MADE IN ITALY THE EXPERT of stainless steel condensing heating systems ECO FRIENDLY wall-mounted boilers, water heaters and pool heaters floor standing boilers, water heaters and pool heaters AISI 6Ti (Titanium) stainless steel heat exchangers
wall-mounted up to 90,000 Btu/hr wall-mounted up to 200,000 Btu/hr THE NEW GENERATION OF HIGH EFFIC This water heating system is a stainless steel water tubes condensing appliance, with low pollution, fully modulating premixed burner. It is available in different powers from Btu/hr to,000,000 Btu/hr and in wall-mounted or floor standing version. The high efficiency heat exchanger allows the creation of compact and light appliances with the possibility of installing them in very small mechanical rooms. floor standing 99,000 Btu/hr Boiler versions can be connected to any type of heating installation such as radiators, radiant panels, fan-coils, etc..; water heater versions can be connected to any D.H.W. production system and pool heaters can be connected to any pool heating system. All our appliances are equipped with premixed burners, built in Fecralloy fibre, for a high efficiency combustion and low polluting emissions (CO<5 ppm and NOx<5
floor standing,000,000 Btu/hr floor standing 7 Btu/hr floor standing 500,000 Btu/hr ENCY CONDENSING HEATING SYSTEMS ppm), together with the special air/gas mixer Cosmomix and the pneumatic gas valve, at negative pressure, allows appliances to reach turndown ratio up to 20:, adapting it to all load variations requested by the system during different seasons and maintaining a high combustion and efficiency. Appliances are versatile respect to PVC, CPVC, stainless steel and polypropylene venting systems and thanks to the high head fan they can discharge up to ft long. They can also be connected to the combustion air duct to have sealed system respect to the ambient. Appliances are also equipped with: condensate siphon, flue gas pressure switch, water flowmeter and water pressure sensor.
PATENTED R.V.C. AISI 6Ti (TITANIUM) Exceptional performance: the new patented R.V.C. (Radial Variable Circulation) heat exchanger. The core of all appliances is the new generation of heat exchangers type R.V.C.. It is composed by series of stainless steel round tubes. In particular, the tube closest to the burner is built in AISI 6Ti (TITANIUM) stainless steel. These tubes are assembled and hydraulically connected without welding, maintaining unaltered the chemical and physical characteristics of the stainless steel, with maximum warranty against corrosion. Exceptional efficiency up to %. Heat exchanger with low pressure drops and a high resistance to the working pressure, up to 60 PSI ( bar). The external case is realized with an innovative composite material PPX 80, which gives it exceptional robustness, lightness and durability in time. Approvals: Premix burner advantages: Fecralloy fibre High efficiency combustion Low polluting emissions (CO<5 ppm and NOx<5 ppm) Cosmomix advantages: Turndown ratio up to 5: per heat exchanger Negative Pressure gas valve W.C. min. supply gas pressure
STAINLESS STEEL HEAT EXCHANGER A unique range of products (boilers, water heaters and pool heaters) with a uniformity of functions and, consequently, easy to instruct throughout the whole supply and service chain. Spare parts (fan, gas valve, control board, display board, spark generator, pressure sensor, flow sensor, temperature sensors, ignition electrode, detection electrode, Modbus board) are the same for all power range from 99 kbtu/hr up to 000 kbtu/hr for all, boiler, water heater and pool heater series. The after sales service can do maintenance on all appliances with a very limited number of spare parts. Display, control board and general features: Very intuitive control system Connection with external sensor for outdoor reset so as to increase rooms comfort and to maintain boiler temperature as low as possible to achieve the maximum seasonal efficiency Display back-lightening turns off after 5 minutes of inactivity Auto diagnostic of all components and functions, visualization of errors and lockouts, temperature sensors, ionisation current, fan rotation speed, room thermostat status Possibility of maximum and minimum domestic and heating power setting Forcing high or low fire to facilitate combustion analysis Anti-blocking pump system Indirect water heater management 0-0Vdc input for external thermo regulator Integrated MODBUS communication board to communicate with home building automation devices (model 99, 250 and 99 on demand) PC connection for diagnostic Can be connected in cascade up to appliances Exit for alarm connection Low gas pressure operation up to W.C. Zero clearances to combustible material Connectable to indirect water heater drived via NTC sensor (boiler only) Connectable to storage water heater drived via NTC sensor (water heater only) Ideal to be connected to a pressure controlled variable speed pump Freeze protection system System pump control, boiler pump control and DHW pump control DHW prioritization Integrated air filter (for models 99, 500, 750, 000 only) Integrated condensate neutralizer kit (for models 99, 500, 750, 000 only): volume of 26. dm (7 gal), content 25 kg (55 lb) of limestone On/off switch Readable on the control system: water flow sensor (you can see the real GPM are running inside each heat exchanger), supply temperature sensor, flue temperature sensor and tank temperature sensor Low water flow protection Water pressure sensor (display shows continuously the pressure inside the water system) Low water pressure protection Flue blocked pressure switch Adjustable leveling feet Condensate trap Back flue preventer (flapper) Vent damper (flapper)
MYdens 90MP, 0MP condensing wall-mounted combi boiler Cosmogas with MYdens 90MP, 0MP reaches a new achievement in the condensing boilers sector for the residential field. A new concept of boilers able to satisfy the new household needs, that feature tinier spaces, energy saving requests, comfort, ease of use, reliability and a light impact on the environment. Only 2 (05mm) depth contain the power of MYdens 90MP, 0MP, in a sophisticated and elegant design suitable for installation in any residential space. Its small size and lightness simplify the installation. Attention has also been paid to the accessibility of the final user with simple and intuitive commands, and ease of maintenance with boiler frontal access. Why choose MYdens: Extra saving and efficiency Modern, innovative and attractive design Condensation technology Fully modulating Efficiency up to % Comfort Silent Large DHW production Outdoor reset Easy installation and maintenance Reduced size and weight Very intuitive control system Construction quality 6Ti (Titanium) stainless steel R.V.C. heat exchanger Oversized stainless steel D.H.W. heat exchanger Turndown ratio up to 5: Ecology Reduced gas emissions in the atmosphere CO<5 ppm and NOx<5 ppm
MYdens 90MP, 0MP unit, important features: Heating for warm and comfortable spaces D.H.W. production: large, adjustable and continuous Saving with condensing technology Ecology with combustion control technology
MYdens 90MP, 0MP condensing wall-mounted combi boiler MYdens is available with powers Btu/hr, 90,000 Btu/hr. Cosmogas, with MYdens 90MP, 0MP, started a conceptual revolution that defines a new pattern where energy saving and respect for the environment were brought to a new level. It is an example the absence of weldings, which reduces the use of primary energy in the production process, in line with the canons of eco-design which provide the recuperation of individual homogeneous materials. 2,6-20mm Wall-mounted boilers can be in a combi version. For this, they install a domestic heat exchanger with big dimensions for a high D.H.W. production. Immediate availability of hot water: wellness and comfort. D.H.W. is produced through an oversized (L=2,6-20mm) stainless steel plate heat exchanger, which allows high availability of D.H.W. and fast service. Bath and showers thanks to the hot water produced by MYdens give wellness, relax and energy when workdays are long and stressful. D.H.W. PRODUCTION T 75 F 2. gpm 90MP.5 gpm 0MP
MYdens 90MP, 0MP DIMENSIONS AND CONNECTIONS - HEATING SUPPLY 2 - D.H.W. OUTLET - GAS INLET 5 - COLD WATER INLET 6 - HEATING RETURN 7 - FLUE GASES DISCHARGE/AIR INTAKE 8 - SUPPORT CONNECTIONS 9 - CONDENSATE DISCHARGE Ø/ OPERATING SCHEME - Air INLET 2 - Flue EXHAUST - Automatic air VENT - Sealing chamber 5 - Expansion TANk 6 - High limit SUPPLY temp. SWITCH 7 - Supply TEMPERATURE sensor 8 - Purging cock 9 - Flue GAS TEMPERATURE sensor 0 - High limit flue gas temp. SWITCH - Air INLET WATER TANk 2 - Premix burner - Ignition ELECTRODES - ignitor 5 - Return TEMPERATURE sensor 6 - Modulating PWM FAN 7 - Back flue preventer 8 - Plate HEAT EXCHANGER 9 - WATER pressure sensor 20 - Gas VALVE 2 - Circulator pump 22 - Detection electrode 2 - R.V.C. STAINLESS STEEL HEAT EXCHANGER 25 - Heating SUPPLY 26 - Heating RETURN 27 - Gas SUPPLY 0 - Condensing drain - Condensate Siphon 2 - HOT WATER SENSOR - By-pass HEATING SUPPLY VALVE 5 - Three-way VALVE 7 - SAFETY RELIEF VALVE 8 - Domestic WATER strainer 0 - Return purging cock - COLD WATER INLET 2 - D.H.W. OUTlet - feeding cock 7 - D.H.W. Flow meter
MYdens 50M, 90M, 0M 99M condensing wall-mounted boiler With MYdens 50M to 99M Cosmogas reaches a new achievement in the condensing boilers sector for the independent residential sector. A new concept of boilers able to satisfy the new household needs, that feature tinier spaces, energy saving requests, comfort, ease of use, reliability and a light impact on the environment. Only 9 (8mm) depth contain the power of this series of appliances, in a sophisticated and elegant design suitable for installation in any residential space. The heart of these appliances lies in the R.V.C. heat exchanger. Therefore, the boiler is able to adapt to all changing load situations required by the system during the heating cycle, keeping high performances and high combustion efficiency. Cosmogas with MYdens started a conceptual revolution that defines a new pattern where energy saving and the respect for the environment were brought to a new level. Why choose MYdens M: Extra saving and efficiency Modern, innovative and attractive design Condensation technology Fully modulating Efficiency up to % Comfort Silent Outdoor reset Easy installation and maintenance Reduced size and weight Construction quality 6Ti (Titanium) stainless steel R.V.C. heat exchanger Turndown ratio up to 5: Ecology Reduced gas emissions in the atmosphere CO<5 ppm and NOx<5 ppm
MYdens 50M, 90M, 0M 99M DIMENSIONS AND CONNECTIONS MYDENS 50M - 90M - 0M DIMENSIONS AND CONNECTIONS MYDENS 99M 9.52" (22mm) 7.95" (202mm) - HEATING SUPPLY 2 - GAS INLET - HEATING RETURN - FLUE GASES DISCHARGE/ AIR INTAKE 5 - SUPPORT CONNECTIONS - HEATING SUPPLY 2 - GAS INLET - HEATING RETURN - FLUE GASES DISCHARGE/ AIR INTAKE 5 - SUPPORT CONNECTIONS OPERATING SCHEME - Air INLET 2 - Flue EXHAUST - Automatic air VENT - Sealing chamber 6 - High limit SUPPLY temp. SWITCH 7 - Supply TEMPERATURE sensor 9 - Flue GAS TEMPERATURE sensor 0 - High limit flue gas temp. SWITCH 2 - Premix burner - Ignition ELECTRODES - ignitor 5 - Return TEMPERATURE sensor 6 - Modulating PWM FAN 7 - Back flue preventer 9 - WATER pressure sensor 20 - Gas VALVE 2 - Circulator pump 22 - Detection electrode 2 - R.V.C. STAINLESS STEEL HEAT EXCHANGER 25 - Heating SUPPLY 26 - Heating RETURN 27 - Gas INLET 0 - Condensing drain - Condensate Siphon 7 - SAFETY RELIEF VALVE 7 - Flow meter
MYdens 99T, 250T, 99T, 500T condensing floor standing boiler MYdens 99T, 250T, 99T and 500T are condensing boilers that can be installed directly on the floor thanks to their power, reduced size and lightness, freeing space inside mechanical rooms. MYdens 99T and 250T are equipped with one R.V.C. heat exchanger made of AISI 6Ti (titanium) stainless steel. MYdens 99T and 500T are equipped with 2 R.V.C. heat exchangers made of AISI 6Ti (titanium) stainless steel that work in cascade mode with unit power at 99,500 btu/hr (MYdens 99T) and 2 btu/hr (MYdens 500T). The turndown ratio is up to 0:. Every heat exchanger is equipped with all control and safety devices. The boiler, being a multi-heat exchanger, has more reliability in case of malfunction occurring to one module, while the others work without any problem. Furthermore, multiple exchangers have power control boards that communicate among them and handle the power output of every module in a uniform and coordinated way in order to guarantee the maximum efficiency, turnover and a uniform wearing out. MYdens 99T - 500T Why choose MYdens T: MYdens 99T - 250T Extra saving and efficiency Modern, innovative and attractive design Condensation technology Fully modulating Efficiency up to % Comfort Silent Outdoor reset Easy installation and maintenance Reduced size and weight Construction quality 6Ti (Titanium) stainless steel R.V.C. heat exchanger Turndown ratio up to 0: Ecology Reduced gas emissions in the atmosphere CO<5 ppm and NOx<5 ppm
MYdens 99T, 250T, 99T, 500T DIMENSIONS AND CONNECTIONS FRONT VIEW SIDE VIEW REAR VIEW - HEATING SUPPLY 2 - HEATING RETURN - AIR INLET - FLUE GASES DISCHARGE 5 - GAS INLET 6 - CONDENSING DRAIN OPERATING SCHEME - Air INLET 2 - Flue EXHAUST - Sealing chamber 6 - High limit SUPPLY temp. SWITCH 7 - Supply TEMPERATURE sensor 8 - WATER PRESSURE SENSOR 9 - Flue GAS TEMPERATURE sensor 0 - High limit flue gas temp. SWITCH 2 - Premix burner - Ignition ELECTRODES - ignitor 5 - Return TEMPERATURE sensor 6 - Modulating PWM FAN 7 - Back flue preventer 20 - Gas VALVE 22 - Detection electrode 2 - R.V.C. STAINLESS STEEL HEAT EXCHANGER 25 - Heating SUPPLY 26 - Heating RETURN 27 - Gas INLET 28 - Blocked flue pressure switch 29 - Condensing blocked drain switch 0 - Condensing drain - Condensate Siphon 2-2 nd R.V.C. (MODELS 99T - 500T) - System TEMPERATURE sensor 6 - Condensate neutralizer 7 - Flow meter 8 - Check VALVE 50 - DRAIN VALVE
MYdens 750T, 000T condensing floor standing boiler MYdens 750T and MYdens 000T are condensing boilers that can be installed directly on the floor thanks to their power, reduced size and lightness, freeing space inside mechanical rooms. MYdens 750T and MYdens 000T are equipped with or R.V.C. heat exchangers made of AISI 6Ti (titanium) stainless steel that work in cascade mode with unit power at 2 Btu/hr. The turndown ratio is up to 20:. Every heat exchanger is equipped with all control and safety devices. The boiler, being a multi-heat exchanger, has more reliability in case of malfunction occurring to one module, while the others work without any problem. Furthermore, multiple exchangers have power control boards that communicate among them and handle the power output of every module in a uniform and coordinated way in order to guarantee the maximum efficiency, turnover and a uniform wearing out. MYdens 000T Why choose MYdens 750T, 000T: Extra saving and efficiency Modern, innovative and attractive design Condensation technology Fully modulating Efficiency up to % Comfort Silent Outdoor reset Easy installation and maintenance Reduced size and weight Construction quality 6Ti (Titanium) stainless steel R.V.C. heat exchanger Turndown ratio up to 20: Ecology Reduced gas emissions in the atmosphere CO<5 ppm and NOx<5 ppm MYdens 750T
MYdens 750T, 000T DIMENSIONS AND CONNECTIONS OPERATING SCHEME FRONT VIEW REAR VIEW - HEATING SUPPLY 2 - HEATING RETURN - AIR INLET SIDE VIEW - FLUE GASES DISCHARGE 5 - GAS INLET 6 - CONDENSING DRAIN - Air INLET 2 - Flue EXHAUST - Automatic air VENT - Sealing chamber 6 - HIGH LIMIT SUPPLY TEMP. switch 7 - Supply temp. SENSOR 8 - WATER pressure sensor 9 - Flue GAS temp. sensor 0 - High limit flue gas temp. switch 2 - Premix burner - Ignition ELECTRODES - ignitor 5 - Return temp. sensor 6 - Modulating PWM FAN 7 - Back flue preventer 20 - Gas VALVE 22 - Detection electrode 2 - Supply and return MANIFOLDS 2 - R.V.C. STAINLESS STEEL HEAT EXCHANGER 25 - Heating SUPPLY 26 - Heating RETURN 27 - Gas INLET 28 - BLOCkED FLUE PRESSURE switch 29 - CONDENSING BLOCkED DRAIN SWITCH 0 - Condensing drain 2 - th R.V.C. (MODELS 000T) - Condensate Siphon - System temp. sensor 6 - Condensate neutralizer 7 - Flow meter 8 - Check VALVE 50 - DRAIN VALVE
MYdens Cascade Sequence condensing floor standing boiler MYdens 000T can be used and connected in cascade to achieve a maximum power of,000,000 Btu/hr. Thanks to the cascade connection up to MYdens 000T the turndown ratio is very high 80: and you will get exceptional results in systems that need high powers to start and small powers to operate. It is also recommended in all the installations where it is necessary to ensure a continuity of operation. An example of connection Why choose MYdens: Extra saving and efficiency Modern, innovative and attractive design Condensation technology Fully modulating Efficiency up to % Comfort Silent Outdoor reset Easy installation and maintenance Reduced size and weight Construction quality 6Ti (Titanium) stainless steel R.V.C. heat exchanger Turndown ratio up to 80: Ecology Reduced gas emissions in the atmosphere CO<5 ppm and NOx<5 ppm
MYdens Cascade Sequence CONTROLLER Cascade sequences up to -appliances using 2-wire daisy-chain connection. One boiler functions as the master and the other as slaves, and modulates to capacity. Appliances can be installed in battery with a minimum distance of. For this purpose, the whole design has been conceived to gain access from the front and from the back for each type of maintenance. POSSIBLE ARRANGEMENTS 2.62" (600mm) 5.25" (02mm).0" (02mm) 2.62" (600mm) 78.89" (200mm) 7.5" (85mm) 7.5" (85mm) 7.5" (85mm) from 50 to 2,000 kbtu/hr from 50 to,000 kbtu/hr 06.5" (2706mm) from 50 to,000 kbtu/hr
AGUAdens 90M, 0M, 99M condensing wall-mounted water heater With AGUAdens Cosmogas reaches a new achievement in the condensing water heaters sector for the independent residential sector. A new concept of water heaters able to satisfy the new household needs, that feature tinier spaces, energy saving requests, comfort, ease of use, reliability and a light impact on the environment. Only 2 (05mm) depth contain the power of AGUAdens, in a sophisticated and elegant design suitable for installation in any residential space. Cosmogas with AGUAdens, started a conceptual revolution that defines a new pattern where energy saving and the respect for the environment were brought to a new level. Why choose AGUAdens M: Extra saving and efficiency Modern, innovative and attractive design Condensation technology Fully modulating Efficiency up to % Comfort Silent Instantaneous DHW production Easy installation and maintenance Reduced size and weight Construction quality 6Ti (Titanium) stainless steel R.V.C. heat exchanger Turndown ratio up to 5: Ecology Reduced gas emissions in the atmosphere CO<5 ppm and NOx<5 ppm
AGUAdens 90M, 0M, 99M DIMENSIONS AND CONNECTIONS - RECYCLING LOOP CONNECTION 2 - DOMESTIC HOT WATER SUPPLY - GAS INLET - COLD WATER 5 - FLUE GASES DISCHARGE/AIR INTAKE 6 - SUPPORT CONNECTIONS 7 - CONDENSING DRAIN Ø/ A - 2 (05mm) (90M and 0M models) 9.05 (8mm) (99M models) B -.72 (mm) (99M models) C -.92 (25mm) (90M and 0M models).96 (0mm) (99M models) OPERATING SCHEME - WATER HEATER 2 - AIR INLET - Flue EXHAUST - High limit Flue GAS TEMP. SWITCH 5 - FLUE GAS TEMPERATURE SENSOR 6 - Sealing chamber 7 - WATER BAG CONVEIOR 8 - HOT WATER TEMPERATURE SENSOR 9 - High limit HOT WATER SWITCH 0 - Premix burner - R.V.C. STAINLESS STEEL HEAT EXCHANGER 2 - Modulating FAN - cold WATER TEMPERATURE sensor - Condensate Siphon 5 - AIR/GAS MIXING DEVICE 6 - Gas VALVE 7 - SAFETY RELIEF VALVE 8 - BALL VALVE 9 - RECIRCULATION PUMP 20 - CHECK VALVE 2 - FLOW METER 22 - RECYCLING LOOP CONNECTION 2 - CAP 2 - HOT WATER TEMPERATURE SENSOR 25 - SHUT OFF GAS VALVE 26 - GAS SUPPLY 27 - COLD WATER INLET 28 - CONDENSING DRAIN
AGUAdens 99T, 250T, 99T, 500T condensing floor standing water heater AGUAdens 99T, 250T, 99T and 500T are condensing water heaters that can be installed directly on the floor thanks to their power, reduced size and lightness, freeing space inside mechanical rooms. AGUAdens 99T and 250T are equipped with one R.V.C. heat exchanger made of AISI 6Ti (titanium) stainless steel. AGUAdens 99T and 500T are equipped with 2 R.V.C. heat exchangers made of AISI 6Ti (titanium) stainless steel that work in cascade mode with unit power at 99,500 btu/hr (AGUAdens 99T) and 2 btu/hr (AGUAdens 500T). The turndown ratio is up to 0:. Every heat exchanger is equipped with all control and safety devices. The water heater, being a multiheat exchanger, has more reliability in case of malfunction occurring to one module, while the others work without any problem. Furthermore, multiple exchangers have power control boards that communicate among them and handle the power output of every module in a uniform and coordinated way in order to guarantee the maximum efficiency, turnover and a uniform wearing out. AGUAdens 99T - 500T AGUADENS CONNECTED TO WATER STORAGE TANK - AGUADENS 2 - WATER STORAGE TANK 2 - DOMESTIC HOT WATER SUPPLY - COLD WATER INLET Why choose AGUAdens T: Extra saving and efficiency Modern, innovative and attractive design Condensation technology Fully modulating Efficiency up to % Comfort Silent Instantaneous DHW production Easy installation and maintenance Reduced size and weight Construction quality 6Ti (Titanium) stainless steel R.V.C. heat exchanger Turndown ratio up to 0: Ecology Reduced gas emissions in the atmosphere CO<5 ppm and NOx<5 ppm
AGUAdens 99T, 250T, 99T, 500T DIMENSIONS AND CONNECTIONS FRONT VIEW SIDE VIEW REAR VIEW - DOMESTIC HOT WATER SUPPLY 2 - COLD WATER INLET - AIR INLET - FLUE GASES DISCHARGE 5 - GAS INLET 6 - CONDENSING DRAIN OPERATING SCHEME - Air INLET 2 - Flue EXHAUST - Sealing chamber 6 - High limit HOT WATER temp. switch 7 - SUPPLY TEMPERATURE sensor 9 - Flue GAS TEMPERATURE sensor 0 - High limit flue gas temp. FUSE 2 - Premix burner - Ignition ELECTRODES - ignitor 6 - Modulating PWM FAN 7 - Back flue preventer 9 - WATER pressure sensor 20 - Gas VALVE 22 - Detection electrode 2 - R.V.C. STAINLESS STEEL HEAT EXCHANGER 25 - Hot WATER outlet 26 - Cold WATER INLET 27 - Gas INLET 28 - Blocked flue pressure switch 29 - Condensing blocked drain switch 0 - Condensing drain - Condensate Siphon 2-2 nd R.V.C. (MODELS 99T - 500T) - System TEMPERATURE sensor 6 - Condensate neutralizer 7 - WATER Flow meter 8 - Check VALVE 9 - cold WATER TEMPERATURE sensor 50 - DRAIN VALVE
AGUAdens 750T, 000T condensing floor standing water heater AGUAdens 750T and AGUAdens 000T are condensing water heaters that can be installed directly on the floor thanks to their power, reduced size and lightness, freeing space inside mechanical rooms. AGUAdens 750T and AGUAdens 000T are equipped with or R.V.C. heat exchangers made of AISI 6Ti (titanium) stainless steel that work in cascade mode with unit power at 2 Btu/hr. The turndown ratio is up to 20:. Every heat exchanger is equipped with all control and safety devices. The water heater, being a multiheat exchanger, has more reliability in case of malfunction occurring to one module, while the others work without any problem. Furthermore, multiple exchangers have power control boards that communicate among them and handle the power output of every module in a uniform and coordinated way in order to guarantee the maximum efficiency, turnover and a uniform wearing out. AGUAdens 000T AGUADENS CONNECTED TO WATER STORAGE TANK - AGUADENS 2 - WATER STORAGE TANK 2 - DOMESTIC HOT WATER SUPPLY - COLD WATER INLET Why choose AGUAdens T: Extra saving and efficiency Modern, innovative and attractive design Condensation technology Fully modulating Efficiency up to % Comfort Silent Instantaneous DHW production Easy installation and maintenance Reduced size and weight Construction quality 6Ti (Titanium) stainless steel R.V.C. heat exchanger Turndown ratio up to 20: Ecology Reduced gas emissions in the atmosphere CO<5 ppm and NOx<5 ppm
AGUAdens 750T, 000T DIMENSIONS AND CONNECTIONS OPERATING SCHEME FRONT VIEW REAR VIEW - DOMESTIC HOT WATER SUPPLY 2 - COLD WATER INLET - AIR INLET SIDE VIEW - FLUE GASES DISCHARGE 5 - GAS INLET 6 - CONDENSING DRAIN - Air INLET 2 - Flue EXHAUST - Sealing chamber 6 - HIGH LIMIT HOT WATER temp. SWITCH 7 - Supply temp. SENSOR 9 - Flue GAS temp. sensor 0 - High limit flue gas temp. FUSE 2 - Premix burner - Ignition ELECTRODES - ignitor 6 - Modulating PWM FAN 7 - Back flue preventer 9 - WATER pressure sensor 20 - Gas VALVE 22 - Detection electrode 2 - COLD AND HOT WATER MANIFOLDS 2 - R.V.C. STAINLESS STEEL HEAT EXCHANGER 25 - Hot WATER outlet 26 - Cold WATER INLET 27 - Gas INLET 28 - BLOCkED FLUE PRESSURE switch 29 - CONDENSING BLOCkED DRAIN SWITCH 0 - Condensing drain - Condensate Siphon 2 - th R.V.C. (MODELS 000T) - System temp. sensor 6 - Condensate neutralizer 7 - Flow meter 8 - Check VALVE 9 - COLD WATER temp. sensor 50 - DRAIN VALVE
BOILERS MYdens TECHNICAL DATA Category of discharge chimney Maximum heat input Btu/hr Minimum heat input Btu/hr Turndown ratio Number of burners Efficiency at maximum heat input (60 F/0 F) % Efficiency at minimum heat input (22 F/86 F) % AFUE rate % Gas flow rate (Natural Gas) ft /hr Gas flow rate (LP Gas) ft /hr Min/Max gas pressure (Natural and LP Gas) In. W.C. Min/Max heating temperature F Min/Max heating pressure PSI Minimum water flow Supply Voltage/Frequence Absorbed electric power Air intake/flue gas pipes diameter Maximum length venting system Balanced CO (Carbon monoxide) with natural gas Balanced NOx contents (0% O 2 with natural gas) Weight (empty of water) Instantaneous DHW delivery (75 F rise) Gas connection Supply and return connections DHW connections (cold water - hot water) GPM Vac/Hz W inch ft ppm ppm lb GPM inch inch inch 90MP 90,000 22,500 : 90 6 68/89 /60 90 <00 00 2. / / /2 - /2 0MP 0,000 2,500 : 0 52 68/89 /60 90 00.5 / /2 - /2 50M 2,500 : 50 20 68/89 /60 70 <90 90 / / 90M 90,000 22,500 : 90 6 68/89 /60 90 <00 00 / / /2 - /2 WATER HEATERS AGUAdens TECHNICAL DATA Category of discharge chimney Maximum heat input Btu/hr Minimum heat input Btu/hr Turndown ratio Number of burners Efficiency at maximum heat input (60 F/0 F) % Efficiency at minimum heat input (22 F/86 F) % Recovery rating Gal/hr Gas flow rate (Natural Gas) ft /hr Gas flow rate (LP Gas) ft /hr Min/Max gas pressure (Natural and LP Gas) In. W.C. Min/Max water temperature F Min/Max water pressure PSI Minimum water flow Supply Voltage/Frequence Absorbed electric power Air intake/flue gas pipes diameter Maximum length venting system Balanced CO (Carbon monoxide) with natural gas Balanced NOx contents (0% O 2 with natural gas) Weight (empty of water) Instantaneous DHW delivery (75 F rise) Gas connection DHW connections (cold water - hot water) GPM Vac/Hz W inch ft ppm ppm lb GPM inch inch 90M 90,000 22,500 : 0 90 6 0/0 0.5 /60 90 <00 00 2. / /2 - /2 0M 99M 99T 0,000 2,500 : 8 0 52 0/0 0.5 /60 90 0.5 / /2 - /2 99,500 : 227 99.5 80 0/0 /60 0 6 5.7 / 99,500 : 227 99.5 80 0/0 /60 0 6 /2
AGUAdens 250T 2 5: 285 250 00 0/0 /60 50 67 /2 99T 99,000 8: 2 55 99 60 0/0 /60 220 2 /2 500T 750T 000T 500,000 0: 2 570 500 200 0/0 /60 00 22 /2 7 5: 885 750 00 0/0 /60 0 6 97 /2 /2 999,000 20:,8 999 00 0/0 /60 59 6 85 /2 /2 MYdens 0M 99M 99T 0,000 2,500 : 0 52 68/89 /60 90 00 / /2 - /2 99,500 : 99.5 80 68/89 /60 0 0 / /2 99,500 : 99.5 80 68/89 /60 0 7 /2 250T 2 5: 250 00 68/89 /60 50 76 /2 99T 99,000 8: 2 99 60 68/89 /60 220 22 /2 500T 750T 000T 500,000 0: 2 500 200 68/89 /60 00 25 /2 7 5: 750 00 68/89 /60 0 6 62 /2 2 /2 999,000 20: 999 00 68/89 /60 59 6 55 /2 2 /2
NOTES
NOTES
620287 - Ottobre 20 - WITH THE AIM OF CONSTANTLY DEVELOPING AND IMPROVING IT S PRODUCTS, COSMOGAS RESERVES THE RIGHT TO MODIFY, UPDATE AND IMPROVE, AT ANY TIME, THIS FOLDER. Massimiliano Pieraccini COSMOGAS International Certifications EU USA USA Canada AUTHORIZED DEALER COSMOGAS srl Via L. da Vinci, 6 70 MELDOLA (FC) ITALY Tel. +9 05.9.8.70 Fax +9 05.9.8.92 www.cosmogas.com info@cosmogas.com