Catalogue: TEH_02G Hardware for Sliding Doors (Glass)
Hardware for Sliding Doors (Glass) Contents Information General Information 3 HELM Hardware for Glass Sliding Doors HELM Accessories 8 HELM Modular.Concept 80 General Information 0 HELM Hardware-Modules 2 HELM GT General Information 20 HELM GT-L 0 up to 0 kg leaf weight 22 HELM GT-S 50 up to 50 kg leaf weight 2 HELM 53 General Information 32 HELM 53 up to 50 kg leaf weight 3 HELM 73 General Information 32 HELM 73 up to 80 kg leaf weight 2 HELM 20 General Information 52 HELM 20 up to 20 kg leaf weight 5 HELM 50 General Information 52 HELM 50 up to 50 kg leaf weight 2 Accessories Flush and Pull Handles Appendix Sample of Request for Proposal 70 Enquiry Form 7 2
Hardware for Sliding Doors (Glass) General Information General Information Introduction HELM hardware for glass sliding doors always offers suitable and elegant solutions for many various fields of application. High-quality materials and precise workmanship guarantee a perfect functionality and a long life. The hardware is, of course, designed for all common door sizes, single and double door constructions, as well as for leaf weights of up to 50 kg. The GT hardware (from page 20) makes the integrated mounting of fixed panels possible. On pages 5-7 you will find an overview of all hardware and their fields of application. The hardware excels at precise rolls, simple mounting and high-quality workmanship. The HELM hardware is, of course, tested according to DIN 527:998. We would specifically like to draw your attention to the HELM Modular.Concept 80 for glass sliding doors, which you will find on pages 0-9. With only one track system and various accessory modules all applications up to 80 kg leaf weight can be very easily covered. The range is complemented by various KWS flush and pull handles for all glass doors (from page ). 3
Hardware for Sliding Doors (Glass)
Overview Leaf weight (tempered safety glass) Hardware for Sliding Doors (Glass) Overview Hardware HELM 53 HELM 73 HELM 20 HELM 50 HELM GT-L 0 HELM GT-S 50 50 kg 80 kg 20 kg 50 kg 0 kg 50 kg Overview Hardware Leaf weight (LSG) 50 kg Mounting type: ceiling mounting wall mounting direct wall mounting side panel fixing Field of application: residential commercial Type of door: single and multiple leaf synchronised Damper and soft closing device types: damper and soft closing device door catcher Track surface: finish anodised Pelmetting clip-on pelmet or finish 2 2 anodised = yes = no track drilled on the side 2 pelmet integrated in the track system 5
Hardware for Sliding Doors (Glass) Overview Hardware HELM GT-L 0 up to 0 kg leaf weight Track aluminium or with drilled holes for wall or ceiling mounting in stock lengths of 000 mm or cut to size for glass sliding doors with a thickness of 8 mm and 0 mm (tempered safety glass) compact construction optionally with damper and soft closing device also realisable with fixed panel Attention: The relation of the door height to the door width may not cross 2,5:! tested according to DIN 527:998 200.000 cycles Further information from page 22 HELM GT-S 50 up to 50 kg leaf weight Track aluminium or with drilled holes for wall or ceiling mounting in stock lengths of 000 mm or cut to size for glass sliding doors with a thickness of 8 mm, 0 mm and 2 mm also suitable for LSG compact construction synchronised opening Attention: 80 mm longer track is necessary! optionally with damper and soft closing device also realisable with fixed panel Attention: The relation of the door height to the door width may not cross 2,5:! up to 80kg leaf weight tested according to DIN 527:998 200.000 cycles Further information from page 2 HELM 53 up to 50 kg leaf weight Track aluminium, aluminium or finish anodised with drilled holes for wall or ceiling mounting in stock lengths of 000 mm or cut to size Trolley double pair, with plain bearings Realisable constructions manual clip-on pelmet single and multiple leaf constructions tested according to DIN 527:998 00.000 cycles Further information from page 3
HELM 73 up to 80 kg leaf weight Track aluminium, aluminium or finish anodised, in stock lengths of 000 mm or cut to size, with drilled holes for wall or ceiling mounting Trolley double pair, with ball bearings Realisable constructions manual clip-on pelmet synchronised opening single and multiple leaf constructions SmartStop tested according to DIN 527:998 200.000 cycles Hardware for Sliding Doors (Glass) Overview Hardware use of SmartStop possible Overview Hardware Further information from page 2 HELM 20 up to 20 kg leaf weight Track aluminium, in stock lengths of 000 mm or cut to size, with drilled holes for ceiling mounting Trolley double pair, with ball bearings Realisable constructions manual synchronised opening single and multiple leaf constructions clip-on pelmet Note: The design of pelmet and cover caps requires the pelmet to be longer (7 mm) than the track. tested according to DIN 527:998 00.000 cycles Further information from page 5 HELM 50 up to 50 kg leaf weight Track aluminium, in stock lengths of 000 mm or cut to size, with drilled holes for ceiling mounting Trolley double pair, with ball bearings Realisable constructions manual single and multiple leaf constructions tested according to DIN 527:998 00.000 cycles Further information from page 2 7
Hardware for Sliding Doors (Glass) Accessories HELM pelmet for glass door clamps Aluminium pelmets ensure an attractive look wherever HELM hardware is used. HELM pelmets are simply clipped on the door clamps outer face. Product advantages simple mounting pelmetting on both sides possible Further information from page 3 HELMatic 230 volt drive HELMatic for HELM 73, HELM 20 and HELM 50 HELMatic moves doors The new generation of drives for HELM 73, HELM 20 and HELM 50 With the HELMatic 230-volt drive sliding doors and light sliding gates up to 50 kg door weight can be opened and closed fully automatically. With wireless push-button, motion detector as well as comfortable push&go function, every sliding door can be operated without effort using the HELMatic. In case of power failure the door can be pushed open manually. The HELMatic was rated with the test result "good" in the user text of the "Deutsche Gesellschaft für Gerontotechnik (GGT)" (German service company for gerontological technology) and is certified according to DIN EN 8520-2 - low energy operation. Motion detector SmartStop for HELM 73 We put an end to sliding leaves that close noisily and bounce back. Thanks to our new SmartStop system (HELM 73) for the use on one or both sides we stop each door finishively and pull it noiselessly into the final position. This piece of hardware makes sure that closed leaves remain closed. Product advantages door is slowed down towards the stop positions and pulled into the final position. gentle, quiet and comfortable closing slowing down can be finished on one or both sides mounting in the track profile used air cylinder is maintenance-free door is held in the stop position, thus an additional door catcher is not required Further information from page 7 8
Hardware for Sliding Doors (Glass) Accessories HELM projection track for pelmetting The projection track for pelmetting has to be combined with the track for ceiling mounting. Distances as frames or baseboards can be easily leveled. Easy assembly with enclosed screws. Product advantages complete system including pelmet in same appearance easy installation Accessories Further information from page HELM spacer profile The spacer profile is used to extend distances to the wall when there are frames or baseboards. Wooden substructions are no longer needed. This simplifies the installation and makes a more attactive look. Product advantages no substructions necessary easy installation Further information from page Pull handles and Flush handles The range of various KWS flush and pull handles for all glass doors from page 7-9 as well as in the KWS catalogues. Further information from page 9
HELM Modular.Concept 80 up to 80 kg leaf weight 0
The idea Sliding doors of glass can be used in a wide range of contexts in both living and working environments. As well as their traditional application as normal doors for rooms, they are increasingly being used as room dividers. Regardless of whether they are used to separate kitchen areas, walk-in wardrobes or as part of office partitions, the possibilities are numerous, and therefore so are the range of corresponding fitting systems. HELM Modular.Concept 80 up to 80 kg leaf weight HELM Modular.Concept 80 For this reason HELM has developed the compact yet flexible Modular.Concept 80. The use of just one track system with a range of accessory modules enables us to respond to different individual requirements. From simple single timber doors up to the double door systems with panels of glass weighing 80 kg and synchronised opening a wide range of applications can be delivered quickly and easily. The Modular.Concept 80 is based on our tried and tested HELM 53 and HELM 73 fittings which have been continuously developed over many years and which now have been improved by the addition of some important components (SmartStop, pelmets, synchronised operation, finish etc.). The following list shows all available modules. Depending on the relevant application and requirements, fittings systems for timber and glass doors can be compiled from this selection. The advantages - multiple applications for glass doors, single or double door, wall, ceiling and wall pocket assembly, pelmets, projection tracks, HELM SmartStop, low headroom installation and synchronised opening and closing - modular structure: simple price calculation, quick delivery times, compact range of stock and at the same time a wide range of different applications - additional accessories can be easily added later - wide range of KWS flush and pull handles
HELM Modular.Concept 80 up to 80 kg leaf weight HELM track no. 0 - für ceiling mounting and for receiving the wall mounting bracket with drilled holes aluminium aluminium for door widths of 500-700 mm track lenght 300 mm 0003 000 0003 for door widths of 70-900 mm track lenght 700 mm 00032 0002 00037 for door widths of 90-00 mm track lenght 200 mm 00033 0003 00038 for door widths of 0-300 mm track lenght 2500 mm 0003 000 00039 for door widths of 30-00 mm track lenght 300 mm 00035 0005 0000 stock lenght 000 mm 00050 0005 0005 HELM track no. 0 - for wall mounting with lateral drilled holes These tracks are used in case of wall mounting in combination with the clip-on pelmet. aluminium aluminium for door widths of 500-700 mm track lenght 300 mm 0000 00070 for door widths of 70-900 mm track lenght 700 mm 00002 000702 for door widths of 90-00 mm track lenght 200 mm 00003 000703 for door widths of 0-300 mm track lenght 2500 mm 0000 00070 for door widths of 30-00 mm track lenght 300 mm 00005 000705 stock lenght 000 mm 00000 000700 HELM end caps - usable with HELM track no. 0 aluminium 2 end caps 00003 2
HELM accessories: wall mounting brackets, pocket door kids and projection tracks HELM wall mounting bracket sets Description (no.) wall mounting bracket /0 00 (nos.) wall mounting bracket /0 300 mm 003 (nos.) wall mounting bracket /0 700 mm 00 HELM Modular.Concept 80 up to 80 kg leaf weight HELM Modular.Concept 80 7 (nos.) wall mounting bracket /0 200 mm 005 8 (nos.) wall mounting bracket /0 2500 mm 00 0 (nos.) wall mounting bracket /0 300 mm 007 HELM kits for pocket door installation This kit is for use in conjunction with the HELM 73 soffit fix track Track in timber or glass door applications Description kit contains: x universal mounting brackets (please specify according to your track length) bottom guide no. 70, latch screw universal mounting brackets no. 73 for 300 mm 0073 universal mounting brackets no. 73 for 700 mm 007 7 universal mounting brackets no. 73 for 200 mm 0075 8 universal mounting brackets no. 73 for 2500 mm 007 0 universal mounting brackets no. 73 for 300 mm 0077 HELM projection track aluminium Supplied complete with screws and washers Interlengths and lengths from 2500 mm are available as dimension lengths (Part No. 00050) The projection track is installed with the soffit fix track no. 0 Description projection track, 300 mm long for door widths of 500-700 mm projection track, 700 mm long for door widths of 70-900 mm projection track, 200 mm long for door widths of 90-00 mm projection track, 2500 mm long for door widths of 0-300 mm 0000 00070 00020 000250 2 end caps for projection track 0000 projection track, 000 mm stock length 00000 projection track, cut to length, per metre 0000 HELM projection track aluminium Supplied complete with screws and washers Interlengths and lengths from 2500 mm are available as dimension lengths (Part No. 00050) The projection track is installed with the soffit fix track no. 0 Description projection track, 300 mm long for door widths of 500-700 mm projection track, 700 mm long for door widths of 70-900 mm projection track, 200 mm long for door widths of 90-00 mm projection track, 2500 mm long for door widths of 0-300 mm 000270 000280 000290 000300 2 end caps for projection track 00002 projection track, 000 mm stock length 0000 projection track, cut to length, per metre 00050 3
HELM Modular.Concept 80 up to 80 kg leaf weight HELM mounting parts: wall mounting bracket sets, complementary sets for pocket door installation and projection tracks HELM projection track for pelmetting aluminium The projection track is used in combination with track 0 with holes for ceiling mounting. Description projection track, 000 mm stock length 00350 projection track, cut length per metre 003599 screw connection kit includes: 8 U adhesive discs M5 8 U hexagonal nuts M5 8 hexagonal socket head screws M5 x 0 mm 0035 HELM projection track for pelmetting aluminium The projection track is used in combination with track 0 with holes for ceiling mounting. Description projection track, 000 mm stock length 00330 projection track, cut length per metre 003399 screw connection kit includes: 8 U adhesive discs M5 8 U hexagonal nuts M5 8 hexagonal socket head screws M5 x 0 mm 0035 HELM spacer profile aluminium The spacer profile is used in combination with track no. 0 with holes on the side for wall mounting. Description spacer profile, 000 mm stock length, spacer profile, cut length per metre, spacer profile, 000 mm stock length, spacer profile, cut length per metre, 00370 003799 00390 003999 HELM end cap for projection track for clip on pelmet Description 2 end caps, glass pelmets (5 x 02 x 2,5 mm) 2 end caps,, glass pelmets (5 x 02 x 2,5 mm) 0037 00377 HELM end cap for projection track in connection with spacer profile for clip on pelmet Description 2 end caps, glass pelmets ( x 02 x 2,5 mm) 2 end caps,, glass pelmets ( x 02 x 2,5 mm) 00380 0038 HELM end cap for spacer profile for clip on pelmet Description 2 end caps, glass pelmets (5,5 x 9,5 x 2,5 mm) 2 end caps,, glass pelmets (5,5 x 9,5 x 2,5 mm) 00378 00379 HELM end cap for spacer profile double-sided for clip on pelmet Description 2 end caps, glass pelmets (72 x 9,5 x 2,5 mm) 2 end caps,, glass pelmets (72 x 9,5 x 2,5 mm) 0037 00375
HELM 53 Complete sets for glass door applications tested according to DIN 527:998 00.000 cycles To suit a single glass door up to 50 kg, door thickness 8 mm tempered safety glass trolleys with tandem nylon rollers (self lubricating) Description 2 trolleys no. 53 2 glass door clamps 70 mm (for 8 mm glass TSG) 2 door stops no. 5 P bottom guide to suite 8 mm glass For double doors two sets are required. HELM Modular.Concept 80 up to 80 kg leaf weight 00538 HELM Modular.Concept 80 HELM 73 use of SmartStop possible To suit a single glass door up to 50 kg, door thickness 8 mm tempered safety glass Description 2 trolleys no. 73 2 glass door clamps 70 mm (for 8 mm glass TSG) 2 door stops no. 5 P bottom guide to suite 8-2 mm glass 007398 tested according to DIN 527:998 200.000 cycles trolleys with tandem nylon rollers and integral ball race system For double doors two sets are required. HELM 73 use of SmartStop possible To suit a single glass door up to 80 kg, door thickness 8 and 0 mm tempered safety glass Description 2 trolleys no. 73 2 glass door clamps 80 mm (for 8 and 0 mm glass TSG) 2 door stops no. 5 P bottom guide to suite 8-2 mm glass 00738 trolleys with tandem nylon rollers and integral ball race system For double doors two sets are required. tested according to DIN 527:998 200.000 cycles HELM 73 synchronised Description trolleys no. 73 use of SmartStop possible tested according to DIN 527:998 200.000 cycles To suit double glass doors up to 80 Kg, synchronised opening of two bi-parting doors, door thickness 8 and 0 mm tempered safety glass, tooth belt driven trolleys with tandem nylon rollers and integral ball race system suitable with clip on pelmet glass door clamps 80 mm (for 8 and 0 mm glass TSG) door stops no. 5 P 2 bottom guides no. 20 to suite 8-2 mm 2 belt guides rollers coupling joint for toothed belt tooth belt clamp tooth belt (not included within the set) Please specify length Calculation: 2 x track length + 20 mm 00738 00000700 More accessories from page 9 5
HELM Modular.Concept 80 up to 80 kg leaf weight Complete HELM 73 sets for glass door applications HELM 73 use of SmartStop possible To suit a single glass door up to 80 kg, door thickness 8 and 0 mm tempered/laminated safety glass cover caps* rounded Description 2 trolleys no. 73 cover caps no. 73 round (TSG/LSG) 2 flange incl. mounting material and support screws M8 x 55 mm 2 door stops no. 5 P bottom guide no. 20 to suite 8-2 mm For double doors two sets are required. 007390 not suitable with clip on pelmet HELM 73 use of SmartStop possible finish To suit a single glass door up to 80 kg, door thickness 8 and 0 mm tempered/laminated safety glass cover caps* rounded Description 2 trolleys no. 73 cover caps no. 73 round (TSG/LSG) 2 flange incl. mounting material and support screws M8 x 55 mm 2 door stops no. 5 P bottom guide no. 20 to suite 8-2 mm For double doors two sets are required. 0073902 not suitable with clip on pelmet HELM 73 use of SmartStop possible To suit a single glass door up to 80 kg, door thickness 8 and 0 mm tempered/laminated safety glass cover caps* square Description 2 trolleys no. 73 cover caps no. 73 squere (TSG/LSG) 2 flange incl. mounting material and support screws M8 x 55 mm 2 door stops no. 5 P bottom guide no. 20 to suite 8-2 mm For double doors two sets are required. 0073903 not suitable with clip on pelmet HELM 73 use of SmartStop possible finish To suit a single glass door up to 80 kg, door thickness 8 and 0 mm tempered/laminated safety glass cover caps* square Description 2 trolleys no. 73 cover caps no. 73 squere (TSG/LSG) 2 flange incl. mounting material and support screws M8 x 55 mm 2 door stops no. 5 P bottom guide no. 20 to suite 8-2 mm For double doors two sets are required. 007390 not suitable with clip on pelmet *Attention: Cover caps made of plastic, enameled in colour tone of and More accessories from page 9
HELM modification sets HELM modification set 53 To suit a single glass door up to 50 kg, door thickness 8 mm tempered safety glass Conversion Kit converts timber sliding door sets into glass door sliding door sets Description 2 glass door clamps 70 mm (for 8 mm glass) bottom guide to suite 8 mm glass For double doors two sets are required. HELM Modular.Concept 80 up to 80 kg leaf weight 00539 HELM Modular.Concept 80 Suitable only for use with HELM 53 HELM modification set 73 To suit a single glass door up to 80 kg, door thickness 8 and 0 mm tempered safety glass Conversion Kit converts timber sliding door sets into glass door sliding door sets Description 2 glass door clamps 80 mm (for 8 and 0 mm glass) bottom guide no. 20 (8-2 mm glass) For double doors two sets are required. 00739 Suitable only for use with HELM 73 HELM holding fixture HELM holding fixture aluminium For the connection with fixed pane glass Description holding fixture for glass fixed panel stock length 000 mm holding fixture for glass fixed panel cut length kit (2 pieces) end caps for track with glass fixed panel 0009 00095 0009 U pelmet, stock length 000 mm 005850 U pelmet, cut to length 00585 HELM holding fixture aluminium stainless steel For the connection with fixed pane glass Description holding fixture for glass fixed panel stock length 000 mm holding fixture for glass fixed panel cut length kit (2 pieces) end caps for track with glass fixed panel 00097 00098 00099 U pelmet, stock length 000 mm 00580 U pelmet, cut to length 0058 More accessories from page 9 7
HELM Modular.Concept 80 up to 80 kg leaf weight HELM clip on pelmet HELM clip on pelmet Aluminium The pelmet is installed on single side in side mounted or on both sides in soffit mounted installations. Matching end caps available to suit application. For wall mounting we recommend track and spacer profile 0 pre-drilled for side fixing. (Wall mounting brackets are not required) Description clip on pelmet, 300 mm long 000770 clip on pelmet, 700 mm long 0007702 clip on pelmet, 200 mm long 0007703 clip on pelmet, 2500 mm long 000770 clip on pelmet, 000 mm long stock length clip on pelmet, cut to length, per metre 2 end caps for pelmet installed on single side / side fixed 2 end caps for pelmet installed on both sides of the track / soffit fixed 0007 00077 00082 00083 HELM clip on pelmet Aluminium satin finish anodised The pelmet is installed on one side in side mounted or on both sides in soffit mounted installations. Matching end caps available to suit application. For wall mounting we recommend track and spacer profile 0 pre-drilled for side fixing. (Wall mounting brackets are not required) Description clip on pelmet, 300 mm long 000790 clip on pelmet, 700 mm long 0007902 clip on pelmet, 200 mm long 0007903 clip on pelmet, 2500 mm long 000790 clip on pelmet, 000 mm long stock length clip on pelmet, cut to length, per metre 2 end caps for pelmet installed on single side / side fixed 2 end caps for pelmet installed on both sides of the track / soffit fixed 00078 00079 0008 00085 HELM pelmet for glass door clamps HELM pelmet for glass door clamps Aluminium Description Set pelmet, up to 500 mm door width, for 2 mm TSG Set pelmet, from 500 mm up to 3000 mm door width, for 2 mm TSG Set pelmet, up to 500 mm door width, for 8 and 0 mm TSG Set pelmet, from 500 mm up to 3000 mm door width, for 8 and 0 mm TSG 2007000202 2007000203 200700020 2007000205 More accessories from page 9 8
HELM accessories tested according to DIN 527:998 200.000 cycles HELM SmartStop Damper and soft closing device suitable for max door weight 80 kg. Suitable only for use with HELM 73 HELM Modular.Concept 80 up to 80 kg leaf weight Description piece SmartStop 007350 upgrade kit one-sided with SmartStop and Trolley 73 00735 without guide upgrade kit one-sided with 2 SmartStops and 2 Trolleys 73 007352 without guide HELM Modular.Concept 80 Door piston Door piston for pocket door installation Description door piston /plastic 0080 Bottom end stop no. 200 aluminium, adjustable for 8, 0 and 2 mm Description black 200000000 2000000002 2000000003 9
HELM GT 20
HELM GT HELM GT-L 0 up to 0 kg leaf weight without fixed panel for glass sliding doors with a thickness of 8 mm and 0 mm (tempered safety glass) compact construction optionally with damper and soft closing device wall and ceiling mounting HELM GT up to 0 kg leaf weight with fixed panel for glass sliding doors with a thickness of 8 mm and 0 mm (tempered safety glass) compact construction optionally with damper and soft closing device with fixed panel ceiling mounting tested according to DIN 527:998 200.000 cycles Attention: The relation of the door height to the door width may not cross 2,5:! Further information from page 22 HELM GT-S 50 up to 50 kg leaf weight without fixed panel for glass sliding doors with a thickness of 8 mm, 0 mm and 2 mm door weights of up to 50 kg also suitable for LSG compact construction synchronised opening for double doors possible optionally with damper and soft closing device wall and ceiling mounting up to 50 kg leaf weight with fixed panel for glass sliding doors with a thickness of 8 mm, 0 mm and 2 mm door weights of up to 50 kg also suitable for LSG compact construction synchronised opening for double doors possible Attention: 80 mm longer track is necessary! optionally with damper and soft closing device with fixed panel ceiling mounting Attention: The relation of the door height to the door width may not cross 2,5:! up to 80kg leaf weight tested according to DIN 527:998 200.000 cycles Further information from page 2 2
HELM GT-L 0 up to 0 kg leaf weight 2 5 3 7 Track GT-L 0 Without a fixed side panel, in stock lengths of 000 mm or cut to size (please specify), drilled approx. every 00 mm, aluminium or anodised Part. No. stock length ceiling mounting 005700 cut length ceiling mounting 0057020 stock length wall mounting 00570 cut length wall mounting 005702 stock length ceiling mounting 0057030 cut length ceiling mounting 005700 stock length wall mounting 005703 cut length wall mounting 00570 2 End cap HELM GT-L 0 for track without side panel, aluminium silver anodised or right/left 005735, right/left 00573 Track GT-L 0 With a fixed side panel, in stock lengths of 000 mm or cut to size (please specify), drilled approx. every 00 mm, aluminium or stainless steel anodised aluminium (see also T-shaped cover and clips GT-L 0) Part. No. stock length ceiling mounting 00570 cut length ceiling mounting 0057 stock length ceiling mounting 005720 cut length ceiling mounting 00572 22
HELM GT-L 0 up to 0 kg leaf weight 2 3 End cap HELM GT-L 0 for track with side panel, aluminium or finish anodised Pelmet GT-L 0 In stock lengths of 000 mm or cut to size (please specify), aluminium or natural finish aluminium right/left 005735, right/left 00573 Part. No. Stock length, aluminium 005730 Cut length, aluminium 00573 Stock length, aluminium 00570 Cut length, aluminium 0057 HELM GT-L 0 Trolley GT-L 0 aluminium, with ball bearings unit = 2 Trolleys aluminium 0057330V 5 Door catcher GT-L 0 aluminium left 0057380 right 005738 Bottom guide no. 20 aluminium, adjustable for 8, 0 and 2 mm black 2000003008 2000003009 200000300 7 Bottom end stop no. 200 aluminium, adjustable for 8, 0 and 2 mm black 200000000 2000000002 2000000003 T-shaped pelmet GT-L 0 in stock lengths of 000 mm or cut to size, aluminium or finish anodised stock length 005750 cut length 00575 stock length finish anodised 00570 cut length finish anodised 0057 Clamps GT-L 0 for T-shaped pelmet, unit pieces 005752 More accessories for HELM GT-L 0 from page 2 23
HELM GT-L 0 Accessories Complete sets for glass sliding doors HELM GT-L 0 for single leaf glass sliding doors up to 0 kg leaf weight and 8 and 0 mm glass thickness (tempered safety glass), without side panel Complete set optains: Trach without side panel Pelmet Trolley no. 0057330V Door catcher left no. 0057380 Door catcher right no. 005738 Bottom guide no. 200003009 kit GT-L 0,, track length 2.000 mm, ceiling mounting, 8 and 0 mm tempered safety glass, without fixed panel kit GT-L 0,, track length 2.000 mm, wall mounting, 8 and 0 mm tempered safety glass, without fixed panel kit GT-L 0,, track length 2.500 mm, ceiling mounting, 8 and 0 mm tempered safety glass, without fixed panel kit GT-L 0,, track length 2.500 mm, wall mounting, 8 and 0 mm tempered safety glass, without fixed panel kit GT-L 0,, track length 3.000 mm, ceiling mounting, 8 and 0 mm tempered safety glass, without fixed panel kit GT-L 0,, track length 3.000 mm, wall mounting, 8 and 0 mm tempered safety glass, without fixed panel kit GT-L 0, track length 2.000 mm, ceiling mounting, 8 and 0 mm tempered safety glass, without fixed panel kit GT-L 0, track length 2.000 mm, wall mounting, 8 and 0 mm tempered safety glass, without fixed panel kit GT-L 0, track length 2.500 mm, ceiling mounting, 8 and 0 mm tempered safety glass, without fixed panel kit GT-L 0, track length 2.500 mm, wall mounting, 8 and 0 mm tempered safety glass, without fixed panel kit GT-L 0, track length 3.000 mm, ceiling mounting, 8 and 0 mm tempered safety glass, without fixed panel kit GT-L 0, track length 3.000 mm, wall mounting, 8 and 0 mm tempered safety glass, without fixed panel 005750 00575 005752 005753 00575 005755 00570 0057 00572 00573 0057 00575 Accessories for HELM GT-L 0 End stop GT-L 0 in connection with damper and soft closing device left 0057350 right 005735 Damper and soft closing device GT-L 0 with release bolt 0 kg, one-sided 005735 0 kg, two-sided 00573 Bottom guide profile for side panel in stock lengths of 000 mm or cut to size, aluminium or stainless steel stock length 005770 cut length 00577 stock length 005772 cut length 005773 More accessories, flush and pull handles, from page 2
HELM GT-L 0 Technical Specifications HELM GT-L 0, without side panel Track GT-L 0, without side panel stock lenght, ceiling mounting 005700 0057030 22 stock lenght, wall mounting 00570 005703 22 cut lenght, ceiling mounting 0057020 005700 22 cut lenght, wall mounting 005702 00570 22 End cap, right/left 005735 00573 22 5 HELM GT-L 0 3 Pelmet GT-L 0 stock lenght 005735 00575 23 cut lenght 00573 0057 23 3 Trolley GT-L 0 Aluminium 0057330V 23 Part-no. Part-no. 5 Door catcher GT-L 0 right left Aluminium 005738 0057380 23 Bottom Guide black Aluminium bottom end stop no. 200 200000000 2000000002 2000000003 23 Aluminium bottom guide no. 20 2000003008 2000003009 200000300 23 HELM GT-L 0, with side panel 2 Track GT-L 0, with side panel stock lenght, ceiling mounting 00570 005720 22 cut lenght, ceiling mounting 0057 00572 22 End cap, right/left 005735 00573 23 5 3 Pelmet GT-L 0 stock lenght 005735 00575 23 cut lenght 00573 0057 23 Trolley GT-L 0 7 8 3 Aluminium 0057330V 23 Part-no. Part-no. 5 Door catcher GT-L 0 right left Aluminium 005738 0057380 23 Bottom Guide black Aluminium bottom end stop no. 200 200000000 2000000002 2000000003 23 Aluminium bottom guide no. 20 2000003008 2000003009 200000300 23 7 T-shaped pelmet GT-L 0 stock lenght 005750 00570 23 cut lenght 00575 0057 23 9 8 Clamps GT-L 0 for T-shaped pelmet 005752 23 9 U-Track for side panel stock lenght 005770 005772 2 cut lenght 00577 005773 2 25
HELM GT-S 50 up to 50 kg leaf weight 5 2 3 7 2 Track GT-S 50 without side panel, in stock lengths of 000 mm or cut to size, drilled approx. every 00 mm, aluminium or finish anodised End cap GT-S 50 aluminium or finish anodised, for track without side panel stock length ceiling mounting 005800 cut length ceiling mounting 0058020 stock length wall mounting 00580 cut length wall mounting 005802 stock length ceiling mounting 0058030 cut length ceiling mounting 005800 stock length wall mounting 005803 cut length wall mounting 00580 right/left 005835, right/left 00583 Track GT-S 50 with side panel, in stock lengths of 000 mm or cut to size, drilled approx. every 00 mm, aluminium or stainless steel (see also bottom track GT-S 50) stock length ceiling mounting 00580 cut length ceiling mounting 0058 stock length ceiling mounting 005820 cut length ceiling mounting 00582 2
HELM GT-S 50 up to 50 kg leaf weight 2 3 End cap GT-S 50 aluminium or finish anodised, for track with side panel Pelmet GT-S 50 in stock lengths of 000 mm or cut to size, aluminium or finish anodised right/left 005835, right/left 00583 stock length 005835 cut length 00583 stock length 00585 cut length 0058 HELM GT-S 50 Trolley GT-S 50 aluminium, with ball bearing unit = 2 Trolleys aluminium 0058330V 5 Door catcher GT-S 50 aluminium left 0058380 right 005838 Bottom guide no. 20 aluminium, adjustable for 8, 0 and 2 mm black 2000003008 2000003009 200000300 7 Bottom end stop no. 200 aluminium, adjustable for 8, 0 and 2 mm black 200000000 2000000002 2000000003 Bottom guide profile for 2 mm LSG aluminium 200000303 20000030 Channel pelmet HELM GT-S 50 in stock lengths of 000 mm or cut to size, aluminium or finish anodised stock length 005850 cut length 00585 stock length 00580 cut length 0058 More accessories for HELM GT-S 50 from page 28 27
HELM GT-S 50 Accessories Complete sets for glass sliding doors HELM GT-S 50 for single leaf glass sliding doors up to 50 kg leaf weight and 8, 0 and 2 mm glass thickness, without side panel kit GT-S 50,, track length 2.000 mm, ceiling mounting, without side panel kit GT-S 50,, track length 2.000 mm, wall mounting, without side panel kit GT-S 50,, track length 2.500 mm, ceiling mounting, without side panel kit GT-S 50,, track length 2.500 mm, wall mounting, without side panel kit GT-S 50,, track length 3.000 mm, ceiling mounting, without side panel kit GT-S 50,, track length 3.000 mm, wall mounting, without side panel kit GT-S 50,, track length 2.000 mm, ceiling mounting, without side panel kit GT-S 50,, track length 2.000 mm, wall mounting, without side panel kit GT-S 50,, track length 2.500 mm, ceiling mounting, without side panel kit GT-S 50,, track length 2.500 mm, wall mounting, without side panel kit GT-S 50,, track length 3.000 mm, ceiling mounting, without side panel kit GT-S 50,, track length 3.000 mm, wall mounting, without side panel 005850 00585 005852 005853 00585 005855 00580 0058 00582 00583 0058 00585 Accessories for HELM GT-S 50 End stop GT-S 50 in connection with damper and soft closing device left 0058350 right 005835 Damper and soft closing device GT-S 50 with release bolt 80 kg, one-sided 005835 80 kg, two-sided 00583 50 kg, one-sided 0058375 50 kg, two-sided 005837 Synchronised* kit for double, synchronised glass sliding doors 2 deflection rollers 2 wire rope connector short for top door driver long for bottom rope (2 m) 005825 More accessories for HELM GT-S 50 from page 58 *Attention: Due to the installation conditions of the two deflection rollers the track has to be extended on both sides by 0 mm. If there is a fixed pane (side part), the track/pane has to be extended by 0 mm on each side as well. 28
HELM GT-S 50 Technical Specifications Accessories for HELM GT-S 50 Bottom guide profile for side panel in stock lengths of 000 mm or cut to size, aluminium or finish anodised stock length 005770 cut length 00577 stock length 005772 cut length 005773 HELM GT-S 50 More accessories, flush and pull handles, from page 29
HELM GT-S 50 Technical Specifications HELM GT-S 50, without side panel 5 0 3,5 X 5,7 5 3 ~20 ~35 Track GT-S 50, without side panel stock lenght, ceiling mounting 005800 0058030 2 stock lenght, wall mounting 00580 005803 2 cut lenght, ceiling mounting 0058020 005800 2 cut lenght, wall mounting 005802 00580 2 End cap, right/left 005835 00583 2 3 Pelmet GT-S 50 stock lenght 005835 00585 27 cut lenght 00583 0058 27 0 Trolley GT-S 50 BH GH Aluminium 0058330V 27 LH Part-no. Part-no. 5 Door catcher GT-S 50 right left Aluminium 005838 0058380 27 Bottom Guide black Aluminium bottom end stop no. 200 200000000 2000000002 2000000003 27 Aluminium bottom guide no. 20 2000003008 2000003009 200000300 27 25 33 0 HELM GT-S 50, with side panel 7 5 3 Track GT-S 50, with side panel stock lenght, ceiling mounting 00580 005820 2 cut lenght, ceiling mounting 0058 00582 2 End cap, right/left 005835 00583 27 3 Pelmet GT-S 50 stock lenght 005835 00585 27 cut lenght 00583 0058 27 8 Trolley GT-S 50 Aluminium 0058330V 27 Part-no. Part-no. 5 Door catcher GT-S 50 right left Aluminium 005838 0058380 27 Bottom Guide black Aluminium bottom end stop no. 200 200000000 2000000002 2000000003 27 Aluminium bottom guide no. 20 2000003008 2000003009 200000300 27 Aluminium bottom guide for 2 mm TSG 200000303 20000030 27 7 U-Pelmet GT-S 50 Lagerlänge 005850 00580 27 Maßlänge 00585 0058 27 8 U-Track for side panel stock lenght 005770 005772 29 cut lenght 00577 005773 29 30
3
HELM 53 and HELM 73 32
HELM 53 and HELM 73 HELM 53 up to 50 kg leaf weight Track aluminium, aluminium or with drilled holes for wall or ceiling mounting in stock lengths of 000 mm or cut to size Trolley double pair, with plain bearings Realisable constructions manual clip-on pelmet single and multiple leaf constructions tested according to DIN 527:998 00.000 cycles HELM 53 and HELM 73 Further information from page 3 HELM 73 up to 80 kg leaf weight Track aluminium, aluminium or with drilled holes for wall or ceiling mounting in stock lengths of 000 mm or cut to size Trolley double pair, with ball bearings Realisable constructions manual clip-on pelmet synchronised opening single and multiple leaf constructions SmartStop tested according to DIN 527:998 200.000 cycles use of SmartStop possible Further information from page 2 33
HELM 53 up to 50 kg leaf weight 5 3 2 Track no. 0 aluminium, aluminium or, in stock lengths of 000 mm or cut to size, for ceiling mounting, drilled holes approx. every 300-350 mm stock length 00050 cut length 00052 stock length 0005 cut length 00053 stock length 0005 cut length 00058 aluminium, aluminium or, in stock lengths of 000 mm or cut to size, for direct wall mounting with lateral drilled holes stock length, drilled holes on the side cut length, drilled holes on the side stock length, drilled holes on the side cut length, drilled holes on the side 00000 000 000700 00070 3
HELM 53 up to 50 kg leaf weight 2 Mounting parts wall mounting bracket no. /0 with fixed bolt, zinc-plated zinc-plated 00 ceiling plate no. /02 with fixed bolt, zinc-plated zinc-plated 002 HELM 53 3 Trolley no. 53 double pair with plastic plain bearing, roller body black, support screw zinc-plated plastic 00535 Glass door clamps for 8 mm tempered safety glass, aluminium silver anodised, 70 mm long 27 80 2 0 70 mm long, for 8 mm tempered safety glass 050070002023 for 8 and 0 mm tempered safety glass, aluminium, 80 mm long with T-section 80 mm long, for 8 and 0 mm tempered safety glass 200700020 5 Door catcher no. 5 P zinc-plated, plastic zinc-plated/plastic 00500 Bottom guide plastic, with screw and plug, for 8 mm tempered safety glass white 20000030 More accessories for HELM 53 from page 3 35
HELM 53 Accessories Accessories for HELM 53 7 Pelmet for door clamps aluminium silver anodised Set pelmet, up to 500 mm door width, for 2 mm TSG Set pelmet, from 500 mm up to 3000 mm door width, for 2 mm TSG Set pelmet, up to 500 mm door width, for 8 and 0 mm TSG Set pelmet, from 500 mm up to 3000 mm door width, for 8 and 0 mm TSG 2007000202 2007000203 200700020 2007000205 9,5 53 2,5 8 Clip-on pelmet aluminium or finish anodised, in stock lengths of 000 mm or cut to size. The pelmet can be used on one side in case of wall mounting or on both sides in case of ceiling mounting. The end caps are to be picked accordingly. clip-on pelmet, stock length clip-on pelmet, cut length 2 end caps for the one-sided pelmet 9,5 x mm 2 end caps for the two-sided pelmetting 9,5 x 53 mm clip-on pelmet, stock length 0007 00077 00082 00083 00078 clip-on pelmet, cut length 00079 2 end caps for one-sided pelmetting 9,5 x mm 0008 2 end caps for both-sided pelmetting 9,5 x 53 mm 00085 9 HELM projection track for pelmetting aluminium silver anodised The projection track is used in combination with track 0 with holes for ceiling mounting. projection track, 00350 000 mm stock length projection track, cut length per metre 003599 screw connection kit includes: 8 U adhesive discs M5 8 U hexagonal nuts M5 0035 8 hexagonal socket head screws M5 x 0 mm HELM projection track for pelmetting aluminium The projection track is used in combination with track 0 with holes for ceiling mounting. HELM end cap for projection track for glass pelmets 5 x 02 x 2,5 mm projection track, 00330 000 mm stock length projection track, cut length per metre 003399 screw connection kit includes: 8 U adhesive discs M5 8 U hexagonal nuts M5 0035 8 hexagonal socket head screws M5 x 0 mm 2 end caps, 0037 2 end caps, 00377 More accessories for HELM 53 from page 37 3
HELM 53 Accessories Accessories for HELM 53 0 HELM spacer profile aluminium The spacer profile is used in combination with track no. 0 with holes on the side for wall mounting. HELM end cap for spacer profile for glass pelmets 5,5 x 9,5 x 2,5 mm spacer profile, 000 mm stock length, spacer profile, cut length per metre spacer profile, 000 mm stock length, spacer profile, cut length per metre, 00370 003799 00390 003999 2 end caps, 00378 2 end caps, finish anodised 00379 HELM 53 HELM end cap for spacer profile double-sided for glass pelmets 72 x 9,5 x 2,5 mm 2 end caps, 0037 2 end caps, 00375 HELM end cap for projection track in connection with spacer profile for glass pelmets x 02 x 2,5 mm 2 end caps, 00380 2 end caps, 0038 Further accessories Bottom guide no. 20 aluminium adjustable for 8, 0 and 2 mm black 2000003008 2000003009 200000300 Bottom end stop no. 200 aluminium, adjustable for 8, 0 and 2 mm black 200000000 2000000002 2000000003 Door piston door piston for pocket door installation piece door piston / plastic 0080 More accessories, flush and pull handles, from page 37
HELM 53 Technical Specifications HELM 53 Wall mounting, with wall mounting bracket no. /0 5,8 5,8 2 3 2 3 5 9 7+8 33,3, Track no. 0 stock length 00050 0005 0005 3 cut length 00052 00053 00058 3 2 Wall mounting bracket no. 0/0 zinc-plated 00 35 3 Trolley no. 53 plastic 00535 35 Glass door clamp 70 mm long, for 8 mm TSG 050070002023 35 80 mm long, for 8 and 0 mm TSG 200700020 35 5 Door catcher no. 5 P 30 7 zinc-plated/plastic 00500 35 Bottom guide plastic 20000030 35 8 7 Pelmet for glass door clamps 2007000202 3 0 20 25 HELM 53 Wall mounting, track with drilled holes on the side and one-sided pelmetting 33,3 9 2 3 5 3 Track no. 0 stock length, drilled holes on the side 00000 000700 3 cut length, drilled holes on the side 000 00070 3 8 Clip on pelmet clip on pelmet, stock length 0007 00078 3 clip on pelmet, cut length 00077 00079 3 2 end caps, one-sided 00082 0008 3 3 0 2 7+8 27 8 9,5 93,3 3 Trolley no. 53 plastic 00535 35 Glass door clamp 70 mm long, for 8 mm TSG 050070002023 35 80 mm long, for 8 and 0 mm TSG 200700020 35 5 Door catcher no. 5 P 5,5 8 0 20 zinc-plated/plastic 00500 35 Bottom guide plastic 20000030 35 25 38
HELM 53 Technical Specifications HELM 53 Ceiling mounting, with double-sided pelmetting Track no. 0 stock length 00050 0005 0005 3 cut length 00052 00053 00058 3 53 3 8 Clip on pelmet 2x clip on pelmet, stock length 0007 00078 3 2x clip on pelmet, cut length 00077 00079 3 2 end caps, two-sided 00083 00085 3 27 8 0 20 33,3 5 3 HELM 53 3 Trolley no. 53 plastic 00535 35 0 7+8 9,5 93,3 Glass door clamp 70 mm long, for 8 mm TSG 050070002023 35 80 mm long, for 8 and 0 mm TSG 200700020 35 5 Door catcher no. 5 P 3 2 zinc-plated/plastic 00500 35 Bottom guide plastic 20000030 35 8 5,5 8 25 HELM 53 Wall mounting, track with drilled holes on the side, spacer profile and one-sided pelmetting Track no. 0 stock length, drilled holes on the side 00000 000700 3 cut length, drilled holes on the side 000 00070 3 8 Clip on pelmet clip on pelmet, stock length 0007 00078 3 clip on pelmet, cut length 00077 00079 3 0 Spacer profile spacer profile, stock length 00370 00390 37 spacer profile, cut length 003799 003999 37 2 end caps 00378 00379 37 3 Trolley no. 53 plastic 00535 35 Glass door clamp 70 mm long, for 8 mm TSG 050070002023 35 80 mm long, for 8 and 0 mm TSG 200700020 35 0 9 5 8 2 ~28 57 3 27 5 3 ~5,5 8 9 0,8 9,5 8 5 Door catcher no. 5 P zinc-plated/plastic 00500 35 Bottom guide plastic 20000030 35 25 0 20 39
HELM 53 Technical Specifications HELM 53 Wall mounting (with projection track and pelmetting) 9 9,5 5,5 3 Track no. 0 stock length 00050 0005 0005 3 cut length 00052 00053 00058 3 35, 0 5 3 2,5 27 2 ~22 ~5,5 9,5 02,3 8 8 Clip on pelmet clip on pelmet, stock length 0007 00078 3 clip on pelmet, cut length 00077 00079 3 9 Projection track Projection track, stock length 00350 00330 3 Projection track, cut length 003599 00399 3 Srew set - 0035 3 2 End caps 0037 00377 3 Seite 3 Trolley no. 53 plastic 00535 35 8 Glass door clamp 70 mm long, for 8 mm TSG 050070002023 35 80 mm long, for 8 and 0 mm TSG 200700020 35 0 20 5 Door catcher no. 5 P zinc-plated/plastic 00500 35 25 Bottom guide plastic 20000030 35 0
HELM 53
HELM 73 up to 80 kg leaf weight 5 3 2 use of SmartStop possible Track no. 0 aluminium, aluminium or, in stock lengths of 000 mm or cut to size, for ceiling mounting, drilled holes approx. every 300-350 mm stock length 00050 cut length 00052 stock length 0005 cut length 00053 stock length 0005 cut length 00058 aluminium, aluminium or, in stock lengths of 000 mm or cut to size, for wall mounting with lateral drilled holes stock length, drilled holes on the side cut length, drilled holes on the side stock length, drilled holes on the side cut length, drilled holes on the side 00000 000 000700 00070 2
HELM 73 up to 80 kg leaf weight 2 Mounting parts wall mounting bracket no. /0 with fixed bolt, zinc-plated zinc-plated 00 ceiling plate no. /02 with fixed bolt, zinc-plated zinc-plated 002 HELM 73 3 Trolley no. 73 double pair with ball bearing, roller body white, without flange, support screw zinc-plated plastic 00735 Glass door clamp for 8 and 0 mm tempered safety glass, aluminium, 80 mm long with T-section 80 mm long, for 8 and 0 mm tempered safety glass 80 mm long, for 2 mm tempered safety glass 200700020 2007000205 0 2 27 80 5 Door catcher no. 5 P zinc-plated, plastic zinc-plated/plastic 00500 Bottom guide no. 20 aluminium adjustable for 8, 0 and 2 mm black 2000003008 2000003009 200000300 7 Bottom end stop no. 200 aluminium, adjustable for 8, 0 and 2 mm black 200000000 2000000002 2000000003 More accessories for HELM 73 from page 3
HELM 73 Accessories Accessories for HELM 73 7 Pelmet for glass door clamps aluminium silver anodised Set pelmet, up to 500 mm door width, for 2 mm TSG Set pelmet, from 500 mm up to 3000 mm door width, for 2 mm TSG Set pelmet, up to 500 mm door width, for 8 and 0 mm TSG Set pelmet, from 500 mm up to 3000 mm door width, for 8 and 0 mm TSG 2007000202 2007000203 200700020 2007000205 9,5 53 2,5 8 Clip-on pelmet aluminium or finish anodised, in stock lengths of 000 mm or cut to size. The pelmet can be used on one side in case of wall mounting or on both sides in case of ceiling mounting. The end caps are to be picked accordingly. clip-on pelmet, stock length clip-on pelmet, cut length 2 end caps for the one-sided pelmet 9,5 x mm 2 end caps for the two-sided pelmetting 9,5 x 53 mm clip-on pelmet, stock length 0007 00077 00082 00083 00078 clip-on pelmet, cut length 00079 2 end caps for one-sided pelmetting 9,5 x mm 0008 2 end caps for both-sided pelmetting 9,5 x 53 mm 00085 9 HELM projection track for pelmetting aluminium silver anodised The projection track is used in combination with track 0 with holes for ceiling mounting. projection track, 00350 000 mm stock length projection track, cut length per metre 003599 screw connection kit includes: 8 U adhesive discs M5 8 U hexagonal nuts M5 0035 8 hexagonal socket head screws M5 x 0 mm HELM projection track for pelmetting aluminium The projection track is used in combination with track 0 with holes for ceiling mounting. projection track, 00330 000 mm stock length projection track, cut length per metre 003399 screw connection kit includes: 8 U adhesive discs M5 8 U hexagonal nuts M5 0035 8 hexagonal socket head screws M5 x 0 mm HELM end cap for projection track for glass pelmets 5 x 02 x 2,5 mm 2 end caps, 0037 2 end caps, 00377
HELM 73 Accessories Accessories for HELM 73 0 HELM spacer profile aluminium The spacer profile is used in combination with track no. 0 with holes on the side for wall mounting. spacer profile, 000 mm stock length, spacer profile, cut length per metre spacer profile, 000 mm stock length, spacer profile, cut length per metre, 00370 003799 00390 003999 HELM 73 HELM end cap for spacer profile for glass pelmets, 5,5 x 9,5 x 2,5 mm 2 end caps, 00378 2 end caps, finish anodised 00379 HELM end cap for spacer profile double-sided for glass pelmets, 72 x 9,5 x 2,5 mm 2 end caps, 0037 2 end caps, 00375 HELM end cap for projection track in connection with spacer profile 2 end caps, 00380 2 end caps, 0038 for glass pelmets x 02 x 2,5 mm Single components for double doors synchronised Synchronised* kit for double door synchronised 007325 2 deflection rollers coupling joint for tooth belt tooth belt clamp support screws M8 x 5 (without tooth belt) 2 Tooth belt sold by metre, black tooth belt, sold by metre 00000700 calculation: tooth belt length = 2 x track length + 20 mm *Attention: Due to the installation conditions of the two deflection rollers the track has to be extended on both sides by 5 mm. If there is a fixed pane (side part), the track/pane has to be extended by 5 mm on each side as well. More accessories for HELM 73 from page 5
HELM 73 Accessories Accessories for HELM 73 - Sets 3 use of SmartStop possible HELM 73 silver finish To suit a single glass door up to 80 kg, door thickness 8 and 0 mm tempered/laminated safety glass cover caps* rounded Description 2 trolleys no. 73 cover caps no. 73 round (TSG/LSG) 2 flange incl. mounting material and support screws M8 x 55 mm 2 door stops no. 5 P bottom guide no. 20 to suite 8-2 mm For double doors two sets are required. 007390 not suitable with clip on pelmet use of SmartStop possible HELM 73 finish To suit a single glass door up to 80 kg, door thickness 8 and 0 mm tempered/laminated safety glass cover caps* rounded Description 2 trolleys no. 73 cover caps no. 73 round (TSG/LSG) 2 flange incl. mounting material and support screws M8 x 55 mm 2 door stops no. 5 P bottom guide no. 20 to suite 8-2 mm For double doors two sets are required. 0073902 not suitable with clip on pelmet use of SmartStop possible HELM 73 silver finish To suit a single glass door up to 80 kg, door thickness 8 and 0 mm tempered/laminated safety glass cover caps* square Description 2 trolleys no. 73 cover caps no. 73 squere (TSG/LSG) 2 flange incl. mounting material and support screws M8 x 55 mm 2 door stops no. 5 P bottom guide no. 20 to suite 8-2 mm For double doors two sets are required. 0073903 not suitable with clip on pelmet use of SmartStop possible HELM 73 finish To suit a single glass door up to 80 kg, door thickness 8 and 0 mm tempered/laminated safety glass cover caps* square Description 2 trolleys no. 73 cover caps no. 73 squere (TSG/LSG) 2 flange incl. mounting material and support screws M8 x 55 mm 2 door stops no. 5 P bottom guide no. 20 to suite 8-2 mm For double doors two sets are required. 007390 not suitable with clip on pelmet *Attention: Cover caps made of plastic, enameled in colour tone of and More accessories for HELM 73 from page 7
HELM 73 Accessories Accessories for HELM 73 SmartStop Damper and soft closing device integrated in the track up to 80 kg leaf weight Spring-loaded door piston Door piston for pocket door installation piece SmartStop 007350 upgrade kit one-sided with SmartStop and Trolley no. 73 00735 without guide upgrade kit one-sided with 2 SmartStops and 2 Trolleys no. 73 007352 without guide piece door piston / plastic 0080 tested according to DIN 527:998 200.000 cycles HELM 73 Accessories holding fixture for HELM 73 HELM holding fixture aluminium For the connection with fixed pane glass Description holding fixture for glass fixed panel stock length 000 mm holding fixture for glass fixed panel cut length kit (2 pieces) end caps for track with glass fixed panel 0009 00095 0009 U pelmet, stock length 000 mm 005850 U pelmet, cut to length 00585 aluminium stainless steel For the connection with fixed pane glass Description holding fixture for glass fixed panel stock length 000 mm holding fixture for glass fixed panel cut length kit (2 pieces) end caps for track with glass fixed panel 00097 00098 00099 U pelmet, stock length 000 mm 00580 U pelmet, cut to length 0058 5 Bottom guide profile for side panel in stock lengths of 000 mm or cut to size, aluminium or finish anodised stock length 005770 cut length 00577 stock length 005772 cut length 005773 More accessories, flush and pull handles, from page 7
HELM 73 Technical Specifications HELM 73 53 Wall mounting, with wall mounting bracket no. /0 Track no. 0 stock length 00050 0005 0005 2 cut length 00052 00053 00058 2 2 Wall mounting bracket no. 0/0 2 5 3 zinc-plated 00 3 3 Trolley no. 73 plastic 00735 3 Glass door clamp 80 mm long, for 8 and 0 mm TSG 200700020 3 80 mm long, for 2 mm TSG 2007000205 3 5 Door catcher no. 5 P zinc-plated/plastic 00500 3 7 Bottom Guide black Aluminium bottom end stop no. 200 200000000 2000000002 2000000003 3 Aluminium bottom guide no. 20 2000003008 2000003009 200000300 3 7 Pelmet for glass door clamps 2007000202 HELM 73 Wall mounting, track with drilled holes on the side and one-sided pelmetting 2 3 Track no. 0 stock length, drilled holes on the side 00000 000700 2 cut length, drilled holes on the side 000 00070 2 33,3 9 5 3 8 Clip on pelmet clip on pelmet, stock length 0007 00078 clip on pelmet, cut length 00077 00079 2 end caps, one-sided 00082 0008 9+8 27 9,5 93,3 3 Trolley no. 73 plastic 00735 3 0 2 ~5 Glass door clamp 80 mm long, for 8 and 0 mm TSG 200700020 3 80 mm long, for 2 mm TSG 2007000205 3 5 Door catcher no. 5 P 0[8] 0 25 8 zinc-plated/plastic 00500 3 Bottom Guide black Aluminium bottom end stop no. 200 200000000 2000000002 2000000003 3 Aluminium bottom guide no. 20 2000003008 2000003009 200000300 3 33 8
HELM 73 Technical Specifications HELM 73 53 Ceiling mounting, with pelmetting on both sides Track no. 0 stock length 00050 0005 0005 2 cut length 00052 00053 00058 2 53 3 8 Clip on pelmet 2x clip on pelmet, stock length 0007 00078 2x clip on pelmet, cut length 00077 00079 2 end caps, one-sided 00083 00085 3 Trolley no. 73 plastic 00735 3 0 9+8 33,3 27 3 5 9,5 93,3 HELM 73 Glass door clamp 80 mm long, for 8 and 0 mm TSG 200700020 3 80 mm long, for 2 mm TSG 2007000205 3 2 ~5 5 Door catcher no. 5 P zinc-plated/plastic 00500 3 Bottom Guide black Aluminium bottom end stop no. 200 200000000 2000000002 2000000003 3 Aluminium bottom guide no. 20 2000003008 2000003009 200000300 3 8 0[8] 0 25 8 33 HELM 73 Wall mounting, track with drilled holes on the side, spacer profile and one-sided pelmetting Track no. 0 stock length, drilled holes on the side 00000 000700 2 cut length, drilled holes on the side 000 00070 2 0 5 57 3 8 Clip on pelmet clip on pelmet, stock length 0007 00078 clip on pelmet, cut length 00077 00079 0 Spacer profile spacer profile, stock length 00370 00390 5 spacer profile, cut length 003799 003999 5 2 end caps, one-sided 00378 00379 5 5 2 8 27 5 3,8 3 0 9,5 3 Trolley no. 73 plastic 00735 3 Glass door clamp ~2[27] ~5 80 mm long, for 8 and 0 mm TSG 200700020 3 80 mm long, for 2 mm TSG 2007000205 3 0[8] 5 Door catcher no. 5 P zinc-plated/plastic 00500 3 25 Bottom Guide black Aluminium bottom end stop no. 200 200000000 2000000002 2000000003 3 Aluminium bottom guide no. 20 2000003008 2000003009 200000300 3 33 0 9
HELM 73 Technical Specifications HELM 73 53 Wall mounting (with projection track and pelmetting) 9 9,5 5,5 3 Track no. 0 stock length 00050 0005 0005 2 cut length 00052 00053 00058 2 37, 3 0 2,5 2 27 3 5 9,5 02,3 8 Clip on pelmet clip on pelmet, stock length 0007 00078 clip on pelmet, cut length 00077 00079 9 Projection track Projection track, stock length 00350 00330 Projection track, cut length 003599 003399 Srew set - 0035 2 End caps 0037 00377 ~2[22] ~5 0[8] 8 3 Trolley no. 73 plastic 00735 3 Glass door clamp 80 mm long, for 8 and 0 mm TSG 200700020 3 80 mm long, for 2 mm TSG 2007000205 3 5 Door catcher no. 5 P zinc-plated/plastic 00500 3 33 0 25 Bottom Guide black Aluminium bottom end stop no. 200 200000000 2000000002 2000000003 3 Aluminium bottom guide no. 20 2000003008 2000003009 200000300 3 HELM 73 Synchronised, track with drilled holes on the side and one-sided pelmetting 0 0 50,8 2 3,8 72 5 3 5 ~2[28] 27 33 7,5 2,5 ~20 0[8] 3 2 0 0 25 9,5 93,3 8 3 Track no. 0 stock length, drilled holes on the side 00000 000700 2 cut length, drilled holes on the side 000 00070 2 Trolley no. 73 plastic 00735 3 Glass door clamp 80 mm long, for 8 and 0 mm TSG 200700020 3 80 mm long, for 2 mm TSG 2007000205 3 8 Clip on pelmet clip on pelmet, stock length 0007 00078 clip on pelmet, cut length 00077 00079 0 Spacer profile 2x spacer profile, stock length 00370 00078 5 2x spacer profile, cut length 003799 00079 5 End caps f. spacer profile, double-sided 0037 00375 5 HELM 73 Synchronised Set 007325 5 optains: 2 deflection rollers, coupling joint for tooth belt, tooth belt clamp, support screws M8 x 5 2 Tooth belt (sold by metre) 00000700 Calculation for synchronised: tooth belt length = 2 x track length + 20 mm Bottom Guide black Aluminium bottom end stop no. 200 200000000 2000000002 2000000003 3 Aluminium bottom guide no. 20 2000003008 2000003009 200000300 3 50
HELM 73 Technical Specifications HELM 73 53 Ceiling mounting, with pelmetting on both sides (Flange for TSG/LSG glass) Track no. 0 stock length 00050 0005 0005 2 cut length 00052 00053 00058 2 3 Set HELM 73 End cap rounded 007390 0073902 End cap squere 0073903 007390 Set optains: 2 trolley no. 73 cover caps (ESG/VSG), 2 flange incl. mounting material and support screw M8 x 55 mm 2 door stop no. 5 P, bottom guide no. 20 (8-2 mm) For double doors two sets are required. 3 HELM 73 Bottom Guide black Aluminium bottom end stop no. 200 200000000 2000000002 2000000003 3 Aluminium bottom guide no. 20* 2000003008 2000003009 200000300 3 * Included in set HELM 73 Ceiling mounting, with holding fixture for glass fixed panel Position up to same as HELM 73, Wall mounting, with wall mounting bracket no. /0* 8 Clip on pelmet clip on pelmet, stock length 0007 00078 clip on pelmet, cut length 00077 00079 5 Holding fixture (with u-pelmet) Holding fixture, stock length 0009 00097 7 Holding fixture, cut length 00095 00098 7 2 End caps 0009 00099 7 U-pelmet, stock length 005850 00580 7 U-pelmet, cut length 00585 0058 7 5 U-Track for side panel stock lenght 005770 005772 7 cut lenght 00577 005773 7 3 8 * Please see page 8 5 5
HELM 20 and HELM 50 52
HELM 20 and HELM 50 HELM 20 up to 20 kg leaf weight Track aluminium with drilled holes for ceiling mounting in stock lengths of 000 mm or cut to size Trolley double pair, with ball bearings Realisable constructions manual synchronised opening single and multiple leaf constructions clip-on pelmet HELM 20 and HELM 50 Note: The design of pelmet and cover caps requires the pelmet to be longer (7 mm) than the track. tested according to DIN 527:998 00.000 cycles Further information from page 5 HELM 50 up to 50 kg leaf weight Track aluminium with drilled holes for ceiling mounting in stock lengths of 000 mm or cut to size Trolley double pair, with ball bearings Realisable constructions manual single and multiple leaf constructions tested according to DIN 527:998 00.000 cycles Further information from page 2 53
HELM 20 up to 20 kg leaf weight 5 3 2 7 Track no. 20 aluminium, in stock lengths of 000 mm or cut to size, drilled approx. every 200 mm stock length 2002000000 cut length 2002000000 2 Wall mounting bracket no. 20-0 aluminium, including locking screw, (fixing spacing: every 00 mm) aluminium 20000000 3 Trolley no. 20 plastic/, with precision ball bearing, support screw: stainless steel M8x5 plastic/ 200500900 5
HELM 20 up to 20 kg leaf weight Glass door clamps for 8, 0 and 2 mm tempered safety glass, aluminium, 80 mm with T-section 80 mm long, for 8 and 0 mm tempered safety glass 80 mm long, for 2 mm tempered safety glass 200700020 2007000202 5 Door catcher no. 20 P /plastic, door catcher force adjustable plastic/ 200000002 HELM 20 Bottom guide no. 20 aluminium adjustable for 8, 0 and 2 mm tempered safety glass black 2000003008 2000003009 200000300 7 Bottom end stop no. 200 aluminium adjustable for 8, 0 and 2 mm tempered safety glass black 200000000 2000000002 2000000003 More accessories for HELM 20 from page 5 55
HELM 20 Accessories 9 7 8 Pelmets for HELM 20 7 Adapter piece no. 20 aluminium for pelmet no. 50 W/D, every 700 mm aluminium 20002300 8 Pelmets no. 50 W for wall mounting, aluminium or aluminium, in mill lengths of 000 mm or cut to size stock length 500003020 cut length 500003022 stock length 500003007 cut length 500003009 9 End cap no. 50 W for wall mounting, aluminium or RAL 7035 (light grey) aluminium /left 5000502 aluminium /right 50005025 light grey/left 500050 light grey/right 5000502 Note: The design of pelmet and cover caps requires the pelmet to be longer (7 mm) than the track. 5
HELM 20 Accessories 8 Pelmet no. 50 D for ceiling mounting, aluminium or aluminium, in mill lengths of 000 mm or cut to size stock length 50000302 cut length 500003023 stock length 500003008 cut length 50000300 9 End cap no. 50 D for ceiling mounting, aluminium or RAL 7035 (light grey) aluminium /left 50005029 aluminium /right 50005030 light grey/left 50005027 light grey/right 50005028 Note: The design of pelmet and cover caps requires the pelmet to be longer (7 mm) than the track. HELM 20 More accessories for HELM 20 from page 58 57
HELM 20 Accessories Pelmet for glass door clamps 0 Pelmet for door clamps aluminium Set pelmet, up to 500 mm door width, for 2 mm TSG Set pelmet, from 500 mm up to 3000 mm door width, for 2 mm TSG Set pelmet, up to 500 mm door width, for 8 and 0 mm TSG Set pelmet, from 500 mm up to 3000 mm door width, for 8 and 0 mm TSG 2007000202 2007000203 200700020 2007000205 Single parts for double door synchronised Synchronised kit for double door synchronised 200022023 2 deflection rollers coupling joint for tooth belt tooth belt clamp support screws M8 x 70 (without tooth belt) 2 Tooth belt sold by metre, black tooth belt, sold by metre 00000700 calculation: tooth belt length = 2 x track length + 20 mm More accessories, flush and pull handles, from page 58
HELM 20 Technical Specifications HELM 20, 53 with wall mounting brackets no. 20/0 and pelmetting of the door clamps Track no. 20 stock length 2002000000 5 cut length 2002000000 5 2 Wall mounting bracket no. 20/0 zinc-plated 20000000 5 2 5 3 Trolley no. 20 plastic/ 200500900 5 Glass door clamps 80 mm long, for 8 and 0 mm TSG 200700020 55 80 mm long, for 2 mm TSG 2007000202 55 3 HELM 20 5 Door catcher no. 20 P plastic/ 200000002 55 Bottom Guide black Aluminium bottom end stop no. 200 200000000 2000000002 2000000003 55 Aluminium bottom guide no. 20 2000003008 2000003009 200000300 55 0 Pelmet for glass door clamps 2007000202 58 0 HELM 20, with wall mounting brackets no. 20/0 and pelmetting 2 Track no. 20 stock length 2002000000 5 cut length 2002000000 5 Wall mounting bracket no. 20/0 zinc-plated 20000000 5 2 53,5 3 3 Trolley no. 20 plastic/ 200500900 5 Glass door clamps 80 mm long, for 8 and 0 mm TSG 200700020 55 80 mm long, for 2 mm TSG 2007000202 55 0 5 3 7 25 5 Door catcher no. 20 P plastic/ 200000002 55,5+5 27 9 0 Bottom Guide black Aluminium bottom end stop no. 200 200000000 2000000002 2000000003 55 Aluminium bottom guide no. 20 2000003008 2000003009 200000300 55 0 ~29 8 7 Adapter piece no. 20 20002300 5 8 Pelmets/End caps no. 50 W light grey Pelmet no. 50 W, stock length 500003020 500003007 5 Pelmet no. 50 W, cut length 500003022 500003009 5 End cap no. 50 W, left 5000502 500050 5 End cap no. 50 W, right 50005025 5000502 5 33 0 25 59
HELM 20 Technical Specifications HELM 20, 53 ceiling mounting and pelmetting 0 5,5+5 53,5 3 3 7 27 2 0 0 ~29 93,5 9 3 5 7 Track no. 20 stock length 2002000000 5 cut length 2002000000 5 Trolley no. 20 plastic/ 200500900 5 Glass door clamps 80 mm long, for 8 and 0 mm TSG 200700020 55 80 mm long, for 2 mm TSG 2007000202 55 Door catcher no. 20 P plastic/ 200000002 55 Bottom Guide black Aluminium bottom end stop no. 200 200000000 2000000002 2000000003 55 Aluminium bottom guide no. 20 2000003008 2000003009 200000300 55 Adapter piece no. 20 20002300 5 33 0 25 9 Pelmets/End caps no. 50 D light grey Pelmet no. 50 D, stock length 50000302 500003008 57 Pelmet no. 50 D, cut length 500003023 50000300 57 End cap no. 50 D, left 50005029 50005027 57 End cap no. 50 D, right 50005030 50005028 57 HELM 20, synchronised 3 Track no. 20 stock length 2002000000 5 cut length 2002000000 5 2 5 0 30+5 3 Trolley no. 20 plastic/ 200500900 5 Glass door clamps 80 mm long, for 8 and 0 mm TSG 200700020 55 80 mm long, for 2 mm TSG 2007000202 55 3 ~2 27 ~2 0 33 2 0 25 0 5 Door catcher no. 20 P plastic/ 200000002 55 Bottom Guide black Aluminium bottom end stop no. 200 200000000 2000000002 2000000003 55 Aluminium bottom guide no. 20 2000003008 2000003009 200000300 55 optains: 2 deflection rollers coupling joint for tooth belt tooth belt clamp support screws M8 x 70 2 Tooth belt (sold by metre) 00000700 58 HELM 73 Synchronised kit for double doors synchronised 200022023 58 Calculation for syncronised: tooth belt length = 2 x track length - 20 mm 0
HELM 20
HELM 50 up to 50 kg leaf weight 5 3 2 7 Track no. 50 aluminium, in stock lengths of 000 mm or cut to size, drilled approx. every 200 mm (fixing spacing: every 00 mm) stock length 5002000000 cut length 5002000000 track no. 50, 00 mm for door widths of 70-900 mm 5002000003 track no. 50, 200 mm for door widths of 80-000 mm 500200000 track no. 50, 2500 mm for door widths of 00-200 mm 5002000005 track no. 50, 3000 mm for door widths of 20-500 mm 500200000 track no. 50, 3300 mm for door widths of 50-800 mm 5002000007 Track connector no. 50-03 aluminium Note: for one track connection 2 pieces track connectors are required. aluminium 5003000300 2
HELM 50 up to 50 kg leaf weight 2 Mounting parts wall mounting bracket no. 50-0, aluminium casting material, with stainless special steel screws, nut and serrated lock washers (fixingspacing: every 00 mm) piece aluminium 50000000 7 pieces aluminium 500000002 Ceiling plate no. 50-02 aluminium casting material, with stainless special steel screws, nut and serrated lock washers (fixingspacing: every 00 mm) piece aluminium 500000200 7 pieces aluminium 5000002002 HELM 50 3 Trolley no. 50 plastic/, with precision ball bearing, support screw: stainless steel M0x55 plastic/ 500500900 Glass door clamps for 8, 0 and 2 mm tempered safety glass, aluminium, 80 mm long 80 mm long, for 8 mm tempered safety glass 80 mm long, for 0 mm tempered safety glass 80 mm long, for 2 mm tempered safety glass 5007000202 5007000202 50070002025 5 Door catcher no. 50 P plastic/, Door catcher force adjustable plastic/ 500000002 Bottom guide no. 20 aluminium adjustable for 8, 0 and 2 mm black 2000003008 2000003009 200000300 Bottom end stop no. 200 aluminium, adjustable for 8, 0 and 2 mm black 200000000 2000000002 2000000003 More accessories, flush and pull handles, from page 3
HELM 50 Technical Specifications HELM 50, 53 with wall mounting brackets no. 50/0 25 2 Track no. 50 stock length 5002000200 2 cut length 5002000200 2 5 +2 2 Wall mounting bracket no. 50/0 zinc-plated 50000000 3 3 Trolley no. 50 plastic/ 500500900 3 27 3 Glass door clamp 80 mm long, for 8 mm ESG 5007000202 3 80 mm long, for 0 mm ESG 5007000202 3 80 mm long, for 2 mm ESG 50070002025 3 0 33 52 5 Door catcher no. 50 P plastic/ 500000002 3 Bottom Guide black Aluminium bottom end stop no. 200 200000000 2000000002 2000000003 3 Aluminium bottom guide no. 20 2000003008 2000003009 200000300 3 0 25 33
HELM 50 5
Hardware for Sliding Doors (Glass) Flush and Pull Handles
Hardware for Sliding Doors (Glass) Flush and Pull Handles Flush handles brushed for glass sliding doors of 8-2 mm glass thickness Flush and Pull Handles Further information from page 8 Pull handles brushed as a pair for two-sided operation and as piece for one-sided operation Further information from page 8 7
Hardware for Sliding Doors (Glass) Flush and Pull Handles KWS Flush Handles KWS 5250.. Ø 5 mm sliding door flushpull for glass doors 8-2 mm Outer rings of light metal, brass or, inner part of light metal anodised aluminium machined according to E KWS 5250. KWS 2 nickel silver nodised 5250.2 brass brushed 5250.2 polished 5250. brushed 5250.82 polished 5250.83 KWS 520.. 5 x 5 mm Sliding door flush handle for glass doors 8-0 mm x adhesive tape brushed 520.82 KWS Pull Handles KWS 870.. as a pair for two-sided operation and as piece for one-sided operation For more finishes and the relevant fixing material please request the brochure "Pull Handles and Accessories". brushed 870.82 D L H Ø 25 from 200 75 8
Hardware for Sliding Doors (Glass) Flush and Pull Handles KWS Pull Handles KWS 879.. as a pair for two-sided operation and as piece for one-sided operation For more finishes and the relevant fixing material please request the brochure "Pull handles and Accessories". brushed 879.82 D H TL Supports Ø 30 80 from 200 Ø 25 TL Flush and Pull Handles KWS 8525.. Handle bar of 30 x 30 x 2 mm Handle supports of aluminium, as a pair for two-sided operation and as piece for one-sided operation brushed 8525.82 TL L H 00 300 80 500 00 80 TL For more finishes and the relevant fixing material please request the brochure "Pull Handles and Accessories". KWS 8537.. Handle bar of 0 x 0 mm Handle supports of aluminium, as a pair for two-sided operation and as piece for one-sided operation brushed 8537.82 TL L H 00 300 0 500 00 0 TL For more finishes and the relevant fixing material please request the brochure "Pull Handles and Accessories". 9
Hardware for Sliding Doors (Glass) Sample of Request for Proposal Sample of Request for Proposal sets HELM GT-L 0 Installation type: single leaf installation (see illustration below) Leaf width: 900 mm Glass thickness: 0 mm Leaf weight 0 kg Track mounting: ceiling mounting Accessories: flush handle KWS 520 Side panel: no damper and soft closing device: yes Installation types single leaf construction Two leaves run in one track profile and can: be moved independently of each other be moved simultaneously in opposite directions (synchronised) 70
Hardware for Sliding Doors (Glass) Enquiry Form Woelm GmbH I Hasselbecker Str. 2- I D - 2579 Heiligenhaus I Tel.: + 9 (0) 20 5-8 - 0 I Fax: + 9 (0) 20 5-8 - 2 Required information for glass sliding doors Company Telephone Name Fax Street Postcode/city E-mail Contact person Supply exclusively through specialised trade. Please indicate your specialist dealer if appropriate: Order Enquiry Required information: Hardware: Installation type: Leaf width: mm Leaf weight kg Leaf thickness: mm Side panel: yes no tempered safety glass LSG Appendix Track mounting: ceiling mounting wall mounting Track pelmetting: Additional accessories: damper and soft closing device: KWS handles Other 7
HELM Range TEH_0 TEH_02H TEH_02G TEH_02D TEH_0 TEH_09 TEH_ TEH_2 TEH_0 Hardware for Sliding Wardrobe Doors Hardware for Sliding Doors (Timber) Hardware for Sliding Doors (Glass) Design Hardware for Sliding Doors (Timber and Glass) Hardware for Sliding Gates Hardware for Gateway Gates Hardware for Curtains and Tarpaulins Safety Equipment against Falls from a Height (PSE) Hardware for Sliding Shutters TEH_0 TEH_02H TEH_02G TEH_02D TEH_0 TEH_09 TEH_ TEH_2 TEH_0 KWS Range TEK_002 TEK_0308 TEK_050 TEK_007 Door Holders and Door Stops Pull Handles, Door Handles and Accessories Flush Handles and Locks Hardware for Handrails, Floor Rails, Coat Racks and Toilet Partition Walls TEK_002 TEK_0308 TEK_050 TEK_007 The technical specifications are up-to-date. We reserve the right to make modifications with regard to design and styling which serve the purpose of technical improvement. We appreciate your understanding that we assume no liability for any typing errors or any other errors. The reproduction of this document, in extracts or complete, is not permitted without our express written permission. This catalogue supersedes all previous catalogues. Woelm GmbH Hasselbecker Str. 2- D - 2579 Heiligenhaus Phone: + 9 (0) 20 5-8 - 0 Telefax: + 9 (0) 20 5-8 - 2 www.helmkws.de contact@woelm.de Woelm Austria GmbH Seewalchen 5a A - 520 Seekirchen Phone: + 3 (0) 2 2-25 02 Telefax: + 3 (0) 2 2-9 95 www.helmkws.at contact@woelm.co.at