CONTROLS FOR TOWEL RAILS ErP STONE ECO PLUS pag. 06-07 ErP WHISTLE ECO PLUS pag. 08-09 DUETTO pag. 10-11 MOEBIUS pag. 12-13 AQUARIUS pag. 14-15 VARIHEAT pag. 16-17 POSEIDONE PW pag. 18-19 SHORTY PW pag. 20-21 00-03 - 0718
CONTROLS FOR ELECTRIC RADIATORS ErP WIZZY ECO PLUS pag. 22-23 ErP INGOT pag. 24 IOT PLATFORM CONNETTENDO pag. 26-27 ZOPPAS INDUSTRIES HEATING ELEMENT TECHNOLOGY S CONSTANT ATTENTION TO THE MARKET The constant evolution of Zoppas Industries Heating Element Technology s concept of supply, no longer tied to a single component but to an integrated solution, has led us to develop increasingly avant-garde products that fully satisfy the needs of the market, in close collaboration with our customers. Our design office is at your disposal to plan customized solutions. DESIGN & ERGONOMICS Common characteristics Zoppas Industries Heating Element Technology offers a range of products where attention to aesthetics and simplicity of use become essential and indispensable characteristics. HYGIENE Quick and easy The Zoppas Industries Heating Element Technology range foresees the use of quality external plastic materials, making the product quick and easy to clean. STRENGTH For a long working life Zoppas Industries Heating Element Technology products are built with materials that will not change over time and are able to guarantee durability, even during intense use. CERTIFICATIONS Safety and guarantee All Zoppas Industries Heating Element Technology products conform to the standards in the EN 60335 or EN 60950 group, each depending on its field of application, and to the RoHS directive. 00-04 - 0718 00-05 - 0718
STONE ECO PLUS - ECODESIGN COMPLIANT Ambient temperature control STONE is a Bluetooth Low Energy room temperature control for electric towel rails filled with water, water and glycol or diathermic oil. It must be used in combination with a Zoppas Industries heating element. The innovative Bluetooth User interface enables the control of the towel rails with a dedicated App from a device such as a tablet or smartphone both in Android or ios operative systems. The smart interface offered by the App maximizes the usability of the device and increase the number of innovative features such as the weekly programming, software upgrade, energy consumption and remote diagnostic. The control offers a stylish onboard interface with a new OLED display capacitive buttons and RGB led. ECODESIGN COMPLIANT with open window detection and integrated WEEKLY program. STONE is available in two different versions, the standard version and wall-in version witha switch and a telescope to cover the power cord installed in the wall. APPLICATION STONE CONNECT BLE Available on: BLE APPLICATION (ANDROID & ios) Control individual towel rails with your Android and ios App. Improve your home s heating performance and save on your energy costs. Schedule your day with an easy and intuitive interface. Electronic room temperature control for towel rails filled with water, water and glycol or diathermic oil Power mode: control the power of the heating element fitted in the towel rail (only via APP) High precision electronic PID temperature regulation Weekly program Boost function 6-orders pilot wire option Dedicated On/Off button Energy consumption statistic (via App) Compact design Embedded temperature sensor Software upgrade function (via App) Open window detection ErP RED: (2014/53/EU) Radio Equipment Directive ErP: 2009/125/EC Energy related Products EcoDesign ErP: COMMISSION REGULATION (EU) 2015/1188 COMMISSION REGULATION (EC) 1275/2008 Radio Interface Weekly Programming Fil-Pilote Boost EC1275-2008 Eco Design I & II 1800 W Electronic PI or power regulation mode with microprocessor (Relay) IPx4 48 x 75 x 50 mm 0.25 kg White, Chrome (mirror finishing) Bluetooth Low Energy (app ios and Android) up to 13 temperature set per day by App 6 orders (Only class II) Yes, programmable by App 0 to 50 C @ 85 % humidity 00-06 - 0718 00-07 - 0718
WHISTLE ECO PLUS Ambient temperature control WHISTLE ECO PLUS Room temperature control WHISTLE ECO PLUS is an electronic thermostat for towel rails. It is used to control room temperature without being affected by external conditions or by the temperature of the towel rail. The display shows all the settings on the product. The operating modes can also be controlled via Fil-Pilote (option available only in a class 2 product). ECO-DESIGN COMPLIANT with open window detection and integrated weekly program. WHISTLE ECO PLUS is an electronic control unit designed to regulate the room temperature with two levels of settings. It has also a boost function at maximum power for two hours and a timer function to select one of the two temperatures set depending on the time and the day of the week. It must be used in combination with a Zoppas Industries heating element. The display shows the time, the day of the week, the temperature set, weekly program graph and the operating modes. ON/OFF button changes the operating mode, sets the bar of the weekly program graph and the room temperature. The operating modes are: room temperature level (regulates the temperature not considering the timer program), timer, anti-freeze (energize the heater when room temperature is below 7 C), boost function and Fil- Pilote (via black dedicated wire). Electronic room temperature control for towel rails filled with water, water and glycol or diathermic oil High precision PID electronic temperature regulation Room temperature regulation from 15 C to 30 C 6-orders Fil-pilot available on request Weekly program Compact design Boost mode function Embedded temperature sensor Open window detection mode ErP ErP: 2009/125/EC Energy related Products EcoDesign ErP: COMMISSION REGULATION (EU) 2015/1188 COMMISSION REGULATION (EC) 1275/2008 Weekly Programming Fil-Pilote Boost Eco-Design I, II and II with Fil-Pilote 2000 W Electronic PI with microprocessor (Relay) IPx4 72 x 140 x 60 mm 0.25 kg White, Chrome Yes 6 orders (Only class II with Fil Pilote) 2H 0 to 50 C @ 85% Humidity Equipped with weekly program and open window detection 00-08 - 0718 00-09 - 0718
DUETTO Surface temperature electronic control for towel rails DUETTO is an electronic thermostatic water temperature heating system for towel rails filled with water, water and glycol or diathermic oil. The heating system is represented by an electronic thermostatic control fixed to a Class I electric heating element integrating an NTC water temperature sensor and a safety thermal fuse. The heating system regulate the temperature of the water inside the towel rail. Two models are available: - DUETTO: with cable - DUETTO WALL-IN: with hidden connection. Both available in CHROME or WHITE RAL 9016 colors. The heating system can be installed in a stand alone towel rail or a towel rails connected to the central heating system. Water temperature regulation range: from 7 C to 60 C. Main operative modes Antifreeze Water temperature regulation @ 7 C Electronic thermostatic water temperature heating system for towel rails filled with water, water and glycol or diathermic oil Suitable for both stand alone towel rail or a towel rails connected to the central heating system Water temperature regulation range from 20 C to 60 C (using the knob) Antifreeze: 7 C Boost mode 3h: regulation at maximum water temperature 60 C for 3hrs 2 Timers: regulation at maximum temperature 60 C for 3hrs with 24h repetition Up to 1 hour of memory retention in case of electricity disconnnection LED RGB Compact design Supplied as one unit with thermostatic control and electric heating element fixed together EN60335-2-43 Timer mode Water temperature regulation @ maximum temperature 60 C for 3hrs with 24h repetition 2 possibility to set two timer modes Boost Timers I 1500 W Hysteresis with microprocessor (Relay) IPx4 100 x 60 x 50mm 0.40 kg White, Black, Chrome (mirror finishing) 3H Programmable 0 to 50 C @ 85 % humidity Two timers 3hrs maximum temp. with 24h repetition 00-010 - 0718 00-011 - 0718
MOEBIUS Surface temperature electronic control for towel rails MOEBIUS is a is an electromechanical thermostatic water temperature heating system for towel rails filled with water, water and glycol or diathermic oil. The thermostatic control is fixed to a PTC Class I heating element and have a cable. The heating system can be installed in a stand alone towel rail or a towel rails connected to the central heating system Water temperature regulation range from 5 C to 70 C. Electromechanical thermostatic heating system water temperature heating system for towel rails filled with water, water and glycol or diathermic oil Suitable for both stand alone towel rail or a towel rails connected to the central heating system Water temperature regulation range from 5 C to 70 C Compact design (52mm dia) adapt to vertical and horizontal mounting Supplied as a kit with PTC heating element ½ threaded connection Easy to use: knob with LED interface EN60335-2-43 I 150 W 300 W 600 W - 800 W Electromechanical switch with PTC heater and capillary bulb IPx4 76 x 52 x 87 mm 0.20 kg (without heater) White, Chrome 0 to 70 C @ 85 % humidity 00-012 - 0718 00-013 - 0718
AQUARIUS Surface temperature electronic control for towel rails AQUARIUS is an electronic thermostatic water temperature heating system for towel rails filled with water, water and glycol or diathermic oil. The control is assembled with a Class I electric heating element provided with an NTC water temperature sensor and a safety thermal fuse. The heating system regulate the temperature of the water inside the towel rail. Three models are available: - AQUARIUS S: Water heating regulation. - AQUARIUS ST: Water heating regulation with timer. - AQUARIUS RT: Reducted water heating with timer. Both in CHROME or WHITE RAL 9016 versions. Setting water temperature range: from 20 C to 65 C (20 C to 40 C for RT version). AQUARIUS S AQUARIUS S is a water temperature electronic control for towel rail. The knob sets the thermostat operating mode: stand-by and water temperature regulation. Water temperature can be regulated from 20 C to 65 C. Electronic thermostatic water temperature heating system for towel rails filled with water, water and glycol or diathermic oil. Easy to use: knob with monochromatic LED interface Programmable water regulation for 2h repeated every 24h (RT and ST version) Compact design Supplied as one unit with thermostatic control and electric heating element fixed together EN60335-2-43 AQUARIUS ST AQUARIUS ST is a water temperature electronic control for towel rail with a timer function. The knob sets the thermostat operating mode: stand-by, water temperature regulation and timer. The timer functions allow to programming a water temperature regulation at the chosen level for 2 hours every day (24h). The regulation temperature spaces from 20 C to 65 C. AQUARIUS RT AQUARIUS RT is a water temperature electronic control for towel rail with a timer function. The knob sets the thermostat operating mode: stand-by, water temperature regulation and timer. The timer functions allow to programming a water temperature regulation at the chosen level for 2 hours every day (24h). The regulation temperature spaces from 20 C to 40 C. I & II 150 W 300 W 600W 900W Hysteresis with microprocessor (Relay) IPx4 140 x 45 x 50 mm 0.20 kg (without heating element) White, Chrome 0 to 50 C @ 85 % humidity 00-014 - 0718 00-015 - 0718
VARIHEAT Surface temperature electronic control for towel rails VARIHEAT is an electronic thermostatic water temperature heating system for towel rails filled with water, water and glycol or diathermic oil. The thermostatic control is fixed to a Class I electric heating element provided with an NTC water temperature sensor and a safety thermal fuse. The heating system regulate the temperature of the water inside the towel rail using the bottom knob. The temperature set point is showed by four LEDs placed just above the bottom knob. The outer diameter of VARIHEAT is 32mm. Water temperature regulation range: from 35 C to 65 C Electronic thermostatic water temperature heating system for towel rails Totally integrated with the Towel Rail design Easy to use: knob with LED interface Compact design Mechanical strength: housing made in steel Supplied as one unit with thermostatic control and electric heating element fixed together Water temperature regulation range: from 35 C to 65 C Antifreeze mode: 5 C Standard wattages: 200W - 400W - 600W EN60335-2-43 Dimensions (D x H) I 200 W 400 W 600W Hysteresis with microprocessor IP55 32 x 95 mm 0.20 kg (without heating element) White, Chrome 0 to 50 C @ 85 % humidity 00-016 - 0718 00-017 - 0718
POSEIDONE PW Power control for towel rails POSEIDONE PW is an electronic power control designed to be used in towel rails for drying towels. It must be used in combination with a Zoppas Industries heating element and regulate its electric power using a dedicated knob. POSEIDONE PW is designed to make an easy and quick installation. POSEIDONE PW has two Boost functions at maximum power for one or two hours. It has a control knob to set the power level and stand-by mode. The power level control knob allows the user to switch from stand-by mode, left position, to power regulation mode. Linear regulation from 20% to 100% of power of the heating element. The LED is red when the heating element is ON while is green when the heating element is OFF. In Stand-by mode the LED is OFF. Electronic power control designed to be used in towel rails filled with water, water and glycol or diathermic oil Power regulation range: from 20% to 100% (linear) Two boost mode functions Compact design Quick and easy installation EN60335-2-43 Boost Power Level The two buttons activate the Boost function at maximum power for one or two hours. I & II 2000 W Electronic with microprocessor (Relay) open loop control IPx4 72 x 140 x 60 mm 0.25 kg White, Chrome 2H, 1H 0 to 50 C @ 85% Humidity From 20% to 100% of the nominal power of the heating element 00-018 - 0718 00-019 - 0718
SHORTY PW Power control for towel rails SHORTY PW is an electronic power control designed to be used in towel rails for drying towels. It must be used in combination with a Zoppas Industries heating element and regulate its electric power using a dedicated knob. SHORTY PW SHORTY PW It is an electronic power level control that regulates the power of the heating element fitted into the towel rail. The power level control knob allows the user to switch from stand-by mode, left position, to power regulation mode. Linear regulation from 20% to 100% of power of the heating element. Position 9 means full power to the heating element constantly. SHORTY SW SHORTY SW is an ON - OFF control for the towel rail heating element. The switch controls the switching on or off of the heating element inside the radiator, its lighted indicator immediately shows the status of the heater. Electronic power control designed to be used in towel rails filled with water, water and glycol or diathermic oil Available models: Electronic power level regulation (SHORTY PW) Simple ON/OFF switch (SHORTY SW) Very compact design Easy to use EN60335-2-43 SHORTY PW SHORTY SW I & II I & II power level from 20% to 100% of the nominal power Electronic with microprocessor (Relay) 2000 W IPx4 78 x 65 x 41 mm ON - OFF manual regulation 0.15 kg 0.13 kg White, Chrome 0 to 50 C @ 85% Humidity 00-020 - 0718 00-021 - 0718
WIZZY ECO PLUS Room temperature control for radiators - ECO DESIGN COMPLIANT WIZZY ECO PLUS is an electronic room temperature control for radiators. It must be used in combination with a Zoppas Industries heating element. The regulation is not affected by external conditions or the temperature of the radiator. The display shows all the settings on the product. The operating modes can also be controlled via Fil-Pilote (option available only in a class 2 product). The aestetic of WIZZY ECO PLUS perfectly fits the side of the cast aluminum radiator. The tilting position of the dispaly help to see and progrma the control. WIZZY ECO PLUS can be customized to achieve NF Performance standards with specific analysis e in a biclimatic room. ECO DESIGN COMPLIANT with open window detection and integrated weekly program. WIZZY ECO PLUS WIZZY ECO PLUS is an electronic room control with weekly program on two temperature levels (COMFORT and ECO). With the weekly program function, the user can choose the temperature between two different temperature levels for every hour of the days of the week. To improve the usability, the device have a backlight LCD display and a buzzer. The display shows the time, the day of the week, the temperature set, weekly program graph and the operating modes. Push Stand-by button to select the operating modes, set the bar of the weekly program graph and regulate the room temperature. The operating modes are: room temperature level (regulates the temperature not considering the timer program), timer, anti-freeze (energize the heater when room temperature is below 7 C), boost function and Fil-Pilote (via black dedicated wire). Open window detection mode for ErP Compliance. Electronic room temperature control for radiator High precision electronic PI temperature regulation Room temperature setting Boost mode 6-orders Fil-pilot available Stand-by Weekly program Compact design Embedded temperature sensor Open window detection for power savings Easy to use: interface with backlight display and buzzer ErP ErP: 2009/125/EC Energy related Products EcoDesign ErP: COMMISSION REGULATION (EU) 2015/1188 COMMISSION REGULATION (EC) 1275/2008 Weekly Programming Fil-Pilote Boost Erp II with Fil-Pilote 2000 W Electronic PI with microprocessor (Triac) IPx4 170 x 80 x 50 mm 0.28 kg White Yes 6 orders 2H 0 to 50 C @ 85 % humidity Open window detection, Weekly program, Stand-by consumption 00-022 - 0718 00-023 - 0718
INGOT - ECO DESIGN COMPLIANT INGOT is a digital programmable electronic regulation set for electric radiators. The set is composed of three different modules: - power PCBA with power cord - logic PCBA with sensor cord and connection to the power PCBA - PIR PCBA with connection to logic PCBA The kit includes plastic support and screws for fixation. The control set is compliant to latest NF Performance product requirements. www.connettendo.com Digital room temperature control for electric radiators with heat transfer fluid High precision electionic PID temperature regulation Weekly and daily programming Presence detector (optional) 6-orders pilot wire rempote programming Open window detection Energy consumption estimation (kwh) Backup reserve 3h to 5h Key lock and backlight display Consumption gauge indication (3 colors) ErP ErP: 2009/125/EC Energy related Products EcoDesign ErP: COMMISSION REGULATION (EU) 2015/1188 COMMISSION REGULATION (EC) 1275/2008 Weekly Programming Fil-Pilote II (Once assembled with heater body) with Fil-Pilote 2000 W Electronic PID with microprocessor (Triac) NA NA 0.15 kg White buttons Yes 6 orders 00-024 - 0718 00-025 - 0718
IoT Platform Connecting your devices, understanding your businnes Analytics for marketing opportunty, costumer profiling, supply chain optimization, predictive service and maintenance, real time tracking Costumer engagement, real time monitoring, preventive maintenance www.connettendo.com Smart Home experience, Energy saving, Enhanced user experience 00-026 - 0718 00-027 - 0718
Worldwide Local Supplier 50 Years of experience in design and production of heating elements and systems Poland Finland Romania Russia Production Office NOTE: Germany USA UK >7000 Our employees China France Mexico Switzerland Turkey 15 The countries where you can find us Brazil ITALY Serbia Providing heat solutions in well over different market sectors 200 ZOPPAS INDUSTRIES Partner Experience Zoppas Industries increasing efficiency using lean enterprise across all facilities and departments. Access our state-of-the-art laboratory facilities with over 30 years design experience. Benefit from Zoppas Industries manufacturing and design facilities which maintain Quality Management Systems according to ISO 9001, EN 9100, Environmental Management System according to ISO 14001 and Energy Management System according to ISO 50001. Access one of the widest Heating Element Technology product portfolios in the world including completely integrated thermal assemblies with sensors, connectors, enclosures, etc. Benefit from Zoppas Industries global presence through design and manufacturing facilities across Europe, North America, South America and Asia - lowering your Total Cost of Ownership (TCO) including reduced logistics, design, communication and support costs. Access Zoppas Industries in-house design, development and R&D capabilities, such as CAD 3D design, FEA, DOE, FMEA. Benefit from Zoppas Industries products third-party certification, such as UL and VDE: marking applied on customer s request. We at ZOPPAS INDUSTRIES put you in the front seat of internationalization - sourcing your local needs globally. COMPANY CERTIFICATIONS PRODUCT TRADEMARKS FM 11235 9191.IRCR 9196.IRC8 IT-75.12-6975 12/054P_IND EN 15085-2 IT-75.12-6975 12/055P_IND ISO 3834-3 Compliance with the mark of each specific product must be properly reviewed with our Sales Department. 00-028 - 0718
NOTE:
Via Podgora, 26-31029 Vittorio Veneto (TV) - Italy Tel. +39 0438 9101 - Fax +39 0438 912272-912236 www.zoppasindustries.com cod. 690955917-0718