Technology and design with Comfort and Energy Saving in mind Instantaneous Gas Water Heater Series
GMC group is located in Taiwan with more than 30-year experiences and capabilities on designing/producing key components of the instantaneous gas water heater series. In 2007, the instantaneous gas water heater division Tinco Tech, is established. Our mission and vision is to develop and supply the instantaneous gas water heater series with reliable and excellent performances on energy saving, safety and comfort by our core capabilities of designing and producing rigid-quality combustion systems. Exhaust Hood Secondary heat exchanger Primary heat exchanger Anti-frost sensor Anti-frost PTC heater Overheat sensor Combustion Chamber Gas manifold CSA/CE certified electronic controller Switching power supply By pass valve BLDC blower Water flow controller CSA/AGA certified gas valve Hot water outlet Cold water inlet
The key components we design and manufacture internally: Combustion chamber Gas manifold Water flow controller CSA/CE certified electronic controller Secondary heat exchanger Switching power supply Primary heat exchanger CSA/AGA certified gas valve Rigorous and continuously improving quality system CSA certified Energy Star certified AGA certified Water Mark certified Energy Label ISO 9001 TU certified ISO 17025 Lab TAF certified CSA Lab certified
AQUA Line Series Outdoor model LCD display panel By pass valve Step motor water flow controller 2~3 bathrooms
A D C B E C F A B D AQUA27e Operation Interface A. On / Program Key B. Reset Key C. Off Key D. Up Key E. Mode Key F. Down Key AQUA27i Operation Interface A. Up Key B. Down Key C. Temp. Unit D. On / Off Key Specification AQUA27e AQUA27i Product Features Gas valve CSA certified Electronic control system CSA/CE certified Gas Inlet Pressure Min. / Max. NG Propane W.C. W.C. 5 / 10.5 10 / 13.0 5 / 10.5 10 / 13.0 Digital electrical ignition LCD control panel Gas Rate Min./Max. Water Pressure Factory Default Temp. Min. Starting Flow Rate NG Propane Min. Max. BTU BTU psi psi GPM 12,500/195,000 12,500/195,000 20 150 100 0.71 12,500/195,000 12,500/195,000 20 150 100 0.71 Error code system Module design--easy maintenance Self-diagnostics Precision thermostatic control +/-1 Oxygen free copper heat exchanger Max. temp. hot water delivery: 50/55/60/75 By pass valve Energy Factor 83% 83% Step motor water flow controller Hot Water Capacity Range Temp. Raise @ 45 Adjustable Temp. Range GPM 7.2 97-167 7.2 97-167 Commercial and domestic models available Cascade application available Switching Power Supply olt / Hz 120/60Hz 120/60Hz Normal Operation watts 65 65 Electricity Consumption Standby watts 2 2 Anti-frost protection watts 100 100 Safety Functions Gas Supply Anti-frost detection 2 on, 10 off Service Connetions Cold Water Inlet Flame out detection Hot Water Outlet Over voltage detection Direct Electronic Ignition Installation Housing Dimension Net Weight Height Width Depth lb Outdoor 25.7 18 10.3 61 Indoor 25.7 18 11.8 61 Abnormal water pressure detection Multiple safety temp. detection Over heat detection Power failure detection Block flue detection BLDC blower degradation detection ent Type /Material: SUS 304 X Direct ent ent Diameter Air intake / exhaust X 5" / 3" Color (500 hrs salt spray test grade powder painted) CSA Certified to ANSI Z21.10.3 *CSA 4.3 Beige Beige
ECO Line Series Condensing tech Indoor/Outdoor models LCD display panel By pass valve Step motor water flow controller 3~4 bathrooms
A D C B E C F A B D ECO30e Operation Interface A. On / Program Key B. Reset Key C. Off Key D. Up Key E. Mode Key F. Down Key ECO30i Operation Interface A. Up Key B. Down Key C. Temp. Unit D. On / Off Key Specification Gas Inlet Pressure Min. / Max. NG W.C. Propane W.C. NG BTU Gas Rate Min./Max. Propane Min. BTU psi Water Pressure Max. psi Factory Default Temp. Min. Starting Flow Rate Energy Factor GPM Hot Water Capacity Range Temp. Raise @ 45 Adjustable Temp. Range Switching Power Supply GPM olt / Hz Normal Operation watts Electricity Consumption Standby watts Anti-frost protection watts Gas Supply Service Connetions Cold Water Inlet Hot Water Outlet Direct Electronic Ignition Installation Height Housing Dimension Width Depth Net Weight lb ECO30e ECO30i 5 / 10.5 5 / 10.5 10 / 13.0 10 / 13.0 12,500/195,000 12,500/195,000 12,500/195,000 12,500/195,000 20 20 150 150 100 100 0.71 0.71 92% 92% 8.1 8.1 97-167 97-167 120/60Hz 120/60Hz 65 65 2 2 100 100 Outdoor Indoor 27.6 27.6 18 18 10.3 11.8 70.5 70.5 Product Features Condensing tech (high efficiency) Gas valve CSA certified Electronic control system CSA/CE certified Digital electrical ignition LCD control panel Error code system Module design--easy maintainance Self-diagnostics Precision thermostatic control +/-1 Oxygen free copper heat exchanger By pass valve Step motor water flow controller Commercial and domestic models available Max. temp. hot water delivery: 50/55/60/75 Cascade application available Safety Functions Anti-frost detection 2 on, 10 off Flame out detection Over voltage detection Abnormal water pressure detection Multiple safety temp. detection Over heat detection Power failure detection Block flue detection BLDC blower degradation detection ent Type /Material: SUS 304 X Direct ent ent Diameter Air intake / exhaust X 5" / 3" Color (500 hrs salt spray test grade powder painted) CSA Certified to ANSI Z21.10.3 *CSA 4.3 Beige Beige
PUCADA TECH CO., LTD. (TAIWAN) TEL: 886-4-25625799 FAX: 886-4-25625978 E-Mail: amos@pucada.com Skype: amosclaire