Heating & Holding Cabinets

K Heating & Holding Cabinets In This Section Heated Cabinet/Proofer K-1...254 Universal Heated Proofer K-2...256 Holding Cabinets Stainless Steel K-3...258 Humidified Holding Cabinets K-4...260

Heated Cabinet/Proofer JOB ITEM # QTY # MODEL NUMBER 915-H 934-H 934-H-LD 1034-LD 1015 (Insulated) 1034 (Insulated) 934-H 915-H PIPER S SUPERIOR FOUNDATION Featured on our toughest racks: Two 14 gauge aluminized steel reinforcing channels support our.125 thick aluminum bottom panel. The edges are formed and rolled to create a built-in bumper andheavy duty plate casters make this the strongest foundation in the industry. Piper s aluminum Heated Cabinets /Proofers are designed with features to make your operation efficient. Controls can be easily accessed at the front of the Cabinet without opening the doors and the entire heater unit can be removed for cleaning and maintenance. STANDARD FEATURES Base is a solid bottom constructed of.125 aluminum, rolled edge base acts as a built-in bumper Two 14-gauge aluminized steel reinforcing channels attach the casters and support the bottom panel Frame consist of four extruded channels 1-1/2 x 5/8 x.094 aluminum. Corners have.190 channel supports for reinforcement Double pan top constructed of two.080 thick aluminum panels, fully welded corners Glides are channels spaced on 1-1/2 centers with 5/8 ledge,.090 thick extruded aluminum continuously welded to the frame Door panel is.125 PVC coated aluminum attached to cabinet with bakery hinges, 270 degree door swing with card clip Back panel is.080 aluminum fully welded with removable multiple louvered vent stack 1/2 extruded aluminum tie bar keeps cabinet square 16-gauge stainless steel positive gravity latch is provided to keep door closed during transport Stainless steel side door latch holds door open One inch insulation surround the cabinet (Insulated models only) Card clip, easy identification of cabinet content when door is closed DIMENSIONS 915-H - 40-3/4 H x 21-1/2 W x 31 D 934-H - 68-3/4 H x 25W x 31 D 934-H-LD - 68-1/8 H x 21-1/2"W x 31 D 1034-LD - 68-1/8 H x 21-1/2 W x 31 D 1015 (Insulated) - 40-3/4 H x 21-1/2 W x 31 D 1034 (Insulated) - 68-1/8 H x 21-1/2 W x 31 D HEAT SYSTEM Individual heat and food moisture controls Digital read-out for accuracy Stainless steel 1 gallon water pan Unit removable for easy cleaning & maintenance 60 minute timer 120 volt, 12.5 AMP, 1500 Watts HEAVY-DUTY CASTERS 5 diameter x 1/1/4 wide swivel sealed wheels, two with brakes 350 lb. capacity Maximum resistance to chemicals, acids, bases, alcohol, water and steam Maximum low temperature flexibility or superior performance even in freezing temperatures COMMON OPTIONS Lexan full-view door Push handle Dutch doors Personalized embossment See reverse side for additional options WARRANTY One year parts and labor. Warranty is detailed on inside front cover of the price list. SPEC K-1 254

Heated Cabinet/Proofer Glides are channels spaced on 1-1/2 centers with 5/8 ledge 27" Shown with optional Bumper Glides Model # Description (A) Height Width Depth Channel Spacing 18x26 Pan Capacity Ship Wt.(lbs) NON-INSULATED 915-H half size 40-3/4 21-1/2 31 1-1/2 15 140 100 934-H full size 68-3/4 21-1/2 31 1-1/2 34 190 100 INSULATED 1015 half size 40-3/4 21-1/2 31 1-1/2 15 160 100 1034 full size 68-1/8 21-1/2 31 1-1/2 34 260 100 Shipping Class All models 120 volt, 12.5 APM, 1500 watts OPTIONS / ACCESSORIES (LD) Lexan full-view door (DD) Dutch door, only available on 941 units (CH) Chest handles, set of 2 (EMB) Personalized embossment, 12 letters per line (PH) Push handle (I) Insulating transport cabinet (B) Set of 4 non-marking rubber corner bumpers (PB) Full perimeter non-marking bumper (Add 2" to overall width and depth) (WB) Wheel brakes, set of 2 (5x2) Heavy-duty casters, set of 4 (CP) Correctional package, includes welded casters and hole in door latch for paddlelock DEGREES FAHRENHEIT TEMPERATURE PROFILE 220 205 190 175 160 145 130 115 Preheat Time 100 Recovery Time 85 70 0 1 HR 2 HR 3 HR 4 HR 5 HR 6 HR (CHT-2) Canned Heat Tray Insert (Y4) Polyurethane 4" casters (set of 4) (Y5) Polyurethane 5" casters (set of 4) (FL) Floor Lock K-1 SPEC LIMITED WARRANTY: PIPER PRODUCTS warrants to the original purchaser parts and labor for a period of twelve (12) months from the date of purchase. See manufacturer s complete warranty for details. It is our policy to build equipment which is design certified by companies that have been accredited at the Federal Level by the Occupational Safety and Health Agency (OSHA) and ANSI as a National Recognized Testing Laboratory. These companies include CSA International, Underwriters Laboratories, and the National Sanitation Foundation. However, a continuing program of product improvement makes it necessary to submit new models to the agencies as they are developed. Consequently, all models may not bear the appropriate labels at all times. We reserve the right to change specifications and product design without notice. Such revisions do not entitle buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Information is not for design purposes. 255

Universal Heated Proofer JOB ITEM # QTY # MODEL NUMBER 934-HU (non-insulated) 1012-U (insulated) 1012-U PIPER S SUPERIOR FOUNDATION Featured on our toughest racks: Two 14 gauge aluminized steel reinforcing channels support our.125 thick aluminum bottom panel. The edges are formed and rolled to create a built-in bumper and heavy duty plate casters make this the strongest foundation in the industry. Piper s aluminum Heated Cabinets /Proofers are designed with features to make your operation efficient. Controls can be easily accessed at the front of the Cabinet without opening the doors and the entire heater unit can be removed for cleaning and maintenance. STANDARD FEATURES Base is a solid bottom constructed of.125 aluminum, rolled edge base acts as a built-in bumper Two 14-gauge aluminized steel reinforcing channels attach the casters and support the bottom panel Frame consist of four extruded channels 1-1/2 x 5/8 x.094 aluminum. Corners have.190 channel supports for reinforcement Double pan top constructed of two.080 thick aluminum panels, fully welded corners Universal Glides are adjustable on 3 centers to accommodate various steam table and sheet pan sizes Door panel is.125 PVC coated aluminum attached to cabinet with bakery hinges, 270 degree door swing with card clip Back panel is.080 aluminum fully welded with removable multiple louvered vent stack 1/2 extruded aluminum tie bar keeps cabinet square 16-gauge stainless steel positive gravity latch is provided to keep door closed during transport Stainless steel side door latch holds door open One inch insulation surround the cabinet (Insulated models only) Card clip, easy identification of cabinet content when door is closed HEAT SYSTEM Individual heat and food moisture controls Digital read-out for accuracy Stainless steel 1 gallon water pan Unit removable for easy cleaning & maintenance 60 minute timer 120 volt, 12.5 AMP, 1500 Watts HEAVY-DUTY CASTERS 5 diameter x 1/1/4 wide swivel sealed wheels 350 lb. capacity Maximum resistance to chemicals, acids, bases, alcohol, water and steam Maximum low temperature flexibility or superior performance even in freezing temperatures COMMON OPTIONS Lexan full-view door Push handle Dutch doors Personalized embossment See reverse side for additional options WARRANTY One year parts and labor. Warranty is detailed on inside front cover of the price list. SPEC K-2 256

Universal Heated Proofer Universal glide easily adjustable Model # Description (A) Height Width Depth Channel Spacing Set of Glides 12x20 Pan Capacity 18x26 Tray Capacity UNIVERSAL LEDGE 2-1/2 4 6 934-HU non-insulated 68-7/8 25 31 3-1/8 12 24 24 6 12 240 1012-U insulated 67-1/2 31 30 1/2 3-1/8 12 24 24 6 12 260 Ship Wt.(lbs) Pan glides are adjustable on 3 1/8" centers. Universal models shipped with 12 sets of glides, units can hold 16 sets All models 120 volt, 12.5 APM, 1500 watts OPTIONS / ACCESSORIES (109497) Set of glides (LD) Lexan full-view door (DD) Dutch door, only available on 941 units (CH) Chest handles, set of 2 (EMB) Personalized embossment, 12 letters per line (PH) Push handle (I) Insulating transport cabinet (B) Set of 4 non-marking rubber corner bumpers (PB) Full perimeter non-marking bumper (Add 2" to overall width and depth) (WB) Wheel brakes, set of 2 (5x2) Heavy-duty casters, set of 4 (CP) Correctional package, includes welded casters and hole in door latch for paddlelock (CHT-2) Canned Heat Tray Insert (Y4) Polyurethane 4" casters (set of 4) (Y5) Polyurethane 5" casters (set of 4) (FL) Floor Lock DEGREES FAHRENHEIT TEMPERATURE PROFILE 220 205 190 175 160 145 130 115 Preheat Time 100 Recovery Time 85 70 0 1 HR 2 HR 3 HR 4 HR 5 HR 6 HR K-2 SPEC LIMITED WARRANTY: PIPER PRODUCTS warrants to the original purchaser parts and labor for a period of twelve (12) months from the date of purchase. See manufacturer s complete warranty for details. It is our policy to build equipment which is design certified by companies that have been accredited at the Federal Level by the Occupational Safety and Health Agency (OSHA) and ANSI as a National Recognized Testing Laboratory. These companies include CSA International, Underwriters Laboratories, and the National Sanitation Foundation. However, a continuing program of product improvement makes it necessary to submit new models to the agencies as they are developed. Consequently, all models may not bear the appropriate labels at all times. We reserve the right to change specifications and product design without notice. Such revisions do not entitle buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Information is not for design purposes. 257

Holding Cabinets Stainless Steel JOB ITEM # QTY # MODEL NUMBER 1008-SS 1016-SS 1016-SS-D DIMENSIONS 1008-SS 1016-SS 1016-SS-D H48.875" x W29.75" x D31.625" H74.75" x W29.75" x D31.625" H74.75" x W29.75" x D31.625" HEAT SYSTEM Individual heat and food moisture controls Digital read-out for accuracy Stainless steel 1 gallon water pan Unit removable for easy cleaning & maintenance 60 minute timer 1016-SS 1008 Piper Holding Cabinets are perfect for maintaining temperatures up to 225 degrees fahrenheit.* A member of our Chef System TM line, this cabinet utilizes separate heat and humidity controls for precise control over the holding environment. This allows the unit to be used for holding, warming, and proofing. It is available in multiple configurations, including a warmer with single or dutch doors, a double warmer with individually controlled holding sections, or a half size warmer for smaller operations. Each is designed to hold 18 x 26 bun pans or 12 x 20 steam table pans. STANDARD FEATURES Precise Temperature to 225 and Humidity Control Stainless Steel Construction All exterior walls formed from 20 gauge stainless steel type 304 Two inch insulation surrounds the entire cabinet 1 x 2-1/2 fully welded steel foundation HEAVY DUTY DOOR Fully insulated Full perimeter high-temp gasket Stainless Steel or Glass full-view panel 1 x 2-3/4 extruded frame Left hinge standard, right hinge available. Please specify upon ordering FLEXIBLE PAN GLIDE SYSTEM Removable chrome racks with adjustable spacing every 1.5 Accommodates 18 x 26 bun pans or 12 x 20 steam table pans Removable for easy cleaning WARRANTY One year parts and labor. Warranty is detailed on front cover of the price list. inside SPEC K-3 258

Holding Cabinets Stainless Steel Interior View Control Panel View HOLDING CABINET SPECIFICATIONS Model# Description Height Inches Width Inches Depth Inches Glide Spacing 18 x 26 Capacity 12 x 20 Capacity Ship Wt. (lbs) Voltage Watts Amps NEMA 1008-SS Half size 48.875" 29.75" 31.625" 1.5" 8 16 280 120v 2000 16.7 5-20P 1016-SS Full size 74.75" 29.75" 31.625" 1.5" 16 32 460 120v 2750 22.9 5-30P 1016-SS-D Double Unit 74.75" 29.75" 31.625" 1.5" 16 32 460 120v 4000 33.3 5-50P Height includes casters. Typical freight class: 100 Holds: 18 x 26 bun pans, 12 x 20 steam table pans. Applications: Meat, Poultry, Fish, Vegetables, Casseroles, Bakery rolls, Etc. OPTIONS / ACCESSORIES Full perimeter bumper (PB) Pass-thru Door (PT) Glass full-view door (GL) Locking Hasp (LH) K-3 SPEC LIMITED WARRANTY: PIPER PRODUCTS warrants to the original purchaser parts and labor for a period of twelve (12) months from the date of purchase. See manufacturer s complete warranty for details. It is our policy to build equipment which is design certified by companies that have been accredited at the Federal Level by the Occupational Safety and Health Agency (OSHA) and ANSI as a National Recognized Testing Laboratory. These companies include CSA International, Underwriters Laboratories, and the National Sanitation Foundation. However, a continuing program of product improvement makes it necessary to submit new models to the agencies as they are developed. Consequently, all models may not bear the appropriate labels at all times. We reserve the right to change specifications and product design without notice. Such revisions do not entitle buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Information is not for design purposes. 259

Humidified Holding Cabinets JOB ITEM # QTY # MODEL NUMBER CS2H-5 CS2H-10 CS2H-5/5 CS2H-5 Improve holding capabilities with the Chef System Humidified Holding Cabinets! Designed for simple operation and exceptional holding performance in 5- or 10-pan models, the CS2H provides Piper reliability in a holding cabinet that keeps a wide range of menu items hot for extended holding times. With 5 levels of humidity, crisp food will stay crisp and moist food moist. The 90 F to 185º (32ºC to 85ºC) air temperature range allows precise food temperature control for holding and proofing. STANDARD FEATURES Precise temperature and humidity control is ideal for proofing and for holding. Prepare food in advance of peak serving periods. Five levels of humidity to keep crisp food crisp and moist food moist. DIMENSIONS CS2H-5: 26-7/8"W x 34"D x 34"H on 4" casters. CS2H-10: 26-7/8"W x 34"D x 51-1/2"H on 4" casters. Add 11/4" for pass-through models. FEATURES Temperature Range: 90 F to 185 F (32 C to 85 C) Relative Humidity Settings: 1 = 20%, 2 = 35%, 3 = 50%, 4 = 65%, 5 = 80% Water Capacity: 2.5 gallons ELECTRICAL 120 volts, 60 Hz, 2350 watts, 19.6 amps (uses NEMA 5-20P). (Not available in Canada.) 208 volts, 60 Hz, 2350 watts, 11.3 amps (uses NEMA 6-15P). 240 volts, 60 Hz, 2350 watts, 9.8 amps (uses NEMA 6-15P). WARRANTY One year parts and labor. Warranty is detailed on inside front cover of the price list. CS2H-10 SPEC K-4 260

Humidified Holding Cabinets MODEL # CS2-5 MODEL # CS2H-5/5 MODEL # CS2H-10 Shown with pass thru option Shown with pass thru option Shown with pass thru option SPECIFICATIONS Model Rack Style Shipping Weight CS2H-5 Adjustable Slides 240 lbs. CS2H-10 Adjustable Slides 320 lbs. CS2H-5/5 Adjustable Slides 480 lbs. 5-Pan Model has 5 slides on each side. Sheet Pans not included. 10-Pan Model has 10 slides on each side. Sheet Pans not included. Typical freight class: 85 CAPACITY No. of 2 1/2" (6 cm) Deep Pans No. of 1" (3 cm) Deep Pans CS2H-5 3 3/4" Centers 10 (2 per shelf) 5 2 1/2" Centers 7 (Extra slides required) CS2H-10 3 3/4" Centers 20 (2 per shelf) 10 2 1/2" Centers 14 (Extra slides required) Part Number Description CS2H-SSBack-5 Stainless Steel Back in lieu of powder coating (CS2H-5 only) CS2H-SSBack-10 Stainless Steel Back in lieu of powder coating (CS2H-10 only) CS2H-Heavycast 5" Heavy-Duty Casters (In lieu of standard Casters) CS2H-SSLeg 6" Stainless Steel Adjustable Legs (In lieu of standard Casters) CS2H-Stack Stacking hardware for multiple holding cabinets CS2H-Slide Additional slides 20A-Recep 20 Amp receptacle, 125V (Nema 5-20R) PT Passthru WATER QUALITY REQUIREMENTS Water supply in excess of 3.0 grains of hardness per gallon (GPG) must be treated and softened before being used. Water containing over 3.0 GPG will decrease the efficiency and reduce the operating life of the unit. Note: Product failure caused by liming or sediment buildup is not covered under warranty. CORD LOCATION Rear top center. Pass-through models: Rear top, left-hand side. PLUG CONFIGURATIONS NEMA 5-20P NEMA 6-15P K-4 SPEC LIMITED WARRANTY: PIPER PRODUCTS warrants to the original purchaser parts and labor for a period of twelve (12) months from the date of purchase. See manufacturer s complete warranty for details. It is our policy to build equipment which is design certified by companies that have been accredited at the Federal Level by the Occupational Safety and Health Agency (OSHA) and ANSI as a National Recognized Testing Laboratory. These companies include CSA International, Underwriters Laboratories, and the National Sanitation Foundation. However, a continuing program of product improvement makes it necessary to submit new models to the agencies as they are developed. Consequently, all models may not bear the appropriate labels at all times. We reserve the right to change specifications and product design without notice. Such revisions do not entitle buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Information is not for design purposes. 261