F Series - Refrigeration dryers Quality compressed Air Flows from 0,38 to 110 m 3 /min
QUALITY, DRY COMPRESSED AIR: THE EFFECTS: Considerably reduced production costs. Circuit protected against corrosion. Prevents wear, and instrument malfunction.
protected niche. The air connections perfectly match CompAir s Filters and the optional air by-pass with integrated pre-filter allows quick installation. Dry, clean compressed air. Using state of the art technology, backed by a wealth of experience from making thousands of refrigerant dryers. The ecology and the economy for the quality F Series refrigeration dryers from Top performance and peace of mind A modulating hot-gas by-pass valve CompAir are the final result of an ensures optimum dew point control intensive research and development under all operating conditions. program. Technical experts produced The pressure actuated control immediately reacts to variations in this innovative range, according to the airflow guaranting the dew point. All strict ISO 9001 Quality standards. models are available up to 12 barg (15 barg standard up to 8,35 m 3 /min; 16 The result is the new benchmark in barg on request from 11 m 3 /min) and Refrigeration Dryers. Airflows have perform within a wide generous range of ambient and compressed air been carefully matched to the temperatures, ensuring optimum requirements of today s Air performance whatever the application. Advanced yet simple design Scroll compressors (from 11 m 3 /min) significantly reduce power consumption, avoid pulsations, and reduce noise levels. The design allows for the elimination of the crankcase heater, ensuring fail-safe start-up and operation. The field-tested electronic control (from 11 m 3 /min) features alarms with fault history, remote control, hour counter and alarm/warning contacts. Protects your investment All models are protected from overheating or excess current within the compressor. Further protection is offered by a fan pressure switch, high temperature thermostat and high pressure switch on models from 11 m 3 /min. In addition a low pressure gauge (from 11 m 3 /min) monitors the refrigerant pressure, a key indicator to the Dryer s health. Compressors, ensuring optimum performance, and guaranteed dew points. Quality components and modular design ensure CompAir s reputation for reliability is fully Easy to install and operate With frontal access to all major components, positioning the dryers is simple. All models are fitted with a effective condensate drain (electronic drain on request), positioned in a maintained. Environmentally friendly refrigerant and insulation are standard cold air across the range and all the dryers materials have been carefully selected for their recyclability at the end of the products life. 3 0 C demister cold air evaporator R407C warm air air to air hot air warm air condensate refrigerant
The heart of the Dryer The heart of the dryer is the ultra-compact module that includes an air-to-air heat exchanger, evaporator and service free demister separator. The dryer is excluded from pressure vessel approvals, ensuring trouble-free installation worldwide. Futhermore, refrigerant charges have been reduced by 20%, benefiting the environment. Larger models feature up to 6 exchanger modules. This unique feature improves delivery times and allows drastic reductions in maintenance costs as only a single module needs to be substituted in the unlikely event of a fault. Refrigerant outlet Air-to-air heat exchanger Air inlet Demister separator Evaporator Dew point sensor connection Air outlet Condensate outlet Refrigerant inlet Model F4 F6 F9 F13 F18 F26 F30 F37 F45 F53 F70 F84 30 C 0.45 0.66 1.13 1.50 2.26 3.13 3.56 4.33 5.08 6.16 7.83 9.35 Capacity m 3 /min 35 C 0.38 0.57 0.93 1.27 1.77 2.60 3.00 3.66 4.50 5.33 7.00 8.36 at stated air 40 C 0.33 0.48 0.76 1.05 1.52 2.11 2.51 3.04 3.76 4.36 5.83 6.96 inlet temperature 30 C 15.89 23.31 39.91 53.0 79.81 110.5 125.7 152.9 179.4 217.54 276.5 330.2 cfm 35 C 13.42 20.13 32.84 44.85 62.51 91.82 105.9 129.3 158.9 188.23 247.2 295.2 40 C 11.65 16.95 26.84 37.08 53.68 74.51 88.64 107.4 132.8 153.97 205.9 245.8 Nominal power adsorbed kw 0.18 0.18 0.26 0.3 0.42 0.5 0.55 0.6 0.75 1.13 1.35 1.45 Air Connections G 1 1 1 1 1 1 1 1 width 650 1000 Dimensions mm height 600 815 depth 196 360 Weight kg 35 35 40 41 45 47 47 78 83 93 102 102 Refrigerant R134a Max air inlet temperature C 55 Model F110 F140 F180 F220 F270 F370 F450 F600 F770 F900 F1100 30 C 13.2 16.8 21.7 26.5 32.4 44.6 54.1 72.2 92.7 108.4 132.0 Capacity m 3 /min 35 C 11.0 14.0 18.0 22.0 27.0 37.0 45.0 60.0 77.0 90.0 110.0 at stated air 40 C 9.2 11.7 15.0 18.5 22.5 31.0 37.8 50.3 64.7 75.8 92.4 inlet temperature 30 C 459 586 756 924 1127 1553 1884 2511 3226 3771 4662 cfm 35 C 388.5 494.4 635.7 776.9 953.5 1307 1589 2119 2719 3178.3 3885 40 C 322 409 523 645 783 1078 1314 1750 2249 2638 3263 Nominal power adsorbed kw 1.21 1.60 1.99 2.09 2.72 3.25 4.31 5.50 8.53 8.14 10.5 Air Connections G 2 2 2 DN80 DN80 DN80 DN100 DN100 DN125 DN125 DN150 width 920 1010 Dimensions mm height 1015 1500 depth 672 1310 1810 Weight kg 140 144 150 400 420 450 470 550 580 590 660 Refrigerant R407C Max air inlet temperature C 50
Innovative Scroll compressors considerably reduce the absorbed power and noise level, without compromising performance. Precise The control panel is positioned on the front for simple use, and also for a visual guarantee of a constant pressure dew point. Efficient The timed electrical condensate drain is positioned in a protected niche. Under control A by-pass regulator controls the cooling capacity, precisely controling the refrigeration circuit containing, CFC free, and ozone friendly gas. Working Pressure bar g 3 4 5 6 7 8 9 10 11 12 13 Correction Factor F4-F84 0.70 0.80 0.88 0.94 1.00 1.04 1.06 1.09 1.10 1.12 1.14 F110-F1100 0.74 0.84 0.90 0.96 1.00 1.04 1.06 1.09 1.11 1.13 1.14 Ambient Temperature C 25 30 35 40 45 Correction Factor F4-F84 1.00 0.96 0.90 0.82 0.71 F110-F1100 1.00 0.96 0.92 0.88 0.83 Performances refer to air-cooled model with air suction of FAD 20 C. 1 bar. and the following operating conditions: 7 barg working pressure. 3 C pressure dew point. 25 C ambient temperature. 35 C compressed air inlet temperature. All indicated data refers to ISO 7183. Models F4 to F84 standard 15 barg. Models F110 to 1100 standard 12 barg. 16 barg available on request. Water cooled version are available from model F220.
The Global Player Where our customers are concerned quality is not just a word but reality. From the early planning stage to start-up and after-sales service, we can provide the answers where compressed air is concerned worldwide Complete capability compressed air to suit all applications Lubricated Compressors (0.1 to 43 m 3 /min,.75 to 250 kw) Single Stage Speed Regulated Piston Compressors Oil Free Compressors (0.1 to 43 m 3 /min,.75 to 250 kw) Two Stage Piston Compressors Water Sealed Complete Accessories Programme Filters and Dryers Cooling Systems Heat Recovery Condensate Management Air Receivers Multi Set Controllers Compressor Lubricants Complete Service for Compressed Air Technology Engineering of Complete Compressor Stations Computer Assisted Demand Analysis Local Service Centres Guaranteed Parts Availability www.compair.com CompAir policy is one of continuous improvement and we therefore reserve the right to alter specifications and prices without prior notice. All products are sold subject to the Company's conditions of sale. Brochure re-order ref: Print ref: AGB/AGB/7.00 Printed in England CompAir is an Invensys company