UP TO 3 Collection HE
Company profile Unical produces boilers, both for domestic and commercial use, as well as air conditioning systems, with the highest observance for the Quality of life ; we aim with our products to give: greatest comfort, higher safety, lower energy consumption, high environmental respect. Unical products, technologically innovative, anticipate the continuous evolution of the market. Since 1972, the year of Unical s foundation, important investments have been repeatedly designated to the planning and construction of job centres. These assure the highest quality standards throughout all the different phases of industrial production. Through our research and development centre we ensure the process of constant technological innovation synonymous with the name of Unical. The largest volumes of production are concentrated in the factories of Caorso (PC) and Carbonara PO (MN), which are in the forefront of automation and robotization. In the main factory wall hung and floor standing gas fired boilers, both with atmospheric or premixed burners, (from 3 to 900 ) are assembled. In the second factory, floor standing atmospheric gas boilers, wood fired, steel boilers equipped with oil or gas pressure jet burners (from 11 to 4000 ), steam boilers, superheated water boilers and diathermic oil boilers are assembled. From the strong employment of qualified human resources and from the significant investments in research, development and training, are born the Unical projects for the future, the challenges and the ideas that in turn, produce successful products. The electronics and laboratory research projects are one of the keys that allow Unical to obtain results updated to the best international technology. Capillarity, reliability and swiftness are provided from a network of technicians, trained and continuously updated at the Study Centre at Caorso. These courses both theoretical and practical, pay particular attention to the current and intended industry standards, developments and trends. Head office: 46033 Casteldario (MN) via Roma, 123 tel. +39 0376 7001 fax +39 0376 6606 mail: estero@unical-ag.com www.unical.ag Production plants: 29012 Caorso (PC) via Padana Inferiore, 2/C tel. +39 023 82241 fax +39 023 82228 46020 Carbonara Po (MN) via Roncada, 81 tel. +39 0386 807011 fax +39 0386 41781
The condensing era The general consensus of global politics promotes low consumption energy choices, and, at the same time makes us aware of the need for environmental friendly solutions. One result of these factors is the condensing boiler. Unical, among the first manufacturers to develop and promote this technology, now introduce the LKON HE collection. 10 boiler models: Heating only Heating and instantaneous D.H.W. production Heating and D.H.W. production by storage tank Designed to combine comfort with maximum installation flexibility. The wide product range allows for all boiler installations to provide total flexibility to meet end user needs. ll the LKON HE boilers besides possessing the requirements needed to be certificated in the highest efficiency class, SEDBUK, also provide a very high modulation ratio, up to 1:6. Because this and the condensation process, fuel consumption is very much reduced in comparison to traditional systems. t the heart of these products is the luminium/silicon/ Magnesium alloy high efficiency heat exchanger alloy, which is confidently guaranteed for years. LKON R HE & C HE modulation up to 1: LKON R HE SYSTEM BOILERS Heating only (can be combined with an external cylinder for D.H.W.) LKON C HE COMBI BOILERS Instantaneous D.HW. (Production via stainless steel plate heat exchanger) model LKON HE Nominal output Condensing mode Traditional mode Nominal input (GCV) SEDBUK SEDBUK Efficiency Rating η % 18 R 24 R 18 C 24 C 4.7 18.4 4.2 17.7 4.8 19.98 4.7 23.8 4.2 23.3 4.8 26.4 4.7 18.4 4.2 17.7 4.8 19.98 90.1 4.7 23.8 4.2 23.3 4.8 26.4 90.1 LKON SR HE & SC HE modulation up to 1:6 LKON SR HE SYSTEM BOILERS Heating only (can be combined with an external cylinder for D.H.W.) LKON SC HE COMBI BOILERS Instantaneous D.HW. (Production via stainless steel plate heat exchanger) model LKON HE 28 SR 3 SR 28 SC 3 SC Nominal output Condensing mode Traditional mode Nominal input (GCV) SEDBUK Efficiency Rating η % SEDBUK.88 28.47.16 27.33 6.1 31.1.88 3.0.2 33.8 6.1 38.3 90.3.88 28.47.16 27.33 6.1 31.1 90.1.88 3.0.2 33.8 6.1 38.3 LKON SLIM HE *) modulation up to 1:6 LKON SLIM HE COMBI BOILERS Instantaneous DHW (Production via stainless steel plate heat exchanger) model LKON SLIM HE Nominal output Condensing mode Traditional mode Nominal input (GCV) SEDBUK Efficiency Rating η % 28 SLIM.94 29.9.3 27. 6.1 31.1 90.3 3 SLIM.94 34.3.3 33.3 6.1 37.74 90.3 SEDBUK *) The SLIM is only 18 cm deep. It is designed for both for outdoor and indoor installations, especially where appliance depth is essential (behind internal doors for instance).
Efficiency and simplicity prudent investment Designed to answer the recent efficiency requirements, and suitable to enjoy the fiscal advantages connected with the condensing boilers, the whole LKON HE range is based on the energy supplied by a condensing heat exchanger, and the quality of the combustion resulting from the premix burner and the advanced electronic controls Premix burners The LKON HE boilers have a combustion system equipped with total premix burners. special modulating fan, controlled by the main electronic PCB, determined by the output request sucks the exact quantity of gas to be burnt, thus avoiding waste and giving very low polluting emissions. The warm combustion gases, resulting from the combustion of natural gas (CH 4 ) with the Oxygen (O 2 ), very rich in water steam (CH 4 + 2O 2 = CO 2 + 2H 2 O), crosses the aluminium heat exchanger loses heat, cools down and, condensing, produces about one litre of water for each m 3 of burnt gas. This recovered energy, condensation heat or recovery of latent heat becomes an economic saving, not provided by traditional boilers. Self-adaptation The use of the premix burner provides the boiler with the capacity to adjust the output depending on the smoke side resistance,thus resolving any problems connected with the execution of the flue ducts. Controls and Commands Electronic modulation: The LKON HE range of boilers introduce specific functions in the control of the output and operational levels. The temperature and output regulations, once planned, are automatically checked with the aid of modulating thermostats and external temperature sensors. uto-diagnosis and safety: The powerful microprocessors on the panel board provide an exceptional level of safety and breakdown prevention, due to the auto-diagnosis in real time.
In tune with the environment The aluminium, the silicon, the magnesium for the motor The condensing heat exchanger, in order to withstand the corrosion of acid condensate and to guarantee a high thermal efficiency, is constructed with an aluminium/silicon/magnesium alloy. The aluminium is the basic constituent, the silicon increases the resistance to the high temperatures and the magnesium facilitates the machining. The cast section is formed by two half-shells, that, on the exhaust side, have fins that increase with downward density, where the smoke condensation takes place. Between the 2 half-shells is drawn the exchange circuit of the water that, crossing them, in ascending way, with helical arrangement, guarantees an exceptional counter-current heat exchange giving minimum environmental pollution. Main features Dense fins on heat exchanger Low water content Low thermal inertia High speed of exchange bsence of overheating phenomena in every working condition year guarantee Because its particular technical configuration, synonymous of quality and safety. The heat exchanging boiler body of the whole LKON HE range is supplied with a year guarantee. Quality and saving The range offers top performances in terms of operation and cost saving: Reduced consumption: due to the condensation and the excellent modulation ratio, up to 1:6. Installation flexibility: with the management of 2 heating zones at different temperatures. High D.H.W. production: thanks to the oversized stainless steel plate heat exchangers of which they are equipped. dditional functions s with all the Unical boilers, a fully comprehensive range of accessories is available Flue lengths to 30 meters (with twin duct Ø80/80 mm). Flues with Ø 60 mm duct. Management of 2 heating zones at different temperatures. Operation in sliding temperature. ntifreeze protection. nti-jamming pump and diverting valve Pump over-run to prevent overheating Service operation button Modulating chrono-thermostat (optional). Outer temperature sensor (optional).
LKON R/C HE LKON HE 18 R - 24 R - 18 C - 24 C MODEL LKON HE 18 R 24 R 18 C 24 C Nominal output Condensing mode Traditional mode 4.7 18.4 4.2 17.7 4.7 23.8 4.2 23.3 4.7 18.4 4.2 17.7 4.7 23.8 4.2 23.3 Nominal input (GCV) 4.8 19.98 4.8 26.4 4.8 19.98 4.8 26.4 SEDBUK Efficiency Rating η % 90.1 90.1 SEDBUK LKON HE is available in room sealed versions for heating only, or instantaneous combi with an output, in condensation mode, of 18 and 24. Reduced consumption, because working in condensing conditions and with an excellent modulation ratio up to 1:, that reduces the on/off periods. Efficiency Rating: SEDBUK. Ultra-flat primary heat exchanger in l/si/mg alloy, with a depth <12 cm. Fast D.H.W. production. Ideal installation flexibility for all heating circuits, with the control ability for 2 zones working at different temperatures (high/low) through modulating chrono-thermostats and external temperature sensors. D.H.W. production up to 11.2 litres/min, (raised through 30 C) with a special stainless steel plate heat exchanger (model 24 C). Quieter operation, thanks to the new system air/gas pre-mixer. Digital Display. Compact dimensions: 700x420x310 mm. Hot Showers, Short Wait Thanks to an innovative microprocessor, the LKON HE responds promptly to the requests for sanitary hot water: a plus for the user, that allows them to maintain to the pre-set temperature. The special stainless steel plate heat exchanger, whose particular design, with cross channels, increases the efficiency in comparison to the standard models of same surface, so offering a powerful and constant water supply.
LKON R/C HE The details Main features Efficiency Rating: SEDBUK. Exclusive ultra-flat heat exchanger in l/si/mg alloy with high speed water circulation. Premix modulating burner with constant air/gas ratio, low NOx (class according to EN 483). Flue lengths to 0 meters (with twin duct Ø 80/80 mm). Flues with Ø 60 mm duct. Management of 2 heating zones at different temperatures. Operation in sliding temperature. Modulating gas valve. Three speed modulating pump with automatic air vent. Frontward rotating panel board with retroilluminated multifunction display and user friendly buttons. ntifreeze protection. nti-jamming for pump and diverting valve. Pump over-run to prevent overheating. Service operation button. Multigas operation burner (Natural or LPG). Protection degree IP X4D. Hydraulic connections. Modulating chrono-thermostat (optional). Outer temperature sensor (optional). Maximize the seasonal efficiencies The electronics of this series are able to support modulating chrono-thermostats and external temperature sensors. The reduction of the on-off periods and the immediate answer to weather variations increase the comfort, and reduce the CO 2 emissions, due to the continuous search for maximum efficiency at the minimum possible temperature. To manage 2 zones with 2 thermostats! The LKON HE is also flexible in installation. Ideal for all central heating circuits, thanks to the electronics that, besides the operation control and diagnostics, allows for the management of 2 zones working at different temperatures (high temperature for radiators and fan-coils, low temperature for under-floor heating). Ultra-flat, completely cooled, condensing heat exchanger in l/si/mg alloy Modulating gas valve regulating the flame according to the actual needs of the user Special high-efficiency stainless steel plate heat exchanger crossed channels SISTEM BSCULNTE SISTEM BSCULNTE Frontward rotating panel board for an easy access to the inside components M
LKON R/C HE The panel board llowing the user to exploit all the potentialities of the boiler. The panel boards of the LKON HE 18 R - 18 C - 24 R - 24 C are visible in the dark, easy to be used by all. The retro-illuminated, multifunction display allows: Reading of heating and D.H.W. temperatures Visualization of the burner lock-out Operation and stand-by status Diagnostics with fault indication Info display Manometer Reset push button Service operation button Boiler temperature adjusting knob D.H.W. temperature adjusting knob Dimensions and technical data LKON HE 18 R 24 R 18 C 24 C Capacities NOMINL OUTPUT min./max. in CONDENSING mode 4.7 18.4 4.7 23.8 4.7 18.4 4.7 23.8 NOMINL OUTPUT min./max. in TRDITIONL mode 4.2 17.7 4.2 23.3 4.2 17.7 4.2 23.3 NOMINL INPUT (GCV) Efficiency 4.8 19.98 4.8 26.4 4.8 19.98 4.8 26.4 700 mm SEDBUK Efficiency Rating η % 90.1 90.1 SEDBUK Combustion CO 2 at min./max. output % 9.-9. 9.-9. 9.-9. 9.-9. NOx (weighted value according to EN 483) mg/h 3. 38.8 3. 38.8 Max CONDENSTE PRODUCTION NOx class Heating TEMPERTURE RNGE IN HETING mode TEMPERTURE RNGE IN D.H.W. mode D.H.W. production with t=30 C TOTL CONTENT OF HETING EXPNSION VESSEL Electrical supply TENSION/FREQUENCY MX. BSORBED POWER Weight and technical features NET WEIGHT INSULTION DEGREE PPLINCE GS CTEGORY kg/h C C l/min l V/Hz W kg IP 2.9 30-8 - - 6 230/0 120 33 X4D II 2H3P 3.83 30-8 - - 6 230/0 132 33 X4D II 2H3P 2.9 30-8 38-60 8.6 6 230/0 120 36 X4D II 2H3P 3.83 30-8 38-60 11.2 6 230/0 132 36 X4D II 2H3P 420 mm Options 310 mm Stainless steel D.H.W. storage tank model DSP 110 (110 litre capacity) to be combined with LKON 18 R HE and 24 R HE Kit for D.H.W. storage tank, made of: - NTC D.H.W. temperature sensor - Harness
LKON SR HE LKON HE 28 SR - 3 SR MODEL LKON HE 28 SR 3 SR Nominal output Nominal input (GCV) SEDBUK Condensing mode Traditional mode SEDBUK Efficiency Rating η %.88 28.47.16 27.33 6.1 31.1.88 3.0.2 33.8 6.1 38.3 90.3 The LKON SR HE model (only heating) represents the evolution of flexibility in heating installation: the 28 and 3 outputs satisfy the most demanding C.H. installations and, with the dedicated connection kits, can be combined with a wide range of D.H.W. storage tanks. Reduced consumption because working in condensing conditions and with an excellent modulation ratio up to 1:6, that reduces gas consumption in comparison to traditional boilers, with higher efficiencies and reduction of the on/off periods. Ideal installation flexibility for all heating circuits, with the control possibility for 2 zones working at different temperatures (high/low) through modulating chrono-thermostats and external temperature sensor. User friendly panel board. LKON SR HE, combined with the D.H.W. storage tank DSP 110, becomes an excellent combi boiler able to satisfy all sanitary hot water demands. Features: Ultra-fast stainless steel D.H.W. tank, in ISI 316L with helicoidal heat exchanger. HD PU for strong insulation. 3 way motorized diverting valve 4 litre D.H.W. expansion vessel. Options: D.H.W. storage tank loading pump kit. Kit for D.H.W. tank, made of: - NTC D.H.W. temperature sensor - Harness - 3 way diverting valve. DSP 110 inox
LKON SC HE LKON HE 28 SC - 3 SC MODEL LKON HE 28 SC 3 SC Nominal output Nominal input (GCV) SEDBUK Condensing mode Traditional mode SEDBUK Efficiency Rating η %.88 28.47.16 27.33 6.1 31.1 90.1.88 3.0.2 33.8 6.1 38.3 Ultra-flat primary heat exchanger in l/si/mg alloy, with a depth <12 cm. Hot Showers, Short Wait Thanks to an innovative microprocessor, the LKON HE responds with promptly to the requests for sanitary hot water: a plus for the user, that allows to them maintain, the pre-set temperature. The special stainless steel plate heat exchanger, whose particular design, with cross channels, increases efficiency in comparison to standard models of the same surface, so offering a powerful and constant water supply. To Manage 2 zones with 2 thermostats! The LKON HE is also flexible in installation. Ideal for all central heating circuits, thanks to the electronics that, besides operational control and diagnostics, allows the management of 2 zones working at different temperatures (high temperature for radiators and fan-coils, low temperature for under-floor heating). Maximize the seasonal efficiencies The electronics of this series are able to support modulating chrono-thermostats and external temperature sensors. The reduction of the on-off periods and the immediate answer to the weather variations increase comfort, and reduces CO 2 emissions thanks to the continuous search for maximum efficiency at the minimum possible temperature.
LKON SR/SC HE The control panel Simple to use due to 2 large selection knobs which permit boiler ignition, central heating adjustment 30-80 C and domestic hot water adjustment 3-60 C (for the tank). The temperature-pressure gauge controls the boiler temperature and pressure, as well as the various system power on, CH mode, burner on and indicator leds. Over 14 different led indicators highlight system problems at a glance, from no water to a NTC sensor fault, providing a diagnostic facility for both, the user and the installer. ccessory ll LKON HE models are suitable for the installation of M 3000 S, an electrohydraulic device, which enables the management of high (radiators) and low temperature zones (underfloor) at the same time. The vide choice of accessories are designed to solve every installation requirement. Detailed view of control panel M 3000 S Dimensions and technical data LKON HE 28 SR 3 SR 28 SC 3 SC Capacities NOMINL OUTPUT min./max. in CONDENSING mode.88 28..88 3.0.88 28..88 3.0 NOMINL OUTPUT min./max. in TRDITIONL mode.2 27.3.2 33.8.2 27.3.2 33.8 NOMINL INPUT (GCV) Efficiency 6.1 31.1 6.1 38.3 6.1 31.1 6.1 38.3 SEDBUK Efficiency Rating η % 90.3 90.1 SEDBUK Combustion 70 CO 2 at min./max. output % 9.0-9.2 9.0-9.2 9.0-9.2 9.0-9.2 NOx (weighted value according to EN 483) mg/h 49.6 38.2 49.6 38.2 Max CONDENSTE PRODUCTION kg/h 4.7.9 4.7.9 NOx class Heating TEMPERTURE RNGE IN HETING mode TEMPERTURE RNGE IN D.H.W. mode D.H.W. production with t=30 C TOTL CONTENT OF HETING EXPNSION VESSEL Electrical supply TENSION/FREQUENCY MX. BSORBED POWER Weight and technical features NET WEIGHT INSULTION DEGREE PPLINCE GS CTEGORY C C l/min l V/Hz W kg IP 30 / 80 - - 7 230/0 130 39 X4D II 2H3P 30 / 80 - - 8 230/0 143 46 X4D II 2H3P 30 / 80 3-60 13 7 230/0 130 39 X4D II 2H3P 30 / 80 3-60 14.7 10 230/0 10 46 X4D II 2H3P 32, 398
LKON SLIM HE LKON SLIM HE MODEL LKON SLIM HE 28 SLIM 3 SLIM Nominal output Condensing mode Traditional mode Nominal input (GCV) SEDBUK SEDBUK Efficiency Rating η %.94 29.9.3 27. 6.1 31.1 90.3.94 34.3.3 33.3 6.1 37.74 90.3 thin difference... LKON SLIM HE is the new way of conceiving condensation. New for the revolutionary dimensions, new for the output and the flexibility, new for the efficiency in indoor or outdoor installations. First is the external aspect, to provide choice, followed by its technical qualities: Reduced consumption, because of the modulation ratio1:6, the furnished output is always exactly the one required by the user, thus avoiding any waste. Practicality: LKON SLIM HE can be installed in any room thanks to its 18 cm depth and the possibility to be installed outdoors because of its protection degree IP XD. Safety and Silence: protection degree IP XD, antifreeze protection up to -1 C and a rubber top for protection against rain guarantee an outdoor installation without problems. The remote thermo-controller, will allow to comfortable control of the boiler from inside.
LKON SLIM HE The details Main features Efficiency Rating: 90.3 % Exclusive ultra-flat heat exchanger in l/si/mg alloy with high speed water circulation. D.H.W. 24 stainless steel plate heat exchanger Premix modulating burner with constant air/gas ratio, low NOx (class according to EN 483). Flue lengths to 0 meters (with twin duct Ø 80/80 mm). Modulating chrono-thermostat for remote control, standard supplied Three speed modulating pump with automatic air vent. CLEVER automatic filling system: after 3 automatic reinstatements in 24 hrs the boiler gives a sound signal. Management of 2 heating zones at different temperatures. Operation in sliding temperature. ntifreeze protection. Service operation button. nti-jamming for pump and diverting valve. Pump over-run to prevent overheating. INDOOR and OUTDOOR installation (IP XD) Rubber top for protection against rain. Multigas operation burner (Natural or LPG). OUTER TEMPERTURE SENSOR: optional. Condensing heat exchanger in l/si/mg alloy MODULTION RTIO 1:6 37.74 6,1 Exceptional output modulation ratio 6 4 3 2 1 Increased D.H.W. heat exchanger (28 plates) Weekly modulating remote controller Conforming to the requirements of the international classification EN 13203/0 the LKON 3 SLIM HE has received the prestigious award of 3 taps, thanks to its sophisticated D.H.W. production system, providing the user with: high specific flow rate (16.7 l/min with t = 30 C) 18 only centimetres deep! 1 2 3 4 6 7 8 9 10 11 12 13 14 1 16 17 18
LKON SLIM HE Regolafacile std. supplied The boiler controls are within easy reach thanks to the remote controller REGOLFCILE. llowing the automatic boiler output and flow temperature modulation (depending on the room temperature), it reduces the consumption and will quickly reach, with precision, the desired room temperature. Through the REGOLFCILE, it is possible: To plan the heating programs, both, daily and weekly, with more temperature levels To automatically fill/reinstate the C.H. circuit To connect the outer temperature sensor in order to control the boiler operation depending on the actual outdoor temperature To reset the boiler operation after a lockout To manage the boiler/installation antifreeze system To manage the Service operation button for the combustion setting To display all the abnormal conditions Dimensions and technical data LKON SLIM HE 28 SLIM 3 SLIM Capacities NOMINL OUTPUT min./max. in CONDENSING mode.94 29.9.94 34.3 NOMINL OUTPUT min./max. in TRDITIONL mode.3 27..3 33.3 NOMINL INPUT (GCV) 6.1 31.1 6.1 37.74 Efficiency SEDBUK Efficiency Rating η % 90.3 90.3 SEDBUK Combustion 880 CO 2 at min./max. output NOx (weighted value according to EN 483) Max CONDENSTE PRODUCTION NOx class Heating % mg/h kg/h 9. - 9. 38.2.76 9. - 9. 41.2.77 TEMPERTURE RNGE IN HETING mode C 30 / 8 30 / 8 TEMPERTURE RNGE IN D.H.W. mode C 3-60 3-60 D.H.W. production with t=30 C l/min 14 16.7 TOTL CONTENT OF HETING EXPNSION VESSEL Electrical supply l 6 6 180 480 TENSION/FREQUENCY MX. BSORBED POWER Weight and technical features V/Hz W 230/0 130 230/0 130 NET WEIGHT INSULTION DEGREE PPLINCE GS CTEGORY kg IP 46 XD II 2H3P 46 XD II 2H3P NOTE: For indoor installations verify, before the boiler installation, the possible positions of the smokes evacuation duct, available also on the site web.
CCESSORIES CONCENTRIC FLUE CCESSORIES SEPRTE FLUE CCESSORIES Ø 80 mm SEPRTE FLUE CCESSORIES Ø 60 mm HYDRULICS CCESSORIES WLL MOUNTING TEMPLTE ELECTRONIC CCESSORIES
CCESSORIES Concentric flue accessories PICTURE CODE DESCRIPTION MODEL Type Ø 60/100 LKON HE 18/24 R-C LKON HE 28/3 SR-SC LKON HE 28/3 SLIM 00361862 CONCENTRIC KIT Ø 100/60 00361730 CONCENTRIC KIT Ø 100/60 KIT700C CONCENTRIC VERTICL DPTER WITH FLNGE Ø 60/100 mm KIT810C CONCENTRIC ELBOW 90 M/F Ø 60/100 mm KIT740C CONCENTRIC DUCT Ø 60/100 mm L=1 m 00360674 CONCENTRIC DUCT Ø 60/100 mm L=0, m KIT800C HORIZONTL CONCENTRIC TERMINL Ø 60/100 mm Type Ø 80/12 00361334 Ø 60/100 MM TO Ø 80/12 mm REDUCER + KIT700C + KIT700C 0036037 CONCENTRIC ELBOW M/F Ø 80/12 mm 90 00360371 CONCENTRIC ELBOW M/F Ø 80/12 mm 4 KIT730C CONCENTRIC DUCT Ø 80/12 mm L=1 m 0036126 HORIZONTL CONCENTRIC TERMINL Ø 80/12 KIT820C VERTICL CONCENTRIC FLUE CHIMNEY Ø 80/12 mm TSC0480C CHIMNEY TILE FOR PITCHED ROOF TSC0490C CHIMNEY TILE FOR FLT ROOF
CCESSORIES Separate flue accessories Ø 80 mm PICTURE CODE DESCRIPTION MODEL LKON HE 18/24 R-C LKON HE 28/3 SR-SC LKON HE 28/3 SLIM 00361731 TWIN PIPE KIT Ø 80 mm (TYPE B ) 0036164 B23 DPTOR KIT KIT720C TWIN PIPE DPTOR KIT + 0036124 0036143 TWIN PIPE DPTOR KIT TSC0130C 90 BEND WITH WIDE RDIUS Ø 80 mm TSC010C 90 BEND WITH NRROW RDIUS Ø 80 mm TSC00C 4 BEND Ø 80 mm 0036124 VERTICL CONDENSING TRP+TESTING POINT Ø 80 mm TSC0730C VERTICL CONDENSING TRP Ø 80 mm KIT760C DUCT Ø 80 mm L = 0, m KIT70C DUCT Ø 80 mm L = 1 m KIT780C HORIZONTL FLUE INLET TERMINL Ø 80 mm KIT770C HORIZONTL FLUE OUTLET TERMINL Ø 80 mm KIT790C FLUE OUTLET CHIMNEY Ø 80 mm KIT830C FLUE INLET/OUTLET CHIMNEY Ø 80 mm TSC0480C CHIMNEY TILE FOR PITCHED ROOF TSC0490C CHIMNEY TILE FOR FLT ROOF
CCESSORIES Separate flue accessories Ø 60 mm PICTURE CODE DESCRIPTION MODEL LKON HE 18/24 R-C LKON HE 28/3 SR-SC LKON HE 28/3 SLIM 00360360 Ø 80 TO Ø 60 mm REDUCER 0036036 Ø 60 TO Ø 80 mm REDUCER 0036031 90 BEND Ø 60 mm 00360368 4 BEND Ø 60 mm 0036032 L = 0, m BEND Ø 60 mm 0036033 L = 1 m BEND Ø 60 mm 003603 HORIZONTL FLUE INLET TERMINL Ø 60 mm 0036034 HORIZONTL FLUE OUTLET TERMINL Ø 60 mm Hydraulics accessories PICTURE CODE DESCRIPTION MODEL LKON HE 18/24 R-C LKON HE 28/3 SR-SC LKON HE 28/3 SLIM 00361849 DHW KIT FOR CYLINDER R version 00360742 GENERIC DHW KIT FOR CYLINDER R version R version 00361712 INTERNL DHW KIT FOR CYLINDER R version 00361666 ELECTRIC NTIFROST KIT FOR SIPHON 00361190 ELECTRIC NTIFROST KIT FOR WTER PIPE
CCESSORIES Wall mounting template PICTURE CODE DESCRIPTION MODEL LKON HE 18/24 R-C LKON HE 28/3 SR-SC LKON HE 28/3 SLIM 00361244 WLL MOUNTING TEMPLTE 0036179 WLL MOUNTING TEMPLTE 00361786 WLL MOUNTING TEMPLTE Electronic ccessories PICTURE CODE DESCRIPTION MODEL LKON HE 18/24 R-C LKON HE 28/3 SR-SC LKON HE 28/3 SLIM SND0140C OUTSIDE SENSOR 0026190 MODULTING ROOM TEMPERTURE CONTROLLER std. supplied 00262079 MODULTING ROOM TEMPERTURE CONTROLLER 0026260 00260737 DIGITL ON - OFF ROOM TEMPERTURE CONTROLLER NLOGICL ON - OFF ROOM TEMPERTURE CONTROLLER Ed. n 1-07/2010 - cod. 40499
G S.p.. 46033 casteldario - mantova - italy - tel. +39 0376 7001 - fax +39 0376 6606 - e-mail: info@unical-ag.com - www.unical.ag