indass METAL CHIP AND COOLANT MANAGEMENT PLANTS 1
Industrie Associate s history Industrie Associate s factory 2 Production department
CONVEYORS Vertical Centrifuges Wet metal swarf can contain up to 25% of coolant. The centrifuge allows removal of coolant from short chips. Available as stand alone unit it can also be integrated into the MINISYSTEM. Depending on the material and cutting fluid it is possible to obtain dryness of less than 2%. It is designed for heavy-duty continuous operation and include hardened components to reduce wear and prolong life. Chips are automatically blown out while at the same time coolant is separated. Centrifuges FEATURES OF VERTICAL CENTRIFUGES: Minimal footprint area Automatic operation Can be placed under the machine tool conveyor discharge Easy maintenance SCED10 model can be integrated into the spinning system Minisystem MODEL SCED5: Basic centrifuge SCED5 Centrifuge SCED5 equipped with support Centrifuge SCED5 equipped with support and vibrating screen MODEL SCED10: Basic centrifuge SCED10 Model SCED 5 SCED 10 Throughput kg/h* 100 130-150 Power 0,5 kw 4 kw Dimensions (mm) 500 x 500 x 495 860 x 710 x 960 Centrifuges weight 95 kg 315 Kg * Indicative data 3
Centrifuges Horizontal centrifuge The drying process of the horizontal centrifuge is designed on a horizontally suspended drum where the coolant is separated by means of a wedge bar screen. The centrifuge is entirely emptied out of dry chips and coolant and automatically cleaned (with compressed air) after been switched off. This feature allows handling different materials within same unit and is ideal for installations and works with no manual service. It handles any type of swarf shorter than 30mm. SCE line can also be integrated into the SYSTEM. Chip inlet Screen for oil extraction Horizontal basket SCE20 centrifuge Technical data SCE 20 SCE 30 SCE 40 Throughput Kg/h* 300-500 1000-1500 3000-5000 Power 4 Kw 11 Kw 18,5 Kw Dimensions (mm) 1115x1015x 835 1145x1355x1492 1550x2250x1850 Max cap. volume 2,3 m³/h 5,7 m³/h 7,6 m³/h Weight kg 415 800 1400 MAIN FEATURES: Easy maintenance Heavy duty construction High productivity Designed for modularity Can handle different materials Automatic self-cleaning function * Indicative data 4 SCE20 centrifuge SCE30 centrifuge
CONVEYORS GrinderS Suitable for cutting long chips. It doesn t accept solids or bar ends among chips. The ejection of any piece must be done manually. It is equipped with a single rotating shaft with inserts and pusher to push the material against the shaft, so that it could be hooked and cut. Crushers TR400 grinder equipped with support TR400 grinder equipped with support and vertical centrifuge SCED5 Technical data TR250 TR400 Power 2,2 kw 7,5 kw Dimensions (mm) 1245 x 714 x 500 1450 x 800 x 600 Weight 336 kg 450 kg Crushers Metal chips of any kind and shape can be conveyed into the hopper where the rotating arm directs the material on its side where the crusher s fixed knives contribute to reduce the metal curls into smaller pieces. Final crushing stage is achieved on the lower section by the fixed rotating cutting gears. The ejector systems automatically discharges bar-ends and parts, maximizing uptime and protecting equipment from damage. Rotating arm Knives Bar end rejector device Rotating cutting gear Chip discharge SCR20 crusher Crusher capacity: 1000 kg/h for cast iron Crusher capacity: 800-1000 kg/h for steel Technical data SCR10 SCR20 SCR25 Power kw 7,5 15 22 Throughput kg/h* 500 1000 3000 Voltage 400 400 400 Weight kg 980 1600 1960 Dimensions (mm) 600x900 750x1500 1200x2000 * Indicative data 5
Minisystem MinisyStem The MINISYSTEM is the ideal plug and play integrated solution for drying chips and for coolant recovery. Easy to install and to be positioned inside the factory. Hopper conveyor feed to centrifuge Small vibrating screen to remove solids / bar ends SCED10 vertical centrifuge Skid MAIN FEATURES: Small and compact dimensions Plug and play Easy handling Designed for modularity Excellent price/quality ratio Low energy consumption Technical data MINISYSTEM Throughput kg/h* 130-150 Power 4,5 kw Dimensions (mm) 3300 x 600 x 1800 System weight 800 kg * Indicative data MINISYSTEM INTEGRATIONS WITH ADDITIONAL MODULES: Minisystem with hopper 800 lt + skiphoist 250-300 lt Minisystem with hopper 500 lt + crusher and vibrating screen 6 Minisystem with turner skiphoist + crusher + vibrating screen Minisystem with conveyor to feed the container
CONVEYORS SYSTEMS Modular and flexible systems, placed on a skid. The system is designed with modularity concept. This means that adding modules to feed, treat and stock chips is simple. Here some examples of possible integration with additional modules to solve most common needs. Systems Vibrating screen SCE 20 or SCE 30 horizontal centrifuge Conveyor for feeding the centrifuge Skid MAIN FEATURES: Heavy duty construction Large output production Plug and play Designed for modularity Equipped with drag conveyor for sludge for recirculating heavy particles and filtering the oil. TECHNICAL DATA SYSTEM 20 SYSTEM 30 Throughput kg/h* 400-600 1000-1500 Power consumption 5,54 kw 12,54 kw dimensions (mm) 4650 X 2000 X H 2660 5150 X 2000 X H 3445 System weight 1610 2830 * depending on the material SYSTEM INTEGRATIONS WITH ADDITIONAL MODULES: System with crusher SCR20 System with turner skiphoist and crusher 7
Installations installations Minisystem with 800 lt hopper Raised Minisystem to load big bags Minisystem with 800 lt hopper Double Minisystem for two materials SOME EXAMPLES OF INSTALLATIONS 8 Minisystem with turner skiphoist Minisystem with crusher and turner skiphoist
CONVEYORS installations Installations Crusher SCR20 + centrifuge SCE20 400 kg/h for steel Turner skiphoist + crusher SCR20 + centrifuge SCE20 500 kg/h for stainless steel Centrifuge SCE20 and conveying system 400 kg/h for aluminium Crusher SCR25 + centrifuge SCE30 800 kg/h for stainless steel - Inconel SOME EXAMPLES OF INSTALLATIONS Centrifuge SCE20 400 kg/h for steel Centrifuge SCE30 1500 kg/h for brass 9
Filtration systems FILTRATION SYSTEMS Metalworking fluids affect the financial health of a company not only in terms of what they cost to manage, but also in how they perform. An efficient management can lead to improving: Tool life Equipment life Process downtime Scrap and rework Reduced waste Filtration systems for coolant coming from grinding machines and machining centers OPERATION Suitable for coolant coming from grinding machines and machining centers. Modules of 250, 500, 750 up to 2000 lt/min The dirty coolant comes from the machine tools and enters the self-cleaning filter. When the electro-level signals a high level of fluid, due to the clogging of the cloth, the reductor starts and make the brush for a first cleaning, the cloth and the drag conveyor move. The second cleaning is a done in backwash, using the clean oil coming from the tank placed under the filtration system. A magnetic separator could be added before the filtration system, in case of magnetic material to be filtered. Filtration level up to 15 microns. 10
CONVEYORS FILTRATION SYSTEMS FILTRATION SYSTEMS FOR THE TREATMENT OF COOLANT, COMING FROM CHIP SPINNING PROCESSES Filtration systems Drag conveyor equipped with drum filter Drag conveyor equipped with drum and self cleaning filter OPERATION Suitable for filtering the coolant coming from the centrifuges. The drag conveyor could be equipped with a rotary drum filter for a filtration level up to 85-100 microns, or with rotary drum filter and self-cleaning, for a filtration degree up to 20-25 microns. FEATURES: Low maintenance Small overall dimensions FILTRATION SYSTEMS FOR MACHINING CENTERS Centrifugal coolant filter FC1100, version A. The coolant, after the centrifugal process, goes back into the conveyor tank of the machine tool, via tubes, because the centrifuge is placed lower compared to the conveyor tank. The version A is not equipped with booster pump and tank Centrifugal coolant filter FC1100 version B. The version B is equipped with booster pump and tank to allow the coolant, after the centrifugal process, to go back into the conveyor tank of the machine tool. The centrifuge is placed higher compared to the conveyor tank. FEATURES: Filtration level up to 5-10 microns Not self-cleaning Mobile unit 11
indass Chip and lubricant treatment plants Swarf conveying lines Industrie Associate S.r.l. Via Giorgio La Pira, 12-25021 Bagnolo Mella (Bs) Italy Tel. 0039 030.6829811 - Fax 0039 030.6829888 info@indass.it - www.indass.it