SDC Marks Best Sargent Arrow Corbin Russwin 7800 SELECTRICTM Locksets and Conversions SELECTRIC SELECTRIC TM PRO- Electrified Mortise Locksets TM Conversions - Mechanical Lock Electrification SELECTRIC TM Applications SELECTRIC TM Electrified Mortise Locksets are designed for the access control of openings in commercial, industrial and institutional facilities where code compliance, dependable operation and resistance to physical abuse is required, including: High-Rise Offices Hospitals Universities Museums Government Centers Airports Factories Optional cable and connectors Dorma Schlage Cal Royal Yale PDQ Falcon Building and Fire Life Safety Code Compliance SELECTRIC TM locksets ensure that the door stays latched even when unlocked, maintaining fire door integrity. SELECTRIC TM locksets comply with all national building and fire life safety code requirements for use on fire rated doors, including high rise stairwell and elevator lobby doors where the use of electric strikes and magnetic locks is prohibited. Security with Superior Aesthetics Available in field selectable failsafe and failsecure modes, functions and operating voltages, SELECTRIC TM electrified locksets provide a superior appearance compared to exposed and vulnerable electric strikes and magnetic locks, while eliminating the need for request-to-exit devices. Benefits Building and Fire Life Safety Code Compliance True full monitoring and REX capability Vandal resistance Lock brand choice and retrofit Field operation flexibility Reduced stocking requirements Increased function availability SDC full featured lockset with complete application flexibility for new construction or retrofit of major brand mechanical locksets New or retrofit application. Replaces most mechanical locks Field selectable mode; Failsafe or Failsecure Field selectable function Locked both sides or outside only Field selectable voltage, 12 or 24VDC Field selectable hand LH, RH, LHR, RHR Select trim brand. Order with SDC trim or less trim which may be supplied by others Key latch retraction SELECTRIC TM PRO Vandal Resistant Lever Handles Standard With SDC Brand Lockset When locked, the built-in clutch permits the handles to operate without retracting the latch, reducing potential for damage. Full Monitoring Capability optional Request-to-Exit, SPDT Door Position Status, SPDT Latched & Locked Status, SPDT SELECTRIC TM Conversions For new construction or replacement of major brand mechanical locksets, your distributor simply sends the new mechanical locks to SDC for UL approved electrification Schlage Corbin Russwin Best Yale Sargent Dorma Marks Cal Royal Arrow Falcon PDQ Field selectable mode; Failsafe or Failsecure Field selectable voltage,12 or 24VDC Field selectable handing and functions based on individual lock brand capabilities Key latch retraction *Full Monitoring Capability optional Request-to-Exit, SPDT Door Position Status, SPDT Latched & Locked Status, SPDT * Available with select brands PTH Power Transfer Hinge with 5ft Cable 10B Listed for 3hr Fire Rated Door Performance Specifications ANSI A156.25 Electrified Locks ANSI A156.13 Grade 1 ANSI A117.1 Accessibility Code California State Reference Code Electrically Operated Single Point Locks & Latches, 3hr A Label Fire Doors CSFM 3774-0324-104 MEA City of New York 678-80-SA ADA Compliant Patents Pending www.sdcsecurity.com E-mail: service@sdcsecurity.com ISO 9001 : 2000 FM 52705
Ordering Information Specify Source & Brand Specify Lever Trim Source codes indicate the origin, brand and model of the mechanical lockset. SDC brand lockset complete with SDC lever trim Available through SDC's shipquick program for shipment by the next business day. Consult your factory for applications where Schlage lever trim may be supplied by others, (POA). See standard features on page 1. Z SDC 7800 G Galaxy with rose E Eclipse with rose N Nova with rose Mechanical locks provided by others for factory electrification SDC distributors send your lock brand of choice to the factory for UL listed electrification. See standard features on page 1. A Falcon LM561 T Best 35HEW D Sargent 8201 U Dorma ML9050 I Corbin/Russwin ML2055 V Marks 5J N Arrow B12 W Cal Royal M8080 P Yale 8805 X PDQ MR148 S Schlage L9080 *Note: 2 locking hubs required for 7830/7832 Specify Function and Electrical Mode 7830 Locked both sides, failsafe. Field reversible to failsecure mode. 7850 Locked outside only, failsafe. Field reversible to failsecure mode. 7832 Locked both sides, failsecure. Field reversible to failsafe mode. 7852 Locked outside only, failsecure. Field reversible to failsafe mode. Specify Hand L Left hand LR Left hand reverse R Right hand RR Right hand reverse GE Galaxy with escutcheon Options EE Eclipse with escutcheon NE Nova with escutcheon Optional Outputs R Request-to-exit. Indicates inside lever operation for access control request-to-exit input, alarm shunt, remote annunciation or CCTV activation, SPDT 5 Amp @ 30VDC Available with locks A, D, I, N, P, S, T, U, S, V and Z only D S L Door position status output. Indicates door open and door closed. SPDT 5 Amp @ 30VDC. Available with locks Z and S only Latched & locked status output. Indicates door latched and locked and door unlocked. SPDT 5 Amp @ 30VDC Available with locks Z and S only Latchbolt status. Indicates door latched and unlatched status, SPDT 5Amp @ 30VDC Available with locks A, D, I, N, P, S, T, U and V only Consult factory for recent updates of option availability with any model Optional Cable and Connectors Specify Finish U 630 Dull Stainless Steel (standard) C 605 Bright Brass H 613 Oil Rubbed Bronze D 606 Dull Brass P 625 Bright Chrome F 611 Bright Bronze Q 626 Dull Chrome G 612 Dull Bronze S 629 Bright Stainless Steel CC1-5 CC3-5 5ft. Cable & connectors for locks without optional outputs 5ft. Cable & connectors for locks with optional outputs Optional Key Cylinders 1 required for 7850/7852 2 required for 7830/7832 SDC is not a licensee of, or affiliated or connected with ASSA/Abloy, Yale Security, Corbin-Russwin, Sargent Manufacturing Company, Ingorsol Rand, Schlage Lock Company, Best Lock Company, PDQ, Cal Royal, Marks USA, Dorma, Arrow Lock company, Falcon Lock Company, or any of their subsidiaries or affiliates. CYL-6KDQ CYL-6KAQ 6 pin, 1.125" keyed different, 626 Dull Chrome 6 pin, 1.125" keyed alike, 626 Dull Chrome
600 Power Suppy with Emergency Release To Fire Command Center 10B Listed for 3hr Fire Rated Door PTH Hinge with standard 5ft Cable 7800 Lockset SDC Z7800 Field Selectable Function Access Control PTH Power Transfer Hinge Features UL10B Listed for 3 Hr Fire Doors. If the hinge you are presently using does not bear the F mark, it is not listed for use with fire doors. 800,000 cycles. 8 times UL test criteria Wire Replacement Warranty Application Installed in the center hinge position of the door, PTH Power Transfer Hinges provide the concealed wires required between the door and the frame, for the purpose of powering and monitoring electric door hardware. Uses Include Electric Lock Power and Control Door and Lock Status Signaling Request-to-Exit Signaling Ordering Information Specify Model Locked from both sides: Unlocked by an access control, remote control or key from either side. Locked from outside only: Unlocked by an access control or key from the outside. Uninhibited egress at all times by turning the inside lever handle. PTH-4 PTH-10 Specify Finish Four conductor hinge, 28 Ga. 1-pair 1 Amp, 1-pair 250 ma 4.5" x 4.5" standard weight Ten conductor hinge, 30 Ga. 1-pair 1 Amp, 4-pair, 250 ma 4.5" x 4.5" standard weight Consult factory for 3 knuckle, special size, or heavy weight requirements. Electrical Specifications Dual Voltage: 600/300 ma @ 12/24VDC Mode: Field Reversible, Failsafe/Failsecure All base material steel Q 626 Dull Chrome (standard) C 605 Bright Brass P 625 Bright Chrome H 613 Oil Rubbed Bronze U 630 Dull Stainless Steel Mechanical Specifications Specify Options DPS Contact Door Thickness: 1.75" standard Door Preparation: ANSI A156.13 Latch Bolt: 0.75" anti-friction bolt with auxiliary deadlatch Backset: 2.75" Strike: 4.875" (standard) Key Override: 6 PIN, 1.125" Mortise cylinder with Schlage C keyway (optional) PTH hinge with door positions switch Optional door status switches are disguised as mounting screws. Laboratory tested, UL Listing is maintained when door status switches are specified. DPS Door Position Switch SPDT, 500 ma @ 30VDC
Door Core Drill Fixture Kit Features The SDC door core drill fixture provides the best method of wire preparation for fire rated or non-fire rated particle filled or solid wood doors to accommodate the installation of electrified locksets, exit devices and hinges while maintaining door integrity and rating Tested by ITS/ Warnock Hersey for field drilling of rated doors Installer may call for inspection of doors to be re-certified after drilling Allows for drilling from the hinge side without removing the door from the frame Will drill at 20 degrees from center, up or down, from the hinge to the lock prep on a 3-0 door Drills doors in 3 minutes Easy to use, no experience required Includes special 58 inch evacuator drill bit with custom tool room sharpened end High speed Delrin bushings ensure long tool life at high speed drilling with little or no noise. Your commercial customers will love the quiet operation in their offices 7000-DF 7000-DB Door Core Drill Fixture 5/16 Custom Replacement Drill bit 2005 Security Door Controls Printed in the U.S.A. LIT-E70 EntryCheck 07.05 P.O. Box 6219, Westlake Village, CA 91359-6219 3580 Willow Lane, Westlake Village, CA 91361-4921 (805) 494-0622 (800) 413-8783 Fax: (805) 494-8861 Email: service@sdcsecurity.com www.sdcsecurity.com
3580 Willow Lane, Westlake Village, CA 91361-4921 (805) 494-0622 (800) 413-8783 Fax: (805) 494-8861 www.sdcsecurity.com service@sdcsecurity.com SELECTRIC PRODUCT SUMMARY APPLICATION Code compliant SELECTRIC locksets stay latched even when unlocked, maintaining fire door integrity. This basic ability complies with national code requirements for up to 3-hour fire rated doors, including exit, elevator lobby and stairwell doors where electromagnetic locks and electric strikes may not be permitted. Unlike a *magnetic lock, the failsafe SELECTRIC 7850 function is never locked from the inside and permits uninhibited egress at all times by turning the inside manual lever, also eliminating reliance on secondary request-to-exit (REX) devices, such as motion detectors and other switching devices. When connected to the fire life safety command center, the lock releases immediately in an emergency, transforming a stairwell or elevator lobby door from a one-way exit into a two-way exit. This permits re-entry and eliminates the possibility of stairwell entrapment and potential exposure to life threatening smoke inhalation. Additionally, fire fighters are permitted uninhibited access to all floors during in an emergency, speeding life saving and fire extinguishing efforts. While the failsafe SELECTRIC is well suited for stairwell applications, it is important to remember that 75% of all electrified lockset installations are failsecure. The failsecure SELECTRIC lockset functions are ideal for interior high security applications, including entry control only and entry and egress control. For high profile installations requiring security with superior aesthetics, failsafe and failsecure SELECTRIC locks eliminate the need for exposed and vulnerable locking devices, such as electric strikes, magnetic locks and REX devices. Facility applications include: Commercial High-Rise Buildings, Industrial and Technology Centers, Health Care, Transportation, Government and Military Facilities, Museums and Universities. Door applications include: Office and work center doors, mantrap doors, stairwell doors, elevator lobby doors, and exit doors. CODE COMPLIANCE UBC, SBC, BOCA, IBC, IFC, NFPA, UFC, California Building Code, Chicago Building Code. UL, CSFM and MEA Listed. *MISAPPLICATION The use of electromagnetic locks is not recommended for stairwell doors for several reasons. (1) National codes have no provision for locking the interior side of stairwell doors at any time. (2) When a magnetic lock is energized the door is locked on the interior and exterior. (3) Egress ability relies upon the proper installation and reliability of a secondary switching device and/or relay (integrated or external), rather than the inherently safe manual lever egress operation of an electrified lockset. (4) Codes do not permit the use of a wall mounted exit switch for stairwell door egress. This requires both prior knowledge and two actions to achieve egress, as opposed to the single natural motion of lever rotation provided by electrified lockset. Electric strikes are not permissible on stairwell doors at any time. Failsafe electric strikes do not keep the door latched when unlocked, failing to maintain fire door integrity. Failsecure electric strikes are incapable of releasing during an emergency. Approval of these products by local inspectors may not qualify as code compliant and may be indicative of code misinterpretation. www.sdcsecurity.com E-mail: service@sdcsecurity.com ISO 9001 : 2000 FM 52705
www.sdcsecurity.com E-mail: service@sdcsecurity.com WHATS NEW SELECTRIC PRO The SELECTRIC PRO series features an SDC manufactured ANSI Grade 1 Heavy Duty lockset that retrofits most mechanical mortise lock brands and incorporates a proprietary clutch for lever vandal resistance. Also new and proprietary to SDC, ALL of the SELECTRIC PRO lockset features are field selectable, including selectable failsafe and failsecure modes, handing, voltages and functions - locked outside only or locked on both sides. Options include door status, latched and locked status and REX outputs. Two mounting holes may be required for SDC trim when retrofitting some competitive brand door preps, consult factory. Specify SELECTRIC PRO for new or retrofit applications that require a full-featured lockset, application versatility, vandal resistance and flexibility for changing facility requirements. SELECTRIC CONVERSION The SELECTRIC CONVERSION series permits specification or direct replacement of competitive brand mechanical locksets. Select the lock brand of your choice and your distributor simply sends it to the SDC factory for electrification. SELECTRIC CONVERSION include Schlage, Corbin Russwin, Yale, Best, Sargent, Arrow, Falcon and more. And, SDC s ShipQUICK program ensures immediate shipment of select brands prior to arrival of your distributors replacement locks. All SELECTRIC CONVERSION incorporate field selectable failsafe and failsecure modes and voltages. Function and handing selectability is based on individual brand capabilities. Specify SELECTRIC CONVERSION for new applications where another brand lockset is preferred or retrofit applications where matching of existing locksets is required. MARKET CHAIN BENEFITS Distributor: Stocking requirements reduced Benefits: The ability to fulfill diverse application needs is increased Installer: Benefits: Full feature selectability transforms locks to accommodate several different applications Stock availability and lock flexibility reduces or eliminates delivery lead-time End User: Benefits: Lock brand, mode and function flexibility True full monitoring and REX capability Choose preferred lockset or match lockset brand with same brand electrified lockset, or Retrofit existing mechanical lockset with fully featured vandal resistant SDC lock High security suitability with full monitoring and REX capabilities Maintain compatibility with existing key system 2005 Security Door Controls Printed in the U.S.A. LIT-Selectric App Summary 09.05 3580 Willow Lane, Westlake Village, CA 91361-4921 (805) 494-0622 (800) 413-8783 Fax: (805) 494-8861 www.sdcsecurity.com service@sdcsecurity.com