LABEXIA LX Glassware Washer-Dryer
Construction and Design The LX Washer-Dryer stands upright and has professional features and stainless steel construction for durability. Complete cleaning is obtained with water circulated in the chamber via spray arms as well as through injectors directly inside of glassware. Chamber and door: AISI - 6 L stainless steel Exterior panels: AISI - 0 L stainless steel Double wall insulation: provides thermal and sound protection Telescopic rails are load bearing for easy loading and unloading Detergent delivery system: liquid detergent automatically injected into wash chamber via peristaltic pump according to programmable parameters. Acid Neutralizer delivery system: liquid acid neutralizer automatically injected into wash chamber via peristaltic pump according to programmable parameters. Low level chemical alarms (visual and audible alerts) indicate when chemical levels are low. Three independent wash levels: Provide automatic connection of loading accessories (basic basket, injector racks) Racks interchangeable among levels Glassware determines rack placement and position Microprocessor Control Easy selection of standard washing programs for numerous applications including: Chemistry glassware Bacteriology/virology (high temperature) Stubborn stains (agar) Volumetric glassware (low-temp) Many others Easily adjustable parameters (password-protected access) including: program phases, temperature and time of each phase and cleaning chemical dosing. Self-diagnostic program, with visual and audible alarms, alerts the user in the event of a malfunction enabling quick troubleshooting and maintenance. Mechanical Washing System Washing system provides uniform wash/rinse solution on all levels. Superior hydraulic design: Multi Function Rack Racks connect to hydraulic circuit via automatic, low profile valves Rear rack connections allow for maximum use of chamber volume Door holds racks in place ensuring positive rack connection and efficient flow of wash/rinse solution PST Basket Top and bottom spray arms ensure complete washing and rinsing of glassware exterior, interior of large mouthed glassware and wash chamber. Programmable water rinses for hot, cold and hot/ cold DI water. Injector Rack with Li Cleaning Chemicals Available exclusively from Lancer, our premixed detergents and acid neutralizers are specifically made for use in all high pressure washers. LANCERCLEAN Detergent: Formulas (Potassium Hydroxide Based, Sodium Hydroxide Based, ph Neutral) LANCERACID Rinse: Formulas (Acetic Acid Based, Citric Acid Based, Phosphoric Acid Based)
Overall Dimensions 6.08 H x.78 W x 8.97 D (in) 68 H x 60 W x 76 D (mm) Total Electric Power Technical Data and Utilities 0 kw Chamber Dimensions. H x W x 0 D (in) 6 H x W x 0 D (mm) Drainage Drain pipe diameter. inches, to inches from floor Wash Levels to with upper level height adjustable ( positions) Voltage 08 V- Ph, 0 V- Ph, 80 V- Ph 08 V- Ph, 0 V- Ph Water Consumption.96 gal ( L) per fill Net Weight 0 lbs Recirculation Pump (flow rate) gal/min (0 L/min) Heat Loss,0 Btu/hr (860 Kcal/hr) Heating 9 kw Noise Level <6 dba Drying.8 kw Water Supply (Cold, Hot, DI) Connection Flow Pressure ¾ inch hose thread 0 L/min ( ¼ gal/min) 9-87 psig Multiple Loading Configurations Configuration Configuration Configuration Configuration Configuration Three Independent Wash Levels with four loading positions allow for flexibility of multiple types of glassware in a single load to fit your specific application. Adjustable height on upper level ( positions) accommodates for taller glassware on the middle level. HEPA Filtered Injector Drying System: Complete and rapid drying of glassware with HEPA filtered forced air inside the washer chamber and directed into the glassware via rack injectors. On board chemical storage is provided via front loading chemical drawer. Features and Options Other available options include: Drain discharge cool down, low pressure valve, emergency stop button, external printer, steam condenser, steam heating, gravity drop drain, ph neutralization and IQ/OQ protocol. Contact Lancer for further details on these and other accessories and options. Accessories Wide range of accessories: If your lab needs higher throughput, the Labexia LX will easily adapt to your needs, as a myriad of accessories will enable you to wash on independent levels pipettes, volumetric flasks, etc. Lancer has the optimal accessory for your application. (See rack catalog for further accessory options.) d Chamber View Top Available height by rack position Multi Function Rack Jet Rack 9.7 (9 mm). (60mm) 6 7 8 0 9 PST PSBT IXL IXC PST PSBT IXL IXC 6 8. 0 0 7 7.7 9.9 0 9 0 0.6 70 Inches and mm shown 6 6. 66 7 8 9 0 0. 0..9 7. 60. 60 8. 60. 70.8 60.9 6 PST: Basic Basket, PSBT: Basic Basket with spray arm, IXL: Injection Rack (long jets), IXC: Injection Rack (short jets)
LANCER USA Inc. State Rd. 9 Winter Springs, FL 708 Toll Free: (800)-8 Phone: (07)7-888 Fax: (07)7-9 sales@lancer.com www.lancer.com JJDE 07070 00 Lancer Sales USA Inc. Lancer is a registered trademark. Lancer is constantly reviewing its products for improvements. Consequently, the actual products may slightly differ from the products pictured and described here. Printed in the USA.
LANCER LX Laboratory Glassware Washer Description: The LX fully automatic freestanding washer has an electronic programmable microprocessor capable of storing up to programs ( pre-programmed, 0 user definable functions, password protected) for pre-wash, wash, acid rinse, final rinse HEPA Filtered drying and cooling. These units are capable of injection cleaning on to levels with possible rack locations, providing maximum capacity through multiple chamber configurations. Each level has telescopic, load bearing runners to house the racks, eliminating the need to handle loaded racks. Chamber drying and direct injector drying is standard. Drop down door provides loading platform. Washer has on-board chemical storage with liquid level sensors. Contact LANCER: LANCER Sales USA Inc State Rd 9 - Winter Springs, FL 708 Toll Free: (800)-8 Phone: (07)7-888 Fax: (07)7-9 sales@lancer.com - www.lancer.com Specifications: Dimensions: External: 6.08 H x.78 W x 8.97 D Internal:. H x W x 0 D Wash chamber load area: Wash Levels - 60 square inches per level,,080 square inches total levels Loading Height:.8 (860 mm) Water Consumption:.96 gallons per fill ( L per fill) Heat Loss:,0 Btu / 860 Kcal/h Sound Level: <6 dba Cycles: pre-programmed, 8 user-defined Injection Cleaning: to levels with possible rack positions Dosing: Automatic detergent and acid dosing via peristaltic pump Chemical Storage: Front access drawer Drying: HEPA filtered chamber and injector drying Standards: Manufactured under ISO 900 accreditation. Standard Features: Drop Down Door Counterbalanced for ease of operation Ensures proper rack placement and connection to manifold Manufactured of solid 6L stainless steel Fully insulated to reduce heat loss and noise Provides loading platform eliminating need for loading cart Fully Extendable, Load Bearing Arms Support jet racks for loading and unloading of glassware Eliminate need for loading cart Spray System Includes one rotary spray arm in top of chamber / one rotary spray arm in bottom of chamber Spray arms made of # sanitary high-grade 0L stainless steel Easily disassembled for cleaning and maintenance System Wash Levels to levels Rack actuated via automatic manifold connections when door is closed Rack accessories independent and easily removable for use on all levels Super Drying System HEPA filtered chamber and direct injection drying.8 kw heating elements and blower provide drying up to 0 C Main Recirculation Pump / HP with capacity of gal/min (0 l/min) Filter System Two stainless steel filters protect recirculation and drain pumps from debris Filters easily removed for cleaning Filters on all incoming water lines Peristaltic Detergent and Acid Pumps Provides precise addition of chemical agents Wash Solution Heating System 9 kw electric heating elements provides heating up to 9 C Electronic Thermostat Independent selection of temperature for pre-wash, wash and final rinse between ambient and 9 C Microprocessor Control System User programmable with storable programs and 0 user definable functions Version - / Systems Control Panel -½ inch LCD display window with -line x 6 characters and program naming capability Touch pad is waterproof and glove friendly System Monitoring Audible and visual alarms provide quality control for each wash cycle Water Level Sensors Two independent sensors control chamber water level and prevent overflow Liquid Level Sensors Determine when cleaning chemical levels are low Programming and Cycle Operation: Pre-Wash - Select number of Pre-Washes (0 to ), length of Pre-Wash (up to 0 minutes), temperature of water (up to 9 C) and detergent. User can select hot, cold or purified water. Wash - Select length of Wash (up to 0 minutes), detergent dosing time and temperature of water (up to 9 C). User can select hot, cold or purified water. Running Water Rinse - Select number of rinses (0 to 9). Unit fills with cold water rinses for 0 seconds and drains. User can select hot, cold or purified water. Acid Rinse - Select length of Acid Rinse (up to 0 minutes), amount of acid. User can select hot, cold or purified water. Running Water Rinse - Select number of rinses (0 to 9). Unit fills with cold water rinses for 0 seconds and drains. User can select hot, cold or purified water. Pure Water Rinse COLD - (DI Rinse) - Select number of rinses (0 to ). Select length of Pure Water Rinse (up to 0 minutes) Pure Water Rinse HOT - (DI Rinse) - Select length of Hot Pure Water Rinse (Up to 0 minutes) and temperature of water (up to 9 C) Drying - Programmable for up to 90 min and up to 0 C Cooling - User selects length of cooling (up to 0 minutes) Safety Features: Door Interlock Prevents interference with wash cycle once it is in operation Drop Down Door Eliminates the safety hazard associated with guillotine type doors Counterbalanced for safe operation LX Series - Pg
Optional Features: Steam Heating Stainless steel exchanger provides rapid heating of water in washer sump Drain Discharge Cool Down Wastewater cooled to <60 C Cold water added to effluent during drain phase Water Softener Softens incoming hot and cold water Automatic regeneration after each wash cycle with low salt alarm RS Port Kit Provides RS output for wash cycle process ph Special Programming Automatically adds base or acid solution to lower or raise ph level of effluent before discharge to building drain system Customized Programming Options Available for special requirements and wash applications Seismic Tie Down Kit Bracket allows for seismic anchoring External Printer For documenting evidence of cleaning process with detailed information Gravity Drop Drain Pneumatic valve to discharge wastewater to floor level drain Low Pressure Valve Kit Provides proper water pressure for purified water supply Steam Condenser Removes steam vapor when chamber temperature exceeds 0 C Directs all condensate to drain HAB Kit Stainless steel flanges allow for recessed installation of washer Chemical Dosing Pump For dosing of other types of chemicals to fit specific wash requirements Up to additional Third party testing Field labeling by independent NRTL (Nationally Recognized Testing Laboratory) for product safety certification Verify compliance with the UL Standard 600- Emergency Stop Button Shuts off all power to the washer Construction: Wash chamber and door Constructed of # sanitary AISI 6L stainless steel High-grade finish electronically welded under Argon protection Exterior AISI 0L stainless steel with # high-grade finish Components Constructed of stainless steel or other materials impervious to the effects of detergents, additives and general laboratory chemical residues Insulation Synthetic, rubber based closed cell foam Guards against heat loss and reduces noise level Accessories: Basic Starter Kit PS/7 IXLC basic basket/rack: cleans both large, open mouth glassware and miscellaneous lab items. Consists of 7 short and long injectors for washing inside narrow necked glassware and open basket surface Starter Kit PST basic basket/rack: cleans large, open mouth glassware and miscellaneous lab items 6 IXLC rack with short and long injectors: washes inside narrow necked glassware LTC mesh basket with lid: washes test tubes, stoppers, caps, other small items Manual Transfer Carts Of stainless steel allow for easy transfer of full racks between multiple locations Basic Basket Tray and Basket Tray with Spray Arm Washes glassware with large necks or openings such as beakers Mesh cover available for holding items on the basket during the wash cycle Injector Racks Various combinations of jets (including different quantities, different diameters, short and/or long lengths) Allows for washing a wide variety of glassware Mesh hold-down screen available to prevent glassware from becoming dislodged during wash cycle Stainless Steel Mesh Baskets For cleaning smaller items Lids available Combination and Specialty Racks For washing specific items such as pipettes or for multiple types of items on one rack Customized Accessories Modification of existing standard racks or baskets Creation of completely customized accessories Preventative Maintenance: Annual Preventative Maintenance agreements ensure optimum washer performance and extend equipment life Validation Services Installation Qualification and Operational Qualification (IQ/OQ) testing can be executed at the customer site Documentation only packages available separately Cleaning Chemicals: LANCERCLEAN Detergent ( formulas) LANCERACID Rinse ( formulas) Specially formulated for use in high pressure washers Required Utilities: Hot Water Shut off valve with a threaded / inch male hose thread nozzle needed Flow rate: / gal/min (0 l/min) with a pressure between 9 and 87 psig (00 to 600 kpa) Maximum temperature: 0 C ( F) Cold Water Shut off valve with a threaded / inch male hose thread nozzle Flow rate: / gal/min (0 l/min) with a pressure between 9 and 87 psig (00 to 600 kpa) Purified Water Shut off valve with a threaded / inch male hose thread nozzle Flow rate: / gal/min (0 l/min) with a pressure between 9 and 87 psig (00 to 600 kpa) Steam Feed (for steam option only) Shut off valve and flexible steam hose for connection to washer s / inch male BSP threaded inlet Steam Condensate Return (for steam option only) Shut off valve and flexible steam hose for connection to washers / inch male BSP threaded outlet Drain Connection Fixed standpipe and plumbing trap with a minimum inside diameter of / inches (0 mm) needed Height above finished floor level between and inches (800 to 900 mm) Flow rate: 0 / gal/min (0 l/min) AS AN OPTION unit can be configured for floor draining with optional floor drain kit Condensate Drain Connection (for steam condenser option only) Fixed standpipe and plumbing trap with a minimum inside diameter of / inches (0 mm) Height above finished floor level between 0 and inches (800 to 900 mm) Flow rate: gal/min (0 l/min) AS AN OPTION unit can be configured for floor draining with optional floor drain kit Exhaust Hood Preferred (unless room is well ventilated) Exhaust hood inches ( mm) min, 0 inches (0 mm) max above washer s exhaust pipes. Discharge flow rate: 60CFM; max temp 0 F (9 C), max relative humidity 9% Version - / LX Series - Pg
Electricity (electric models) 08 V, 60 Hz, -Phase, 7 kw, Amps 08 V, 60 Hz, -Phase, 0 kw, 8 Amps 0 V, 60 Hz, -Phase, 7 kw, Amps 0 V, 60 Hz, -Phase, 0 kw, 6 Amps 80 V, 60 Hz, -Phase, 0 kw, Amps Electricity (steam heated models) 08 V, 60 Hz, -Phase, kw, 0 Amps 08 V, 60 Hz, -Phase, kw, 0 Amps 0 V, 60 Hz, -Phase, kw, 9 Amps 0 V, 60 Hz, -Phase, kw, 9 Amps 80 V, 60 Hz, -Phase, kw, Amps Contact LANCER for Additional info on: Customization Maintenance Contracts Validation Services Cleaning Chemicals Version - / LX Series - Pg
Version - / 87mm [. ] 60mm [.78 ] FRONT NOTE: DIMENSIONS IN BRACKETS ARE IN MILLIMETERS 76mm [8.97 ] TOP WITH DOOR OPEN 67mm [6.0 ],68mm [6.08 ] 860mm [.8 ] RIGHT SIDE W/DOOR OPEN EXTERNAL DIMENSIONS LX TOLERANCE: ±.0" CHAMBER DIMENSIONS Height: 6.08" Width:.78" Depth: 8.97" Height:." Width:.00" Depth: 0.00" Required Utilities: Hot Water/Cold Water/Purified Water (each requires) - shut off valve (threaded ¾ inch male hose thread) / flow rate of ¼ gal/min (0 l/min), pressure between 9 and 87 psig (00 to 600 kpa) Steam Feed (for steam option only) shut off valve and flexible steam hose (connected to washers ½ inch male BSP threaded inlet) / steam pressure between 9 and 87 psig (00 to 600 kpa) / maximum consumption: 6 lbs/hr (66 lbs/cycle) typically cycle used per hour Steam Condensate Return (for steam option only) shut off valve and flexible steam hose (connected to washers ½ inch male BSP threaded outlet) Drain Connection fixed standpipe and plumbing trap (min. inside diam. ½ inches 0 mm) / height above finished floor - inches (800 900 mm) / flow rate: 0. gal/min (0 l/min). / AS AN OPTION unit can be configured for floor draining with optional floor drain kit Compressed Air (for gravity drop drain only) shut off valve with /8 inch hose barb fitting, air pressure between 60-0 PSI (consumption is minimal) Exhaust Hood Preferred (unless room is well ventilated) min. air gap, max. 0 (Flow rate 60 cfm) Electricity (electric models) 08 V, 60 Hz, -Phase, 7 kw, Amps 08 V, 60 Hz, -Phase, 0 kw, 8 Amps 0 V, 60 Hz, -Phase, 7 kw, Amps 0 V, 60 Hz, -Phase, 0 kw, 6 Amps 80 V, 60 Hz, -Phase, 0kW, Amps Electricity (steam heated models) 08 V, 60 Hz, -Phase, kw, 0 Amps 08 V, 60 Hz, -Phase, kw, 0 Amps 0 V, 60 Hz, -Phase, kw, 9 Amps 0 V, 60 Hz, -Phase, kw, 9 Amps 80 V, 60 Hz, -Phase, kw, Amps 0 0 REV. 8//0 0/06/09 DATE Drawing # LX Tag # Update Utility Information Revision MODIFICATIONS - REVISIONS Title: - GENERAL DRAWING OF THE WASHER - LANCER LX Drawn by: MB Checked by: Scale: /6 Sheet: / This plan is the exclusive property of LANCER INDUSTRIES and shall not be disclosed or reproduced without its written authorization. LX Series - Pg
LANCER Glassware Washing Accessories
Lancer Washing Accessories: flexibility is the key to efficient cleaning Lancer Washers With over years of experience, Lancer is the industry leader in washing equipment. Providing glassware washers to the technological marketplace, Lancer offers a solution to suit any cleaning application. Lancer Glassware washers range from undercounters to free-standing units with varying capacities to suit any wash load. A variety of racks and accessories are available to accommodate all types of glassware and laboratory items. This brochure provides a comprehensive listing of accessories as well as rack placement guides to provide the information you need to choose the right accessory based on your glassware loads and wash cycle needs. Table of Contents Washing Accessories (80 LX/8 LX/80 LX /90 LX / LX /800 LXA)... Washing Accessories ( LXP)...6 Washing Accessories (600 LXP)...8 Rack Position Guides...0 Lancer offers the widest range of washers and accessories. If you have any questions or for further details please contact a Lancer Sales Representative at (800)-8 or visit our website at www.lancer.com. Lancer Glassware Washer Accessories
Lancer Washing: User Friendly Loading Systems p Telescopic Rails: baskets are mounted on fully load bearing rails in the extended position allowing for ease of loading and unloading of glassware. p Glassware Height Adjustment: adjustable star feet allow for various heights of glassware to be washed in the same load. Glassware is placed at the right position to obtain the optimum cleaning and drying results. p Customized Grids: adjustable and fixed support grids are available to optimize load patterns. Interchangeable Accessories p Utilizing the independent water connections at each level allows for baskets to be interchanged among levels, reducing the number of required accessories. p The 90 LX, LX, LXP, 600 LXP and 800 LXA washers are equipped with an additional water connection, allowing for placement of accessories at the required height depending on load configuration. Flexibility: 90 LX chamber shown with two accessories in three different loading configurations. Powerful Glassware Cleaning and Drying p Top and bottom spray arms ensure accurate cleaning of the outside surfaces of the glassware. p Independent water connections on each level guarantee optimal water pressure for cleaning the internal surfaces of the glassware. p Direction Injection Drying: hot air is directed through rack injectors and circulated throughout the washer chamber to ensure rapid drying of the glassware. (On models equipped with injection drying.) Lancer Glassware Washer Accessories
Washing Accessories for models: 80 LX / 8 LX / 80 LX / 90 LX / LX / 800 LXA LX 800 LXA 90 LX 80 LX 80 LX/8 LX 00 Injector Racks: mm diam short jets p small narrow neck glassware p 8 IXA - 8 jets p 6 IXA - 6 jets p IXA - jets p GCI - Cover for injector racks p GCI / - Half cover IXA Rack & 6 mm diam short jets IXLC Rack p small narrow neck glassware p 6 IXA/ - 6 jets p IXA/ - jets IXL Rack 6 mm diam short jets GCI Cover p 7 IXC / - half rack 7 jets p 6 IXC - 6 jets p IXC - jets p 8 IXC - 8 jets p IXC - jets 00 6 mm diam long and short jets p 6 IXLC - 6 jets p 8 IXLC - 8 jets p 6 IXLC - 6 jets p IXLC - jets 6 mm diam long jets p 0 IXL D6-0 jets p 6 IXL - 6 jets p 8 IXL - 8 jets p 6 IXL - 6 jets 8 mm diam long jets p 0 IXL - 0 jets Lancer Glassware Washer Accessories
00 00 PST Basket LTC / Basket PIP Rack STC Basket Basic Baskets: p beakers p cones p trays p dishes p dissolution vessels p reaction flasks p funnels p instruments p jars p PST - Basic basket p PSBT - Basic basket with spray arm 00 00 p GC - Cover for PST/PSBT p GC / - Half cover Small Mesh Baskets: p bottle caps p ferrules p plugs p stoppers p test tubes p STC STC / - short basket (WITH cover) p LTC LTC / - tall basket (WITH cover) p PPM - fine mesh for small items (attached cover) - mm x mm x 9 mm p PPM 80 - fine mesh for small items (attached cover) - 80 mm x 80 mm x mm Pipette Racks: p pipettes p PIP - grommet style p PPI B/B - canister style 00 00 00 PS 7 IXLC Rack BP Rack TN Trolley 00 Multipurpose Racks : p beakers p cones 00 00 p trays p dishes p dissolution vessels p reaction flasks p funnels p instruments p jars p PS/7 IXLC - / PST basket / 7 jets p PIP/0 IXLC - / pipettes 0 jets p EP/ IXLC - vol flasks jets p 0PIP/ IXLC - / pipette rack jets p PS/ IXLC/ PIP - PST pipettes jets Other Applications : p thin plates p culture dishes p watch glasses p 0 PL - Basket for thin plates p BP - Basket for culture dishes p SSC SSL - Supports p VM / - / basket for watch glasses Storage / Transport: Storage and transport of Lancer Accessories. p p p p RP - Stand to hold racks TN 90 LX - Door plus upper level trolley TN LX - Door plus two upper levels trolley TN 8 LXA - Door plus three upper levels trolley Base Cabinets : Stainless steel base cabinet for undercounter washers only. p p CAPN 8LX - SS plinth for 80 LX and 8 LX CAPN 8LX - SS plinth for 80 LX Lancer Glassware Washer Accessories
Washing Accessories for model: LXP LXP Injector Racks: mm diam short jets p small narrow neck glassware p 8 IXA LXP - 8 jets p IXA LXP - jets 00 p GCI LXP - Cover for injector racks IXA Rack p GCI / LXP - / Cover for injector racks IXL Rack IXC Rack & 6 mm diam short jets p small narrow neck glassware p 6 IXA/ LXP - 6 jets p 8 IXA/ LXP - 8 jets p IXA/ LXP - jets 6 mm diam short jets p 8 IXC LXP - 8 jets p 6 IXC LXP - 6 jets p 8 IXC LXP - 8 jets p IXC LXP - jets GCI Cover 00 6 mm diam long and short jets p IXLC / LXP - half rack jets p 6 IXLC LXP - 6 jets p 8 IXLC LXP - 8 jets p 6 IXLC LXP - 6 jets p 8 IXLC LXP - 8 jets 6 mm diam long jets p IXL LXP - jets p 6 IXL LXP - 6 jets p 8 IXL LXP - 8 jets p 6 IXL LXP - 6 jets 8 mm diam long jets p IXL LXP- jets p 9 IXL LXP - 9 jets 6 Lancer Glassware Washer Accessories
00 00 PSBT Basket LTC / Basket Basic Baskets: p beakers p cones p trays p dishes p dissolution vessels p reaction flasks p funnels p instruments p jars p PST LXP- Basic basket p PSBT LXP - Basic basket 00with spray arm 00 p GC LXP - Cover for PST/PSBT p GC / - Half cover Small Mesh Baskets: p bottle caps p ferrules p plugs p stoppers p test tubes p STC STC / - short basket (WITH cover) p LTC LTC / - tall basket (WITH cover) 00 EP/IXLC Rack RP Stand 00 Multipurpose Racks : p beakers p cones p trays p dishes p dissolution vessels p reaction flasks p funnels p instruments p jars p PIP/ IXLC LXP - / pipette rack jets p EP/ IXLC LXP - vol flasks jets p PS/ IXLC LXP - PST jets Storage/Transport: Storage and transport of Lancer Accessories. p RP LXP - Stand to hold racks p TN LXP - Door plus upper level trolley STC Basket Pipette Racks: p pipettes p PIP LXP - grommet style p PPI B LXP - canister style PIP Rack Lancer Glassware Washer Accessories 7
Washing Accessories for model: 600 LXP 600 LXP 00 Injector Racks: mm diam short jets p small narrow neck glassware p IXA 6 - jets p IXA 6 - jets p GCI 6 - Cover for injector racks IXA Rack & 6 mm diam short jets p small narrow neck glassware IXLC Rack p IXA/ 6 - jets p IXA/ 6 - jets IXL Rack 6 mm diam short jets p 6 IXC 6-6 jets p 6 IXC 6-6 jets p 80 IXC 6-80 jets p IXC 6 - jets p IXC 6 - jets GCI Cover 00 6 mm diam long and short jets p 6 IXLC 6-6 jets p 6 IXLC 6-6 jets p 80 IXLC 6-80 jets p IXLC 6 - jets 6 mm diam long jets p 6 IXL 6 D6-6 jets p 6 IXL 6 - jets p 80 IXL 6-80 jets p IXL 6 - jets 8 mm diam long jets p 6 IXL 6-6 jets 8 Lancer Glassware Washer Accessories
GC Cover 00 Basic Baskets: p beakers p cones p trays p dishes p dissolution vessels p reaction flasks p funnels p instruments p jars p PST 6 - Basic basket p PSBT 6- Basic basket with spray arm p GC 6 - Cover for PST/PSBT BP Rack Other Applications: p thin plates p culture dishes p wtch glasses p BP 6 - Basket for culture dishes p SSC 6 SSL 6 - Supports p SSC / PS 6 SSL / PS 6 - Supports p VM / 6 - / basket for watch glasses LTC Basket Small Mesh Baskets: p bottle caps p ferrules p plugs p stoppers p test tubes p STC STC / - short basket (WITH cover) p LTC LTC / - tall basket (WITH cover) TN Trolley Storage/Transport: Storage and transport of Lancer Accessories. p RP 6 - Stand to hold p p racks TN 6 - Door plus three upper level trolley NB 6 - Door level trolley Pipette Racks: p pipettes p 0/0 PIP 6 - grommet style PIP Rack Lancer Glassware Washer Accessories 9
Rack Position Guide Available Basket Heights PST PSBT IXL IXC 9 0 8.9 80 6.7 70 7. 90 6.9 7 6.7 7.7 9 7. 8 80 LX/8 LX/80 LX Available Basket Heights PST PSBT IXL IXC 8. 0 7.9 0 6 6. 66 6 PST PSBT IXL IXC 0 0. 0 7.7 9 9 0 0.6 70 8. 60 90 LX Top Chamber View (Inches and mm shown) Top Chamber View (Inches and mm shown) 9.7 ( mm) 9.7 (9 mm).0 (0 mm) 9.7 (9 mm) 6 Available Basket Heights PST PSBT IXL IXC 6.6 70.7 0. 6 7 80.8 7.7 96.9 6 6 7 8 PST PSBT IXL IXC 9. 0 9. 60 0. 60..9 7 7 80. 70.8 60.9 6 LX Available Basket Heights PST PSBT IXL IXC 9.06 0 7.09 80.99 0 9.06 0 9.9 6 6. 7 8 8 7.09 80.96 80 9 0 PST PSBT IXL IXC.8 7.7 0 9. 70.7.9 9.8 0 7.7 0.7 7.6 700 6. 6 LXP Top Chamber View (Inches and mm shown) 7 0 Top Chamber View (Inches and mm shown) 7 0. (60mm) 9.7 (9 mm) 6 8 9 0. (770mm).9 (8 mm) 6 8 9 0 Lancer Glassware Washer Accessories
Available Basket Heights PST PSBT IXL IXC Available Basket Heights 600 LXP PST PSBT IXL IXC 8. 06 9.06 0 0. (770mm).9 7.99 76 7.09 80.99 0 Top 9. (9 mm) 9. (9 mm).98 9.06 0... 6 6.6 68 9.9 6 6. 7 8 8 7.09 80.96 80 9 0 6 7. 7 8 8 9.8 0.66 (8mm) PST PSBT IXL IXC.8 7.7 0 9. 70 0.66 7. 89 Top Chamber View.7.9 (Inches and mm shown).79 (6 mm) Chamber View (Inches and mm shown).. 8 6.88 9.06 8.8 80 9.8 0 7.7 0.7 7.6 700 6. 6 7.0 79. 08.0 9.80 0.6 89 800 LXA 6 7 6 7 8 8.6 9.70 8.98.7 0. 77 8 9 9 0 0 9. 6.6 68 Accessory Part Number Guide: All Models Injector Racks: IX L LXP D6 = number of injectors IX = rack type L = length of injectors p L = long injectors p C = short injectors p LC = mix long & short injectors p A = mm diam. injectors p C = short injectors p CM = mix of short 6 mm & mm diam. injectors p A/ = mix of short 6 mm & mm diam. injectors LXP = washer model p None = for models 80 LX, 8 LX, 80 LX, 90 LX, LX, 800 LXA p LXP = for model LXP p 6 = for model 600 LXP D6 = special diameter injectors p D6 = 6 mm (8 mm standard diam.) p D8 = 8 mm (6 mm standard diam.) Basic Basket: PST 6 PST = basket type p PST = basic basket for bottom level p PSBT = basic basket with spray arm for upper levels 6 = washer model p None = for models 80 LX, 8 LX, 80 LX, 90 LX, LX, 800 LXA p LXP = for model LXP p 6 = for model 600 LXP Mesh Baskets: STC / STC = basket height p STC = 9 mm p LTC = 6 mm / = basket length p None = mm p / = 09 mm Pipette Racks: 0 PIP 6 0 = number of pipette inserts PIP = pipette basket type 6 = washer model p None = for models 80 LX, 8 LX, 80 LX, 90 LX, LX, 800 LXA p LXP = for model LXP p 6 = for model 600 LXP Lancer Glassware Washer Accessories
Lancer USA Inc State Rd 9 Winter Springs, FL 708 Toll Free: (800)-8 Phone: (07)7-888 Fax: (07)7-9 sales@lancer.com www.lancer.com JJD 8 008 LANCER Sales USA Inc. LANCER is a registered trademark. LANCER is constantly reviewing its products for improvements. Consequently, the actual products may slightly differ from the products pictured and described here. Printed in the USA.