Linergy II
Linergy II The advances in fluorescent lighting technology saw the birth of the successful Linergy family of industrial fluorescent luminaires. This helped realise significant energy savings against traditional discharge solutions in manufacturing, retail, sports hall and warehouse applications. Linergy II continues to embrace the further advances in T5 fluorescent technology with the new 73W lamp. In conjunction with the new optics this provides class leading performance, with even greater lumens per watt, aiding the global commitment to reduce the energy used by lighting in commercial buildings. In addition Linergy II now introduces an advanced rack reflector option with focused vertical illumination and enclosed versions for areas such as food preparation that require protection against lamp shatter. 2 England and Wales Cricket Board, Truro Linergy
Low energy fluorescent alternative to discharge lowbay and highbay luminaires Latest 73W T5 lamp option, with 10% less consumed energy than 80W T5 Advanced optical design for optimum energy efficiency - 82.6 lm/cw (LNA473Z) Full Enhanced Capital Allowance (ECA) compliance* across the range Purpose designed rack reflector option for focused vertical illumination Integral occupancy detector with photocell options maximise energy saving benefits Enclosed panel option for lamp and application area protection Integral self test emergency available DIMMING CONTROLS 3
Lamp and Control Gear 49W (HO), 73W (HO) T5 fluorescent, T5 4000 K - G5 Cap Energy efficient high frequency control gear as standard DALI Dimming options available Materials Body Full box steel construction powder coated in RAL9016 white finish Reflectors Satin finish, zero iridescence anodised aluminium Panel 3mm clear acrylic Wire guard Heavy duty zinc plated steel, 25mm grid size Installation Notes Options Fully integral emergency conversion, 3 hour duration Emergency versions available with automatic test functionality, reducing maintenance costs and offers ease of compliance with testing requirements Suitable for use on defined escape routes Wide area and rack reflector options provide efficient optics relevant to the task Enclosed clear acrylic panel option protects areas from lamp shatter Lighting control and energy management options including integrated occupancy and daylight detectors Top cowl for sports hall applications available to special order Specification To specify state: Surface mounted, F marked high/low bay luminaire, of full box welded construction with post coat powder paint finish, high performance satin reflectors for wide area/rack aisle, quick fit plug and socket connector and T5 high output lamps with integrated sensor / clear panel / protective wire guard options, as Cooper Lighting Linergy II range, part no. Suitable for ceiling, conduit, chain, rod and trunking mounting Quick fit mounting brackets fix to mounting surface (supplied) Supplied with reflectors and lamps pre-fitted, no need to remove during installation Enclosed IP20 clear panel option supplied complete with panel installed. Panel is secured with tool-less fixings and slides out for ease of maintenance Panel mount plug and socket for quick electrical connection Fused as standard Wire guard is a retrofit accessory for open versions, secured by screws, hangs for ease of maintenance Supplied complete with lamps Suspension brackets and connector (supplied) Plug and play installation Installed quick fit bracket 4
Dimensions 175 81 British Ceramic Tiles, Devon Linergy 68 492 513 L 918 150 898 944 Option L (mm) 4 x 49W/73W 1484 4 x 49W/73W with detector 1604 High performance optics and thermal optimisation 5
Photometric and Performance Data Cat. No. LNA473Z LOR: 0.99 ULOR: 0.03 DLOR: 0.96 SHR nom: 1.00 SHR max: 1.19 Utilisation factors / TM5 Reflectances Room Index 1.5 2.0 2.5 C W F 0.75 1.0 1.25 3.0 4.0 5.0 70 50 20 62 73 80 85 91 95 98 102 104 30 55 66 74 79 86 91 94 99 101 10 50 61 69 74 82 87 91 96 99 50 50 20 61 71 77 82 88 92 94 98 100 30 54 65 72 77 84 88 91 95 97 10 50 61 68 73 80 85 88 93 96 30 50 20 59 69 75 79 85 88 91 94 96 30 54 64 70 75 81 85 88 92 94 10 49 60 67 72 78 83 86 90 92 0 0 0 47 57 64 68 75 79 81 85 87 BZ-class 3 3 3 3 3 2 3 3 2 Integrated occupancy and daylight detector The high level PIR and photocell detector is a superb addition to the range. A key feature is the high level detection range, making it ideal in high ceiling applications such as warehouses, factories and large retail premises. The detection pattern has a 1 to 1 ratio of detection beam diameter to mounting height, such that at 16m mounting height the detection zone diameter on the floor is 16m. Linergy II offers switching or DALI dimming versions of the detector under the IHP prefix options. Sensor versions have dimming or switching output terminals for connection to slave luminaires. Cat. No. LNR473Z LOR: 0.98 ULOR: 0.03 DLOR: 0.95 SHR nom: 0.75 SHR max: 0.80 Utilisation factors / TM5 Reflectances Room Index 1.5 2.0 2.5 C W F 0.75 1.0 1.25 3.0 4.0 5.0 70 50 20 62 71 78 82 89 93 96 100 103 30 55 64 71 76 84 89 92 97 100 10 50 59 66 72 80 85 89 94 97 50 50 20 60 69 75 79 86 90 92 96 98 30 54 63 70 74 81 86 89 93 96 10 49 58 65 70 78 82 86 91 94 30 50 20 58 67 73 77 82 86 89 92 94 30 53 62 68 79 81 83 86 90 92 10 49 58 64 69 76 80 83 88 90 0 0 0 47 55 61 66 72 76 79 83 85 BZ-class 3 3 3 3 3 3 3 3 3 360 cone shaped detection pattern diameter at floor = 1 x height Maximum recommended detector mounting height 16m Catalogue Number DLOR % ULOR % LOR % Luminaire Lumens/Circuit Watt LNA449Z 93.1 2.9 96.0 77.2 LNAP449Z 89.2 2.8 92.0 73.9 LNA473Z 95.7 3.0 98.7 82.6 LNAP473Z 86.0 2.7 88.7 74.2 LNR449Z 93.1 2.9 96.0 77.2 LNRP449Z 89.4 2.8 92.2 74.1 LNR473Z 94.9 3.0 97.9 81.9 LNRP473Z 86.7 2.7 89.4 74.8 Integral Sensor Option Key performance features Advanced optical design offering class leading performance and full ECA compliance* across the range Improved Downward Light Output Ratio (DLOR) whilst maintaining the thermal optimisation of the T5 lamps offering greater usable light on the task area Individual lamp per reflector cell design, maximising optical efficiency Enhanced vertical illuminance from the all new rack optic reflectors Additional energy savings can be achieved using the integrated occupancy and daylight detector with DALI dimming control gear *To current ECA requirements >60 luminaire lumens per circuit watt 6
Catalogue Numbers Lamp Rating Optic Cat No Weight (kg) Emergency Weight (kg) Open luminaire 4x49W Wide Area Reflector LNA449Z 10.6 EBLNA449Z 11.2 4x73W Wide Area Reflector LNA473Z 10.6 EBLNA473Z 11.2 4x49W Rack Reflector LNR449Z 10.6 EBLNR449Z 11.2 4x73W Rack Reflector LNR473Z 10.6 EBLNR473Z 11.2 Enclosed luminaire (fitted with clear panel) 4x49W Wide Area Reflector LNAP449Z 12.9 EBLNAP449Z 14.2 4x73W Wide Area Reflector LNAP473Z 12.9 EBLNAP473Z 14.2 4x49W Rack Reflector LNRP449Z 12.9 EBLNRP449Z 14.2 4x73W Rack Reflector LNRP473Z 12.9 EBLNRP473Z 14.2 Open luminaire with switching High Level Detector 4x49W Wide Area Reflector IHPLNA449Z 11.5 EBIHPLNA449Z 12.1 4x73W Wide Area Reflector IHPLNA473Z 11.5 EBIHPLNA473Z 12.1 4x49W Rack Reflector IHPLNR449Z 11.5 EBIHPLNR449Z 12.1 4x73W Rack Reflector IHPLNR473Z 11.5 EBIHPLNR473Z 12.1 Enclosed luminaire with switching High Level Detector (fitted with clear panel) 4x49W Wide Area Reflector IHPLNAP449Z 13.8 EBIHPLNAP449Z 15.1 4x73W Wide Area Reflector IHPLNAP473Z 13.8 EBIHPLNAP473Z 15.1 4x49W Rack Reflector IHPLNRP449Z 13.8 EBIHPLNRP449Z 15.1 4x73W Rack Reflector IHPLNRP473Z 13.8 EBIHPLNRP473Z 15.1 For DALI dimming option, replace part number character Z with DD, e.g. LNA449Z becomes LNA449DD Primary product for an optimised energy efficient lighting solution Description Cat No Weight (kg) Wire guard LNWG 2.8 For further information contact our technical support and application department on 01302 303240 or email lighting@cooper-ls.com Wire guard fitted Panel secured with end bracket - secured by thumb wheels Wire guard fixing Hinge detail Panel slides out for ease of maintenance DIMMING CONTROLS 7
Head Office Cooper Lighting and Safety Ltd Wheatley Hall Road Doncaster South Yorkshire DN2 4NB Tel: 01302 321541 Fax: 01302 367155 Email: sales@cooper-ls.com Web: www.cooper-ls.com Middle East Office Cooper Middle East PO Box 30861 Suite 302 Building 49 Dubai Healthcare City Dubai United Arab Emirates Tel: + 971 4 427 2500 Fax: + 971 4 429 8521 Web: www.cooper-ls.com Cooper Industries Plc 5 Fitzwilliam Square Dublin 2 Ireland www.cooperindustries.com Awarded to: Cooper Industries (UK) Ltd CC1941