s valid until 31st December 2016
FREE Electrode 3510 ph Meter plus FREE electrode Simultaneous readout of ph and temperature ph resolution to 3 decimal places 1, 2 or 3 point calibration Automatic or manual buffer selection Storage of up to 32 results RS232 connection to printer or PC via DataWay Choose from the following free electrodes to go with your ph meter 924 030 - Semi-micro, glass bodied for use in biological buffers, blood and protein samples 924 076 - General purpose, glass bodied for Tris buffers and high accuracy measurements 7315 UV/Visible Spectrophotometer Spectrum scanning across entire wavelength range Results and method saving to USB memory stick Icon driven software Autologging capabilities Press to read xenon lamp 3 year warranty including xenon lamp Extensive range of accessories available 15179702 7315 2577.00 15189702 3510 and 924030 417.00 15199702 3510 and 924076 417.00 Genova Nano Micro-volume, Life Science Spectrophotometer Micro-volume, life science and standard spectrophotometer Ideal for DNA, RNA and Protein measurements Only 0.5µl sample volume required Detects DNA concentrations as low as 2ng/µl Method and result saving to USB memory stick 3 year warranty including xenon lamp Genova Plus Life Science Spectrophotometer Life Science Spectrophotometer 5nm spectral bandwidth Absorbance range -0.3 to 2.5A Pre-programmed for DNA/RNA analysis Purity scan across entire wavelength range Pre-programmed methods for protein analysis Standard spectrophotometer functions Press to read xenon lamp Icon driven software Small footprint Method and result saving to USB memory stick 3 year warranty including xenon lamp 15296600 Genova Nano 4550.00 12201012 Genova Plus 3111.00
Incubators with Orbital Shaker The SI600 has been designed to offer all the features of the hugely successful SI500, but with a significantly larger capacity, 115L compared to 51L for the SI500. In terms of capacity that means the SI600 can comfortably accommodate 6 x 2000ml flasks or 8 x 1000ml flasks while still remaining a compact benchtop incubator. Combined shaker and incubator ideal for cell culture procedures Highly flexible, can shake microtubes, culture tubes, flasks or microtitre plates Digital LED display for easy speed and temperature control Clever retractable platform allows easy access to incubator contents Wide range of stainless steel accessory racks are available, no tools required With BioCote antimicrobial protection SSL1, Orbital Shaker Smooth orbital shaking action Orbit of 16mm is ideal for larger samples, for example multi-well plates Built-in digital timer Variable speed control to 300rpm Supplied with accessory cradle system for flasks and bottles 15139722 SSL1 1032.00 15159712 SI600 2918.00 FREE ACCESSORY PACK FREE Tier System SSM3, SSM4 Rockers with FREE Tier System Gentle see-saw and 3D gyratory action available Digital speed control with built-in timer and LCD display 3-tier system to triple capacity SA8 Vortex Mixer With FREE Accessory Pack worth 71 Variable speed control between 200 and 2500rpm Intermittent or continuous mode Robust die-cast construction SA8/1 Accessory Pack 1 x plastic cradle for standard microtitre plate 1 x circular foam insert for beakers and flasks 1 x rectangular foam insert (holds 8 x 0.2ml, 8 x 0.5ml and 16 x 1.5ml microcentrifuge tubes), 1 x solid rectangular foam insert 15119722 SSM3 528.00 15129722 SSM4 416.00 15179722 SA8 205.00
Package Package SS10, Overhead stirrer Overhead stirrer, general purpose Used with volumes up to 15 litres Aqueous to low viscosity liquids Package offer includes: SS10/1 general purpose stand and SS10/11 large paddle head and SS10/5 paddle rod with either model SS10 or SS20 units. SS20, Overhead stirrer Overhead stirrer, high performance Used with volumes up to 25 litres Low to medium viscosity liquids Package offer includes: SS10/1 general purpose stand and SS10/11 large paddle head and SS10/5 paddle rod with either model SS10 or SS20 units. 15179712 SS10 609.00 15169712 SS20 704.00 EM Electromantles 250ml, 500ml Sizes, Controlled The safest heating mantles on the market Innovative design to prevent outer casing from getting hot Maximum element temperature of 450 C Built-in controller Replaceable insulated heater cartridge A chemically resistant polypropylene outer casing SMP20, Digital Melting Point Digital selection & display of temperature Accuracy of 0.1 degree resolution Easy to operate with plateau facility Ideal for educational use Order a SMP20 for the same price as a SMP10 save up to 253. Please use order code 15169722 15159732 250ml 181.00 15169732 500ml 195.00 15169722 SMP20 534.00
UC152D Digital Hotplate Stirrer Chemically resistant ceramic top plate Flashing Hot warning light, mains independent Digital display of hotplate surface temperature Compact space saving design US152D Digital Hotplate Stirrer Coated aluminium top plate Flashing Hot warning light, mains independent Digital display of hotplate surface temperature Compact space saving design 15318634 UC152D 266.00 15388614 US152D 257.00 Package Package includes hotplate stirrer, SCT1 temperature controller, retort rod & probe holder. UC152 OR US152 Hotplate Stirrer PLUS SCT1, Temperature controller Choice of top plate: Robust coated aluminium or chemically resistant ceramic Flashing Hot warning light, mains independent Accurate temperature control with LED indicator scale Accurate liquid temperature control Built in retort fitting and probe holder Detachable temperature probe Bright, easy to read LED display Compact and light weight Comprehensive range of accessories 15129712 UC152 with SCT1 package 450.00 15119712 US152 with SCT1 package 441.00 SB500, Analogue Hotplate, 30x50cm 15149712 SB500 548.00 Aluminium/silicon alloy top plate Large plate area ideal for heating multiple vessels Accommodates up to 30 x 100ml beakers
3PrimeG, Personal Gradient Thermal Cycler Colour touchscreen interface for fast program setup 48 x 0.2ml block with 14ºC gradient Fast ramp rate up to 3.0 C/sec Data transfer and program cloning via USB Backed by Techne s 4 year warranty 12658875 3PrimeG 2280.00 PrimeG, Gradient Thermal Cycler Colour touchscreen interface for fast program setup 96 x 0.2ml block with 29ºC gradient Fast ramp rate up to 3.4 C/sec Data transfer and program cloning via USB Backed by Techne s 4 year warranty 12688885 PrimeG 2850.00 FREE BLOCK INSERTS DB100/2, 2-Position Dri-Block Can hold up to 2 aluminium insert blocks or one 96-well plate block Temperature range from ambient to 100 C Fast heat-up rate 30 C to 100 C from just 8 minutes Temperature stability ±0.15ºC at 100ºC Package includes: DB100/2 dri-block heater with 2 x FREE block inserts. See offer order codes for available options. 15129732 DB100/2 plus 1 x block 30 x 0.5ml tubes and 1 x block 20 x 1.5ml tubes 624.00 15109732 DB100/2 plus 2 x blocks for 20 x 1.5ml tubes 624.00 NEW Prime Pro 48 Real-time qpcr system 15393155 Prime Pro 48 12000.00 Trust your results with ±0.1 C uniformity typically 5x better than the competition 40 cycles in 40 minutes (20 minutes when optimised) Ramp rate average 5.5 C/sec Adaptive LED control never saturate the detector, never get crosstalk, always maximise the range of detection 4 colour multiplex Also available Prime Pro qpcr reagent kits 400 qpcr detection kits manufactured in the UK Suitable for Prime Pro 48 and all other qpcr machines. Kits are lyophilised and shipped in ambient conditions. Human pathogen testing kits. Veterinary pathogen testing kits. Agricultural pathogen testing kits. Food and water testing kits. Bio-threat detection kits.
Slide Drying Bench For the drying of mounted tissue samples. Black surface gives good visibility of samples Capacity for 50 slides which can be arranged in different orientations Set temperature up to 100 C Removable support bars to allow slides to lay flat 15388644 MH6616 326.00 Paraffin Wax Dispenser Enables routine tissue embedding to be easy and mess free. Designed for use with paraffin wax with a melting range from 45 C to 65 C. Key features include: Heated tap to prevent wax solidification PTFE lining makes it virtually maintenance free and easy to clean Added safety feature which warns if the wax temperature is above the set temperature None drip nozzle on the tap 15338654 MH8523B 1491.00 Paraffin Flotation Bath Allows quick, clean and crinkle free sample mounting after microtome sectioning. Black PTFE interior gives high contrast for viewing specimens Temperature control as opposed to arbitrary power control Improved temperature accuracy Improved temperature stability of ±0.5 C Overheating prevented with new temperature control mechanism Improved heat up rates 45 C typically achieved within 40 minutes with 2.25L of water SRT6D, SRT9D Digital tube rollers Rocking and rolling action for complete mixing Digital variable speed models with integrated timer Six roller design with small footprint or nine roller model for high throughput Designed for continuous or timed quiet operation Can be used in cold rooms or in incubators 15318654 MH8517 423.00 15149722 SRT6D 681.00 15159722 SRT9D 789.00 SB3 Rotator with FREE Tube holder FREE Tube Holder Provides constant effective mixing action Package includes rotator plus micro centrifuge tube holder, test/blood tube holder OR 50ml centrifuge tube holder. 15189712 SB3 rotator with SB3/1 1.5ml micro centrifuge tube holder 368.00 15199712 SB3 rotator with SB3/2 Test tube/blood tube holder 368.00 15109722 SB3 rotator with SB3/3 50ml centrifuge tube holder 368.00
2016 Thermo Fisher Scientific Inc. All rights reserved. Trademarks used are owned as indicated at www.fishersci.com/trademarks. Austria: +43(0)800-20 88 40 Belgium: +32 (0)56 260 260 Denmark: +45 70 27 99 20 Germany: +49 2304 932-5 Ireland: +353 (0)1 885 5854 Italy: +39 02 950 59 478 Finland: +358 (0)9 8027 6280 France: +33 (0)3 88 67 14 14 Netherlands: +31 (0)20 487 70 00 Norway: +47 22 95 59 59 Portugal: +351 21 425 33 50 Spain: +34 902 239 303 Sweden: +46 31 635 32 00 Switzerland: +41 (0)56 618 41 11 UK: +44 (0)1509 555 500 11629_EN_UK