Certificate : IECEx CSA 09.0001X Page 1 of 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com issue No.:4 Status: Current Date of Issue: 2011-02-08 Page 1 of 5 Certificate history: Issue No. 4 (2011-2-8) Issue No. 3 (2010-8-30) Issue No. 2 (2010-1-27) Issue No. 1 (2009-7-8) Issue No. 0 (2009-1-9) Applicant: Honeywell International Inc. 512 Virginia Drive Fort Washington, PA 19034 Electrical Apparatus: Optional accessory: XYR 6000 Wireless Transmitter Type of Protection: Ex ia IIB T4; Ex d [ia] IIB T4; Ex na [nl] IIC T4; DIP A20/A21/A22 IP 66 T90 C Marking: Manufacturers Name Model Number Serial Number Ex ia IIB T4 Ta = 70 C: DIP A20 IP66 T90 C Ex d [ia] IIB T4 Ta = 70 C: DIP A21 IP66 T90 C Ex na [nl] IIC T4 Ta = 84 C: DIP A22 IP66 T90 C Approved for issue on behalf of the IECEx Certification Body: Position: D R Stubbings BA MIET Technical Manager Signature: (for printed version) Date: 1. This certificate and schedule may only be reproduced in full. 2. This certificate is not transferable and remains the property of the issuing body. 3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website. Certificate issued by: CSA International 178 Rexdale Boulevard Toronto, Ontario M9W IR3 Canada and 1707-94th Street Edmonton, AB T6N 1E6 Canada
Certificate : IECEx CSA 09.0001X Page 2 of 5 Page 2 of 5 Manufacturer: Honeywell International Inc. 512 Virginia Drive Fort Washington, PA 19034 U.S.A. Manufacturing location(s): Honeywell International Inc. Honeywell Process Solutions 525 East Market Street York, PA 17403-1619 USA This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended. STANDARDS: The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards: IEC 60079-0 : 2004 Edition: 4.0 IEC 60079-1 : 2003 Edition: 5 IEC 60079-11 : 1999 Edition: 4 IEC 60079-15 : 2001 Edition: 2 IEC 61241-1-1 : 1999 Edition: 2 Electrical apparatus for explosive gas atmospheres - Part 0: General requirements Electrical apparatus for explosive gas atmospheres - Part 1: Flameproof enclosure 'd' Electrical apparatus for explosive gas atmospheres - Part 11: Intrinsic safety 'i' Electrical apparatus for explosive gas atmospheres - Part 15: Type of protection 'n' Electrical apparatus for use in the presence of combustible dust - Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation - Specification for apparatus This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above. TEST & ASSESSMENT REPORTS: A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in Test Report: CA/CSA/ExTR09.0001/00 CA/CSA/ExTR09.0001/01 CA/CSA/ExTR09.0001/02 CA/CSA/ExTR09.0001/03 CA/CSA/ExTR09.0001/04 Quality Assessment Report: NL/KEM/QAR07.0010/00 NL/KEM/QAR07.0010/01 NL/KEM/QAR07.0010/02
Certificate : IECEx CSA 09.0001X Page 3 of 5 Page 3 of 5 Schedule EQUIPMENT: Equipment and systems covered by this certificate are as follows: STDW924-abc-00000-def-g,h,i,3j-kkkk (1 bar Differential Pressure Transmitter), MWP 4500 psi (31 Mpa) STDW930-abc-00000-def-g,h,i,3j-kkkk (7 bar Differential Pressure Transmitter), MWP 4500 psi (31 Mpa) STDW974-abc-00000-def-g,h,i,3j-kkkk (210 bar Differential Pressure Transmitter), MWP 4500 psi (31 Mpa) STGW944-abc-00000-def-g,h,i,3j-kkkk (35 bar Gauge Pressure Transmitter), MWP 500 psi (3.5 Mpa) STGW974-abc-00000-def-g,h,i,3j-kkkk (210 bar Gauge Pressure Transmitter), MWP 3000 psi (20.7 Mpa) STGW94L-abc-00000-def-g,h,i,3j-kkkk (35 bar Gauge Pressure Transmitter), MWP 500 psi (3.5 Mpa) STGW97L-abc-00000-def-g,h,i,3j-kkkk (210 bar Gauge Pressure Transmitter), MWP 3000 psi (20.7 Mpa) STGW98L-abc-00000-def-g,h,i,3j-kkkk (415 bar Gauge Pressure Transmitter), MWP 6000 psi (41.4 Mpa) STGW99L-abc-00000-def-g,h,i,3j-kkkk (690 bar Gauge Pressure Transmitter), MWP 10000 psi (68.9 Mpa) STAW94L-abc-00000-def-g,h,i,3j-kkkk (35 bar Absolute Pressure Transmitter), MWP 500 psi (3.5 Mpa) CETW6000M-W-000-00000-fgghh-2e,jjjj (Wireless Corrosion Transmitter), -30 to 85 ºC CETW6000M-D-00000-fgghh-2e,jjjj (Corrosion Data Logger), -30 to 85 ºC Refer to EQUIPMENT (continued) for additional models CONDITIONS OF CERTIFICATION: YES as shown below: Parts of the antenna are non-conducting and the area of the non-conducting part exceeds the maximum permissible areas for Category II 1 G (Zone 0) according to IEC 60079-0. Therefore when the antenna is used within a potentially explosive atmosphere, appropriate measures must be taken to prevent electrostatic discharge. Impact and friction hazardous need to be considered according to IEC 60079-0 when the transmitter exposed to the exterior atmosphere is made of light metal alloys, and used in Category II 1 G (Zone 0).
Certificate : IECEx CSA 09.0001X Page 4 of 5 Page 4 of 5 EQUIPMENT(continued): STIW600-000-00000-abc-d,e,f,Cj-kkkk (Analog Input Transmitter) STTW400-000-00000-abc-d,e,f,Cj-kkkk (Temperature Transmitter w/remote sensor) STTW401-000-00000-abc-d,e,f,3j-kkkk (Temperature Transmitter With 2 Digital Inputs) STTW820-400-a,b,c-def-g0h0-2i-j-kkkk (Temperature Transmitter w/rigid sensor), MWP 3000 psi (20.5 Mpa) STTW830-400-a,b,c-def-g-h00-ijklm-Cn-p-qqqq (Temperature Transmitter w/threaded or socket weld) STTW840-400-abc-def-g-h00-ijklm-Cn-p-qqqq (Temperature Transmitter w/flanged spring loaded sensor), MWP 3000 psi (20.7 Mpa) STXW500-000-00000-abc-d,e,f,Cg-hhhh (Digital Input Transmitter With 3 Digital Inputs) STUW700-000-0000-abc-def-Cg-hhhh (Wireless Universal I/O Transmitter Three Inputs: 4-20 ma Analog, T/C's, mv, or DI (Switch)) STUW701-000-0000-abc-def-Cg-hhhh (Wireless Universal I/O Transmitter Two Inputs: 4-20 ma Analog, T/C, mv or DI and One Digital Output (Solid State))
Certificate : IECEx CSA 09.0001X Page 5 of 5 Page 5 of 5 DETAILS OF CERTIFICATE CHANGES (for issues 1 and above): Issue 1: Update to include digital input terminals - which creates Models STTW401 and STXW500. Issue 2: Update to include: - Addition of 24Vdc Power Supply PCB asembly option, P/N 50031428. - Addition of Models STUW700 and STUW701, Wireless Universal I/O Transmitters. - Revisions to existing drawings and to model code. Issue 3: Update to include removable battery pack. Issue 4: Update to include: - Revision to the Model code. - Addition of the Model STGW99L, 690 Bar Gauge Pressure Transmitter.