DESCRIPTION is a versatile LED surface or wall mount luminaire which can be used in a broad range of commercial and industrial applications. This series provides customers with a high quality luminaire utilizing the latest LED, solid state lighting and electronic driver technology for optimal performance and maximized energy efficiency. Offered with three different lens distributions and three different lens options which provides uniform light distribution that is an ideal choice for general purpose lighting where customers want to move away from traditional fluorescent solutions. Catalog # Project Comments Prepared by Metalux Type Date SPECIFICATION FEATURES Construction Housing consists of die formed cold rolled steel with decorative white opaque injection molded end plates. Reflector/channel wireway cover secured by fasteners for easy wireway access. Channel back has numerous KO s for easy installation. Controls The is Powered by Fifth Light, with a standard -1V continuous dimming driver that works with any -1V control/ dimmer. Combine with energy saving products like occupancy sensors, daylighting controls and lighting relay panels to maximize energy savings. In addition, the can include a factoryinstalled integrated sensor system for occupancy and daylight dimming control and manual control from an optional handheld remote. Or, specify the Digital Addressable Lighting Interface (DALI) drivers (consult factory for 1% dimming), for use with Fifth Light controls. See ordering information for details on all three options. Emergency Battery Pack Option Optional 12v-277v integral emergency battery pack is available in 7-watts or 14-watts to meet critical life-safety lighting requirements. The 9-minute batteries provide constant power to the LED system, ensuring codecompliance. A test switch/indicator button can be tested safely from the ground using a laser pointer, while the patented EZ Key prevents accidental discharge of the battery during construction. See ordering information for details. Finish Highly reflective post painted finish (PAF) standard offering customers the optimal finish and handling. Additionally, each housing is treated in a multistage iron phosphate pretreatment, insuring maximum bonding and rust inhibitor. Shielding Specially designed LED lens blends and linear optics allows us to offer three different lens versions - LC (clear), LN (Semi-Frost with narrow distribution) and LW (full frost with wide distribution). This lenses provide different lighting distribution allowing customers to choice between smooth even illumination. Lens is securely held in place by removable injection molded white end caps that can be easily removed for installation and maintenance. Installation Fixture may be surface (wall or ceiling) and suspended mounted. See accessories below for ordering information. Compliance Modules are UL recognized components and indoor luminaires are culus listed for up to 4ºC ambient environments, RoHS compliant, and LED modules comply with IESNA LM-79 and LM-8 standards. DesignLights Consortium Qualified and classified for DLC Standard, refer to www.designlights.org for details. LED Surface and Wall LED Electrical Long-Life LED system coupled with electrical driver to deliver optimal performance. LED s available in 3K, 4K or K with a typical CRI 8. Projected life is 6, hours at 7% lumen output. Electronic drivers are available for 12-277V applications. A -1V dimming driver is standard. [12mm] 4-1/2" [11m] MOUNTING DATA [12mm] 2' 21-3/16" [38mm] Lensed 28" [711mm] CERTIFICATION DATA culus - 198 Damp Location Listed LM79/LM8 Compliant ROHS Compliant DesignLights Consortium Qualified NOM Compliant 4' 4-3/16" [1148mm] Lensed [12mm] 2" [132mm] Safe and convenient means of disconnecting power 21-9-29 14:27:1
WATTAGE Lens Type Lumen Type Length Catalog Logic Nominal Lumens Wattage Full Frost (LW) Standard 2 ft. 2-LD1-8SL-LW-UNV-L8XX-CD1-SVPD2-U 8 1.1 1 Full Frost (LW) Standard 2 ft. 2-LD4-16SL-LW-UNV-L8XX-CD1-SVPD2-U 16 18.9 99. Full Frost (LW) Standard 2 ft. 2-LD4-2SL-LW-UNV-L8XX-CD1-SVPD2-U 2 23. 92 Full Frost (LW) High 2 ft. 2-LD4-24HL-LW-UNV-L8XX-CD1-SVPD2-U 24 24.9 94. Full Frost (LW) High 2 ft. 2-LD4-28HL-LW-UNV-L8XX-CD1-SVPD2-U 28 29.1 89. Full Frost (LW) Standard 4 ft. 4-LD4-16SL-LW-UNV-L8XX-CD1-SVPD2-U 1 12.8 116.7 Full Frost (LW) Standard 4 ft. 4-LD4-2SL-LW-UNV-L8XX-CD1-SVPD2-U 2 17.6 113.6 Full Frost (LW) Standard 4 ft. 4-LD4-28SL-LW-UNV-L8XX-CD1-SVPD2-U 28 2.6 19.6 Full Frost (LW) Standard 4 ft. 4-LD4-32SL-LW-UNV-L8XX-CD1-SVPD2-U 32 3 11.7 Full Frost (LW) Standard 4 ft. 4-LD4-36SL-LW-UNV-L8XX-CD1-SVPD2-U 36 3.2 12.1 Full Frost (LW) Standard 4 ft. 4-LD4-4SL-LW-UNV-L8XX-CD1-SVPD2-U 4 4.4 99.1 Full Frost (LW) High 4 ft. 4-LD4-44HL-LW-UNV-L8XX-CD1-SVPD2-U 44 39.2 112.2 Full Frost (LW) High 4 ft. 4-LD4-48HL-LW-UNV-L8XX-CD1-SVPD2-U 48 43.3 11.9 Full Frost (LW) High 4 ft. 4-LD4-2HL-LW-UNV-L8XX-CD2-SVPD2-U 2 46.8 111. Full Frost (LW) High 4 ft. 4-LD4-6HL-LW-UNV-L8XX-CD2-SVPD2-U 6 1.1 19.6 Full Frost (LW) High 4 ft. 4-LD4-6HL-LW-UNV-L8XX-CD2-SVPD2-U 6. 18.1 Full Frost (LW) High 4 ft. 4-LD4-64HL-LW-UNV-L8XX-CD2-SVPD2-U 64 6 16.7 Full Frost (LW) High 4 ft. 4-LD4-7HL-LW-UNV-L8XX-CD2-SVPD2-U 7 69 11.4 lm/w Peachtree City, GA 3269 P: 77-486-48 21-9-29 14:27:1
PHOTOMETRICS 4 9 13 1 3 4-LD4-4SL- LW-UNV-L83-CD1 Electronic Driver Linear LED 3K Spacing criterion: (II) 1.2 x mounting height, ( ) 1.2 x mounting height Lumens: 487 Input Watts: 42.W Efficacy: 96.2 lm/w Test Report: 4-LD4-4SL- LW-UNV-L83-CD1. IES Coefficients of Utilization Effective floor cavity reflectance 2% Candlepower Angle Along II 4 Across 1 1 2 2 3 3 4 4 6 6 7 7 8 8 9 1194 1194 1194 123 1188 1173 1184 119 1142 113 1123 111 111 18 174 18 132 131 996 978 983 926 918 933 849 8 878 766 786 816 678 713 74 88 639 69 49 64 626 4 491 63 32 419 3 27 32 44 12 291 39 236 337 4 188 28 rc 8% 7% % 3% 1% % rw 7 3 1 7 3 1 3 1 3 1 3 1 RCR 1 2 3 4 6 7 8 9 1 9 7 6 4 117 117 117 117 113 113 113 113 16 16 16 1 1 1 94 94 94 91 1 99 94 9 11 96 91 87 9 86 83 8 82 79 8 77 7 72 9 8 78 71 91 83 76 7 78 72 67 73 68 64 69 6 61 9 86 74 66 9 82 72 64 8 68 61 64 8 3 6 6 1 49 78 66 6 49 7 64 49 6 3 47 7 4 4 48 44 41 72 8 49 42 69 7 48 42 4 46 4 1 44 39 48 42 38 3 66 3 43 37 64 1 42 36 48 41 3 46 39 34 44 38 33 31 61 48 39 32 9 46 38 32 44 36 31 42 3 3 4 34 29 27 7 43 3 29 42 34 28 4 33 28 38 32 27 36 31 26 24 3 4 31 26 1 39 31 2 37 3 2 3 29 24 34 28 24 22 37 29 23 48 36 28 23 34 27 22 33 26 22 31 26 21 2 Zonal Lumen Summary Zone Lumens % Fixture -3 9 22.1-4 148 36.2-6 266 6. -9 3738 91. -18 487 1. ORDERING INFORMATION SAMPLE NUMBER: 4-LD4-4SL-LW-UNV-L84-CD1-SVPD2-U Length 2=2 ft. Length 4=4 ft. Length Series (13) =LED Surface and Wall LED Type LD4=LED 4. LED Lumens Output (2) 8SL=8 (3) 16SL=16 (3) 2SL=2 24HL=24 (3) 28HL=28 (3) 28SL=28 (4) 32SL=32 36SL=36 4SL=4 44HL=44 48HL=48 2HL=2 (12) 6HL=6 (12) 6HL=6 (12) 64HL=64 (12) 7HL=7 (12) Optic LC=Clear Lens LN=Semi-Frost Lens - Narrow LW=Full Frost Lens - Wide Voltage 347V=347 Volt (11) 48V=48 Volt (11) UNV=Universal Voltage 12-277 (1) UNC=Universal (4), (11) Voltage347/48 Options Occupancy Sensor SVPD1=Integrated occupancy and daylight dimming sensor, Driver Type CD=-1V Dimming Driver HDC=-1V Dimming Driver (1% - 1% Dimming) (11) LTD=Fifth Light (DALI) Driver Number of Drivers 1=1 Driver 2=2 Drivers ACCESSORIES (6), (8), (1), (1) sq. ft. coverage SVPD2=Integrated occupancy and daylight dimming sensor, (8), (14), (1) 9 sq. ft. coverage SVPD3=Integrated occupancy and daylight dimming sensor, (7), (1) 12 sq. ft. coverage (4), (9) Emergency EL7W=7-watt, 12V-277V emergency battery pack installed () EL14W=14-watt 12V-277V emergency battery pack installed () CCT L83=3K L84=4K L8=K Packaging U=Unit Pack CD=-1V Dimming Driver (1% - 1% Dimming) HCD=-1V Dimming Driver (1% - 1% Dimming) (13) (Order Separately) SCF=Fixed Stem Set (Specify Length) SCS=Swivel Stem Set (Specify Length) SCA=Adjustable 48" Stem Set A1B/Spacer-U=Spacer 1-1/2" to 2-1/2" from ceiling (Use 2 Per Fixture) NOTES: (1) Not available when specifying emergencies, voltage must be specific. (2) Nominal lumen output. (3) 2 ft. model. (4) Only available in 4 ft. models. () With integral test switch/indicator/laser test. For approximate delivered lumens multiply the lumens per watt of the desired fixture by the wattage of the emergency battery pack (1 lm/w x 7=7 lumens). IES-format photometry for luminaire under emergency operation available. (6) For mounting heights up to 8 ft. (7) For mounting heights up to 3 ft. (8) For mounting heights up to 12 ft. (9) Integral EL battery pack is rated for 3 C. (1) Product configuration meet ADA. (11) Consult factory. (12) Currently not DLC listed, consult factory. (13) DesignLights Consortium Qualified and classified for DLC Standard (some models are not DLC qualified). Refer to www.designlights.org for details. (14) For wall mount applications. (1) For use with CD driver only. Specifications & Consult your Representative for availability and ordering information. SHIPPING DATA Catalog No. Wt. 2-LD4 4-LD4 6 lbs. 12 lbs. Peachtree City, GA 3269 P: 77-486-48 21-9-29 14:27:1
INTEGRATED SENSOR Description This innovative luminaire-integrated sensor control system is optimized for code-compliant occupancy detection and daylight harvesting all from within the foot print of Metalux s award-winning recessed ambient luminaires. No New Wires An in-place fixture retrofit is all that s needed to meet most energy codes in commercial spaces. The sensor system is factory wired to the luminaire, switching on or off based on occupancy, and dimming the light when enough daylight is available. Sophisticated lighting control without commissioning The luminaire-integrated sensor system offers out-of-the-box operation using thoughtful default settings. Flexibility and Individual Control When the application demands more, the sensor system has the option to make changes using a remote control. The remote allows changes from the default settings for occupancy, target light level, preset lighting levels, and more. Cost-effective, Stand-alone Operation With a single product to mount and a single electrical connection to make, the Metalux luminaire with an integrated sensor system saves money on the total installed cost when occupancy or daylight harvesting controls are needed. The integrated sensor system works stand-alone, without the need for additional switches and dimmers. When manual-on, manual dimming or other code-required control schemes are needed, please see the comprehensive offering of Greengate and Fifth Light solutions from Cooper Controls at www.coopercontrol.com. Metalux Integrated Sensor Sequence of Operation The Metalux luminaires are available with an optional integrated sensor capable of occupancy sensing and dimming daylight harvesting. The sensor is preinstalled and factory wired, simplifying the installation of a complete, code-compliant lighting system. The occupancy sensing portion of the sensor uses Passive Infrared (PIR) technology with Auto-on/Auto-off operation. The lens in the center of the sensor directs the view of a heat detector component into multiple zones to sense the heat emitted by occupants moving through the room. The sensor is preset to go between full on and % brightness, never leaving the area dark. To trigger the light to full on, an occupant must move from one zone to another. When motion through the various zones ceases, the sensor logic concludes the room is unoccupied, and begins a count-down timer. By default, the timer is factory-set to 2 minutes, and can be adjusted to, 1, 1 and 2 minute increments using the optional remote control, model number HHPRG-MS. Any motion detected between zones during the stop the timer and the light will remain on. When motion is detected, a red LED located behind the lens will blink. In addition to the default on/off function, the sensor has an Energy Saver feature, where the light can be set to dim to a preset level after half of the count-down timer, and when no further motion is detected to the remainder of the count-down, the light will shut off. The Energy Saver feature preset level and feature are configured using the optional remote control. See the Sensor Programming Guide that comes with the HHPRG-MS remote for details on this feature. The red LED indicator will also blink repeatedly to confirm any programming change. The daylight harvesting portion of the sensor uses a small photoreceptor behind the occupancy sensing lens. The sensor continuously measures the available light in the room, even when the fixture is turned off. This allows sensor to operate in one of three daylighting modes, where the artificial light from the paired Metalux luminaire can be set to dim or brighten based on the amount of available light from surrounding natural and artificial light. Since the sensor measures light from its luminaire along with other light sources, this sensor follows a closed-loop daylight harvesting style. The first mode, Daytime, is active when the sensor detects light of at least 1 lux in the room. In Daytime mode, when the light is turned on after detecting occupancy, the sensor will begin balancing the luminaire light level relative to the total available light it measures. The default light balancing target is lux. This level can be adjusted higher or lower using the optional HHPRG-MS remote, pressing SET and then pressing the DO (Daytime Occupied) button. The Daytime Unoccupied, DU has a default of level of % to prevent the lights from turning off completely when unoccupied. More details on this function are found in the Sensor Programming Guide for the HHPRG-MS remote. The next two modes, Twilight and Nighttime, function in a similar way, allowing the artificial light to dim or brighten to different levels based on the surroundings. While primarily for use in outdoor luminaires, these modes are available for use in areas with a wide range of natural light, including atriums, day lit stairwells, and rooms with large or continuous windows. The Twilight mode is active when the sensor detects -1 lux in the off position, and has a 3 lux default light balancing target. The Nighttime mode is active when the sensor detects less than lux, and has a 2 lux default light balancing target. Like the Daytime mode, there are separate settings for Twilight Occupied ( TO ), Twilight Unoccupied ( TU ), Nighttime Occupied ( NO ) and Nighttime Unoccupied ( NU ) which can be adjusted and set using the optional HHPRG-MS remote. In addition to use for programming the sensor, the optional HHPRG-MS remote can be used to override the functions of the sensor temporarily. The remote has raise/lower buttons to adjust the light level for special tasks, as well as a power button to turn the lights on or off. Unless the SET button and another function is selected, any changes made using these buttons will revert to the programmed settings after the sensor has not detected occupancy for its programmed time, turned to Off mode. At the next detection of occupancy, the sensor will revert to its programmed settings for count-down timer and light balancing. Coverage Patterns next page Peachtree City, GA 3269 P: 77-486-48 21-9-29 14:27:1
NU SENSOR DETAILS - SVPD1 Coverage Pattern Coverage Top View C L 3.3m [1 ft.] m [ ft.] Major Motion m [ ft.] m [ ft.] Reccomended Mounting Height 8 12 ft. SVPD2 Coverage Pattern [3 ft.] Top View C L [2 ft.] 4.m [1 ft.] 3m [1 ft.] 1.m [ ft.] 1.m [ ft.] 3m [1 ft.] 4.m [1 ft.] [2 ft.] 2. [8 ft.] [2 ft.] [1 4.m 3m ft.] [1 ft.] [ 1.m ft.] 1.m 3m 4.m [ ft.] [1 ft.] [1 ft.] [2 ft.] [3 ft.] [3 ft.] Optional Remote Control Raise/ Lower SVPD3 Coverage Pattern Time Out DU 1 LO HI 1 SET ES 2 DO TO Scenes: TU To save scenes press SET and select scene NO [2 ft.] Programming Remote HHPRG-MS [3 ft.] 12.2m 3m [4 ft.] [3 ft.] [2 ft.] [1 ft.] 3m 12.2m [1 ft.] [2 ft.] [3 ft.] [4 ft.] HHPRG-MS Remote Peachtree City, GA 3269 P: 77-486-48 21-9-29 14:27:1