Because you want reliability, versatility, and value in one complete electronic control package

Similar documents
2009 Phason Inc. All rights reserved. Printed in Canada rev

User manual and installation guide

User manual and installation guide

User manual and installation guide

ECC-1 user manual and installation guide

ECC-1 user manual and installation guide

SSV-DC user manual. Phason

Static Pressure Control

flexibility programmed settings.

STARS SHOULD BE WELL LIT.

Swine & Poultry Ventilation - Controllers

EXPERT TRI-STAR. Temperature controller. User s Manual

Better Design, Better Control, Better Systems.

K-Controller Brochure.qxp_ Controller Brochure 2/27/17 3:03 PM Page 4 Versa IC Platform

TEC2620 Series Non-Programmable Fan Coil Network Thermostat Controller and Remote I/O Relay Packs

ACT2-CS Convenience Store Controller

Three Ventilation Stage Control. TVS user manual

Power Flame Incorporated

Hydronic & HVAC Control Systems

PARAGON Commercial Refrigeration Controls

CONTROLS THERMOSTATS Bulletin No November 2001 Supersedes September 2001 INNOVATOR PROGRAMMABLE THERMOSTATS ENGINEERING DATA

New Versa IC Platform

CommStat 6. Controller for Redundant HVAC Systems PRODUCT DATA SHEET

Centro-Matic Automated Lubrication Systems System Controls

Rotem One Touch. User Manual PRELIMINARY DOCUMENT. Ag/MIS/UmGB /18 Rev 1.0 P/N:

Transfer Switch Features

Temperature Controller CC24-7 UNIBOX USER S MANUAL Legion Dr. Mason, MI USA October 2010 Ph. (517) Fax (517)

DIESEL Engine Fire Pump Controllers Features

L CONNECTION NETWORK Commercial Controls

Electric Coils. Blower Coils. Product Information

Transfer Switch Features

Introduction. OM-THA2

THA2 TEMPERATURE/ HUMIDITY/ DEWPOINT ALARM WITH LOGGING CAPABILITY. 99 Washington Street Melrose, MA Phone Toll Free

REC-8R Environmental Control. Operation and Installation Manual

CommStat 4. Controller for Redundant Telecom HVAC Systems PRODUCT DATA SHEET. Features and Benefits

MODEL TSTAT THERMOSTATS THERMIDISTAT TM CONTROL ELECTRO-MECHANICAL THERMOSTATS FEATURES/BENEFITS NON-PROGRAMMABLE THERMOSTAT

OPERATION INSTRUCTIONS DEMAND DEFROST CONTROL BOARD MODEL FOR USE WITH MODELS: AFFINITY, ECHELON, ACCLIMATE HEAT PUMP SERIES

Evolution 3000 and 3001

Product Data TSTAT. Thermostats Thermidistat TM Control BUILDER S THERMOSTAT NON-PROGRAMMABLE THERMOSTAT FEATURES/BENEFITS

The ID51 & ID52 can be upgraded to 2 loops without the need to change back box. FEATURES. Intelligent Features

Element. Controller. Manual for use and maintenance. Element. Climate Controller. Ag/MIS/UMGB /17 Rev 1.0 P/N:

No part of this publication may be reproduced, stored in an automated data file or made public in any form or by any means, whether electronic,

THX-DL Data Logger USER & INSTALLATION MANUAL V

Feature Summary. I. System

AS950 REFRIGERATED SAMPLERS

Automatic Lamp & Mat Heating Control

The Kryos LN2 Liquid Level Control & Cryogenic Temperature Control

technical bulletin Control Link RSC Installation Instructions

INSTRUCTION MANUAL P Heating and 1 Cooling

Siemens Thermostats. RDY2000BN Thermostat

EKC 347 Liquid Level Controller REFRIGERATION AND AIR CONDITIONING. Manual

STEAMPAK Series BurnerPAK BMS Burner Management Systems

Platinum Touch/Rotem One Touch

User s Manual ELITE PROGRAMMABLE THERMOSTAT WITH MENU DRIVEN DISPLAY

OPERATING INSTRUCTIONS

0 C to 50 C ( 32 F to 122 F ) 0% to 95% R.H. non-condensing. 30 to 95% R.H. Dry contact across terminal BI1, BI2 & UI3 to Scom

Carbon Monoxide Transmitter

Controller Specification Sheet

FDF Foam Pump Controllers Features

TOUCHSCREEN. COMFORTSENSE Day Programmable Thermostat. 4 Heat / 2 Cool Universal Multi Stage MODEL NUMBER IDENTIFICATION L U FEATURES

ERV-24. Technician Settings & Operating Manual. Protected by one or more of the following patents: US 5,547,017; 5,881,806; 6,431,268; CA 2,245,135

CommStat 4 Controller

Nov 08 PRODUCT SPECIFICATION SHEET

MODEL TSTAT THERMOSTATS THERMIDISTAT TM CONTROL BUILDER S MODEL THERMOSTAT FEATURES/BENEFITS NON-PROGRAMMABLE THERMOSTAT

GB Art. Nr

VENSTAR T1070 FAN COIL THERMOSTAT PROGRAMMABLE 2 OR 4 PIPE SYSTEMS OWNER S MANUAL AND INSTALLATION INSTRUCTIONS

Ammonia Detection System Codes and Design Specifications

OT-FX2 OLED TOUCH for the FX II Touch control panel OPERATOR S MANUAL. Technicold Marine Systems

INSTRUCTION MANUAL P Heating and 2 Cooling with Humidification and De-humdification

DIESEL Engine Fire Pump Controllers Features

SYST0101CW Product Specifications

T-32-TS Touchscreen Thermostat. Installation Manual

T60xDFH-4 and T60xDFH-4+PIR Series Thermostat Controllers with Dehumidification and Occupancy Sensing Capability

OPERATION AND MAINTENANCE MANUAL ELC-810 AUTOMATIC WATER LEVEL CONTROLLER. AquatiControl Technology

SAPCON SMART-SSI. Continuous Speed Indicator. Users Manual. . Introduction. . General Description. . Principle of Operation. .

CONsOlIDATOR 4 & 8. MulTI- C h ANNEl CONTROllERs. ConsoliDator 4 Model PD940 ConsoliDator 4 Features. ConsoliDator 8 Features.

Installation Instructions / User s Manual TSTAT0406 and TSTAT0408

STAGED ENVIRONMENT CONTROL

Reduce lighting energy costs with controls

Frequently asked questions: Intelligent Transmitter Series

TOTAL SOLUTIONS. Liquid Level Control Product Guide. MATELEC AUSTRALIA innovative by design

Installation Instructions

CATALOGUE 2017 ELECTRICAL BOARDS FOR REFRIGERATION

Improve Performance and Reduce Maintenance Costs. Model Q45D. Dissolved Oxygen Monitor...

AS950 ALL-WEATHER REFRIGERATED SAMPLERS

MicroTech Unit Ventilator

Nitrogen Dioxide (NO2) Single-Point Gas Detection System

AD-1272 Advanced Thermal Dispersion Probe Airflow Measuring System

Product Manual SZ1022/SZ1031/SZ1035/

VENSTAR T1075 FAN COIL THERMOSTAT 7 DAY PROGRAMMABLE 2 OR 4 PIPE SYSTEMS OWNER S MANUAL AND INSTALLATION INSTRUCTIONS

AS950 PORTABLE SAMPLERS

PANELS, KEYPADS & MODULES. Take Fire Protection to the Next Level Fire Products from DSC

Auto-Changeover: A mode in which the thermostat will turn on the heating or cooling based on room temperature demand.

TYPE CM-2201 NELSON SINGLE POINT CIRCUIT MANAGEMENT SYSTEM

Pump-Up Controller MODEL 4062

Refrigeration Controller Operator s Manual (HRC) PO Box 6183 Kennewick, WA

Industrial Freezer Sales A division of IDS 5311 Derry Avenue Building D Agoura Hills CA Phone (818) Fax (818)

EL-TSTAT-8820 Safety & Installation Instructions

icomfort Residential Communicating Control System icomfort Touch Communicating Thermostat

DSGH. Radiation-Based Detector with GEN2000 Electronics for Density Measurement QUICK REFERENCE GUIDE

Transcription:

Because you want reliability, versatility, and value in one complete electronic control package

You told us what you needed......and we provided it CONFIGURATION Relay Stages 0 to 10V outputs Humidity Zone Powerful, versatile environmental control for your whole barn, building, or greenhouse The Supra has 4 variable stages for heating or cooling control and 12 relay stages for heating, cooling, actuator control, duty cycle, or timed events. You can set up and manage your unique control strategy using the Supra s keypad and easy-to-understand menu system. Feature list Relays Variable DC signal output MAIN MENU Settings Maintenance View Logs Security Configuration Diagnostics Factory Settings Slave unit capability Inlet actuator control Curtain control Tunnel ventilation mode Duty cycle and timed events Manual override Custom growth curves Four-zone temperatures Outdoor temperatures Humidity control Water use monitoring Programmable alarms De-icing start (VAR fans) Computer compatibility Upgradeable firmware Transferable settings CSA approval Two-year warranty Designed with quality and you in mind We designed the Supra so one unit can control an entire hog or dairy barn, poultry house, or greenhouse. For larger facilities, you can connect up to 32 Supras and operate them from a central computer using the powerful and convenient SupraWare software. Trustworthy, reliable performance over the whole productive life of the control The Supra, like every Phason control, was designed to our strict quality standards and is CSA certified. We test every Phason control yes, every unit we produce before it leaves our factory, ensuring it works as designed and you get the best product possible. Superior customer service and support MAINTENANCE Manual Override Calib. Actuator Set Clock Switch F/C Set Unit Name Set Main Display Hysteresis De-Icing Warnings TempProbe Motor Curves Averaging On/Off Averaging Setup Humidity Factor Startup Timer Restore Settings Save Settings Cost effectiveness, second to none VIEW LOGS Daily Log Alarm Log Audit Log Erase All Logs Year-after-year, our experts train all Phason dealers, and others in our value chain, to support the Supra and other Phason controls. We also offer Phason s own technical support and service hot line. All service bulletins, user manual updates, and other relevant information, are available on our website at www.phason.ca. This means you always have access to the latest and most accurate information available. DIAGNOSTICS Display Inputs Power Supply View rly stages Set rly stages View VAR Stages Set VAR Stages Change Version Force Reset The Supra s onboard diagnostics make sure important internal systems are working as intended. The Supra s easy-to-read user manual includes configuration and programming worksheets, as well as troubleshooting sections. The five-level PIN security system allows you the facility manager to prevent unauthorized changes to configurations and settings. We know of no other electronic control used for these or similar commercial purposes which provides so many important features and benefits for so modest an investment. SECURITY Security On/Off Change PIN Add User SETTINGS Remove User Group Setpoint Heat/Cool Stages One alarm relay (for external alarm siren or alarm system) Growth Curve Curtains Four-zone temperature monitoring and control Alarms Actuators Outdoor temperature monitoring ability Duty Cycle Timed Events Adjustable temperature settings, including two configurable seven-step Water Meter growth curves Humidity Control Temp Setback Temperature setback for day/night temperature (DIF) control Tunnel Mode More great features Water usage monitoring ability Humidity monitoring and control ability Startup timer for distributing backup generator initial startup load Three-second full-power-turn-on for minimizing fan ice-up Logging of temperatures, alarms, relay on durations, and setting changes Power-failure memory protection, including internal 24-hour clock Four-line, backlit LCD display Thirty-foot temperature probe, extendable to 500 feet (additional probes available) Rugged enclosure (corrosion and water resistant, fire retardant) Two-year limited warranty 4 12 Supra accessories make the Supra even more versatile Single-Phase Slave...increase the capacity of your Supra SupraWare...configure and monitor your Supras from a computer The Single-Phase Slave has a 20 A variable AC stage for controlling loads such as variablespeed fans or heat lamps. SupraWare eliminates the need to go to a control to check settings or make changes; you can do it all from one location. Connect up to 32 Supras together at distances up to 4000 feet (1220 metres). Installation is simple and there is no additional configuration required; all slave units follow the programs and settings of the Supra. Temperature probes are available in 1, 6, 30, 75, or 150-foot cable lengths and can extended up to 500 feet using extension cable. Extension cable is available in 500-foot lengths. Easy-to-read displays show control settings, temperatures, and alarms. SupraWare maintains logs of temperatures, alarms, and system changes. The software includes a viewer, four reports, and a chart to help you analyze your information. 120/230 VAC, 50/60 Hz 7 FLA at 120/230 VAC, PSC motor 1/2 HP at 120 VAC, 1 HP at 230 VAC, PSC motor Relay stages 1/3 HP at 120 VAC, 1/2 HP at 230 VAC 360 W tungsten at 120 VAC Alarm relay 0.4 A at 125 VAC; 2 A at 30 VDC, resistive load 0.2 A at 125 VAC; 1 A at 30 VDC, inductive load The Supra has four temperature probe connections for monitoring different zones or outdoor temperatures. Relative Humidity Sensors...monitor and control humidity Relative Humidity Sensors come in two models, standard (RHS), and extended (RHS-P). The RHS monitors relative humidity at the Supra. The RHS-P monitors up to 100 feet away from the Supra. Using remote-access software and a phone line or Internet connection, you can monitor and control your system from anywhere with an Internet connection. Input 115 VAC, 50/60 Hz, 1 A Input: Variable AC output: 20 A, 2300 W at 115 VAC Temperature probes and extension cable Remote-access Electrical ratings You can connect up to six Slave units to a single Supra. Variable DC Expansion Kit The Variable DC Expansion Kit is a small, auxiliary circuit board that allows you to connect equipment requiring a 0 to 10 V input, such as variable frequency drives or modulating valves. The kit connects to a socket on the Supra s main circuit board and installs in seconds. The kit has four outputs you can configure for cooling or heating. Intaglio and SupraSaver...innovative and easy-to-use The Intaglio allows you to upgrade a Supra s firmware in seconds and can upgrade all the Supras at your site. Phason constantly improves and adds new features to their products. With the Intaglio, you can upgrade the firmware in the Supra as these features become available. The SupraSaver allows you to store a complete copy of a Supra s configuration and settings. You can use the SupraSaver to set up new Supras in seconds! Phason power contactors Power contactor relay (PC-240) includes power contactor relay and mounting hardware for easy mounting in an enclosure. Power contactor kit (122-1) includes power contactor relay, on-off-auto switch and label, snubber filter (reduces electrical noise), and mounting hardware for easy mounting in an enclosure. Power contactor unit (129-0) includes two power contactor relays, two on-off-auto switches, and two snubber filters, mounted in a large enclosure. The enclosure has room for two additional contactor relays or kits. Phason power contactors have the following ratings. 10.2 ma at 240 VAC Coil: Contact: 25 A at 240 VAC; resistive 1300 W at 120 VAC; tungsten 1 HP at 120 VAC; 2 HP at 240 VAC, motor power factor 0.4 Power contactors increase the load handling capacity of relays and help increase the life of your control system.

I use two Supras in my double-wide tunnelventilated swine finishing building. Each Supra controls six pit fans, six tunnel fans, the tunnel curtain, ceiling inlets, and two heaters. It also provides evaporative cooling by operating the misters on a timer at high temperatures. When the Supra switches to tunnel mode, I have the option to switch off certain fans and close the ceiling inlets to maximize the cooling effect. Controlling everything from my Supras is convenient, gives me effective ventilation, and minimizes my electrical costs. Tom Dressel Medford, Minnesota Versatility and adaptability, the Supra has it! Swine applications In a naturally-ventilated hog building, use the Supra to control curtain machines, recirculation fans, heaters, and evaporative cooling equipment. Use the optional humidity sensor to reduce humidity accumulation by automatically adjusting ventilation within a set humidity range. In a tunnel ventilation building, use the Supra to control tunnel fans and curtains, pit fans, wall fans, ceiling inlets, and heaters. The Supra can close ceiling inlets or switch off wall fans when changing to tunnel mode. Use the Supra s timer function to control water misting for evaporative cooling. The optional humidity probe can automatically adjust the ventilation to reduce high humidity. In a typical power ventilation setup, use the Supra to control all fans, heaters, and actuatorcontrolled ceiling inlets. If you have lights or feed augers that need to be on at certain times, use the Supra to easily operate these. In a farrowing setup, use the Supra s variable stages to control the heat lamps. Greenhouse applications In a power or naturally-ventilated greenhouse, use the Supra to control motorized louvers and ridge vents and single-speed, two-speed, or variable-speed motors. During hot weather, use the Supra to automatically switch on the fan and water pump of an evaporative cooler at specific temperatures. For watering or misting plants, use the Supra s on/off cycle timer that you can program for certain times and/or temperatures. For greenhouses with separate temperature requirements, for example, ventilation and heated earth beds, use the Supra s fourzone feature that provides independent climate control for each zone. For applications using the DIF technique, use the Supra s temperature setback feature. For example, use setback to reduce the temperature of the greenhouse for two to three hours at dawn to control plant height and growth.

Supra works here... Turkey and other poultry applications In a naturally-ventilated turkey house, use the Supra to control curtain machines, recirculation fans, heaters, and evaporative cooling equipment. Use the optional humidity sensor to reduce humidity accumulation by automatically adjusting ventilation within a set humidity range. In a broiler or layer house with tunnel ventilation, use the Supra to control all fans and curtains, ceiling inlets, and heaters. The Supra can close ceiling inlets or switch off wall fans when changing to tunnel mode. Use the Supra s timer function to control water misting for evaporative cooling. Use the optional humidity sensor to reduce humidity accumulation by automatically adjusting ventilation within a set humidity range. For pullet rearing and egg production, I use the Supra to control my variable and single-speed fans and ceiling inlets. I use the timing feature to operate the feed system and lights at chosen times. Using multiple temperature probes lets me take advantage of the average room temperature and provides a backup if a probe fails. Another helpful feature I use is the Suprasaver. It acts as a backup for my settings and makes it easy to change settings on one Supra and then transfer them to another. Hermann Grauer Nature s Farm Steinbach, Manitoba Dairy applications In a tunnel ventilation facility, use the Supra to control curtain machines and heaters. Use the optional Variable DC Expansion Kit to control large variablefrequency drive fans. During hot weather, use the Supra to control evaporative cooling equipment, such as pumps and solenoids. Use the optional humidity sensor, to reduce humidity accumulation by automatically adjusting ventilation within a set humidity range. In a naturally-ventilated free-stall building, use the Supra to control curtain machines, mixing fans, and water misting for evaporative cooling. Since converting my natural ventilation freestall barn to an automatic system controlled by the Supra, I have seen improved milk production and no freezeups during winter. The Supra automatically adjusts variable frequency drive fans and inlet curtains, providing proper minimum ventilation and consistent temperature and air flow. On hot days, the Supra controls high-pressure fog cooling using its duty cycle timer. Automatically-controlled ventilation has proven to be a great improvement over manually controlled ventilation, and the Supra has the ability to make it happen. Bob Donahue Luckwaldt Farms Woodville, Wisconsin

You told us what you needed......and we provided it CONFIGURATION Relay Stages 0 to 10V outputs Humidity Zone Powerful, versatile environmental control for your whole barn, building, or greenhouse The Supra has 4 variable stages for heating or cooling control and 12 relay stages for heating, cooling, actuator control, duty cycle, or timed events. You can set up and manage your unique control strategy using the Supra s keypad and easy-to-understand menu system. Feature list Relays Variable DC signal output MAIN MENU Settings Maintenance View Logs Security Configuration Diagnostics Factory Settings Slave unit capability Inlet actuator control Curtain control Tunnel ventilation mode Duty cycle and timed events Manual override Custom growth curves Four-zone temperatures Outdoor temperatures Humidity control Water use monitoring Programmable alarms De-icing start (VAR fans) Computer compatibility Upgradeable firmware Transferable settings CSA approval Two-year warranty Designed with quality and you in mind We designed the Supra so one unit can control an entire hog or dairy barn, poultry house, or greenhouse. For larger facilities, you can connect up to 32 Supras and operate them from a central computer using the powerful and convenient SupraWare software. Trustworthy, reliable performance over the whole productive life of the control The Supra, like every Phason control, was designed to our strict quality standards and is CSA certified. We test every Phason control yes, every unit we produce before it leaves our factory, ensuring it works as designed and you get the best product possible. Superior customer service and support MAINTENANCE Manual Override Calib. Actuator Set Clock Switch F/C Set Unit Name Set Main Display Hysteresis De-Icing Warnings TempProbe Motor Curves Averaging On/Off Averaging Setup Humidity Factor Startup Timer Restore Settings Save Settings Cost effectiveness, second to none VIEW LOGS Daily Log Alarm Log Audit Log Erase All Logs Year-after-year, our experts train all Phason dealers, and others in our value chain, to support the Supra and other Phason controls. We also offer Phason s own technical support and service hot line. All service bulletins, user manual updates, and other relevant information, are available on our website at www.phason.ca. This means you always have access to the latest and most accurate information available. DIAGNOSTICS Display Inputs Power Supply View rly stages Set rly stages View VAR Stages Set VAR Stages Change Version Force Reset The Supra s onboard diagnostics make sure important internal systems are working as intended. The Supra s easy-to-read user manual includes configuration and programming worksheets, as well as troubleshooting sections. The five-level PIN security system allows you the facility manager to prevent unauthorized changes to configurations and settings. We know of no other electronic control used for these or similar commercial purposes which provides so many important features and benefits for so modest an investment. SECURITY Security On/Off Change PIN Add User SETTINGS Remove User Group Setpoint Heat/Cool Stages One alarm relay (for external alarm siren or alarm system) Growth Curve Curtains Four-zone temperature monitoring and control Alarms Actuators Outdoor temperature monitoring ability Duty Cycle Timed Events Adjustable temperature settings, including two configurable seven-step Water Meter growth curves Humidity Control Temp Setback Temperature setback for day/night temperature (DIF) control Tunnel Mode More great features Water usage monitoring ability Humidity monitoring and control ability Startup timer for distributing backup generator initial startup load Three-second full-power-turn-on for minimizing fan ice-up Logging of temperatures, alarms, relay on durations, and setting changes Power-failure memory protection, including internal 24-hour clock Four-line, backlit LCD display Thirty-foot temperature probe, extendable to 500 feet (additional probes available) Rugged enclosure (corrosion and water resistant, fire retardant) Two-year limited warranty 4 12 Supra accessories make the Supra even more versatile Single-Phase Slave...increase the capacity of your Supra SupraWare...configure and monitor your Supras from a computer The Single-Phase Slave has a 20 A variable AC stage for controlling loads such as variablespeed fans or heat lamps. SupraWare eliminates the need to go to a control to check settings or make changes; you can do it all from one location. Connect up to 32 Supras together at distances up to 4000 feet (1220 metres). Installation is simple and there is no additional configuration required; all slave units follow the programs and settings of the Supra. Temperature probes are available in 1, 6, 30, 75, or 150-foot cable lengths and can extended up to 500 feet using extension cable. Extension cable is available in 500-foot lengths. Easy-to-read displays show control settings, temperatures, and alarms. SupraWare maintains logs of temperatures, alarms, and system changes. The software includes a viewer, four reports, and a chart to help you analyze your information. 120/230 VAC, 50/60 Hz 7 FLA at 120/230 VAC, PSC motor 1/2 HP at 120 VAC, 1 HP at 230 VAC, PSC motor Relay stages 1/3 HP at 120 VAC, 1/2 HP at 230 VAC 360 W tungsten at 120 VAC Alarm relay 0.4 A at 125 VAC; 2 A at 30 VDC, resistive load 0.2 A at 125 VAC; 1 A at 30 VDC, inductive load The Supra has four temperature probe connections for monitoring different zones or outdoor temperatures. Relative Humidity Sensors...monitor and control humidity Relative Humidity Sensors come in two models, standard (RHS), and extended (RHS-P). The RHS monitors relative humidity at the Supra. The RHS-P monitors up to 100 feet away from the Supra. Using remote-access software and a phone line or Internet connection, you can monitor and control your system from anywhere with an Internet connection. Input 115 VAC, 50/60 Hz, 1 A Input: Variable AC output: 20 A, 2300 W at 115 VAC Temperature probes and extension cable Remote-access Electrical ratings You can connect up to six Slave units to a single Supra. Variable DC Expansion Kit The Variable DC Expansion Kit is a small, auxiliary circuit board that allows you to connect equipment requiring a 0 to 10 V input, such as variable frequency drives or modulating valves. The kit connects to a socket on the Supra s main circuit board and installs in seconds. The kit has four outputs you can configure for cooling or heating. Intaglio and SupraSaver...innovative and easy-to-use The Intaglio allows you to upgrade a Supra s firmware in seconds and can upgrade all the Supras at your site. Phason constantly improves and adds new features to their products. With the Intaglio, you can upgrade the firmware in the Supra as these features become available. The SupraSaver allows you to store a complete copy of a Supra s configuration and settings. You can use the SupraSaver to set up new Supras in seconds! Phason power contactors Power contactor relay (PC-240) includes power contactor relay and mounting hardware for easy mounting in an enclosure. Power contactor kit (122-1) includes power contactor relay, on-off-auto switch and label, snubber filter (reduces electrical noise), and mounting hardware for easy mounting in an enclosure. Power contactor unit (129-0) includes two power contactor relays, two on-off-auto switches, and two snubber filters, mounted in a large enclosure. The enclosure has room for two additional contactor relays or kits. Phason power contactors have the following ratings. 10.2 ma at 240 VAC Coil: Contact: 25 A at 240 VAC; resistive 1300 W at 120 VAC; tungsten 1 HP at 120 VAC; 2 HP at 240 VAC, motor power factor 0.4 Power contactors increase the load handling capacity of relays and help increase the life of your control system.

You told us what you needed......and we provided it CONFIGURATION Relay Stages 0 to 10V outputs Humidity Zone Powerful, versatile environmental control for your whole barn, building, or greenhouse The Supra has 4 variable stages for heating or cooling control and 12 relay stages for heating, cooling, actuator control, duty cycle, or timed events. You can set up and manage your unique control strategy using the Supra s keypad and easy-to-understand menu system. Feature list Relays Variable DC signal output MAIN MENU Settings Maintenance View Logs Security Configuration Diagnostics Factory Settings Slave unit capability Inlet actuator control Curtain control Tunnel ventilation mode Duty cycle and timed events Manual override Custom growth curves Four-zone temperatures Outdoor temperatures Humidity control Water use monitoring Programmable alarms De-icing start (VAR fans) Computer compatibility Upgradeable firmware Transferable settings CSA approval Two-year warranty Designed with quality and you in mind We designed the Supra so one unit can control an entire hog or dairy barn, poultry house, or greenhouse. For larger facilities, you can connect up to 32 Supras and operate them from a central computer using the powerful and convenient SupraWare software. Trustworthy, reliable performance over the whole productive life of the control The Supra, like every Phason control, was designed to our strict quality standards and is CSA certified. We test every Phason control yes, every unit we produce before it leaves our factory, ensuring it works as designed and you get the best product possible. Superior customer service and support MAINTENANCE Manual Override Calib. Actuator Set Clock Switch F/C Set Unit Name Set Main Display Hysteresis De-Icing Warnings TempProbe Motor Curves Averaging On/Off Averaging Setup Humidity Factor Startup Timer Restore Settings Save Settings Cost effectiveness, second to none VIEW LOGS Daily Log Alarm Log Audit Log Erase All Logs Year-after-year, our experts train all Phason dealers, and others in our value chain, to support the Supra and other Phason controls. We also offer Phason s own technical support and service hot line. All service bulletins, user manual updates, and other relevant information, are available on our website at www.phason.ca. This means you always have access to the latest and most accurate information available. DIAGNOSTICS Display Inputs Power Supply View rly stages Set rly stages View VAR Stages Set VAR Stages Change Version Force Reset The Supra s onboard diagnostics make sure important internal systems are working as intended. The Supra s easy-to-read user manual includes configuration and programming worksheets, as well as troubleshooting sections. The five-level PIN security system allows you the facility manager to prevent unauthorized changes to configurations and settings. We know of no other electronic control used for these or similar commercial purposes which provides so many important features and benefits for so modest an investment. SECURITY Security On/Off Change PIN Add User SETTINGS Remove User Group Setpoint Heat/Cool Stages One alarm relay (for external alarm siren or alarm system) Growth Curve Curtains Four-zone temperature monitoring and control Alarms Actuators Outdoor temperature monitoring ability Duty Cycle Timed Events Adjustable temperature settings, including two configurable seven-step Water Meter growth curves Humidity Control Temp Setback Temperature setback for day/night temperature (DIF) control Tunnel Mode More great features Water usage monitoring ability Humidity monitoring and control ability Startup timer for distributing backup generator initial startup load Three-second full-power-turn-on for minimizing fan ice-up Logging of temperatures, alarms, relay on durations, and setting changes Power-failure memory protection, including internal 24-hour clock Four-line, backlit LCD display Thirty-foot temperature probe, extendable to 500 feet (additional probes available) Rugged enclosure (corrosion and water resistant, fire retardant) Two-year limited warranty 4 12 Supra accessories make the Supra even more versatile Single-Phase Slave...increase the capacity of your Supra SupraWare...configure and monitor your Supras from a computer The Single-Phase Slave has a 20 A variable AC stage for controlling loads such as variablespeed fans or heat lamps. SupraWare eliminates the need to go to a control to check settings or make changes; you can do it all from one location. Connect up to 32 Supras together at distances up to 4000 feet (1220 metres). Installation is simple and there is no additional configuration required; all slave units follow the programs and settings of the Supra. Temperature probes are available in 1, 6, 30, 75, or 150-foot cable lengths and can extended up to 500 feet using extension cable. Extension cable is available in 500-foot lengths. Easy-to-read displays show control settings, temperatures, and alarms. SupraWare maintains logs of temperatures, alarms, and system changes. The software includes a viewer, four reports, and a chart to help you analyze your information. 120/230 VAC, 50/60 Hz 7 FLA at 120/230 VAC, PSC motor 1/2 HP at 120 VAC, 1 HP at 230 VAC, PSC motor Relay stages 1/3 HP at 120 VAC, 1/2 HP at 230 VAC 360 W tungsten at 120 VAC Alarm relay 0.4 A at 125 VAC; 2 A at 30 VDC, resistive load 0.2 A at 125 VAC; 1 A at 30 VDC, inductive load The Supra has four temperature probe connections for monitoring different zones or outdoor temperatures. Relative Humidity Sensors...monitor and control humidity Relative Humidity Sensors come in two models, standard (RHS), and extended (RHS-P). The RHS monitors relative humidity at the Supra. The RHS-P monitors up to 100 feet away from the Supra. Using remote-access software and a phone line or Internet connection, you can monitor and control your system from anywhere with an Internet connection. Input 115 VAC, 50/60 Hz, 1 A Input: Variable AC output: 20 A, 2300 W at 115 VAC Temperature probes and extension cable Remote-access Electrical ratings You can connect up to six Slave units to a single Supra. Variable DC Expansion Kit The Variable DC Expansion Kit is a small, auxiliary circuit board that allows you to connect equipment requiring a 0 to 10 V input, such as variable frequency drives or modulating valves. The kit connects to a socket on the Supra s main circuit board and installs in seconds. The kit has four outputs you can configure for cooling or heating. Intaglio and SupraSaver...innovative and easy-to-use The Intaglio allows you to upgrade a Supra s firmware in seconds and can upgrade all the Supras at your site. Phason constantly improves and adds new features to their products. With the Intaglio, you can upgrade the firmware in the Supra as these features become available. The SupraSaver allows you to store a complete copy of a Supra s configuration and settings. You can use the SupraSaver to set up new Supras in seconds! Phason power contactors Power contactor relay (PC-240) includes power contactor relay and mounting hardware for easy mounting in an enclosure. Power contactor kit (122-1) includes power contactor relay, on-off-auto switch and label, snubber filter (reduces electrical noise), and mounting hardware for easy mounting in an enclosure. Power contactor unit (129-0) includes two power contactor relays, two on-off-auto switches, and two snubber filters, mounted in a large enclosure. The enclosure has room for two additional contactor relays or kits. Phason power contactors have the following ratings. 10.2 ma at 240 VAC Coil: Contact: 25 A at 240 VAC; resistive 1300 W at 120 VAC; tungsten 1 HP at 120 VAC; 2 HP at 240 VAC, motor power factor 0.4 Power contactors increase the load handling capacity of relays and help increase the life of your control system.

You told us what you needed......and we provided it CONFIGURATION Relay Stages 0 to 10V outputs Humidity Zone Powerful, versatile environmental control for your whole barn, building, or greenhouse The Supra has 4 variable stages for heating or cooling control and 12 relay stages for heating, cooling, actuator control, duty cycle, or timed events. You can set up and manage your unique control strategy using the Supra s keypad and easy-to-understand menu system. Feature list Relays Variable DC signal output MAIN MENU Settings Maintenance View Logs Security Configuration Diagnostics Factory Settings Slave unit capability Inlet actuator control Curtain control Tunnel ventilation mode Duty cycle and timed events Manual override Custom growth curves Four-zone temperatures Outdoor temperatures Humidity control Water use monitoring Programmable alarms De-icing start (VAR fans) Computer compatibility Upgradeable firmware Transferable settings CSA approval Two-year warranty Designed with quality and you in mind We designed the Supra so one unit can control an entire hog or dairy barn, poultry house, or greenhouse. For larger facilities, you can connect up to 32 Supras and operate them from a central computer using the powerful and convenient SupraWare software. Trustworthy, reliable performance over the whole productive life of the control The Supra, like every Phason control, was designed to our strict quality standards and is CSA certified. We test every Phason control yes, every unit we produce before it leaves our factory, ensuring it works as designed and you get the best product possible. Superior customer service and support MAINTENANCE Manual Override Calib. Actuator Set Clock Switch F/C Set Unit Name Set Main Display Hysteresis De-Icing Warnings TempProbe Motor Curves Averaging On/Off Averaging Setup Humidity Factor Startup Timer Restore Settings Save Settings Cost effectiveness, second to none VIEW LOGS Daily Log Alarm Log Audit Log Erase All Logs Year-after-year, our experts train all Phason dealers, and others in our value chain, to support the Supra and other Phason controls. We also offer Phason s own technical support and service hot line. All service bulletins, user manual updates, and other relevant information, are available on our website at www.phason.ca. This means you always have access to the latest and most accurate information available. DIAGNOSTICS Display Inputs Power Supply View rly stages Set rly stages View VAR Stages Set VAR Stages Change Version Force Reset The Supra s onboard diagnostics make sure important internal systems are working as intended. The Supra s easy-to-read user manual includes configuration and programming worksheets, as well as troubleshooting sections. The five-level PIN security system allows you the facility manager to prevent unauthorized changes to configurations and settings. We know of no other electronic control used for these or similar commercial purposes which provides so many important features and benefits for so modest an investment. SECURITY Security On/Off Change PIN Add User SETTINGS Remove User Group Setpoint Heat/Cool Stages One alarm relay (for external alarm siren or alarm system) Growth Curve Curtains Four-zone temperature monitoring and control Alarms Actuators Outdoor temperature monitoring ability Duty Cycle Timed Events Adjustable temperature settings, including two configurable seven-step Water Meter growth curves Humidity Control Temp Setback Temperature setback for day/night temperature (DIF) control Tunnel Mode More great features Water usage monitoring ability Humidity monitoring and control ability Startup timer for distributing backup generator initial startup load Three-second full-power-turn-on for minimizing fan ice-up Logging of temperatures, alarms, relay on durations, and setting changes Power-failure memory protection, including internal 24-hour clock Four-line, backlit LCD display Thirty-foot temperature probe, extendable to 500 feet (additional probes available) Rugged enclosure (corrosion and water resistant, fire retardant) Two-year limited warranty 4 12 Supra accessories make the Supra even more versatile Single-Phase Slave...increase the capacity of your Supra SupraWare...configure and monitor your Supras from a computer The Single-Phase Slave has a 20 A variable AC stage for controlling loads such as variablespeed fans or heat lamps. SupraWare eliminates the need to go to a control to check settings or make changes; you can do it all from one location. Connect up to 32 Supras together at distances up to 4000 feet (1220 metres). Installation is simple and there is no additional configuration required; all slave units follow the programs and settings of the Supra. Temperature probes are available in 1, 6, 30, 75, or 150-foot cable lengths and can extended up to 500 feet using extension cable. Extension cable is available in 500-foot lengths. Easy-to-read displays show control settings, temperatures, and alarms. SupraWare maintains logs of temperatures, alarms, and system changes. The software includes a viewer, four reports, and a chart to help you analyze your information. 120/230 VAC, 50/60 Hz 7 FLA at 120/230 VAC, PSC motor 1/2 HP at 120 VAC, 1 HP at 230 VAC, PSC motor Relay stages 1/3 HP at 120 VAC, 1/2 HP at 230 VAC 360 W tungsten at 120 VAC Alarm relay 0.4 A at 125 VAC; 2 A at 30 VDC, resistive load 0.2 A at 125 VAC; 1 A at 30 VDC, inductive load The Supra has four temperature probe connections for monitoring different zones or outdoor temperatures. Relative Humidity Sensors...monitor and control humidity Relative Humidity Sensors come in two models, standard (RHS), and extended (RHS-P). The RHS monitors relative humidity at the Supra. The RHS-P monitors up to 100 feet away from the Supra. Using remote-access software and a phone line or Internet connection, you can monitor and control your system from anywhere with an Internet connection. Input 115 VAC, 50/60 Hz, 1 A Input: Variable AC output: 20 A, 2300 W at 115 VAC Temperature probes and extension cable Remote-access Electrical ratings You can connect up to six Slave units to a single Supra. Variable DC Expansion Kit The Variable DC Expansion Kit is a small, auxiliary circuit board that allows you to connect equipment requiring a 0 to 10 V input, such as variable frequency drives or modulating valves. The kit connects to a socket on the Supra s main circuit board and installs in seconds. The kit has four outputs you can configure for cooling or heating. Intaglio and SupraSaver...innovative and easy-to-use The Intaglio allows you to upgrade a Supra s firmware in seconds and can upgrade all the Supras at your site. Phason constantly improves and adds new features to their products. With the Intaglio, you can upgrade the firmware in the Supra as these features become available. The SupraSaver allows you to store a complete copy of a Supra s configuration and settings. You can use the SupraSaver to set up new Supras in seconds! Phason power contactors Power contactor relay (PC-240) includes power contactor relay and mounting hardware for easy mounting in an enclosure. Power contactor kit (122-1) includes power contactor relay, on-off-auto switch and label, snubber filter (reduces electrical noise), and mounting hardware for easy mounting in an enclosure. Power contactor unit (129-0) includes two power contactor relays, two on-off-auto switches, and two snubber filters, mounted in a large enclosure. The enclosure has room for two additional contactor relays or kits. Phason power contactors have the following ratings. 10.2 ma at 240 VAC Coil: Contact: 25 A at 240 VAC; resistive 1300 W at 120 VAC; tungsten 1 HP at 120 VAC; 2 HP at 240 VAC, motor power factor 0.4 Power contactors increase the load handling capacity of relays and help increase the life of your control system.

Who is Phason? Phason is a world leader in the development of technologicallyadvanced environmental controls, environmental monitoring systems, and production management systems. Phason was established in 1985 and is headquartered in Winnipeg, Manitoba Canada. We have a long history of innovation, growth, and stability. Phason contributes 20% of annual revenue to research and development. Phason is committed to technological advancement and innovations innovations designed to help our customers achieve higher productivity and lower production costs. Phason follows strict guidelines when designing and building our products. For our customers, this means reliable, well-built, and dependable products. High reliability and cost effectiveness are two of the guiding principles that motivate all the employees of Phason. All our products are made from high-quality components and are built to withstand the most extreme conditions. Phason is a solutions company. We work with our customers to satisfy their needs. We take pride in the level of support and complete satisfaction we provide. At Phason, our goal is to provide not just a solution, but the best possible solution. Phason products and services Yes we make great ventilation controls, but we also do much more. Phason products include everything from basic manual speed controls to advanced, integrated control and monitoring systems. Phason offers: Ventilation and environmental controls Programmable lighting controls Evaporative cooling controls Integrated production management systems Control and power accessories Standalone control software Electronic fence chargers Technical support and services Custom manufacturing services At Phason, our goal is to provide you with the right solution. Whether you are in the hog, poultry, greenhouse, dairy, or light-industrial business, we have a production or control solution for you. Your Phason dealer 2 Terracon Place Winnipeg, Manitoba Canada R2J 4G7 Phone: 204-233-1400 Fax: 204-233-3252 E-mail: sales@phason.ca Web site: www.phason.ca Copyright Phason Inc. All rights reserved Printed in Canada