 DIMENSIONS and SPECIFICATIONS TOL Overall: ±.500 Interior: ±.250 FITTINGS SUPPLIED AS SHOWN ALL DIMENSIONS ARE TYPICAL 7-PS-20 17 1/4" 10" 17 1/4" 2" TOP VIEW FOR: 7-PS-50 7-PS-54 7-PS-60 7-PS-68 7-PS-70 15 1/4" 17 1/4" 2" 14" 15 lbs. 13" 8" 5" 2" Faucet Sink Bowl 10 x 14 x 5 7-PS-50 & 7-PS-54* NOTE: *7-PS-54 Hand Sink Excludes Lever Drain and Overflow 7-PS-67 17 1/4" 2" Gooseneck Faucet 15 1/4" 13" 8" 2" 5" Gooseneck Faucet *Lever Drain 13" 8" 2" 15 lbs. P-Trap 15 lbs. 5" Lever Drain 7-PS-60 Gooseneck Faucet 7-PS-45 24 3/4" 2" 13" 8" 2" 5" 21 7/8" 16" 13 lbs. 20" Gooseneck Faucet 7-PS-68 Gooseneck Faucet With Wrist Handles 16" 8" 2" 13" 13" 8" 2" 31 lbs. 5" 7-PS-49 19" 2" 13 lbs. 19 1/4" 14" 7-PS-71 13" C L 2 5/8" 8" 2" 5" 16" Gooseneck Faucet 7-PS-70 16" 8" 2" 13" C L 13" 3 5/8" 8" 2" 5" 31 lbs. 12 lbs. REF-B 200 Heartland Boulevard, Edgewood, NY 11717-8380 ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, MAY 2017 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 25

Soda Vendor SODA TOWER Item #109 Description: Soda Beverage Dispensing Tower Notes: Palm Beach Tennis Second Floor Prof itable Food Facilit ies Page: 26

Advance Tabco BEV 30 120L Item #110 STAINLESS STEEL ENCLOSED BASE BEVERAGE TABLE Item #: Qty #: Model #: Project #: Model # BEV-30-48LorR* BEV-30-60LorR* BEV-30-72LorR* BEV-30-84LorR* BEV-30-96LorR* BEV-30-108LorR* BEV-30-120LorR* BEV-30-144LorR* Length Weight 48 230 lbs. 60 250 lbs. 72 300 lbs. 84 350 lbs. 96 400 lbs. 108 450 lbs. 120 500 lbs. 144 550 lbs. * SPECIFY SINK LEFT OR RIGHT END: Please designate left or right sink location by using L or R after model number when ordering FEATURING BOLT-ON STAINLESS STEEL LEG FEATURES: Top is furnished with a 2 x 1 square die embossed No-Drip countertop offset edge with 1/2 return on 3 sides and a 10 splash with a 2 return on the rear side. UNIT BODY DESIGN sides, back and shelf are welded to form a single rigid structure. Furnished with a stainless steel intermediate shelf and a 14 x 16 x 12 sink bowl integrally welded to top. 1 1/2 I.P.S. basket type drain. TOP is assembled to body to form a flush fit and is supplied with a 5 x 1 urn trough with no-splash drain plate. G.F.I. duplex electrical outlet mounted in back splash. Front hinge door and open back under sink area permits easeof-installation of plumbing fixtures. Partial undershelf for storage. Easy to install - multi-purpose unit. MATERIAL: TOP is 14 gauge stainless steel type 304 series. BODY is 18 gauge stainless steel type 430 series. LEGS are stainless steel and include 1 1/2 adjustable hex foot. FAUCET is splash mounted 4 O.C. with an 8 1/2 wide gooseneck spout. Supply is 1/2 hot and cold. CONSTRUCTION: All TIG welded. TOP and all exposed surfaces are mechanically polished to a satin finish and sound deadened. Countertop edge is polished to a MIRROR finish. Roll formed embossed galvanized hat channels are secured to top by means of structural adhesive and weld studs. Legs bolt on to table base. www.advancetabco.com Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T. For Orders & Customer Service: Email: customer@advancetabco.com or Fax: 631-242-6900 For Smart Fabrication Quotes: Email: smartfab@advancetabco.com or Fax: 631-586-2933 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 27 REF-O

Advance Tabco BEV 30 120L Item #110 TOL ±.500 DETAILS and SPECIFICATIONS ALL DIMENSIONS ARE TYPICAL 14 x 16 x 12 Sink Bowl 7 Grommet 8 " Hole 1 1 " I.P.S. Drain 2 Model # Length A B BEV-30-48LorR* 48 18 12 5" L 14 x16 x12 Sink 2" BEV-30-60LorR* 60 24 LC Drain Hose 14 BEV-30-72LorR* 39" 72 (Provided By Others) 36 20 BEV-30-84LorR* 84 36 20 BEV-30-96LorR* 96 36 20 P-Trap (Provided By Others) Branch Tailpiece (Provided By Others) BEV-30-108LorR* 108 36 20 BEV-30-120LorR* 120 36 20 BEV-30-144LorR* 144 36 20 8 7 8 " Counter Top Edge On Front & Sides 1 1 " I.P.S. Drain 2 Urn Trough Drain A 3" 20" 5" 30" 2" Punch 1 1/8" Holes For A K-60 Faucet Supplied By Advance Tabco 10" 4" Gfi Duplex Electrical Outlet B 10" 13 1 8 " LC S/S Fixed Midshelf LC 2" 2 1 2 " 24" Hinged Door Partial Undershelf In Sink 35 1 2 " Cabinet Only 12" 14" S/S Legs W/ Adj. Bullet Feet 12" No Rear Panel Plumbing Access 1" 6" S/S Fixed Undershelf SUGGESTED PLUMBING COUNTERTOP EDGE DETAIL Rear of sink cabinet is open for easy plumbing installation 7 8 " Grommet Hole 1 1 " I.P.S. Drain 2 SPLASH DETAIL 39" LC Drain Hose (Provided By Others) P-Trap (Provided By Others) Branch Tailpiece (Provided By Others) REF-O 200 Heartland Boulevard, Edgewood, NY 11717-8380 ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, MAY 2017 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 28

Advance Tabco DI 1 9 Item #110 STAINLESS STEEL DROP-IN SINKS One Compartment - FOR GENERAL PURPOSE USE Sinks Include Faucet & Drain Item #: Qty #: Model #: Project #: DI-1-168 18 Gauge DI-1-2012 18 Gauge DI-1-208 18 Gauge DI-1-30 20 Gauge LARGEST ONE COMPARTMENT DROP-IN SINK IN THE INDUSTRY! Supplied with K-53 Faucet DI-1-2812 16 Gauge FEATURES: One piece seamless Deep Drawn sink bowl design. All sink bowls have a large liberal radii with a minimum dimension of 2 and are rectangular in design for increased capacity. Self-Rim Design. Mounting clips provided accommodates all thicknesses of counter. (Quantity supplied varies based on drop in sink ordered). DI-1-30 & DI-1-168: includes 4 O.C. K-52 faucet. DI-1-208 & DI-1-2012: includes 4 O.C. K-50 faucet. DI-1-2812: includes 4 O.C. K-53 faucet. CONSTRUCTION: Unit fabricated from one sheet of stainless steel. All bowls are Sound Deadened. Units feature Advance Tabco s Smart Finish. MECHANICAL: Faucet supply is 1/2 IPS male thread. Deck mounted faucet is furnished with aerator. MATERIAL: Type 304 series stainless steel. Faucets are brass-nickel plated. Stainless Steel 1-1/2 IPS basket drain. Available Faucets & Accessories Deck Mounted 8 Swing Spout. 4 O.C. Deck Mounted Gooseneck. 4 O.C. Deck Mounted. 12 Swing Spout. 4 O.C. Deck Mounted 8 1/2 Gooseneck. 4 O.C. Deck Mounted Swing w/spray. 8 O.C.* Deck Mtd. X.H.D. 3 1/2 Gooseneck. 4 O.C. Mounting Clips (Bag of 4). *REQUIRES K-472 FAUCET HOLE REVISION Model # K-50 K-52 K-53 K-55 K-58 K-62 K-28 Qty STANDARD MOUNTING CLIPS For countertops over 7/8 and up to 2 thick. Replacement # K-28 (Per Sink) Standard Faucet conforms to NSF 61 Standard 9. Faucets Are AB1953 Lead Free Compliant. www.advancetabco.com Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T. For Orders & Customer Service: Email: customer@advancetabco.com or Fax: 631-242-6900 For Replacement Faucets & Upgrades, Drains & Accessories visit our website at www.advancetabco.com For Smart Fabrication Quotes: Email: smartfab@advancetabco.com or Fax: 631-586-2933 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 29 REF-A

Advance Tabco DI 1 9 Item #110 DIMENSIONS and SPECIFICATIONS TOL ±.125 ALL DIMENSIONS ARE TYPICAL DI-1-208 & DI-1-2012 DI-1-168 Cut-Out Size 22 1/4 x 20 1/4 1 1/4 radius corners Cut-out Size 18 1/4 x 18 1/4 1 1/4 radius corners DI-1-208 Approx. Wt. 18 lbs. DI-1-2012 Supplied with K-52 Faucet Approx. Wt. 15 lbs. Approx. Wt. 20 lbs. DI-1-2812 Supplied with K-50 Faucet Cut-out Size 30 1/4 x 24 1/4 1 1/4 radius corners DI-1-30 Cut-Out Size 15 x 14 1/4 1 1/4 radius corners Approx. Wt. 42 lbs. Supplied with K-53 Faucet Approx. Wt. 11 lbs. Supplied with K-52 Faucet TYPICAL INSTALLATION OVERALL DIMENSION (O.D) Cut-Out Size = L to R x F to B CUTOUT DIMENSION (O.D -3/4") Standard Mounting Clips Fit Countertops Over 7/8 & Up To 2 Thick. REF-A 200 Heartland Boulevard, Edgewood, NY 11717-8380 ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, FEBRUARY 2018 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 30

Bunn 38700.0013 Item #112 AXIOM-TWIN-APS 23.5" x 22.2" x 16.0" (59.7cm x 56.4cm x 40.6cm) Adjusts automatically to varying water pressure Electronic diagnostics and built-in tank drain make service easier For high lime areas, BrewLOGIC technology calculates flow rate and adjusts brew time to maintain consistent pot levels Large 200oz. (5.9L) tank provides back-to-back brewing capacity Ensure coffee quality with programming for brew level, cold brew lock- out and tank temperature, set easily from the front of the machine Coffee extraction controlled with programmable pre-infusion, pulse brew and digital temperature precision Brews directly into 1.9 to 3L airpots Energy-saver mode reduces tank temperature during idle periods Hot water faucet SplashGard funnels deflect hot liquids away from the hand Twin brew head system Agency: Servers and airpots sold separately Specifications Product #: 38700.0013 Water Access: Plumbed Finish: Stainless Funnel: Stainless Steel Faucet: Upper Additional Features DBC Electrical & Capacity Volts Amps Watts Cord Attached Plug Type 8oz cups/hr 236ml cups/hr Input H²O Temp. Phase # Wires plus Ground Hertz 120/240 26 6100 No - 240 60 F (15.5 C) 1 3 60 Plumbing Requirements PSI kpa Fitting Supplied Water Flow Required (GPM) 20-90 138-621 3/8" Male Flare Fitting - CAD Drawings 2D Revit KLC BUNN reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Created on: 09/13/2017 For most current specifications and other info visit bunn.com. Palm Beach Tennis Second Floor Profitable Food Facili es Page: 31

Bunn 38700.0013 Item #112 Unit Shipping Width Height Depth Width Height Depth Weight Volume English 16.0 in. 23.5 in. 22.2 in. 19.9 in. 28.5 in. 25.8 in. 52.950 lbs 5.440 ft³ Metric 40.6 cm 59.7 cm 56.4 cm 50.5 cm 72.4 cm 65.5 cm 24.018 kgs 0.154 m³ BUNN reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Created on: 09/13/2017 For most current specifications and other info visit bunn.com. Palm Beach Tennis Second Floor Profitable Food Facili es Page: 32

Bunn 38700.0013 Item #112 Related Products & Accessories:AXIOM-TWIN-APS(38700.0013) FILTERS,REGULAR1M 500/2 50/CL PAPEL FILTRANTE FUNNEL ASSY,SST-BLK HDL(7.62 PORTA FILTRO WATER FILTER, EQHP-10L Product #: 20115.0000 Product #: 20115.0000 Product #: 20217.0000 Product #: 20217.0000 Product #: 39000.0001 WATER FILTER, EQHP-10 WATER FILTER, SCALE- PRO FILTRO DE AGUA CON ACCESORIOS Product #: 39000.0004 Product #: 39000.0010 Product #: 39000.0010 BUNN reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Created on: 09/13/2017 For most current specifications and other info visit bunn.com. Palm Beach Tennis Second Floor Profitable Food Facili es Page: 33

Bunn 38700.0013 Item #112 Serving & Holding Options:AXIOM-TWIN-APS(38700.0013) AIRPOT, 2.5L GL PB SINGLE PK AIRPOT, 2.5L GL PB 6/ CASE AIRPOT, 2.2L GL PB SINGLE PK AIRPOT, 2.2L GL PB 6/ CASE AIRPOT, 2.5L SST LA SINGLE PK Product #:13041.0001 Product #:13041.0101 Product #:28696.0002 Product #:28696.0006 Product #:32125.0000 TERMO AIRPOT, 2.5L SST LA 6/ CASE TERMO AIRPOT, 3.0L SST LA SINGLE PK TERMO Product #:32125.0000 Product #:32125.0100 Product #:32125.0100 Product #:32130.0000 Product #:32130.0000 AIRPOT, 3.0L SST LA 6/ CASE TERMO AIRPOT, 2.2L GL LA 6/ CASE AIRPOT, 3.8L SST LA SINGLE PK TERMO Product #:32130.0100 Product #:32130.0100 Product #:32700.0000 Product #:36725.0000 Product #:36725.0000 AIRPOT, 3.8L SST LA 6/ CASE AIRPOT, 2.2L SST LA SINGLE PK Product #:36725.0100 Product #:44311.0000 BUNN reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Created on: 09/13/2017 For most current specifications and other info visit bunn.com. Palm Beach Tennis Second Floor Profitable Food Facili es Page: 34

Bunn 35700.0001 Item #113 ITCB-DV-DBC (short) 31.1" x 23.8" x 11.5" (79.0cm x 60.5cm x 29.2cm) Two programmable batch switches allow full and half batches of iced tea Brews into most BUNN iced tea dispensers (except TDS-5 and TDO-Ns),1.9 to 3.8L airpots, thermal carafes and can accommodate BUNN ThermoFresh Servers Brew counter keeps track of how many batches brewed BrewWISE intelligence with pre-infusion and pulse brew for maximum flavor extraction Digital temperature control and cold brew lockout Display advertising messages and machine status Dual voltage adaptable (Can operate at 120V/15 amp or 120/208-240V/20 amp) Easy pulse display allows for simplified programming of pulse routine Energy-saver mode reduces tank temperature during idle periods English and Spanish alphanumeric display Large tank provides back-to-back brewing capacity and allows 3 or 5gal (11.4 to 18.9L) tea batches Agency: Servers and airpots sold separately Specifications Product #: 35700.0001 Faucet: Upper Water Access: Plumbed Finish: Stainless Funnel: Black Plastic Funnel: Translucent Tea Funnel Additional Features Quickbrew Funnel Tip Smart Funnel Compatible With Overlays Quick Brew Electrical & Capacity Volts Amps Watts Cord Attached Plug Type 8oz cups/hr 236ml cups/hr Input H²O Temp. Phase # Wires plus Ground Hertz 120 14 1700 Yes NEMA 5-15P 336 60 F (15.5 C) 1 2 60 120/208 13 2650 - N/A 1088 60 F (15.5 C) 1 - - 120/240 15 3500 - N/A 1293 60 F (15.5 C) 1 - - Plumbing Requirements PSI kpa Fitting Supplied Water Flow Required (GPM) 20-90 138-621 1/4" Male Flare Fitting - CAD Drawings 2D Revit KLC BUNN reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Created on: 08/04/2017 For most current specifications and other info visit bunn.com. Palm Beach Tennis Second Floor Profitable Food Facili es Page: 35

Bunn 35700.0001 Item #113 Unit Shipping Width Height Depth Width Height Depth Weight Volume English 11.5 in. 31.1 in. 23.8 in. - - - 45.100 lbs - Metric 29.2 cm 79.0 cm 60.5 cm - - - 20.457 kgs - BUNN reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Created on: 08/04/2017 For most current specifications and other info visit bunn.com. Palm Beach Tennis Second Floor Profitable Food Facili es Page: 36

Bunn 35700.0001 Item #113 Related Products & Accessories:ITCB-DV-DBC (short)(35700.0001) FUNNEL ASSY,SMOKE- TEA(TU3/T3) FUNNEL ASSY,BLK- CENTER OUTLET FILTERS TEA/SYS2 500PK/1 50/CL PAPEL FILTRANTE FILTERS, GOURMET 500 500/1 50/CL Product #: 03021.0004 Product #: 03021.0008 Product #: 20100.0000 Product #: 20100.0000 Product #: 20138.1000 PAPEL FILTRANTE POUCHPACK FUNL AY, TEA SMK S-T WATER FILTER, EQHP-10 WATER FILTER, EQHP- TEA CARTRIDGE, EQHP-10CRTG Product #: 20138.1000 Product #: 35282.0002 Product #: 39000.0004 Product #: 39000.0007 Product #: 39000.1004 CARTRIDGE, EQHP- TEACRTG Product #: 39000.1007 BUNN reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Created on: 08/04/2017 For most current specifications and other info visit bunn.com. Palm Beach Tennis Second Floor Profitable Food Facili es Page: 37

Bunn 35700.0001 Item #113 Serving & Holding Options:ITCB-DV-DBC (short)(35700.0001) AIRPOT, 2.5L GL PB SINGLE PK AIRPOT, 2.5L GL PB 6/ CASE AIRPOT, 2.5L SST LA SINGLE PK TERMO AIRPOT, 2.5L SST LA 6/ CASE Product #:13041.0001 Product #:13041.0101 Product #:32125.0000 Product #:32125.0000 Product #:32125.0100 TERMO AIRPOT, 3.0L SST LA SINGLE PK TERMO AIRPOT, 3.0L SST LA 6/ CASE TERMO Product #:32125.0100 Product #:32130.0000 Product #:32130.0000 Product #:32130.0100 Product #:32130.0100 TDS-3, 3 GAL TDO-4, RESERVOIR TDO-4, RESERVOIR BREW THRU DISPENSADOR DE TÉ TDO-4, W/BREW THRU LID & LIFT HANDLE Product #:33000.0000 Product #:34100.0000 Product #:34100.0002 Product #:34100.0002 Product #:34100.0020 AIRPOT, 3.8L SST LA SINGLE PK TERMO AIRPOT, 3.8L SST LA 6/ CASE TF SERVER, 1G/3.8L MECH TERMO Product #:36725.0000 Product #:36725.0000 Product #:36725.0100 Product #:44000.0000 Product #:44000.0000 BUNN reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Created on: 08/04/2017 For most current specifications and other info visit bunn.com. Palm Beach Tennis Second Floor Profitable Food Facili es Page: 38

Bunn 35700.0001 Item #113 Serving & Holding Options:ITCB-DV-DBC (short)(35700.0001) TF SERVER, 1G/3.8L MECH BLK TERMO TF SERVER, 1.5G/5.7L MECH TERMO TF SERVER, 1.5G/5.7L MECH BLK Product #:44000.0001 Product #:44000.0001 Product #:44050.0000 Product #:44050.0000 Product #:44050.0001 TERMO Product #:44050.0001 BUNN reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Created on: 08/04/2017 For most current specifications and other info visit bunn.com. Palm Beach Tennis Second Floor Profitable Food Facili es Page: 39

True T 23G HC~FGD01 Item #114 Model: TRUE FOOD SERVICE EQUIPMENT, INC. 2001 East Terra Lane O Fallon, Missouri 63366-4434 (636)240-2400 Fax (636)272-2408 Toll Free (800)325-6152 Intl Fax# (001)636-272-7546 Parts Dept. (800)424-TRUE Parts Dept. Fax# (636)272-9471 www.truemfg.com T-23G-HC~FGD01 Project Name: Location: Item #: Model #: Qty: AIA # T-Series: Reach-In Glass Swing Door Refrigerator with Hydrocarbon Refrigerant~Framed Glass Door Version 01 SIS # T-23G-HC~FGD01 True s glass door reach-in s are designed with enduring quality that protects your long term investment. Designed using the highest quality materials and components to provide the user with colder product temperatures, lower utility costs, exceptional food safety and the best value in today s food service marketplace. Factory engineered, self-contained, capillary tube system using environmentally friendly R290 hydro carbon refrigerant that has zero (0) ozone depletion potential (ODP), & three (3) global warming potential (GWP). High capacity, factory balanced refrigeration system that maintains cabinet temperatures of 33 F to 38 F (.5 C to 3.3 C) for the best in food preservation. Stainless steel front. The finest stainless available with higher tensile strength for fewer dents and scratches. Energy efficient, Low-E, double pane thermal glass door. LED interior lighting provides more even lighting throughout the cabinet. Safety shielded. Adjustable, heavy duty PVC coated shelves. Positive seal self-closing door. Lifetime guaranteed door hinges and torsion type closure system. Bottom mounted units feature: No stoop lower shelf. Storage on top of cabinet. Compressor performs in coolest, most grease free area of kitchen. Easily accessible condenser coil for cleaning. ROUGH-IN DATA Model Doors Shelves Specifications subject to change without notice. Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number). Cabinet Dimensions (inches) (mm) W D H* HP Voltage Amps NEMA Config. Cord Length (total ft.) (total m) T-23G-HC~FGD01 1 3 27 297/8 783/8 1/4 115/60/1 2.2 5-15P 9 335 686 759 1991 1/4 230-240/50/1 1.2 2.74 152 Depth does not include 13/8" (35 mm) for door handle. * Height does not include 5" (127 mm) for castors or 6" (153 mm) for optional legs. Crated Weight (lbs.) (kg) Plug type varies by country. MADE WITH INNOVATION IN THE USA APPROVALS: AVAILABLE AT: 5/17 Printed in U.S.A. Palm Beach Tennis Second Floor Profitable Food Facili es Page: 40

True T 23G HC~FGD01 Item #114 Model: T-23G-HC~FGD01 STANDARD FEATURES DESIGN True s commitment to using the highest quality materials and oversized refrigeration systems provides the user with colder product temperatures, lower utility costs, exceptional food safety and the best value in today s food service marketplace. REFRIGERATION SYSTEM Factory engineered, self-contained, capillary tube system using environmentally friendly R290 hydro carbon refrigerant that has zero (0) ozone depletion potential (ODP), & three (3) global warming potential (GWP). High capacity, factory balanced refrigeration system that maintains cabinet temperatures of 33 F to 38 F (.5 C to 3.3 C) for the best in food preservation. State of the art, electronically commutated evaporator and condenser fan motors. ECM motors operate at higher peak efficiencies and move a more consistent volume of air which produces less heat, reduces energy consumption and provides greater motor reliability. Bottom mounted condensing unit positioned for easy maintenance. Compressor runs in coolest and most grease free area of the kitchen. Allows for storage area on top of unit. CABINET CONSTRUCTION Exterior - Stainless steel front. Anodized quality aluminum ends, back and top. Interior - attractive, NSF approved, clear coated aluminum liner. Stainless steel floor with coved corners. PLAN VIEW T-Series: Reach-In Glass Swing Door Refrigerator with Hydrocarbon Refrigerant~Framed Glass Door Version 01 Insulation - entire cabinet structure is foamedin-place using Ecomate. A high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Welded, heavy duty steel frame rail, black powder coated for corrosion protection. Frame rail fitted with 4" (102 mm) diameter stem castors - locks provided on front set. DOOR Low-E, double pane thermal glass assembly with extruded aluminum frame. Door lock standard. Door fitted with 15" (381 mm) long extruded aluminum handle. Positive seal self-closing door. Lifetime guaranteed door hinges and torsion type closure system. Magnetic door gasket of one piece construction, removable without tools for ease of cleaning. SHELVING Three (3) adjustable, heavy duty PVC coated wire shelves 22 7/8"L x 23 1/4"D (582 mm x 591 mm). Four (4) chrome plated shelf clips included per shelf. Shelf support pilasters made of same material as cabinet interior; shelves are adjustable on 1/2" (13 mm) increments. LIGHTING LED interior lighting provides more even lighting throughout the cabinet. Safety shielded. 32 1/32" 813mm MODEL FEATURES Exterior temperature display. Evaporator is epoxy coated to eliminate the potential of corrosion. NSF/ANSI Standard 7 compliant for open food product. ELECTRICAL Unit completely pre-wired at factory and ready for final connection to a 115/60/1 phase, 15 amp dedicated outlet. Cord and plug set included. OPTIONAL FEATURES/ACCESSORIES Upcharge and lead times may apply. 230-240V / 50 Hz. 6" (153 mm) standard legs. 6" (153 mm) seismic/flanged legs. Alternate door hinging (factory installed). Additional shelves. Half door bun tray racks. Each holds up to eleven 18"L x 26"D (458 mm x 661 mm) sheet pans (sold separately). Full door bun tray rack. Holds up to twentytwo 18"L x 26"D (458 mm x 661 mm) sheet pans (sold separately). 27" 685mm 1 13/16" 46mm 29 3/4" 756mm 15/32" 12mm 78 7/16" 1992mm 83 11/16" 2125mm 55 31/32" 1421mm 25 7/8" 657mm WARRANTY* Three year warranty on all parts and labor and an additional 2 year warranty on compressor. (U.S.A. only) *RESIDENTIAL APPLICATIONS: True assumes no liability for parts or labor coverage for component failure, factory defect or any other damages for units installed in non-commercial foodservice or residential applications. 5 1/4" 133mm 4" 102mm METRIC DIMENSIONS ROUNDED UP TO THE NEAREST WHOLE MILLIMETER SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE TRUE FOOD SERVICE EQUIPMENT 2001 East Terra Lane O Fallon, Missouri 63366-4434 (636)240-2400 Fax (636)272-2408 Toll Free (800)325-6152 Intl. Fax# (001)636-272-7546 www.truemfg.com KCL Model Elevation Right Plan 3D Back T-23G-HC~FGD01 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 41

Advance Tabco KSS 308 Item #116 STAINLESS STEEL WORK TABLES PREMIUM Series - 5 Backsplash - Undershelf Style Item #: Qty #: Model #: Project #: FEATURES: Top is furnished with a 1 5/8 sanitary rolled rim edge on front, 1 5/8 square side edges, and a 5 splash with a 1 return on the rear side. 24 wide tables supplied with TWO hat channels stud welded to reinforce and maintain a level working surface. 30 and 36 wide tables supplied with THREE hat channels. Pre-engineered welded angle adapters insure ease of future drawer installation. Aluminum die cast leg-to-shelf clamp secures shelf to leg eliminating unsightly nuts and bolts. Undershelf is adjustable. CONSTRUCTION: All TIG welded. Exposed weld areas polished to match adjacent surfaces. Entire top mechanically polished to a satin finish. Top is sound deadened. Roll formed embossed galvanized hat channels are secured to top by means of structural adhesive and weld studs. Gussets welded to support hat sections. KSS-Series: Stainless Steel Legs & Undershelf 24 30 36 L Wide Wide Wide 30 24 36 48 60 72 84 96 108 120 132 144 KSS-240 KSS-242 KSS-243 KSS-244 KSS-245 KSS-246 KSS-247 KSS-248 KSS-249 KSS-2410 KSS-2411 KSS-2412 KSS-300 KSS-302 KSS-303 KSS-304 KSS-305 KSS-306 KSS-307 KSS-308 KSS-309 KSS-3010 KSS-3011 KSS-3012 KSS-363 KSS-364 KSS-365 KSS-366 KSS-367 KSS-368 KSS-369 KSS-3610 KSS-3611 KSS-3612 NEW Rolled Rim Edges on Front & Splash on Back and Square Side Edges MATERIAL: KSS-SERIES: Stainless Steel Legs & Undershelf TOP: 14 gauge stainless steel type 304 series. SHELF: 18 gauge stainless steel. LEGS: 1 5/8 diameter tubular stainless steel. 1 adjustable stainless steel bullet feet. Stainless steel gussets. KLG-SERIES: Galvanized Legs & Undershelf TOP: 14 gauge stainless steel type 304 series. SHELF: 18 gauge galvanized steel. LEGS: 1 5/8 diameter tubular galvanized steel. 1 adjustable plastic bullet feet. Galvanized steel gussets. KLG-Series: Galvanized Steel Legs & Undershelf 24 30 36 L Wide Wide Wide 30 24 36 48 60 72 84 96 108 120 132 144 KLG-240 KLG-242 KLG-243 KLG-244 KLG-245 KLG-246 KLG-247 KLG-248 KLG-249 KLG-2410 KLG-2411 KLG-2412 KLG-300 KLG-302 KLG-303 KLG-304 KLG-305 KLG-306 KLG-307 KLG-308 KLG-309 KLG-3010 KLG-3011 KLG-3012 Featuring as Standard: THE PROVEN ORIGINAL ADVANCE TABCO Adjustable Undershelf with Die Cast Leg Clamp KLG-363 KLG-364 KLG-365 KLG-366 KLG-367 KLG-368 KLG-369 KLG-3610 KLG-3611 KLG-3612 Create Your Own Efficient Workstation with the Available Standard Accessories (Visit Section K) www.advancetabco.com Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T. Email Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933 NEW YORK GEORGIA TEXAS NEVADA Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 42 J-2

Advance Tabco KSS 308 Item #116 DETAILS and SPECIFICATIONS ALL DIMENSIONS ARE TYPICAL TOL ±.500 All Units Shipped Unassembled (KD) for Reduced Shipping Costs. KSS & KLG Series Undershelf Style 5 Backsplash Finished size of undershelf = Length minus 5 3/4 Width minus 5 3/4 Units 8ft. and larger are furnished with six (6) legs KSS-Series: Stainless Steel Legs & Undershelf 24 Wt. 30 Wt. 36 L Wt. Wide Wide Wide 30 24 36 48 60 72 84 96 108 120 132 144 KSS-240 KSS-242 KSS-243 KSS-244 KSS-245 KSS-246 KSS-247 KSS-248 KSS-249 KSS-2410 KSS-2411 KSS-2412 55 lbs. 50 lbs. 66 lbs. 81 lbs. 95 lbs. 113 lbs. 135 lbs. 150 lbs. 165 lbs. 268 lbs. 301 lbs. 316 lbs. KSS-300 KSS-302 KSS-303 KSS-304 KSS-305 KSS-306 KSS-307 KSS-308 KSS-309 KSS-3010 KSS-3011 KSS-3012 70 lbs. 56 lbs. 77 lbs. 92 lbs. 111 lbs. 129 lbs. 153 lbs. 171 lbs. 195 lbs. 294 lbs. 331 lbs. 346 lbs. KSS-363 KSS-364 KSS-365 KSS-366 KSS-367 KSS-368 KSS-369 KSS-3610 KSS-3611 KSS-3612 92 lbs. 101 lbs. 121 lbs. 142 lbs. 169 lbs. 189 lbs. 260 lbs. 315 lbs. 358 lbs. 373 lbs. KLG-Series: Galvanized Steel Legs & Undershelf 24 Wt. 30 Wt. 36 L Wt. Wide Wide Wide 30 24 36 48 60 72 84 96 108 120 132 144 KLG-240 KLG-242 KLG-243 KLG-244 KLG-245 KLG-246 KLG-247 KLG-248 KLG-249 KLG-2410 KLG-2411 KLG-2412 55 lbs. 50 lbs. 66 lbs. 81 lbs. 95 lbs. 113 lbs. 135 lbs. 150 lbs. 165 lbs. 268 lbs. 301 lbs. 316 lbs. KLG-300 KLG-302 KLG-303 KLG-304 KLG-305 KLG-306 KLG-307 KLG-308 KLG-309 KLG-3010 KLG-3011 KLG-3012 70 lbs. 56 lbs. 77 lbs. 92 lbs. 111 lbs. 129 lbs. 153 lbs. 171 lbs. 195 lbs. 294 lbs. 331 lbs. 346 lbs. KLG-363 KLG-364 KLG-365 KLG-366 KLG-367 KLG-368 KLG-369 KLG-3610 KLG-3611 KLG-3612 92 lbs. 101 lbs. 121 lbs. 142 lbs. 169 lbs. 189 lbs. 260 lbs. 315 lbs. 358 lbs. 373 lbs. J-2a 200 Heartland Boulevard, Edgewood, NY 11717-8380 ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, SEPTEMBER 2005 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 43

Advance Tabco TA 11B 2 Item #116 Welded Sinks Into Table Top Fabricated Sink Bowls Item #: Qty #: Model #: Project #: Includes Lead Free Compliant Faucet & K-6 Basket Drain(s) Flat Top, 1, 1-1/2 & 5 Backsplash Include Deck Mount Faucet Single Sink Bowl provided with K-50 Swing Spout Faucet Double Sink Bowls provided with K-53 Swing Spout Faucet 10 Backsplash Include Splash Mount Faucet Single & Double Sink Bowls provided with K-1 Swing Spout Faucet Splash Mount Faucet Available On 5 Backsplash - Add TA-11Z Flat Top w/ K-50 Deck Mount Faucet Shown 10 Backsplash w/ K-1 Splash Mount Faucet Shown Single Bowl Double Bowl Size Model# Model# A B TA-11A** TA-11A-2** 16 x 20 x 8 TA-11B** TA-11B-2** 16 x 20 x 12 TA-11C TA-11C-2 20 x 20 x 8 TA-11D* TA-11D-2* 20 x 20 x 12 TA-11E* TA-11E-2* 24 x 24 x 14 TA-11F TA-11F-2 10 x 14 x 10 TA-11J TA-11J-2 14 x 16 x 12 TA-11L TA-11L-2 18 x 24 x 14 TA-11N TA-11N-2 18 x 18 x 14 TA-11P TA-11P-2 20 x 24 x 14 TA-11Q TA-11Q-2 10 x 14 x 5 TA-11R* TA-11R-2* 24 x 36 x 14 TA-11S* TA-11S-2* 20 x 30 x 14 TA-11T* TA-11T-2* 24 x 30 x 14 * Only Installed In Tables 30 Wide or Wider ** Bowls Are Turned In 24 Wide Tables K-50 Swing Spout Faucet (Double Bowl) FLAT TOP, 1 or 1-1/2 REAR SPLASH 4" O.C. 5 REAR SPLASH with 1 RETURN 4" 1" O.C. 6" 10 REAR SPLASH with 2 RETURN 2" B B B 3" 6" A 3" 6" A A 10 REAR SPLASH with RETURN K-2B K-2C K-2D K-2E K-2F K-2J K-4 K-5 K-12 K-15 K-50 K-50OMIT K-52 K-52OMIT K-53 K-54 K-54A Faucets & Accessories Poly-Vance Sink Cutting Board for 14 x 16 Bowls K-55 Poly-Vance Sink Cutting Board for 16 x 20 Bowls K-60 Poly-Vance Sink Cutting Board for 18 x 24 Bowls K-62 Poly-Vance Sink Cutting Board for 20 x 20 Bowls K-105 Poly-Vance Sink Cutting Board for 24 x 24 Bowls K-112 Poly-Vance Sink Cutting Board for 18 x 18 Bowls K-316-LUHA Lever Drain Bracket K-350 Lever Drain K-452 Deck Mounted Soap Dispenser K-453 Lever Drain With Overflow K-460 8 Deck Mounted 4 O.C. Swing Spout Faucet K-461 Omit Swing Spout K-470 3 1/2 Spout Deck Mounted 4 O.C. Gooseneck Faucet K-472 Omit Swing Spout Gooseneck Faucet DTA-100 12 Deck Mounted 4 O.C. Swing Spout Faucet DTA-125 8-1/4 Water Filler Faucet 12 Water Filler Faucet 8 1/2 Spout 4 O.C. Deck Mounted Gooseneck Faucet 4 O.C. Splash Mounted Gooseneck Faucet X.H.D. 4 O.C. Deck Mounted Gooseneck Faucet 14 Splash Mounted 8 O.C. Faucet Extra Heavy Duty 12 Splash Mounted Faucets Wrist Handles For Splash Mounted Faucets Residential Finish & Packaging 6 x 9 Control Bracket 14 x 16 Control Bracket Installation Of Disposal Cone w/ 6 x 9 Control Bracket Installation Of Collar w/ 6 x 9 Control Bracket 14 Deep Bowls Faucet Hole Revision Prerinse Basket for 20 x 20 Bowls Prerinse Basket for 16 x 20 Bowls Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T. For Orders & Customer Service: For Smart Fabrication Quotes: Email: customer@advancetabco.com or Fax: 631-242-6900 Email: smartfab@advancetabco.com or Fax: 631-586-2933 www.advancetabco.com ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, DEC. 2016 REF-K Palm Beach Tennis Second Floor Profitable Food Facili es Page: 44

Advance Tabco SS 304 Item #118 STAINLESS STEEL WORK TABLES PREMIUM Series - Flat Top - UNDERSHELF Style Item #: Qty #: Model #: Project #: FEATURES: Top is furnished with 1-5/8 sanitary rolled rim edges on front & back and square side edges. To reinforce and maintain a level working surface, 24 wide tables are supplied with TWO hat channels and 30 and 36 wide tables are supplied with THREE hat channels. Pre-engineered welded angle adapters insure ease of future drawer installation. Aluminum die cast leg-to-shelf clamp secures shelf to leg eliminating unsightly nuts & bolts. Undershelf is adjustable. CONSTRUCTION: All TIG welded. Exposed weld areas polished to match adjacent surfaces. Entire top mechanically polished to a satin finish. Top is sound deadened. Roll formed embossed galvanized hat channels are secured to top by means of structural adhesive and weld studs. Gussets welded to support hat sections. SS-Series: Stainless Steel Legs & Undershelf 24 30 36 L Wide Wide Wide 30 24 36 48 60 72 84 96 108 120 132 144 SS-240 SS-242 SS-243 SS-244 SS-245 SS-246 SS-247 SS-248 SS-249 SS-2410 SS-2411 SS-2412 SS-300 SS-302 SS-303 SS-304 SS-305 SS-306 SS-307 SS-308 SS-309 SS-3010 SS-3011 SS-3012 SS-363 SS-364 SS-365 SS-366 SS-367 SS-368 SS-369 SS-3610 SS-3611 SS-3612 NEW Rolled Rim Edges on Front & Back and Square Side Edges MATERIAL: SS-SERIES: Stainless Steel Legs & Undershelf TOP: 14 gauge stainless steel type 304 series. SHELF: 18 gauge stainless steel. LEGS: 1 5/8 diameter tubular stainless steel. 1 adjustable stainless steel bullet feet. Stainless steel gussets. GLG-SERIES: Galvanized Legs & Undershelf TOP: 14 gauge stainless steel type 304 series. SHELF: 18 gauge galvanized steel. LEGS: 1 5/8 diameter tubular galvanized steel. 1 adjustable plastic bullet feet. Galvanized steel gussets. GLG-Series: Galvanized Steel Legs & Undershelf 24 30 36 L Wide Wide Wide 30 24 36 48 60 72 84 96 108 120 132 144 GLG-240 GLG-242 GLG-243 GLG-244 GLG-245 GLG-246 GLG-247 GLG-248 GLG-249 GLG-2410 GLG-2411 GLG-2412 GLG-300 GLG-302 GLG-303 GLG-304 GLG-305 GLG-306 GLG-307 GLG-308 GLG-309 GLG-3010 GLG-3011 GLG-3012 Featuring as Standard: THE PROVEN ORIGINAL ADVANCE TABCO Adjustable Undershelf with Die Cast Leg Clamp GLG-363 GLG-364 GLG-365 GLG-366 GLG-367 GLG-368 GLG-369 GLG-3610 GLG-3611 GLG-3612 www.advancetabco.com Create Your Own Efficient Workstation with the Available Standard Accessories (Visit Section K) Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T. Email Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933 NEW YORK GEORGIA TEXAS NEVADA Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 45 H-2

Advance Tabco SS 304 Item #118 DIMENSIONS and SPECIFICATIONS ALL DIMENSIONS ARE TYPICAL TOL ±.500 All Units Shipped Unassembled (KD) for Reduced Shipping Costs. SS & GLG Series Undershelf Style FLAT TOP Finished size of undershelf = Length minus 5 3/4 Width minus 5 3/4 Units 8 ft. and larger are furnished with six (6) legs SS-Series: Stainless Steel Legs & Undershelf 24 Wt. 30 Wt. 36 L Wt. Wide Wide Wide 30 24 36 48 60 72 84 96 108 120 132 144 SS-240 SS-242 SS-243 SS-244 SS-245 SS-246 SS-247 SS-248 SS-249 SS-2410 SS-2411 SS-2412 49 lbs. 31 lbs. 64 lbs. 79 lbs. 92 lbs. 109 lbs. 130 lbs. 145 lbs. 161 lbs. 261 lbs. 293 lbs. 308 lbs. SS-300 SS-302 SS-303 SS-304 SS-305 SS-306 SS-307 SS-308 SS-309 SS-3010 SS-3011 SS-3012 65 lbs. 55 lbs. 72 lbs. 89 lbs. 107 lbs. 125 lbs. 148 lbs. 166 lbs. 176 lbs. 287 lbs. 324 lbs. 339 lbs. SS-363 SS-364 SS-365 SS-366 SS-367 SS-368 SS-369 SS-3610 SS-3611 SS-3612 88 lbs. 98 lbs. 118 lbs. 138 lbs. 164 lbs. 184 lbs. 190 lbs. 308 lbs. 358 lbs. 373 lbs. GLG-Series: Galvanized Steel Legs & Undershelf 24 Wt. 30 Wt. 36 L Wt. Wide Wide Wide 30 24 36 48 60 72 84 96 108 120 132 144 GLG-240 GLG-242 GLG-243 GLG-244 GLG-245 GLG-246 GLG-247 GLG-248 GLG-249 GLG-2410 GLG-2411 GLG-2412 49 lbs. 31 lbs. 64 lbs. 79 lbs. 92 lbs. 109 lbs. 130 lbs. 145 lbs. 161 lbs. 261 lbs. 293 lbs. 308 lbs. GLG-300 GLG-302 GLG-303 GLG-304 GLG-305 GLG-306 GLG-307 GLG-308 GLG-309 GLG-3010 GLG-3011 GLG-3012 65 lbs. 55 lbs. 72 lbs. 89 lbs. 107 lbs. 125 lbs. 148 lbs. 166 lbs. 176 lbs. 287 lbs. 324 lbs. 339 lbs. GLG-363 GLG-364 GLG-365 GLG-366 GLG-367 GLG-368 GLG-369 GLG-3610 GLG-3611 GLG-3612 88 lbs. 98 lbs. 118 lbs. 138 lbs. 164 lbs. 184 lbs. 190 lbs. 308 lbs. 358 lbs. 373 lbs. H-2a 200 Heartland Boulevard, Edgewood, NY 11717-8380 ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, SEPTEMBER 2005 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 46

Advance Tabco TA 366A Item #118 TABLE MODIFICATIONS & ACCESSORIES TOP MODIFICATIONS TA-56 5 NSF Partition QTY. CDR-5 TA-1 TA-3 TA-7 TA-8 TA-10 TA-12 TA-22 TA-28 TA-29 TA-30 TA-30A TA-31 TA-32 TA-34 TA-34A TA-35 TA-41 TA-56 TA-56A TA-57 TA-57A TA-57B TA-58 TA-64 TA-75 TA-76 TA-79 TA-82 TA-84 TA-87 TA-91 Condiment Holder (Accommodates 5 Bins) Notch Backsplash For Roll Up Door w/ Pass-Thru Stainless Steel Hat Channel & Gusset Upgrade 10 Partial Splash Column Notch in Rear Splash (Includes Splash) 5 Partial Splash Countertop Edge Square Edge Table Cut-Out For Cold Well. Incudes Louvered Doors 16 Ga. 304 Rear Splash Capping Strip w/adhesive Backing 1-1/2 Side Splash 1-1/2 Turn Up For Table Tops 5 Side Splash 10 Side Splash Top Cut-Out Top Cut-Out for Undermount Well Splash Cut-Out Poly-Vance 5/8 Cutting Board 5 NSF Partition 18 NSF Partition Prepare Welded Field Joint (Welded in field by others) Bolted Field Joint (Bolted in field by others) Hairline Field Joint Stepdown to 24 Working Height Urn Trough (Factory installation only) Mitered Edge Paint on Sound Deadening Flour Trough (Factory installation only) Scrap Chute (6 dia. opening) Simple Pass-Thru Enclosed Rear Splash TA-523 Drop-In Urn Trough Poly Retaining Clips Includes TA-22 (S/S top table) CDR-5 Condiment Holder TA-84 Pass-Thru TA-108 Grommet For Cords QTY. TA-93 Wall Brackets (Includes 2. For 5 & 10 1/2 splash only) TA-96A Can Opener Provision for Openers with Bolt-on Base (Customer to provide location) TA-96B Can Opener Surface Mount Provision with 4 S/S Tube for Openers w/o Base (Customer to provide location) Can Opener Spacer Plate Provision for Use on Tables TA-96C With Countertop Edge & Can Opener Base (Customer to provide location) TA-100 Bull Nose All Sides of Worktable TA-101 Rear Tray Lock TA-106 Mirror HI-LITE Edge TA-107 Vacuum Breaker Holes on Tables (Includes Backsplash with 2 Return) TA-108 2 Hole with Grommet for Appliance Cord TA-112 Hubble Outlet TA-113 Notch Top for Buyout Unit TA-130 Cutlery Dispenser Holder (Undercounter Mounted) TA-135 Plate Shelf (Undercounter Mounted) TA-366A Heavy duty Understructure Top Install Advnace Tabco Hot Food Unit In Work Table Top TA-502 (Requires TA-34 Top Cut-Out & TA-27 Control Panel. Does not include wiring. Consult factory) TA-521 Drop-In urn Trough 1 TA-522 Drop-In urn Trough 2 TA-523 Drop-In urn Trough 3 TA-524 Drop-In urn Trough 4 TA-525 Drop-In urn Trough 5 TA-526 Drop-In urn Trough 6 TA-527 Drop-In urn Trough 7 TA-528 Drop-In urn Trough 8 TA-529 Drop-In urn Trough 9 TA-550 Install Customer Supplied Buyout Items (Does not include wiring. Consult factory) TA-551 Installation of Hot Food Wells. (Requires TA-34 Top Cut-Out & TA-27 Control Panel. Does not include wiring. Consult factory) www.advancetabco.com Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T. For Orders & Customer Service: Email: customer@advancetabco.com or Fax: 631-242-6900 For Smart Fabrication Quotes: Email: smartfab@advancetabco.com or Fax: 631-586-2933 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 47 REF-K

Advance Tabco TA 366A Item #118 TABLE MODIFICATIONS & ACCESSORIES BASE MODIFICATIONS TA-39 Louvered Hinged Doors TA-73 Drop-Down Tray Slide TA-74 Solid Tray Slide TA-900 ADJ. Height Tables TA-116 Adj. Mid-Shelf QTY. TA-4 Removable Access Panel QTY. TA-48 12 x12 Cut-Out in Back Panel/Undershelf for Plumbing TA-4A Luvered Panel TA-54 Removable Kick Plate TA-5 Curb Mounting Provision TA-55 Remove Back Panel (on Enclosed Base) TA-15 TA-23 TA-24 TA-27 TA-36A Provision for Built In Drawer Warmer Welded Set-Up Table/Crating Shell Crating Control Panel (Must add TA-34A or TA-34B) Sliding/Hinge Stainless Steel Doors TA-63 TA-70 TA-73 TA-74 Removable Shelving (In addition to standard shelf & table width) S/S Tubular Tray Divider (12 sections) Tubular Tray Slide w/dropdown (Stationary Tray Slide Available. Factory installation only) Solid Tray Slide TA-36B 1/2 Height Stainless Steel Hinge Doors TA-92 12 Apron (in front of sink) TA-36C TA-37 TA-39 TA-40 TA-42 TA-43 TA-44 TA-45 TA-46 Hinged door with Trash Flap Stainless Enclosed Base 24 Louvered Hinged Doors Remove Undershelf in Cabinet Base For Slide in Buyout Interior Partition (2.5 x30 ) Filler Panel (3 x30 with Flanged Feet) K.D. Aluminum Pan Rack Slides (6 slides. Table min. lgth. 30 ) K.D. Aluminum Glass Rack Slides (3 slides. Table min. lgth. 3 feet) Door Locks TA-92A TA-116 TA-130 TA-135 TA-205 TA-900 17 Stainless Steel Apron to Cover Sink Bowls and Support Lever Drain Handles Adjustable Enclosed Base Cabinet Mid Shelf- Add to Price of Enclosed Base Table with Fixed Mid Shelf (M). Shelves Over 36 In Length Require Multiple Sections With Center Partition. For Partial Shelves Add To Price Of Shelf. Cutlery Dispenser Holder (Undercounter Mounted) Plate Shelf (Undercounter Mounted) Connect Cafeteria Items (Per Joint Between 2 Tables. Requires Casters) Upgrade Table To be Height Adjustable In Field (Up to 6 Only. Unit Ships Set Up) ELECTRICAL & DATA PORT OUTLETS TA-62 Duplex Outlet TA-62A GFI Duplex Outlet TA-62D GFI Doghouse Outlet TA-112 Hubble Outlet QTY. TA-62 Standard Duplex Electrical Outlet & Cover Plate (Under Flat Top). NEMA 5-15R TA-62A GFI Duplex Outlet & Cover Plate in a VKS Splash. NEMA 5-20R TA-62C GFI Duplex Outlet & Cover Plate Below Shelf Top. NEMA 5-20R QTY. TA-62D GFI Duplex Outlet & Cover Plate in a Doghouse. NEMA 5-20R TA-62E Upgrade Outlet to a NEMA 6-20R or Equiv. TA-112 Hubble Outlet TA-622 CAT-5 Data Port Outlet. Cable Not Included Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T. www.advancetabco.com For Orders & Customer Service: Email: customer@advancetabco.com or Fax: 631-242-6900 For Smart Fabrication Quotes: Email: smartfab@advancetabco.com or Fax: 631-586-2933 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 48 REF-K

Advance Tabco TA 366A Item #118 TABLE MODIFICATIONS & ACCESSORIES OVERSHELF & POT RACK MODIFICATIONS TA-9A 1 Turn Up TA-22A Square Edge TA-71 Heat Lamp Mounting Provision TA-100A Bull Nose TA-102 24 x 24 Extension QTY. TA-9A Partial 1 Turn-Up for all Table Mt. Shelves TA-22A Square Edge on Overshelf TA-26-10 Welded Wall Shelf Brackets for 10 Wide Shelf TA-26-12 Welded Wall Shelf Brackets for 12 Wide Shelf TA-26-15 Welded Wall Shelf Brackets for 15 Wide Shelf TA-26-18 Welded Wall Shelf Brackets for 18 Wide Shelf TA-47 Shelf Mounting Bracket for Existing Table TA-49 Wall Shelf 2 Offset TA-60 Special Sizing Charge for Shelves (Must Order Larger Unit to be Cut Down to Smaller Size) TA-71 Heat Lamp Mounting Provision TA-71A Heat Lamp Remote Control Bracket TA-78 Additional Lin. Ft. Past 12 For Table Mt. Shelf (For ODS, OTS, TS, DS & WS Shelving only) TA-77 Check Minder Shelf Provision (Factory install only) TA-83 Spice Bins QTY. TA-84A Knife Rack for Rolled Rim Tables TA-84B Knife Rack for Poly Top Tables TA-84C Knife Rack for Square Edge Tables TA-86 Stainless Steel Pot Hooks TA-89 Double Sided Plated Pot Hooks (Package of 4) TA-89A Single Sided Plated Pot Hooks (Package of 4) TA-98 Stainless Steel Flat Bar in lieu of Chain TA-99 16 Ga. S/S 304 Upgrade for Wall & Over Shelves TA-100A Bull Nose All Sides of Shelf TA-100R Bull Nose Three Sides of Shelf w/ Rear Turn Up TA-102 TA-103 TA-104 24 x 24 Extension for Microwave or Computer Shelf (Add to OTS and ODS Shelves. See page 65) 24 Wide PT Shelf (36 Min Length. Mid mount only. PT Series Shelf, See Pg. 73. Add to 18 Wide Shelf) Additional Length Over 12 (Add to 18 Shelf. (PA & CU Shelving Only. Max. Length is 14 as Single Piece) UNDERSHELF MODIFICATIONS QTY. TA-9 1-1/2 Turn-Up for Undershelves TA-17 Upgrade Undershelf to a Marine Edge (Must add TA-23) TA-48 12 x12 Cut-Out in Back Panel or Undershelf for Plumbing QTY. TA-94 Upgrade 16 Ga. 304 S/S Undershelf TA-94A Upgrade 14 Ga. 304 S/S Undershelf TA-366 Reinforced Understructure For Undershelves SIZE MODIFICATIONS QTY. TA-33 Special Working Height TA-59 36 Wide Equipment Stand TA-6 Extra Length for Standard Tables Over 12 (Tables Over 14 Require Field Joint TA-57) TA-61 Special Sizing Charge (Larger Unit Cut Down to Smaller Size) TA-61A Special Modification Charge QTY. TA-65 Enclosed Base Units Over 12 (Open Base Table) TA-66 Enclosed Base Units Over 12 (Sliding Door Units) TA-67 Enclosed Base Units Over 12 (Hinged Door Units) TA-105 Modify Enclosed Base Table w/ Drawers to 24 Width TA-110 Modify Enclosed Base Table w/ Drawers to 36 Width www.advancetabco.com Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T. For Orders & Customer Service: Email: customer@advancetabco.com or Fax: 631-242-6900 For Smart Fabrication Quotes: Email: smartfab@advancetabco.com or Fax: 631-586-2933 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 49 REF-K

Advance Tabco TA 366A Item #118 TABLE MODIFICATIONS & ACCESSORIES LEG MODIFICATIONS QTY. TA-16 1 Galvanized Leg with Plastic Bullet Foot (34 1/2 Total Length) TA-16-4 4 Galvanized Legs with Plastic Bullet Feet (34 1/2 Total Length) TA-16-6 6 Galvanized Legs with Plastic Bullet Feet (34 1/2 Total Length) TA-19 Stainless Steel Flanged Bullet Foot For Work Table TA-19L S/S Bolt-on Leg w/ Flanged Foot For Enclosed Base Table TA-20 1 Stainless Steel Leg with S/S Bullet Foot (34 1/2 Total Length) TA-20-4 4 Stainless Steel Leg with S/S Bullet Feet (34 1/2 Total Length) QTY. TA-20-6 6 Stainless Steel Leg with S/S Bullet Feet (34 1/2 Total Length) TA-20L Replacement Bolt-on Leg For Enclosed Base Table TA-21 Stainless Steel Bullet Foot TA-68 Relocate Rear Cross Rail To Center (for Open Base Tables Only) TA-72 Leg to Wall Brace (Set per table) TA-95 Upgrade 16 Ga. 304 S/S Legs Only WORK TABLE CASTERS Standard Casters Maintains the Standard 35-1/2 Working Height 200 lbs. Load Capacity Per Caster When Used w/ Stainless Steel Legs TA-25S-4 Set of 4 (Two with Brakes) TA-25S-6 Set of 6 (Two with Brakes) When Used w/ Galvanized Legs TA-25G-4 Set of 4 (Two with Brakes) TA-25G-6 Set of 6 (Two with Brakes) Replacement Casters TA-25 Set of 4 (Two with Brakes) TA-25A Set of 6 (Two with Brakes) 200 lbs. Load Capacity Per Caster For Work Tables TA-25B Set TA-25C Per Caster Optional Standard Caster Upgrades: For brakes on all wheels (Standard Casters) - Add price to the following models: TA-25, TA-25A, TA-25S-4, TA-25S-6, TA-25G-4, TA-25G-6 Upgrade Standard Caster with Heavy Duty Urethane Wheels (Per Caster) EQUIPMENT STAND CASTERS Standard Casters 5 Urethane Wheels. Maintains the Standard 24 Working Height 200 lbs. Load Capacity Per Caster HEAVY DUTY Casters 5 Urethane Wheels 400 lbs. Load Capacity Per Caster Enclosed Base Table Casters Easy Bolt-On Style w/ Stainless Steel Legs TA-25ES Set of 4 (Two with Brakes) w/ Galvanized Legs TA-25EG Set of 4 (Two with Brakes) TA-255 TA-256 Super Heavy Duty Set of 4 (Two with Brakes) Super Heavy Duty Set of 6 (Two with Brakes) TA-255P Set of 4 (Two with Brakes) TA-255AP Set of 6 (Two with Brakes) 300 lbs. Load Capacity Per Caster Optional Equipment Stand Caster Upgrade: TA-255B For brakes on all wheels (Equipment Casters) - Add price to any of the following models: TA-255, TA-256, TA-25ES, TA-25EG For brakes on all wheels (Enclosed Base Casters) - Add price to models: TA-255P or TA-255AP TA-255PB Contact Our SMART FABRICATION Department for more information at 800-645-3166 or email in your specifications to smartfab@advancetabco.com REF-K 200 Heartland Boulevard, Edgewood, NY 11717-8380 ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, FEBRUARY 2017 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 50

Hatco DL 775 Item #119 Project Item # Decorative Lamps/ Luminaires Models: DL or DLH-400, -500, -600, -700, -725, -750, -760, -775, -800, -1100, -1200, -1300, -1400, -1500 Hatco Decorative Lamps provide radiant heat to briefly hold food warm at kitchen work areas, wait staff pickup stations or customer serving points, while enhancing your décor. Versatile enough for almost any location, the range of lights are available with a selection of unlimited personalized choices. In addition to food warming, configurations for display lighting are offered as well. Standard features Luminaire (Low Watt), Standard and High Watt bulbs available (bulb not included in unit price) Models available in fourteen lamp shade styles Eight different mounting arrangements to choose from Four switch options Available for food holding and display or lighting only applications Track Adapter available in 120 volt only NOTE: Decorative Lamps (DL and DLH Series) are non-returnable. Build Your Decorative/Luminaire Lamp in Six Easy Steps (not for retrofit-bulb not included) Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Electrical Mounting Style Switch Location Shade Style Shade and Canopy Colors Overall Length You can develop your own Hatco Decorative Lamp solutions with our online lamp configurator. Visit "www.hatcocorp.com" and click on Build a Lamp Quantity (From left to right) DL-700-AU, -800-CTR, -750-CL, -400-SU, -725-SU, -775-RL, -600-SL, -500-SU, -760-SL, -1200-SR, -1300-RL, -1100 CR, -1500-CT and -1400-CU Options (available at time of purchase only) Designer Colors (Exception: DL-1500) c Warm Red c Black c Gray Granite c White Granite c Navy Blue c Hunter Green c Antique Copper Gloss Finishes (Exception: DL-1500) c Smooth White c Gleaming Gold c Glossy Gray c Bold Black Gloss Finishes* for Shade Only (Exception: DL-1500) c Radiant Red c Brilliant Blue c Clear Brushed Metal Plated Finishes* (Exception: DL-1500) c Bright Brass c Bright Nickel c Bright Copper c Antique Nickel c Antique Brass c Antique Bronze DL-1500 Color Combinations only c Designer Finishes Black/Antique Copper/Black c Gloss Finishes Bold Black/Radiant Red/Bold Black* c Gloss Bold Black/Plated Bright Nickel/Gloss Bold Black* c Gloss Bold Black/Plated Antique Nickel/Gloss Bold Black* c Gloss Bold Black/Plated Bright Copper/Gloss Bold Black* *Special process required and extended lead times Cord Color (C=Cord, R=Retractable Mounts only) c Black (Standard) c White c Luminaire Lighting (200W bulb maximum, not included) Extended Electrical Leads For any SU, SL or SR mount unit, must specify lead length) c 1'-5' (305-1524 mm) c 6'-10' (1829-3048 mm) c 11'-15' (3353-4572 mm) c 16'-20' (4877-6096 mm) Accessories Track Mount Bar - (120V only, maximum 16 amps per any length of track) c 4' (1219 mm) Black c 4' (1219 mm) White c 8' (2438 mm) Black c 8' (2438 mm) White c 12' (3657 mm) - one 8' (2438 mm) plus one 4' (1219 mm) with Coupler, Black c 12' (3657 mm) - one 8' (2438 mm) plus one 4' (1219 mm) with Coupler, White c 16' (4876 mm) - Two 8' (2438 mm) with Coupler, Black c 16' (4876 mm) - Two 8' (2438 mm) with Coupler, White Additional Track Installation and Modification Kit c Black c White c 16 Amp Lamp Toggle Switch Coated Bulbs for Luminaire models only c 120V, 60W Clear c 240V, 60W Clear Coated Bulbs c 120V, 250W Clear c 240V, 250W Clear c 120V, 250W Red Coated Bulbs for DLH models only c 120V, 375W Clear Uncoated Bulbs c 120V, 250W Clear c 240V, 250W Clear c 120V, 250W Red Uncoated Bulbs for DLH models only c 120V, 375W Clear HATCO CORPORATION l P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A. (800) 558-0607 l (414) 671-6350 l www.hatcocorp.com l equipsales@hatcocorp.com l intlsales@hatcocorp.com Form No. DL, DLH Spec Sheet Page 1 of 2 February 2018 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 51

Hatco DL 775 Item #119 Decorative Lamps/Luminaires Models: DL or DLH-400, -500, -600, -700, -725, -750, -760, -775, -800, -1100, -1200, -1300, -1400, -1500 ORDERING INSTRUCTIONS Please refer to the six steps in the Hatco Foodservice Equipment Price List or go online at www.hatcocorp.com and click on Build A Lamp. This will help you in choosing the correct configuration for your specific needs. PU Step 1-Electrical Model s Step 2-Mounting Style CORD PIVOT ARM CU CL Maximum Watt Bulb (Not included) Voltage Single Phase Ship Weight DL- (Luminaire) 200 120, 240 6-10 lbs. (3-5 kg) DL- (Standard) 250 120, 240 6-10 lbs. (3-5 kg) DLH- (High Watt) 375 120, 240 6-10 lbs. (3-5 kg) s Not field convertible Depending on components Shade Height plus 1.75" (44 mm) " ) (124 mm) 4.875" 4.875" (124 mm) MOUNTING STYLES A Mount Rigid Mount to canopy with pivot. P Mount Rigid Mount to canopy with pivot. C Mount Cord Mount to canopy. CT Mount 6 Cord Mount to track adapter. 7"-20" 178-508 mm 2.412" (61 mm) PL CU CL CTL AU (124 mm) 4.875" 4.875" (124 mm) 4.875" (124 mm) PU Shade Height plus 1.75" (44 mm) SPECIFY the: Horizontal Stem Length Overall Length (from pivot to bottom of shade) Overall Length RTL 7"-20" 178-508 mm Shade Height plus 1.75" (44 mm) AU Shade Height 8.5" H (216 mm) 4.875" (124 mm) RTL RL 10.5" H (267 mm) 7 to 20" (178 to 508 mm) Overall Length: 17" to 30" (432 to 762 mm) 17" to 71" (432 to 1803 mm) 17" (432 mm) to any length Overall Length: 19" to 32" (483 to 813 mm) 7"-20" 178-508 mm AU 19" to 73" (483 to 1854 mm) 4.875" (124 mm) RL Shade Height plus 1.75" (44 mm) RTL 2.412" (61 mm) PL 7"-20" 178-508 mm AU 4.875" (124 mm) Shade Height plus 1.75" (44 mm) RL 4.875" (124 mm) 2.412" (61 mm) (124 mm) 4.875" 4.875" (124 mm) (152 mm) 6" CU PL PU CL 19" (483 mm) to any length (152 mm) 6" RETRACTABLE CORD STEM SU SL MOUNTING STYLES R Mount Retractable Cord Mount. RT Mount 6 Retractable Cord Mount PU to track adapter. S Mount Rigid Stem Mount to canopy. (124 mm) 4.875" ST Mount 6 Rigid Stem Mount to track adapter. CU CL RTL 2.412" (61 mm) PL 7"-20" 178-508 mm (152 mm) 6" (124 mm) 4.875" (124 mm) 4.875" CTL SU SL STL AU 4.875" (124 mm) PU SPECIFY the: 4.875" (124 mm) Adjusts to a maximum and minimum according to shade height 2.412" (61 mm) PL SU PU (787 to SL 1765 mm) (152 mm) 6" CTL RL STL Overall Length CU CL (124 mm) 4.875" Shade Height 8.5" H (216 mm) 4.875" (124 mm) (124 mm) 4.875" 31" to 69½" 33 3 / 8" to 71 7 / 8" (848 to 1826 mm) 14" to 71" (356 to 1803 mm) 17" to 71" (432 to 1803 mm) CTL 10.5" H (267 mm) CU CL STL 33" to 71½" (838 to 1816 mm) 35 3 / 8" to 73 7 / 8" (899 to 1876 mm) SU SL 16" to 73" (483 to 1854 mm) 19" to 73" (483 to 1854 mm) (124 mm) 4.875" (124 mm) 4.875" (124 mm) Step 5-Switch Location 4.875" 6 NOTE: Lamp shade diameter and wattage may limit number of lamps per track Maximum 1920 watts or 16 amps per any length of track. To assure warranty coverage, do not install track systems in damp or wet locations (including above steam tables). SU (N)-None SL Supplied by installer (L)-Lower STL Switch (Horizontal toggle) Not available on: DLH (High Watt models) A Mount (R)-Remote Switch Accommodates 16 amps Up to seven 250W lamps, or five 375W lamps maximum per remote switch (U)-Upper Switch Not available on: DLH (High Watt models) R Mount Track Mounts (CT, RT, ST) 4.875" (124 mm) HATCO CORPORATION l P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A. (800) 558-0607 l (414) 671-6350 l www.hatcocorp.com l equipsales@hatcocorp.com l intlsales@hatcocorp.com Form No. DL, DLH Spec Sheet Page 2 of 2 February 2018 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 52

Hatco DL 775 Item #119 Decorative Lamps/Luminaires Models: DL or DLH-400, -500, -600, -700, -725, -750, -760, -775, -800, -1100, -1200, -1300, -1400, -1500 Step 4-Shade Style (height and width shown) 8.5" (216 mm) 6.125" (156 mm) -400 6.125" (156 mm) -500 6.25" (159 mm) -600 6.5" (165 mm) -700 9.5" (241 mm) -725 11" (279 mm) -750 12.5" (318 mm) -760 10.5" (267 mm) -775 11" (279 mm) -800 8.5" (216 mm) 10.5" (267 mm) 6.5" (165 mm) -1100 (Cylinder) 7" (178 mm) -1200 (Square) 11.54 " (293 mm) -1300 (Triangular) 7" (178 mm) -1400 (Octagonal) 6.67" (169 mm) -1500 Step 3-Shade and Canopy Colors - Click on www.hatcocorp.com (Order Literature/Brochures/Sales Literature/Color Chip Chart) or see the Hatco Price List for color representations. Designer colors: Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter Green, Antique Copper Gloss Finishes: Smooth White, Gleaming Gold, Glossy Gray, Bold Black Gloss Finishes* for Shade Only: Radiant Red, Brilliant Blue, Clear Brushed Metal Finish Plated Finishes*: Bright Brass, Bright Nickel, Bright Copper, Antique Nickel, Antique Brass and Antique Bronze Exception: DL-1500 in these color options only Designer Black/Antique Copper/Black Gloss Bold Black/Plated Bright Nickel/Gloss Bold Black* (shown) Gloss Bold Black/Plated Antique Nickel/Gloss Bold Black* Gloss Bold Black/Plated Bright Copper/Gloss Bold Black* Gloss Bold Black/Radiant Red/Bold Black* *Special Process Required and Extended Lead Times Step 6-Overall Unit Length For C, CT, S or ST Mounts: From ceiling to bottom of warmer lamp shade (#6 in drawing). For A or P Mounts: From center of shade to wall plus vertical shade length to the nearest whole number (see line art in mounting styles). For Clearance: See "Clearance Requirements" in the Hatco Price List Ordering Instructions. Ceiling Overall Unit Length Overall Clearance Countertop Floor PRODUCT SPECS Decorative Lamps/Luminaires The Decorative Lamp shall be a Hatco Model as manufactured by the Hatco Corporation, Milwaukee, WI 53234 U.S.A. The Decorative Lamp shall be rated at watts, volts, and inches (millimeters) in overall width. It shall consist of a vented lamp shade and mounting. Switch locations can be upper, lower, remote or supplied by installer. Bulb options are uncoated or coated, clear or red, 60W clear, 250W (DL models) or 375W (DLH models). Warranty consists of 24/7 parts and service assistance (US and Canada only). HATCO CORPORATION l P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A. (800) 558-0607 l (414) 671-6350 l www.hatcocorp.com l equipsales@hatcocorp.com l intlsales@hatcocorp.com Form No. DL, DLH Spec Sheet Page 3 of 3 February 2018 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 53

Alto Shaam 1000 UP Item #120 Item no. 1000-UP Series Low Temperature Hot Food Holding Cabinets l Halo Heat a controlled, uniform heat source that gently surrounds food for better appearance, taste, and longer holding life. l Holds hot food hot...meat, poultry, fish, potatoes, casseroles, vegetables, rolls, etc. l Dual purpose both a holding cabinet and dough proofer. l Close temperature tolerance and even heat application maintain ideal serving temperatures throughout the cabinet. l Two individually controlled, insulated warming compartments give the benefit of holding at two different temperatures. l Stainless steel interior resists corrosion. l Available in reach-in or pass-through design. l Casters provide easy mobility. l Antimicrobial handle retards the growth of illness-causing pathogens. l Digital control senses temperature drops faster, providing quick heat recovery time. l Door venting holds crispy food better. Short Form Spec Alto-Shaam double compartment 1000-UP hot food holding cabinet is constructed with a stainless steel exterior and stainless steel doors with magnetic latch. Each compartment has a Simple control with on/off power switch; up and down arrow buttons with a temperature range of 60 F to 200 F (16 C to 93 C); heat indicator light; temperature display buttons, and digital display. Included are four (4) chrome plated side racks spaced at 2-15/16" (75mm) centers, and one (1) set of 5" (127mm) heavy duty casters 2 rigid and 2 swivel with brake. Model 1000-UP Double cavity hot food holding cabinet Model 1000-UP/P Double cavity proofing cabinet with window doors Deluxe Control Option Solid state electronic control option simplifies temperature setting and has a clear, easy-to-read LED display and includes our patented SureTemp heat recovery system. SureTemp reacts immediately to compensate for any loss of heat whenever the door is opened. Deluxe control is also available with six independent multiple timers for each compartment to facilitate first-in, first-out concept. Deluxe control with internal temperature probe. IP X4 Factory-Installed Options Electrical Choices 120V 208-240V 230V Cabinet Choices Reach-In, standard Pass-Through, optional Door Choices Solid Door, standard Window Door, optional Note: Window standard on proofing cabinet Door Swing Choices Right-hand swing, standard Left-hand swing, optional Note: Pass-through cabinets cannot have all doors hinged on the same side. W164 N9221 Water Street P.O. Box 450 Menomonee Falls, Wisconsin 53052-0450 U.S.A. Phone: 262.251.3800 800.558.8744 U.S.A./CANADA Fax: 262.251.7067 800.329.8744 U.S.A. only www.alto-shaam.com Printed in the U.S.A. Due to ongoing product improvement, specifications are subject to change without notice. Palm Beach Tennis Second Floor Profitable Food Facili es Page: 54 # 3 8-1 0 / 1 6

Alto Shaam 1000 UP Item #120 1000-UP Series Low Temperature Hot Food Holding Cabinets 53-9/16" (1360mm) 34-1/2" (876mm) 25-1/16" (636mm) Electrical Connection Shown with Optional Bumper 51-9/16" (1309mm) 72-5/8" (1844mm) Cord Length: 120V - 9' (2743mm) 208-240V - 8' (2438mm) 230V - 8' (2438mm) Pass-Through Option Electrical Connection Dimensions: H x W x D Exterior: 75-13/16" x 23-15/16" x 32-11/16" (1924mm x 608mm x 804mm) Pass-Through Exterior (Option): 75-13/16" x 23-15/16" x 34-3/16" (1924mm x 608mm x 867mm) Interior (each compartment): 26-7/8" x 18-7/8" x 26-1/2" (682mm x 479mm x 673mm) 75-13/16" (1924mm) with 5" (127mm) casters* 6-13/16" (173mm) 23-3/8" (593mm) 22-9/16" (572mm) 20-1/2" (521mm) 23-15/16" (608mm) 34-3/16" (867mm) 17-1/16" (433mm) Electrical Connection Pass-Through Option 24-1/8" (613mm) 32-11/16" (804mm) *74-1/16" (1881mm) - with optional 3-1/2" (89mm) casters *75-5/8" (1921mm) - with optional 6" (152mm) legs 72-1/2" (1840mm) Electrical V Ph Hz A kw 120 1 60 16.0 1.9 NEMA 5-20P, 20A-125V Plug 208 1 60 7.0 1.4 NEMA 6-15P, 240 1 60 8.0 1.9 15A-250V Plug (U.S.A. only) 230 1 50/60 7.7 1.8 Plugs rated 250V CEE 7/7 Product\Pan Capacity (per compartment) CH2-16P BS 1363 AS/NZS 3112 120 lbs (54kg) maximum Volume maximum: 60 qts (76 liters) Full-Size Pans: Gastronorm 1/1: Four (4) 20" x 12" x 2-1/2" 530mm x 325mm x 65mm on optional wire shelves only Full-Size Sheet Pans: Eight (8) 18" x 26" x 1" Clearance Requirements Back 3" (76mm) Top 2" (51mm) Right Side, Left Side 1" (25mm) Weight Net: 282 lb (128g) Ship: (est.) 360 lb (163 kg) Carton Dimensions: (L x W x H) 35" x 35" x 82" (889mm x 889mm x 2083mm) Accessories Bumper, Full Perimeter 5009767 Casters, Stem - 2 rigid, 2 swivel w/brake 3-1/2" (89mm) 5008017 Door Lock with Key (each handle) LK-22567 Drip Pan with Drain, 1-11/16" (43mm) deep 5005616 Drip Pan without Drain, 1-7/8" (48mm) deep 11906 Legs, 6" (152mm), Flanged - set of four 5011149 Installation Requirements Appliance must be installed level. The appliance must not be installed in any area where it may be affected by steam, grease, dripping water, extreme temperatures, or any other severely adverse conditions. Appliances with casters and no cord or plug must be secured to the building structure with a flexible connector. Not factory supplied. Pan Grid, Wire, Chrome Plated Pan Insert 18" x 26" (457mm x 660mm x 25mm) PN-2115 Security Panel with Lock 5013934 Shelf, Stainless Steel, Reach-In Shelf, Stainless Steel, Pass-Through SH-2325 SH-2346 Water Reservoir Pan* 1775 Water Reservoir Pan Cover* 1774 * Included with proofing cabinet W164 N9221 Water Street P.O. Box 450 Menomonee Falls, Wisconsin 53052-0450 U.S.A. Phone: 262.251.3800 800.558.8744 U.S.A./Canada Fax: 262.251.7067 800.329.8744 U.S.A. only www.alto-shaam.com # 3 8-1 0 / 1 6 Due to ongoing product improvement, specifications are subject to change without notice. Printed in the U.S.A. Palm Beach Tennis Second Floor Profitable Food Facili es Page: 55

Pitco SG14RS Item #121 SOLSTICE Gas (SG) Series w/options SG14, 14R, 14T, 18 Fryer SG14 w/ standard Millivolt T-Stat STANDARD FRYER FEATURES & ACCESSORIES Tank - stainless steel construction Cabinet - stainless front, door and sides Solstice Burner Technology,No blower or ceramics Patented Self Cleaning Burner & Down Draft Protection (with upgraded controls, SSTC, Digital, Computer) SG14R w/ optional SSTC SG14T w/ optional Digital Control SG18 w/ optional I12 computer & front / rear casters Millivolt Thermostat (T-Stat) High Temperature safety limit switch Heavy duty 3/16 bottom door hinge 1 ¼ (3.2 cm) Full port drain valve for fast draining Separate Manual gas shutoffs, for front servicing Integrated flue deflector 9 (22.9cm) adjustable legs, easier access to clean Tube rack, allows crumbs & debris into cool zone Removable basket hanger, requires no tools Drain Line Clean out rod Drain extension Fryer cleaner sample packet Choice of basket options : 2-Twin Baskets 1-Full Basket (not available on 14T or Basket Lifts) Project Item No. Quantity APPLICATION For High Production Gas frying specify Pitco Solstice Gas Models SG14, 14R, 14T or SG18 tube fryers with the patented Solstice Burner Technology. The dependable blower free atmospheric heating system provides fast recovery to cook a variety of food products. The Solstice gas fryer comes standard with a millivolt thermostat, for melt cycle and boil mode choose the optional quick responding solid state thermostat with the matchless ignition system. The optional digital control and the elastic time computer are available and can be used with our optional labor saving highly reliable basket lift system. The patented self cleaning burner and down draft protection keeps your fryer tuned up for peak daily performance. MODELS AVAILABLE SG14 (40-50 lbs, 14 x14 fry area, 110 Kbtu/hr) SG14R (40-50 lbs, 14 x14 fry area, 122 Kbtu/hr) SG14T (20-25 lbs, 7x 14, 50 Kbtu/hr per side for this twin tank fryer, 100 Kbtu/hr total) SG18 (70-90 lbs, 18 x 18 fry area, 140Kbtu/hr) OPTIONS & ACCESSORIES (AT ADDITIONAL COST) Matchless Ignition with DVI drain valve interlock (included with Solid State T-Stat, Digital Control & Computer only) Solid State T-Stat (SSTC) (w/melt cycle & boil out mode) Digital Controller (2 timers w/melt cycle) Intellifry I-12 Computer (12 elastic timers w/melt cycle & boil out) Backup thermostat (only on Digital and I-12 computer) Basket Lift (must be ordered with Digital Control or Computer) (To meet AGA/CGA/CSA specification, must be ordered with casters & installed with flexible gas hose w/ restraining cable) Stainless Steel back (not available with basket lift) 9" (22.9 cm) adjustable, non-locking rear & front locking casters Flexible gas hose with disconnect and restraining cable Tank cover 3-Triple Baskets (not available on 14T or Basket Lifts) Splash Guard reversible (L/R) 6" 8" 12" 18" Work shelves call factory for specifications and availabilty. Fish Grids (not available on 14T) Institutional Prison security package BNB Dump Station, see BNB spec sheet for details L10-199 Filter Options Filter Drawer system see spec sheet L10-134 SoloFilter system see spec sheet L10-152 SPINFRESH see Spec Sheet L10-524 for details SOLSTICE GAS (SG) Series w/options SG14, 14R, 14T, 18 Fryer Pitco Frialator, Inc P.O. Box 501, Concord, NH 03302-0501 509 Route 3A, Bow, NH 03304 603-225-6684 FAX: 603-225-8497 www.pitco.com L10-294 Rev 1 04/12 Printed in the USA Palm Beach Tennis Second Floor Profitable Food Facili es Page: 56

Pitco SG14RS Item #121 SOLSTICE GAS (SG) Series w/options SG14, 14R, 14T, 18 Fryer SOLSTICE GAS (SG) Series w/options SG14, 14R, 14T, 18 Fryer G P 3/4 INCH GAS CONNECTION (CE 3/4 INCH BSP ADAPTOR ADDS 1 1/2 [3.8] TO CONNECTION) 6 FOOT (183 CM) POWER CORD (NEMA 5-15 PLUG 115VAC UNITS ONLY) G B C OPTIONAL 34 [86.3] IN [CM] 14 13 16 [37.7] 12 2 1 [31.7] A 9 [22.9] NOM. P 38 34 15 32 11 [97.4] 32 [87.6] INTEGRAL FLUE DEFLECTOR OPTIONAL BASKET LIFT 21 29 32 [55.6] INDIVIDUAL FRYER SPECIFICATIONS G A B C SG14 (R) SG14T 48 5/16 [122.8] SG18 52 5/16 [132.9] 15 5/8 [39.7] 19 5/8 [49.8] 4 1/4 [10.8] 6 1/4 [15.9] 10 1 2 [26.7] NOM. 11 16 [1.8] 1 13 32 [3.6] 4 3 8 [11.1] 46 1 8 [117.2] 54 13 32 [138.2] NOM. Model Frying Area Cook Depth Oil Capacity SG14 & 14R 14 x 14 in (35.6 x 35.6 cm) 3-1/4-5 in (8.3-12.7 cm) 40-50 Lbs (18-23 kg) SG14T per side 7 x 14 in (17.7 x 35.6 cm) 3-1/4-5 in (8.3-12.7 cm) 20-25 Lbs (9-11 kg) SG18 18 x 18 in (45.7 x 45.7 cm) 3-1/4-5 in (8.3-12.7 cm) 75 Lbs (34 kg) FRYER SHIPPING INFORMATION (Approximate) Model Shipping Weight Shipping Weight w B/L Shipping Crate Size H x W x L Shipping Cube SG14 & 14R SG14T per side 208 Lbs (95 kg) 230 Lbs (104 kg) 308 Lbs (140 kg) 330 Lbs (150 kg) 59 x 23 x 44 in (149.8 x 58.4 x 111.7 cm) 34.6 ft 3. (1.0m 3 ) SG18 226 Lbs (103 kg) 326 Lbs (149 kg) INSTALLATION INFORMATION GAS SYSTEM REQUIREMENTS ELECTRIC SYSTEM REQUIREMENTS (50/60 hz) Gas Type Store Supply Pressure * Burner Manifold Pressure Amps # of Cord 115V 208 / 220-240V Natural 7-10" w.c.(17.4 mbars/ 1.7 kpa) 4" w.c. (10 mbars / 1 kpa) Propane 11-13" w.c.(27.4 mbars/ 2.7 kpa) 10" w.c. (25mbars/2.4 kpa) Fryer 1 0.7 0.4 * Check plumbing / gas codes for proper gas supply line sizing to sustain burner pressure when all gas appliances are full on. CLEARANCES (Do Not Curb Mount) Front min. Floor min. Combustible material Non-Combustible material Fryer Flue Area 30" 6" Sides min. Rear min. Sides min. Rear min. Do not block / restrict flue gases from flowing into hood (76.2 cm) (15.25 cm) 6" (15.2cm) 6" (15.2cm) 0" 0" or install vent hood drains over the flue. SHORT FORM SPECIFICATION Provide Pitco Solstice Gas Model (SG xxx) tube fired high production gas floor fryer. Fryer shall be xx-xx lbs oil capacity, xxx Kbtu/hr, xx by xx fry area, SS peened tank, stainless front, door, sides. Blower Free atmospheric burner system, with millivolt thermostat (or specify optional upgraded controls: behind the door solid state t-stat w/ melt & boil mode or digital controller or computer controls: with matchless ignition, drain valve interlock or patented self clean burner and down draft protection), separate gas shut off, 3/4" npt rear gas connect, recessed cabinet back, 1-1/4" Full port drain, 3/16" bottom hinge. Provide options and accessories as follows: Pitco Frialator, Inc P.O. Box 501, Concord, NH 03302-0501 509 Route 3A, Bow, NH 03304 603-225-6684 FAX: 603-225-8497 www.pitco.com L10-294 Rev 1 04/12 Printed in the USA We reserve the right to change specifications without notice and without incurring any obligation for equipment previously or subsequently sold. Palm Beach Tennis Second Floor Profitable Food Facili es Page: 57

Imperial IRB 24 Item #122 BROILERS RADIANT COUNTER TOP Model Numbers IRB-24 IRB-30 IRB-36 IRB-48 IRB-60 IRB-72 IIRB-36 shown Stainless steel burners with both cast-iron and optional stainless steel radiants shown. Stainless steel burners and radiant combination creates a searing hot grate temperature. Durable cast aluminum with a vylox heat protection grip. RADIANT BROILER BURNER SYSTEM - Individually controlled 15,000 BTU/hr. (4 KW) stainless steel burners. - Burners are located every 6" (152 mm) with individual controls. - Removable, reinforced cast iron radiants prevent clogging of burners and provide even broiling. - Standard cast iron radiants provide maximum heat retention and intense surface temperatures. - Optional stainless steel radiants provide quick heat-up while minimizing flare-ups. TOP GRATES - Heavy duty cast iron top grates provide attractive char-broiler markings. - 3" x 22" (76 x 559) sections remove easily and safely for cleaning. - Slanted cooking surface provides a range of cooking temperatures. - All grates are in sections to remove easily and safely for cleaning. - Slanted cooking surface provides a range of cooking temperatures. - Each top grate blade has a cast-in grease trough that allows excess fat to flow to the front grease gutter minimizing flare-up. - No tools are needed to remove grates, radiant covers and stainless steel burners for cleaning. EXTERIOR FEATURES - Stainless steel front, sides and landing ledge for cleanability and professional look. - Welded and polished stainless steel seams. - Range Match profile when placed on a refrigerated base or equipment stand. - Large 5" (127 mm) stainless steel landing ledge is ideal for plating. - Control knobs are durable cast aluminum with a vylox heat protection grip. - Full width grease gutter and large capacity removable drip pan. - Insulated throughout cooktop to conserve energy. - 4" (152 mm) heavy duty legs with adjustable feet. - One year parts and labor warranty. www.imperialrange.com B-4 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 58

Imperial IRB 24 Item #122 BROILERS RADIANT COUNTER TOP COUNTER TOP RADIANT BROILERS NUMBER OF GAS OUTPUT SHIP WEIGHT MODEL WIDTH BURNERS BTU (KW) (KG) LBS IRB-24 24" (610 mm) 4 60,000 (18) (118) 260 IRB-30 30" (762 mm) 5 75,000 (22) (141) 310 IRB-36 36" (914 mm) 6 90,000 (26) (159) 350 IRB-48 48" (1219 mm) 8 120,000 (35) (202) 445 IRB-60 60" (1524 mm) 10 150,000 (44) (261) 575 IRB-72 72" (1829 mm) 12 180,000 (53) (319) 705 Measurements in ( ) are metric equivalents. MANIFOLD PRESSURE MANIFOLD NATURAL GAS PROPANE GAS SIZE 5.0" W.C. 10.0" W.C. 3/4" (19 mm) Specify elevation, if over 2,000 ft. CLEARANCE REQUIREMENTS Legs or stand required for non-combustible surfaces. Provide 0" clearance from non-combustible surfaces and 8" (203 mm) from combustible surfaces. MODEL DIMENSIONS CRATED DIMENSIONS 24" w x 31-3/8" d x 13-3/4" h 26-1/2" w x 34" d x 16" h IRB-24 (610 x 797 x 286 mm) (673 x 864 x 406 mm) IRB-30 IRB-36 IRB-48 IRB-60 IRB-72 30" w x 31-3/8" d x 13-3/4" h (762 x 797 x 286 mm) 36" w x 31-3/8" d x 13-3/4" h (914 x 797 x 286 mm) 48" w x 31-3/8" d x 13-3/4" h (1219 x 797 x 286 mm) 60" w x 31-3/8" d x 13-3/4" h (1524 x 797 x 286 mm) 72" w x 31-3/8" d x 13-3/4" h (1829 x 797 x 286 mm) 32-1/2" w x 34" d x 16" h (826 x 864 x 406 mm) 38-1/2" w x 34" d x 16" h (978 x 864 x 406 mm) 50-1/2" w x 34" d x 16" h (1283 x 864 x 406 mm) 62-1/2" w x 34" d x 16" h (1588 x 864 x 406 mm) 74-1/2" w x 34" d x 16" h (1892 x 864 x 406 mm) OPTIONS AND ACCESSORIES - Stainless steel radiants, in lieu of cast iron - Stainless steel flashing - Stainless steel equipment stands - 6" (152 mm) casters for equipment stands - Gas shut off valve 3/4" (19 mm) - Quick disconnect and flexible gas hose 1128 Sherborn Street Corona, CA 92879 800.343.7790 Ph: 951.281.1830 Fx: 951.281.1879 www.imperialrange.com E-mail: imperialsales@imperialrange.com B-4 11/13 2013 Imperial Commercial Cooking Equipment Printed in the U.S.A. Imperial reserves the right to change specifications at any time without prior notice and without any obligation for past or future equipment purchases. Visit www.imperialrange.com for specification updates. Palm Beach Tennis Second Floor Profitable Food Facili es Page: 59

Imperial IR 6 C Item #123 36 " RESTAURANT RANGES Model Numbers IR-6 IR-6-C IR-6 -XB IR-2-G24 IR-2-G24-C IR-2-G24-XB IR-4-G12 IR-4-G12-C IR-4-G12-XB IR-G36 IR-G36-C IR-G36-XB IR-4-S18 IR-4-S18-C IR-4-S18-XB Two rings of flame for even cooking no matter the pan size. IR-6 shown with optional casters Top grates with anti-clogging pilot shield protect the pilot from grease and debris. Back grate hot air dam deflects heat onto the stock pot, not the backsplash. Large 5" (127 mm) stainless steel landing ledge for convenient plating. Durable cast aluminum with a vylox heat protection grip. OPEN BURNERS - PyroCentric 32,000 BTU (9 KW) anti-clogging burner with a 7,000 BTU/hr. (2 KW) low simmer feature. Cast iron PyroCentric burners are standard on all IR Series Ranges. - Burners are anti-clogging and lift-off and separate for easy cleaning. No gaskets or screws. - One standing pilot per burner for instant ignition. GRATES - Front grates measure 12" x 11" (305 x 279 mm). Back grates are 12" x 13" (305 x 330 mm). - Back grates are sized for positioning large stock pots directly over burner and feature a hot air dam. - Extra wide grates are 12" x 18" (305 x 457 mmm) front and back. - Pots slide easily from section to section and onto landing ledge. - Grates are cast iron for a long service life. GRIDDLE - Highly polished 3/4" (19 mm) steel plate. 21" (533 mm) plate depth. - Burners have 20,000 (6 KW) BTU/hr. output with a heat deflector every 12" (305) for even heating. - 3" (76 mm) wide grease trough and removable grease can for easy cleaning. STANDARD CHEF DEPTH OVEN - Linear burner provides even heating throughout the 35,000 BTU (10 KW) oven. 100% safety pilot. - Unique burner baffle distributes heat flow to provide even temperatures throughout the oven cavity. - Exclusive heat deflector reflects heat into the oven, not the floor. - Interior is 26-1/2" w x 26" d x 14" h (673 w x 660 d x 356 h mm). Accommodates 18" x 26" (457 x 660) sheet pans left-to-right and front-to-back. - Porcelainized sides, rear, deck and door lining for easy cleaning. Heavy duty door hinge. - Stamped inner door liner provides extra strength while optimizing heat retention. - One chrome oven rack included. CONVECTION OVEN - 30,000 BTU/hr. (9 KW) convection oven with 1/4 hp blower motor cooks products quickly and evenly with less shrinkage. - Convection oven interior dimensions 26-1/2" w x 22-1/2" d x 14" h (673 x 572 x 356 mm). - Three position switch for cooking or cool down. Fan shuts off automatically when door is open. - Porcelainized sides, rear, deck and door lining for easy cleaning. Heavy duty door hinge. - Three chrome oven racks included. www.imperialrange.com Palm Beach Tennis Second Floor Profitable Food Facili es Page: 60 R-2

Imperial IR 6 C Item #123 36 " RESTAURANT RANGES 36" RESTAURANT RANGES GAS OUTPUT OPEN GRIDDLE SHIP WEIGHT TOP MODEL BTU (KW) BURNERS WIDTH (KW) LBS IR-6 227,000 (67) 6 N/A (274) 605 IR-6-C 222,000 (65) 6 N/A (301) 665 IR-6-XB 192,000 (56) 6 N/A (246) 545 IR-4-G12 183,000 (54) 4 12 (305 mm) (283) 625 IR-4-G12-C 178,000 (52) 4 12 (305 mm) 310) 685 IR-4-G12-XB 148,000 (43) 4 12 (305 mm) (256) 565 IR-2-G24 139,000 (41) 2 24" (610 mm) (288) 635 IR-2-G24-C 134,000 (39) 2 24" (610 mm) (314) 695 IR-2-G24-XB 104,000 (30) 2 24" (610 mm) (260) 575 IR-G36 95,000 (28) N/A 36" (914 mm) (297) 655 IR-G36-C 90,000 (26) N/A 36" (914 mm) (319) 705 IR-G36-XB 60,000 (18) N/A 36" (914 mm) (269) 595 EXTRA WIDE IR-4-S18 163,000 (48) 4 N/A (272) 600 IR-4-S18-C 158,000 (46) 4 N/A (298) 660 IR-4-S18-XB 128,000 (38) 4 N/A (244) 540 Measurements in ( ) are metric equivalents. NOTES - C specifies (1) 26-1/2" (673 mm) Convection Oven - XB specifies (1) Cabinet Base - G specifies Griddle Top, griddle on left is standard EXTERIOR - Stainless steel front, sides, backguard, shelf, landing ledge and kick plate - Welded and polished stainless steel seams - Large 5" (127 mm) stainless steel landing ledge - Control knobs are durable cast aluminum with a vylox heat protection grip - Full width, removable crumb tray under open burners for easy cleaning - 6" (152 mm) heavy duty legs with adjustable feet - One year parts and labor warranty DIMENSIONS 36" w x 31-1/2" d x 56-1/2" h (914 x 800 x 1435 mm) MANIFOLD PRESSURE MANIFOLD NATURAL GAS PROPANE GAS SIZE 5.0" W.C. 10.0" W.C. 3/4" (19 mm) Specify elevation, if over 2,000 ft. CRATED DIMENSIONS 38-1/2" w x 39" d x 35" h (998 x 991 x 889 mm) CLEARANCE REQUIREMENTS For use only on non-combustible floors. Legs or casters are required for non-combustible floors; or 2" (51 mm) overhang is required when curb mounted. Provide 0" clearance from non-combustible surfaces and 8" (203 mm) from combustible surfaces. OPTIONS AND ACCESSORIES - Reinforcement channels for mounting cheesemelter/salamander - 6" and 11" (152 and 279 mm) stainless steel backguards - 10" (254 mm) stainless steel wok ring - Saute burner head, interchangeable - Wok burner head, interchangeable - 220V motor and transformer for convection oven - Extra oven racks - Thermostatic griddle control - Grooved griddle top - Chrome griddle top - Griddle safety valve - Gas shut off valve 3/4" (19 mm) - Quick disconnect and flexible gas hose - 6" (152 mm) casters 1128 Sherborn Street Corona, CA 92879 800.343.7790 Ph: 951.281.1830 Fx: 951.281.1879 www.imperialrange.com E-mail: imperialsales@imperialrange.com R-2 11/13 2013 Imperial Commercial Cooking Equipment Printed in the U.S.A. Imperial reserves the right to change specifications at any time without prior notice and without any obligation for past or future equipment purchases. Visit www.imperialrange.com for specification updates. Palm Beach Tennis Second Floor Profitable Food Facili es Page: 61

RATIONAL B119106.12.202 Item #124 Project: Quantity: Item No: FCSI Section: Approval: Date: Specification CombiMaster Plus 101 E (10 x 12 x 20 inch/10 x 13 x 18 inch) Sat May 13 14:05:11 CEST 2017 Capacity Ten (10) Half-size sheet pans (13"x18") or Ten (10) Steam table pans (12"x20"x2.5") GN1/1 Removable, swivelling hinging rack Vertical distance between rails 2 5/8" (68 mm) Standard Features Electrically heated table device for cooking of meat, poultry, fish, side dishes, vegetables, egg dishes, desserts, bakery products and for automatic rethermalization Combi-steamer according to DIN 18866, DIN 10535 for selective use of steam and hot air, separately, sequentially, or combined 2-Year parts and labor warranty 5-Year steam generator warranty No-charge 4-hour RATIONAL certified chef assistance program Probe for core temperature measurement ClimaPlus humidity measurement, 5 stage setting and regulation Combi-steamer mode F/( C): steam: 85 to 265/(30 to 130), hot air: 85 to 575/(30 to 300), combination: 85 to 575/(30 to 300) Individual programming of at least 100 cooking programs with up to 6 steps transferable via USB High-performance fresh steam generator, pressureless 5 programmable fan speeds Integral, maintenance-free grease extraction system with no additional grease filter Single water connection as shipped, can be split connection for treated and untreated water Turbo fan cool down function Dynamic air mixing Automatic adaptation to the installation location (elevation) Unit door with rear-ventilated double-glass panel and hinged inner panel Height adjustable feet +- 3/8" (10 mm) 304 (DIN 1.4301) stainless steel material inside and out Seamless interior and with rounded corners Temperature units can be set in F/( C) Digital temperature display Digital timer, 0-24 hours with permanent setting USB Interface Demand-related energy supply Operation Mode selector for cooking modes, separate controls for temperature, core temperature and time settings LED illuminated display, visible from a distance Clear control panel Safety features Detergent and rinse tabs (solid detergents) for optimum working safety VDE approved for unsupervised operation HACCP data output and software update via integral USB port Safety temperature limiter for steam generator and hot-air heating Maximum rack height 5 ¼ ft./1.60 m when original stand is used Integral fan impeller brake Door handle with right/left and slam function Splash an hose-proof to IPX5 Cleaning & care 3 automatic cleaning programs Service Diagnostic system (SDS) with automatic service notices displayed Menu-guided user descaling program Hand shower with automatic retracting system Approval/Labels Palm Beach Tennis Second Floor Profitable Food Facili es Page: 62

RATIONAL B119106.12.202 Item #124 Project: Quantity: Item No: FCSI Section: Approval: Date: Specification CombiMaster Plus 101 E (10 x 12 x 20 inch/10 x 13 x 18 inch) Sat May 13 14:05:11 CEST 2017 Combi-Steamer mode Steam between 85-265 F (30-130 C) Hot-air from 85-575 F (30-300 C) ClimaPlus Climate management - humidity measurement, 5-stage setting and regulation Combination of steam and hot-air 85-575 F (30-300 C) Technical Specification Dimensions Width Depth Height Exterior 33 3/8'' (847 mm) 30 1/2'' (776 mm) 41'' (1,042 mm) Incl. Vent/Handle - 33'' (838 mm) 43 1/8'' (1,096 mm) Shipping 37 3/8'' (950 mm) 36 1/4'' (920 mm) 50 3/8'' (1,280 mm) Weight Max Per Shelf Max Load Size Net Shipping 33 lbs 99 lbs 291 lbs 318 lbs Size Electric. 60 hz Breaker Cable connection Running Amps 101 208V 3 PH 60A #4 52.8 amps 101 240V 3 PH 75A #4 60.9 amps 101 480V 3 PH 35A #8 27 amps 101 440V 3 PH 30A #8 24.9 amps Not supplied with cable connection. Use copper wire only. 3Ph 4-wire system (3 wire w/ ground)-dedicated 3 pole circuit breaker required. 1 Ph L1, L2, G-dedicated 2 pole circuit breaker required. 208 v is field retrofittable to 240v, 480v is field retrofittable to 440v. Special voltages available upon request. Do not use fuses. Thermal load and airflow requirements Latent 980 W Sensible 1282 W Unit free standing 22495 ft²/h One side against a wall 14161 ft²/h Noise values 65 dba Connected load electric Hot air connection: 18 kw Steam connection: 18 kw Connected load electric: 19 kw Water Requirements Connection Supply Pressure Average Water Consumption Min/Max Flow Rate Water Drain 3/4'' Minimum 1/2 ID Drinking Quality Cold 21-87 psi (1.5-6 bar) 1.7 gal/h 3 gpm/5.27 gpm 2 OD (50 mm) hub Connect only to 2" (XS type 6 2/3 = 1 5/8") high-temperature resistant pipe. Water discharge temperature can be field adjusted to meet section 701.7 of the Inter-national Plumbing Code. Contact RATIONAL for back flow recommendation. Water Quality Sodium ion exchangers are not recommended; H+ Ion exchange systems are recommended. Water that does not meet the following minimum standards will require the proper conditioning. Contaminant Water Requirements If > than recommended Sand/Particles < 15 µm Particle filter Chlorine (Cl2) < 0.12 gr/gal (0.2 ppm) Active carbon filter Chloride (Cl-) < 4.68 gr/gal (80 ppm) RO or deionization Clearance Requirements To facilitate servicing, we recommend leaving a 18"-20" (450-500 mm) gap on the left-hand side of the unit. If there is not 18"-20" (450-500 mm) left side clearance available, provisions for moving the unit or appliance to the left for service access must be made. These include, but are not limited to, having quick connections (water, gas, etc.) and lengthened electrical connections with flexible cords. If there are no external heat sources acting on the unit, there should be a minimum gap of 2 (50 mm) to the left, right, and back of unit. If a high temperature heat source is on the left side of the unit, the left-hand gap must be a minimum of 14 (350 mm). This gap may be reduced to 2" (50 mm) by using a heat shield (see options). Recommended clearance from unobstructed rear exhaust pipes and any surface collecting grease or flammable material; 16" (400 mm) gas, 10" (254 mm) electric. It is recommended to have a hood overhang of 6 (150 mm) to 18 (450 mm) at the front of the unit and 6 (150 mm) on the side if installed at the end of the cooking line. Please refer to the Installation Manual for further technical data and for instructions on installation and setup. Installations must comply with all local electrical, plumbing, and ventilation codes. RATIONAL USA Inc. 1701 Golf Road, Suite C-120, Commercium Rolling Meadows, IL 60008 Toll Free: 888-320-7274, Fax.: 847-755-9583 Visit us on the internet: www.rationalusa.com : We reserve the right to make technical improvements Palm Beach Tennis Second Floor Profitable Food Facili es Page: 63

RATIONAL B119106.12.202 Item #124 Project: Quantity: Item No: FCSI Section: Approval: Date: Specification CombiMaster Plus 101 E (10 x 12 x 20 inch/10 x 13 x 18 inch) Sat May 13 14:05:11 CEST 2017 1. Common water supply (cold water) "Single" water connection as shipped 2. Water supply cold water / condensate "Split" water connection 3. Water supply cold / Treated "Split" water connection 4. Water drain 5. Electrical connection wire entrance 6. Chassis Ground connection 7. Steam Vent pipe DN 2 3/8" / 60 mm minimum distance 2" / 50 mmleft side clearance 20" recommended for servicing of unit without the ability to move unit while connected. Measurements in mm (inch) RATIONAL USA Inc. 1701 Golf Road, Suite C-120, Commercium Rolling Meadows, IL 60008 Toll Free: 888-320-7274, Fax.: 847-755-9583 Visit us on the internet: www.rationalusa.com : We reserve the right to make technical improvements Palm Beach Tennis Second Floor Profitable Food Facili es Page: 64

RATIONAL B119106.12.202 Item #124 Project: Quantity: Item No: FCSI Section: Approval: Date: Specification CombiMaster Plus 101 E (10 x 12 x 20 inch/10 x 13 x 18 inch) Sat May 13 14:05:11 CEST 2017 ELECTRICAL OPTIONS (all 60Hz) Special voltages available upon request Voltage / breaker / running amps / AWG 208V 3 Ph / 60 / 52.8 / #4-480V 3 Ph / 35 / 27.0 / #8 - field retrofittable to 240 V field retrofittable to 440 V Voltage / breaker / running amps / AWG 240V 3 Ph / 75 / 60.9 / #4 440V 3 Ph / 30 / 24.9 / #8 ACCESSORIES Installation Kits include electrical, water and drainage connection 208 or 240/60/3PH 480 or 440/60/3PH RATIONAL Cleaner Tabs without phosphorous guarantee maximum cleaning power RATIONAL Rinse Tabs Electric descaler pump Descaler, 4x 1 gallon case Certified installation by RATIONAL SERVICE-PARTNERS Preventative Maintenance Kits door gaskets, air filters, interior light gasket, and light bulbs Available stands standard (stationary) and mobile (open or closed) Mobile catering stand especially for heavy mobile catering usage Catering kit for mobile catering stand support frame and feet Mobile oven racks and Finishing plate racks easier operation of full loads Run-in rail for mobile oven and plate racks Transport trolley for mobile oven and plate racks standard and height adjustable Stackable Combi-Duo kit, for stacking with 61 gas or electric - options: mobile or feet Heat shield for installation next to heat source (e.g. range, grill) Condensation breaker to divert steam from the unit into existing hood system UltraVent ventless condensation hood UL approved (not available with left-hinged door) RATIONAL USB data-memory stick for transferring cooking programs and HACCP data VarioSmoker for a large variety of smoked products For ideal grilling, baking, roasting, frying, rotisserie, steaming, Finishing, and much more 8720.1551US 8720.1552US 56.00.210A 56.00.211 60.40.497 6006.0110US See document 87.00.522US See accessories brochure 60.30.890 60.73.111 See accessories brochure 60.61.226 See accessories brochure See accessories brochure 60.70.391 60.72.591 60.72.327 42.00.162 60.73.010 See accessories brochure FACTORY INSTALLED OPTIONS (special order) Left-hinged door 208V / 240V Left-hinged door 480V / 440V Ethernet card and port for easy connection of LAN cable Door safety lock handle is turned left then right before the door can be opened Sous-Vide core temperature probe (externally attached) Externally attached standard core temperature probe Lockable control panel cover Control panel protection Mobile oven rack package (mobile oven rack + run-in rail) Unit with special hinging racks for bakeries and supermarkets Integrated fat drain (only in conjunction with UG II or US IV stands) Marine version (electric units only) Security and prison version RATIONAL USA Inc. 1701 Golf Road, Suite C-120, Commercium Rolling Meadows, IL 60008 Visit us on the internet: www.rationalusa.com : We reserve the right to make technical improvements Toll Free: 888-320-7274, Fax.: 847-755-9583 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 65

RATIONAL 8720.1551US Item #124 Installation Kit Article no. 8720.1551US The RATIONAL Installation Kit ensures that the installer has all the essential connection materials on hand at the time of install. Not all parts are used in every installation. Electric SelfCookingCenter 5 Senses/CombiMaster Plus 102 (440/60/3ph & 480/60/3ph) Electric SelfCookingCenter 5 Senses/CombiMaster Plus 201 (440/60/3ph & 480/60/3ph) Electric SelfCookingCenter 5 Senses/CombiMaster Plus 61 (208/60/1ph & 240/60/1ph) Electric SelfCookingCenter 5 Senses/CombiMaster Plus 101 (208/60/3ph & 240/60/3ph) The Installation Kit for the above models includes: 40 feet THHN 4 AWG black stranded wire 12 feet THHN 6 AWG Green stranded wire 10 feet 1" SEALTITE flexible conduit 2 ea 1 1/4" ridgid, 1 1/2" EMT minnies 2 ea 2" minnies 1 ea 1" SEALTITE conn straight w/o ins 1 ea 1" SEALTITE 90 degree conn w/o ins 2 ea 3/4" Water Connector Hose, 5/8" ID, 3/4" female hose thread both ends, 60" long rubber coated, NSF approved 1 ea Male union 3/4" 3/4" MHT 2 ea 90 deg Fresh water elbow 8 feet 2" copper pipe (two 4' pieces) 2 ea 2" copper pipe 90 degree elbow 1 ea 2" copper pipe T fitting 2 ea 2" copper pipe 45 degree elbow 1 ea 2" copper pipe 90 degree elbow female to male 1 ea 2" copper pipe 90 degree long sweep 1 ea 2" copper pipe coupling Please note that installation kits are non-discountable. Palm Beach Tennis Second Floor Profitable Food Facili es Page: 66

RATIONAL 1900.1154US Item #124 Water Filtration Products. R195-CL R195-CL RATIONAL Water Filtration Products Model R195-CL single cartridge water filtration system helps provide consistent high quality water for your RATIONAL combi by reducing the effects of sediment, chloramines, chlorine, taste & odor while providing the required flow rates for any single Combi model or Combi-Duo models 61/61 or 61/101 or XS/XS. Product Benefits > Carbon block technology effectively reduces chloramines, chlorine, taste, and odor for better equipment protection. > NSF Standard 42 and FDA CFR-21 compliant materials. > Sanitary Quick Change (SQC) encapsulated cartridge design allows for fast and easy cartridge change-outs with ¼ turn. > ½ FNPT horizontal inlet and outlet ports allow direct or easily adaptable connections to existing plumbing lines. Model Number Article No. Reduction Claims Nominal Micron Rating Capacity Service Flow Rate Replacement Cartridge R195-CL 1900.1154US Sediment, Chloramines 1, Chlorine, Taste and Odor 5.0 2 30,000 gallons (113,550 liters) 2.5 gpm (9.5 lpm) R95-CL 1900.1155US 1 As tested and certified by independent third party laboratory 2 NSF Certified for Particulate Reduction Visit www.nsf.org for the claims associated with products that are NSF listed. Palm Beach Tennis Second Floor Profitable Food Facili es Page: 67

RATIONAL 1900.1154US Item #124 Water Filtration Products. R195-CL 4 3/8" 21 7/8" Application Guide > All single SCC or CMP units. > XS/XS Combi-Duo > 61/61 Combi-Duo > 61/101 Combi-Duo Important: Installation Tips These installation tips are for informational purposes only and are not intended to be used as actual installation instructions. Caution: To reduce the risk associated with property damage due to water leakage: > Read and follow Use Instructions before installation and use of this system. > Installation and use must comply with all state and local plumbing codes. > Protect from freezing, remove filter cartridge when temperatures are expected to drop below 40 F (4.4 C). > Do not install on hot water supply lines. The maximum operating water temperature of this filter system is 100 F (37.8 C). > Do not install if water pressure exceeds 125 psi (862 kpa). If your water pressure exceeds 80 psi (552 kpa), you must install a pressure limiting valve. Contact a plumbing professional if you are uncertain how to check your water pressure. > Do not install where water hammer conditions may occur. If water hammer conditions exist you must install a water hammer arrester. Contact a plumbing professional if you are uncertain how to check for this condition. > The disposable filter cartridge must be replaced every 12 months, at the rated capacity or sooner if a noticeable reduction in flow rate occurs. 2 5/16" Min required for CTG removal Warning To reduce the risk associated with the ingestion of contaminants: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. RATIONAL recommends regularly scheduled maintenance and replacement of the filter cartridge(s) in order for the product to perform as advertised/sold. RATIONAL shall not be liable for system failures due to improper maintenance. RATIONAL USA 1701 Golf Road Suite C-120, Commercium Rolling Meadows, IL 60008 Tel. 888-320-7274 (Toll Free) Fax 847-755-9583 info@rational-online.us rationalusa.com Limited Warranty RATIONAL warrants this Product will be free from defects in material and manufacture for five (5) years from the date of purchase: The filter cartridge or filter membrane is warranted to be free from defects in material and manufacture for one (1) year. This warranty does not cover failures resulting from abuse, misuse, alteration or damage not caused by RATIONAL Water Filters or failure to follow installation and use instructions. No warranty is given as to the service life of any filter cartridge or membrane as it will vary with local water conditions and water consumption. RATIONAL MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOMER OR USAGE OF TRADE. If the Product fails to satisfy this Limited Warranty during the warranty period, RATIONAL will replace the Product or refund your Product purchase price. This warranty does not cover labor. The remedy stated in this paragraph is Customer s sole remedy and RATIONAL exclusive obligation. For additional information, see the entire Limited Warranty located in the product Installation and Operating Instruction Manual. Limitation of Liability. RATIONAL will not be liable for any loss or damage arising from this RATIONAL product, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. Some states and countries do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. xx.xxx V-01 MDS/Leno 10/17 englisch USA Palm Beach Tennis Second Floor Profitable Food Facili es Page: 68

RATIONAL B619206.19E202 Item #124 Project: Quantity: Item No: FCSI Section: Approval: Date: Specification CombiMaster Plus XS 61 G (6 x 12 x 20 inch/6 x 13 x 18 inch) Sat May 13 14:08:37 CEST 2017 Capacity Six (6) Half-size sheet pans (13"x18") or Six (6) Steam table pans (12"x20"x2.5") GN1/1 Removable, swivelling hinging rack Vertical distance between rails 2 5/8" (68 mm) Standard Features Gas heated table device for cooking of meat, poultry, fish, side dishes, vegetables, egg dishes, desserts, bakery products and for automatic rethermalization Combi-steamer according to DIN 18866, DIN 10535 for selective use of steam and hot air, separately, sequentially, or combined 2-Year parts and labor warranty 5-Year steam generator warranty No-charge 4-hour RATIONAL certified chef assistance program Probe for core temperature measurement ClimaPlus humidity measurement, 5 stage setting and regulation Combi-steamer mode F/( C): steam: 85 to 265/(30 to 130), hot air: 85 to 575/(30 to 300), combination: 85 to 575/(30 to 300) Individual programming of at least 100 cooking programs with up to 6 steps transferable via USB High-performance fresh steam generator, pressureless 5 programmable fan speeds Integral, maintenance-free grease extraction system with no additional grease filter Single water connection as shipped, can be split connection for treated and untreated water Turbo fan cool down function Dynamic air mixing Automatic adaptation to the installation location (elevation) Unit door with rear-ventilated double-glass panel and hinged inner panel Height adjustable feet +- 3/8" (10 mm) 304 (DIN 1.4301) stainless steel material inside and out Seamless interior and with rounded corners Temperature units can be set in F/( C) Digital temperature display Digital timer, 0-24 hours with permanent setting USB Interface Demand-related energy supply Operation Mode selector for cooking modes, separate controls for temperature, core temperature and time settings LED illuminated display, visible from a distance Clear control panel Safety features Detergent and rinse tabs (solid detergents) for optimum working safety VDE approved for unsupervised operation HACCP data output and software update via integral USB port Safety temperature limiter for steam generator and hot-air heating Maximum rack height 5 ¼ ft./1.60 m when original stand is used Integral fan impeller brake Door handle with right/left and slam function Splash an hose-proof to IPX5 Cleaning & care 3 automatic cleaning programs Service Diagnostic system (SDS) with automatic service notices displayed Menu-guided user descaling program Hand shower with automatic retracting system Approval/Labels Palm Beach Tennis Second Floor Profitable Food Facili es Page: 69

RATIONAL B619206.19E202 Item #124 Project: Quantity: Item No: FCSI Section: Approval: Date: Specification CombiMaster Plus XS 61 G (6 x 12 x 20 inch/6 x 13 x 18 inch) Sat May 13 14:08:37 CEST 2017 Combi-Steamer mode Steam between 85-265 F (30-130 C) Hot-air from 85-575 F (30-300 C) ClimaPlus Climate management - humidity measurement, 5-stage setting and regulation Combination of steam and hot-air 85-575 F (30-300 C) Technical Specification Dimensions Width Depth Height Exterior 33 3/8'' (847 mm) 30 1/2'' (776 mm) 30 3/4'' (782 mm) Incl. Vent/Handle - 33'' (838 mm) 32 3/4'' (832 mm) Shipping 37 3/8'' (950 mm) 36 1/4'' (920 mm) 39 3/8'' (1,000 mm) Weight Max Per Shelf Max Load Size Net Shipping 33 lbs 66 lbs 266 lbs 299 lbs Size Electric. 60 hz Breaker Cable connection Running Amps 61 120V 1 PH 15 A 5-15P 3.33 amps 61 208V 1 PH 15 A 6-15P 1.92 amps 61 240V 1 PH 15 A 6-15P 1.67 amps Gas units are supplied with 8 ft. 14-3 AWG cord and plug. 120V 1Ph L1, N, G or 208/240V 1 Ph L1, L2, G (208V is field retrofittable to 240V). Dedicated 2 pole circuit breaker required. Due to GFCI having a 4-6mA tolerance, 208/240V is recommended. Do not use fuses. Special voltages available upon request. Thermal load and airflow requirements Latent 595 W Sensible 714 W Unit free standing 13314 ft²/h One side against a wall 8405 ft²/h Noise values 70 dba Rated thermal load Natural gas Liquid gas LPG Total: 49,000 BTU 48,200 BTU Steam: 45,500 BTU 44,500 BTU Hot air: 49,000 BTU 48,200 BTU Connected load electric: 0.4 kw Water Requirements Connection Supply Pressure Average Water Consumption Min/Max Flow Rate Water Drain 3/4'' Minimum 1/2 ID Drinking Quality Cold 21-87 psi (1.5-6 bar) 0.8 gal/h 3 gpm/5.27 gpm 2 OD (50 mm) hub Connect only to 2" (XS type 6 2/3 = 1 5/8") high-temperature resistant pipe. Water discharge temperature can be field adjusted to meet section 701.7 of the Inter-national Plumbing Code. Contact RATIONAL for back flow recommendation. Water Quality Sodium ion exchangers are not recommended; H+ Ion exchange systems are recommended. Water that does not meet the following minimum standards will require the proper conditioning. Contaminant Water Requirements If > than recommended Sand/Particles < 15 µm Particle filter Chlorine (Cl2) < 0.12 gr/gal (0.2 ppm) Active carbon filter Chloride (Cl-) < 4.68 gr/gal (80 ppm) RO or deionization Clearance Requirements To facilitate servicing, we recommend leaving a 18"-20" (450-500 mm) gap on the left-hand side of the unit. If there is not 18"-20" (450-500 mm) left side clearance available, provisions for moving the unit or appliance to the left for service access must be made. These include, but are not limited to, having quick connections (water, gas, etc.) and lengthened electrical connections with flexible cords. If there are no external heat sources acting on the unit, there should be a minimum gap of 2 (50 mm) to the left, right, and back of unit. If a high temperature heat source is on the left side of the unit, the left-hand gap must be a minimum of 14 (350 mm). This gap may be reduced to 2" (50 mm) by using a heat shield (see options). Recommended clearance from unobstructed rear exhaust pipes and any surface collecting grease or flammable material; 16" (400 mm) gas, 10" (254 mm) electric. It is recommended to have a hood overhang of 6 (150 mm) to 18 (450 mm) at the front of the unit and 6 (150 mm) on the side if installed at the end of the cooking line. Please refer to the Installation Manual for further technical data and for instructions on installation and setup. Installations must comply with all local electrical, plumbing, and ventilation codes. RATIONAL USA Inc. 1701 Golf Road, Suite C-120, Commercium Rolling Meadows, IL 60008 Toll Free: 888-320-7274, Fax.: 847-755-9583 Visit us on the internet: www.rationalusa.com : We reserve the right to make technical improvements Palm Beach Tennis Second Floor Profitable Food Facili es Page: 70

RATIONAL B619206.19E202 Item #124 Project: Quantity: Item No: FCSI Section: Approval: Date: Specification CombiMaster Plus XS 61 G (6 x 12 x 20 inch/6 x 13 x 18 inch) Sat May 13 14:08:37 CEST 2017 1. Common water supply (cold water) "Single" water connection as shipped 2. Water supply cold water / condensate "Split" water connection 3. Water supply cold / Treated "Split" water connection 4. Water drain 5. Electrical connection wire entrance 6. Chassis Ground connection 7. Steam Vent pipe DN 2 3/8" / 60 mm 8. Gas connection ¾ NPT' 9. Steam burner exhaust pipe 10. Hot-air burner exhaust pipe minimum distance 2" / 50 mm Left side clearance 20" recommended for servicing of unit without the ability to move unit while connected. Measurements in mm (inch) RATIONAL USA Inc. 1701 Golf Road, Suite C-120, Commercium Rolling Meadows, IL 60008 Toll Free: 888-320-7274, Fax.: 847-755-9583 Visit us on the internet: www.rationalusa.com : We reserve the right to make technical improvements Palm Beach Tennis Second Floor Profitable Food Facili es Page: 71

RATIONAL B619206.19E202 Item #124 Project: Quantity: Item No: FCSI Section: Approval: Date: Specification CombiMaster Plus XS 61 G (6 x 12 x 20 inch/6 x 13 x 18 inch) Sat May 13 14:08:37 CEST 2017 GAS OPTIONS Natural Gas Liquid Gas (LP) ELECTRICAL CONNECTION ON GAS UNITS (all 60Hz) Special voltages available upon request Voltage / breaker / running amps / 120V 1 Ph / 15 / 3.33 / comes with 5-15P cord and plug 208V 1 Ph / 15 / 1.92 / comes with 6-15P cord and plug -field retrofittable to 240 V / 15 / 1.67 ACCESSORIES Installation Kits include quick disconnect gas, water and drainage connection Gas 208/60/1 PH RATIONAL Cleaner Tabs without phosphorous guarantee maximum cleaning power RATIONAL Rinse Tabs Electric descaler pump Descaler, 4x 1 gallon case Certified installation by RATIONAL SERVICE-PARTNERS Preventative Maintenance Kits door gaskets, air filters, interior light gasket, and light bulbs Available stands standard (stationary) and mobile (open or closed) Mobile catering stand especially for heavy mobile catering usage Catering kit for mobile catering stand support frame and feet Mobile oven racks and Finishing plate racks easier operation of full loads Run-in rail for mobile oven and plate racks Transport trolley for mobile oven and plate racks standard and height adjustable Stackable Combi-Duo kit, options: mobile or feet Heat shield for installation next to heat source (e.g. range, grill) Condensation breaker to divert steam from the unit into existing hood system RATIONAL USB data-memory stick for transferring cooking programs and HACCP data VarioSmoker for a large variety of smoked products For ideal grilling, baking, roasting, frying, rotisserie, steaming, Finishing, and much more 8720.1560US 56.00.210A 56.00.211 60.40.497 6006.0110US See document 87.00.520US See accessories brochure 60.30.890 60.73.111 See accessories brochure 60.61.226 See accessories brochure See accessories brochure 60.70.390 60.72.591 42.00.162 60.73.010 See accessories brochure FACTORY INSTALLED OPTIONS (special order) Left-hinged door natural gas Left-hinged door liquid gas (LP) Ethernet card and port for easy connection of LAN cable Door safety lock handle is turned left then right before the door can be opened Sous-Vide core temperature probe (externally attached) Externally attached standard core temperature probe Lockable control panel cover Control panel protection Mobile oven rack package (mobile oven rack + run-in rail) Unit with special hinging racks for bakeries and supermarkets Integrated fat drain (only in conjunction with UG II or US IV stands) Security and prison version RATIONAL USA Inc. 1701 Golf Road, Suite C-120, Commercium Rolling Meadows, IL 60008 Visit us on the internet: www.rationalusa.com : We reserve the right to make technical improvements Toll Free: 888-320-7274, Fax.: 847-755-9583 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 72

Advance Tabco DI 1 10 Item #125 STAINLESS STEEL DROP-IN SINKS One Compartment - FOR HAND SINK USE Sinks Includes Gooseneck Faucet & Drain Item #: Qty #: Model #: Project #: FEATURES: One piece seamless Deep Drawn sink bowl design. All sink bowls have a large liberal radii with a minimum dimension of 2 and are rectangular in design for increased capacity. Self-Rim Design. Mounting clips provided accomodate all thicknesses of counter. (Quantity supplied varies based on drop in sink ordered). Includes 4" O.C. K-52 faucet & basket drain. CONSTRUCTION: Unit fabricated from one sheet of stainless steel. All bowls are Sound Deadened. Units feature Advance Tabco s Smart Finish. MECHANICAL: Faucet supply is 1/2 IPS male thread. Deck mounted faucet is furnished with aerator and 4 O.C. MATERIAL: 20 gauge type 304 series stainless steel. Faucets are brass-nickel plated. Stainless Steel 1-1/2" IPS basket drain. DI-1-5 DI-1-25 DI-1-5SP DI-1-10 STANDARD MOUNTING CLIPS For countertops over 7/8 and up to 2 thick. Replacement # K-28 (Per Sink) New 6 Rear & Side Splash Available Faucets & Accessories Deck Mounted 3 1/2" Gooseneck. 4" O.C. Deck Mounted 8 1/2" Gooseneck. 4" O.C. Deck Mounted Swing w/spray. 8" O.C.* Deck Mtd. X.H.D. 3 1/2" Gooseneck. 4" O.C. Mounting Clips (Bag of 4). Model # K-52 K-55 K-58 K-62 K-28 Qty DI-1-10SP DI-1-35 Standard Faucet conforms to NSF 61 Standard 9. Faucets Are AB1953 Lead Free Compliant. *REQUIRES K-472 FAUCET HOLE REVISION For Replacement Faucets & Upgrades, Drains & Accessories visit our website at www.advancetabco.com www.advancetabco.com Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T. Email Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933 NEW YORK GEORGIA TEXAS NEVADA Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 73 A-1

Advance Tabco DI 1 10 Item #125 DIMENSIONS and SPECIFICATIONS TOL ±.125 Supplied with K-52 Faucet ALL DIMENSIONS ARE TYPICAL DI-1-5 DI-1-25 Cut-Out Size 11 1/4 x 13 1/4 1 1/4 radius corners Approx. Wt. 12 lbs. DI-1-5SP 10" Approx. Wt. 8 lbs. Approx. Wt. 16 lbs. DI-1-35 DI-1-10 Cut-Out Size 16 1/4 x 14 1/4 1 1/4 radius corners Approx. Wt. 14 lbs. DI-1-10SP 10" Approx. Wt. 10 lbs. Approx. Wt. 18 lbs. TOP VIEW FOR DI-1-5 & DI-1-10 TOP VIEW FOR DI-1-5SP & DI-1-10SP TYPICAL INSTALLATION OVERALL DIMENSION (O.D) Cut-Out Size 12 1/4 x 18 1/4 1 1/4 radius corners 10" 19" 14" CUTOUT DIMENSION (O.D -3/4") Cut-Out Size = L to R x F to B 13" Standard Mounting Clips Fit Countertops Over 7/8 & Up To 2 Thick. ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. A-1a 200 Heartland Boulevard, Edgewood, NY 11717-8380 ADVANCE TABCO, SEPTEMBER 2013 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 74

Airdyne Refrigerat ion Inc. COMBO WALK IN Item #126 Description: 11'8" X 9' X 8.5' EXTERIOR Notes: Palm Beach Tennis Second Floor Prof itable Food Facilit ies Page: 75

Airdyne Refrigerat ion Inc. COOLER PORTION Item #127 Description: 6'5" X 8'4" INTERIOR Notes: Palm Beach Tennis Second Floor Prof itable Food Facilit ies Page: 76

Advance Tabco PR20 3K Item #128 ALUMINUM PAN RACKS Knock Down Item #: Qty #: Model #: Project #: Front Load FEATURES: Six cylindrical support bars provide strength and durability. 3 shelf spacing. Plastic endcaps, 1 1/2 ribbed angles, heavy duty 5 stem bolted swivel casters. Front load pan rack holds [20] 18 x 26 pans or [40] 18 x 13 pans. Side load pan rack holds [20] 18 x 26 pans. 500 lb. capacity. Units shipped K.D. CONSTRUCTION: Fully welded 1 square tubing ladder assembly. Angles are 1 x 1 1/2 x 20 on front load pan rack and 1 x 1 1/2 x 17 3/4 on side load pan rack. Side Load MATERIAL: 6063-T52 extruded aluminum angles, upright tubing, and support pieces. MODEL # Description Pan Capacity A Shelf Spacing Overall Size L x W x H Weight PR10-3K Front Load 10 Full Size 3 20 1/4 x 26 x 38 1/4 14 lbs. PR12-5K Front Load 12 Full Size 5 20 1/4 x 26 x 69 1/4 24 lbs. PR18-3K Front Load 18 Full Size 3 20 1/4 x 26 x 63 1/4 31 lbs. PR20-3K Front Load 20 Full or 40 Half Size 3 20 1/4 x 26 x 69 1/4 33 lbs. PR30-2K Front Load 30 Full Size 2 20 1/4 x 26 x 69 1/4 39 lbs. PR18-3KS Side Load 18 Full Size 3 28 1/4 x 18 x 63 1/4 31 lbs. PR20-3KS Side Load 20 Full Size 3 28 1/4 x 18 x 69 1/4 27 lbs. www.advancetabco.com Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T. For Orders & Customer Service: Email: customer@advancetabco.com or Fax: 631-242-6900 For Smart Fabrication Quotes: Email: smartfab@advancetabco.com or Fax: 631-586-2933 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 77 REF-R

TOL ±.500 Advance Tabco PR20 3K Item #128 DIMENSIONS and SPECIFICATIONS ALL DIMENSIONS ARE TYPICAL Front Load A Aluminum Upright 20 1/4" 1 1/2" Ribbed Angle 26" H 18 1/8" Cylindrical Cross Brace 5" Dia. Swivel Casters Side Load REF-R 200 Heartland Boulevard, Edgewood, NY 11717-8380 ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, MAY 2016 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 78

Airdyne Refrigerat ion Inc. FREEZER PORTION Item #130 Description: 4'3" X 8'4" INTERIOR Notes: Palm Beach Tennis Second Floor Prof itable Food Facilit ies Page: 79

Cambro CD2020110 Item #133 Item No. Camdollies For Dish Racks Without Handle Model CD2020, CDR2020 With Handle Models CD2020H, CD2020HB, CDR2020H Features & Benefits Make any job easier by smoothly transporting stacks of full size 20" x 20" (50 cm x 50 cm) dish racks with these rugged and reliable Camdollies. The CDR2020 and CDR2020H models will transport side by side stacks of half size dish racks also. Load capacity: Model CD2020-300 lbs. (136 Kg.) Model CDR2020-350 lbs. (159 Kg.) Models CD2020H, CDR2020H, CD2020HB - 350 lbs. (159 Kg.) Material design: Models CD2020, CD2020H, CD2020HB - One piece seamless, double-wall, high-density polyethylene construction is extremely durable. Won't rust or corrode. Foamed-in-place polyurethane core adds greater structural strength and reduces noise. Molded in handle on Model CD2020H and CD2020HB is extra sturdy and will not break or bend. Provides controlled handling and maneuvering over the roughest terrain. Models CDR2020 and CDR2020H - Injection molded high-density polypropylene offers exceptional performance with improved affordability. Will handle the demands of any foodservice operation. Won't rust or corrode. Weighs 40% less than the CD2020 for improved ease of handling and carrying when empty. A powder coated handle on the CDR2020H offers easy maneuvering. Simple to clean - all can be wiped down or steam cleaned. Casters: Models CD2020, CD2020H - Four each 3" (7,6 cm) heavy-duty, swivel casters, no brake. Bolted into molded-in steel plates. Model CD2020HB - Two each rear 10" (25,4 cm) Easy Wheels and 2 each 5" (12,7 cm) swivel casters, 1 w/ brake. Bolted into molded-in steel plates. Models CDR2020, CDR2020H - Four each 4" (10 cm) swivel casters, no brake. No assembly required for models CD2020, CD2020H and CD2020HB. Minimal assembly required for CDR2020 and CDR2020H. Colors: Models CD2020, CD2020H and CD2020HB available in 5 colors. Models CDR2020 andcdr2020h available in Soft Gray (151) only. Specifier Identification No. Model No. Quantity CD2020H For Camracks CD2020 CD2020HB CDR2020 10" (25,4 cm) Easy Wheels CDR2020H Approvals CD2020, CD2020H, CD2020HB only. 2008 Cambro Manufacturing Company 5801 Skylab Road, Huntington Beach, California 92647-2056-U.S.A. T e l e p h o n e (1)714 848 1555 Toll Free 800 854 7631 Customer Service 800 833 3003 LIT FCST-0102-06 Palm Beach Tennis Second Floor Profitable Food Facili es Page: 80 6