CONTENTS STREET LIGHT E1ST SERIES E2ST SERIES 6 7 DOWNLIGHT 4 & 6 RETROFIT DOWNLIGHT KITS 8 RETROFIT DOWNLIGHT KITS 24 25 AREA LIGHT E1SB SERIES E3SB SERIES 8 9 FLUSHMOUNT ELFM & E2FMA MULTI-FAMILY SERIES ARCHITECTURAL SERIES 26 27 WALLPACK E2WPA SERIES E1WPB SERIES DECORATIVE OUTDOOR E1WPL SERIES WALL MOUNT E2WPC & E1PL SERIES UTILITY AREA LIGHT E1ALB SERIES CANOPY LIGHT E1CPC SERIES 10 11 12 13 14 15 WRAP LIGHT LINEAR WRAP LIGHT SERIES VAPOR TIGHT ELYVT SERIES STRIP LIGHT E2SLA & E3SLA SERIES HEALTHCARE FIXTURE ELYBL SERIES T8 LAMP T8 LED DIRECT PLUG-IN TUBE LAMP T8 LED BALLAST BYPASS RETROFIT TUBE LAMP 28 29 30 31 32 33 HIGH BAY E1HBD SERIES - LINEAR E2HBA SERIES - PRO-CLASSICAL E1HBC SERIES - UFO E1HBA SERIES - PENDANT VOLUMETRIC PANEL ELYTD4 SERIES ELYRTD SERIES - RETROFIT E2T SERIES FLAT PANEL E1PL SERIES 16 17 18 19 20 21 22 23 CORN COB LAMP E1CC SERIES E2CC SERIES A19 BULB ECO OMNI SPECIALTY BULB BR SERIES PAR SERIES GLOBE MR-16 BULB FILAMENT BULB 34 35 36 37 38 39 40 41 42
MANUFACTURING As a manufacturer, Energetic Lighting develops and designs products in-house, allowing us to oversee not only the final product but also all steps during production. We strive to maintain a balance between quality and cost, which ultimately translates to value for the customer. A product is not only the sum of its physical components, but just as important is the intangible process of design and assembly. Our efforts are not only put into the engineering of the final product but also the efficiency of the build process and component tooling, because a lower final cost does not need to come from lower quality components. The Energetic Lighting mission is to be the leading provider of sustainable and innovative lighting products. We continually bring new products to the lighting market combining experience, R&D, and technology. This enables our Distributors to sell and facilitate Contractor and ESCO partner installations and maximize energy savings for the end users. Energetic is committed to bringing its customers leading edge, quality products at reasonable prices with excellent customer service. Energetic Lighting, as a leading manufacturer and developer of energy efficient lighting products, maintains more than two million square feet of manufacturing capability globally. We produce lighting products for many of the largest lighting companies in the world. Since 2001, Energetic Lighting s corporate office and main distribution center for North America are based in Chino, California with satellite warehouses in Georgia and Texas. Q U A L I T Y In today s lighting market, price reduction seems to be the target of every transaction taking place, and while price is very important it must never overshadow quality. Energetic Lighting prioritizes quality control down to each component and throughout the entire manufacturing process. Reducing cost where needed, but never at a compromise to quality. The longevity of a company and brand cannot be built on a foundation based only on low cost, it is the quality of the product that fosters the growth of trust between manufacturer and consumer. Energetic Lighting will continue to remain competitive in this market while maintaining this perception. 4 5
E1ST Series E2ST Series Precision optics Tool-less bottom access panel Photocontrol NEMA receptacle Precision optics Aerodynamic profile Photocell sensor Bubble level STREET LIGHT ROAD LIGHT Energetic Lighting s E1ST series LED street lights offer an ideal solution to replace the many inefficient road lights in use today. LEDs are capped by precision molded optical elements to provide an evenly diffused and controlled light profile ensuring safe driving environment for the road below, with several NEMA beam patterns available. With total outputs up to 19,670 lumens while only operating at 50W to 150W significantly reduces energy usage. The outer heavy duty sand-cast aluminum housing provides efficient heat management as well as weight reduction and aerodynamic profiling. These street lights will provide worry-free reliable operation for many years. Fully sealed assembly Updated and efficient design Suitable for wet location use Mounting adapters available Available dusk to dawn sensor Roadways Commercial locations Outdoor overhead The Energetic E2ST Series DOT styled Roadway fixture reflects the traditional cobra head designs of legacy lighting, but delivers leading edge 135-140 LM/W performance. Offered from 40W to 150W, this series covers replacement of HID applications ranging from 100W MH/HPS to 400W MH/HPS. With optic options from Type II-S thru Type 5-H, any roadway configuration can easily be supported. Classic DOT features include adjustable tenon pitch positioning, bottom side control gear access, tool-less access covers, ANSI wattage plates, NEMA receptacles, SPD up to 20KV is available; and newer features such as 0-10V dimming occupancy sensing are available. Fully sealed assembly Tool-less bottom facing access Suitable for wet location use Mast Arm mounting friendly Available dusk to dawn sensor 0-10 dimming Roadways Commercial locations Outdoor overhead 6 7
E1SB Series E3SB Series Durable steel housing Aerodynamic profile Dusk-to-Dawn NEMA sensor Dusk-to-Dawn NEMA sensor SHOEBOX AREA LIGHT Energetic Lighting s E1SB series LED commercial shoebox area light fixture provides a solution for parking lot and open area applications. Available in 90W, 120W, 150W, and 240W models, designed to replace traditional 250W to 1000W equivalent HID shoebox fixtures. Mounting is quick and simple with a standard round slip fitter setup. An integrated dusk-to-dawn photocell recepticle ( L models below) automatically turns the fixture on/off relative to ambient light when paired to NEMA 3-pin photocontrol. Constructed with a heavy duty steel body with robust gaskets and seals to prevent moisture and insect ingress. Each fixture is rated for a minimum L70 of 50,000 hours with a dependable build quality that will operate hassle-free for many years. Accessories - Mounting arm options Full cutoff light profile Multiple mounting options Suitable for wet location use Additional optic types upon request Matte brown color finish Commercial locations Parking lots Auto dealership lighting General area lighting The E3SB series area light from Energetic is a thoughtful recreation of the classic shoebox area light fixture, combined with the best of leading LED technology. The fixture footprint gives that classic look, while the slim tapered, self-cleaning profile suggests exceptional performance. The tested efficacy of 140 LM/W is offered across the family wattages from 100W through 350W. This makes the E3SB series ideal for replacing legacy fixtures from 250W to 1000W MH. Options include multiple mounting configurations, NEMA PC receptacle, occupancy sensing, and Type II, III, and V optics. Other key features include: Bottom side access door, large area heat sinking above arrays, single panel optics, standard SPD of 6KV, and low EPA ratings. Accessories - Mounting arm options Full cutoff light profile Ground facing access door Suitable for wet location use Multiple optic variations available Matte brown TGIC polyester color finish 0-10 dimming Commercial locations Parking lots Site and street lighting General area lighting E1SB-A1 E1SB-ARM E1SB-SVL Mounting adapters E3SB-ARM E3SB-A1 E3SB-SVL 8 9
E2WPA Series E1WPB Series Side and bottom conduit access Dusk-to-Dawn NEMA sensor Durable steel housing WALLPACK WALLPACK Energetic Lighting s E2WPA series LED commercial wall pack fixtures provide a quick and easy solution for warehouse and industrial applications. Available in 36W, 60W and 90W variants, designed to replace traditional 100W-250W equivalent HID wall pack fixtures. The standard design looks and feels just like traditional HID wall packs, but without any of the high wattage heat and maintenance. An integrated dusk-to-dawn photocell sensor automatically turns the fixture on/off relative to ambient light. Constructed out of heavy duty ADC12 die-cast aluminum with robust gaskets and seals to prevent moisture and insect ingress. Each fixture is rated for a minimum L70 of 50,000 hours with a dependable design that will operate hassle-free for many years. Borosilicate glass diffusers Classic design Integrated dusk-to-dawn sensor Suitable for wet location use Dimmable with 0-10v systems (36W and 60W) Traditional shell provides an easy 1 for 1 replacement on existing fixtures TGIC polyester powder coat matte brown color finish Commercial locations Warehouse Energetic Lighting s E1WPB series LED commercial wall pack series provides a solution for full cut off applications where prevention of undesired uplight needs to be addressed. Available in 60W, 90W, and 125W variations, and is designed to replace up to a 400W HID traditional wattage fixture. Mounting is quick and simple when combined with typical j-box mounting. Constructed of heavy gauge steel, robust gasketing, and seals. This series is rated for L70 50,000+ hours, and many years of hassle free operation. Classic architectural design Integrated dusk-to-dawn photocontrol TGIC polyester powder coat finish Apartment complexes Condominium units Barrack & living 10 11
E1WPL Series E2WPC & E1PL Series Classic illumination Dusk-to-Dawn photocell sensor DECORATIVE OUTDOOR Dusk-to-Dawn photocell sensor E2WPC E1PL9.5 Dusk-to-Dawn photocell sensor WALL MOUNT Energetic Lighting s E1WPL series LED Multi-family, apartment and ESCO wall pack fixture provide a solution for wall mount applications where narrow aisle, and egress tightness needs to be considered. Available in a nominal 13W configuration, with black and white finish variations, this series designed to replace up to traditional 75w equivalent incandescent fixtures. Mounting is quick and simple with a standard junction box. Standard version includes integral Dusk to Dawn photocontrol. This series is constructed out of finshed sheet steel back plate and ADC12 die-cast body. Integrated dusk-to-dawn sensor Suitable for wet location use Traditional shell provides an easy 1 for 1 replacement on existing fixtures Matte brown color finish Commercial locations Warehouse Apartment lighting Energetic Lighting s E2WPC series is the creative contemporary redesign of the wall mounted security light. Ideal for use where LED commercial wall pack fixtures provide a quick and easy solution for multi-family, residential, and apartment applications. Available in 10W and 20W, designed to replace traditional 100W equivalent incandescent wall pack fixtures. An integrated dusk-to-dawn photocell s e n s o r a u t o m a t i c a l l y t u r n s t h e fi x t u r e o n / o f f r e l a t i v e t o a m b i e n t l i g h t. The E1PL series is a modern take of the classic jelly jar. Its clean simple exterior offers a universal complement to any building exterior. Producing an average of 850 Lumens this fixture is a replacement for older 13w CFL, and up to 60W incandescent luminaires. The Dusk to Dawn photocontrol is ingenuously integrated into the mounting body. Integrated dusk-to-dawn sensor Suitable for wet location use Various color finishes 0-10 dimming Commercial canopy locations Covered walkways 12 13
E1ALB Series E1CPC Series Wide-pattern diffuser Wide-pattern diffuser UTILITY AREA LIGHT Dusk-to-Dawn NEMA sensor CANOPY LIGHT Energetic Lighting s E1ALB LED rural street/area Lights are the ideal solution to replace many inefficient legacy Barn lights in use today. The E1ALB features LEDs that are protected by a precision molded optical element. To provide an evenly diffused and controlled light distribution, a classic serrated diffuser broadcasts an even Type 5 beam pattern. Where needed the diffuser can be removed for enahanced volumetric distribution. A total output of up to 5500 lumens is possible selecting from either the 30W or 50W model. The outer cast aluminum housing provides efficient heat management as well as weight reduction and aerodynamic profiling. These rural street light/ Area Lights will provide worry-free reliable operation for many years. Fully sealed assembly 175W-250W HID replacement Suitable for wet location use Post mount adapter Available dusk dawn sensor Access streets and lanes Storage areas and work yards Outdoor overhead Energetic Lighting s E1CPC series LED commercial low-profile canopy fixture provides a quick and versatile solution for hallways, garages, overhangs, gas stations, and other outdoor applications. The low-profile height allows for efficient packaging and unobtrusive surface installation. With input wattages of 44W and 65W, this fixture is designed to replace traditional 70W to 150W PSMH equivalent canopy fixtures. Fully sealed construction allows for wet location installation where direct contact with water is necessary. Light output is dimmable through standard 0-10v system control leads. Constructed of heavy duty cast aluminum with an integrated thermally efficient heatsink profile, each fixture is rated for a minimum L70 of 50,000 hours. Optional microwave occupancy sensor Small footprint design 0-10v dimming Suitable for wet location use Easy tip in installation, and security lock bolt included Lightweight and compact profile Commercial locations Warehouse Gas stations 14 15
E1HBD Series E2HBA Series 1/2 trade-sized knockouts Occupancy sensor Chain mounting Aluminum diffuser option HIGH BAY - LINEAR HIGH BAY - PRO CLASSICAL Energetic Lighting s E1HBD series LED value line up commercial 2-4ft linear highbay fixture provides a quick and easy solution for warehouse and industrial applications. The linear profile allows for a one-for-one substitution to existing linear fluorescent highbay fixtures where the original chain suspension hardware can transfer directly over for ease of install. Available in 100W, 120W, and 200W variants, designed to replace traditional 250W-400W T8 fluorescent equivalent highbay fixtures. Constructed out of extruded aluminum as an integrated thermally efficient heatsink profile, each fixture is rated for a minimum L70 of 50,000 hours. Standard polycarbonate diffuser provides reduced glare and even illumination. Clean extruded aluminum look Driver and arrays isolated for heat control 1/2 knockouts at both ends Commercial locations Warehouse The Energetic Classic High Bay light (E2HBA) features brilliant optics and is engineered for lasting value. Designed in the traditional monopoint cable hung style, and offered with acrylic diffuser or optional aluminum shade, mounting heights up to 40 are supported. This full featured family is offered in 5 wattages ranging from 80W to 250W, in an industry leading 140 lumen per watt output. Battery back up, conical lenses, and occupancy sensing options are also available. These higher performances are maintained by placing components to avoid heat build up, and optimize the conduction and convection engineered in. One man Installation is facilitated by the innovative splice open features of the integral hook/wiring compartment design. This series is truly value engineered for both performance and appearance suited for any retail, commercial, or industrial high bay applications. Available conical lens cover 0-10v dimming Sensor and diffuser options available Commercial and retail locations Warehouse Overhead gymnasium and auditorium lighting 16 17
E1HBC Series E1HBA Series Efficient heat management HIGH BAY - UFO Eyelet mounting adapter HIGH BAY - PENDANT Energetic Lighting s E1HBC series LED commercial low-profile highbay fixture provides a quick and easy solution for warehouse and industrial applications. The low-profile height allows for efficient packaging, as well as accomodates applications where a low hanging fixture is desirable. With input wattages of 120W, 150W, and 240W, this fixture is designed to replace traditional 250W to 400W HID equivalent highbay fixtures. Fully sealed construction allows for wet location installation where direct contact with water is necessary. Light output is dimmable through standard 0-10v system control leads. Constructed out of heavy duty cast aluminum with an integrated thermally efficient heatsink profile, each fixture is rated for a minimum L70 of 50,000 hours. Die cast body and polycarbonate lens 0-10v dimming Suitable for wet location use Lightweight and compact profile Commercial locations Warehouse Energetic Lighting s E1HBA series LED value engineered pendant commercial highbay fixture provides a quick and easy solution for warehouse and industrial applications. Available in 100W, 150W, and 200W variants, designed to replace traditional 250W-400W HID equivalent highbay fixtures. Light output is dimmable through standard 0-10v system control leads. Constructed out of heavy duty steel and thermally efficient aluminum heatsink profile, each fixture is rated for a minimum L70 of 50,000 hours. Pendant form factor 0-10v dimming Lightweight and compact profile Commercial locations Warehouse 18 19
ELYTD4 Series ELYRTD Series Secure swing-down hinges 0-10 dimming Gap cover trims included VOLUMETRIC LAY-IN VOLUMETRIC RETROFIT Energetic Lighting s LED recessed troffer fixture delivers a superior replacement option for traditional fluorescent tube recessed troffer fixtures. Standard 2x2, 1x4, and 2x4 troffer sizes available to suit any office application and layout. This troffer light can be used for general office lighting, classroom lighting, and moderate task lighting without any of the maintenance issues associated with fluorescent tubes. Installation is quick and simple when mounting into standard 15/16 T-grid suspended ceiling systems. Optional Emergency back up and Occupancy sensing models are avaiable. Constructed with a durable steel housing body and LED lifetime rating of at least 50,000 hours, this troffer is designed for many years of reliable operation. Accessories - Surface-mount kits Ribbed diffuser for even illumination Steel body construction Optional integrated occupancy sensor available Easy and secure seismic installation 0-10V dimming Office lighting Limited space mounting locations Energetic Lighting s ELYRTD3 and ELYRTD4 recess troffer retrofit kits simplify the conversion from existing fluorescent 2x2 and 2x4 fixtures into energy efficient, long life LED fixtures. The innovative Energetic design facilitates room side installation, thus avoiding the dirt, debris and heat of above plenum retrofits. Fully dimmable with standard 0-10V dimming systems, and durable ribbed optic diffuser generate glare-free illumination. The high-efficacy LED s are rated for L70 of 50,000 hours. Rugged commercial grade steel construction, and rated for use in IC situated legacy locations, this series is the go-to conversion system contractors ask for. Uses existing troffer fixture housing Room-side access complete install Plenum access not required Emergency backup lighting option available /Type IC Office and commercial lighting Architectural styled lighting Limited space mounting locations General classroom lighting E1T1-SMK E1T2-SMK E1T4-SMK 20 21
E2T Series E1PL Series 0-10 dimming 0-10 dimming VOLUMETRIC LAY-IN FLAT PANEL Energetic Lighting s LED recessed troffer fixture provides for an ideal replacement option for traditional fluorescent tube recessed troffer fixtures. Standard 1x4, 2x2, and 2x4 troffer sizes available to suit any office application and layout. This troffer light can be used for general office lighting, providing suitable light without any of the maintenance issues associated with fluorescent tubes. Installation is quick and simple when mounting into standard T-grid suspended ceiling systems. Light output is dimmable with 0-10v systems. Constructed with a durable steel housing body and LED lifetime rating of at least 50,000 hours, this troffer is designed for many years of reliable operation. Accessories - Surface-mount kits Dimmable with 0-10v systems Architectural decor Ambient room lighting Energetic Lighting s LED flat panel light fixture provides an attractive skylight appearance applications using Light Guide Technology. Standard 1x4, 2x2, and 2x4 drop ceiling sizes available to suit any office application and layout. This panel light can be used for office, classroom, conference room, or other general lighting applications, providing light without any of the maintenance issues associated with fluorescent tubes. Installation is quick and simple when mounting into standard drop-in T-grid suspended ceiling systems. Emergency Back Up options are available. Anchor hooks at each corner are also provided for suspended cable mounting as well. Constructed with aluminum framed body and LED lifetime rating of at least 50,000 hours. Accessories - Surface-mount kits Standard T-Grid drop ceiling installation Dimmable with 0-10v systems Architectural decor Ambient room lighting E1T1-SMK E1T2-SMK E1T4-SMK Order #: 60005 60006 60009 60010 60007 60008 Model: E2T2A36-840 E2T2A36-850 E2T1A36-840 E2T1A36-850 E2T4A40-840 E2T4A40-850 Configuration: 2x2 2x2 1x4 1x4 2x4 2x4 Lumen Output: 4485 lm 4530 lm 4543 lm 4697 lm 5111 lm 5141 lm Lum. Efficacy: 124 lm/w 126 lm/w 126 lm/w 130 lm/w 131 lm/w 132 lm/w Beam Pattern: 110 110 110 110 110 110 Input Power: 36 W 36 W 36 W 36 W 39 W 39 W Input Voltage: 120-277 Vac 120-277 Vac 120-277 Vac 120-277 Vac 120-277 Vac 120-277 Vac Power Factor: 0.91 0.91 0.91 0.91 0.92 0.92 THD: 10 % 10 % 9 % 9 % 9 % 9 % CCT: 4000 K 5000 K 4000 K 5000 K 4000 K 5000 K CRI: 85 86 84 86 85 86 Lifetime: 50000 hours 50000 hours 50000 hours 50000 hours 50000 hours 50000 hours Warranty: 5 Years 5 Years 5 Years 5 Years 5 Years 5 Years Dimmability: (0-10v) (0-10v) (0-10v) (0-10v) (0-10v) (0-10v) Op. Temp: -9 F to 104 F -9 F to 104 F -9 F to 104 F -9 F to 104 F -9 F to 104 F -9 F to 104 F Environment: Damp Rated Damp Rated Damp Rated Damp Rated Damp Rated Damp Rated Weight: 9 lbs 9 lbs 10 lbs 10 lbs 15 lbs 15 lbs Certifications: DLC Standard DLC Standard DLC Standard DLC Standard DLC Standard DLC Standard Dimensions: 23.8"x23.8"x3.9" 23.8"x23.8"x3.9" 47.8"x11.8"x3.9" 47.8"x11.8"x3.9" 47.8"x23.8"x3.9" 47.8"x23.8"x3.9" 22 23 E1T1-SMK E1T2-SMK E1T4-SMK
4 & 6 Retrofit Downlight Kits 8 Retrofit Downlight Kits Seamless integration 0-10 dimming 4 E2DL DOWNLIGHT 6 E2DL E2DLB E26 adapter with standard disconnect 1/2 trade-sized flexible metal conduit lead DOWNLIGHT Energetic Lighting s E2DL09D4, E2DL11D6, E2DLB, and E2DL18D6 series of LED downlight retrofit kits provides an elegant solution for converting existing recessed cans into LED fixtures. Available in 4-inch and 6-inch can sizes operating at 8.5-watt, 10.5-watt, and 18-watt versions, with a beam angle of 90, and dimmable down to 10%. An improved slip-in friction fit mounting clip for the 6-inch model prevents the clips from being damaged during removal from the downlight housing. Comprising of a durable die-cast aluminum construction and a LED lifetime rating of 36,000 (18W models) or 50,000 hours, this robust downlight is designed for many years of reliable operation. Easy Fit clips Elegant and efficient design Suitable for use in Type-IC and Non-IC recessed can fixtures Die cast body Dimmable Architectural decor Overhead accent lighting Spot area lighting Energetic Lighting s E1DL22D8 series of LED downlight retrofit kits provides a simple and elegant solution for converting existing 8 inch recessed cans into LED fixtures. Energy efficient at 22 watts while producing up to 1800 lumens with a beam angle of 100. Two spring mounting clips provide a secure and simple installation into any existing 8-inch downlight. Rated for 120-277V universal voltage and suitable for 0-10v dimming systems, this downlight kit is versatile enough for any installation location. Comprising of a durable diecast aluminum construction and a LED lifetime rating of at least 50,000 hours, this robust downlight is designed for many years of reliable operation. Commercial voltages Elegant and efficient design 0-10V dimming at all voltages Trade size 1/2 flexible metal conduit input lead Architectural decor Overhead accent lighting Spot area lighting 24 25
ELFM & E2FMA Multi-Family Series Architectural Series Smooth diffusion light profile Classic style E2FMB16-840 FLUSHMOUNT Compact integrated driver ELFM-13RGS-BN E2FMC15-840 FLUSHMOUNT Energetic Lighting s ELFM and E2FMA series of LED round flushmount fixtures are designed to emulate the look and feel of traditional circline fluorescent tube flushmount fixtures, but operate at a significantly lower wattage. Fixtures are available in multiple diameter options, 9, 13, 15,and 19, making the choice easy for any type of application. Installation is quick and simple when mounting into standard ceiling junction boxes, and may be installed on circuits with standard wall dimmers. Constructed with a durable steel housing body and LED lifetime rating of at least 50,000 hours, this rugged flushmount is designed for many years of reliable operation. Tool-less diffuser attachment Minimalistic and efficient design Triac dimmable to 10% output Multi-family and apartments Overhead & hallway lighting Ambient room lighting Energetic Lighting s ELFM-13RGS-BN, E2FMB16-830 LED, E2FMC15-840 flushmount fixtures are designed to emulate the look and feel of traditional circline fluorescent tube flushmount fixtures, but operate at a significantly lower wattage. Installation is quick and simple when mounting into standard ceiling junction boxes, and may be installed on circuits with standard wall dimmers. Constructed with a durable steel housing body and LED lifetime rating of at least 50,000 hours, this rugged flushmount is designed for many years of reliable operation. Durable white polymer diffuser Brushed stainless steel accent design Triac dimmable Architectural decor Ambient room lighting 26 27
Linear Wrap Light Series ELYVT Series Wide-pattern diffuser Tool-less access latches ELYWL2 E2WR40D-840 3/8 Liquid-tight conduit entry Second conduit opening WRAP LIGHT VAPOR TIGHT Energetic Lighting s E2WR and ELYWL series LED surface mount wraps showcase a soft fixture form factor in their 2-ft or 4-ft lengths. These versatile lights can be used for general room lighting, or as a functional work area lights with an all white or silver accent appearance. Installation is quick and simple when mounting into standard ceiling junction boxes. Constructed with a durable steel housing body and LED lifetime rating of at least 50,000 hours, these rugged wrap lights are designed for many years of reliable operation. Different appearance options Reduced glare translucent diffusers 0-10V dimming on E2WR model Architectural decor Ambient room lighting Energetic Lighting s LED Vapor Tight fixture radiused profile with a nominal lumen output of 5100 lumens, while drawing only 40 watts of power. The fully sealed housing can be installed in high humidity areas and locations that receive direct water exposure. Both fixture body and diffuser are constructed of durable polymers for impact resistance. This versatile light can be used for general functional lighting, where its rugged construction and long LED lifetime will provide years of maintenance free service. Installation is quick and simple with standard trade size conduit openings at both ends, and quick mounting adapters. Complete gasketing Ribbed translucent diffuser Suitable for wet location use Impact resistant applications Wet environments Parking and garage lighting 28 29
E2SLA & E3SLA Series ELYBL Series 0-10 dimming Pull switches with adjacent indicator light STRIP LIGHT Tool-less entry Independently controlled up/down light HEALTHCARE BED FIXTURE Energetic Lighting s LED Strip Light family of fixtures are desined to emulate the look of traditional fluorescent T8 tube lights. This series offers variations from 10W up to 40W outputs, and single and double strip appearances. 0-10V dimming and 120-277VAC operation are featured. Designed for series installation, the easy end connection design facilitates any install. Combining a durable steel housing, rugged polymer diffuser, and an L70 lifetime of 50,000 hours will provide many years of dependable and worry free use. 0-10v dimmable Minimalistic and efficient design Tool-less wire compartment entry Linkable ends with included adapter Architectural decor Limited space mounting locations Energetic Lighting s LED Bed Light emulates the traditional bi-directional fluorescent fixtures used throughout hospitals and the general medical/nursing industry. Two diffuser panels direct light down, up, or in both directions; 44W (4,500 lumens) downlight, 22W (2,250 lumens) uplight, or 66W (6,750 lumens) altogether. A convenient switchable indicator nightlight is provided next to the pull chain switches, which can be extended to customize the chain length and reach. A 50,000 lifehour rating backed with a 5 year warranty will ensure that this fixture will continue to run for many years of dependable service. Selectable Bi-directional up/down lights Nightlight indicator light adjacent to pull switch Minimalistic and efficient design Patient bed overhead lighting Bi-directional area lighting 30 31
T8 LED Direct Plug-In Tube Lamp T8 LED Ballast Bypass Retrofit Tube Lamp E3T8 E3T8G E4T8 ELYT8G2 E3T8C E3T8CG T8 LAMP T8 LAMP Energetic Lighting s E3T8CG series of LED Direct Plug-in T8 tubes are designed to emulate the look and feel of traditional 4-foot 32 watt fluorescent T8 tubes, while maintaining the ease of a plug-in installation. A durable coated glass diffuser make this tube virutally indistinguishable from traditional fluorescent tubes. No fixture retrofit wiring is needed since these bulbs will run off the existing fluorescent ballast. Compatible with most electronic ballasts, including pulse start, rapid start, and instant start configurations. Rated with an L70 lifetime of at least 50,000 hours, this rugged tube lamp is designed for many years of reliable maintenance-free operation. Dual ended circuit design for non-shunted sockets Works just like a traditional fluorescent T8 tube Suitable for totally enclosed fixtures Durable coated glass tube lens Energetic Lighting s E3T8G(2) series of LED ballast bypass T8 tubes are designed to emulate the look and feel of traditional 2-foot and 4-foot fluorescent T8 tubes. The lens is made of a durable glass or polycarbonate materials, both engineered for maximum light diffusion as well as reliability. Simply bypass the ballast in the existing fixture is all it takes to convert existing fluorescent fixtures into long life, energy efficient LED units. Rated with an L70 lifetime of at least 50,000 hours, these rugged tube lamps are designed for many years of maintenance-free operation. Single live end shunted socket design Simple and efficient design Uniform illumination light profile Suitable for totally enclosed installation Simple ballast bypassing steps on existing fixtures Durable glass or polycarbonate diffuser lens Office lighting Limited space mounting locations Office lighting Limited space mounting locations Damp location Installation 32 33
E1CC Series E2CC Series 360 degree omni directional output 360 degree omni directional output CORN COB LAMP CORN COB LAMP Energetic Lighting s E1CC series Corn Cob lamps provide an easy solution for upgrading existing HID fixtures to energy-saving LED fixtures. Available in E26 (wattage dependant)or E39 base type to accomodate almost any type of fixture with a mogul lamp base. These by-pass lamps run independent from any ballasts and are rated for an L70 lifetime of 50,000 hours, providing a reliable light source to any existing fixture, no matter the age. Suitable for fully enclosed fixture types, where applications include wall packs, shoeboxes, flood lights, low bays, and just about any reflector-type fixture. Installation Requirements Fixture ballast must be bypassed Input supply voltage range: 120-277Vac E39 screwshell base @ 36W Horizontal or vertical lamp orientation (full 360 illuminance) Simple and efficient design Full 360 illumination Warehouse and commercial lighting Industrial lighting Suitable for fully enclosed installation Wall Pack, Flood Light, Highbay, and Shoebox fixtures Energetic Lighting s E2CC series Corn Cob lamps provide an easy solution for upgrading existing HID fixtures to energy-saving LED fixtures. Available in E26 (wattage dependent) or E39 base type to accomodate almost any type of fixture with a mogul lamp base. These by-pass lamps run independent from any ballasts and are rated for an L70 lifetime of 50,000 hours, providing a reliable light source to any existing fixture, no matter the age. Suitable for fully enclosed fixture types, where applications include wall packs, shoeboxes, flood lights, low bays, and just about any reflector-type fixture. Installation Requirements Fixture ballast must be bypassed Input supply voltage range: 120-277Vac E39 screwshell base @ 36W Horizontal or vertical lamp orientation (full 360 illuminance) Horizontal or vertical orientation Simple and efficient design Full 360 illumination Office lighting Limited space mounting locations 34 35
ECO OMNI 220º~240º Beam angle 220º~240º Beam angle 230º-310º A19 BULB A19 BULB Energetic Lighting s A19 and A21 Omni LED bulbs provide a one for one replacement for all incandescent Omnidirectional lamp needs. An energy efficient integrated LED driver operating at less than 1/6th of its equivalent incandescent lamp wattage. This lamp is suitable for damp location installations, on/off uses, and supplies a reliable light source for at least 10,000 hours while backed by a 2 year warranty. Non-dimmable Elegant and efficient design Uniform illumination light profile Dimmable Damp location installation Desk lamps 360 fixture styles Energetic Lighting s A19 and A21 Omni LED bulbs provide a one for one replacement for all incandescent Omnidirectional lamp needs. An energy efficient integrated LED driver operating at less than 1/6th of its equivalent incandescent lamp wattage. This lamp is suitable for damp location installations, dimmable, and supplies a reliable light source for at least 15,000 hours while backed by a 5 year warranty. Dimmable to 10% Elegant and efficient design Uniform illumination light profile General Lighting Damp location Installation Desk lamps 360 fixture styles 36 37
BR Series PAR 20, PAR 30 & PAR 38 Series Classic shape Traditional lamp profile Precise beam angle profile BR BULB PAR BULB Energetic Lighting offers a complete line of LED R and BR style bulbs with formats for R20, BR30, and BR40 profiles, providing an environmentally friendly alternative to traditional incandescent bulbs. These energy efficient LED bulbs operate at less than 1/6th the wattage of its incandescent equivalent, while delivering the same light output. These bulbs are suitable for damp location installation and fully dimmable down to 10%. This bulb will provide a reliable light source for at least 25,000 hours while being backed by a 5 year warranty. Elegant and efficient design 120 beam spread light profile Damp location installation Ambient lighting Energetic Lighting s PAR profile LED bulbs provide a superior replacement for all incandescent PAR lamp aplications. An energy efficient integrated LED driver operating at about 1/6th the equivalent wattage while delivering the same lumen output. PAR30 bulbs are available in both short and long neck variants. The Par38 bulb is suitable for wet location installations where applications such as outdoor security lights are required. Dimmable down to 10%, and supplying a reliable light source for at least 25,000 hours backed by a 5 year warranty, these bulbs will be dependable for many years of service. Elegant and efficient design 40 beam spread light profile Dimmable to 10% General and ambient lighting Damp location installation (Wet location for Par38) 38 39
G25 & G16.5 GU10 & GU5.3 MR16 Beam angle 35 GLOBE GU10 GU5.3 Efficient heat management MR-16 BULB Energetic Lighting s G16.5/G25 Globe LED bulbs provide a superior replacement for all incandescent equivalent lamp aplications. An energy efficient integrated LED driver operating at only 4.5 watts/8 watts delivers the same lumen output as an equivalent 40 watt/60 watt incandescent lamp. These lamps are suitable for damp and totally enclosed installation locations, dimmable to 10%, and supplies a reliable light source for at least 25,000 hours backed by a 5 year warranty. Elegant and efficient design Uniform illumination light profile Dimmable to 10% Decorative and general lighting Suitable for damp location installation Suitable for totally enclosed recessed luminaires The main problem with traditional halogen MR-16 bulbs is the amount of heat produced in such a small compact space. Energetic Lighting s LED MR-16 bulbs solve this issue by operating at 1/5th of the equivalent wattage while supplying the same amount of light needed for these applications. The light output can be dimmed down to 10% and will provide a reliable light source for at least 25,000 hours while backed by a 5 year warranty. Elegant and efficient design Uniform illumination light profile Dimmable to 10% Damp location installation Ambient lighting 40 41
E1F Series LIMITED WARRANTY Energetic Lighting warrants the products that it manufactures to be free from defects in material and workmanship, and agrees to repair or replace the defective product, from the date of purchase at its sole discretion. Please see specification sheets or product packaging for applicable warranty periods as products vary. Energetic Lighting will not cover failure due to the following: Improper installation or operation. Improper maintenance. Accidental damage, misuse or abuse of the product External causes or natural disasters. Normal wear and tear. Repairs or alterations to the product. Any use of the product in any way different than which the product was designed for. FILAMENT BULB For the truly classic bulb look, you can t go wrong with our LED filament bulbs! On or off, these bulbs give the guise of classic traditional incandescent bulbs. Upgrade to LED bulbs without affecting your classic atmosphere and room ambiance. These filament bulbs not only look great but won t miss a beat with performance; they have no problem delivering the light output needed to give off sufficient ambient lighting or dim it down to create the mood desired. Available with clear transparent glass or in a vintage tinted glass. Elegant and efficient design Uniform illumination light profile Dimmable down to 10% Damp location installation Ambient lighting ENERGETIC LIGHTING WILL NOT BE LIABLE, UNDER ANY CIRCUMSTANCES, FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING BUT NOT LIMITED TO LABOR COSTS OR LOST PROFITS RESULTING FORM THE USE OR INABILITY TO USE THE PROUCTS OR FROM THE PRODUCTS BEING INCORPORATED IN OR BECOMING A COMPONENT OF ANY OTHER PRODUCT OR GOOD. REPLACEMENT POLICY A replacement or credit claim must be within the warranty period. Claims will not be accepted without prior authorization. Distributor must call, fax or email Energetic Lighting for a Return Merchandise Authorization form which will be emailed to claimant. Energetic Lighting will arrange pick-up of defective products after RMA is approved. Return Merchandise Authorization is only good from 30 days from issue. A copy of the RMA must accompany product sent to Energetic Lighting. Energetic Lighting will not be responsible for any returned goods lost or damaged by carrier. Replacement or credit will be issued upon receipt of defective products. All returned products will be inspected tested by Energetic Lighting. Replacement or credit will only be issued to items confirmed to be defective. Energetic Lighting will pay for the shipping on approved replacements. If replacement need is mutually agreed to be urgent, Energetic Lighting will accept a new Purchase Order (PO) in which distributor is responsible for shipping charges. Upon receipt of defectives, a credit for products purchased will be issued. Energetic Lighting reserves the right to test the product and/or inspect the installation site and reduce the claim if it s determined to not be defective or at fault. Returns for non-defective products must be requested within 30 days of invoice. Returns will be assessed a 25% restocking fee and will be processed as a credit. Customer must pay freight for the return of non-defective products. Non-defective products must be returned in its original packaging. Products received broken or whose packaging is damaged will not be valid for a credit. No cash refunds for returned products. Credits apply only to future or existing orders. Energetic Lighting will not recognize a distributor debit memo until an Energetic Lighting credit memo has been issued. All returns are to be shipped to Energetic Lighting with an accompanying RMA copy. 42 43
back cover ENERGETIC LIGHTING 13445 12th ST., Chino, CA 91710 TEL: 1-866-492-6566 909-591-2345 FAX: 909-591-2448 Email: info@energeticlighting.com www.energeticlighting.com Energetic Lighting is a UL, Energy Star, and DLC listed company 44