Bree Murphy, RCDD National Training, Applications Engineer bam@oberoninc.com 412-328-5710 Professional Wi-Fi Installation Solutions Apr 26-17
Oberon Company Overview Oberon is a family owned business. The world HQ is located in beautiful State College, PA Products are manufactured and stocked in New Kensington, PA
Oberon Company Overview Oberon is the original designer and manufacturer of WiFi mounting options Oberon engineers have been designing WiFi infrastructure solutions since 1999 Many of the designs are the result of customer input and suggestions All products are tested by experienced engineers
Oberon Company Overview Oberon products are used to support challenging areas within customer WiFi infrastructures Simplify future moves, adds and changes Oberon s products have helped thousands of customers to achieve secure, convenient and aesthetic professional WiFi Installations.
Oberon and Extreme Networks
Oberon and Extreme Networks Oberon is an approved manufacturer of Wireless LAN access point mounting solutions within the Extreme Networks Partner Alliance All products are tested by experienced Extreme Networks and Oberon engineers Largest variety of solutions for all verticals We utilize the design and hardware of the Extreme WAPs to make Installation easy and quick. All Oberon products are virtually transparent to the wireless signal All Oberon products are paintable
Access Point Mounting Solutions
Oberon supports all Verticals K-12 Industrial/ Manufacturing Plants Healthcare Government and Local municipalities Higher Ed Hospitality/ Airports/Retail Service
Oberon supports Challenging Deployments Stadiums Hot Spots Basketball Arenas/ K-12 Gymnasiums Residence Halls/ Frat houses Parks Auditoriums Parking garages
Ceiling Mount Challenges/Concerns and Solutions
Ceiling mounting Clipping to grid Customer Challenges Better aesthetics Concerned about WAP re-location Holes left in tiles Hole in the ceiling tile Thick Cat 6a cord lifting the tile too much Cable is cinched Customers want an Easier and better way to get the cable installed to WAP, while maintaining aesthetics
Ceiling mounting Clipping to grid Customer Challenges A solution that can professionally stow excess horizontal cable, patch cord Slack, and two port Biscuit Box Concerned about the dust build up on your cabling Infrastructure connections in the ceiling? Want a faster, easier way of migrating to new WAP?
Ceiling mounting Clipping to grid Hospital Challenges Certain areas of the hospital where Airborne Infectious Disease may escape through the gaps to patient area - Want a better way to simplify Hospital ICRA procedures - Save money by not needing the expensive NEPA tents and HEPA filters - Sealing the holes and gaps with silicon/caulk/sealant restricts future access - What does the sealant do the 2-4 hour burn rating? - Want entrance to the Access Point without lifting the ceiling tile
Ceiling Mounts offer Eliminates the cable being cinched between tile and grid Looks better Eliminates the hole in the tile to get the cable attached to the WAP Saves their tile Re-location is made easy Back box can stow excess cables, cords and biscuit jacks Back box acts as an effective dust barrier Satisfies National Electric Code compliance (Plenum rated) - Can put nom-plenum cords and biscuits in the ceiling Makes upgrades easier and faster Doors and trims are interchangeable Simplifies Hospital ICRA procedures No need for tents on your next upgrade, or Sealing holes and gaps Lockable door options for security Aesthetics A more professional installation
Oberon Solutions for Extreme Networks Model 3935i 802.11ac Wave 2 Feature packed New form factor- Heavier and larger 2.5Gbps over-the-air performance
Economical 2x2 ceiling tile enclosure Model 1046-EXT3935 Lockable and interchangeable door Back box is an effective dust barrier Helps simply ICRA procedures UL Listed, NEC compliant
Right Angle bracket hard wall deployment Enables horizontal orientation AP is partially recessed into bracket Can be mounted directly over TO, raceway, Electrical box Model 1006-EX3935 Powder coat finish is paintable.
NEMA 4X Indoor or Outdoor box Comes in various sizes with solid or clear door Protects the AP from weather, dust, impacts Large enough for external antennas Model 1024-C Hinged door, molded-in padlock hasps Transparent to the wireless signal Paintable
Indoor Non-metallic Lock box Rugged polycarbonate plastic is virtually transparent To the wireless signal Model 1016-00 Large enough for external antennas, small router, biscuit jack etc. Mounts directly over TO, electrical box, raceway Hinged door, lockable door Transparent to the wireless signal Paintable Simplify code, industry directives, policy, and aesthetics compliance Model 1016-C
Locking Recessed Wall Mount Enclosure 3 deep for Hard wall or Ceiling AP attaches to the Back Box Model 1076-WA Interchangeable doors for quick upgrades Unique wall bridge simplifies installation Transparent to the wireless signal Paintable UL listed, NEC compliant
2x2 Locking Ceiling Tile enclosure with Clear Dome Attractive, textured powder-coat finish matches Most ceilings Shallow 3 lightweight aluminum back-box Model 1077-CP AP attaches to the back-box Interchangeable doors for quick upgrades Helps simplify ICRA procedures Transparent to the wireless signal Paintable UL listed, NEC compliant
Universal Mounting Options
Open Ceiling mounting option Ceilings to high, wall restrictions Hanging conduit box Low profile hinged box ¾ trade size knockout for conduit Knockouts on 2 sidewalls Model 0900-HC Note: This product will not Accommodate Network Extreme Model 3935i due to the APs clip depth. Deep enough to stow excess cable, and biscuit jack inside of box
NEMA 4 rated w/rab Model 1020-RAB WiFi Parking garage ticketing systems quickly emerging Need NEMA 4 rated protection Weather, Temperature, Tampering, Impact resistance
Hard Wall Small APs Compact wall or ceiling mount box to physically protect WAPs Transparent to the wireless signal Model 1017 Non-metallic box Can mount directly over TO, to raceway Deep enough for a biscuit jack, and patch cord Tamper resistant screws for security Great for residence halls, hospitality, hospital rooms, etc.
Indoor Physical Security Lock boxes Model 1015-00 Note: This product will not Accommodate Network Extreme Model 3935i due to the APs clip depth. Model 1016-00 Model 1017-WH Wall/Ceiling mount non-metallic lock boxes to physically protect APs Can mount directly over TO, to raceway, or ceiling conduit
Education Market Gymnasiums/Basketball Arenas Model 1020 Note: This product will not Accommodate Network Extreme Model 3935i due to the APs clip depth. Impact Resistant Virtually transparent to the signal Model 1015 Lock box Note: This product will not Accommodate Network Extreme Model 3935i due to the APs clip depth. Paintable
High Ceiling Venues Model 1010 Model 1011 Model 1012 Right angle brackets 2 Axis articulating bracket for patch Antenna for signal pattern control Model 1013 2 Axis
High Ceiling Venues Model 1008-AP-COVER Beam clamp bracket and paintable vanity cover Beam mount conveniently installs in open ceiling environments Enables APs to be installed in the preferred horizontal orientation Beam mount clamps allow mounting directly to a beam or truss
Official WiFi Solutions Provider of Super Bowl LI
Model 3010 NEMA 4 Enclosure Protects the AP from weather, pressure spray, spilled liquids Impact resistant, UV stabilized Comes with a pivoting T-Bar inside the box Model 3010 Fits under seats, up in the corner under balconies or on steps that the public doesn t access.
Model 1020 Compact NEMA 4 enclosure for under seat WAP mount Model 1020-RAB w/right Angle Bracket for wall mount Physically protects from challenging environments Fits most WAPs Auditoriums, stadiums, large classrooms
Hot Spots Model 1024-C Compact NEMA 4 Model 1020-RAB w/pole Mount Kit Rugged polycarbonate enclosure protects the WAP from weather Impact resistant UV stabilized NEMA 1, 2, 4, 4X, 12, 13 Model 1020-00 Virtually transparent to the signal
Hot Spots cont Wi-Fi Direct Embedded Bollard Outdoor or indoor hot spots Secures the WAP in the top Large enough for AP & external antenna NEMA 4 Rated Protects from Weather and Tampering Model 3030-DE Height is optional Lobbies, Courtyards, Auditoriums Sports venues, parks
Wi-Fi Anchor Base Bollard Hot Spots cont Outdoor or indoor hot spots Secures the WAP in the top Large enough for AP & external antenna NEMA 4 Rated Protects from Weather and Tampering Model 3030-AB Height is optional Lobbies, Courtyards, Auditoriums Sports venues, parks
New Products
Model 1019 Aesthetic low profile recess wall mount Large enough for all manufacture WAPs Nearly disappears into the wall designed with engineers for aesthetic requirements Back box is open weave for easy cable installation Commercial and residential applications
Ceiling Tile Mounts - Low Profile, Easy installation 1044-FL Comes w/back box 1040-FL and 1044-FL For CEILING TILE mount 1040-FL Comes w/tile Bridge Aesthetic, seamlessly blends into the ceiling Quick and Easy install Tool-less, less loose hardware Textured ABS, thin low profile cover with torsion springs Metal back box (1042 and 1044) for public venues
Low Profile, Easy installation 1044-FL 1042-FL For HARD CEILING Mount 1040-FL and 1044-FL For CEILING TILE mount Aesthetic, seamlessly blends into the ceiling Quick and Easy install Tool-less, less loose hardware Textured ABS, thin low profile cover with torsion springs Metal back box (1042 and 1044) for public venues
High Density Applications 2x2 Ceiling mount Allows two APs and two directional antennas Articulating antenna capability AP securely attaches to the back box Interchangeable doors 1074-DOME Deep enough for a biscuit jack, and patch cord
Conceal the AP-Hard wall and ceiling Easier to install Fits most APs Textured ABS plastic 1041-WA Deep enough for a biscuit jack, and patch cord